REPEATER-MIB-2
AI MIB Summary
Standard SNMP MIB module defining data structures for REPEATER-MIB-2.
210
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
210 total| Object Name |
|---|
IRM-OIDSThis object defines the board type for the Management
board in the device. (eg. IRBM, IRM). See appendix A for
values.ro INTEGER .1.3.6.1.4.1.52.1.1.1.1 |
deviceNameAn ASCII name of the device that this agent manages.rw OCTET STRING .1.3.6.1.4.1.52.1.1.1.2 |
deviceIPAddressThe Internet address of this device. Write access is granted only
if SuperUser access is used.rw NetworkAddress .1.3.6.1.4.1.52.1.1.1.3 |
currentTimeThe current time of day as measured by the device in HHMMSS format.rw OCTET STRING .1.3.6.1.4.1.52.1.1.1.4 |
currentDateThe current date as measured by the device in MMDDYYYY format.rw OCTET STRING .1.3.6.1.4.1.52.1.1.1.5 |
mACAddressThe MAC (Ethernet) address of the MMAC. This
can also be obtained from address translation MIB.ro OCTET STRING .1.3.6.1.4.1.52.1.1.1.6 |
soidMINIMMAC OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1.2.3.1 |
soidMRXI OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1.2.3.2 |
device OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.1 |
deviceMMACTypeIndicates the type of MMAC.ro Enumeration .1.3.6.1.4.1.52.1.2.1.1.2 |
deviceSlotsNumber of available slots in this device including the IRM slot.ro Enumeration .1.3.6.1.4.1.52.1.2.1.1.3 |
deviceOccupiedSlotsThe slots that contain MIM boards.
This field is bit encoded (eg. If a bit is set then that board
is present. For example, a value of 3 indicates that there are
boards in the IRM slot and the first MIM slot.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.4 |
devicePortsOnA read will return the number of adminstratively ON ports for the device.
A write of a 1 will administratively enable all the ports
on the device, except for redundant ports.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.5 |
deviceTotalPortsThe total number of ports in the MMAC.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.6 |
deviceTotalPktsThe number of packets detected on all ports of this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.7 |
deviceTotalErrorsThe sum of all alignment, CRC, out-of-window collisions, runt,
and giant errors detected by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.8 |
deviceTransmitCollsThe number of transmit collisions detected by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.9 |
deviceRecCollsThe number of receive collsions detected by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.10 |
deviceAlignsThe number of packets with alignment errors detected by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.11 |
deviceCRCsThe number of packets with bad CRC detected by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.12 |
deviceRuntsThe number of runt frames detected by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.13 |
deviceOOWCollsThe number of out-of-window collisions detected by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.14 |
deviceNoResourcesThe number of no resource condtions detected by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.15 |
deviceRecBytesThe number of bytes detected on the network by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.16 |
deviceGiantFramesThe number of longer than 1518 byte packets detected by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.17 |
deviceRestartA read will return 0. A set of 0 will restart the device.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.18 |
deviceResetCountersA read will return 0.
A set of 0 will reset all the counters for the device, boards and ports.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.19 |
deviceRedundantCtsThe number of redundant circuits available for use.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.20 |
deviceTimeBaseThe number of seconds used as the interval for performing all of the
rate alarm checks. The minimum is 10 secs. There isn't a maximum.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.24 |
deviceResetRedundancyA read will return 0.
A set of a 1 will reset redundancy for the entire box.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.25 |
deviceSrcAddrAgingTimeThe number of minutes that a source address is not detected before
it is removed from the source address table. The minimum is 1 minute
and the maximum is 1440 minutes (max minutes in a day).rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.26 |
deviceSrcAddrTrapsControls sending of source address related traps.rw Enumeration .1.3.6.1.4.1.52.1.2.1.1.27 |
deviceSrcAddrLockedA set of 2 will disable all ports that support link status but do not have
link active, or is segmented. The first source address seen on each of the
remaining enabled ports, that have the type of station, will be the only
address allowed through that port. If any other address is seen the port
will be disabled.rw Enumeration .1.3.6.1.4.1.52.1.2.1.1.28 |
deviceEnetBoardMapThe slots that contain Ethernet MIM boards.
