PLEXCOM-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
242
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
242 total| Object Name |
|---|
plexcom OBJECT IDENTIFIER .1.3.6.1.4.1.465 |
RFC-1215 Unknown .1.3.6.1.4.1.465 |
plxPanicMesgTrapThe plxPanicMesgTrap trap is generated when the agent
resets for a reason other than a normal hardware reset
or restart condition. The plxSysPanicMesg variable
contains a textual explanation for the reset, as saved
in non-volatile memory. TRAP-TYPE .1.3.6.1.4.1.465.0.4 |
plxGenericHubTrapThe generic hub trap is sent when one of several
changes occurs in the status of the agent. There are
three conditions which may cause this: the addition or
deletion of a group (usually a module) from the agent (or
chassis), in which case the plxGroupType variable is
returned, and changes in the autopartition or link states
of a given port, in which case the plxPortAutoPartState or
plxPortLinkState variables are returned, respectively. TRAP-TYPE .1.3.6.1.4.1.465.0.5 |
plxSecurityViolationTrapThe security violation trap is sent when an alarm
occurs in the agent that indicates a configured security
provision has been violated. In conjunture with the
plxIntruderControlTable, this trap is sent when an
non-allowed intruder source address is detected on a
port. In this case, the plxIcCurrentSourceAddress
variable is returned indicating the violating address
on the affected port. TRAP-TYPE .1.3.6.1.4.1.465.0.6 |
plxNode OBJECT IDENTIFIER .1.3.6.1.4.1.465.1 |
plxAgent OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1 |
plxStBridgeagent OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.1 |
plxStBridgesnmpd OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.1.1 |
plxPlexcomHub8091 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.1.1.4 |
plxPlexcomHub8039 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.1.1.5 |
plxPlexcomHub8029 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.1.1.6 |
plxPlexcomHub8093 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.1.1.7 |
plxRepeaterAgent OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.2 |
plxPlexcom8025 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.2.1 |
plxPlexcom8025SX OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.2.1.1 |
plxPlexcom8025SXT OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.2.1.2 |
plxPlexcomH8025SXT OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.2.1.3 |
plxPlexcomH8025SX OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.2.1.4 |
plxPlexcomS8025SXT OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.2.1.5 |
plxPlexcomS8025SX OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.2.1.6 |
plxPlexcomPlexSTACK OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.2.2 |
plxPlexcom4000i OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.2.2.1 |
plxPlexcom4000iR OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.2.2.2 |
plxSwitchAgent OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.3 |
plxPlexcom5108 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.1.3.1 |
plxModule OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2 |
plxModuleUnknown OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.1 |
plxModule8010 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.2 |
plxModule8011 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.3 |
plxModule8023A OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.4 |
plxModule8024A OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.5 |
plxModule8024T OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.6 |
plxModule8026A OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.7 |
plxModule8026T OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.8 |
plxModule8029M OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.9 |
plxModule8091M OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.10 |
plxModule8023 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.11 |
plxModule8031 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.13 |
plxModule8031A OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.14 |
plxModule8033 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.15 |
plxModule8034 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.16 |
plxModule8033A OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.17 |
plxModule8024FO OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.24 |
plxModule8039M OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.32 |
plxModule8039S OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.33 |
plxModule8026FO OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.34 |
plxModule8408 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.35 |
plxModule8400FO OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.36 |
plxModule8032-R OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.43 |
plxModule8032-1P OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.45 |
plxModule8032-2P OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.47 |
plxModule8032-4P OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.51 |
plxModule8032-6P OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.55 |
plxModule2008SX OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.56 |
plxModule8035 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.58 |
plxModule8035STP OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.59 |
plxModule8036 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.60 |
plxModule8023SX OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.70 |
plxModule8012SX-1 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.71 |
plxModule8012SX-6 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.72 |
plxModule8024SX OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.73 |
plxModule8027SX OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.74 |
plxModule8091SXM OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.75 |
plxModule8029SX-3M OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.76 |
plxModule8029SX-3S OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.77 |
plxModule8025SX OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.78 |
plxModule8025SXT OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.79 |
plxModuleH8025SX OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.81 |
plxModuleS8025SXT OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.82 |
plxModuleS8025SX OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.83 |
plxModule8408FO OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.84 |
plxModule8012SX-2 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.85 |
plxModule8012SX-4 OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.86 |
plxModule8026SX OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.88 |
plxModule8035SX OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.89 |
plxModuleP8035SX OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.90 |
plxModule8093SXM OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.91 |
plxModule8093SXS OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.92 |
plxModule8039SXM OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.93 |
plxModule8039SXS OBJECT IDENTIFIER .1.3.6.1.4.1.465.1.2.94 |
plxFilterTable OBJECT IDENTIFIER .1.3.6.1.4.1.465.2 |
plxFtConfig OBJECT IDENTIFIER .1.3.6.1.4.1.465.2.1 |
plxFtMaxAgeMaximum age of a filter table entry before it is
deleted from the table. The value is multiplied by
plxFtAgeTime (update timer interval) to form the
timer value in seconds.rw INTEGER .1.3.6.1.4.1.465.2.1.1 |
plxFtMaxRemoveWhen the filter table is full and new entries need to
be made, the oldest plxFtMaxRemove number of entries
are removed.rw INTEGER .1.3.6.1.4.1.465.2.1.2 |
plxFtMaxFilterSize of the filter table.ro INTEGER .1.3.6.1.4.1.465.2.1.3 |
plxFtAgeTimeFilter table age timer interval. The filter entry
age is incremented every plxFtAgeTime seconds.rw INTEGER .1.3.6.1.4.1.465.2.1.4 |
plxFtMaxPermMax number of permanent filter table entries.
