Home/Catalog/PROFLINE-SFD-MIB

PROFLINE-SFD-MIB

AI MIB Summary

The PROFLINE-SFD-MIB facilitates the monitoring and management of Siemens PROFIsafe over PROFINET (SFD) safety communication parameters, specifically tracking safety channel status, fault counters, and diagnostic events for PROFIsafe-enabled field devices. This module enables network administrators to verify the integrity of safety-related data transmission and detect communication failures within industrial automation safety loops.

The profline SFD mib
Main OID:
sfd.1.3.6.1.4.1.21222.1.4.1
251
Objects
Active
Status
5
Dependencies

Imported Objects

PROFLINE-MIB
SNMPv2-SMI
SNMPv2-CONF
SNMPv2-TC
SNMPv2-MIB

Objects

251 total
Object Name
sfdThe profline SFD mib
MODULE-IDENTITY
.1.3.6.1.4.1.21222.1.4.1
sfdNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.0
sfdIdentity
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.1
sfdIdnOptionsDisplays the installed options or shows 'None' if there are no installed options.ro
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.1
sfdIdnSerialNumberThe serialnumber of the device.ro
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.2
sfdIdnFirmwareVersionTableTable containing versions for firmware.
SEQUENCE OF SfdIdnFirmwareVersionEntry
.1.3.6.1.4.1.21222.1.4.1.1.3
sfdIdnFirmwareVersionEntryEntrypoint of the firmwareversion table.
SfdIdnFirmwareVersionEntry
.1.3.6.1.4.1.21222.1.4.1.1.3.1
sfdIdnFirmwareIndexIndex to the firmwareversion table.
Integer32
.1.3.6.1.4.1.21222.1.4.1.1.3.1.1
sfdIdnFirmwareTypeType of firmware.ro
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.3.1.2
sfdIdnFirmwareVersionVersion of the firmware.ro
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.3.1.3
sfdIdnDeviceInfo1User definable device information field 1rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.7
sfdIdnDeviceInfo2User definable device information field 2rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.8
sfdIdnDeviceInfo3User definable device information field 3rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.9
sfdIdnDeviceInfo4User definable device information field 4rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.10
sfdIdnDeviceInfo5User definable device information field 5rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.11
sfdIdnDeviceInfo6User definable device information field 6rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.12
sfdIdnDeviceInfo7User definable device information field 7rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.13
sfdIdnDeviceInfo8User definable device information field 8rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.14
sfdIdnDeviceInfo9User definable device information field 9rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.15
sfdIdnDeviceInfo10User definable device information field 10rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.16
sfdIdnDeviceInfo11User definable device information field 11rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.17
sfdIdnDeviceInfo12User definable device information field 12rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.1.18
sfdSettings
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2
sfdSet
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.1
sfdSetRebootWith this OID the device can be triggered for reboot. 0 = do nothing 1 = reboot the devicerw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.1.1
sfdSetAsPowerOnDefaultAll device settings and MIB-II variables sysContact, sysName and sysLocation will be saved. 0 = do nothing 1 = save current settingsrw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.1.3
sfdSetClock
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.2
sfdSetClockDateTimeDate and time according to format. 'YYYY-MM-DD,HH:MM:SS'rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.2.2.1
sfdSetClockOffsetSets the offset, stepsize 5 [1/10 hour]. A value of 5 means 0.5 hour.rwobsolete
Integer32 (-120..120)
.1.3.6.1.4.1.21222.1.4.1.2.2.2
sfdSetClockLockToLock the internal clock to the time received from an external source. 1 = off 2 = rds 3 = sntprw
LockToSourceModes
.1.3.6.1.4.1.21222.1.4.1.2.2.3
sfdSetClockTimezoneSets the timezone. 1 = (UTC-12:00) International Date Line West 2 = (UTC-11:00) Midway Island; Samoa 3 = (UTC-10:00) Hawaii 4 = (UTC-09:00) Alaska 5 = (UTC-08:00) Pacific Time (US and Canada) 6 = (UTC-08:00) Tijuana; Baja California 7 = (UTC-07:00) Arizona 8 = (UTC-07:00) Chihuahua; La Paz; Mazatlan 9 = (UTC-07:00) Mountain Time (US and Canada) 10 = (UTC-06:00) Central America 11 = (UTC-06:00) Central Time (US and Canada) 12 = (UTC-06:00) Guadalajara; Mexico City; Monterrey 13 = (UTC-06:00) Saskatchewan 14 = (UTC-05:00) Bogota; Lima; Quito; Rio Branco 15 = (UTC-05:00) Eastern Time (US and Canada) 16 = (UTC-05:00) Indiana (East) 17 = (UTC-04:30) Caracas 18 = (UTC-04:00) Atlantic Time (Canada) 19 = (UTC-04:00) La Paz 20 = (UTC-04:00) Manaus 21 = (UTC-04:00) Santiago 22 = (UTC-03:30) Newfoundland 23 = (UTC-03:00) Brasilia 24 = (UTC-03:00) Buenos Aires 25 = (UTC-03:00) Georgetown 26 = (UTC-03:00) Greenland 27 = (UTC-03:00) Montevideo 28 = (UTC-02:00) Mid-Atlantic 29 = (UTC-01:00) Azores 30 = (UTC-01:00) Cape Verde Is. 31 = (UTC+00:00) Casablanca 32 = (UTC+00:00) Dublin; Edinburgh; Lisbon; London 33 = (UTC+00:00) UTC; Monrovia; Reykjavik 34 = (UTC+01:00) Amsterdam; Berlin; Bern; Rome; Stockholm; Vienna 35 = (UTC+01:00) Belgrade; Bratislava; Budapest; Ljubljana; Prague 36 = (UTC+01:00) Brussels; Copenhagen; Madrid; Paris 37 = (UTC+01:00) Sarajevo; Skopje; Warsaw; Zagreb 38 = (UTC+01:00) West Central Africa 39 = (UTC+02:00) Amman 40 = (UTC+02:00) Athens; Bucharest; Istanbul 41 = (UTC+02:00) Beirut 42 = (UTC+02:00) Cairo 43 = (UTC+02:00) Harare; Pretoria 44 = (UTC+02:00) Helsinki; Kyiv; Riga; Sofia; Tallinn; Vilnius 45 = (UTC+02:00) Jerusalem 46 = (UTC+02:00) Minsk 47 = (UTC+02:00) Windhoek 48 = (UTC+03:00) Baghdad 49 = (UTC+03:00) Kuwait; Riyadh 50 = (UTC+03:00) Moscow; St. Petersburg; Volgograd 51 = (UTC+03:00) Nairobi 52 = (UTC+03:00) Tbilisi 53 = (UTC+03:30) Tehran 54 = (UTC+04:00) Abu Dhabi; Muscat 55 = (UTC+04:00) Baku 56 = (UTC+04:00) Yerevan 57 = (UTC+04:30) Kabul 58 = (UTC+05:00) Ekaterinburg 59 = (UTC+05:00) Islamabad; Karachi 60 = (UTC+05:00) Tashkent 61 = (UTC+05:30) Chennai; Kolkata; Mumbai; New Delhi 62 = (UTC+05:30) Sri Jayawardenepura 63 = (UTC+05:45) Kathmandu 64 = (UTC+06:00) Almaty; Novosibirsk 65 = (UTC+06:00) Astana; Dhaka 66 = (UTC+06:30) Yangon (Rangoon) 67 = (UTC+07:00) Bangkok; Hanoi; Jakarta 68 = (UTC+07:00) Krasnoyarsk 69 = (UTC+08:00) Beijing; Chongqing; Hong Kong; Urumqi 70 = (UTC+08:00) Irkutsk; Ulaan Bataar 71 = (UTC+08:00) Kuala Lumpur; Singapore 72 = (UTC+08:00) Perth 73 = (UTC+08:00) Taipei 74 = (UTC+09:00) Osaka; Sapporo; Tokyo 75 = (UTC+09:00) Seoul 76 = (UTC+09:00) Yakutsk 77 = (UTC+09:30) Adelaide 78 = (UTC+09:30) Darwin 79 = (UTC+10:00) Brisbane 80 = (UTC+10:00) Canberra; Melbourne; Sydney 81 = (UTC+10:00) Guam; Port Moresby 82 = (UTC+10:00) Hobart 83 = (UTC+10:00) Vladivostok 84 = (UTC+11:00) Magadan; Solomon Is.; New Caledonia 85 = (UTC+12:00) Auckland; Wellington 86 = (UTC+12:00) Fiji; Kamchatka; Marshall Is. 87 = (UTC+13:00) Nuku'alofarw
TimezoneModes
.1.3.6.1.4.1.21222.1.4.1.2.2.4
sfdSetClockDSTAllows automatic daylight saving time changes. This oid will return error NoSuchName when configured timezone will not support daylight saving time. 1 = off (disable daylight saving time) 2 = on (enable daylight saving time)rw
DSTOffOn
.1.3.6.1.4.1.21222.1.4.1.2.2.5
sfdSetRfIn
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.3
sfdSetRfInFrequencyReceiver frequency [1/100 MHz]. When option RX85_110.5 is installed, range is 8500..11050, otherwise range is 8750..10800.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.3.1
sfdSetRfInInputSelected RF-input. 1 = RF-in A 2 = RF-in Brw
RfInInputModes
.1.3.6.1.4.1.21222.1.4.1.2.3.2
sfdSetRfInAttenuatorAttenuation of the RF-input [dB]. 41 = AUTOrw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.3.3
sfdSetRfInMuteWhen the RF-input level becomes lower than this level, the RF-input will be muted [dBuV]. 61 = OFF. (When the SFD software version is older then V043 the maximum level is 50dBuV and 51=OFF.)rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.3.4
sfdSetFilter
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.4
sfdSetFilterIfMpxIF- and AF-filter settings. 1 = 180/15 kHz (small IF(180 kHz), mono MPX (15 kHz)-processing) 2 = 180/100 kHz (small IF(180 kHz), full MPX (100 kHz)-processing) 3 = 240/100 kHz (wide IF(240 kHz), full MPX (100 kHz)-processing)rw
FilterIfMpxModes
.1.3.6.1.4.1.21222.1.4.1.2.4.1
sfdSetFilterStereoThresholdRF-input threshold level which automatically enables the 180/15 kHz (narrow) filter. The stereo threshold has an 5 dBuV hysteresis [dBuV].rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.4.2
sfdSetMpx
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.5
sfdSetMpxGainGain of MPX-signal at the BNC-connectors (MPX-out) [1/10 dB]. In SFD versions older then V041 the range is 0..110, newer versions supports range -60..50rw
Integer32 (-60..110)
.1.3.6.1.4.1.21222.1.4.1.2.5.1
sfdSetMpxPreEmphasePre-emphase filter for the External MPX-input. This functionality can be switched ON when there is a straight (not pre-emphased) mono-audio-signal on the External MPX-input. 1 = off 2 = on The external MPX-input can be selected with sfdSetMpxSource.rw
MpxPreEmphaseModes
.1.3.6.1.4.1.21222.1.4.1.2.5.2
sfdSetMpxSourceThe MPX-source used for stereo de-modulation. 1 = internal 2 = external (auto) 3 = external (15kHz) 4 = external (100kHz)rw
MpxSourceModes
.1.3.6.1.4.1.21222.1.4.1.2.5.3
sfdSetMpxRdsModeSelects the type of RDS (Radio Data System) decoding. 1 = RDS (European standard) 2 = RBDS (USA standard)rw
MpxRdsModes
.1.3.6.1.4.1.21222.1.4.1.2.5.4
sfdSetMpxResetMaxDeviationThis OID will trigger a max deviation value reset. 0 = do nothing 1 = reset sfdMsrMpxMaxDeviation valuerw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.5.5
sfdSetAudio
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.6
sfdSetAudioAnalogXlrGainAudio output gain at the XLR-connectors [1/10 dB, step size 5]. In SFD versions older then V041 the range is -900..150, newer versions supports range -960..90rw
Integer32 (-960..150)
.1.3.6.1.4.1.21222.1.4.1.2.6.1
sfdSetAudioTesttoneTesttone of 500 Hz triangle waveform. 1 = off 2 = onrw
AudioTesttoneModes
.1.3.6.1.4.1.21222.1.4.1.2.6.2
sfdSetAudioDeEmphaseDe-emphase applied to the audio signal. 1 = 0uS (off) 2 = 50uS 3 = 75uSrw
AudioDeEmphaseModes
.1.3.6.1.4.1.21222.1.4.1.2.6.3
sfdSetName
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.7
sfdSetNameUnitSets the unitname. This name will be displayed when there is no RDS(PS) name available.rwobsolete
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.2.7.1
sfdSetAlarm
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8
sfdSetAlarmRfIn
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8.1
sfdSetAlarmRfInLow
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8.1.1
sfdSetAlarmRfInLowModeAlarm RF-input low mode selector. 1 = off 2 = WarningOnly 3 = warningPlusRelayA 4 = warningPlusRelayB 5 = warningPlusRelayCrw
AlarmModes
.1.3.6.1.4.1.21222.1.4.1.2.8.1.1.1
sfdSetAlarmRfInLowLevelRF-input low level [dBuV]. monitoring of RF-input level, this alarm will be activated if the RF-input level comes below the alarm RF-input level during entered delay-time.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.1.1.2
sfdSetAlarmRfInLowWarningDelayWarning delay [s], must be smaller as the corresponding alarm delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.1.1.3
sfdSetAlarmRfInLowAlarmDelayAlarm delay [s], must be bigger as the corresponding warning delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.1.1.4
sfdSetAlarmRfInHigh
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8.1.2
sfdSetAlarmRfInHighModeAlarm RF-input high mode selector. 1 = off 2 = WarningOnly 3 = warningPlusRelayA 4 = warningPlusRelayB 5 = warningPlusRelayCrw
AlarmModes
.1.3.6.1.4.1.21222.1.4.1.2.8.1.2.1
sfdSetAlarmRfInHighLevelRF-input high level [dBuV]. monitoring of RF-input level, this alarm will be activated if the RF-input level comes above the alarm RF-input level during entered delay-time.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.1.2.2
sfdSetAlarmRfInHighWarningDelayWarning delay [s], must be smaller as the corresponding alarm delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.1.2.3
