RADWIN-MIB-WINLINK1000
AI MIB Summary
Standard SNMP MIB module defining data structures for RADWIN-MIB-WINLINK1000.
402
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
402 total| Object Name |
|---|
radwin OBJECT IDENTIFIER .1.3.6.1.4.1.4458 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4458 |
radwinProducts OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20 |
winlink1000OduAirAntennaGainCurrent Antenna Gain in 0.1 dBi resolution. User defined value for
external antenna.
Legal range: MinAntennaGain - Alarm.rw INTEGER .1.3.6.1.4.1.4458.20 |
winlink1000Family OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.2 |
odu OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.2.1 |
oduIntegratedAntenna OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.2.1.1 |
oduExternalAntenna OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.2.1.2 |
radwin2000Family OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.3 |
odu2000 OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.3.1 |
odu2KIntegratedAntenna OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.3.1.1 |
odu2KExternalAntenna OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.3.1.2 |
gpsSynchronizerFamily OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.4 |
oduGSU OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.4.1 |
oduGSUExternalAntenna OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.4.1.2 |
hssSyncUnits OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.4.2 |
hssISU OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.4.2.1 |
hssGSU OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.4.2.2 |
radwin5000HBSFamily OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.5 |
oduHBS OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.5.1 |
oduHBSIntegratedAntenna OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.5.1.1 |
oduHBSExternalAntenna OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.5.1.2 |
radwin5000HSUFamily OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.6 |
oduHSU OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.6.1 |
oduHSUIntegratedAntenna OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.6.1.1 |
oduHSUExternalAntenna OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.6.1.2 |
radwin6000Family OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.10 |
odu6000 OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.10.1 |
odu6K OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.10.1.1 |
gateway6000 OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.10.2 |
gateway6K OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.10.2.1 |
radwinWiFiAPFamily OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.20 |
odu600 OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.20.1 |
oduWiFiAP OBJECT IDENTIFIER .1.3.6.1.4.1.4458.20.20.1.1 |
winlink1000 OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000 |
externalAlarmInPort2AlarmThe trap is sent every time an alarm occurs in the External Alarm Input of port #2.
Contains a single parameter, which is its description:
1 - Description: External Alarm 2 - - Alarm. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.106 |
bitFailedAlarmThe trap is sent if there is no way to recover from the situation.
Contains two parameters:
1 - Description: ODU power up built in test failed. Error code is: %n
2 - %n number TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.107 |
wrongConfigurationLoadedAlarmThe trap is sent if there is a way to recover from the situation.
Contains two parameters:
1 - Description: Wrong configuration loaded. Error code is: %n
2 - %n number TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.108 |
lanPort1DisconnectedAlarmIndicates the LAN port 1 status changed to disconnected.
Contains a single parameter, which is its description:
1 - Description: LAN port 1 status changed to disconnected. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.109 |
lanPort2DisconnectedAlarmIndicates the LAN port 2 status changed to disconnected.
Contains a single parameter, which is its description:
1 - Description: LAN port 2 status changed to disconnected. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.110 |
mngPortDisconnectedAlarmIndicates the LAN1 port status changed to disconnected.
Contains a single parameter, which is its description:
1 - Description: LAN1 port status changed to disconnected. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.111 |
externalAlarmInPort3AlarmThe trap is sent every time an alarm occurs in the External Alarm Input of port #3.
Contains a single parameter, which is its description:
1 - Description: External Alarm 3 - - Alarm. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.112 |
externalAlarmInPort4AlarmThe trap is sent every time an alarm occurs in the External Alarm Input of port #4.
Contains a single parameter, which is its description:
1 - Description: External Alarm 4 - - Alarm. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.113 |
swVersionsMismatchFullCompatibilityAlarmThe trap is sent if SW versions mismatch with full link functionality.
Contains a single parameter, which is its description:
1 - Description: Software versions mismatch - full link functionality TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.114 |
swVersionsMismatchRestrictedCompatibilityAlarmThe trap is sent if SW versions mismatch with restricted link functionality.
Contains a single parameter, which is its description:
1 - Description: Software versions mismatch - restricted link functionality TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.115 |
swVersionsMismatchSoftwareUpgradeRequiredThe trap is sent if SW versions mismatch and SW upgrade is required.
Contains a single parameter, which is its description:
1 - Description: Software versions mismatch - Software upgrade required TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.116 |
swVersionsIncompatibleThe trap is sent if SW versions are incompatible.
Contains a single parameter, which is its description:
1 - Description: SW Versions incompatible TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.117 |
hssMultipleSourcesDetectedAlarmIndicates that multiple sync pulse sources were detected.
Contains a single parameter, which is its description:
1 - Description: HSS multiple sync sources were detected. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.118 |
hssSyncToProperSourceStoppedAlarmIndicates that synchronization to a proper sync pulse source was stopped.
Contains a single parameter, which is its description:
1 - Description: HSS sync pulse - Down. The reason is: %s.
%s - Is the reason for the sync down. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.119 |
hssSyncPulseDetectedAlarmIndicates that HSS additional sync pulse was detected.
Contains a single parameter, which is its description:
1 - Description: HSS additional sync pulse was detected. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.120 |
tdmBackupAlarmIndicates that the TDM backup link was activated.
Contains a single parameter, which is its description:
1 - Description: TDM backup alarm - backup link was activated. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.121 |
linkLockUnauthorizedRemoteODUIndicates that the remote ODU is unauthorized.
Contains a single parameter, which is its description:
1 - Description: Unauthorized remote ODU connection rejected. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.122 |
linkLockUnauthorizedODUIndicates that the ODU is unauthorized.
Contains a single parameter, which is its description:
1 - Description: Unauthorized ODU connection rejected. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.123 |
hotStandbyAlarmIndicates that the hot standby secondary link was activated.
Contains a single parameter, which is its description:
1 - Description: Secondary Link Is Active. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.124 |
sfpInsertionIndicates that a device was inserted to SFP Port TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.126 |
sfpPort1DisconnectedAlarmIndicates the SFP port 1 status changed to disconnected.
Contains a single parameter which is its description:
1 - Description: SFP port 1 status changed to disconnected. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.127 |
ringRplStateActiveAlarmRPL state changed to Active. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.128 |
desiredRatioCanNotBeAppliedAlarmIndicates Desired UL/DL RAtio Can Not Be Applied. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.129 |
cbwMismatchIndicates that a Channel Bandwidth mismatch was detected.
Contains two parameters:
1 - Description: Channel Bandwidth Mismatch: one side is %n0 MHz and the other is %n1 MHz.
%n0 is the local Channel Bandwidth value in MHz.
%n1 is the remoet Channel Bandwidth value in MHz. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.130 |
gpsNotSynchronizedIndicates that the GPS is not synchronized with satellites.
Pulses are self generated. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.131 |
pdTooHighDueCbwLimitationsIndicates that link cannot be established because
link range is too large for channel bandwidth. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.132 |
hbsEncryptionAlarmIndicates an encryption key mismatch.
Contains a single parameter, which is its description, including the HSU's name TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.133 |
hbsEhServiceClosedToHsuIndicates an encryption key mismatch.
Contains a single parameter, which is its description, including the HSU's name TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.134 |
hbsUnsynchronizedHsuAlarmIndicates a registered HSU lost synchronization. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.135 |
hbsInactiveHbsAlarmIndicates HBS is InActive. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.136 |
incompatibleHsuIndicates that the HSU is not compatible to HBS.
Contains a single parameter, which is its description:
1 - Description: Incompatible ODUs. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.137 |
hsuUnsupportedBeaconIndicates an unsupported beacon has arrived at HSU TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.138 |
lanPortDisconnectedAlarmIndicates the LAN port status changed to disconnected.
