PRVT-SAA-MIB
AI MIB Summary
The PRVT-SAA-MIB module manages Cisco IOS IP SLA (Service Level Agreement) operations and OAM test provisioning, extending DISMAN-PING-MIB capabilities to monitor specific performance metrics such as round-trip latency, jitter, packet loss, and MOS scores for configured IP SLA probes.
This MIB provides the extended capability of controlling and provisioning various OAM tests and SAA monitoring. It adds extra functionality for DISMAN-PING-MIB
Main OID:
prvtSaaMib.1.3.6.1.4.1.738.1.5.130
179
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
179 total| Object Name |
|---|
prvtSaaMibThis MIB provides the extended capability of controlling and provisioning various OAM tests and SAA monitoring. It adds extra functionality for DISMAN-PING-MIB MODULE-IDENTITY .1.3.6.1.4.1.738.1.5.130 |
prvtSaaNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.130.0 |
prvtSaaRFC2544ProbeFailedThis trap should be sent whenever a SAA probe on a specific test fails. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.130.0.1 |
prvtSaaRFC2544ProbeSuccessThis trap should be sent whenever a SAA probe on a specific test finishes with success. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.130.0.2 |
prvtSaaRFC2544TestFinishedThis trap should be sent whenever a SAA RFC2544 test is finished NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.130.0.3 |
prvtSaaY1731DelayNEThresholdThis trap should be sent whenever the near end delay on a SAA Y1731 test will surpass one of the 2 defined thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.130.0.4 |
prvtSaaY1731DelayFEThresholdThis trap should be sent whenever the far end delay on a SAA Y1731 test will surpass one of the 2 defined thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.130.0.5 |
prvtSaaY1731JitterNEThresholdThis trap should be sent whenever the near end jitter on a SAA Y1731 test will surpass one of the 2 defined thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.130.0.6 |
prvtSaaY1731JitterFEThresholdThis trap should be sent whenever the far end jitter on a SAA Y1731 test will surpass one of the 2 defined thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.130.0.7 |
prvtSaaY1731FrLossNEThresholdThis trap should be sent whenever the near end frameloss on a SAA Y1731 test will surpass one of the 2 defined thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.130.0.8 |
prvtSaaY1731FrLossFEThresholdThis trap should be sent whenever the far end frameloss on a SAA Y1731 test will surpass one of the 2 defined thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.130.0.9 |
prvtSaaObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.130.1 |
prvtSaaTest OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.130.1.1 |
prvtSaaY1731PmTestTableThis table holds the configuration for a SAA Y1731 test SEQUENCE OF PrvtSaaY1731PmTestEntry .1.3.6.1.4.1.738.1.5.130.1.1.1 |
prvtSaaY1731PmTestEntryNONE PrvtSaaY1731PmTestEntry .1.3.6.1.4.1.738.1.5.130.1.1.1.1 |
prvtSaaY1731PmTestOwnerThis string is used to describe the owner of the Y1731 Pm SAA test. SnmpAdminString .1.3.6.1.4.1.738.1.5.130.1.1.1.1.1 |
prvtSaaY1731PmTestNameThis string is used to describe the test name for the Y1731 Pm SAA test. It is also used as a test identifier. SnmpAdminString .1.3.6.1.4.1.738.1.5.130.1.1.1.1.2 |
prvtSaaY1731PmTestTypeSAA Y1731 Pm test type.rw Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.1.1.3 |
prvtSaaY1731PmTestExecStatusSAA Y1731 Pm test execution status.ro Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.1.1.4 |
prvtSaaY1731PmTestEncapTypeSAA Y1731 Pm test encapsulation type. It can be either test over VLAN or test over Service. The value 1 is the default value representing that neither type is set.rw Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.1.1.5 |
prvtSaaY1731PmTestEncapValueThe value of the defined SAA Y1731 Pm test encapsulation. It should be either the Vlan ID or the Service ID, depending on the type set in prvtSaaY1731PmTestEncapType.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.6 |