Setting this value to zero clears all permanent
and dynamic entries from the filter table. Any
other set is ignored.rw INTEGER .1.3.6.1.4.1.465.2.1.5 |
plxFtForwMBcastEnable or disable forwarding of broadcasts
and multicasts.rw Enumeration .1.3.6.1.4.1.465.2.1.6 |
plxFtSecureModeEnable or disable 'secure' mode. In 'secure' mode the
bridge does not learn filter table entries dynamically.rw Enumeration .1.3.6.1.4.1.465.2.1.7 |
plxFtEntry OBJECT IDENTIFIER .1.3.6.1.4.1.465.2.2 |
plxFtAgeFilter table entry age. Instance is a six element
object identifier representing the MAC address.rw INTEGER .1.3.6.1.4.1.465.2.2.1 |
plxFtDispFilter table entry disposition. Instance is a six element
object identifier representing the MAC address.rw Enumeration .1.3.6.1.4.1.465.2.2.2 |
plxInterfaceErrors OBJECT IDENTIFIER .1.3.6.1.4.1.465.3 |
plxIfeInBusErrBus read errors (Ethernet chip error).ro Counter .1.3.6.1.4.1.465.3.1 |
plxIfeInShortPktShort frames received.ro Counter .1.3.6.1.4.1.465.3.2 |
plxIfeInAlgErrorFrames received with bad alignment.ro Counter .1.3.6.1.4.1.465.3.3 |
plxIfeInBadSizeFrames received with bad length.ro Counter .1.3.6.1.4.1.465.3.4 |
plxIfeInOverflowReceive buffer overflow errors.ro Counter .1.3.6.1.4.1.465.3.5 |
plxIfeInCRCErrFrames received with CRC errors.ro Counter .1.3.6.1.4.1.465.3.6 |
plxIfeOutCol16Frames discarded due to excess collisions.ro Counter .1.3.6.1.4.1.465.3.7 |
plxIfeOutColTransmit collisions.ro Counter .1.3.6.1.4.1.465.3.8 |
plxIfeOutShortPktShort packets transmitted (Ethernet chip error).ro Counter .1.3.6.1.4.1.465.3.9 |
plxIfeOutUnderflowTransmit buffer underflow.ro Counter .1.3.6.1.4.1.465.3.10 |
plxIfeOutBusErrBus write errors (Ethernet chip error).ro Counter .1.3.6.1.4.1.465.3.11 |
plxForwardCounters OBJECT IDENTIFIER .1.3.6.1.4.1.465.4 |
plxFcInOctetsReceived bytes.ro Counter .1.3.6.1.4.1.465.4.1 |
plxFcInPktsReceived frames.ro Counter .1.3.6.1.4.1.465.4.2 |
plxFcInNUcastPktsReceived multicast and broadcast frames.ro Counter .1.3.6.1.4.1.465.4.3 |
plxFcForwOctetsForwarded bytes.ro Counter .1.3.6.1.4.1.465.4.4 |
plxFcForwPktsForward frames.ro Counter .1.3.6.1.4.1.465.4.5 |
plxFcFiltOctetsFiltered bytes.ro Counter .1.3.6.1.4.1.465.4.6 |
plxFcFiltPktsFiltered frames.ro Counter .1.3.6.1.4.1.465.4.7 |
plxSystemCounters OBJECT IDENTIFIER .1.3.6.1.4.1.465.5 |
plxSysMemFreeAmount of memory free of a particular size. Instance is
the memory block size.ro Counter .1.3.6.1.4.1.465.5.1 |
plxSysMemAllocFailNumber of times an allocation of a particular size
was denied due to no buffers. Instance is the buffer
size.ro Counter .1.3.6.1.4.1.465.5.2 |
plxSysMemTotAllocFailTotal number of memory allocation failures.ro Counter .1.3.6.1.4.1.465.5.3 |
plxSysMemFreeFailCount of deallocation failures due to inconsistent
function arguments.ro Counter .1.3.6.1.4.1.465.5.4 |
plxSysMemAllocTooBigNumber of times a memory allocation was denied because
the buffer size was too large.ro Counter .1.3.6.1.4.1.465.5.5 |
plxSysTimeToResetAmount of time (seconds) until the agent will reset.