Contains a single parameter, which is its description:
1 - Description: LAN port status changed to disconnected. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.139 |
poePortDisconnectedAlarmIndicates the LAN2 port status changed to disconnected.
Contains a single parameter, which is its description:
1 - Description: LAN2 port status changed to disconnected. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.140 |
poePowerConsumptionAlarmIndicates the POE Power Consumption is above allowed maximum.
Contains a single parameter, which is its description:
1 - Description: POE consumption above allowed maximum. port closed. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.141 |
hobupFaultyStateAlarmThis Alarm will indicate that the Hot Backup module is in faulty state.
1 - Description: Hot Backup fault detected: %s unit.
%s - Primary Or Secondary Unit TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.149 |
gpsOverCurrentAlarmIndicates the GPS Antenna current consumption is above allowed maximum.
Contains a single parameter, which is its description:
1 - Description: GPS Antenna current consumption above allowed maximum. GPS closed. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.150 |
gpsCommunicationFailiureAlarmIndicates the GPS data isn't received.
Contains a single parameter, which is its description:
1 - Description: GPS Communication failiure. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.151 |
temperatureThresholdAlarmIndicates the board temperature is above allowed maximum.
Contains a single parameter, which is its description:
1 - Description: GPS Antenna current consumption above allowed maximum. GPS closed. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.152 |
localRouterDiscoveryStatusThis Alarm will indicate that we have no connection with local train router.
1 - Description: MacLearningUpdate detected disconnection with local train router %s
%s - local train IP TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.153 |
trackRouterDiscoveryStatusThis Alarm will indicate that we have no connection with Track side router.
1 - Description: MacLearningUpdate detected disconnection with Track side router %s
%s - Default gateway IP TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.154 |
lastUserSnmpAccessOverHourAgoThis trap will indicate that the last access of the accessing user was more than an hour ago.
1 - Description: User %s performed SNMP access after more than an hour.
%s - user name TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.155 |
btsTargetUnreachableThis Alarm will indicate that we have no connection with Bts desired target.
1 - Description: TNC detected disconnection with the BTS target %s
%s - Default gateway IP TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.156 |
tdmServiceClearIndicates that TDM Service fault is cleared.
Contains a single parameter, which is its description:
1 - Description: TDM Service - Normal. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.200 |
ethServiceOpenedIndicates that Ethernet Service has been opened.
Contains a single parameter, which is its description:
1 - Description: Ethernet Service has been opened. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.201 |
encryptionClearIndicates that encryption is OK.
Contains a single parameter, which is its description:
1 - Description: Encryption Status - Normal. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.203 |
changeLinkPasswordClearIndicates that the Link Password was changed successfully.
Contains a single parameter, which is its description:
1 - Description: Link Password has been changed at/on: %s.
%s - Is the Local Site name or Remote Site name or both sides of the Link. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.204 |
externalAlarmInPort1ClearThis Trap is sent every time an External Alarm Input fault of port # 1 is cleared.
Contains a single parameter, which is its description:
1 - Description: External Alarm 1 - - Alarm Cleared. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.205 |
externalAlarmInPort2ClearThis Trap is sent every time an External Alarm Input fault of port # 2 is cleared.
Contains a single parameter, which is its description:
1 - Description: External Alarm 2 - - Alarm Cleared. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.206 |
lanPort1ClearIndicates the LAN port 1 status changed to connected.
Contains two parameters:
1 - Description: LAN port 1 status changed to connected - %s
2 - %s Is the Eth. mode (speed & duplex) TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.209 |
lanPort2ClearIndicates the LAN port 2 status changed to connected.
Contains two parameters:
1 - Description: LAN port 2 status changed to connected - %s.
2 - %s Is the Eth. mode (speed & duplex). TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.210 |
mngPortClearIndicates the LAN1 port status changed to connected.
Contains two parameters:
1 - Description: LAN1 port status changed to connected - %s
2 - %s Is the Eth. mode (speed & duplex) TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.211 |
externalAlarmInPort3ClearThis Trap is sent every time an External Alarm Input fault of port # 3 is cleared.
Contains a single parameter, which is its description:
1 - Description: External Alarm 3 - - Alarm Cleared. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.212 |
externalAlarmInPort4ClearThis Trap is sent every time an External Alarm Input fault of port # 4 is cleared.
Contains a single parameter, which is its description:
1 - Description: External Alarm 4 - - Alarm Cleared. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.213 |
swVersionsMatchFullCompatibilityClearThe trap is sent if SW versions match.
Contains a single parameter, which is its description:
1 - Description: Software Versions compatible TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.214 |
swVersionsMatchRestrictedCompatibilityClearThe trap is sent if SW versions match and link functionality is not restricted.
Contains a single parameter, which is its description:
1 - Description: Software Versions compatible TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.215 |
swVersionsMatchSoftwareUpgradeRequiredClearThe trap is sent if SW versions match and SW upgrade is successful.
Contains a single parameter, which is its description:
1 - Description: Software Versions compatible TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.216 |
swVersionsCompatibleClearThe trap is sent if SW versions compatible
Contains a single parameter, which is its description:
1 - Description: Software Versions compatible TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.217 |
hssMultipleSourcesDisappearedClearIndicates that multiple sync pulse sources disappeared.
Contains a single parameter, which is its description:
1 - Description: HSS multiple sync pulse sources disappeared. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.218 |
hssSyncToProperSourceAchievedClearIndicates that synchronization to a proper Sync source was achieved.
Contains a single parameter, which is its description:
1 - Description: HSS sync pulse - Up. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.219 |
hssSyncPulseDisappearedClearIndicates that HSS additional sync pulse disappeared.
Contains a single parameter, which is its description:
1 - Description: HSS additional sync pulse was disappeared. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.220 |
tdmBackupClearIndicates that the TDM main link was activated.
Contains a single parameter, which is its description:
1 - Description: TDM main link was activated. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.221 |
linkLockAuthorizedRemoteODUIndicates that the remote ODU is authorized.
Contains a single parameter, which is its description:
1 - Description: Authorized remote ODU connection accepted. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.222 |
linkLockAuthorizedODUIndicates that the ODU is authorized.
Contains a single parameter, which is its description:
1 - Description: Authorized ODU connection permitted. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.223 |
linkAuthenticationDisabledIndicates that the Link Lock is disabled.
Contains a single parameter, which is its description:
1 - Description: Link Authentication has been disabled. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.224 |
hotStandbyClearIndicates that the Primary Link Was Activated.
Contains a single parameter, which is its description:
1 - Description: Primary Link Is Active. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.225 |
sfpExtractionIndicates that a device was extracted from SFP Port TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.226 |
sfpPort1ClearIndicates the SFP port 1 status changed to connected.
Contains two parameters:
1 - Description: SFP port 1 status changed to connected - %s
2 - %s Is the Eth. mode (speed & duplex) TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.227 |
compatibleIdusIndicates that the ODU has identified compatible Idus on both sides of the link. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.228 |
desiredRatioCanNotBeAppliedClearIndicates Current UL/DL Ratio Is Equal To Desired Ratio. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.229 |
cbwMatchIndicates that a Channel Bandwidth match was detected.
Contains a single parameter, which is its description:
1 - Channel Bandwidth value in MHz. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.230 |
switchCbwAndChannelIndicates that the system is switching Channel Bandwidth and channel frequency.
Contains two parameters:
1 - Switching to Channel Bandwith %n0 MHz and to channel %n1 GHz. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.231 |
ringRplStateIdleRPL state changed to Idle. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.232 |
ringEthServiceStatusIndicates Ethernet service's state - blocked \ unblocked.
Contains a single parameter:
1 - Description: Ethernet's state (blocked \ unblocked) TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.233 |
ringFirstRpmReceivedRing application: in non-RPL link indicates first from a specific RPL was received.