sfdSetAlarmRfInHighAlarmDelayAlarm delay [s], must be bigger as the corresponding warning delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.1.2.4
sfdSetAlarmPilot
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8.2
sfdSetAlarmPilotModeAlarm pilot mode selector. 1 = off 2 = WarningOnly 3 = warningPlusRelayA 4 = warningPlusRelayB 5 = warningPlusRelayCrw
AlarmModes
.1.3.6.1.4.1.21222.1.4.1.2.8.2.1
sfdSetAlarmPilotLevelKhzPilot low level [1/10 kHz]. monitoring of pilot level, this alarm will be activated if the pilot level comes below the alarm pilot level during entered delay-time. This OID is not available when using with option 'TR5/3.5', in this case use sfdSetAlarmPilotLevelDbu.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.2.2
sfdSetAlarmPilotWarningDelayWarning delay [s], must be smaller as the corresponding alarm delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.2.3
sfdSetAlarmPilotAlarmDelayAlarm delay [s], must be bigger as the corresponding warning delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.2.4
sfdSetAlarmPilotLevelDbuPilot low level [1/10 dBu]. monitoring of pilot level, this alarm will be activated if the pilot level comes below the alarm pilot level during entered delay-time. This OID is only available when option 'TR5/3.5' is installed, otherwise use sfdSetAlarmPilotLevelKhz.rw
Integer32 (-600..-25)
.1.3.6.1.4.1.21222.1.4.1.2.8.2.5
sfdSetAlarmRds
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8.3
sfdSetAlarmRdsLevel
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8.3.1
sfdSetAlarmRdsLevelModeAlarm RDS mode selector. 1 = off 2 = WarningOnly 3 = warningPlusRelayA 4 = warningPlusRelayB 5 = warningPlusRelayCrw
AlarmModes
.1.3.6.1.4.1.21222.1.4.1.2.8.3.1.1
sfdSetAlarmRdsLevelLevelKhzRDS deviation low level [1/10 kHz]. monitoring of RDS deviation level, this alarm will be activated if the RDS deviation level comes below the alarm RDS deviation level during entered delay-time. This OID is not available when using with option 'TR5/3.5', in this case use sfdSetAlarmRdsLevelLevelDbu.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.3.1.2
sfdSetAlarmRdsLevelWarningDelayWarning delay [s], must be smaller as the corresponding alarm delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.3.1.3
sfdSetAlarmRdsLevelAlarmDelayAlarm delay [s], must be bigger as the corresponding warning delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.3.1.4
sfdSetAlarmRdsLevelLevelDbuRDS deviation low level [1/10 dBu]. monitoring of RDS deviation level, this alarm will be activated if the RDS deviation level comes below the alarm RDS deviation level during entered delay-time. This OID is not available when using with option 'TR5/3.5', in this case use sfdSetAlarmRdsLevelLevelKhz.rw
Integer32 (-600..-105)
.1.3.6.1.4.1.21222.1.4.1.2.8.3.1.5
sfdSetAlarmRdsBer
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8.3.2
sfdSetAlarmRdsBerModeAlarm RDS bit error rate mode selector. 1 = off 2 = WarningOnly 3 = warningPlusRelayA 4 = warningPlusRelayB 5 = warningPlusRelayCrw
AlarmModes
.1.3.6.1.4.1.21222.1.4.1.2.8.3.2.1
sfdSetAlarmRdsBerLevelBER RDS-data [%]. monitoring of RDS data Bit Error Rate, this alarm will be activated if the RDS BER comes below the alarm BER RDS-data during entered delay-time.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.3.2.2
sfdSetAlarmRdsBerWarningDelayWarning delay [s], must be smaller as the corresponding alarm delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.3.2.3
sfdSetAlarmRdsBerAlarmDelayAlarm delay [s], must be bigger as the corresponding warning delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.3.2.4
sfdSetAlarmRdsPi
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8.3.3
sfdSetAlarmRdsPiModeAlarm RDS PI mode selector. 1 = off 2 = WarningOnly 3 = warningPlusRelayA 4 = warningPlusRelayB 5 = warningPlusRelayCrw
AlarmModes
.1.3.6.1.4.1.21222.1.4.1.2.8.3.3.1
sfdSetAlarmRdsPiPiPI Code monitored by the RDS PI Alarm. This alarm will be activated if sfdSetAlarmRdsPiPi differs from the recieved PI Code, or no PI code is received at all.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.3.3.2
sfdSetAlarmRdsPiWarningDelayWarning delay [s], must be smaller as the corresponding alarm delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.3.3.3
sfdSetAlarmRdsPiAlarmDelayAlarm delay [s], must be bigger as the corresponding warning delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.3.3.4
sfdSetAlarmMpxDeviation
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8.4
sfdSetAlarmMpxDeviationModeAlarm MPX deviation mode selector. 1 = off 2 = WarningOnly 3 = warningPlusRelayA 4 = warningPlusRelayB 5 = warningPlusRelayCrw
AlarmModes
.1.3.6.1.4.1.21222.1.4.1.2.8.4.1
sfdSetAlarmMpxDeviationLevelMPX-deviation [kHz]. monitoring of MPX deviation, this alarm will be activated if the MPX deviation comes above the alarm MPX deviation during entered delay-time.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.4.2
sfdSetAlarmMpxDeviationOffDelayAlarm delay [s].rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.4.3
sfdSetAlarmAudio
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8.5
sfdSetAlarmAudioLeft
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8.5.1
sfdSetAlarmAudioLeftModeAlarm audio level left mode selector. 1 = off 2 = WarningOnly 3 = warningPlusRelayA 4 = warningPlusRelayB 5 = warningPlusRelayCrw
AlarmModes
.1.3.6.1.4.1.21222.1.4.1.2.8.5.1.1
sfdSetAlarmAudioLeftLevelLevel Left [dBu]. monitoring of Left audio-channel only, this alarm will be activated if Left audio channel is below the alarm-level during entered delay-time. In SFD versions older then V041 the range is -50dB(=0.14 kHz)..0 dB(=40.0 kHz), newer versions supports range -44dB(=0.14 kHz)..6 dB(=40.0 kHz)rw
Integer32 (-50..6)
.1.3.6.1.4.1.21222.1.4.1.2.8.5.1.2
sfdSetAlarmAudioLeftWarningDelayWarning delay [s], must be smaller as the corresponding alarm delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.5.1.3
sfdSetAlarmAudioLeftAlarmDelayAlarm delay [s], must be bigger as the corresponding warning delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.5.1.4
sfdSetAlarmAudioRight