This field is bit encoded (e.g. If a bit is set then that board
is present and is an Ethernet MIM.) For example, a value of 3 indicates
that there are boards in the IRM slot and the first MIM slot and that
these boards are Ethernet MIMs.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.29 |
deviceTokenRingBoardMapThe slots that contain Token Ring MIM boards.
This field is bit encoded (e.g. If a bit is set then that board
is present and is a Token Ring MIM.) For example, a value of 2 indicates
that there is a board in the first slot and it is a Token Ring board.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.30 |
deviceFDDIBoardMapThe slots that contain FDDI MIM boards.
This field is bit encoded (e.g. If a bit is set then that board
is present and is a FDDI MIM.) For example, a value of 2 indicates
that there is a board in the first slot and it is a FDDI board.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.31 |
deviceRestoreDefaultsA get will return 0.
A set of 0 will restore all of battery backed RAM to factory defaults, with
the execption of the IP address, the community table and the modem
baud rate.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.32 |
deviceActiveUsersThe number of active users seen on this device.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.33 |
deviceBroadPktsThe sum of all of the broadcast packets detected on all
ports of this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.48 |
deviceMultPktsThe sum of all of the multicast packets detected on all
ports of this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.49 |
deviceThdPartyOccupiedSlotsThe slots that contain Third Party MIM boards. This field
is bit encoded (eg. if a bit is set then that board is present
and is a Third Party MIM.) For example, a value of 4 indicates
that there is a board in the third MIM slot (slot 4) and that
this board is a Third Party MIM.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.51 |
deviceImimOccupiedSlotsThe slots that contain IMIM boards. This field
is bit encoded (eg. if a bit is set then that board is present and
is an IMIM). For example, a value of 4 indicates that there is a
board in the third MIM slot (slot 4) and that this board is an IMIM.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.52 |
deviceLinkTrapsControls sending of link related traps.rw Enumeration .1.3.6.1.4.1.52.1.2.1.1.54 |
deviceSegTrapsControls sending of seg related traps.rw Enumeration .1.3.6.1.4.1.52.1.2.1.1.55 |
ctIPDefaultFrameTypeDefines the default frame type that will be used by the
device. A device will understand both frame types and will
respond based upon the framing type that is learned for
the given address. This object defines the type of framing
that will be used if no framing is known, for example ARP
requests.
Setting a value of 8022snap(2) will result in framing
802.3 - 802.2 - IP packets being generated by default.
Setting a value of ethernet(1) will result in framing
ethernet IP packets by default.rw Enumeration .1.3.6.1.4.1.52.1.2.1.1.56 |
board OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.2 |
port OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.3 |
sourceAddr OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.7 |
sourceAddrBoardThe board number of the port that the supplied source address has
been seen on.ro INTEGER .1.3.6.1.4.1.52.1.2.1.7.1 |
sourceAddrPortThe port number of the port that the supplied source address has
been seen on.ro INTEGER .1.3.6.1.4.1.52.1.2.1.7.2 |
redundancy OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.8 |
redundancyPollIntervalThe number of seconds between polls for redundancy.
The minimum is 0 and the maximum is 99.rw INTEGER .1.3.6.1.4.1.52.1.2.1.8.1 |
redundancyTestTodThe time of day at which the redundant circuits should be tested.rw OCTET STRING .1.3.6.1.4.1.52.1.2.1.8.2 |
redundancyPerformTestA read will return a 0.
A set of a 1 will test the redundant circuits now.rw Enumeration .1.3.6.1.4.1.52.1.2.1.8.3 |
redundancyCircuitNameThe name of the indicated circuit.rw OCTET STRING .1.3.6.1.4.1.52.1.2.1.8.4 |
redundancyRetryCountThe number of unanswered polls allowed for the indicated circuit
before the current connection is declared bad. The minimum is 0 the
maximum is 16.rw INTEGER .1.3.6.1.4.1.52.1.2.1.8.5 |
redundancyNumBPsThe number of board/port combinations associated with the indicated
circuit.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.6 |
redundancyCircuitBoardsThe boards associated with the indicated circuit, accessed by index.