Contains a single parameter:
1 - Description: RPM's VLAN ID TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.234 |
ringEthernetSrviceUnblockedTORing application: in non-RPL link Ethernet service is unblocked due to RPM timeout. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.235 |
gpsSynchronizedIndicates that the GPS is synchronized with satellites. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.236 |
hbsEncryptionClearIndicates that encryption is OK.
Contains a single parameter, which is its description, including the HSU's name TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.237 |
hbsEhServiceOpenedToHsuIndicates that encryption is OK.
Contains a single parameter, which is its description, including the HSU's name TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.238 |
hbsSynchronizedHsuAlarmIndicates a registered HSU is synchronized. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.239 |
hbsActiveHbsIndicates when HBS has been activated. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.240 |
switchCBWSwitching Channel Bandwidth. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.241 |
changeRatioHBS Tx ratio has changed. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.242 |
lanPortClearIndicates the LAN port status changed to connected.
Contains two parameters:
1 - Description: LAN port status changed to connected - %s
2 - %s Is the Eth. mode (speed & duplex) TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.243 |
poePortClearIndicates the LAN2 port status changed to connected.
Contains two parameters:
1 - Description: LAN2 port status changed to connected - %s
2 - %s Is the Eth. mode (speed & duplex) TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.244 |
poePowerConsumptionClearIndicates the POE power consumption is valid.
Contains two parameters:
1 - Description: POE consumption within limits. port is opened.
2 - %s Is the Eth. mode (speed & duplex) TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.245 |
incompatibleHbsHsuIncompatible HBS/HSU software versions - no service. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.246 |
mobilityLinkOffMobility - Link cannot be established due to:
1 - The HBS does not support Mobility
2 - Lack of resources in the HBS for HSU level TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.247 |
enterLocalConnectionEntering Local Connection (Broadcast) Mode. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.248 |
hobupActiveStateFaultyClearthis clear alarm will indicate that the Hot Backup unit is in active state.
Contains a single parameter, which is its description:
1 - Description: Hot Backup %s unit activated.
%s - Primary Or Secondary Unit TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.249 |
hobupStandbyStateThis info fault will indicate that the Hot backup module has entered standby/peer_detection state
Contains a single parameter, which is its description:
1 - Description: Hot Backup in Standby state: %s unit.
%s - Primary Or Secondary Unit TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.250 |
gpsOverCurrentClearIndicates the GPS Antenna current consumption is valid. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.251 |
temperatureThresholdClearIndicates the board temperature is valid. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.252 |
localRouterDiscoverySucceedIndicated the we succeeded to discover train router in ip %s MAC address %s
%s Train IP
%s Train MAC Address TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.253 |
trackRouterDiscoverySucceedIndicated the we succeeded to discover track router in ip %s MAC address %s
%s Train IP
%s Train MAC Address TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.254 |
qosVersion2StrictMismatchCPE doesn't support strict QOS configuration. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.255 |
qosVersion2TtlMismatchCPE doesn't support TTL configuration. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.256 |
btsTargetIsReachableIndicated the we succeeded to establish connection with the Bts desired target (%s)
%s Target IP TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.257 |
tcNotSupportedByHSUCPE doesn't support TC functionality. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.258 |
syncEPortHOStateChangeEnter/leave HO state of SyncE port. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.259 |
syncEPortFailureStateChangeEnter/leave Failure state of SyncE port. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.260 |
btsCpeUpdateServiceFailedUpdate service Failed TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.261 |
btsCpeUpdateServiceSucceedUpdate service Succeed TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.262 |
radiusServerNoREsponseNo response from radius server TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.263 |
noRadiusServerRespondAlarm indicates that no Radius server is connected TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.264 |
radiusServerRespondedSuccessfullyindicates that Radius server responded seccessfully. TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.265 |
bsaAlignmentStartedIndicate the beginning of Alignment Process TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.266 |
bsaAlignmentFinishedIndicate the completion of Alignment Process TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.267 |
bsaAlignmentTriggeredIndicate the triggering of Alignment Process due to exceeding thresholds TRAP-TYPE .1.3.6.1.4.1.4458.1000.0.268 |
winlink1000Odu OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1 |
winlink1000OduAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1.1 |
winlink1000OduAdmProductTypeODU configuration description.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.1 |
winlink1000OduAdmHwRevODU Hardware Version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.2 |
winlink1000OduAdmSwRevODU Software Version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.3 |
winlink1000OduAdmLinkNameLink Name. A change is effective immediately.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.4 |
winlink1000OduAdmResetCmdReset Command.
A set command with a value of 3 will cause a device reset.
HBS only: A set command with a value of 4 will cause a device reset for the entire sector.
The read value is always 0.rw INTEGER .1.3.6.1.4.1.4458.1000.1.1.5 |
winlink1000OduAdmAddresODU IP address. A change is effective after reset.
The parameter is kept for backward compatibility.
Using the alternative parameter: winlink1000OduAdmIpParamsCnfg is recommended.rw IpAddress .1.3.6.1.4.1.4458.1000.1.1.6 |
winlink1000OduAdmMaskODU Subnet Mask. A change is effective after reset.
The parameter is kept for backward compatibility.
Using the alternative parameter: winlink1000OduAdmIpParamsCnfg is recommended.rw IpAddress .1.3.6.1.4.1.4458.1000.1.1.7 |
winlink1000OduAdmGatewayODU default gateway. A change is effective after reset.
The parameter is kept for backward compatibility.
Using the alternative parameter: winlink1000OduAdmIpParamsCnfg is recommended.rw IpAddress .1.3.6.1.4.1.4458.1000.1.1.8 |
winlink1000OduAdmBroadcastThis parameter is reserved for the Manager application provided with the product.rw INTEGER .1.3.6.1.4.1.4458.1000.1.1.10 |
winlink1000OduAdmHostsTableTrap destinations table. Each trap destination is defined by an IP address and a UDP port.
Up to 10 addresses can be configured. SEQUENCE OF Winlink1000OduAdmHostsEntry .1.3.6.1.4.1.4458.1000.1.1.12 |
winlink1000OduAdmHostsEntryTrap destinations table entry. Winlink1000OduAdmHostsEntry .1.3.6.1.4.1.4458.1000.1.1.12.1 |
winlink1000OduAdmHostsIndexTrap destinations table index.ro INTEGER .1.3.6.1.4.1.4458.1000.1.1.12.1.1 |
winlink1000OduAdmHostsIpTrap destination IP address. A change is effective immediately.rw IpAddress .1.3.6.1.4.1.4458.1000.1.1.12.1.2 |
winlink1000OduAdmHostsPortUDP port of the trap destination. A change is effective immediately.rw INTEGER .1.3.6.1.4.1.4458.1000.1.1.12.1.3 |
winlink1000OduAdmHostsSecurityModelSecurity model used for this trap generation.rw Enumeration .1.3.6.1.4.1.4458.1000.1.1.12.1.4 |
winlink1000OduAdmHostsUserNameUser name used to generate the snmpv3 trap.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.12.1.5 |
winlink1000OduAdmHostsPasswordPassword used to generate the snmpv3 trap.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.12.1.6 |
winlink1000OduAdmHostsIPv6Trap destination IPv6 address. A change is effective immediately.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.12.1.7 |
winlink1000OduBuzzerAdminStateThis parameter controls the activation of the buzzer while the unit is in install mode.
A change is effective immediately. The valid values are: disabled (0), enabledAuto (1), enabledConstantly(2), advancedAuto (3).rw INTEGER .1.3.6.1.4.1.4458.1000.1.1.13 |
winlink1000OduProductIdThis parameter is reserved for the Manager application provided with the product.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.14 |
winlink1000OduReadCommunityRead Community String. This parameter always returns ***** when retrieving its value.
