PRVT-TWAMP-MIB
The PRVT-TWAMP-MIB enables the configuration and control of Two-Way Active Measurement Protocol (TWAMP) sessions to measure network performance metrics such as latency, jitter, and packet loss. It facilitates the provisioning of test sessions between TWAMP controllers and reflectors for active path analysis.
Imported Objects
Objects
45 total| Object Name |
|---|
prvtTwampMIBThis MIB provides the extended capability of controlling and provisioning of TWAMP tests. MODULE-IDENTITY .1.3.6.1.4.1.738.1.5.240 |
prvtTwampNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.240.0 |
prvtTwampObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.240.1 |
prvtTwampTest OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.240.1.1 |
prvtTwampTestTableTable contains TWAMP tests. SEQUENCE OF PrvtTwampTestEntry .1.3.6.1.4.1.738.1.5.240.1.1.1 |
prvtTwampTestEntryEntry in prvtTwampTestTable PrvtTwampTestEntry .1.3.6.1.4.1.738.1.5.240.1.1.1.1 |
prvtTwampTestNameTWAMP test name. PrvtTwampTestNameType .1.3.6.1.4.1.738.1.5.240.1.1.1.1.1 |
prvtTwampTestRowStatusCreate/delete entry in prvtTwampTestTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.240.1.1.1.1.2 |
prvtTwampTestServerTWAMP test server ip-address.rw IpAddress .1.3.6.1.4.1.738.1.5.240.1.1.1.1.3 |
prvtTwampTestSessionsCountThe number of parallel test sessions.rw Integer32 .1.3.6.1.4.1.738.1.5.240.1.1.1.1.4 |
prvtTwampTestPacketsThe number of packets in parallel sessions.rw Integer32 .1.3.6.1.4.1.738.1.5.240.1.1.1.1.5 |
prvtTwampTestTimeoutThe timout interval of test packets (in milliseconds).rw Integer32 .1.3.6.1.4.1.738.1.5.240.1.1.1.1.6 |
prvtTwampTestDelayThe delay interval between test packets (in milliseconds)rw Integer32 .1.3.6.1.4.1.738.1.5.240.1.1.1.1.7 |
prvtTwampTestExecuteNowWhen this object is set to '1', command self-test execute-now. When this object is set to '2' the self-test is stopped. Setting the variable to '0' results in an 'inconsistentValue' error. Setting it to any other value has no effect. When this object is read, the value '0' is returned.rw Integer32 .1.3.6.1.4.1.738.1.5.240.1.1.1.1.8 |
prvtTwampServer OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.240.1.2 |
prvtTwampServerInnactivityThe server innactivity timeout interval of the TWAMP server (in seconds).rw Integer32 .1.3.6.1.4.1.738.1.5.240.1.2.2 |
prvtTwampServerSessionInnactivityThe session innactivity timeout interval of the TWAMP server (in seconds).rw Integer32 .1.3.6.1.4.1.738.1.5.240.1.2.3 |
prvtTwampServerMaxSessionsThe maximum number of controll sessions supported by the TWAMP server.rw Integer32 .1.3.6.1.4.1.738.1.5.240.1.2.4 |
prvtTwampServerMaxParallelSessionsThe maximum number of parallel test sessions for each client supperted by the TWAMP server.rw Integer32 .1.3.6.1.4.1.738.1.5.240.1.2.5 |
prvtTwampServerShutdownThe administrative state of the TWAMP server.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.240.1.2.6 |
prvtTwampClientTableTable contains the allowed clients for the TWAMP server. SEQUENCE OF PrvtTwampClientEntry .1.3.6.1.4.1.738.1.5.240.1.2.7 |
prvtTwampClientEntryEntry in twampClientTable. PrvtTwampClientEntry .1.3.6.1.4.1.738.1.5.240.1.2.7.1 |