Note: The instance identifier for this object is the circuit
number followed by an index. The index has no other meaning
than to be used as an index for the purposes of the GET NEXT
operation.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.7 |
redundancyCircuitPortThe ports associated with the indicated circuit, accessed by index.
Note: The instance identifier for this object is the circuit
number followed by an index. The index has no other meaning
than to be used as an index for the purposes of the GET NEXT
operation.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.8 |
redundancyCircuitTypesThe type of each port associated with the indicated circuit,
accessed by index.
Note: The instance identifier for this object is the circuit
number followed by an index. The index has no other meaning
than to be used as an index for the purposes of the GET NEXT
operation.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.9 |
redundancyCircuitNumAddrThe number of addresses associated with the indicated circuit.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.10 |
redundancyCircuitMACAddrAddA get will return a null string.
A set adds an ethernet address to the polling list for the
indicated circuit.rw OCTET STRING .1.3.6.1.4.1.52.1.2.1.8.11 |
redundancyCircuitMACAddrDelA get will return a null string.
A set deletes an ethernet address from the polling list for the
indicated circuit.rw OCTET STRING .1.3.6.1.4.1.52.1.2.1.8.12 |
redundancyCircuitMACAddrDispThe ethernet addresses associated with the indicated circuit,
accessed by index.
Note: The instance identifier for this object is the circuit
number followed by an index. The index has no other meaning
than to be used as an index for the purposes of the GET NEXT
operation.ro OCTET STRING .1.3.6.1.4.1.52.1.2.1.8.13 |
redundancyCircuitEnableEnables and disables the indicated circuit.rw Enumeration .1.3.6.1.4.1.52.1.2.1.8.14 |
redundancyCircuitResetA get will return 0.
A set of 1 will reset the indicated circuit, return all of the associated
board and ports to NOT-USED, remove associated addresses from the polling
list, reset the circuit name and retry count to default values.rw Enumeration .1.3.6.1.4.1.52.1.2.1.8.15 |
alarm OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9 |
devAlrm OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1 |
devTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1.1 |
devTrafficEnableEnable or disable the checking for device level traffic thresholds
getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.1.1.1 |
devTrafficThresholdThe number of packets detected by the device within the device
timebase that will cause a device traffic alarm trap to be sent.
The minimum is 0. There isn't a maximum.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.1.1.2 |
devColls OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1.2 |
devCollsEnableEnable or disable the checking for device level collision thresholds
getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.1.2.1 |
devCollsThresholdThe number of collisions per good packet detected by the device
within the device timebase that will cause a device collision alarm
trap to be sent. The minimum is 1, the maximum is 15.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.1.2.2 |
devError OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1.3 |
devErrorEnableEnable or disable the checking for device level error thresholds
getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.1.3.1 |
devErrorThresholdThe percentage of errors per good packet detected by the device
within the device timebase that will cause a device error alarm
trap to be sent. The minimum is 1, the maximum is 100.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.1.3.2 |
devErrorSourceThe type of errors used for the device error alarm.
The INTEGER is a bit encoded version of which errors to
include in the error sum. The bits are encoded as follows:
CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_errs - Bit 3
No_resource - Bit 4
Giants - Bit 5rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.1.3.3 |
devBroad OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1.4 |
devBroadEnableEnable the sending of device level broadcast traps.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.1.4.1 |
devBroadThresholdThe threshold of broadcast packets within the Devicetimebase
that will cause a broadcast alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.1.4.2 |
bdAlrm OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2 |
bdTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2.1 |
bdTrafficEnableEnable or disable the checking for board level traffic thresholds
getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.1.1 |
bdTrafficThresholdThe number of packets detected by the specified board within the device
timebase that will cause a board traffic alarm trap to be sent.