It is used by the Manager application to change the Read Community String.
The SNMP agent accepts only encrypted values.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.15 |
winlink1000OduReadWriteCommunityRead/Write Community String. This parameter always returns ***** when retrieving its value.
It is used by the Manager application to change the Read/Write Community String.
The SNMP agent accepts only encrypted values.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.16 |
winlink1000OduTrapCommunityTrap Community String. This parameter is used by the Manager application to change the Trap Community String.
The SNMP agent accepts only encrypted values.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.17 |
winlink1000OduAdmSnmpAgentVersionMajor version of the SNMP agent.ro INTEGER .1.3.6.1.4.1.4458.1000.1.1.18 |
winlink1000OduAdmRemoteSiteNameRemote site name. Returns the same value as sysLocation parameter of the remote site.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.19 |
winlink1000OduAdmSnmpAgentMinorVersionMinor version of the SNMP agent.ro INTEGER .1.3.6.1.4.1.4458.1000.1.1.20 |
winlink1000OduAdmLinkPasswordLink Password. This parameter always returns ***** when retrieving its value.
It is used by the Manager application to change the Link Password.
The SNMP agent accepts only encrypted values.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.21 |
winlink1000OduAdmSiteLinkPasswordSite Link Password. This parameter always returns ***** when retrieving its value.
It is used by the Manager application to change the Link Password of the site.
The SNMP agent accepts only encrypted values.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.22 |
winlink1000OduAdmDefaultPasswordThis parameter indicates if the current Link Password is the default password.ro Enumeration .1.3.6.1.4.1.4458.1000.1.1.23 |
winlink1000OduAdmConnectionTypeThis parameter indicates if the Manager application is connected to the local ODU
or to the remote ODU over the air. A value of 'unknown' indicates community string mismatch.ro Enumeration .1.3.6.1.4.1.4458.1000.1.1.24 |
winlink1000OduAdmBackToFactorySettingsCmdBack to factory settings Command. A change is effective after reset.
The read value is always 0.rw Enumeration .1.3.6.1.4.1.4458.1000.1.1.25 |
winlink1000OduAdmIpParamsCnfgODU IP address Configuration. The format is: |||rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.26 |
winlink1000OduAdmVlanIDVLAN ID. Valid values are 1 to 4094.
Initial value is 0 meaning VLAN unaware.rw INTEGER .1.3.6.1.4.1.4458.1000.1.1.27 |
winlink1000OduAdmVlanPriorityVLAN Priority. 0 is lowest priority, 7 is highest priority.rw INTEGER .1.3.6.1.4.1.4458.1000.1.1.28 |
winlink1000OduAdmSNODU Serial Numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.29 |
winlink1000OduAdmProductNameThis is the product name as it exists at ECro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.30 |
winlink1000OduAdmActivationKeyActivates a general key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.31 |
winlink1000OduAdmRmtPermittedOduTypeMobile Application: permitted partner OduType.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.32 |
winlink1000OduAdmCpuIDCPU IDro INTEGER .1.3.6.1.4.1.4458.1000.1.1.33 |
winlink1000OduAdmOvrdCmdAbility to perform special command in the ODU.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.34 |
winlink1000OduAdmLinkModeUnit PMP operation mode.rw Enumeration .1.3.6.1.4.1.4458.1000.1.1.35 |
winlink1000OduAdmActualConnectModeUnit connected as part to ptp or ptmp.ro Enumeration .1.3.6.1.4.1.4458.1000.1.1.36 |
winlink1000OduAdmAES256SupportAES-256 security support indication.ro Enumeration .1.3.6.1.4.1.4458.1000.1.1.37 |
winlink1000OduAdmAES256StateEnable/Disable AES-256 security mode over the air link.rw Enumeration .1.3.6.1.4.1.4458.1000.1.1.38 |
winlink1000OduAdmAES256StatusAES256 operating statusro Enumeration .1.3.6.1.4.1.4458.1000.1.1.39 |
winlink1000OduAdmBatterySavingShutdownTimeBattery Saving Shutdown Time in minutes, 0 till battery run out, -1 if not supported.rw INTEGER .1.3.6.1.4.1.4458.1000.1.1.40 |
winlink1000OduAdmWiFiPowerModeWIFI unit power mode.rw Enumeration .1.3.6.1.4.1.4458.1000.1.1.41 |
winlink1000OduAdmShutdownTimerShutdown Timer in seconds.ro INTEGER .1.3.6.1.4.1.4458.1000.1.1.42 |
winlink1000OduAdmGPSStateGPS statero Enumeration .1.3.6.1.4.1.4458.1000.1.1.43 |
winlink1000OduAdmTemperatureCThe temperature (Celsius) inside the Board.ro INTEGER .1.3.6.1.4.1.4458.1000.1.1.44 |
winlink1000OduAdmIPStackModeThe IP stack mode.rw Enumeration .1.3.6.1.4.1.4458.1000.1.1.45 |
winlink1000OduAdmIPv6ParamsCnfgODU IPv6 address Configuration. The format is: |||rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.46 |
winlink1000OduAdmIPv6AddressODU IPv6 address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.47 |
winlink1000OduAdmIPv6PrefixODU IPv6 subnet mask.ro INTEGER .1.3.6.1.4.1.4458.1000.1.1.48 |
winlink1000OduAdmIPv6DefaultGateWayODU IPv6 default gateway.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.49 |
winlink1000OduAdmPowerConsumptionPower Consumption (mWatt)ro INTEGER .1.3.6.1.4.1.4458.1000.1.1.50 |
winlink1000OduAdmWifi OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1.1.51 |
winlink1000OduAdmWifiChannelWifi Channelrw INTEGER .1.3.6.1.4.1.4458.1000.1.1.51.1 |
winlink1000OduAdmWifiTxPowerWifi TX Powerrw INTEGER .1.3.6.1.4.1.4458.1000.1.1.51.2 |
winlink1000OduAdmWifiSSIDWifi SSIDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.51.3 |
winlink1000OduAdmWifiSecurityTypeWifi Security typero Enumeration .1.3.6.1.4.1.4458.1000.1.1.51.4 |
winlink1000OduAdmWifiPasswordWifi Passwordrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.51.5 |
winlink1000OduAdmWifiNetworkWifi Networkrw IpAddress .1.3.6.1.4.1.4458.1000.1.1.51.6 |
winlink1000OduAdmWifiRssiWifi RSSIro INTEGER .1.3.6.1.4.1.4458.1000.1.1.51.7 |
winlink1000OduAdmWifiStationMACWifi Station MACro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.51.8 |
winlink1000OduAdmWifiRestartA set command with a value of 1 will cause a Wifi restart.
The read value is always 0.rw INTEGER (1) .1.3.6.1.4.1.4458.1000.1.1.51.9 |
winlink1000OduAdmWifiApStatusWifi AP Statusro Enumeration .1.3.6.1.4.1.4458.1000.1.1.51.10 |
winlink1000OduAdmBsaOperationModeBSA Operation Modero Enumeration .1.3.6.1.4.1.4458.1000.1.1.52 |
winlink1000OduAdmMngConnectionManagement Connectionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.53 |
winlink1000OduAdm1588TCSupportIndicates that 1588TC license activatedro Enumeration .1.3.6.1.4.1.4458.1000.1.1.54 |
winlink1000OduAdmSyncESupportndicates that SyncE license activatedro Enumeration .1.3.6.1.4.1.4458.1000.1.1.55 |
winlink1000OduAdmRadioRevRadio Revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.56 |
winlink1000OduAdmProductRevProduct Revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.57 |
winlink1000OduAdmPMPSUSupportIndicates that PMP SU license is activatedro Enumeration .1.3.6.1.4.1.4458.1000.1.1.58 |
winlink1000OduAdmManagerDownloadURLThis is the URL from which management tool can be downloadedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.59 |
winlink1000OduAdmAntennaDescriptionThe is a description of the antenna connected to the ODUro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.60 |
winlink1000OduAdmSwCapabilitiesThis is used to describe which Software Capabilities the current ODU supportsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.1.61 |
winlink1000OduService OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1.2 |
winlink1000OduSrvModeSystem mode. The only values that can be set are installMode and slaveMode;
normalMode reserved to the Manager application provided with the product.