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8.5.2
sfdSetAlarmAudioRightModeAlarm audio level right mode selector. 1 = off 2 = WarningOnly 3 = warningPlusRelayA 4 = warningPlusRelayB 5 = warningPlusRelayCrw
AlarmModes
.1.3.6.1.4.1.21222.1.4.1.2.8.5.2.1
sfdSetAlarmAudioRightLevelLevel Right [dBu] monitoring of Right audio-channel only, this alarm will be activated if Right audio channel is below the alarm-level during entered delay-time. In SFD versions older then V041 the range is -50dB(=0.14 kHz)..0 dB(=40.0 kHz), newer versions supports range -44dB(=0.14 kHz)..6 dB(=40.0 kHz)rw
Integer32 (-50..6)
.1.3.6.1.4.1.21222.1.4.1.2.8.5.2.2
sfdSetAlarmAudioRightWarningDelayWarning delay [s], must be smaller as the corresponding alarm delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.5.2.3
sfdSetAlarmAudioRightAlarmDelayAlarm delay [s], must be bigger as the corresponding warning delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.5.2.4
sfdSetAlarmAudioBoth
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.8.5.3
sfdSetAlarmAudioBothModeAlarm audio level both mode selector. 1 = off 2 = WarningOnly 3 = warningPlusRelayA 4 = warningPlusRelayB 5 = warningPlusRelayCrw
AlarmModes
.1.3.6.1.4.1.21222.1.4.1.2.8.5.3.1
sfdSetAlarmAudioBothLevelLevel Both [dBu]. monitoring of Left and Right audio-channel, this alarm will be activated if both Left and Right are below the alarm-level during entered delay-time. In SFD versions older then V041 the range is -50dB(=0.14 kHz)..0 dB(=40.0 kHz), newer versions supports range -44dB(=0.14 kHz)..6 dB(=40.0 kHz)rw
Integer32 (-50..6)
.1.3.6.1.4.1.21222.1.4.1.2.8.5.3.2
sfdSetAlarmAudioBothWarningDelayWarning delay [s], must be smaller as the corresponding alarm delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.5.3.3
sfdSetAlarmAudioBothAlarmDelayAlarm delay [s], must be bigger as the corresponding warning delay.rw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.8.5.3.4
sfdSetControlIO
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.9
sfdSetControlIOInput
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.9.1
sfdSetControlIOInput0Input 0 mode selector. 1 = Not Used (no function assigned) 2 = Input A/B (input will switch to the other RF-input) 3 = Frequency + 10 kHz (RF-input frequency will be increased with 10 kHz) 4 = Frequency + 100 kHz (RF-input frequency will be increased with 100 kHz) 5 = Frequency - 10 kHz (RF-input frequency will be decreased with 10 kHz) 6 = Frequency - 100 kHz (RF-input frequency will be decreased with 100 kHz) 7 = Preset next (next preset will become active) 8 = Preset previous (previous preset will become active) 9..72 = Preset x (x=1 to 64) (The SFD will switch to Preset x (which becomes active))rw
InputModes
.1.3.6.1.4.1.21222.1.4.1.2.9.1.1
sfdSetControlIOInput1Input 1 mode selector. 1 = Not Used (no function assigned) 2 = Input A/B (input will switch to the other RF-input) 3 = Frequency + 10 kHz (RF-input frequency will be increased with 10 kHz) 4 = Frequency + 100 kHz (RF-input frequency will be increased with 100 kHz) 5 = Frequency - 10 kHz (RF-input frequency will be decreased with 10 kHz) 6 = Frequency - 100 kHz (RF-input frequency will be decreased with 100 kHz) 7 = Preset next (next preset will become active) 8 = Preset previous (previous preset will become active) 9..72 = Preset x (x=1 to 64) (The SFD will switch to Preset x (which becomes active))rw
InputModes
.1.3.6.1.4.1.21222.1.4.1.2.9.1.2
sfdSetControlIOInput2Input 2 mode selector. 1 = Not Used (no function assigned) 2 = Input A/B (input will switch to the other RF-input) 3 = Frequency + 10 kHz (RF-input frequency will be increased with 10 kHz) 4 = Frequency + 100 kHz (RF-input frequency will be increased with 100 kHz) 5 = Frequency - 10 kHz (RF-input frequency will be decreased with 10 kHz) 6 = Frequency - 100 kHz (RF-input frequency will be decreased with 100 kHz) 7 = Preset next (next preset will become active) 8 = Preset previous (previous preset will become active) 9..72 = Preset x (x=1 to 64) (The SFD will switch to Preset x (which becomes active))rw
InputModes
.1.3.6.1.4.1.21222.1.4.1.2.9.1.3
sfdSetControlIOInput3Input 3 mode selector. 1 = Not Used (no function assigned) 2 = Input A/B (input will switch to the other RF-input) 3 = Frequency + 10 kHz (RF-input frequency will be increased with 10 kHz) 4 = Frequency + 100 kHz (RF-input frequency will be increased with 100 kHz) 5 = Frequency - 10 kHz (RF-input frequency will be decreased with 10 kHz) 6 = Frequency - 100 kHz (RF-input frequency will be decreased with 100 kHz) 7 = Preset next (next preset will become active) 8 = Preset previous (previous preset will become active) 9..72 = Preset x (x=1 to 64) (The SFD will switch to Preset x (which becomes active))rw
InputModes
.1.3.6.1.4.1.21222.1.4.1.2.9.1.4
sfdSetControlIOOutput
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.9.2
sfdSetControlIOOutput0Output 0 mode selector. 1 = Not Used (no function assigned) 2 = RDS TA (when RDS TA-bit is set the output will be TRUE) 3 = RDS TP (when RDS TP-bit is set the output will be TRUE) 4 = RDS TA & TP (when RDS TA and the TP-bit are set the output will be TRUE) 5 = RDS MS (when RDS M/S-bit is set to Mono the output will be TRUE, when Stereo the output will be CLEARED) 6 = RDS PTY NEWS (when RDS PTY is set to NEWS set the output will be TRUE) 7 = RDS PTY ALARM (when RDS PTY is set to ALARM set the output will be TRUE) 8 = MPX MONO/STEREO (when received signal is Mono the output will be TRUE, when Stereo the output will be CLEARED)rw
OutputModes
.1.3.6.1.4.1.21222.1.4.1.2.9.2.1
sfdSetControlIOOutput1Output 1 mode selector. 1 = Not Used (no function assigned) 2 = RDS TA (when RDS TA-bit is set the output will be TRUE) 3 = RDS TP (when RDS TP-bit is set the output will be TRUE) 4 = RDS TA & TP (when RDS TA and the TP-bit are set the output will be TRUE) 5 = RDS MS (when RDS M/S-bit is set to Mono the output will be TRUE, when Stereo the output will be CLEARED) 6 = RDS PTY NEWS (when RDS PTY is set to NEWS set the output will be TRUE) 7 = RDS PTY ALARM (when RDS PTY is set to ALARM set the output will be TRUE) 8 = MPX MONO/STEREO (when received signal is Mono the output will be TRUE, when Stereo the output will be CLEARED)rw
