PRVT-MPLS-IF-MIB
This module includes configuration parameters for MPLS and RSVP interface specific parameters.
Main OID:
prvtMPLSIfMib.1.3.6.1.4.1.738.1.6.5.6
40
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
40 total| Object Name |
|---|
prvtMPLSIfMibThis module includes configuration parameters for MPLS and RSVP interface specific parameters. MODULE-IDENTITY .1.3.6.1.4.1.738.1.6.5.6 |
prvtMPLSIfaceObjs OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.6.5.6.1 |
prvtMplsIfaceTableThis table contains object for configuring MPLS and LDP interface specific parameters. SEQUENCE OF PrvtMplsIfaceEntry .1.3.6.1.4.1.738.1.6.5.6.1.1 |
prvtMplsIfaceEntryThe MPLS/LDP configuration of an IP interface. PrvtMplsIfaceEntry .1.3.6.1.4.1.738.1.6.5.6.1.1.1 |
ifaceMplsEnableEnable or disable MPLS on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.6.5.6.1.1.1.1 |
ifaceMplsPHPEnableEnable or disable Penultimate Hop Popping on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.6.5.6.1.1.1.2 |
ifaceMplsIngressLblRangeLowThis is the lower border of the Ingress Lable Range for this interface.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.1.1.3 |
ifaceMplsIngressLblRangeHighThis is the higher border of the Ingress Lable Range for this interface.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.1.1.4 |
ifaceMplsEgressLblRangeLowThis is the lower border of the Egress Lable Range for this interface.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.1.1.5 |
ifaceMplsEgressLblRangeHighThis is the higher border of the Egress Lable Range for this interface.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.1.1.6 |
ifaceMplsLdpHelloHoldTimerLDP Hello Hold Time.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.1.1.7 |
ifaceMplsLdpKeepaliveHoldTimerLDP Hello Keep-alive Time.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.1.1.8 |
ifaceMplsLdpUseGlobalLabelSpaceDefault value is true and correct value is true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.6.5.6.1.1.1.9 |
prvtRsvpIfaceTableThis table contains object for configuring RSVP interface specific parameters. SEQUENCE OF PrvtRsvpIfaceEntry .1.3.6.1.4.1.738.1.6.5.6.1.2 |
prvtRsvpIfaceEntryThe MPLS/LDP configuration of an IP interface. PrvtRsvpIfaceEntry .1.3.6.1.4.1.738.1.6.5.6.1.2.1 |
ifaceRsvpRefreshIntervalThe RSVP value, R, which is used to set the average interval between refresh path and resv messages.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.2.1.1 |
ifaceRsvpRefreshMultipleThe RSVP value, K, which is the number of unresponded Path or Resv refresh attempts which must be made, spaced by the refresh interval before the state is deemed to have timed out.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.2.1.2 |
ifaceRsvpSlewNumeratorThe numerator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.2.1.3 |
ifaceRsvpSlewDenomThe denominator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.2.1.4 |
ifaceRsvpBlockadeMultipleThe RSVP value, Kb, which is the number of refresh timeout periods after which blockade state is deleted.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.2.1.5 |
ifaceRsvpNotifyRRDecayThe percentage increase in the rapid retransmission interval for each consecutive unacknowledged RSVP Notify message. A value of 0 indicates a constant retransmission rate.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.2.1.6 |
ifaceRsvpNotifyRRIntervalThe interval in milliseconds before a Notify message is first resent if no acknowledgement is received.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.2.1.7 |
ifaceRsvpNotifyRRLimitThe maximum number of times a Notify message is resent if no acknowledgement is received.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.2.1.8 |
ifaceRsvpHelloIntervalThe interval between sending consecutive Hello messages.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.2.1.9 |
ifaceRsvpHelloDecayPercentage increase of hello interval after each Hello message sent when the hello session with the neighbor has timed out.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.2.1.10 |
ifaceRsvpHelloToleranceThe number of hello periods which may pass without receiving a successful Hello message from a partner before the Hello session times out.rw Unsigned32 .1.3.6.1.4.1.738.1.6.5.6.1.2.1.11 |
ifaceRsvpHelloPersistThe number of hello periods which may pass after the Hello session times out before Hello messages cease.rw Unsigned32 .1.3.6.1.4.1.738.1.6.5.6.1.2.1.12 |
ifaceRsvpHelloTTLThe Time To Live that will be set in the IP header of all Hello packets sent to the neighbor associated with this interface.rw Integer32 .1.3.6.1.4.1.738.1.6.5.6.1.2.1.13 |
prvtMPLSRouteObjs OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.6.5.6.2 |
prvtMplsRouteProtocolTableThis table contains for configuring the egress and ingress routes for LDP label packets. It supports all CLI route types - bgp, isis, ospf, rip, static, kernel and connected. SEQUENCE OF PrvtMplsRouteProtocolEntry .1.3.6.1.4.1.738.1.6.5.6.2.1 |
prvtMplsRouteProtocolEntryAn entry in the table represents the configuration of a particular route type for ingress or egress. PrvtMplsRouteProtocolEntry .1.3.6.1.4.1.738.1.6.5.6.2.1.1 |
prvtMplsRouteDirectionThe direction of the route that will be used to receive or send LDP packets.ro Enumeration .1.3.6.1.4.1.738.1.6.5.6.2.1.1.1 |
prvtMplsRouteTypeThe type of the route which will be used to send or receive LDP packets.ro Enumeration .1.3.6.1.4.1.738.1.6.5.6.2.1.1.2 |
prvtMplsRouteRowStatusThis object is used to create an entry in the table. Only createAndGo(4) should be used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.6.5.6.2.1.1.3 |
prvtMplsRouteAddressTableThis table contains for configuring the egress and ingress routes for LDP label packets. It supports all CLI route types - bgp, isis, ospf, rip, static, kernel and connected. SEQUENCE OF PrvtMplsRouteAddressEntry .1.3.6.1.4.1.738.1.6.5.6.2.2 |
prvtMplsRouteAddressEntryAn entry in the table represents the configuration of a particular route type for ingress or egress. PrvtMplsRouteAddressEntry .1.3.6.1.4.1.738.1.6.5.6.2.2.1 |
prvtMplsAddressDirectionThe direction of the route that will be used to receive or send LDP packets.ro Enumeration .1.3.6.1.4.1.738.1.6.5.6.2.2.1.1 |
prvtMplsAddressIPAddrThe IP address of the route that will be used to send or receive LDP packets.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.738.1.6.5.6.2.2.1.2 |
prvtMplsAddressMaskThe mask for the IP address of the route that will be used to send or receive LDP packets.ro Integer32 .1.3.6.1.4.1.738.1.6.5.6.2.2.1.3 |
prvtMplsAddressRowStatusThis object is used to create an entry in the table. Only createAndGo(4) should be used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.6.5.6.2.2.1.4 |