A change is effective after link re-synchronization.rw Enumeration .1.3.6.1.4.1.4458.1000.1.2.1 |
winlink1000OduSrvBridgingBridging Mode. Valid values are: disabled (0), enabled (1).ro INTEGER .1.3.6.1.4.1.4458.1000.1.2.3 |
winlink1000OduServiceRingTopology OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1.2.4 |
winlink1000OduSrvRingLinkModeMode of the link regarding ring topology.rw Enumeration .1.3.6.1.4.1.4458.1000.1.2.4.1 |
winlink1000OduSrvRingTopologySupportedRing Topology, options are: supported, not supportedro Enumeration .1.3.6.1.4.1.4458.1000.1.2.4.2 |
winlink1000OduSrvRingVlanIdTableRing VLAN IDs table. SEQUENCE OF Winlink1000OduSrvRingVlanIdEntry .1.3.6.1.4.1.4458.1000.1.2.4.3 |
winlink1000OduSrvRingVlanIdEntryVLAN ID of the internal ring messages. Valid values are 1 to 4094.
Initial value is 0 meaning VLAN unaware. Winlink1000OduSrvRingVlanIdEntry .1.3.6.1.4.1.4458.1000.1.2.4.3.1 |
winlink1000OduSrvRingVlanIdIndexIndex of VLAN ID of the internal ring messages.ro INTEGER .1.3.6.1.4.1.4458.1000.1.2.4.3.1.1 |
winlink1000OduSrvRingVlanIdVLAN ID of the internal ring messages. Valid values are 1 to 4094.
Initial value is 0 meaning VLAN unaware.rw INTEGER .1.3.6.1.4.1.4458.1000.1.2.4.3.1.2 |
winlink1000OduSrvRingEthStatusRepresents the Ethernet service blocking state of a Rings linkro Enumeration .1.3.6.1.4.1.4458.1000.1.2.4.4 |
winlink1000OduSrvRingMaxAllowedTimeFromLastRpmDefines the minimal time (in ms) required for determination of ring failure.rw INTEGER .1.3.6.1.4.1.4458.1000.1.2.4.5 |
winlink1000OduSrvRingWTRDefines the minimal time (in ms) required for ring recovery.rw INTEGER .1.3.6.1.4.1.4458.1000.1.2.4.6 |
winlink1000OduServiceQoS OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1.2.5 |
winlink1000OduSrvQoSModeMode of QoS feature.rw Enumeration .1.3.6.1.4.1.4458.1000.1.2.5.1 |
winlink1000OduSrvQoSConfTableQoS configuration table. SEQUENCE OF Winlink1000OduSrvQoSConfEntry .1.3.6.1.4.1.4458.1000.1.2.5.2 |
winlink1000OduSrvQoSConfEntryQoS configuration table. Winlink1000OduSrvQoSConfEntry .1.3.6.1.4.1.4458.1000.1.2.5.2.1 |
winlink1000OduSrvQoSConfIndexIndex of QoS Configuration.ro INTEGER .1.3.6.1.4.1.4458.1000.1.2.5.2.1.1 |
winlink1000OduSrvConfVlanQGroupsFrames classification according to VLAN Priority IDs.ro INTEGER .1.3.6.1.4.1.4458.1000.1.2.5.2.1.2 |
winlink1000OduSrvConfDiffservQGroupsFrames classification according to Diffserv.ro INTEGER .1.3.6.1.4.1.4458.1000.1.2.5.2.1.3 |
winlink1000OduSrvConfQueMirDesired Private MIR.rw INTEGER .1.3.6.1.4.1.4458.1000.1.2.5.2.1.4 |
winlink1000OduSrvConfQueWeightQoS queueu's weights in percent.rw INTEGER .1.3.6.1.4.1.4458.1000.1.2.5.2.1.5 |
winlink1000OduSrvQoSVlanQGroupsSetStrFrames classification according to VLAN IDs string for set.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.2.5.3 |
winlink1000OduSrvQoSDiffservQGroupsSetStrFrames classification according to Diffserv IDs string for set.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.2.5.4 |
winlink1000OduSrvQoSMaxRTQuePercentMaximal percent for RT & NRT queues.ro INTEGER .1.3.6.1.4.1.4458.1000.1.2.5.5 |
winlink1000OduServiceVlan OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1.2.6 |
winlink1000OduSrvVlanSupportODU Ethernet port VLAN support and configuration availability indication.
1 - ODU VLAN Functionality Not Supported
2 - ODU VLAN Functionality Supported
3 - ODU VLAN Functionality Supported and Availablero Enumeration .1.3.6.1.4.1.4458.1000.1.2.6.1 |
winlink1000OduSrvVlanIngressModeODU Ethernet port ingress VLAN mode.rw Enumeration .1.3.6.1.4.1.4458.1000.1.2.6.2 |
winlink1000OduSrvVlanEgressModeODU Ethernet port egress VLAN mode.rw Enumeration .1.3.6.1.4.1.4458.1000.1.2.6.3 |
winlink1000OduSrvEgressTagODU ethernet port egress VLAN tag.
Right most digit is Vlan priority (0-7),
other digits compose Vlan Id (2-4094)rw INTEGER .1.3.6.1.4.1.4458.1000.1.2.6.4 |
winlink1000OduSrvEgressProviderTagODU ethernet port egress Provider VLAN tag.
Right most digit is Vlan priority (0-7),
other digits compose Vlan Id (2-4094)rw INTEGER .1.3.6.1.4.1.4458.1000.1.2.6.5 |
winlink1000OduSrvVlanIngressAllowedVIDsODU ethernet port VLAN IDs that will not be filtered on ingress.