prvtSaaY1731PmTestUserPortFor SAA Y1731 Pm test, this leaf is used only in case the encapsulation is VLAN type and it determines the port on which the user is connected.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.7 |
prvtSaaY1731PmTestUplinkPortFor SAA Y1731 Pm test, this leaf is used only in case the encapsulation is VLAN type and it determines the port that the SAA test devices are connected through.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.8 |
prvtSaaY1731PmTestTargetMacThe target MAC address for the SAA Y1731 test.rw DisplayString .1.3.6.1.4.1.738.1.5.130.1.1.1.1.9 |
prvtSaaY1731PmTestCfmDomainLevelCFM Domain level on which the test will be run.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.10 |
prvtSaaY1731PmTestRemoteCfmMepThe remote MEP associated with target MAC.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.11 |
prvtSaaY1731PmTestProfileThe profile ID associated to the SAA Y1731 Pm test. A value of 0 depicts no set profile.rw Unsigned32 (0|1..2147483647) .1.3.6.1.4.1.738.1.5.130.1.1.1.1.12 |
prvtSaaY1731PmTestHistoryDepthProbe history count.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.13 |
prvtSaaY1731PmTestPeriodThe period the SAA Y1731 Pm test will run, in milliseconds.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.14 |
prvtSaaY1731PmTestTimeoutThe timeout period for a test packet.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.15 |
prvtSaaY1731PmTestMonitorIntervalMonitoring interval is relevant only for continous Y1731 test. It is measured in minutes.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.16 |
prvtSaaY1731PmTestFrequencyThe time between two consecutive intervals. A value of 1 defines a delay of a second between the end of the first and the begining of the next interval.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.17 |
prvtSaaY1731PmTestClocksInSyncThis variable tells if the clocks of the test are syncronized.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.1.1.1.18 |
prvtSaaY1731PmTestDelayMethodDefines the method of calculating delay on a Y1731 test.rw Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.1.1.19 |
prvtSaaY1731PmTestDelayPvaluePercent used to calculate delay in p-percentile method. Reported delay is the percent-th member in the array with sorted delays. Relevant only for p-percentile method. Value in range of 1-100 is for percentile delay method of calculation. Value 101 describes that average delay method of calculation is used. Only values inside the 1..100 range can be set to this parameter.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.20 |
prvtSaaY1731PmTestJitterMethodDefines the method of calculating jitter on a Y1731 test.rw Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.1.1.21 |
prvtSaaY1731PmTestJitterPvaluePercent used to calculate jitter in p-percentile method. Reported jitter is the percent-th member in the array with sorted jitters. Relevant only for p-percentile method. Value in range of 1..100 is for percentile jitter method of calculation. Value 101 describes that peakToPeak jitter method of calculation is used. Value 102 describes that variance jitter method of calculation is used. Only values inside the 1..100 range can be set to this parameter.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.22 |
prvtSaaY1731PmTestPriorityDefines the priority of the packets sent by the SAA Y1731 Pm test (priority to count user traffic).rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.23 |
prvtSaaY1731PmTestRowStatusThe status of the row. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.1.1.1.24 |
prvtSaaY1731PmTestCCMAPSCountDetermines whether to include proactive OAM frames for ETH-CC and ETH-APS in loss measurement counters or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.1.1.1.25 |
prvtSaaY1731PmTestLossMeasurementTypeIf set to 1 Synthetic Loss Measurement will be used for frame-loss calculations.If set 0 user packets will be used for frame-loss calculationsrw Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.1.1.26 |
