PRVT-VRRP-MIB
The PRVT-VRRP-MIB module enables monitoring of Virtual Router Redundancy Protocol (VRRP) instances, specifically tracking router priority, state transitions, advertisement intervals, and preemption behavior across network devices. It facilitates the collection of counters and status variables required to verify redundancy health, detect failover events, and validate the operational consistency of VRRP groups in high-availability topologies.
Imported Objects
Objects
25 total| Object Name |
|---|
prvtVrrpMIBThis MIB describes objects used for managing Virtual Router Redundancy Protocol (VRRP) routers. MODULE-IDENTITY .1.3.6.1.4.1.738.1.5.167 |
prvtVrrpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.167.1 |
prvtVrrpVirtualRouterTable SEQUENCE OF PrvtVrrpVirtualRouterEntry .1.3.6.1.4.1.738.1.5.167.1.1 |
prvtVrrpVirtualRouterEntryNONE PrvtVrrpVirtualRouterEntry .1.3.6.1.4.1.738.1.5.167.1.1.1 |
prvtVrrpVirtualRouterId Unsigned32 .1.3.6.1.4.1.738.1.5.167.1.1.1.1 |
prvtVrrpVirtualRouterRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.167.1.1.1.2 |
prvtVrrpVirtualRouterShutdownrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.167.1.1.1.3 |
prvtVrrpVirtualRouterPreemptrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.167.1.1.1.4 |
prvtVrrpVirtualRouterPriorityrw Unsigned32 .1.3.6.1.4.1.738.1.5.167.1.1.1.5 |
prvtVrrpVirtualRouterVersionrw Unsigned32 .1.3.6.1.4.1.738.1.5.167.1.1.1.6 |
prvtVrrpVirtualRouterAdvertisedIntervalrw Unsigned32 (0 | 10..4095) .1.3.6.1.4.1.738.1.5.167.1.1.1.7 |
prvtVrrpVirtualRouterAcceptModerw Enumeration .1.3.6.1.4.1.738.1.5.167.1.1.1.8 |
prvtVrrpVirtualRouterInterfacerw OCTET STRING .1.3.6.1.4.1.738.1.5.167.1.1.1.9 |
prvtVrrpVirtualRouterTraceUplinkThresholdrw Unsigned32 .1.3.6.1.4.1.738.1.5.167.1.1.1.10 |
prvtVrrpVirtualRouterTraceUplinkFlushTimerrw Unsigned32 .1.3.6.1.4.1.738.1.5.167.1.1.1.11 |
prvtVrrpVirtualRouterStateVrrpro Enumeration .1.3.6.1.4.1.738.1.5.167.1.1.1.12 |
prvtVrrpVirtualIpAddressTable SEQUENCE OF PrvtVrrpVirtualIpAddressEntry .1.3.6.1.4.1.738.1.5.167.1.2 |
prvtVrrpVirtualIpAddressEntry PrvtVrrpVirtualIpAddressEntry .1.3.6.1.4.1.738.1.5.167.1.2.1 |
prvtVrrpVirtualIpAddress IpAddress .1.3.6.1.4.1.738.1.5.167.1.2.1.1 |
prvtVrrpVirtualIpAddressRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.167.1.2.1.2 |
prvtVrrpVirtualIpAddressRangerw Unsigned32 .1.3.6.1.4.1.738.1.5.167.1.2.1.3 |
prvtVrrpTraceUplinkTable SEQUENCE OF PrvtVrrpTraceUplinkEntry .1.3.6.1.4.1.738.1.5.167.1.3 |
prvtVrrpTraceUplinkEntry PrvtVrrpTraceUplinkEntry .1.3.6.1.4.1.738.1.5.167.1.3.1 |
prvtVrrpTraceUplinkName OCTET STRING .1.3.6.1.4.1.738.1.5.167.1.3.1.1 |
prvtVrrpTraceUplinkRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.167.1.3.1.2 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →SNMP MIB module
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
SNMP MIB module
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.