PRVT-UPS-MIB
The PRVT-UPS-MIB module enables SNMP-based monitoring of Uninterruptible Power Supply (UPS) units connected to Privilege or ipSwitch network hardware. It facilitates the retrieval of critical power status metrics, including input/output voltage, battery charge levels, load capacity, and alarm conditions, to ensure power continuity for the switch infrastructure.
Imported Objects
Objects
11 total| Object Name |
|---|
prvtUPSMibMIB module for monitoring the UPS connected to switch or ipSwitch MODULE-IDENTITY .1.3.6.1.4.1.738.1.5.103 |
prvtUPSNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.103.0 |
upsStatusChangeThe upsStatusChange trap indicates that the sending agent monitor detected a change in the status of the external UPS, connected to the device. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.103.0.1 |
upsStatus OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.103.1 |
upsConnectedStatusThis object indicates, if a UPS is connected to the device.ro Enumeration .1.3.6.1.4.1.738.1.5.103.1.1 |
upsLinePowerStatusThis object indicates the external AD power line status: the UPS is supplying the power from the internal battery or from an external AC power connection.ro Enumeration .1.3.6.1.4.1.738.1.5.103.1.2 |
upsBatteryStorageStatusThis object shows the estimated time left until the UPS battery will discharge to the level at which the UPS must shutdown.ro Enumeration .1.3.6.1.4.1.738.1.5.103.1.3 |
upsInternalStatusThis object shows if the UPS has some kind of an internal failure.ro Enumeration .1.3.6.1.4.1.738.1.5.103.1.4 |
prvtUPSConformance OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.103.2 |
prvtUPSMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.103.2.2 |
prvtUPSNotificationGroupPrivate Notification Group. Unknown .1.3.6.1.4.1.738.1.5.103.2.2.3 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →SNMP MIB module
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
SNMP MIB module
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.