prvtSaaY1731PmTestSLMTransmitIf set true the device is capable of sending SLM packets and frame-loss calculations. This must be used only when loss measurement type is SLMrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.1.1.1.27 |
prvtSaaY1731PmTestTestIdSpecify the unique test id used in Y1731 SLM. 0 means not set.It is mandatory for the Y1731 SLM testrw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.28 |
prvtSaaY1731PmTestDropEligibleDrop Eligible flag for S-VLAN used for the Y1731 SLM test.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.1.1.1.29 |
prvtSaaY1731PmTestDataSizePacket sizes for Y1731 SLM testrw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.1.1.30 |
prvtSaaY1731PmTestCountAllPrioritiesMeasure for all priorities.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.1.1.1.31 |
prvtSaaRFC2544ThroughputTestTableThis table holds the configuration for a SAA RFC2544 test SEQUENCE OF PrvtSaaRFC2544ThroughputTestEntry .1.3.6.1.4.1.738.1.5.130.1.1.2 |
prvtSaaRFC2544ThroughputTestEntryNONE PrvtSaaRFC2544ThroughputTestEntry .1.3.6.1.4.1.738.1.5.130.1.1.2.1 |
prvtSaaRFC2544ThroughputTestOwnerThis string is used to describe the owner of the RFC2544 SAA test. SnmpAdminString .1.3.6.1.4.1.738.1.5.130.1.1.2.1.1 |
prvtSaaRFC2544ThroughputTestNameThis string is used to describe the test name for the RFC2544 SAA test. It is also used as a test identifier. SnmpAdminString .1.3.6.1.4.1.738.1.5.130.1.1.2.1.2 |
prvtSaaRFC2544ThroughputTestTypeSAA RFC2544 Throughput test typerw Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.2.1.3 |
prvtSaaRFC2544ThroughputTestExecStatusSAA RFC2544 Throughput test execution status.ro Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.2.1.4 |
prvtSaaRFC2544ThroughputTestSourceTypeSAA RFC2544 Throughput test source type.ro Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.2.1.5 |
prvtSaaRFC2544ThroughputTestSourceString that holds either the MAC or the MEP ID. MAC should be in the format AA:BB:CC:DD:EE:FF MEP shold be in the format DOMAIN:MA:MEP that represent the values corresponding to dot1agCfmMdIndex, dot1agCfmMaIndex and dot1agCfmMepIdentifier from IEEE8021-CFM-MIB. e.g.: MAC: 00:A0:12:5C:12:C0 MEP: 1:1:2rw OCTET STRING .1.3.6.1.4.1.738.1.5.130.1.1.2.1.6 |
prvtSaaRFC2544ThroughputTestTargetTypeSAA RFC2544 Throughput test target type.ro Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.2.1.7 |
prvtSaaRFC2544ThroughputTestTargetString that holds either the MAC or the MEP ID. MAC should be in the format AA:BB:CC:DD:EE:FF MEP shold be in the format DOMAIN:MA:MEP that represent the values corresponding to dot1agCfmMdIndex, dot1agCfmMaIndex and dot1agCfmMepIdentifier from IEEE8021-CFM-MIB. e.g.: MAC: 00:A0:12:5C:12:C0 MEP: 1:1:2rw OCTET STRING .1.3.6.1.4.1.738.1.5.130.1.1.2.1.8 |
prvtSaaRFC2544ThroughputTestTimeoutSAA RFC2544 Throughput test timeout, in 0.1 of a second incrementsrw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.2.1.9 |
prvtSaaRFC2544ThroughputTestCIRSAA RFC2544 Throughput Committed Information Rate (CIR) value.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.2.1.10 |
prvtSaaRFC2544ThroughputTestCBSSAA RFC2544 Throughput Committed Burst Size (CBS) value.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.2.1.11 |
prvtSaaRFC2544ThroughputTestBurstPercentagePart of CIR to use for bursts(CBS).rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.2.1.12 |
prvtSaaRFC2544ThroughputTestDurationThe SAA RFC2544 Throughput test duration, in seconds.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.2.1.13 |
prvtSaaRFC2544ThroughputTestMaxFramelossThe maximum frameloss to declare a successful SAA RFC2544 Throughput test in 0.001 of a percent.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.2.1.14 |
prvtSaaRFC2544ThroughputTestCVLAN0C-VLAN ID for the SAA RFC2544 Throughput test.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.2.1.15 |
prvtSaaRFC2544ThroughputTestCVLAN0PriorityVPT for C-VLAN0 for the SAA RFC2544 Throughput test.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.2.1.16 |
prvtSaaRFC2544ThroughputTestCVLAN0DropEligibleDrop Eligible flag for C-VLAN0 for the SAA RFC2544 Throughput test.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.1.2.1.17 |
