PRVT-LMM-MIB
The PRVT-LMM-MIB module enables the monitoring and configuration of laser parameters, specifically optical power levels and laser bias currents, on Privnet optical transport hardware. This MIB facilitates the tracking of laser health metrics to detect degradation or failure in fiber optic transmission links.
Imported Objects
Objects
40 total| Object Name |
|---|
prvtLmmMIBInitial version. This MIB will configure laser monitoring MODULE-IDENTITY .1.3.6.1.4.1.738.1.5.172 |
prvtLmmNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.172.0 |
prvtLmmTemperatureThresholdCrossedThe prvtLmmTemperatureThresholdCrossed shall be generated when prvtLmmInterfaceTempValue rises above prvtLmmInterfaceTempThresholdHi or falls below prvtLmmInterfaceTempThresholdLo. Also the notification shall be generated when prvtLmmInterfaceTempValue returns to the normal range between prvtLmmInterfaceTempThresholdHi and prvtLmmInterfaceTempThresholdLo. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.172.0.1 |
prvtLmmTxPowerThresholdCrossedThe prvtLmmTxPowerThresholdCrossed shall be generated when prvtLmmInterfaceTxPowerValue rises above prvtLmmInterfaceTxPowerThresholdTxHi or falls below prvtLmmInterfaceTxPowerThresholdTxLo. Also the notification shall be generated when prvtLmmInterfaceTxPowerValue returns to the normal range between prvtLmmInterfaceTxPowerThresholdTxHi and prvtLmmInterfaceTxPowerThresholdTxLo. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.172.0.2 |
prvtLmmRxPowerThresholdCrossedThe prvtLmmRxPowerThresholdCrossed shall be generated when prvtLmmInterfaceRxPowerValue rises above prvtLmmInterfaceRxPowerThresholdRxHi or falls below prvtLmmInterfaceRxPowerThresholdRxLo. Also the notification shall be generated when prvtLmmInterfaceRxPowerValue returns to the normal range between prvtLmmInterfaceRxPowerThresholdRxHi and prvtLmmInterfaceRxPowerThresholdRxLo. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.172.0.3 |
prvtLmmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.172.1 |
prvtLmmShutdownEnable/disable laser monitoringrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.172.1.1 |
prvtLmmDebugEnable/Disable laser monitoringrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.172.1.2 |
prvtLmmPeriodSpecify the monitoring interval (sec).rw Integer32 .1.3.6.1.4.1.738.1.5.172.1.3 |
prvtLmmTrapEnable/Disable sending SNMP traps when thresholds are crossedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.172.1.4 |
prvtLmmLogEnable/Disable alert notification logging when thresholds are crossedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.172.1.5 |
prvtLmmLedEnable/Disable LED-alert notifications when thresholds are crossedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.172.1.6 |
prvtLmmTemperatureHighThresholdSpecify the low threshold value for global temperature (-128 up to 128). prvtLmmTemperatureHighThreshold must be higher than prvtLmmTemperatureLowThresholdrw Integer32 (-128..128) .1.3.6.1.4.1.738.1.5.172.1.7 |
prvtLmmTemperatureLowThresholdSpecify the low threshold value for global temperature (-128 up to 128). prvtLmmTemperatureHighThreshold must be higher than prvtLmmTemperatureLowThresholdrw Integer32 (-128..128) .1.3.6.1.4.1.738.1.5.172.1.8 |
prvtLmmRxPowerLowThresholdSpecify the low threshold value for global RX-power (-40 up to 8) prvtLmmRxPowerHighThreshold must be higher than prvtLmmRxPowerLowThresholdrw Integer32 (-40..8) .1.3.6.1.4.1.738.1.5.172.1.9 |
prvtLmmRxPowerHighThresholdSpecify the high threshold value for global RX-power (-40 up to 8) prvtLmmRxPowerHighThreshold must be higher than prvtLmmRxPowerLowThresholdrw Integer32 (-40..8) .1.3.6.1.4.1.738.1.5.172.1.10 |
