RADIO-BRIDGE-MH-TG-MIB
AI MIB Summary
The RADIO-BRIDGE-MH-TG-MIB module provides SNMP-based monitoring and configuration capabilities for Siklu Multihaul TG microwave radio bridges, specifically tracking link layer metrics such as throughput, signal quality (SNR, RSSI), and interface status for Multihaul transport gateways.
The MIB module for managing Siklu Multihaul TG products. Copyright 2023 by Siklu Communication Ltd. All rights reserved.
Main OID:
rbTgMIB.1.3.6.1.4.1.31926.35
59
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
59 total| Object Name |
|---|
rbTgMIBThe MIB module for managing Siklu Multihaul TG products.
Copyright 2023 by Siklu Communication Ltd. All rights reserved. MODULE-IDENTITY .1.3.6.1.4.1.31926.35 |
rbTgMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.31926.35.1 |
rbTgRadioCommon OBJECT IDENTIFIER .1.3.6.1.4.1.31926.35.1.1 |
rbTgRcNodeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.31926.35.1.1.1 |
rbTgRcSectorsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.31926.35.1.1.2 |
rbTgRcLinks OBJECT IDENTIFIER .1.3.6.1.4.1.31926.35.1.1.3 |
rbTgRcLinksActiveTableA list of all connected RF links and their parameters (initiated and responded) indexed by ifIndex. SEQUENCE OF RbTgRcLinksActiveEntry .1.3.6.1.4.1.31926.35.1.1.3.1 |
rbTgRcLinksActiveEntryAn entry containing management information applicable to a particular RF link. RbTgRcLinksActiveEntry .1.3.6.1.4.1.31926.35.1.1.3.1.1 |
rbTgRcLinksActiveIfIndexThe ifIndex value that identifies the RF link.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.31926.35.1.1.3.1.1.1 |
rbTgRcLinksActiveRemoteNameThe network Assigned Name/ID (AN) of the remote unit to which an RF link is defined.ro RbTgRadioNodeAssignedName .1.3.6.1.4.1.31926.35.1.1.3.1.1.2 |
rbTgRcLinksActiveActualRemoteSectorThe remote sector index that the RF link is associated to (in the remote unit).ro RbTgRadioSectorIndex .1.3.6.1.4.1.31926.35.1.1.3.1.1.3 |
rbTgRcLinksActiveActualLocalSectorThe local sector index that the RF link is associated from.ro RbTgRadioSectorIndex .1.3.6.1.4.1.31926.35.1.1.3.1.1.4 |
rbTgRcLinksActiveLocalRoleDescribes whether the local unit initiated the RF link or responded to it.ro RbTgRadioNodeLocalRole .1.3.6.1.4.1.31926.35.1.1.3.1.1.5 |
rbTgRcLinksActiveLinkUptimeThe value of sysUpTime at the time the RF link was changed state to UP.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.31926.35.1.1.3.1.1.6 |
rbTgRcLinksActiveRssiReceived signal strength indicator. Range: -200dBm to 0dBm, resolution of 1dBm.ro INTEGER (-200..0) UNITS "dBm" .1.3.6.1.4.1.31926.35.1.1.3.1.1.7 |
rbTgRcLinksActiveSnrSignal-to-Noise Ratio. Range: -50dB to +100dB, resolution of 0.1dB.ro DisplayString UNITS "dB" .1.3.6.1.4.1.31926.35.1.1.3.1.1.8 |
rbTgRcLinksActiveMcsRxCurrent Modulation Coding Scheme index of RX.ro RbTgRadioMcs .1.3.6.1.4.1.31926.35.1.1.3.1.1.9 |
rbTgRcLinksActiveMcsTxCurrent Modulation Coding Scheme index of TX.ro RbTgRadioMcs .1.3.6.1.4.1.31926.35.1.1.3.1.1.10 |
rbTgRcLinksActiveRxPerCurrent Packet Error Rate (PER) of RX, in percentage. 2 fraction-digits accuracy.ro DisplayString UNITS "Percentage" .1.3.6.1.4.1.31926.35.1.1.3.1.1.11 |