OutputModes
.1.3.6.1.4.1.21222.1.4.1.2.9.2.2
sfdSetControlIOOutput2Output 2 mode selector. 1 = Not Used (no function assigned) 2 = RDS TA (when RDS TA-bit is set the output will be TRUE) 3 = RDS TP (when RDS TP-bit is set the output will be TRUE) 4 = RDS TA & TP (when RDS TA and the TP-bit are set the output will be TRUE) 5 = RDS MS (when RDS M/S-bit is set to Mono the output will be TRUE, when Stereo the output will be CLEARED) 6 = RDS PTY NEWS (when RDS PTY is set to NEWS set the output will be TRUE) 7 = RDS PTY ALARM (when RDS PTY is set to ALARM set the output will be TRUE) 8 = MPX MONO/STEREO (when received signal is Mono the output will be TRUE, when Stereo the output will be CLEARED)rw
OutputModes
.1.3.6.1.4.1.21222.1.4.1.2.9.2.3
sfdSetControlIOOutput3Output 3 mode selector. 1 = Not Used (no function assigned) 2 = RDS TA (when RDS TA-bit is set the output will be TRUE) 3 = RDS TP (when RDS TP-bit is set the output will be TRUE) 4 = RDS TA & TP (when RDS TA and the TP-bit are set the output will be TRUE) 5 = RDS MS (when RDS M/S-bit is set to Mono the output will be TRUE, when Stereo the output will be CLEARED) 6 = RDS PTY NEWS (when RDS PTY is set to NEWS set the output will be TRUE) 7 = RDS PTY ALARM (when RDS PTY is set to ALARM set the output will be TRUE) 8 = MPX MONO/STEREO (when received signal is Mono the output will be TRUE, when Stereo the output will be CLEARED)rw
OutputModes
.1.3.6.1.4.1.21222.1.4.1.2.9.2.4
sfdSetNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.10
sfdSetNotificationMode
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.10.1
sfdSetNotificationModeAllSelect if device notifications will be sent. This includes coldStart, warmStart and authenticationFailure notifications. 1 = off (disable all notifications) 2 = on (send notifications)rw
NotificationOffOn
.1.3.6.1.4.1.21222.1.4.1.2.10.1.1
sfdSetNotificationModeHeartbeatSelect if heartbeat notification will be sent 1 = off (disable heartbeat notification) 2 = on (enable heartbeat notification)rw
NotificationOffOn
.1.3.6.1.4.1.21222.1.4.1.2.10.1.2
sfdSetNotificationModeSettingChangedSelect if last setting changed notification will be sent. 1 = off (disable last changed setting notification) 2 = on (enable last changed setting notification)rw
NotificationOffOn
.1.3.6.1.4.1.21222.1.4.1.2.10.1.3
sfdSetNotificationModeControlModeSelect if control mode notification will be sent. 1 = off (disable control mode notification) 2 = on (enable control mode notification)rw
NotificationOffOn
.1.3.6.1.4.1.21222.1.4.1.2.10.1.4
sfdSetNotificationModeControlModeLocalSuppressSelect of notifications will be suppressed during device local mode. 1 = off (don't suppress notifications when when sfdMsrControlMode is local) 2 = on (supress notifications when when sfdMsrControlMode is local)rw
NotificationOffOn
.1.3.6.1.4.1.21222.1.4.1.2.10.1.5
sfdSetNotificationModeAlarm
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.10.2
sfdSetNotificationModeAlarmRfInLevelLowSelect which status-change of sfdMsrAlarmRfInLevelLow sends a notification. 1 = off (no notification will be sent when value changes) 2 = warning (notification only send when value changes from idle to warning state or problem solves) 3 = warningAndAlarm (notification send when value changes from idle to warning or alarm state, or from warning to alarm state, or problem solves) 4 = alarm (notification only send when value changes from idle to alarm state, or from warning to alarm state, or problem solves)rw
NotificationModes
.1.3.6.1.4.1.21222.1.4.1.2.10.2.1
sfdSetNotificationModeAlarmRfInLevelHighSelect which status-change of sfdMsrAlarmRfInLevelHigh sends a notification. 1 = off (no notification will be sent when value changes) 2 = warning (notification only send when value changes from idle to warning state or problem solves) 3 = warningAndAlarm (notification send when value changes from idle to warning or alarm state, or from warning to alarm state, or problem solves) 4 = alarm (notification only send when value changes from idle to alarm state, or from warning to alarm state, or problem solves)rw
NotificationModes
.1.3.6.1.4.1.21222.1.4.1.2.10.2.2
sfdSetNotificationModeAlarmPilotLevelSelect which status-change of sfdMsrAlarmAlarmPilotLevel sends a notification. 1 = off (no notification will be sent when value changes) 2 = warning (notification only send when value changes from idle to warning state or problem solves) 3 = warningAndAlarm (notification send when value changes from idle to warning or alarm state, or from warning to alarm state, or problem solves) 4 = alarm (notification only send when value changes from idle to alarm state, or from warning to alarm state, or problem solves)rw
NotificationModes
.1.3.6.1.4.1.21222.1.4.1.2.10.2.3
sfdSetNotificationModeAlarmMpxDeviationSelect which status-change of sfdMsrAlarmMpxDeviation sends a notification. 1 = off (no notification will be sent when value changes) 2 = warning (notification only send when value changes from idle to warning state or problem solves) 3 = warningAndAlarm (notification send when value changes from idle to warning or alarm state, or from warning to alarm state, or problem solves) 4 = alarm (notification only send when value changes from idle to alarm state, or from warning to alarm state, or problem solves)rw
NotificationModes
.1.3.6.1.4.1.21222.1.4.1.2.10.2.4
sfdSetNotificationModeAlarmRdsBerSelect which status-change of sfdMsrAlarmRdsBer sends a notification. 1 = off (no notification will be sent when value changes) 2 = warning (notification only send when value changes from idle to warning state or problem solves) 3 = warningAndAlarm (notification send when value changes from idle to warning or alarm state, or from warning to alarm state, or problem solves) 4 = alarm (notification only send when value changes from idle to alarm state, or from warning to alarm state, or problem solves)rw
NotificationModes
.1.3.6.1.4.1.21222.1.4.1.2.10.2.5