prvtSaaRFC2544ThroughputTestSVLANS-VLAN ID for the SAA RFC2544 Throughput test.ro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.2.1.18 |
prvtSaaRFC2544ThroughputTestSVLANPriorityVPT for S-VLAN0 for the SAA RFC2544 Throughput test.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.2.1.19 |
prvtSaaRFC2544ThroughputTestSVLANDropEligibleDrop Eligible flag for S-VLAN0 for the SAA RFC2544 Throughput test.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.1.2.1.20 |
prvtSaaRFC2544ThroughputTestPDUSizeBitmask with predefined packet sizes for SAA RFC2544 Throughput test: 64, 128, 256, 512, 1024, 1280, 1518, 1530, 2000, 9000 (LSB set=64...10th bit set =9000)rw DisplayString .1.3.6.1.4.1.738.1.5.130.1.1.2.1.21 |
prvtSaaRFC2544ThroughputTestACKTimeoutDefines the timeout for a SAA RFC2544 Throughput test tail to send an ACK MCC.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.2.1.22 |
prvtSaaRFC2544ThroughputTestLoopbackTypeSAA RFC2544 Throughput test loopback type.rw Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.2.1.23 |
prvtSaaRFC2544ThroughputTestPaternTypeSAA RFC2544 Throughput test patern type. Options for it are none, null, null-crc, prbs, prbs-crc.rw Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.2.1.24 |
prvtSaaRFC2544ThroughputTestRowStatusThe status of the row entry. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.1.2.1.25 |
prvtSaaRFC2544ThroughputTestEthertypeSAA RFC2544 Throughput test Ethertype.rw OCTET STRING .1.3.6.1.4.1.738.1.5.130.1.1.2.1.26 |
prvtSaaY1731LoopbackTestTableThis table holds the configuration for a SAA Y1731 Loopback test. It describes the FPGA configuration. SEQUENCE OF PrvtSaaY1731LoopbackTestEntry .1.3.6.1.4.1.738.1.5.130.1.1.3 |
prvtSaaY1731LoopbackTestEntryNONE PrvtSaaY1731LoopbackTestEntry .1.3.6.1.4.1.738.1.5.130.1.1.3.1 |
prvtSaaY1731LoopbackTestEncapTypeSAA Y1731 Loopback test encapsulation type. It can be either test over VLAN or test over Service. The value 1 is the default value representing that neither type is set. Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.3.1.1 |
prvtSaaY1731LoopbackTestEncapValueThe value of the defined SAA Y1731 Lopback test encapsulation. It should be either the Vlan ID or the Service ID, depending on the type set in prvtSaaY1731LoopbackTestEncapType. Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.3.1.2 |
prvtSaaY1731LoopbackTestUserPortFor SAA Y1731 Loopback test, this leaf is used only in case the encapsulation is VLAN type and it determines the port on which the user is connected.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.3.1.3 |
prvtSaaY1731LoopbackTestUplinkPortFor SAA Y1731 Loopback test, this leaf is used only in case the encapsulation is VLAN type and it determines the port that the SAA test devices are connected through.rw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.1.3.1.4 |
prvtSaaY1731LoopbackTestTypeSAA Y1731 Loopback test type. Specifies the test being perfoerrw Enumeration .1.3.6.1.4.1.738.1.5.130.1.1.3.1.5 |
prvtSaaY1731LoopbackTestRowStatusThe status of the row entry. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.1.3.1.6 |
prvtSaaY1731LoopbackTestCCMAPSCountDetermines whether to include proactive OAM frames for ETH-CC and ETH-APS in loss measurement counters or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.1.3.1.7 |
prvtSaaY1731LoopbackTestCountAllPrioritiesDetermines whether to count all packets ignoring the priority.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.1.3.1.8 |
prvtSaaTestResult OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.130.1.2 |
prvtSaaY1731TestResultTableThis table contains SAA results for Y1731 tests. SEQUENCE OF PrvtSaaY1731TestResultEntry .1.3.6.1.4.1.738.1.5.130.1.2.1 |
prvtSaaY1731TestResultEntryNONE PrvtSaaY1731TestResultEntry .1.3.6.1.4.1.738.1.5.130.1.2.1.1 |
prvtSaaY1731TestResultIndexSAA Y1731 test results table index Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.1 |
prvtSaaY1731TestResultDelayNENear end delay result in 0.01 of a microsecondro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.2 |