Setting this to any non-zero value will cause a reset.rw Counter .1.3.6.1.4.1.465.5.6 |
plxSysPanicMesgThe message printed on the console before the last system
crash, or a probable cause of the last crash.ro DisplayString .1.3.6.1.4.1.465.5.7 |
plxSysResetCountNumber of times the device has been reset (not including
power recycles).ro Counter .1.3.6.1.4.1.465.5.8 |
plxSysSoftwareVersionThe version of software currently functioning in the system.ro DisplayString .1.3.6.1.4.1.465.5.10 |
plxSpanningTree OBJECT IDENTIFIER .1.3.6.1.4.1.465.6 |
plxStBridge OBJECT IDENTIFIER .1.3.6.1.4.1.465.6.1 |
plxStBrNamePrintable bridge name.rw OCTET STRING .1.3.6.1.4.1.465.6.1.1 |
plxStBrIdentBridge identifier (8 bytes).rw OCTET STRING .1.3.6.1.4.1.465.6.1.2 |
plxStBrMaxAgeBridge default 802.1 Max Age parameter.rw INTEGER .1.3.6.1.4.1.465.6.1.3 |
plxStBrHelloTimeBridge default 802.1 Hello Time parameter.rw INTEGER .1.3.6.1.4.1.465.6.1.4 |
plxStBrForwDelayBridge default 802.1 Forward Delay parameter.rw INTEGER .1.3.6.1.4.1.465.6.1.5 |
plxStBrIsRootFlag indicating if the bridge is the root.ro Enumeration .1.3.6.1.4.1.465.6.1.6 |
plxStBrIsDesigFlag indicating if the bridge is designated for a LAN.ro Enumeration .1.3.6.1.4.1.465.6.1.7 |
plxStBrSpanAddrMAC address used by the Spanning Tree Protocol for
sending and receiving Config and Topology change frames.ro OCTET STRING .1.3.6.1.4.1.465.6.1.8 |
plxStBrPriority802.1 Bridge Priority parameter.rw INTEGER .1.3.6.1.4.1.465.6.1.9 |
plxStBrSTPDisabledFlag used to enable or disable 802.1 Spanning Tree Protocol
operation.rw Enumeration .1.3.6.1.4.1.465.6.1.10 |
plxStRoot OBJECT IDENTIFIER .1.3.6.1.4.1.465.6.2 |
plxStRtIdentRoot 802.1 Bridge Identifier.ro OCTET STRING .1.3.6.1.4.1.465.6.2.1 |
plxStRtCostRoot path cost.ro INTEGER .1.3.6.1.4.1.465.6.2.2 |
plxStRtPortRoot port number.ro Enumeration .1.3.6.1.4.1.465.6.2.3 |
plxStRtMaxAgeRoot 802.1 Max Age parameter.ro INTEGER .1.3.6.1.4.1.465.6.2.4 |
plxStRtHelloTimeRoot 802.1 Hello Time parameter.ro INTEGER .1.3.6.1.4.1.465.6.2.5 |
plxStRtForwDelayRoot 802.1 Forward Delay parameter.ro INTEGER .1.3.6.1.4.1.465.6.2.6 |
plxStPort OBJECT IDENTIFIER .1.3.6.1.4.1.465.6.3 |
plxStPrtState802.1 Port State.rw Enumeration .1.3.6.1.4.1.465.6.3.1 |
plxStPrtCost802.1 Port cost parameter.ro INTEGER .1.3.6.1.4.1.465.6.3.2 |
plxStPrtIsDesigFlag indicating if this port is designated.ro Enumeration .1.3.6.1.4.1.465.6.3.3 |
plxStPrtIsRootFlag indicating if this is the root port.ro Enumeration .1.3.6.1.4.1.465.6.3.4 |
plxStPrtDesigRoot802.1 Bridge Identifier of the Designated Root
for this port.ro OCTET STRING .1.3.6.1.4.1.465.6.3.5 |
plxStPrtDesigCostDesignated cost for this port.ro INTEGER .1.3.6.1.4.1.465.6.3.6 |
