QLGC-adapterInfo-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for QLGC-adapterInfo-MIB.
29
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
qlogic OBJECT IDENTIFIER .1.3.6.1.4.1.3873 |
IMPORTS Unknown .1.3.6.1.4.1.3873 |
enet OBJECT IDENTIFIER .1.3.6.1.4.1.3873.1 |
qlasp OBJECT IDENTIFIER .1.3.6.1.4.1.3873.1.2 |
qlaspConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3873.1.2.1 |
qlaspStat OBJECT IDENTIFIER .1.3.6.1.4.1.3873.1.2.2 |
qlaspTrap OBJECT IDENTIFIER .1.3.6.1.4.1.3873.1.2.3 |
ifControllers OBJECT IDENTIFIER .1.3.6.1.4.1.3873.1.3 |
ifiNumberThe number of QLogic network interfaces (regardless
of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.3873.1.3.1 |
ifiTableA list of QLogic network interface entries.
The number of entries is given by the ifiNumber. SEQUENCE OF IfiEntry .1.3.6.1.4.1.3873.1.3.2 |
ifiEntryAn entry containing statistics objects of a QLogic
network interface in this system. IfiEntry .1.3.6.1.4.1.3873.1.3.2.1 |
ifiIndexAn unique value for each QLogic interface.
The value for each interface must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization. INTEGER .1.3.6.1.4.1.3873.1.3.2.1.1 |
ifNameA textual string containing name of the adapter or teamro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3873.1.3.2.1.2 |
ifiDescrA textual string containing the adapter or team descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3873.1.3.2.1.3 |
ifNetworkAddressIP address of the adapter.ro IpAddress .1.3.6.1.4.1.3873.1.3.2.1.4 |
ifSubnetMaskIP subnet Mask of the adapter.ro IpAddress .1.3.6.1.4.1.3873.1.3.2.1.5 |
ifiPhysAddressMAC address of the adapter.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3873.1.3.2.1.6 |
ifPermPhysAddressPermanent MAC address of the adapter.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3873.1.3.2.1.7 |
ifLinkStatusAdapter link status, this information only
applicable to the QLogic adapterro Enumeration .1.3.6.1.4.1.3873.1.3.2.1.8 |
ifStateThe operating mode of the driver, this information only
applicable to the QLogic adapterro Enumeration .1.3.6.1.4.1.3873.1.3.2.1.9 |
ifLineSpeedThe operating speed of the adapter, this information only
applicable to the QLogic adapterro Enumeration .1.3.6.1.4.1.3873.1.3.2.1.10 |
ifDuplexModeAdapter duplex mode, this information only
applicable to the QLogic adapterro Enumeration .1.3.6.1.4.1.3873.1.3.2.1.11 |
ifMemBaseLowmemory low range of the adapter, this information only
applicable to the QLogic adapterro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3873.1.3.2.1.12 |
ifMemBaseHighmemory high range of the adapter, this information only
applicable to the QLogic adapterro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3873.1.3.2.1.13 |
ifInterruptIRQ value for the adapter, this information only
applicable to the QLogic adapterro INTEGER .1.3.6.1.4.1.3873.1.3.2.1.14 |
ifBusNumberPCI Bus Number where the Adapter is situated, this information only
applicable to the QLogic adapterro INTEGER .1.3.6.1.4.1.3873.1.3.2.1.15 |
ifDeviceNumberPCI Device Number of the adapter, this information only
applicable to the QLogic adapterro INTEGER .1.3.6.1.4.1.3873.1.3.2.1.16 |
ifFunctionNumberPCI Function Number of the adapter, this information only
applicable to the QLogic adapterro INTEGER .1.3.6.1.4.1.3873.1.3.2.1.17 |
ifIpv6NetworkAddressIPv6 address of the adapter.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.3873.1.3.2.1.18 |