prvtTwampClientIpThe ip-address of the client. IpAddress .1.3.6.1.4.1.738.1.5.240.1.2.7.1.1 |
prvtTwampClientRowStatuscreate/delete entry in prvtTwampClientTablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.240.1.2.7.1.2 |
prvtTwampServerControlSessionsThe number of current control sessions established on the TWAMP server.ro Integer32 .1.3.6.1.4.1.738.1.5.240.1.2.8 |
prvtTwampServerTestSessionsThe number of current test sessions established on the TWAMP server.ro Integer32 .1.3.6.1.4.1.738.1.5.240.1.2.9 |
prvtTwampTestResult OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.240.1.3 |
prvtTwampTestResultTableTable contains statistics of the executed TWAMP tests. SEQUENCE OF PrvtTwampTestResultEntry .1.3.6.1.4.1.738.1.5.240.1.3.1 |
prvtTwampTestResultEntryEntry in twampTestResultTable PrvtTwampTestResultEntry .1.3.6.1.4.1.738.1.5.240.1.3.1.1 |
prvtTwampTestIdThe internal ID of the TWAMP test instance.ro Unsigned32 .1.3.6.1.4.1.738.1.5.240.1.3.1.1.1 |
prvtTwampTestResultNameTWAMP test name.ro PrvtTwampTestNameType .1.3.6.1.4.1.738.1.5.240.1.3.1.1.2 |
prvtTwampTestStartTimeThe start time of the TWAMP test instance.ro Unsigned32 .1.3.6.1.4.1.738.1.5.240.1.3.1.1.3 |
prvtTwampTestServerAddressThe server ip-address of the TWAMP test instance.ro IpAddress .1.3.6.1.4.1.738.1.5.240.1.3.1.1.4 |
prvtTwampTestSessionsThe number of parallel test sessions of the TWAMP test instance.ro Unsigned32 .1.3.6.1.4.1.738.1.5.240.1.3.1.1.5 |
prvtTwampTestStateThe status of the executed TWAMP test instance.ro Enumeration .1.3.6.1.4.1.738.1.5.240.1.3.1.1.6 |
prvtTwampTestRttThe average round-trip time of the TWAMP test sample.ro Counter64 .1.3.6.1.4.1.738.1.5.240.1.3.1.1.7 |
prvtTwampTestMinRttThe minimum round-trip time of the TWAMP test sample.ro Counter64 .1.3.6.1.4.1.738.1.5.240.1.3.1.1.8 |
prvtTwampTestMaxRttThe maximum round-trip time of the TWAMP test sample.ro Counter64 .1.3.6.1.4.1.738.1.5.240.1.3.1.1.9 |
prvtTwampTestPcktSentThe number of test packets sent for the TWAMP test instance.ro Unsigned32 .1.3.6.1.4.1.738.1.5.240.1.3.1.1.10 |
prvtTwampTestPcktLostThe number of lost test packets.ro Unsigned32 .1.3.6.1.4.1.738.1.5.240.1.3.1.1.11 |
prvtTwampTestPcktDropThe number of dropped test packets.ro Unsigned32 .1.3.6.1.4.1.738.1.5.240.1.3.1.1.12 |
prvtTwampTestVariationThe maximum module variation of the TWAMP test samplero Counter64 .1.3.6.1.4.1.738.1.5.240.1.3.1.1.13 |
prvtTwampTestVariationLowThe percent of singletons whose variation is less than 10% of the negated maximum module variation of the sample.ro PrvtTwampDecimalPercent .1.3.6.1.4.1.738.1.5.240.1.3.1.1.14 |
prvtTwampTestVariationMiddleThe percent of singletons whose variation by module is less than 10% of the maximum module variation of the sample.ro PrvtTwampDecimalPercent .1.3.6.1.4.1.738.1.5.240.1.3.1.1.15 |
prvtTwampTestVariationHighThe percent of singletons whose variation is greater than 10% of the maximum module variation of the sample.ro PrvtTwampDecimalPercent .1.3.6.1.4.1.738.1.5.240.1.3.1.1.16 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →SNMP MIB module
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
SNMP MIB module
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.