PRVT-DRY-CONTACTS-MIB
The PRVT-DRY-CONTACTS-MIB monitors the binary state (open/closed) of external dry-contact alarm inputs on network hardware to facilitate real-time notification of physical security or environmental events. It enables the translation of discrete contact closures into SNMP trap notifications for integration with centralized monitoring systems.
Imported Objects
Objects
15 total| Object Name |
|---|
prvtDryContactsMIBInitial version. This MIB provides external-alarm management and notifications MODULE-IDENTITY .1.3.6.1.4.1.738.1.5.112 |
dryContactsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.112.0 |
stateChangedSend notification when operational status of the input changes NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.5.112.0.1 |
dryContactsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.112.1 |
cfgTableA table containing inputs configuration and statuses SEQUENCE OF CfgEntry .1.3.6.1.4.1.738.1.5.112.1.1 |
cfgEntrycfgEntry CfgEntry .1.3.6.1.4.1.738.1.5.112.1.1.1 |
prvtAlarmIDExternal and internal alarm index uniquely identifies this row. T-Metro 200 ES platform has four dry-contacts sensor inputs. T5C-XG platform has four dry-contact sensor inputs and two dry-contact sensor outputs. An integer with supported range of values 1-6 for T5C-XG and 1-4 for T-Metro 200 ES. Index. Not-accessiblero Integer32 .1.3.6.1.4.1.738.1.5.112.1.1.1.1 |
prvtSensorTypeSensor type. An enumeration with two values: input(1), output(2). T-Metro 200 ES platform has four dry-contacts sensor inputs. T5C-XG platform has four dry-contact sensor inputs and two dry-contact sensor outputs. Read-only.ro Enumeration .1.3.6.1.4.1.738.1.5.112.1.1.1.2 |
prvtNameName of alarm. An OCTET-STRING with max. 16 OCTETS. Default value null string. Read-writerw OCTET STRING .1.3.6.1.4.1.738.1.5.112.1.1.1.3 |
prvtDescriptionAlarm description. An OCTET-STRING with max. 64 OCTETS. Default value null string. Read-writerw OCTET STRING .1.3.6.1.4.1.738.1.5.112.1.1.1.4 |
prvtEnableStatusSenging alarms status. An enumeration with two values: enabled(1), disabled(2). Default value is disabled(2). Read-writerw Enumeration .1.3.6.1.4.1.738.1.5.112.1.1.1.5 |
prvtAlarmStatusAlarm status. An enumeration with two values: no-alarm(1), alarm(2). Default value is no-alarm(1). Read-only.ro Enumeration .1.3.6.1.4.1.738.1.5.112.1.1.1.6 |
prvtAlarmSeverityConfigured alarm severity. An enumeration with 4 values: info(1), minor(2), major(3) and critical(4). Default value is info(1). Read-writerw Enumeration .1.3.6.1.4.1.738.1.5.112.1.1.1.7 |
prvtPolarityConfigured polarity. An enumeration with 2 values: normally-opened(1), normally-closed(2). This object is only for T-Metro 200 ES platform. Default value is normally-opened(1). Read-writerw Enumeration .1.3.6.1.4.1.738.1.5.112.1.1.1.8 |
prvtLastChangeThe value of sysUpTime at the time of the last operational status change. TimeTicks. Read-onlyro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.738.1.5.112.1.1.1.9 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →SNMP MIB module
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
SNMP MIB module
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.