w|w|w|w|w|w|w|w| ( where w = {0-4094} and w != 1 )rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.2.6.6 |
winlink1000OduSrvVlanDisableDisable VLAN functionality. The following values can be set:
3 - Disable ODU & IDU VLAN Configurations.rw INTEGER .1.3.6.1.4.1.4458.1000.1.2.6.7 |
winlink1000OduServiceVlanProviderListTPIDstrHolds the possible Provider TPIDs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.2.6.8 |
winlink1000OduEthernet OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1.3 |
winlink1000OduEthernetRemainingRateCurrent Ethernet bandwidth in bps.ro INTEGER .1.3.6.1.4.1.4458.1000.1.3.1 |
winlink1000OduEthernetIfTableODU Ethernet Interface table. SEQUENCE OF Winlink1000OduEthernetIfEntry .1.3.6.1.4.1.4458.1000.1.3.2 |
winlink1000OduEthernetIfEntryODU Ethernet Interface table entry. Winlink1000OduEthernetIfEntry .1.3.6.1.4.1.4458.1000.1.3.2.1 |
winlink1000OduEthernetIfIndexODU Ethernet Interface Index.ro INTEGER .1.3.6.1.4.1.4458.1000.1.3.2.1.1 |
winlink1000OduEthernetIfAddressODU MAC address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.3.2.1.5 |
winlink1000OduEthernetIfAdminStatusRequired state of the interface.rw Enumeration .1.3.6.1.4.1.4458.1000.1.3.2.1.6 |
winlink1000OduEthernetIfOperStatusCurrent operational state of the interface.ro Enumeration .1.3.6.1.4.1.4458.1000.1.3.2.1.7 |
winlink1000OduEthernetIfFailActionFailure action of the interface.rw Enumeration .1.3.6.1.4.1.4458.1000.1.3.2.1.8 |
winlink1000OduEthernetIf1588v2PTPEventRXRateFor debug usero INTEGER .1.3.6.1.4.1.4458.1000.1.3.2.1.9 |
winlink1000OduEthernetIf1588v2PTPEventTXRateFor debug usero INTEGER .1.3.6.1.4.1.4458.1000.1.3.2.1.10 |
winlink1000OduEthernetNumOfPortsNumber of ODU network interfaces.ro INTEGER .1.3.6.1.4.1.4458.1000.1.3.3 |
winlink1000OduEthernetGbeSupportedSupported Giga bit Ethernet in ODU.ro Enumeration .1.3.6.1.4.1.4458.1000.1.3.4 |
winlink1000OduEthernetSfpPropertiesSfp port properties.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.3.5 |
winlink1000OduBridge OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1.4 |
winlink1000OduBridgeBase OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1.4.1 |
winlink1000OduBridgeBasePortTableODU Bridge Ports table. SEQUENCE OF Winlink1000OduBridgeBasePortEntry .1.3.6.1.4.1.4458.1000.1.4.1.4 |
winlink1000OduBridgeBasePortEntryODU Bridge Ports table entry. Winlink1000OduBridgeBasePortEntry .1.3.6.1.4.1.4458.1000.1.4.1.4.1 |
winlink1000OduBridgeBasePortIndexODU Bridge Port Number.ro INTEGER .1.3.6.1.4.1.4458.1000.1.4.1.4.1.1 |
winlink1000OduBridgeBaseIfIndexIfIndex corresponding to ODU Bridge port.ro INTEGER .1.3.6.1.4.1.4458.1000.1.4.1.4.1.2 |
winlink1000OduBridgeTp OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1.4.4 |
winlink1000OduBridgeTpPortTableODU Transparent Bridge Ports table. SEQUENCE OF Winlink1000OduBridgeTpPortEntry .1.3.6.1.4.1.4458.1000.1.4.4.3 |
winlink1000OduBridgeTpPortEntryODU Transparent Bridge Ports table entry. Winlink1000OduBridgeTpPortEntry .1.3.6.1.4.1.4458.1000.1.4.4.3.1 |
winlink1000OduBridgeTpPortIndexODU Transparent Bridge Port Number.ro INTEGER .1.3.6.1.4.1.4458.1000.1.4.4.3.1.1 |
winlink1000OduBridgeTpPortInFramesNumber of frames received by this port.ro Counter .1.3.6.1.4.1.4458.1000.1.4.4.3.1.3 |
winlink1000OduBridgeTpPortOutFramesNumber of frames transmitted by this port.ro Counter .1.3.6.1.4.1.4458.1000.1.4.4.3.1.4 |
winlink1000OduBridgeTpPortInBytesNumber of bytes received by this port.ro Counter .1.3.6.1.4.1.4458.1000.1.4.4.3.1.101 |
winlink1000OduBridgeTpPortOutBytesNumber of bytes transmitted by this port.ro Counter .1.3.6.1.4.1.4458.1000.1.4.4.3.1.102 |
winlink1000OduBridgeTpModeODU bridge mode.
A change is effective after reset. Valid values: hubMode (0), bridgeMode (1).rw INTEGER .1.3.6.1.4.1.4458.1000.1.4.4.101 |
winlink1000OduBridgeConfigModeODU bridge configuration modero Enumeration .1.3.6.1.4.1.4458.1000.1.4.4.102 |
winlink1000OduAir OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1.5 |
winlink1000OduAirFreqInstallation Center Frequency. Valid values are product dependent. A change is effective after link re-synchronization.rw INTEGER .1.3.6.1.4.1.4458.1000.1.5.1 |
winlink1000OduAirDesiredRateDeprecated parameter, actual behavior is read-only.
Required Air Rate. For Channel Bandwidth of 20, 10, 5 MHz divide the value by 1, 2, 4 respectively.rwdeprecated INTEGER .1.3.6.1.4.1.4458.1000.1.5.2 |
winlink1000OduAirSSIDReserved for the Manager application provided with the product.
The Sector ID in Point-To-Multi-Point systems.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.3 |
winlink1000OduAirTxPowerRequired Transmit power in dBm . This is a nominal value while the actual transmit power includes additional attenuation.
The min and max values are product specific. A change is effective immediately.rw INTEGER .1.3.6.1.4.1.4458.1000.1.5.4 |
winlink1000OduAirSesStateCurrent Link State. The value is active (3) during normal operation.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.5 |
winlink1000OduAirMstrSlvThis parameter indicates if the device was automatically selected into the radio link master or slave.
The value is undefined if there is no link.
The value is relevant only for point to point systems.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.6 |
winlink1000OduAirResyncSetting this parameter to 1 will cause the link to restart the synchronization process.rw INTEGER .1.3.6.1.4.1.4458.1000.1.5.8 |
winlink1000OduAirPerf OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1.5.9 |
winlink1000OduAirRxPowerReceived Signal Strength in dBm. Relevant only for point to point systems.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.9.1 |
winlink1000OduAirTotalFramesTotal number of radio frames.ro Counter .1.3.6.1.4.1.4458.1000.1.5.9.2 |
winlink1000OduAirBadFramesTotal number of received radio frames with CRC error. The value is relevant only for point to point systems .ro Counter .1.3.6.1.4.1.4458.1000.1.5.9.3 |
winlink1000OduAirCurrentRateDeprecated parameter. Actual rate of the air interface in Mbps.
For Channel Bandwidth of 20, 10, 5 MHz divide the value by 1, 2, 4 respectively.rodeprecated INTEGER .1.3.6.1.4.1.4458.1000.1.5.9.4 |
winlink1000OduAirCurrentRateIdxIndex of current air rate.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.9.5 |
winlink1000OduAirChainsRxPowerReceived Signal Strength of Cpe chains in dBm.
Chain 1 RSS: (1 Byte)
Chain 2 RSS: (1 Byte)
Chain 3 RSS: (1 Byte)ro OCTET STRING .1.3.6.1.4.1.4458.1000.1.5.9.6 |
winlink1000OduAirCurrentRateCBWCBW of current air rate.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.9.7 |
winlink1000OduAirCurrentRateGIGI of current air rate.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.9.8 |
winlink1000OduAirTxPower36Deprecated parameter. Actual behavior is read-only.rwdeprecated INTEGER .1.3.6.1.4.1.4458.1000.1.5.10 |
winlink1000OduAirTxPower48Deprecated parameter. Actual behavior is read-only.rwdeprecated INTEGER .1.3.6.1.4.1.4458.1000.1.5.11 |
winlink1000OduAirCurrentTxPowerCurrent Transmit Power in dBm. This is a nominal value while the actual transmit power includes additional attenuation.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.12 |
winlink1000OduAirMinFrequencyMinimum center frequency in MHz.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.13 |
winlink1000OduAirMaxFrequencyMaximum center frequency in MHz.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.14 |
winlink1000OduAirFreqResolutionCenter Frequency resolution.
Measured in MHz if value < 100, otherwise in KHz.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.15 |
winlink1000OduAirCurrentFreqCurrent Center Frequency.