prvtSaaY1731TestResultDelayFEFar end delay result in 0.01 of a microsecondro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.3 |
prvtSaaY1731TestResultJitterNENear end jitter result in 0.01 of a microsecondro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.4 |
prvtSaaY1731TestResultJitterFEFar end jitter result in 0.01 of a microsecondro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.5 |
prvtSaaY1731TestResultFrameLossNENear end frame-loss result in 0.0000001 of a percentro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.6 |
prvtSaaY1731TestResultFrameLossFEFar end frame-loss result in 0.0000001 of a percentro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.7 |
prvtSaaY1731TestResultFramesSentNENear end sent framesro Counter32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.8 |
prvtSaaY1731TestResultFramesSentFEFar end sent framesro Counter32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.9 |
prvtSaaY1731TestResultFramesRcvdNENear end received framesro Counter32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.10 |
prvtSaaY1731TestResultFramesRcvdFEFar end received framesro Counter32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.11 |
prvtSaaY1731TestResultPacketsSentThe test packets sent between devicesro Counter32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.12 |
prvtSaaY1731TestResultNoTimeoutsNumber of timeouts for the SAA Y1731 Pm testro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.13 |
prvtSaaY1731TestResultNoErrorsNumber of errors for the SAA Y1731 Pm testro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.14 |
prvtSaaY1731TestResultCompletionTimeCompletion time in seconds for the SAA Y1731 PM test.ro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.1.1.15 |
prvtSaaRFC2544TestResultTableThis table contains SAA results for RFC2544 tests. SEQUENCE OF PrvtSaaRFC2544TestResultEntry .1.3.6.1.4.1.738.1.5.130.1.2.2 |
prvtSaaRFC2544TestResultEntryNONE PrvtSaaRFC2544TestResultEntry .1.3.6.1.4.1.738.1.5.130.1.2.2.1 |
prvtSaaRFC2544TestResultIndexSAA RFC2544 Throughput test results table index. Index will take values 1 to 9, each value representing a frame size from this list: 64, 128, 256, 512, 1024, 1280, 1518, 2000, 9000. The leaf prvtSaaRFC2544TestResultFrameSize will present this value in a more user-friendly way. Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.2.1.1 |
prvtSaaRFC2544TestResultFrameSizeFrame size of the SAA RFC2544 test. Possible values are: 64, 128, 256, 512, 1024, 1280, 1518, 2000, 9000ro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.2.1.2 |
prvtSaaRFC2544TestResultFrameLossFrame loss of the SAA RFC2544 test measured in 0.001 of a percentro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.2.1.3 |
prvtSaaRFC2544TestResultThroughputThroughput of the SAA RFC2544 test measured in Kbpsro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.2.1.4 |
prvtSaaRFC2544TestResultNetThroughputThe actual throughput of the SAA RFC2544 test containing only user data. It is measured in Kbps.ro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.2.1.5 |
prvtSaaRFC2544TestResultStatusStatus of the SAA RFC2544 testro Enumeration .1.3.6.1.4.1.738.1.5.130.1.2.2.1.6 |
prvtSaaRFC2544TestResultDelayMinimumMinimum delay for SAA RFC2544 test measured in 1/100th of a microsecond.ro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.2.1.7 |
prvtSaaRFC2544TestResultDelayAverageAverage delay for SAA RFC2544 test measured in 1/100th of a microsecond.ro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.2.1.8 |
prvtSaaRFC2544TestResultDelayMaximumMaximum delay for SAA RFC2544 test measured in 1/100th of a microsecond.ro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.2.2.1.9 |
prvtSaaProfiles OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.130.1.3 |
prvtSaaProfileTableTable contains SAA thresholds. SEQUENCE OF PrvtSaaProfileEntry .1.3.6.1.4.1.738.1.5.130.1.3.1 |
prvtSaaProfileEntryNONE PrvtSaaProfileEntry .1.3.6.1.4.1.738.1.5.130.1.3.1.1 |
prvtSaaProfileIndexSAA profile table index. Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.3.1.1.1 |