rbTgRcLinksActiveTxPerCurrent Packet Error Rate (PER) of TX, in percentage. 2 fraction-digits accuracy.ro DisplayString UNITS "Percentage" .1.3.6.1.4.1.31926.35.1.1.3.1.1.12 |
rbTgRcLinksActiveTxPowerIndexCurrent Transmit Power Index (relative).ro RbTgRadioTxPowerIndex .1.3.6.1.4.1.31926.35.1.1.3.1.1.13 |
rbTgRcLinksActiveSpeedRxCurrent over-the-air (OTA) rate of RX.ro RbTgRadioRfLinkSpeed UNITS "Mbps" .1.3.6.1.4.1.31926.35.1.1.3.1.1.14 |
rbTgRcLinksActiveSpeedTxCurrent over-the-air (OTA) rate of TX.ro RbTgRadioRfLinkSpeed UNITS "Mbps" .1.3.6.1.4.1.31926.35.1.1.3.1.1.15 |
rbTgRcLinksActiveBeamIndexRxCurrent index of active RX beam.ro RbTgRadioBeamIndex .1.3.6.1.4.1.31926.35.1.1.3.1.1.16 |
rbTgRcLinksActiveBeamAzimuthRxCurrent azimuth direction of active RX beam.ro RbTgRadioBeamAngle UNITS "Degrees" .1.3.6.1.4.1.31926.35.1.1.3.1.1.17 |
rbTgRcLinksActiveBeamElevationRxCurrent elevation direction of active RX beam.ro RbTgRadioBeamAngle UNITS "Degrees" .1.3.6.1.4.1.31926.35.1.1.3.1.1.18 |
rbTgRcLinksActiveActiveTileCountRxCurrent count of active RF tiles for RX beam.ro RbTgRadioActiveTilesCount .1.3.6.1.4.1.31926.35.1.1.3.1.1.19 |
rbTgRcLinksActiveBeamIndexTxCurrent index of active TX beam.ro RbTgRadioBeamIndex .1.3.6.1.4.1.31926.35.1.1.3.1.1.20 |
rbTgRcLinksActiveBeamAzimuthTxCurrent azimuth direction of active TX beam.ro RbTgRadioBeamAngle UNITS "Degrees" .1.3.6.1.4.1.31926.35.1.1.3.1.1.21 |
rbTgRcLinksActiveBeamElevationTxCurrent elevation direction of active TX beam.ro RbTgRadioBeamAngle UNITS "Degrees" .1.3.6.1.4.1.31926.35.1.1.3.1.1.22 |
rbTgRcLinksActiveActiveTileCountTxCurrent count of active RF tiles for TX beam.ro RbTgRadioActiveTilesCount .1.3.6.1.4.1.31926.35.1.1.3.1.1.23 |
rbTgRcLinksActiveCounterRxOkNumber of successfully received frames/MPDUs.ro Counter64 .1.3.6.1.4.1.31926.35.1.1.3.1.1.24 |
rbTgRcLinksActiveCounterTxOkNumber of successfully transmitted frames/MPDUs.ro Counter64 .1.3.6.1.4.1.31926.35.1.1.3.1.1.25 |
rbTgRcLinksActiveCounterRxFailNumber of CRC failed frames received (Once CRC fail, cannot trust RA as well).ro Counter64 .1.3.6.1.4.1.31926.35.1.1.3.1.1.26 |
rbTgRcLinksActiveCounterTxFailNumber of transmission failures.ro Counter64 .1.3.6.1.4.1.31926.35.1.1.3.1.1.27 |
rbTgRcLinksActiveCounterRxHcsFailNumber of received frames with HCS failed PLCP header.ro Counter64 .1.3.6.1.4.1.31926.35.1.1.3.1.1.28 |
rbTgRcLinksActiveCounterTxFailuresTotal number of TX packets dropped due to lifetime expiry.ro Counter64 .1.3.6.1.4.1.31926.35.1.1.3.1.1.29 |
rbTgRcLinksActiveCounterRxFailuresTotal number of RX packets failures.ro Counter64 .1.3.6.1.4.1.31926.35.1.1.3.1.1.30 |
rbTgRcLinksActiveCounterRxDropBufSizeTotal RX Discard count due to Buffer overflow.ro Counter64 .1.3.6.1.4.1.31926.35.1.1.3.1.1.31 |
rbTgRcLinksActiveCounterRxDropEncryptionFailTotal RX Discard count due to Encryption failure.ro Counter64 .1.3.6.1.4.1.31926.35.1.1.3.1.1.32 |
rbTgRcLinksActiveCounterRxDropRaMismatchTotal RX Discard count due to RA mismatch.ro Counter64 .1.3.6.1.4.1.31926.35.1.1.3.1.1.33 |
