PRVT-OPR-LED-MANAGEMENT-MIB
The PRVT-OPR-LED-MANAGEMENT-MIB enables SNMP-based remote control of the Operational (OPR) LED status indicators on supported network switches. This module facilitates physical device status verification and troubleshooting by allowing administrators to programmatically toggle or query the LED state without physical console access.
Imported Objects
Objects
5 total| Object Name |
|---|
prvtOprLedMgmtMIBInitial version. This MIB will provied a way to control the status of the state OPR LED for certain switches MODULE-IDENTITY .1.3.6.1.4.1.738.1.5.110 |
prvtOprLedMgmtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.110.1 |
prvtOprLedSatusAll possible led states. States red-stable and red-blinking can not be set. States amber-stable and amber-blinking green-blinking can be set only when the current state is green-stable. The object has read-write access and its default value is green-stablerw LedValues .1.3.6.1.4.1.738.1.5.110.1.1 |
prvtOprLedMgmtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.110.2 |
prvtOprLedMgmtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.110.3 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →SNMP MIB module
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
SNMP MIB module
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.