PRVT-TEMIB-ENTITY-MIB
The MIB module for management of TE-MIB entities.
Main OID:
prvtTeMibEntityMib.1.3.6.1.4.1.738.1.6.5.8
37
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
prvtTeMibEntityMibThe MIB module for management of TE-MIB entities. MODULE-IDENTITY .1.3.6.1.4.1.738.1.6.5.8 |
prvtTeMibEntityObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.6.5.8.1 |
prvtMplsTeMibEntityTableThe table of TE-MIB entities. SEQUENCE OF PrvtMplsTeMibEntityEntry .1.3.6.1.4.1.738.1.6.5.8.1.1 |
prvtMplsTeMibEntityEntryEach entry represents a TE-MIB entity. PrvtMplsTeMibEntityEntry .1.3.6.1.4.1.738.1.6.5.8.1.1.1 |
prvtMplsTeMibEntityIndexThe index of this TE-MIB entity table entry. This is the HAF entity index passed on the entity create parameters. PrvtTeMibEntityIndex .1.3.6.1.4.1.738.1.6.5.8.1.1.1.1 |
prvtMplsTeMibEntityAdminStatusThe desired administrative state of the TE-MIB entity. When prvtMplsTeMibEntityRowStatus is 'active' and prvtMplsTeMibEntityAdminStatus is 'up' the TE-MIB entity is active and only these two fields can be modified.rw PrvtTeMibAdminStatus .1.3.6.1.4.1.738.1.6.5.8.1.1.1.2 |
prvtMplsTeMibEntityOperStatusThe current operational state of the TE-MIB entity.ro PrvtTeMibOperStatus .1.3.6.1.4.1.738.1.6.5.8.1.1.1.3 |
prvtMplsTeMibEntityRowStatusThe row status for the TE-MIB entity table entry, used to create and destroy TE-MIB entities. When prvtMplsTeMibEntityRowStatus is 'active' and prvtMplsTeMibEntityAdminStatus is 'up' the TE-MIB entity is active and only these two fields can be modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.6.5.8.1.1.1.4 |
prvtMplsTeMibTunnelRetryIntervalThe persistent tunnel retry interval. This is the interval between the first failure of a persistent tunnel and the first attempt to re-establish the tunnel. A value of 0 indicates retrying is not supported. A management agent may preempt a retry by resetting mplsTunnelAdminStatus for the tunnel in question.rw Unsigned32 .1.3.6.1.4.1.738.1.6.5.8.1.1.1.5 |
prvtMplsTeMibTunnelRetryDecayRateThe persistent tunnel decay rate. This is a percentage. Thus a value of 10 increases the retry interval by ten per cent of the previous value. A value of 0 indicates a constant retry rate.rw Unsigned32 .1.3.6.1.4.1.738.1.6.5.8.1.1.1.6 |
prvtMplsTeMibTunnelRetryMaxThe maximum number of retry attempts that will be made before a persistent tunnel is deemed inoperable. Once in this state, a management agent should set mplsTunnelAdminStatus to 'up' to attempt to reestablish the tunnel. A value of -1 indicates infinite retry, so a persistent tunnel will continue to be retried until it is successfully established.rw Integer32 (-1..255) .1.3.6.1.4.1.738.1.6.5.8.1.1.1.7 |
prvtMplsTeMibTnnlBufPoolSizeThe maximum number of buffers available for tunnel management messages. This is used to limit the number of tunnel management messages to avoid buffer shortage conditions.rw Unsigned32 .1.3.6.1.4.1.738.1.6.5.8.1.1.1.8 |
prvtMplsTeMibLsrIndexThe index of the PRVT-LMGR product instance which this TE-MIB is to join to as its LDB interface provider. If this value is not specified, or the value of this object is 0, TE-MIB will use the prvtMplsTeMibEntityIndex value as the Lsr index when joining on the LDB interface.rw PrvtLmgrIndex (PRVT-LMGR-MIB) .1.3.6.1.4.1.738.1.6.5.8.1.1.1.9 |
prvtMplsTeMibLdbStatusDiagnostic Field providing information about the status of the Label Database Interface user as seen by the TE-MIB entity.ro PrvtTeMibPartnerStatus .1.3.6.1.4.1.738.1.6.5.8.1.1.1.10 |
prvtMplsTeMibLraStatusDiagnostic Field providing information about the status of the LRAPI user as seen by the TE-MIB entity.ro PrvtLmgrPartnerStatus (PRVT-LMGR-MIB) .1.3.6.1.4.1.738.1.6.5.8.1.1.1.11 |
prvtMplsTeMibLdiStatusA diagnostic value which reports the state of the LDI join.ro PrvtTeMibPartnerStatus .1.3.6.1.4.1.738.1.6.5.8.1.1.1.12 |
prvtMplsTeMibRsvpEnableA boolean indicating whether the PRVT-TE-MIB should expect a join from PRVT-RSVP across the LRAPI. This indicates whether RSVP-TE LSP tunnels are supported or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.6.5.8.1.1.1.13 |
prvtMplsTeMibCrldpEnableA boolean indicating whether the PRVT-TE-MIB should join to PRVT-CR-LDP or not across the LDI, and therefore support CR-LDP LSP tunnels or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.6.5.8.1.1.1.14 |