The minimum is 0. There isn't a maximum.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.2.1.2 |
bdTrafficBdDisablePermits a board to be disabled on a traffic threshold getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.1.3 |
bdColls OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2.2 |
bdCollsEnableEnable or disable the checking for board level collision thresholds
getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.2.1 |
bdCollsThresholdThe number of collisions per good packet detected by the specified
board within the device timebase that will cause a board collision
alarm trap to be sent. The minimum is 1, the maximum is 15.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.2.2.2 |
bdCollsBdDisablePermits a board to be disabled on a collision threshold
getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.2.3 |
bdError OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2.3 |
bdErrorEnableEnable or disable the checking for board level error thresholds
getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.3.1 |
bdErrorThresholdThe percentage of errors per good packet detected by the specified
board within the device timebase that will cause a board error
alarm trap to be sent. The minimum is 1, the maximum is 100.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.2.3.2 |
bdErrorSourceThe type of errors used for the board error alarm.
The INTEGER is a bit encoded version of which errors to
include in the error sum. The bits are encoded as follows:
CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_errs - Bit 3
No_resource - Bit 4
Giants - Bit 5rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.2.3.3 |
bdErrorBdDisablePermits a board to be disabled on an error threshold
getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.3.4 |
bdBroad OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2.4 |
bdBroadEnableEnable the sending of board level broadcast traps for this board.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.4.1 |
bdBroadThresholdThe threshold of broadcast packets within the Devicetimebase
that will cause a broadcast alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.2.4.2 |
bdBroadDisablePermit a board to be disabled on a broadcast threshold alarm.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.4.3 |
portAlrm OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3 |
portTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3.1 |
portTrafficEnableEnable or disable the checking for port level traffic thresholds
getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.1.1 |
portTrafficThresholdThe number of packets detected by the specified port within the device
timebase that will cause a port traffic alarm trap to be sent.
The minimum is 0. There isn't a maximum.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.3.1.2 |
portTrafficPortDisablePermits a port to be disabled on a traffic threshold getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.1.3 |
portColls OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3.2 |
portCollsEnableEnable or disable the checking for port level collision thresholds
getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.2.1 |
portCollsThresholdThe number of collisions per good packet detected by the specified
port within the device timebase that will cause a port collision
alarm trap to be sent. The minimum is 1, the maximum is 15.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.3.2.2 |
portCollsPortDisablePermits a port to be disabled on a collision threshold
getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.2.3 |
portError OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3.3 |
portErrorEnableEnable or disable the checking for port level error thresholds
getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.3.1 |
portErrorThresholdThe percentage of errors per good packet detected by the specified
port within the device timebase that will cause a port error
alarm trap to be sent. The minimum is 1, the maximum is 100.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.3.3.2 |
portErrorSourceThe type of errors used for the port error alarm.
The INTEGER is a bit encoded version of which errors to
include in the error sum. The bits are encoded as follows:
CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_errs - Bit 3
No_resource - Bit 4
Giants - Bit 5rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.3.3.3 |
portErrorPortDisablePermits a port to be disabled on an error threshold
getting exceeded.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.3.4 |
portBroad OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3.4 |
portBroadEnableEnable the sending of port level broadcast alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.4.1 |
portBroadThresholdThe threshold of broadcast packets within the Devicetimebase that
will cause a broadcast alarm.rw Counter .1.3.6.1.4.1.52.1.2.1.9.3.4.2 |
portBroadDisablePermit a port to be disabled on a broadcast threshold alarm.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.4.3 |
rr2device OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.1 |
commonD OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.1.1 |
ethernetD OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.1.2 |
tokenRingD OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.1.3 |
deviceTRTokenRingPortsOnThe number of Token Ring Ports (i.e. station, Ring In and
Ring Out ports) administratively ON for this device.rodeprecated INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.1 |
deviceTRTotalTokenRingPortsThe total number of Token Ring Ports (i.e. station, Ring In and
Ring Out ports) on this device.rodeprecated INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.2 |
deviceTRTotalTokenRingRingPortsOnThe total number of Ring In and Ring Out ports (active)
administratively ON for this device.rodeprecated INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.3 |
deviceTRTotalTokenRingRingPortsThe total number of Ring In and Ring Out ports on this device.rodeprecated INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.4 |
deviceTRTotalTokenRingRingsThe total number of (Token Ring) rings formed on this device.rodeprecated INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.5 |
deviceTRTotalTokenRingBoardsThe total number of Token Ring MIMs in the MMAC.rodeprecated INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.6 |
deviceTRTokenRingBoardMapThe slots that contain Token Ring MIM boards.