sfdSetNotificationModeAlarmRdsLevelSelect which status-change of sfdMsrAlarmRdsLevel sends a notification. 1 = off (no notification will be sent when value changes) 2 = warning (notification only send when value changes from idle to warning state or problem solves) 3 = warningAndAlarm (notification send when value changes from idle to warning or alarm state, or from warning to alarm state, or problem solves) 4 = alarm (notification only send when value changes from idle to alarm state, or from warning to alarm state, or problem solves)rw
NotificationModes
.1.3.6.1.4.1.21222.1.4.1.2.10.2.6
sfdSetNotificationModeAlarmAudioLevelLeftSelect which status-change of sfdMsrAlarmAudioLevelLeft sends a notification. 1 = off (no notification will be sent when value changes) 2 = warning (notification only send when value changes from idle to warning state or problem solves) 3 = warningAndAlarm (notification send when value changes from idle to warning or alarm state, or from warning to alarm state, or problem solves) 4 = alarm (notification only send when value changes from idle to alarm state, or from warning to alarm state, or problem solves)rw
NotificationModes
.1.3.6.1.4.1.21222.1.4.1.2.10.2.7
sfdSetNotificationModeAlarmAudioLevelRightSelect which status-change of sfdMsrAlarmAudioLevelRight sends a notification. 1 = off (no notification will be sent when value changes) 2 = warning (notification only send when value changes from idle to warning state or problem solves) 3 = warningAndAlarm (notification send when value changes from idle to warning or alarm state, or from warning to alarm state, or problem solves) 4 = alarm (notification only send when value changes from idle to alarm state, or from warning to alarm state, or problem solves)rw
NotificationModes
.1.3.6.1.4.1.21222.1.4.1.2.10.2.8
sfdSetNotificationModeAlarmAudioLevelBothSelect which status-change of sfdMsrAlarmAudioLevelBoth sends a notification. 1 = off (no notification will be sent when value changes) 2 = warning (notification only send when value changes from idle to warning state or problem solves) 3 = warningAndAlarm (notification send when value changes from idle to warning or alarm state, or from warning to alarm state, or problem solves) 4 = alarm (notification only send when value changes from idle to alarm state, or from warning to alarm state, or problem solves)rw
NotificationModes
.1.3.6.1.4.1.21222.1.4.1.2.10.2.9
sfdSetNotificationModeAlarmRdsPiSelect which status-change of sfdMsrAlarmRdsPi sends a notification. 1 = off (no notification will be sent when value changes) 2 = warning (notification only send when value changes from idle to warning state or problem solves) 3 = warningAndAlarm (notification send when value changes from idle to warning or alarm state, or from warning to alarm state, or problem solves) 4 = alarm (notification only send when value changes from idle to alarm state, or from warning to alarm state, or problem solves)rw
NotificationModes
.1.3.6.1.4.1.21222.1.4.1.2.10.2.10
sfdSetNotificationPriority
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.10.3
sfdSetNotificationPriorityHeartbeatPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.1
sfdSetNotificationPrioritySettingChangedPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.2
sfdSetNotificationPriorityControlModePriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.3
sfdSetNotificationPriorityAlarmRfInLevelLowPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.401
sfdSetNotificationPriorityAlarmRfInLevelHighPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.402
sfdSetNotificationPriorityAlarmPilotLevelPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.403
sfdSetNotificationPriorityAlarmMpxDeviationPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.404
sfdSetNotificationPriorityAlarmRdsBerPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.405
sfdSetNotificationPriorityAlarmRdsLevelPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.406
sfdSetNotificationPriorityAlarmAudioLevelLeftPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.407
sfdSetNotificationPriorityAlarmAudioLevelRightPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.408
sfdSetNotificationPriorityAlarmAudioLevelBothPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.409
sfdSetNotificationPriorityAlarmRdsPiPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.410
sfdSetNotificationPriorityStatusRfInFrequencyPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.451
sfdSetNotificationPriorityStatusRfInInputPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.452
sfdSetNotificationPriorityStatusRfInMutedPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.453
sfdSetNotificationPriorityStatusRfInFilterPriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.454
sfdSetNotificationPriorityStatusMpxSourcePriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.455
sfdSetNotificationPriorityStatusAudioTestTonePriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.456
sfdSetNotificationPriorityStatusAudioDeEmphasePriority level which is coupled into the bindings of the notificationrw
Gauge32
.1.3.6.1.4.1.21222.1.4.1.2.10.3.457
sfdSetNotificationModeStatus
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.10.4
sfdSetNotificationModeStatusRfInFrequencySelect if status changed notification of sfdSetRfInFrequency will be sent. 1 = off (disable status changed notification) 2 = on (enable status changed notification)rw
NotificationOffOn
.1.3.6.1.4.1.21222.1.4.1.2.10.4.1
sfdSetNotificationModeStatusRfInInputSelect if status changed notification of sfdSetRfInInput will be sent. 1 = off (disable status changed notification) 2 = on (enable status changed notification)rw
NotificationOffOn
.1.3.6.1.4.1.21222.1.4.1.2.10.4.2
sfdSetNotificationModeStatusRfInMutedSelect if status changed notification of sfdMsrRfInMuted will be sent. 1 = off (disable status changed notification) 2 = on (enable status changed notification)rw
NotificationOffOn
.1.3.6.1.4.1.21222.1.4.1.2.10.4.3
sfdSetNotificationModeStatusRfInFilterSelect if status changed notification of sfdMsrRfInFilter will be sent. 1 = off (disable status changed notification) 2 = on (enable status changed notification)rw
NotificationOffOn
.1.3.6.1.4.1.21222.1.4.1.2.10.4.4
sfdSetNotificationModeStatusMpxSourceSelect if status changed notification of sfdSetMpxSource will be sent. 1 = off (disable status changed notification) 2 = on (enable status changed notification)rw