plxStPrtDesigBridgeDesignated bridge for this port.ro OCTET STRING .1.3.6.1.4.1.465.6.3.7 |
plxStPrtDesigPortDesignated port.ro INTEGER .1.3.6.1.4.1.465.6.3.8 |
plxStPrtPriorityPort priority.ro INTEGER .1.3.6.1.4.1.465.6.3.9 |
plxSpanTreeStats OBJECT IDENTIFIER .1.3.6.1.4.1.465.6.4 |
plxStsTopoChangesTopology changes detected.ro Counter .1.3.6.1.4.1.465.6.4.1 |
plxStsConfigTimeoutConfiguration timeouts.ro Counter .1.3.6.1.4.1.465.6.4.2 |
plxStsPortDisableCount of port disables.ro Counter .1.3.6.1.4.1.465.6.4.3 |
plxStsPortEnableCount of port enables.ro Counter .1.3.6.1.4.1.465.6.4.4 |
plxStsInBadLen802.1 frames received with bad length.ro Counter .1.3.6.1.4.1.465.6.4.5 |
plxStsInUnknown802.1 frames received with bad frame type.ro Counter .1.3.6.1.4.1.465.6.4.6 |
plxStsIn8021Man802.1 Management frames received (discarded by bridge).ro Counter .1.3.6.1.4.1.465.6.4.7 |
plxStsInConfig802.1 Config frames received.ro Counter .1.3.6.1.4.1.465.6.4.8 |
plxStsInTopoChg802.1 Topology change notification frames received.ro Counter .1.3.6.1.4.1.465.6.4.9 |
plxStsOutConfig802.1 Config frames sent.ro Counter .1.3.6.1.4.1.465.6.4.10 |
plxStsOutTopoChg802.1 Topology change notification frames sent.ro Counter .1.3.6.1.4.1.465.6.4.11 |
plxFilterRange OBJECT IDENTIFIER .1.3.6.1.4.1.465.7 |
plxFrNumRangeThe maximum number of filter range table entries when read
(GET). Set to zero to delete all filter range table entries.
A set with any other value is ignored.rw INTEGER .1.3.6.1.4.1.465.7.1 |
plxFrEntryFilter range table entry. Instance is the range table number
(1 to plxFrNumRange). Each entry has the following format:
uchar frLowDest[6]; /* low bound of destination */
uchar frLowSrc[6]; /* low bound of source */
ushort frLowType; /* low bound of type */
uchar frHighDest[6]; /* high bound of destination */
uchar frHighSrc[6]; /* high bound of source */
ushort frHighType; /* high bound of type */
uchar frflag; /* disposition flag */
unchar frfill; /* round up size */
The LowType and HighType are in network byte order
(Motorola 68K). The flag is one of the bridge filter
table disposition values.rw OCTET STRING .1.3.6.1.4.1.465.7.2 |
plxPlexcomProp OBJECT IDENTIFIER .1.3.6.1.4.1.465.9 |
plxPlexAsyncPlexcom 8090 proprietary management frame. Instance is '0'.
This info is available in published form by using
the 'plxHub' variables.rw OCTET STRING .1.3.6.1.4.1.465.9.1 |
plxPlexStatStatus of Plexcom 8090 management module as deduced by
response to poll. Instance is '0'.ro Enumeration .1.3.6.1.4.1.465.9.2 |
plxPlexBkBitsPlexcom 8091 proprietary management frame. Instance is '0'.
This info is available in a decoded form by using the 'plxHub'
variables.
