Home/Catalog/PHIHONG-PoE-MIB

PHIHONG-PoE-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

Detailed view of the defined objects, syntax rules, and hierarchical paths.

Objects

Active

Status

Dependencies

Imported Objects

SNMPv2-SMI

SNMPv2-TC

Objects

52 total

Object Name	Syntax	OID
phihong OBJECT IDENTIFIER `.1.3.6.1.4.1.24852`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.24852`
poeProduct OBJECT IDENTIFIER `.1.3.6.1.4.1.24852.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.24852.2`
poeProductsPartthe POE controller Part.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.24852.2.1`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.24852.2.1`
poeSystem OBJECT IDENTIFIER `.1.3.6.1.4.1.24852.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.24852.2.2`
poeSystemActionHubResetReset the POE controller.rw Enumeration `.1.3.6.1.4.1.24852.2.2.1`	Enumeration	`.1.3.6.1.4.1.24852.2.2.1`
poeSystemActionHubRestoreFactoryDefaultRestore Factory Default to flash. resetpassword means when users forget the password,they can use this entry, and all of the snmp module parameters will be set to default values.rw Enumeration `.1.3.6.1.4.1.24852.2.2.2`	Enumeration	`.1.3.6.1.4.1.24852.2.2.2`
poeSystemActionHubSaveConfigurationSave the POE parameters to flashrw Enumeration `.1.3.6.1.4.1.24852.2.2.3`	Enumeration	`.1.3.6.1.4.1.24852.2.2.3`
poeSystemAllPortPowerEnableEnables power supply in all port. Setting this object at a value enable(2) enables power and detection mechanism for all port. Setting this object at a value disable(1) disables power for all port.rw Enumeration `.1.3.6.1.4.1.24852.2.2.4`	Enumeration	`.1.3.6.1.4.1.24852.2.2.4`
poeSystemHWVersionSystem hardware version for the Main boardro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.24852.2.2.6`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.24852.2.2.6`
poeSystemNumberOfChannelNumber of ports in the systemro INTEGER `.1.3.6.1.4.1.24852.2.2.7`	INTEGER	`.1.3.6.1.4.1.24852.2.2.7`
poeSystemProductPartNumberSystem Part Number for PowerHubro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.24852.2.2.8`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.24852.2.2.8`
poeSystemFirmwareVersionSystem firmware version for the POEro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.24852.2.2.10`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.24852.2.2.10`
poeSystemDescriptionSystem Description 10 charactersrw DisplayString `.1.3.6.1.4.1.24852.2.2.11`	DisplayString	`.1.3.6.1.4.1.24852.2.2.11`
poeSystemConsumptionPowerMeasured usage power expressed in Watts.ro INTEGER UNITS "Watts" `.1.3.6.1.4.1.24852.2.2.12`	INTEGER UNITS "Watts"	`.1.3.6.1.4.1.24852.2.2.12`
poeSystemControlACPowerdescribes the maximum available power in Watts to be supplied by the AC backup source to this device.rw INTEGER UNITS "Watts" `.1.3.6.1.4.1.24852.2.2.13`	INTEGER UNITS "Watts"	`.1.3.6.1.4.1.24852.2.2.13`
poeSystemControlDCPowerdescribes the maximum available power in Watts to be supplied by the DC backup source to this device.rw INTEGER UNITS "Watts" `.1.3.6.1.4.1.24852.2.2.14`	INTEGER UNITS "Watts"	`.1.3.6.1.4.1.24852.2.2.14`
poeSystemControlBothPowerdescribes the maximum available power in Watts to be supplied by Both AC and DC backup source to this device.rw INTEGER UNITS "Watts" `.1.3.6.1.4.1.24852.2.2.15`	INTEGER UNITS "Watts"	`.1.3.6.1.4.1.24852.2.2.15`
