PRVT-REDUNDANCY-MIB
The PRVT-REDUNDANCY-MIB monitors the operational status and failover states of hardware redundancy components, such as power supplies, fans, and control plane modules, within Privileged or proprietary network infrastructure. It provides specific metrics for tracking redundancy group health, active/standby transitions, and protection mechanism availability to ensure continuous system operation.
Imported Objects
Objects
12 total| Object Name |
|---|
prvtRedundancyMIBMonitoring of components redundancy protection MODULE-IDENTITY .1.3.6.1.4.1.738.1.111.5 |
prvtRedundancyNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.111.5.0 |
licStatusLIC prvtRedundancyChassisEntryStatus has been changed. Card slotId is present as a key. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.111.5.0.1 |
switchoverSwitchover has happend - link between Active and Standby HUB is broken. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.111.5.0.2 |
redundancyStatusChassis redundancy-status NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.111.5.0.3 |
prvtRedundancyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.111.5.1 |
prvtRedundancyChassisTableA list of slots in the chassis SEQUENCE OF PrvtRedundancyChassisEntry .1.3.6.1.4.1.738.1.111.5.1.1 |
prvtRedundancyChassisEntryEntry in prvtRedundancyChassisTable PrvtRedundancyChassisEntry .1.3.6.1.4.1.738.1.111.5.1.1.1 |
prvtRedundancyChassisSlotIdIndex in the table. Unsigned32 .1.3.6.1.4.1.738.1.111.5.1.1.1.1 |
prvtRedundancyChassisLICTypeLIC typero Enumeration .1.3.6.1.4.1.738.1.111.5.1.1.1.2 |
prvtRedundancyChassisStatusChassis statusro Enumeration .1.3.6.1.4.1.738.1.111.5.1.1.1.3 |
prvtRedundancyChassisEntryStatusChassis Entry statusro Enumeration .1.3.6.1.4.1.738.1.111.5.1.1.1.4 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →SNMP MIB module
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
SNMP MIB module
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.