Structure for SET (size 104):
#define MAX_SLOTS 13
#define SLOT_INFO_SIZE 8
char module_set_prop[MAX_SLOTS][SLOT_INFO_SIZE]
Structure for GET (size 208):
char module_set_prop[MAX_SLOTS][SLOT_INFO_SIZE]
char module_get_prop[MAX_SLOTS][SLOT_INFO_SIZE]
Contents of 'module_set_prop' and 'module_get_prop' is
proprietary.rw OCTET STRING .1.3.6.1.4.1.465.9.3 |
plxPlexBkDefPlexcom module definition. Instance is module type,
'plxGroupType'.rw OCTET STRING .1.3.6.1.4.1.465.9.4 |
plxHub OBJECT IDENTIFIER .1.3.6.1.4.1.465.10 |
plxHmBasicHubTableTable containing global info for a hub. SEQUENCE OF PlxHmBasicHubEntry .1.3.6.1.4.1.465.10.1 |
plxHmBasicHubEntry PlxHmBasicHubEntry .1.3.6.1.4.1.465.10.1.1 |
plxHubBasicIDHub ID (MAC address of management port).ro OCTET STRING .1.3.6.1.4.1.465.10.1.1.1 |
plxHubGroupCapacityThe number of slots available in the hub.ro INTEGER .1.3.6.1.4.1.465.10.1.1.2 |
plxHubGroupMapA sequence of bytes defining which hub slots are
populated with groups (cards or groups). The first byte
of the sequence represents slot 1, the second byte
slot 2, etc. A value of '1' indicates presence of a group
and '0' indicates an absence.ro OCTET STRING .1.3.6.1.4.1.465.10.1.1.3 |
plxHubGroupCountThe number of groups currently active in the hub.ro INTEGER .1.3.6.1.4.1.465.10.1.1.4 |
plxHmBasicGroupTableA table of info for each hub module. SEQUENCE OF PlxHmBasicGroupEntry .1.3.6.1.4.1.465.10.2 |
plxHmBasicGroupEntry PlxHmBasicGroupEntry .1.3.6.1.4.1.465.10.2.1 |
plxGroupHubBasicIDHub identifier (MAC address of management port).ro OCTET STRING .1.3.6.1.4.1.465.10.2.1.1 |
plxGroupBasicIDGroup identifier (module or slot number). First (left/bottom)
slot is 1.ro Enumeration .1.3.6.1.4.1.465.10.2.1.2 |
plxGroupNumberOfPortsNumber of ports in this group.ro INTEGER .1.3.6.1.4.1.465.10.2.1.3 |
plxGroupTypeGroup (module) type.ro Enumeration .1.3.6.1.4.1.465.10.2.1.4 |
plxGroupAutoPartStateA sequence of bytes defining the auto-partition state
of each port. The first byte corresponds to port 1, the
second byte to port 2, etc. The value of each element
is of the same type as the 'plxPortAutoPartState' variable.ro OCTET STRING .1.3.6.1.4.1.465.10.2.1.5 |
plxGroupAdminStateA sequence of bytes defining the enable state of each
port. The first byte corresponds to port 1, the second
byte to port 2, etc. The value of each element is of the
same type as the 'plxPortAdminState' variable.rw OCTET STRING .1.3.6.1.4.1.465.10.2.1.6 |
plxGroupCascadeConfigAn integer defining the configuration control of bussed
cascade networks. For PlexNet SX products, this variable
is only applicable to 23SX, 24SX, 27SX, etc. modules, and
not the 91SX, 29SX, etc. modules. A value of '1' is returned
for modules which don't support the variable. A '2' indicates
local configuration, meaning the hardware switch has been set
on the board to control the cascade network based on hardware
switches, and to disallow setting of the cascade network
by remote management. A value of '3' indicates remote
configuration, meaning the hardware switch is set to allow
remote configuration of the cascade networks.ro Enumeration .1.3.6.1.4.1.465.10.2.1.7 |
plxGroupCascadeNetworkA sequence of bytes defining the selected bussed cascade
network. A value of '9' indicates no cascade network
selected. This can be SET only on device types. A
value of '1' through '4' indicates the selected cascade
network. A value of '8' (SET only) is used to set the
device to use its hardware switches to select the
cascade network. For PlexNet 8091SX and 8029SX type
modules, the first byte represents port 1's internal network
and the second byte port 2's internal network. A value of '10'
(hex a) is returned for any module which does not support
bussed cascade networks.rw OCTET STRING .1.3.6.1.4.1.465.10.2.1.8 |
plxGroupLinkStateA sequence of bytes defining the link state of each port.