poeSystemParameters1st char:Knokoff enable,2nd char:AC Disconnect enable,3th char:Disable Power Managementrw DisplayString `.1.3.6.1.4.1.24852.2.2.16`	DisplayString	`.1.3.6.1.4.1.24852.2.2.16`
poeSystemSnmpVersionThe software version for the SNMP devicero DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.24852.2.2.17`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.24852.2.2.17`
poeSystemPerPortPowerEnableEnables power supply in all port. Setting this object at a value enable(2) enables power and detection mechanism for all port. Setting this object at a value disable(1) disables power for all port.rw DisplayString `.1.3.6.1.4.1.24852.2.2.18`	DisplayString	`.1.3.6.1.4.1.24852.2.2.18`
poeSystemStatusThe status of the POE.ro Enumeration `.1.3.6.1.4.1.24852.2.2.19`	Enumeration	`.1.3.6.1.4.1.24852.2.2.19`
poePortTable SEQUENCE OF PoePortEntry `.1.3.6.1.4.1.24852.2.3`	SEQUENCE OF PoePortEntry	`.1.3.6.1.4.1.24852.2.3`
poePortEntryport entry containing data regarding a particular port PoePortEntry `.1.3.6.1.4.1.24852.2.3.1`	PoePortEntry	`.1.3.6.1.4.1.24852.2.3.1`
poePortIndexA unique value for each port.ro INTEGER `.1.3.6.1.4.1.24852.2.3.1.1`	INTEGER	`.1.3.6.1.4.1.24852.2.3.1.1`
poePortPowerEnableEnables power supply on this port. Setting this object at a value enable(2) enables power and detection mechanism for this port. Setting this object at a value disable(1) disables power for this port.rw Enumeration `.1.3.6.1.4.1.24852.2.3.1.2`	Enumeration	`.1.3.6.1.4.1.24852.2.3.1.2`
poePortControlMaxPowerThis command specifies the max power in [mWatts] to that port. IF you set this value it will take out this port from the auto mode. The value MUST be more then 0rw INTEGER UNITS "mWatts" `.1.3.6.1.4.1.24852.2.3.1.3`	INTEGER UNITS "mWatts"	`.1.3.6.1.4.1.24852.2.3.1.3`
poePortDescriptionPort Description 10 charactersrw DisplayString `.1.3.6.1.4.1.24852.2.3.1.6`	DisplayString	`.1.3.6.1.4.1.24852.2.3.1.6`
poePortDetectionStatusPort Detection, show the detection status of each portro Enumeration `.1.3.6.1.4.1.24852.2.3.1.7`	Enumeration	`.1.3.6.1.4.1.24852.2.3.1.7`
poePortPowerClassificationsPort Power Classifications, show the classification of each portro Enumeration `.1.3.6.1.4.1.24852.2.3.1.8`	Enumeration	`.1.3.6.1.4.1.24852.2.3.1.8`
poePortPowerDetectionControlPort Power Detection Control, enable or disable the Power Limit for Managementrw Enumeration `.1.3.6.1.4.1.24852.2.3.1.9`	Enumeration	`.1.3.6.1.4.1.24852.2.3.1.9`
poePortPowerPriorityPort Power Priority, show the priority of each portrw Enumeration `.1.3.6.1.4.1.24852.2.3.1.10`	Enumeration	`.1.3.6.1.4.1.24852.2.3.1.10`
poePortPowerPort Actual Power (in mWattes).ro INTEGER UNITS "mWattes" `.1.3.6.1.4.1.24852.2.3.1.11`	INTEGER UNITS "mWattes"	`.1.3.6.1.4.1.24852.2.3.1.11`
poePortVoltagePort Voltage (in dVoltage).ro DisplayString UNITS "dVoltage" `.1.3.6.1.4.1.24852.2.3.1.12`	DisplayString UNITS "dVoltage"	`.1.3.6.1.4.1.24852.2.3.1.12`
poePortCurrentPort Current (in mAmps).ro INTEGER UNITS "mAmps" `.1.3.6.1.4.1.24852.2.3.1.13`	INTEGER UNITS "mAmps"	`.1.3.6.1.4.1.24852.2.3.1.13`
poePortResistancePort Resistance (in ohms).ro INTEGER UNITS "ohms" `.1.3.6.1.4.1.24852.2.3.1.14`	INTEGER UNITS "ohms"	`.1.3.6.1.4.1.24852.2.3.1.14`
