PRVT-ALARM-MIB
The PRVT-ALARM-MIB module exposes SNMP trap and variable bindings for monitoring real-time alarm states and event notifications generated by private network hardware or proprietary software systems. It facilitates the collection of critical fault indicators, such as link failures, hardware degradation, and service disruptions, to enable immediate network fault detection and automated alerting.
Imported Objects
Objects
9 total| Object Name |
|---|
prvtAlarmMIBInformation for current snmp allarms MODULE-IDENTITY .1.3.6.1.4.1.738.1.111.4 |
prvtAlarmMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.111.4.1 |
prvtUpdatedCurrentAlarmCounterLast updated alarm counterro Counter32 .1.3.6.1.4.1.738.1.111.4.1.1 |
prvtAlarmCurrentTableThis table contains current alarms. SEQUENCE OF PrvtAlarmCurrentEntry .1.3.6.1.4.1.738.1.111.4.1.2 |
prvtAlarmCurrentEntryEntry in prvtAlarmCurrentTable containing the info of a current RAISED trap. PrvtAlarmCurrentEntry .1.3.6.1.4.1.738.1.111.4.1.2.1 |
prvtAlarmCurrentCounterA running counter of open alarms, the counter is incremented on every new alarm. It is cleared after reset.ro Counter32 .1.3.6.1.4.1.738.1.111.4.1.2.1.1 |
prvtAlarmCurrentRaisedTimeThe raised time of this alarm. Time in seconds since January 1, 1970 00:00 UTC.ro Unsigned32 .1.3.6.1.4.1.738.1.111.4.1.2.1.2 |
prvtAlarmCurrentSeverityThe current alarm severityro Enumeration .1.3.6.1.4.1.738.1.111.4.1.2.1.3 |
prvtAlarmCurrentDescriptionThe alarm description.ro OCTET STRING .1.3.6.1.4.1.738.1.111.4.1.2.1.4 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →SNMP MIB module
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
SNMP MIB module
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.