PRVT-OEM1-PARAMS-MIB
The PRVT-OEM1-PARAMS-MIB module enables SNMP-based retrieval of proprietary device parameters for vendor-specific hardware, facilitating the monitoring of internal configuration states and operational metrics not covered by standard MIBs. This module serves as a vendor extension to expose specific, non-standard telemetry data points required for granular device management and troubleshooting.
Imported Objects
Objects
20 total| Object Name |
|---|
prvtOem1ParamsMIBInitial version. This MIB will provied a way to read specific device parameters MODULE-IDENTITY .1.3.6.1.4.1.738.1.5.2110 |
prvtOem1ParamsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.2110.1 |
prvtSerialNumberDevice serial numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.1 |
prvtAssemblyNumberDevice assembly numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.2 |
prvtHardwareRevisionDevice hardware revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.3 |
prvtSwitchRevisionSwitch revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.4 |
prvtSwitchVersionSwitch versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.5 |
prvtSwitchEditionSwitch editionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.6 |
prvtSwitchRepairSwitch repairro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.7 |
prvtHardwareAddressSwitch hardware addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.8 |
prvtCabinetRowCabinet row locationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.9 |
prvtCabinetColumnCabinet column locationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.10 |
prvtChassisVerticalDeviationChassis vertical deviation locationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.11 |
prvtChassisHorizontalDeviatioinChassis horizontal deviation locationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.12 |
prvtCabinetHMSNumberCabinet HMS numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.13 |
prvtSubrackHMSNumberSubrack HMS numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.2110.1.14 |
prvtModelNumberModel numberro INTEGER .1.3.6.1.4.1.738.1.5.2110.1.15 |
prvtPluginUIDPlugin UIDro INTEGER .1.3.6.1.4.1.738.1.5.2110.1.16 |
prvtOem1ParamsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.2110.2 |
prvtOem1ParamsConformance OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.2110.3 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →SNMP MIB module
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
SNMP MIB module
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.