rbTgRcLinksActiveCounterRxDropUnexpectedTotal RX Discard count due to other unexpected reasons or PER emulator.ro Counter64 .1.3.6.1.4.1.31926.35.1.1.3.1.1.34 |
rbTgRadioDn OBJECT IDENTIFIER .1.3.6.1.4.1.31926.35.1.2 |
rbTgRdNodeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.31926.35.1.2.1 |
rbTgRdSectorsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.31926.35.1.2.2 |
rbTgRdLinks OBJECT IDENTIFIER .1.3.6.1.4.1.31926.35.1.2.3 |
rbTgRdLinksConfiguredTableA list of all RF links that the Data Node will try to initiate indexed by ifIndex. SEQUENCE OF RbTgRdLinksConfiguredEntry .1.3.6.1.4.1.31926.35.1.2.3.1 |
rbTgRdLinksConfiguredEntryAn entry containing management information applicable to a particular RF link. RbTgRdLinksConfiguredEntry .1.3.6.1.4.1.31926.35.1.2.3.1.1 |
rbTgRdLinksConfiguredIfIndexThe ifIndex value that identifies the RF link.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.31926.35.1.2.3.1.1.1 |
rbTgRdLinksConfiguredRemoteNameThe network Assigned Name/ID (AN) of the remote unit to which an RF link is defined.ro RbTgRadioNodeAssignedName .1.3.6.1.4.1.31926.35.1.2.3.1.1.2 |
rbTgRdLinksConfiguredResponderNodeTypeThe requested Node type of the remote Node. The RF link will be rejected if the
remote Node is already configured to a different type by another active RF link.
To avoid rejected, the rules are:
1. Any RF link to a base unit must set the value to rrntDn.
2. Any RF link to a terminal unit must set the value to rrntCn.ro RbTgRadioDnResponderNodeType .1.3.6.1.4.1.31926.35.1.2.3.1.1.3 |
rbTgRdLinksConfiguredControlSuperframeTime slot at which the local node exchanges control information with the remote node.
If responder-node-type = Client Node (CN): must be set to unspecified.
If responder-node-type = Distribution Node (DN): can be either 0 or 1,
but different between remote DNs on the same local sector (can be maximum 2 DN to DN
links per RF sector).ro RbTgRadioDnControlSuperframe .1.3.6.1.4.1.31926.35.1.2.3.1.1.4 |
rbTgRdLinksConfiguredAdminStatusDefines whether to initiate the link (and keep it up) or
drop it (in case it was already established).ro RbTgAdminStatus .1.3.6.1.4.1.31926.35.1.2.3.1.1.5 |
rbTgRdLinksConfiguredLocalSectorBitmapA bit map representation of the local RF sectors list.
For example: local sector 1 and local sector 2 will result in 0x3.ro RbTgRadioDnSectorBitmap .1.3.6.1.4.1.31926.35.1.2.3.1.1.6 |
rbTgRdLinksConfiguredRemoteSectorBitmapA bit map representation of the remote RF sectors list.
For example: remote sector 1 and remote sector 2 will result in 0x3.ro RbTgRadioDnSectorBitmap .1.3.6.1.4.1.31926.35.1.2.3.1.1.7 |
rbTgRdLinksConfiguredLinkStatePossible states of RF link ignition.ro RbTgRadioDnLinkState .1.3.6.1.4.1.31926.35.1.2.3.1.1.8 |
rbTgRdLinksConfiguredTxGolayIndexTx Golay index of Golay code sequence.ro RbTgRadioGolayIndex .1.3.6.1.4.1.31926.35.1.2.3.1.1.9 |
rbTgRdLinksConfiguredRxGolayIndexRx Golay index of Golay code sequence.ro RbTgRadioGolayIndex .1.3.6.1.4.1.31926.35.1.2.3.1.1.10 |
rbTgGroups OBJECT IDENTIFIER .1.3.6.1.4.1.31926.35.2 |