Measured in MHz if center frequency resolution value < 100, otherwise in KHz.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.16 |
winlink1000OduAirNumberOfChannelsNumber of channels that can be used.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.17 |
winlink1000OduAirChannelsTableTable of channels used by automatic channels selection (ACS). SEQUENCE OF Winlink1000OduAirChannelsEntry .1.3.6.1.4.1.4458.1000.1.5.18 |
winlink1000OduAirChannelsEntryACS channels table entry. Winlink1000OduAirChannelsEntry .1.3.6.1.4.1.4458.1000.1.5.18.1 |
winlink1000OduAirChannelsIndexChannel Index.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.18.1.1 |
winlink1000OduAirChannelsFrequencyChannel frequency in MHz.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.18.1.2 |
winlink1000OduAirChannelsOperStateChannel state. Can be set by the user.
Automatic Channel Selection uses channels that are AirChannelsOperState enabled and AirChannelsAvail enabled.
A change is effective after link re-synchronization. Valid values: disabled (0), enabled (1).
Rewriteable only in Point-To-Point products.rw INTEGER .1.3.6.1.4.1.4458.1000.1.5.18.1.3 |
winlink1000OduAirChannelsAvailChannel state. Product specific and cannot be changed by the user.
Automatic Channel Selection uses channels that are AirChannelsOperState enabled and AirChannelsAvail enabled.
Valid values: disabled (0), enabled (1).ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.18.1.4 |
winlink1000OduAirChannelsDefaultFreqDefault channel's availability for all CBWs.
The valid values are: forbidden (0), available (1).ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.18.1.5 |
winlink1000OduAirDfsStateRadar detection state. Valid values: disabled (0), enabled (1).ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.19 |
winlink1000OduAirAutoChannelSelectionStateDeprecated parameter. Indicating Automatic Channel Selection availability at current channel bandwidth.
Valid values: disabled (0), enabled (1).rodeprecated INTEGER .1.3.6.1.4.1.4458.1000.1.5.20 |
winlink1000OduAirEnableTxPowerIndicating Transmit power configuration enabled or disabled.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.21 |
winlink1000OduAirMinTxPowerMinimum Transmit power in dBm.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.22 |
winlink1000OduAirMaxTxPowerTableTable of Maximum transmit power per air rate, in dBm. SEQUENCE OF Winlink1000OduAirMaxTxPowerEntry .1.3.6.1.4.1.4458.1000.1.5.23 |
winlink1000OduAirMaxTxPowerEntryMaximum Transmit power table entry. Winlink1000OduAirMaxTxPowerEntry .1.3.6.1.4.1.4458.1000.1.5.23.1 |
winlink1000OduAirMaxTxPowerIndexAir interface rate index.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.23.1.1 |
winlink1000OduAirMaxTxPowerMaximum Transmit power in dBm.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.23.1.2 |
winlink1000OduAirChannelBandwidthChannel bandwidth in KHz. A change is effective after reset.rw INTEGER .1.3.6.1.4.1.4458.1000.1.5.24 |
winlink1000OduAirChannelBWTableChannel Bandwidths table. SEQUENCE OF Winlink1000OduAirChannelBWEntry .1.3.6.1.4.1.4458.1000.1.5.25 |
winlink1000OduAirChannelBWEntryChannel Bandwidth table entry. Winlink1000OduAirChannelBWEntry .1.3.6.1.4.1.4458.1000.1.5.25.1 |
winlink1000OduAirChannelBWIndexChannel Bandwidth index.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.25.1.1 |
winlink1000OduAirChannelBWAvailChannel Bandwidth availability, product specific.
Options are: Not supported, supported with manual channel selection, supported with Automatic Channel Selection.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.25.1.2 |
winlink1000OduAirChannelsAdminStateChannels' availability per CBW.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.25.1.3 |
winlink1000OduAirChannelBWHSSATDDConflictPerCBWIndication for possible Link drop per CBW due to conflict between HSS and ATDD.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.25.1.4 |
winlink1000OduAirChannelBWMinRatioForSupportingMinimal TX ratio that may be used by the HSM and still enable proper operation of the aforementioned CBW.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.25.1.5 |
winlink1000OduAirChannelBWMaxRatioForSupportingMaximal TX ratio that may be used by the HSM and still enable proper operation of the aforementioned CBW.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.25.1.6 |
winlink1000OduAirRFDCurrent radio frame duration in microseconds.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.26 |
winlink1000OduAirRatesTableAir Rate indexes table for current channel bandwidth. SEQUENCE OF Winlink1000OduAirRatesEntry .1.3.6.1.4.1.4458.1000.1.5.27 |
winlink1000OduAirRatesEntryAir Rate indexes table entry. Winlink1000OduAirRatesEntry .1.3.6.1.4.1.4458.1000.1.5.27.1 |
winlink1000OduAirRatesIndexAir Rate index.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.27.1.1 |
winlink1000OduAirRatesAvailAir Rate availability, depending on air interface conditions.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.27.1.2 |
winlink1000OduAirDesiredRateIdxRequired Air Rate index. 0 reserved for Adaptive Rate.
A change is effective immediately after Set operation to the master side
while the link is up.rw INTEGER .1.3.6.1.4.1.4458.1000.1.5.28 |
winlink1000OduAirLinkDistanceLink distance in meters.
A value of -1 indicates an illegal value and is also used when a link is not established.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.29 |
winlink1000OduAirLinkWorkingModeLink working mode as a result of comparing versions of both sides of the link.
Possible modes are: Unknown - no link, Normal - versions on both sides are identical with full compatibility,
with restricted compatibility, or versions on both sides are different with software upgrade or versions incompatibility.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.30 |
winlink1000OduAirMajorLinkIfVersionMajor link interface versionro INTEGER .1.3.6.1.4.1.4458.1000.1.5.31 |
winlink1000OduAirMinorLinkIfVersionMinor link interface versionro INTEGER .1.3.6.1.4.1.4458.1000.1.5.32 |
winlink1000OduAirHss OBJECT IDENTIFIER .1.3.6.1.4.1.4458.1000.1.5.40 |
winlink1000OduAirHssDesiredOpStateRequired Hub Site Synchronization operating state.
For HssSyncUnits : For hssISU :[2,7] ,For hssGSU :[2,6]
For HBS: [2,3,4,5]rw Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.1 |
winlink1000OduAirHssCurrentOpStateCurrent Hub Site Synchronization operating state.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.2 |
winlink1000OduAirHssSyncStatusHub Site Synchronization sync status.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.3 |
winlink1000OduAirHssExtPulseStatusHub Site Synchronization external pulse detection status.
In GSS mode:
if generating then 1PSP is auto generated by the GSS Unit.