prvtLmmTxPowerLowThresholdSpecify the low threshold value for global RX-power (-40 up to 8) prvtLmmTxPowerHighThreshold must be higher than prvtLmmTxPowerLowThresholdrw Integer32 (-40..8) .1.3.6.1.4.1.738.1.5.172.1.11 |
prvtLmmTxPowerHighThresholdSpecify the high threshold value for global RX-power (-40 up to 8) prvtLmmTxPowerHighThreshold must be higher than prvtLmmTxPowerLowThresholdrw Integer32 (-40..8) .1.3.6.1.4.1.738.1.5.172.1.12 |
prvtLmmInterfaceTableLmm configuration per ethernet port SEQUENCE OF PrvtLmmInterfaceEntry .1.3.6.1.4.1.738.1.5.172.1.13 |
prvtLmmInterfaceEntryThe Stack table entry PrvtLmmInterfaceEntry .1.3.6.1.4.1.738.1.5.172.1.13.1 |
prvtLmmInterfaceShutdownEnable/Disable laser monitoring on portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.172.1.13.1.1 |
prvtLmmInterfaceTempLowThresholdSpecify the low threshold value for port temperaturerw Integer32 (-128..128) .1.3.6.1.4.1.738.1.5.172.1.13.1.2 |
prvtLmmInterfaceTempHighThresholdSpecify the high threshold value for port temperature. Value of prvtLmmInterfaceTempHighThreshold must be greater than prvtLmmInterfaceTempLowThresholdrw Integer32 (-128..128) .1.3.6.1.4.1.738.1.5.172.1.13.1.3 |
prvtLmmInterfaceTempValueDisplay laser Temperature current valuero Integer32 .1.3.6.1.4.1.738.1.5.172.1.13.1.4 |
prvtLmmInterfaceTempThresholdLoThe thresholds read from hardware or set by userro Integer32 .1.3.6.1.4.1.738.1.5.172.1.13.1.5 |
prvtLmmInterfaceTempThresholdHiThe thresholds read from hardware or set by userro Integer32 .1.3.6.1.4.1.738.1.5.172.1.13.1.6 |
prvtLmmInterfaceTempTestStateThe state testro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.172.1.13.1.7 |
prvtLmmInterfaceRxPowerLowThresholdSpecify the low threshold value for port RX-power.rw Integer32 (-40..8) .1.3.6.1.4.1.738.1.5.172.1.13.1.8 |
prvtLmmInterfaceRxPowerHighThresholdSpecify the high threshold value for port RX-power. Value of prvtLmmInterfaceRxPowerHighThreshold must be greater than prvtLmmInterfaceRxPowerLowThresholdrw Integer32 (-40..8) .1.3.6.1.4.1.738.1.5.172.1.13.1.9 |
prvtLmmInterfaceRxPowerValueDisplay laser Rx Power current valuero Integer32 .1.3.6.1.4.1.738.1.5.172.1.13.1.10 |
prvtLmmInterfaceRxPowerThresholdRxLoThe thresholds read from hardware or set by userro Integer32 .1.3.6.1.4.1.738.1.5.172.1.13.1.11 |
prvtLmmInterfaceRxPowerThresholdRxHiThe thresholds read from hardware or set by userro Integer32 .1.3.6.1.4.1.738.1.5.172.1.13.1.12 |
prvtLmmInterfaceRxPowerTestStateThe state testro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.172.1.13.1.13 |
prvtLmmInterfaceTxPowerLowThresholdSpecify the low threshold value for port TX-powerrw Integer32 (-40..8) .1.3.6.1.4.1.738.1.5.172.1.13.1.14 |
prvtLmmInterfaceTxPowerHighThresholdSpecify the high threshold value for port TX-power Value of prvtLmmInterfaceTxPowerHighThreshold must be greater than prvtLmmInterfaceTxPowerLowThresholdrw Integer32 (-40..8) .1.3.6.1.4.1.738.1.5.172.1.13.1.15 |
prvtLmmInterfaceTxPowerValueDisplay laser Tx Power current valuero Integer32 .1.3.6.1.4.1.738.1.5.172.1.13.1.16 |
prvtLmmInterfaceTxPowerThresholdTxLoThe thresholds read from hardware or set by userro Integer32 .1.3.6.1.4.1.738.1.5.172.1.13.1.17 |
prvtLmmInterfaceTxPowerThresholdTxHiThe thresholds read from hardware or set by userro Integer32 .1.3.6.1.4.1.738.1.5.172.1.13.1.18 |
prvtLmmInterfaceTxPowerTestStateThe state testro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.172.1.13.1.19 |
prvtLmmInterfaceOperStatusOperational statusro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.172.1.13.1.20 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →SNMP MIB module
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
SNMP MIB module
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.