PRVT-RESILIENT-LINK-MIB
Imported Objects
Objects
20 total| Object Name |
|---|
prvtResilientLinkMibThe Resilient Link MIB module for managing switch or ipSwitch resilient link MODULE-IDENTITY .1.3.6.1.4.1.738.1.5.102 |
prvtResilientLinkNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.102.0 |
resilientLinkStatusChangeThe resilientLinkStatusChange trap indicates that the sending agent monitor detected a change in the status of the resilient link, identified by resilientLinkIndex. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.102.0.1 |
resilientLinkConfig OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.102.1 |
resilientLinkConfigTableThis table contains the resilient link configuration. SEQUENCE OF ResilientLinkConfigEntry .1.3.6.1.4.1.738.1.5.102.1.1 |
resilientLinkConfigEntryresilientLinkIndex ResilientLinkConfigEntry .1.3.6.1.4.1.738.1.5.102.1.1.1 |
resilientLinkIndexThis object identifies the resilient linkro INTEGER .1.3.6.1.4.1.738.1.5.102.1.1.1.1 |
resilientLinkEnableThis object enables or disables the resilient linkrw Enumeration .1.3.6.1.4.1.738.1.5.102.1.1.1.2 |
resilientLinkPort1ifIndexThis object identifies the first port belonging to this resilient link; zero means no port is selectedrw INTEGER .1.3.6.1.4.1.738.1.5.102.1.1.1.3 |
resilientLinkPort2ifIndexThis object identifies the second port belonging to this resilient link; zero means no port is selectedrw INTEGER .1.3.6.1.4.1.738.1.5.102.1.1.1.4 |
resilientLinkPreferredPortThis object identifies the preferred port (1 or 2) in this resilient link; zero means no port is preferredrw INTEGER .1.3.6.1.4.1.738.1.5.102.1.1.1.5 |
resilientLinkActivePortThis object identifies the active port (1 or 2) in this resilient link. Only ports with link up can be configured as active ports.rw INTEGER .1.3.6.1.4.1.738.1.5.102.1.1.1.6 |
resilientLinkStatus OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.102.2 |
resilientLinkStatusTableThis table contains the resilient link status. SEQUENCE OF ResilientLinkStatusEntry .1.3.6.1.4.1.738.1.5.102.2.2 |
resilientLinkStatusEntryresilientLinkIndex ResilientLinkStatusEntry .1.3.6.1.4.1.738.1.5.102.2.2.1 |
resilientLinkConnectedPortThis object shows the connected ports in the resilient linkro Enumeration .1.3.6.1.4.1.738.1.5.102.2.2.1.1 |
resilientLinkCurrentActivePortThis object identifies the active port (1 or 2) in this resilient link. Only ports with link up can be configured as active ports.ro Enumeration .1.3.6.1.4.1.738.1.5.102.2.2.1.2 |
prvtResilientLinkConformance OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.102.3 |
prvtResilientLinkMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.102.3.2 |
resilientLinkNotificationGroupPrivate Notification Group. Unknown .1.3.6.1.4.1.738.1.5.102.3.2.3 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →SNMP MIB module
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
SNMP MIB module
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.