This field is bit encoded (e.g. If a bit is set then that board
is present and is a Token Ring MIM.) For example, a value of 2 indicates
that there is a board in the first slot and it is a Token Ring board.rodeprecated INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.7 |
network OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.2 |
rr2board OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3 |
commonB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3.1 |
boardIndexThe slot number of this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.1 |
boardNameThe name of the board. This field will only contain printable
ASCII characters.rw OCTET STRING .1.3.6.1.4.1.52.1.2.2.3.1.2 |
boardTypeThe type of the MIM. (eg. FOT, TPT, etc). See appendix A for
encoding.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.3 |
boardTotalPortsTotal number of ports supported on this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.4 |
boardPortsOnA read will return the number of adminstratively ON ports for the board.
A write of a 2 will administratively enable all the ports
on the board, except for redundant ports.rw INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.6 |
boardActiveUsersThe number of active users seen on this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.8 |
ethernetB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3.2 |
boardTotalPktsThe number of packets detected on all ports of this port.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.1 |
boardTotalErrorsThe sum of all alignment, CRC, out-of-window collisions, runt,
and giant errors detected by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.2 |
boardTransCollsThe number of transmit collisions detected by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.3 |
boardRecCollsThe number of receive collsions detected by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.4 |
boardAlignsThe number of packets with alignment errors detected by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.5 |
boardCRCsThe number of packets with bad CRC detected by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.6 |
boardRuntsThe number of runt frames detected by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.7 |
boardOOWCollsThe number of out-of-window collisions detected by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.8 |
boardNoResourcesThe number of no resource condtions detected by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.9 |
boardRecBytesThe number of bytes detected on the network by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.10 |
boardGiantsThe number of longer than 1518 byte packets detected by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.11 |
boardBroadPktsThe number broadcast packets detected by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.26 |
boardMultPktsThe number multicast packets detected by this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.27 |
tokenRingB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3.3 |
boardTotalRingPortsThe total number of ring ports on this board. Currently,
zero or two.rodeprecated INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.1 |
boardTotalStationPortsThe total number of station ports on this board.rodeprecated INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.2 |
boardModeStatusThe board mode.rwdeprecated Enumeration .1.3.6.1.4.1.52.1.2.2.3.3.3 |
boardTotalRingPortsOnThe number of administartively ON ring ports on this board.rodeprecated INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.4 |
boardTotalStationPortsOnThe number of administartively ON station ports on this board.rodeprecated INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.5 |
boardSpeedThe board speed.rwdeprecated Enumeration .1.3.6.1.4.1.52.1.2.2.3.3.6 |
boardRingSpeedFaultData speed of station mismatches configuration speed of board.
Board is automatically bypassed.rodeprecated Enumeration .1.3.6.1.4.1.52.1.2.2.3.3.7 |
boardFirstRingPortThe port number of the first ring port.rodeprecated INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.9 |
fddiB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3.4 |
rr2port OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4 |
commonP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.1 |
portIndexThe number of this port relative to the board it is on.ro INTEGER .1.3.6.1.4.1.52.1.2.2.4.1.1 |
portMediaTypeThe type of the port. (eg. FOT, TPT, etc). See appendix
A for values.ro INTEGER .1.3.6.1.4.1.52.1.2.2.4.1.2 |
portAdminStateThe administrative status of this port.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.1.3 |
portSourceAddrA source address that has been seen on this port.ro OCTET STRING .1.3.6.1.4.1.52.1.2.2.4.1.4 |
portActiveUsersThe number of active users seen on this port.ro INTEGER .1.3.6.1.4.1.52.1.2.2.4.1.6 |
ethernetP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.2 |
portTopologyTypeThe topological type of the port. Station referring to a port that
has seen 1 or 0 addresses. Trunk referring to a port that has seen
more than 1 address.ro Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.1 |