prvtSaaProfileDelayNENear end delay in microsecondsrw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.3.1.1.2 |
prvtSaaProfileDelayFEFar end delay in microsecondsrw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.3.1.1.3 |
prvtSaaProfileJitterNENear end jitter in microsecondsrw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.3.1.1.4 |
prvtSaaProfileJitterFEFar end jitter in microsecondsrw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.3.1.1.5 |
prvtSaaProfileFrameLossNENear end frame-loss measured in 0.001 of percentrw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.3.1.1.6 |
prvtSaaProfileFrameLossFEFar end frame-loss measured in 0.001 of percentrw Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.3.1.1.7 |
prvtSaaProfileRowStatusCreation/delete/edit of the SAA profile.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.3.1.1.8 |
prvtSaaProfileNameName assigned to the SAA profile.rw OCTET STRING .1.3.6.1.4.1.738.1.5.130.1.3.1.1.9 |
prvtTwampObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.130.1.4 |
prvtTwampTest OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.130.1.4.1 |
prvtTwampTestTableTable contains TWAMP tests. SEQUENCE OF PrvtTwampTestEntry .1.3.6.1.4.1.738.1.5.130.1.4.1.1 |
prvtTwampTestEntryEntry in prvtTwampTestTable PrvtTwampTestEntry .1.3.6.1.4.1.738.1.5.130.1.4.1.1.1 |
prvtTwampTestNameTWAMP test name. PrvtTwampTestNameType .1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.1 |
prvtTwampTestRowStatusCreate/delete entry in prvtTwampTestTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.2 |
prvtTwampTestServerTWAMP test server ip-address.rw IpAddress .1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.3 |
prvtTwampTestSessionsCountThe number of parallel test sessions.rw Integer32 .1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.4 |
prvtTwampTestPacketsThe number of packets in parallel sessions.rw Integer32 .1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.5 |
prvtTwampTestTimeoutThe timout interval of test packets (in milliseconds).rw Integer32 .1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.6 |
prvtTwampTestDelayThe delay interval between test packets (in milliseconds)rw Integer32 .1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.7 |
prvtTwampTestExecuteNowWhen this object is set to '1', command self-test execute-now. When this object is set to '2' the self-test is stopped. Setting the variable to '0' results in an 'inconsistentValue' error. Setting it to any other value has no effect. When this object is read, the value '0' is returned.rw Integer32 .1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.8 |
prvtTwampServer OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.130.1.4.2 |
prvtTwampServerInnactivityThe server innactivity timeout interval of the TWAMP server (in seconds).rw Integer32 .1.3.6.1.4.1.738.1.5.130.1.4.2.1 |
prvtTwampServerSessionInnactivityThe session innactivity timeout interval of the TWAMP server (in seconds).rw Integer32 .1.3.6.1.4.1.738.1.5.130.1.4.2.2 |
prvtTwampServerMaxSessionsThe maximum number of controll sessions supported by the TWAMP server.rw Integer32 .1.3.6.1.4.1.738.1.5.130.1.4.2.3 |
prvtTwampServerMaxParallelSessionsThe maximum number of parallel test sessions for each client supperted by the TWAMP server.rw Integer32 .1.3.6.1.4.1.738.1.5.130.1.4.2.4 |
prvtTwampServerShutdownThe administrative state of the TWAMP server.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.4.2.5 |
prvtTwampClientTableTable contains the allowed clients for the TWAMP server. SEQUENCE OF PrvtTwampClientEntry .1.3.6.1.4.1.738.1.5.130.1.4.2.6 |
prvtTwampClientEntryEntry in twampClientTable. PrvtTwampClientEntry .1.3.6.1.4.1.738.1.5.130.1.4.2.6.1 |
prvtTwampClientIpThe ip-address of the client. IpAddress .1.3.6.1.4.1.738.1.5.130.1.4.2.6.1.1 |
prvtTwampClientRowStatuscreate/delete entry in prvtTwampClientTablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.130.1.4.2.6.1.2 |
prvtTwampServerControlSessionsThe number of current control sessions established on the TWAMP server.ro Integer32 .1.3.6.1.4.1.738.1.5.130.1.4.2.7 |