poePortFlags1st char:classification(0-3),2nd char:Port bypass detection enable,3th char:Port bypass classifiation enable,4th cahr:Port bypass powerup enable,5th char:Port bypass sampling enable.ro DisplayString `.1.3.6.1.4.1.24852.2.3.1.15`	DisplayString	`.1.3.6.1.4.1.24852.2.3.1.15`
poePortBypassFlags1st char:Port bypass detection enable,2nd char:Port bypass classifiation enable,3th cahr:Port bypass powerup enable,4th char:Port bypass sampling enable.rw DisplayString `.1.3.6.1.4.1.24852.2.3.1.16`	DisplayString	`.1.3.6.1.4.1.24852.2.3.1.16`
poePortUseClassificationforPowerLimitUse Port classification for power limit , enable or disable the Port classification for power limit.rw Enumeration `.1.3.6.1.4.1.24852.2.3.1.17`	Enumeration	`.1.3.6.1.4.1.24852.2.3.1.17`
poePortLegacyDetectionUse Port legacy detection , enable or disable the Port legacy detection.rw Enumeration `.1.3.6.1.4.1.24852.2.3.1.18`	Enumeration	`.1.3.6.1.4.1.24852.2.3.1.18`
poeTrapsControlTableA table of objects that display and control the Traps on a PSM device. SEQUENCE OF PoeTrapsControlEntry `.1.3.6.1.4.1.24852.2.4`	SEQUENCE OF PoeTrapsControlEntry	`.1.3.6.1.4.1.24852.2.4`
poeTrapsControlEntryA set of objects that control the Trap events. PoeTrapsControlEntry `.1.3.6.1.4.1.24852.2.4.1`	PoeTrapsControlEntry	`.1.3.6.1.4.1.24852.2.4.1`
poeTrapsControlGroupIndexThis variable uniquely identifies the group. INTEGER `.1.3.6.1.4.1.24852.2.4.1.1`	INTEGER	`.1.3.6.1.4.1.24852.2.4.1.1`
poeTrapsControlEnableEnable Traps from Agentrw Enumeration `.1.3.6.1.4.1.24852.2.4.1.2`	Enumeration	`.1.3.6.1.4.1.24852.2.4.1.2`
poeTraps OBJECT IDENTIFIER `.1.3.6.1.4.1.24852.2.5`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.24852.2.5`
poePortHWFailTrapThis trap indicate UV0v failure /UV0v Spike failure /Device A2d failure. NOTIFICATION-TYPE `.1.3.6.1.4.1.24852.2.5.1`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.24852.2.5.1`
poePortPeakOverCurrentTrapThis trap indicate peak over current failure. NOTIFICATION-TYPE `.1.3.6.1.4.1.24852.2.5.2`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.24852.2.5.2`
poePortOverloadTrapThis trap indicate overload failure. If you put at least 400mA on the output, you will see if your traps work NOTIFICATION-TYPE `.1.3.6.1.4.1.24852.2.5.3`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.24852.2.5.3`
poePortDiscoveryFailTrapThis trap indicate Discovery failure/ Discovery VA2 failure/Discovery RA2 failure/Sample Discovery A2d Failure. NOTIFICATION-TYPE `.1.3.6.1.4.1.24852.2.5.4`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.24852.2.5.4`
poePortClassificationFailTrapThis trap indicate Class Violation failure/ Classification A2d failure. NOTIFICATION-TYPE `.1.3.6.1.4.1.24852.2.5.5`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.24852.2.5.5`
poePortDisconnectTrapThis trap indicate port is disconnected. NOTIFICATION-TYPE `.1.3.6.1.4.1.24852.2.5.6`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.24852.2.5.6`
poePortVoltageFailTrapThis trap indicate if PSM Port is no voltage failure. NOTIFICATION-TYPE `.1.3.6.1.4.1.24852.2.5.7`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.24852.2.5.7`
poeSystemOverheatTrapThis trap indicate if PSM is overheat. NOTIFICATION-TYPE `.1.3.6.1.4.1.24852.2.5.8`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.24852.2.5.8`