if generatingAndDetecting then 1PSP is generated by GPS satellites signal.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.4 |
winlink1000OduAirHssExtPulseTypeHub Site Synchronization external pulse type.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.5 |
winlink1000OduAirHssDesiredExtPulseTypeHub Site Synchronization required external pulse type. Valid values for read write:
{typeA(2),typeB(3),typeC(4),typeD(5),typeE(6),typeF(7)}. Valid value for read only:
{notApplicable(1)}.rw Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.6 |
winlink1000OduAirHssRfpTableODU Radio Frame Patterns (RFP) Table. SEQUENCE OF Winlink1000OduAirHssRfpEntry .1.3.6.1.4.1.4458.1000.1.5.40.7 |
winlink1000OduAirHssRfpEntryODU RFP Table entry. Winlink1000OduAirHssRfpEntry .1.3.6.1.4.1.4458.1000.1.5.40.7.1 |
winlink1000OduAirHssRfpIndexODU RFP Table index. The index represent the Radio Frame Pattern:
typeA(2), typeB(3), typeC(4), typeD(5),typeE(6),typeF(7).ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.40.7.1.1 |
winlink1000OduAirHssRfpEthChannelBW5MHzRepresents the compatibility of Ethernet service under Channel BW of 5MHz
in the specific Radio Frame Pattern.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.7.1.2 |
winlink1000OduAirHssRfpTdmChannelBW5MHzRepresents the compatibility of TDM service under Channel BW of 5MHz
in the specific Radio Frame Pattern.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.7.1.3 |
winlink1000OduAirHssRfpEthChannelBW10MHzRepresents the compatibility of Ethernet service under Channel BW of 10MHz
in the specific Radio Frame Pattern.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.7.1.4 |
winlink1000OduAirHssRfpTdmChannelBW10MHzRepresents the compatibility of TDM service under Channel BW of 10MHz
in the specific Radio Frame Pattern.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.7.1.5 |
winlink1000OduAirHssRfpEthChannelBW20MHzRepresents the compatibility of Ethernet service under Channel BW of 20MHz
in the specific Radio Frame Pattern.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.7.1.6 |
winlink1000OduAirHssRfpTdmChannelBW20MHzRepresents the compatibility of TDM service under Channel BW of 20MHz
in the specific Radio Frame Pattern.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.7.1.7 |
winlink1000OduAirHssRfpEthChannelBW40MHzRepresents the compatibility of Ethernet service under Channel BW of 40MHz
in the specific Radio Frame Pattern.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.7.1.8 |
winlink1000OduAirHssRfpTdmChannelBW40MHzRepresents the compatibility of TDM service under Channel BW of 40MHz
in the specific Radio Frame Pattern.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.7.1.9 |
winlink1000OduAirHssRfpEthChannelBW80MHzRepresents the compatibility of Ethernet service under Channel BW of 80MHz
in the specific Radio Frame Pattern.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.7.1.10 |
winlink1000OduAirHssRfpEthChannelBW7MHzRepresents the compatibility of Ethernet service under Channel BW of 7MHz
in the specific Radio Frame Pattern.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.7.1.11 |
winlink1000OduAirHssRfpEthChannelBW14MHzRepresents the compatibility of Ethernet service under Channel BW of 14MHz
in the specific Radio Frame Pattern.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.7.1.12 |
winlink1000OduAirHssRfpStrHub Site Synchronization supported patternsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.40.8 |
winlink1000OduAirHssHsmIDA unique ID which is common to the HSM and all its collocated ODUsro INTEGER .1.3.6.1.4.1.4458.1000.1.5.40.9 |
winlink1000OduAirHssTimeHub Site Synchronization GPS timero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.40.10 |
winlink1000OduAirHssLatitudeHub Site Synchronization GPS Latitudero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.40.11 |
winlink1000OduAirHssNSIndicatorHub Site Synchronization GPS N/S Indicatorro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.40.12 |
winlink1000OduAirHssLongitudeHub Site Synchronization GPS Longitudero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.40.13 |
winlink1000OduAirHssEWIndicatorHub Site Synchronization GPS E/W Indicatorro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.40.14 |
winlink1000OduAirHssNumSatellitesHub Site Synchronization GPS Number of satellitesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.40.15 |
winlink1000OduAirHssAltitudeHub Site Synchronization GPS Altitudero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.40.16 |
winlink1000OduAirHssRfpPhaseHub Site Synchronization GPS RFP phaserw Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.17 |
winlink1000OduAirHssInterSiteSynchronizationModeInter-Site Synchronization Mode - independent / synchronizedrw Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.18 |
winlink1000OduAirHssInterSiteSynchronizationAvailabilityInter-Site Synchronization Availabilityro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.19 |
winlink1000OduAirHssSatellitesSatSyncRequiredSatellites Synchronization Is Requiredrw Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.20 |
winlink1000OduAirHssDomainIDEHSS domain. Indentify set of CUs with same HSS synchronizationrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.40.21 |
winlink1000OduAirHssSupportedSynchronizationProtocolSupported Synchronization Protocolsro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.22 |
winlink1000OduAirHssDesiredSynchronizationProtocolDesired Synchronization Protocolsrw Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.23 |
winlink1000OduAirHssDiscoverInitiate Discovery process of ODUs on the network.rw Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.24 |
winlink1000OduAirHssNumberOfDiscoveredODUsNumber OF Discovered ODUs in network.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.40.25 |
winlink1000OduAirHssDiscoverTableHSS Discover Table. SEQUENCE OF Winlink1000OduAirHssDiscoverEntry .1.3.6.1.4.1.4458.1000.1.5.40.26 |
winlink1000OduAirHssDiscoverEntryODU Discover Table entry. Winlink1000OduAirHssDiscoverEntry .1.3.6.1.4.1.4458.1000.1.5.40.26.1 |
winlink1000OduAirHssDiscoverIndexHSS Discover Table Index.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.40.26.1.1 |
winlink1000OduAirHssDiscoverODUDescriptionHold ODU HSS status in compress format:
Domain,IP,HSS Role,Hss support,
Enabled HSS protocol,Sync Status,
Location, IPv6.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.40.26.1.2 |
winlink1000OduAirHssMasterSlaveCompatibilityEHSM version compatibility. Relevant to Ethernet HSS Clients only.ro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.27 |
winlink1000OduAirHssNumberOfAssociatedCUNumber of associated Ethernet HSS Clients. Relevant to Ethernet HSS Masters onlyro INTEGER .1.3.6.1.4.1.4458.1000.1.5.40.28 |
winlink1000OduAirHssAssociatedCUTableAssociated Ethernet HSS Clients Table. Releant for Ethernet HSS Masters only. SEQUENCE OF Winlink1000OduAirHssAssociatedCUTableEntry .1.3.6.1.4.1.4458.1000.1.5.40.29 |
winlink1000OduAirHssAssociatedCUTableEntryAssociated Ethernet HSS Clients Table Entry. Releant for Ethernet HSS Masters only. Winlink1000OduAirHssAssociatedCUTableEntry .1.3.6.1.4.1.4458.1000.1.5.40.29.1 |
winlink1000OduAirHssAssociatedCUIndexAssociated Ethernet HSS Clients Table Index. Releant for Ethernet HSS Masters only.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.40.29.1.1 |
winlink1000OduAirHssAssociatedCUDescriptionHolds Associated Ethernet HSS Clients Description in compress format:
IP,Delay,Compatibility,Ethernet Speed, Ethernet Rx rate, IPv6ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.40.29.1.2 |
winlink1000OduAirHssSyncStatusEthEthernet HSS Client Synchronization Levelro Enumeration .1.3.6.1.4.1.4458.1000.1.5.40.30 |
winlink1000OduAirHssEthVLANTagEthernet HSS VLan Tag:
The least significate decimal digit is the VLan Priority(0-6)
and the rest of the digits represents VLan ID (2-4094)rw INTEGER .1.3.6.1.4.1.4458.1000.1.5.40.31 |
winlink1000OduAirHssHSMIPAddressHSMs IP address. Relevant for HSC synchronized over Ethernet.ro IpAddress .1.3.6.1.4.1.4458.1000.1.5.40.32 |
winlink1000OduAirHssDelayToHSMDelay in microseconds to HSM. Relevant for HSC synchronized over Ethernet.ro INTEGER .1.3.6.1.4.1.4458.1000.1.5.40.33 |
winlink1000OduAirHssSyncAcquisitionSecondsAccumulated quantity of seconds in clock acquisition while connected to current HSMrw INTEGER .1.3.6.1.4.1.4458.1000.1.5.40.34 |
winlink1000OduAirHssHSMIPv6AddressHSMs IPv6 address. Relevant for HSC synchronized over Ethernet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4458.1000.1.5.40.35 |
winlink1000OduAirLockRemoteThis parameter enables locking the link with a specific ODU.
The following values can be set:
Unlock (default) - The ODU is not locked on a specific remote ODU. Unlock can only be performed when the link is not connected.
Lock - The ODU is locked on a specific remote ODU. Lock can only be performed when the link is active.rw Enumeration .1.3.6.1.4.1.4458.1000.1.5.41 |