PRVT-LLDP-MIB
The PRVT-LLDP-MIB module enables the configuration and monitoring of Link Layer Discovery Protocol (LLDP) parameters on network devices, specifically managing LLDP agent states, transmission intervals, and the population of TLV (Type-Length-Value) data structures for neighbor discovery.
Imported Objects
Objects
3 total| Object Name |
|---|
prvtLldpMIBManagement Information Base module for LLDP configuration MODULE-IDENTITY .1.3.6.1.4.1.738.1.5.145 |
prvtLldpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.145.0 |
prvtLldpEnableEnable/disable the LLDP on the devicerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.145.0.1 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →SNMP MIB module
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
SNMP MIB module
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.