The first byte corresponds to port 1, the second byte to
port 2, etc. The value of each element is of the same type
as the 'plxPortLinkState' variable.ro OCTET STRING .1.3.6.1.4.1.465.10.2.1.9 |
plxGroupLinkPartTrapEnableA sequence of bytes defining the enabling state for
generation of link and partition change traps from each
port. The first byte corresponds to port 1, the second
byte to port 2, etc. A value of '2' indicates trap generation
for the corresponding port is disabled and a value of '3'
indicates enabled.rw OCTET STRING .1.3.6.1.4.1.465.10.2.1.10 |
plxGroupNetworkSegmentThe network segment that the corresponding group is
currently operating on. This is the 'repeater' number
used when accessing statistical information from the
agent via other standard MIBs. The value '255' (hex ff)
is returned if not applicable.ro OCTET STRING .1.3.6.1.4.1.465.10.2.1.11 |
plxGroupChassisNoThe number or id of the physical enclosure that the
corresponding group is operating in. This variable maps
a logical grouping of ports into a physical grouping.
The value '1' is returned for systems in which all groups
reside in the same physical enclosure.ro INTEGER .1.3.6.1.4.1.465.10.2.1.12 |
plxHmBasicPortTableA table of info for the ports within a hub module.
The instance of each element is 'GroupID.PortID'. For
example, the Admin State of port 3 of slot 2 is
'plxPortAdminState.2.3'. SEQUENCE OF PlxHmBasicPortEntry .1.3.6.1.4.1.465.10.3 |
plxHmBasicPortEntry PlxHmBasicPortEntry .1.3.6.1.4.1.465.10.3.1 |
plxPortHubBasicIDHub identifier (MAC address of management port).ro OCTET STRING .1.3.6.1.4.1.465.10.3.1.1 |
plxPortGroupBasicIDGroup identifier (module or slot number). First slot is 1.ro Enumeration .1.3.6.1.4.1.465.10.3.1.2 |
plxPortBasicIDPort identifier (number). First port is the leftmost or
topmost port of a card and is number 1.ro Enumeration .1.3.6.1.4.1.465.10.3.1.3 |
plxPortMauTypePort physical interface type.ro Enumeration .1.3.6.1.4.1.465.10.3.1.4 |
plxPortAdminStatePort enable state.rw Enumeration .1.3.6.1.4.1.465.10.3.1.5 |
plxPortAutoPartStatePort auto-partition state.ro Enumeration .1.3.6.1.4.1.465.10.3.1.6 |
plxPortLinkStatePort link state.ro Enumeration .1.3.6.1.4.1.465.10.3.1.7 |
plxSystemAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.465.11 |
plxSysAdmCommunityTableA table of SNMP community name entries allowing different
levels of SNMP access. A maximum of 5 entries are allowed. SEQUENCE OF PlxSysAdmCommunityEntry .1.3.6.1.4.1.465.11.1 |
plxSysAdmCommunityEntryAn entry in the SNMP community table. PlxSysAdmCommunityEntry .1.3.6.1.4.1.465.11.1.1 |
plxCommunityIndexA unique index for this community table entry.ro INTEGER .1.3.6.1.4.1.465.11.1.1.1 |
plxCommunityNameThe community name to which this entry grants access.
This string must be unique among the community names
defined in all entries of this table. A community name
entry does not become effective until the corresponding
plxCommunityAccess variable is set to a value other than
invalid(100).rw DisplayString .1.3.6.1.4.1.465.11.1.1.2 |
plxCommunityAccessThe access level for the community name. This variable
must be set to a value of readOnly(1), readWrite(2), or
superUser(3) for the corresponding plxCommunityName variable
in the table to be valid. A value of readOnly(1) allows
'GET' only privleges on all MIB objects except the community
table. A value of readWrite(2) allows 'GET' and 'SET'
privleges on all MIB objects except the community table.
A value of superUser(3) allows 'GET' and 'SET' privleges on
all MIB objects including the community table. The value
invalid(100) is returned for invalid table entries. A
'SET' with this value clears the entry from the table.rw Enumeration .1.3.6.1.4.1.465.11.1.1.3 |
plxSysAdmDownload OBJECT IDENTIFIER .1.3.6.1.4.1.465.11.2 |
plxDownloadFileNameName of the file to download via the network to Flash.rw DisplayString .1.3.6.1.4.1.465.11.2.1 |
plxDownloadServerAddressThe IP address of the server that contains the file to
download.rw DisplayString .1.3.6.1.4.1.465.11.2.2 |
plxDownloadActionSetting this object to download(2) initiates a download of
system software. The variables plxDownloadServerAddress and
plxDownloadFileName must be first set before starting a
download. The agent will return the value download(2) when
a download is currently in progress. Setting this object to
noDownload(1) has no effect. The agent will return this value
unless a download is in progress.rw Enumeration .1.3.6.1.4.1.465.11.2.3 |
plxDownloadStatusThe status of the last download performed. The value
downloadSuccess(1) indicates a successful download, and that
the device is operating from the downloaded firmware.