NotificationOffOn
.1.3.6.1.4.1.21222.1.4.1.2.10.4.5
sfdSetNotificationModeStatusAudioTestToneSelect if status changed notification of sfdSetAudioTestTone will be sent. 1 = off (disable status changed notification) 2 = on (enable status changed notification)rw
NotificationOffOn
.1.3.6.1.4.1.21222.1.4.1.2.10.4.6
sfdSetNotificationModeStatusAudioDeEmphaseSelect if status changed notification of sfdSetAudioDeEmphase will be sent. 1 = off (disable status changed notification) 2 = on (enable status changed notification)rw
NotificationOffOn
.1.3.6.1.4.1.21222.1.4.1.2.10.4.7
sfdSetPreset
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.2.11
sfdSetPresetRecallRecall preset with a given preset number. 0 = do nothing 1..64 = given preset numberrw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.11.1
sfdSetPresetSaveAsSave preset as a given preset number. 0 = do nothing 1..64 = given preset numberrw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.11.2
sfdSetPresetActiveDefaultsLoad active preset defaults. 0 = do nothing 1 = active default presetrw
Integer32
.1.3.6.1.4.1.21222.1.4.1.2.11.3
sfdSetPresetActiveNameSets the name of the active preset.rw
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.2.11.4
sfdMeasurements
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.3
sfdMsrAlarm
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.3.1
sfdMsrAlarmRfInLevelLowAlarm-status of the receiver frequency low level. 1 = noProblem (no alarm indication) 3 = warning (warning indication) 5 = alarm (alarm indication)ro
AlarmStatus
.1.3.6.1.4.1.21222.1.4.1.3.1.1
sfdMsrAlarmRfInLevelHighAlarm-status of the receiver frequency high level alarm. 1 = noProblem (no alarm indication) 3 = warning (warning indication) 5 = alarm (alarm indication)ro
AlarmStatus
.1.3.6.1.4.1.21222.1.4.1.3.1.2
sfdMsrAlarmPilotLevelAlarm-status of the pilot level alarm. 1 = noProblem (no alarm indication) 3 = warning (warning indication) 5 = alarm (alarm indication)ro
AlarmStatus
.1.3.6.1.4.1.21222.1.4.1.3.1.3
sfdMsrAlarmMpxDeviationAlarm-status of the MPX deviation level alarm. 1 = noProblem (no alarm indication) 3 = warning (warning indication) 5 = alarm (alarm indication)ro
AlarmStatus
.1.3.6.1.4.1.21222.1.4.1.3.1.4
sfdMsrAlarmRdsBerAlarm-status of the RDS bit error rate alarm. 1 = noProblem (no alarm indication) 3 = warning (warning indication) 5 = alarm (alarm indication)ro
AlarmStatus
.1.3.6.1.4.1.21222.1.4.1.3.1.5
sfdMsrAlarmRdsLevelAlarm-status of the RDS level alarm. 1 = noProblem (no alarm indication) 3 = warning (warning indication) 5 = alarm (alarm indication)ro
AlarmStatus
.1.3.6.1.4.1.21222.1.4.1.3.1.6
sfdMsrAlarmAudioLevelLeftAlarm-status of the left audio level alarm. 1 = noProblem (no alarm indication) 3 = warning (warning indication) 5 = alarm (alarm indication)ro
AlarmStatus
.1.3.6.1.4.1.21222.1.4.1.3.1.7
sfdMsrAlarmAudioLevelRightAlarm-status of the right audio level alarm. 1 = noProblem (no alarm indication) 3 = warning (warning indication) 5 = alarm (alarm indication)ro
AlarmStatus
.1.3.6.1.4.1.21222.1.4.1.3.1.8
sfdMsrAlarmAudioLevelBothAlarm-status of the both audio level alarm. 1 = noProblem (no alarm indication) 3 = warning (warning indication) 5 = alarm (alarm indication)ro
AlarmStatus
.1.3.6.1.4.1.21222.1.4.1.3.1.9
sfdMsrAlarmRdsPiAlarm-status of the RDS PI alarm. 1 = noProblem (no alarm indication) 3 = warning (warning indication) 5 = alarm (alarm indication)ro
AlarmStatus
.1.3.6.1.4.1.21222.1.4.1.3.1.10
sfdMsrNotification
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.3.2
sfdMsrNotificationCounterThe number of Notifications sent. Is set to 0 when the LAN port boots.ro
Counter32
.1.3.6.1.4.1.21222.1.4.1.3.2.1
sfdMsrNotificationTimeStampThe Timestamp of the last sent notification in DateAndTime(2d-1d-1d,1d:1d:1d.1d,1a1d:1d) format.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.21222.1.4.1.3.2.2
sfdMsrNotificationLastSettingChangedThe object identification (OID) number of the last changed setting.ro
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.3.2.3
sfdMsrNotificationLastSettingChangedFromThe last changed setting was changed from this source: 1 = snmp (settings are change from SNMP service) 2 = web (settings are change from WEB service) 3 = local (settings are change locally on the device)ro
NotificationSettingChangedFrom
.1.3.6.1.4.1.21222.1.4.1.3.2.4
sfdMsrNotificationPriorityThe priority level of the last sent notification.ro
Gauge32
.1.3.6.1.4.1.21222.1.4.1.3.2.5
sfdMsrRfIn
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.3.3
sfdMsrRfInFilterMode of the configurable filter. 1 = mono 180/15kHz 2 = narrow 180/100kHz 3 = wide 240/100kHz The behaviour can be altered with sfdSetFilterIfMpx and sfdSetFilterStereoThreshold.ro
FilterIfMpxModes
.1.3.6.1.4.1.21222.1.4.1.3.3.1
sfdMsrRfInSignalStrengthFrequency audio level strength [dbuV]. If the value is greater then 115 this indicates an overload situationro
Integer32
.1.3.6.1.4.1.21222.1.4.1.3.3.2
sfdMsrRfInMutedIndicates if the RF-input is muted. 1 = notMuted 2 = muted The behaviour can be altered with sfdSetRfInMute.ro
RfInMuted
.1.3.6.1.4.1.21222.1.4.1.3.3.3
sfdMsrMpx
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.3.4
sfdMsrMpxPilotLevelKhzMPX Pilot level [1/10 kHz]. when value is greater than 150, this indicates an overload situation. This OID is not available when using with option 'TR5/3.5', in this case use sfdMsrMpxPilotLevelDbu.ro
Integer32
.1.3.6.1.4.1.21222.1.4.1.3.4.1
sfdMsrMpxRdsLevelKhzMPX RDS level [1/10 kHz]. when value is greater than 60, this indicates an overload situation. This OID is not available when using with option 'TR5/3.5', in this case use sfdMsrMpxRdsLevelDbu.ro
Integer32
.1.3.6.1.4.1.21222.1.4.1.3.4.2
sfdMsrMpxRdsBerMPX RDS bit error rate [%].ro
Integer32
.1.3.6.1.4.1.21222.1.4.1.3.4.3
sfdMsrMpxMaxDeviationMPX maximal frequency deviation [kHz]. when value is greater than 160, this indicates an overload situation This value can be reset by sfdSetMpxResetMaxDeviation.ro
Integer32
.1.3.6.1.4.1.21222.1.4.1.3.4.4
sfdMsrMpxDeviationMPX frequency deviation [kHz].ro
Integer32
.1.3.6.1.4.1.21222.1.4.1.3.4.5