portLinkStatusThe state of the link signal for this portro Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.2 |
portStatusThe hardware status of the port.ro Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.3 |
portTotalPktsThe number of packets detected by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.4 |
portTotalErrorsThe sum of all alignment, CRC, out-of-window collisions, runt,
and giant errors detected by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.5 |
portTransmitCollsThe number of transmit collisions detected by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.6 |
portRecCollsThe number of receive collsions detected by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.7 |
portAlignsThe number of packets with alignment errors detected by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.8 |
portCRCsThe number of packets with bad CRC detected by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.9 |
portRuntsThe number of runt frames detected by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.10 |
portOOWCollsThe number of out-of-window collisions detected by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.11 |
portNoResourcesThe number of no resource condtions detected by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.12 |
portRecBytesThe number of bytes detected on the network by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.13 |
portGiantFramesThe number of longer than 1518 byte packets detected by this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.14 |
portRedundCrtThe redundant circuit with which this port is associated.rw INTEGER .1.3.6.1.4.1.52.1.2.2.4.2.15 |
portRedundTypeThe type of port this port is in the redundant circuit.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.16 |
portRedundStatusThe current state of this port in the redundant circuit.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.17 |
portForceTrunkTypeThis variable forces a port to be a trunk port.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.18 |
portBroadPktsThe sum of broadcast packets detected on this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.33 |
portMultPktsThe sum of multicast packets detected on this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.34 |
tokenRingP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.3 |
stationP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.3.1 |
stationPortLinkStatusWhen station is supplying phantom current the Link Signal is
active. When there is no phantom current the Link Signal is inactive.rodeprecated Enumeration .1.3.6.1.4.1.52.1.2.2.4.3.1.1 |
stationPortLinkStateTimeThe amount of time (in seconds) elapsed since the station port
last changed state. A write of 0 will reset the elapsed time.rwdeprecated INTEGER .1.3.6.1.4.1.52.1.2.2.4.3.1.2 |
ringP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.3.2 |
fddiP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.4 |
repeaterTables OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.5 |
fnb OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.1.1 |
fnbConnectedLeftThe Connected Left board (board n + 1) has the following states:
Detached == 1 (Management (only management) detached, read/write).
Attached == 2 (Management/AutoMode attached, read/write).
Faulted == 3 (Management/AutoMode tried to attach but failed
read ONLY).rw INTEGER .1.3.6.1.4.1.52.1.6.1.1.1 |
fnbConnectedRightThe Connected Right board (board n - 1) has the following states:
Detached == 1 (Management (only management) detached, read/write).
Attached == 2 (Management/AutoMode attached, read/write).
Faulted == 3 (Management/AutoMode tried to attach but failed
read ONLY).rw INTEGER .1.3.6.1.4.1.52.1.6.1.1.2 |
fnbBoardBypassStateOff == 1 (NOT bypassed).
On == 2 (bypassed).rw INTEGER .1.3.6.1.4.1.52.1.6.1.1.3 |
audibleAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.1.2 |
audibleAlarmEnableAllows/disallows the audible alarm to be sounded when a situation occurs
that the alarm should be sounded.rw Enumeration .1.3.6.1.4.1.52.1.6.1.2.1 |
audibleAlarmOffTurn off a sounding alarm.
A read will tell you if the alarm is on or not.
A write will stop a sounding alarm.rw Enumeration .1.3.6.1.4.1.52.1.6.1.2.2 |
productRev1 OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.3.5.1.3.1 |
target OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.3.5.1.3.1.1 |
targetRevisionThe revision of the target board.ro INTEGER .1.3.6.1.4.1.412.2.3.5.1.3.1.1.1 |
targetPortAssociationControls how the front panel ports are associated with the
bridge or the repeater. The valid values are:
Value AUI Port Fiber Port
0 Bridge Redundant
1 Redundant Bridge
2 Bridge Repeater
3 Repeater Bridge
4 Redundant Repeater
5 Repeater Redundant
Note: only values 0 and 1 are valid for rev 2 boards and before.
Note: only values 4 and 5 are valid for the IRM2.rw INTEGER .1.3.6.1.4.1.412.2.3.5.1.3.1.1.2 |
soidIRMSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.3375.2.1.3.2.1 |
soidIRBM OBJECT IDENTIFIER .1.3.6.1.4.1.3375.2.1.3.2.2 |
soidIRM2 OBJECT IDENTIFIER .1.3.6.1.4.1.3375.2.1.3.2.3 |