PRVT-STORM-CTL-MIB
The PRVT-STORM-CTL-MIB module configures and monitors storm control thresholds on private VLAN interfaces to suppress broadcast, multicast, and unknown unicast traffic flooding. It enables the enforcement of rate limits and the tracking of storm suppression events to maintain network stability during traffic anomalies.
Imported Objects
Objects
11 total| Object Name |
|---|
prvtStormCtlMIBThe MIB module for managing storm control. MODULE-IDENTITY .1.3.6.1.4.1.738.1.5.171 |
prvtStormCtlMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.171.1 |
prvtStrmCtlPortTableA list of interfaces that have storm control functionality configured. SEQUENCE OF PrvtStrmCtlPortEntry .1.3.6.1.4.1.738.1.5.171.1.1 |
prvtStrmCtlPortEntryAn entry in prvtStrmCtlPortTable. PrvtStrmCtlPortEntry .1.3.6.1.4.1.738.1.5.171.1.1.1 |
prvtStrmCtlPortRowStatusThe RowStatus for this port.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.171.1.1.1.1 |
prvtStrmCtlPortShutdownSet to 'false' to enable storm control functionality on this port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.171.1.1.1.3 |
prvtStrmCtlPortTrafficTableA table of traffic-type specific configuration for each interface. Currently, only one traffic type is supported per interface. SEQUENCE OF PrvtStrmCtlPortTrafficEntry .1.3.6.1.4.1.738.1.5.171.1.3 |
prvtStrmCtlPortTrafficEntryAn entry in prvtStrmCtlPortTrafficTable. PrvtStrmCtlPortTrafficEntry .1.3.6.1.4.1.738.1.5.171.1.3.1 |
prvtStrmCtlPortTrafficTypeThe type of traffic to which this row applies Enumeration .1.3.6.1.4.1.738.1.5.171.1.3.1.1 |
prvtStrmCtlPortTrafficRowStatusThe RowStatus for this traffic type.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.171.1.3.1.2 |
prvtStrmCtlPortTrafficThresholdThe threshold at which, when exceeded, traffic will undergo storm control action for this port and traffic type.rw RateThresholdType UNITS "packets-per-second" .1.3.6.1.4.1.738.1.5.171.1.3.1.3 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →SNMP MIB module
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
SNMP MIB module
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.