sfdMsrMpxPilotLevelDbuMPX Pilot level [1/10 dBu]. when value is greater than -25, this indicates an overload situation. This OID is only available when option 'TR5/3.5' is installed, otherwise use sfdMsrMpxPilotLevelKhz.ro
Integer32
.1.3.6.1.4.1.21222.1.4.1.3.4.6
sfdMsrMpxRdsLevelDbuMPX RDS level [1/10 dBu]. when value is greater than -105, this indicates an overload situation. This OID is only available when option 'TR5/3.5' is installed, otherwise use sfdMsrMpxRdsLevelKhz.ro
Integer32
.1.3.6.1.4.1.21222.1.4.1.3.4.7
sfdMsrAudio
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.3.5
sfdMsrAudioLeftLevelAudio left channel level [dBFS].ro
Integer32
.1.3.6.1.4.1.21222.1.4.1.3.5.1
sfdMsrAudioRightLevelAudio right channel level [dBFS].ro
Integer32
.1.3.6.1.4.1.21222.1.4.1.3.5.2
sfdMsrRds
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.3.6
sfdMsrRdsTARDS Traffic Announcement. 1 = no 2 = yesro
RdsTAModes
.1.3.6.1.4.1.21222.1.4.1.3.6.1
sfdMsrRdsTPRDS Traffic Programme. 1 = off 2 = onro
RdsTPModes
.1.3.6.1.4.1.21222.1.4.1.3.6.2
sfdMsrRdsPIRDS Programme Identification.ro
Integer32
.1.3.6.1.4.1.21222.1.4.1.3.6.3
sfdMsrRdsDIRDS Decoder Identification. 1 = mono 2 = stereoro
RdsDIModes
.1.3.6.1.4.1.21222.1.4.1.3.6.4
sfdMsrRdsPSRDS Programme Service name.ro
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.3.6.5
sfdMsrRdsMSRDS Music Speech. 1 = speech 2 = musicro
RdsMSModes
.1.3.6.1.4.1.21222.1.4.1.3.6.6
sfdMsrRdsPTYRDS Programme Type. when sfdSetMpxRdsMode is set to 1 (=RDS) the range is 1..32, otherwise sfdSetMpxRdsMode is set to 2 (=RBDS) the range is 33..64. 1 = None 2 = News 3 = Current Affairs 4 = Information 5 = Sport 6 = Education 7 = Drama 8 = Cultures 9 = Science 10 = Varied Speech 11 = Pop Music 12 = Rock Music 13 = Easy Listening 14 = Light Classics 15 = Serious Classics 16 = Other Music 17 = Weather 18 = Finance 19 = Childers Progs 20 = Social Affairs 21 = Religion 22 = Phone In 23 = Travel Touring 24 = Leisure Hobby 25 = Jazz Music 26 = Country Music 27 = National Music 28 = Oldies Music 29 = Folk Music 30 = Documentary 31 = Alarm Test 32 = Alarm Alarm 33 = None(33), 34 = News(34), 35 = Information(35), 36 = Sports(36), 37 = Talk(37), 38 = Rock(38), 39 = Classic Rock(39), 40 = Adult Hits(40), 41 = Soft Rock(41), 42 = Top 40(42), 43 = Country(43), 44 = Oldies(44), 45 = Soft(45), 46 = Nostalgia(46), 47 = Jazz(47), 48 = Classical(48), 49 = Rhythm and Blues(49), 50 = Soft Rhythm and Blues(50), 51 = Language(51), 52 = Religious Music(52), 53 = Religious Talk(53), 54 = Personality(54), 55 = Public(55), 56 = College(56), 57 = Unassigned(57), 58 = Unassigned(58), 59 = Unassigned(59), 60 = Unassigned(60), 61 = Unassigned(61), 62 = Weather(62), 63 = Emergency Test(63), 64 = Emergency(64)ro
RdsPTYModes
.1.3.6.1.4.1.21222.1.4.1.3.6.7
sfdMsrRdsRTRDS Radio Text.ro
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.3.6.8
sfdMsrRdsCTTimeRDS Clock Time.ro
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.3.6.9
sfdMsrRdsCTDateRDS Clock Date.ro
OCTET STRING
.1.3.6.1.4.1.21222.1.4.1.3.6.10
sfdMsr
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.3.7
sfdMsrControlModeThe active control mode. 1 = local (device can only be controlled locally) 2 = remote (device can only be controlled remotely) 3 = localPlusRemote (device can be controlled locally and remotely) localPlusRemote is not supported when option 'TR5/3.5' is installed.ro
ControlMode
.1.3.6.1.4.1.21222.1.4.1.3.7.1
sfdGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.21222.1.4.1.4
sfdGrpIdentityFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.1
sfdGrpSetFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.2
sfdGrpSetClockFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.3
sfdGrpSetRfInFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.4
sfdGrpSetFilterFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.5
sfdGrpSetMpxFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.6
sfdGrpSetAudioFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.7
sfdGrpSetNameFor future reference.obsolete
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.8
sfdGrpSetAlarmRfInLowFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.9
sfdGrpSetAlarmRfInHighFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.10
sfdGrpSetAlarmPilotFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.11
sfdGrpSetAlarmRdsLevelFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.12
sfdGrpSetAlarmRdsBerFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.13
sfdGrpSetAlarmMpxDeviationFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.14
sfdGrpSetAlarmAudioLeftFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.15
sfdGrpSetAlarmAudioRightFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.16
sfdGrpSetAlarmAudioBothFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.17
sfdGrpSetIOInputFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.18
sfdGrpSetIOOutputFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.19
sfdGrpSetNotificationModeFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.20
sfdGrpSetNotificationModeAlarmFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.21
sfdGrpMsrAlarmFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.22
sfdGrpMsrNotificationFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.23
sfdGrpMsrRfinFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.24
sfdGrpMsrMpxFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.25
sfdGrpMsrAudioFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.26
sfdGrpMsrRdsFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.27
sfdGrpMsrFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.30
sfdGrpSetNotificationPriorityFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.31
sfdGrpSetObsoletedItemsFor future reference.obsolete
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.32
sfdGrpSetAlarmRdsPiFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.33
sfdGrpSetNotificationModeStatusFor future reference.
Unknown
.1.3.6.1.4.1.21222.1.4.1.4.34
sfdComplianceThe implementation requirements specification for implementing the complete sfd module. Exceptions, optional conditions and value range requirements are denoted in the object description.
Unknown
.1.3.6.1.4.1.21222.1.4.1.5
PROFLINE-SFD-MIB - SNMP MIB Reference | MIBs Explorer