noDownloadOccurred(2) is returned if no firmware download has yet
been performed. If Flash EPROM is not present on the board
or is bad, badFlash(3) is returned. The value
badServerAddress(4) indicates the IP address of the server
configured by the plxDownloadServerAddress variable is bad.
badFile(5) indicates the downloaded file had a bad checksum
or is corrupt. The value downloadInProgress(14) indicates that
a download is currently being performed. The remaining values
indicate a TFTP protocol specific failure during the most recent
download, and are the error codes defined in RFC 783, offset
by six.ro Enumeration .1.3.6.1.4.1.465.11.2.4 |
plxSysAdmTrapTable SEQUENCE OF PlxSysAdmTrapEntry .1.3.6.1.4.1.465.11.3 |
plxSysAdmTrapEntry PlxSysAdmTrapEntry .1.3.6.1.4.1.465.11.3.1 |
plxTrapIndexThis object identifies the entry within the trap table.ro INTEGER .1.3.6.1.4.1.465.11.3.1.1 |
plxTrapStandardEnableEnable or disable generation of standard traps for this
entry.rw Enumeration .1.3.6.1.4.1.465.11.3.1.4 |
plxTrapPlexcomEnableEnable or disable Plexcom specific trap generation
for this entry.rw Enumeration .1.3.6.1.4.1.465.11.3.1.5 |
plxTrapRepeaterEnableEnable or disable Repeater MIB specific trap generation
for this entry.rw Enumeration .1.3.6.1.4.1.465.11.3.1.6 |
plxTrapNovellEnableEnable or disable Novell HMI MIB specific trap generation
for this entry.rw Enumeration .1.3.6.1.4.1.465.11.3.1.7 |
plxSysAdmMibControl OBJECT IDENTIFIER .1.3.6.1.4.1.465.11.4 |
plxMcZeroStatCountersZero statistical counters maintained by the managed device.
This zeros the port- and network-level performance stats
maintained in all MIBs supported by the device. The variable
should be set to 'zeroCounters' to clear statistical entries.
A value of 'noZero' is returned when this variable is read.rw Enumeration .1.3.6.1.4.1.465.11.4.1 |
plxMcNetworkSelectRptrMibSelect the 'repeater number' that the information in the
Repeater MIB on the managed device represents. This variable
is used for agents which manage multiple repeaters.rw INTEGER .1.3.6.1.4.1.465.11.4.2 |
plxMcNetworkSelectRmonMibSelect the 'repeater number' that the information in the
RMON MIB on the managed device represents. This variable
is used for agents which manage multiple repeaters.rw INTEGER .1.3.6.1.4.1.465.11.4.3 |
plxSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.465.12 |
plxIntruderControlGroupTableA table of parameters for configuring software-controlled
intruder detection for groups of ports. SEQUENCE OF PlxIntruderControlGroupEntry .1.3.6.1.4.1.465.12.1 |
plxIntruderControlGroupEntryAn entry in the intruder detection group table. PlxIntruderControlGroupEntry .1.3.6.1.4.1.465.12.1.1 |
plxIcGroupGroupIndexA unique group index for which this intruder control table
entry represents.ro INTEGER .1.3.6.1.4.1.465.12.1.1.1 |
plxIcGroupAuthorizationTypeThe authorization level of the intruder detection on the
corresponding group of ports. If set to singleUser(2) (the
initial default), alarms will be triggered when more than
one source address is detected on a given port. If set to
noUser(1), no users are allowed on any port, and an alarm
will be triggered if any traffic is generated on a port.rw Enumeration .1.3.6.1.4.1.465.12.1.1.2 |
plxIcGroupAlarmActionThe action to be taken when an alarm occurs on any port in
the corresponding group. If this variable is set to trapOnly(2),
the initial default, an SNMP trap will be generated when an
intruder detect alarm occurs. If set to disableOnly(3), the
port will be disabled when an alarm occurs. If set to
trapAndDisable(4), both a trap will be generated and the port
will be disabled. If set to none(1), no action will be taken.rw Enumeration .1.3.6.1.4.1.465.12.1.1.3 |
plxIcGroupAuthorizedAddressModeThe method by which the plxIcAuthorizedSourceAddress
variable for the corresponding port should be configured. If
this variable is set to autoLearn(1), the initial default, the
allowed single source address on the port will be configured
automatically by the address of the next valid packet on that
port. If set to useAuthorized(2), the address as configured by
an SNMP SET operation on the plxIcAuthorizedSourceAddress
variable will be used.rw Enumeration .1.3.6.1.4.1.465.12.1.1.4 |
plxIcGroupDetectionStatusThe current status of the intruder detection on the
corresponding port. The initial default for all ports is
inactive(1), meaning that intruder detection is not active
on the port. If set to active(2), intruder detection is
enabled, and this value will then also be returned for an
SNMP GET operation. If an alarm is generated, this variable
will take on the value triggered(3). A set with the value
active(2) will clear the triggered condition back to active.