prvtMplsTeMibCrldpIndexThe index of the PRVT-MPLS product instance which this TE-MIB is to join to as its LDI interface provider. If this value is not specified, or the value of this object is 0, TE-MIB will use the prvtMplsTeMibEntityIndex value as the CR-LDP product index when joining on the LDI interface.rw Unsigned32 .1.3.6.1.4.1.738.1.6.5.8.1.1.1.15 |
prvtMplsTeMibUseRsvpResvConfFlags field indicating whether a RESV_CONFIRM object should be included in RSVP Resv messages. The possible bit values are as follows. - useResvConfForUNI: RESV_CONFIRM objects should be inserted into all UNI Resv messages. - useResvConfForGMPLS: RESV_CONFIRM objects should be inserted into all standard GMPLS Resv messages.rw Bits .1.3.6.1.4.1.738.1.6.5.8.1.1.1.16 |
prvtMplsTeMibAllowGracefulDeletionA boolean indicating whether the TE-MIB should allow tunnels to be deleted using the graceful deletion procedure.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.6.5.8.1.1.1.17 |
prvtMplsTeMibShowTransitTunnelsA flag to indicate whether RSVP should inform TE-MIB about LSPs for which this node is transit.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.6.5.8.1.1.1.18 |
prvtMplsTeMibSupportCHopTableA flag to indicate whether TE-MIB should support the mplsTunnelCHopTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.6.5.8.1.1.1.19 |
prvtMplsTeMibNhrIndexThe index of the PRVT-MPLS product instance which this TE-MIB is to join to as its NHR interface provider. If this value is not specified, or the value of this object is 0, TE-MIB will use the prvtMplsTeMibEntityIndex value as the LSR index when joining on the NHR interface.rw Unsigned32 .1.3.6.1.4.1.738.1.6.5.8.1.1.1.20 |
prvtMplsTeMibNhrBufPoolSizeThe maximum number of buffers available for Next Hop Routing Interface messages. This is used to limit the number of tunnel management messages to avoid buffer shortage conditions.rw Unsigned32 .1.3.6.1.4.1.738.1.6.5.8.1.1.1.21 |
prvtMplsTeMibNhrStatusA diagnostic value which reports the state of the NHR join.ro PrvtTeMibPartnerStatus .1.3.6.1.4.1.738.1.6.5.8.1.1.1.22 |
prvtMplsTeMibExtPrtSuppAdminStatusThe desired operational state of support for the extended PROTECTION object defined in draft-lang-ccamp-gmpls-recovery-e2e-signaling.rw PrvtTeMibAdminStatus .1.3.6.1.4.1.738.1.6.5.8.1.1.1.23 |
prvtMplsTeMibRsvpIpv6AdminStatusSpecifies whether the local node supports IPv6 LSPs. Setting this to UP means that this node supports IPv6 LSPs being set up to, from and through this node. Setting this to DOWN means that IPv6 LSPs are NOT supported by this node. Existing IPv6 LSPs for which this node is the ingress are torn down. This field can be modified while TE-MIB is oper_status UP or DOWN. The value of this field MUST match the value of the dcRsvpProductIpv6AdminStatus field in the dcRsvpProductTable.rw PrvtTeMibAdminStatus .1.3.6.1.4.1.738.1.6.5.8.1.1.1.24 |
prvtMplsTeMibRsvpIpv6OperStatusThe current operational status for IPv6 support. When this is UP IPv6 LSPs can be set up from this node. When this is DOWN there will be no active IPv6 LSPs.ro PrvtTeMibOperStatus .1.3.6.1.4.1.738.1.6.5.8.1.1.1.25 |
prvtMplsTeMibDynFacilityBypassThis object gives the user ability to globally enable/disable automatically creation of bypass tunnels for all LSPs. Bypass tunnels will be created on FRR tunnel request automatically. The default value is true. The creation of Dynamic bypass tunnels is enabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.6.5.8.1.1.1.26 |
prvtTeMibEntityConformance OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.6.5.8.2 |
prvtTeMibEntityCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.6.5.8.2.1 |
prvtTeMibEntityMibComplianceThe compliance statement for the PRVT-TEMIB product. Unknown .1.3.6.1.4.1.738.1.6.5.8.2.1.1 |
prvtTeMibEntityGroups OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.6.5.8.2.2 |
mplsTeMibMandatoryGroupMandatory Objects. Unknown .1.3.6.1.4.1.738.1.6.5.8.2.2.2 |
mplsTeMibOptionalGroupOptional Objects. Unknown .1.3.6.1.4.1.738.1.6.5.8.2.2.3 |
mplsTeMibCrldpGroupGroup of objects relating to CR-LDP Unknown .1.3.6.1.4.1.738.1.6.5.8.2.2.4 |