prvtTwampServerTestSessionsThe number of current test sessions established on the TWAMP server.ro Integer32 .1.3.6.1.4.1.738.1.5.130.1.4.2.8 |
prvtTwampTestResult OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.130.1.4.3 |
prvtTwampTestResultTableTable contains statistics of the executed TWAMP tests. SEQUENCE OF PrvtTwampTestResultEntry .1.3.6.1.4.1.738.1.5.130.1.4.3.1 |
prvtTwampTestResultEntryEntry in twampTestResultTable PrvtTwampTestResultEntry .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1 |
prvtTwampTestIdThe internal ID of the TWAMP test instance.ro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.1 |
prvtTwampTestResultNameTWAMP test name.ro PrvtTwampTestNameType .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.2 |
prvtTwampTestStartTimeThe start time of the TWAMP test instance.ro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.3 |
prvtTwampTestServerAddressThe server ip-address of the TWAMP test instance.ro IpAddress .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.4 |
prvtTwampTestSessionsThe number of parallel test sessions of the TWAMP test instance.ro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.5 |
prvtTwampTestStateThe status of the executed TWAMP test instance.ro Enumeration .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.6 |
prvtTwampTestRttThe average round-trip time of the TWAMP test sample.ro Counter64 .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.7 |
prvtTwampTestMinRttThe minimum round-trip time of the TWAMP test sample.ro Counter64 .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.8 |
prvtTwampTestMaxRttThe maximum round-trip time of the TWAMP test sample.ro Counter64 .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.9 |
prvtTwampTestPcktSentThe number of test packets sent for the TWAMP test instance.ro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.10 |
prvtTwampTestPcktLostThe number of lost test packets.ro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.11 |
prvtTwampTestPcktDropThe number of dropped test packets.ro Unsigned32 .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.12 |
prvtTwampTestVariationThe maximum module variation of the TWAMP test samplero Counter64 .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.13 |
prvtTwampTestVariationLowThe percent of singletons whose variation is less than 10% of the negated maximum module variation of the sample.ro PrvtTwampDecimalPercent .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.14 |
prvtTwampTestVariationMiddleThe percent of singletons whose variation by module is less than 10% of the maximum module variation of the sample.ro PrvtTwampDecimalPercent .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.15 |
prvtTwampTestVariationHighThe percent of singletons whose variation is greater than 10% of the maximum module variation of the sample.ro PrvtTwampDecimalPercent .1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.16 |
prvtSaaConformance OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.130.2 |
prvtSaaCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.130.2.1 |
prvtSaaComplianceThe compliance statement for support of the SAA MIB module. Unknown .1.3.6.1.4.1.738.1.5.130.2.1.1 |
prvtSaaGroups OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.130.2.2 |
prvtSaaY1731TestGroupObjects for the SAA Y1731 test group. Unknown .1.3.6.1.4.1.738.1.5.130.2.2.1 |
prvtSaaRFC2544TestGroupObjects for the SAA RFC2544 test group. Unknown .1.3.6.1.4.1.738.1.5.130.2.2.2 |
prvtSaaY1731TestResultsGroupObjects for the SAA Y1731 test results group. Unknown .1.3.6.1.4.1.738.1.5.130.2.2.3 |
prvtSaaRFC2544TestResultsGroupObjects for the SAA RFC2544 test results group. Unknown .1.3.6.1.4.1.738.1.5.130.2.2.4 |
prvtSaaProfilesGroupObjects for the SAA profiles group. Unknown .1.3.6.1.4.1.738.1.5.130.2.2.5 |
prvtSaaNotificationsGroupObjects for the Notifications group. Unknown .1.3.6.1.4.1.738.1.5.130.2.2.6 |
prvtSaaY1731LoopbackTestGroupObjects for the SAA Y1731 Loopback test group. Unknown .1.3.6.1.4.1.738.1.5.130.2.2.7 |