Intruder detection on the port is effectively still active in
the triggered condition. The value triggered(3) is illegal
for a SET operation.rw Enumeration .1.3.6.1.4.1.465.12.1.1.5 |
plxIntruderControlTableA table of parameters for configuring software-controlled
intruder detection. SEQUENCE OF PlxIntruderControlEntry .1.3.6.1.4.1.465.12.2 |
plxIntruderControlEntryAn entry in the intruder detection table. PlxIntruderControlEntry .1.3.6.1.4.1.465.12.2.1 |
plxIcGroupIndexA unique group index for which this intruder control table
entry represents.ro INTEGER .1.3.6.1.4.1.465.12.2.1.1 |
plxIcPortIndexA unique port index for which this intruder control table
entry represents.ro INTEGER .1.3.6.1.4.1.465.12.2.1.2 |
plxIcAuthorizationTypeThe authorization level of the intruder detection on the
corresponding port. If set to singleUser(2) (the initial
default), an alarm will be triggered when more than one source
address is detected on the port. If set to noUser(1), no
users are allowed on the port, and an alarm will be triggered
if any traffic is generated on the port.rw Enumeration .1.3.6.1.4.1.465.12.2.1.3 |
plxIcAlarmActionThe action to be taken when an alarm occurs on the
corresponding port. If this variable is set to trapOnly(2),
the initial default, an SNMP trap will be generated when an
intruder detect alarm occurs. If set to disableOnly(3), the
port will be disabled when an alarm occurs. If set to
trapAndDisable(4), both a trap will be generated and the port
will be disabled. If set to none(1), no action will be taken.rw Enumeration .1.3.6.1.4.1.465.12.2.1.4 |
plxIcAuthorizedAddressModeThe method by which the plxIcAuthorizedSourceAddress
variable for the corresponding port should be configured. If
this variable is set to autoLearn(1), the initial default, the
allowed single source address on the port will be configured
automatically by the address of the next valid packet on that
port. If set to useAuthorized(2), the address as configured by
an SNMP SET operation on the plxIcAuthorizedSourceAddress
variable will be used.rw Enumeration .1.3.6.1.4.1.465.12.2.1.5 |
plxIcAuthorizedSourceAddressThe current authorized source address allowed by intruder
detection on the corresponding port. This variable is only
valid if the plxIcAuthorizationType variable for the port
is singleUser(2). This variable must be configured if the
plxIcAuthorizedAddressMode variable is set to useAuthorized.
If plxIcAuthorizedAddressMode is set to autoLearn, the
authorized source address will be automatically configured to be
the source address of the last valid packet that was generated
from the port (or the next valid packet if the port has had no
traffic) after setting the plxIcDetectionStatus variable to
active(2).rw OCTET STRING .1.3.6.1.4.1.465.12.2.1.6 |
plxIcCurrentSourceAddressThe source address of the last valid packet that was generated
on the corresponding port. If an alarm was generated on the
port and the port was disabled based on the setting of
plxIcAlarmAction, this variable will contain the source
address of the intruding device.ro OCTET STRING .1.3.6.1.4.1.465.12.2.1.7 |
plxIcDetectionStatusThe current status of the intruder detection on the
corresponding port. The initial default for all ports is
inactive(1), meaning that intruder detection is not active
on the port. If set to active(2), intruder detection is
enabled, and this value will then also be returned for an
SNMP GET operation. If an alarm is generated, this variable
will take on the value triggered(3). A set with the value
active(2) will clear the triggered condition back to active.
Intruder detection on the port is effectively still active in
the triggered condition. The value triggered(3) is illegal
for a SET operation.rw Enumeration .1.3.6.1.4.1.465.12.2.1.8 |