PEPLINK-BALANCE-MIB
AI MIB Summary
The PEPLINK-BALANCE-MIB provides SNMP access to monitor and manage Peplink Balance series multi-WAN routers, specifically exposing interface status, WAN link health metrics, bandwidth utilization, and active session counts for traffic balancing operations.
MIB module for Peplink Balance.
Main OID:
peplinkBalance.1.3.6.1.4.1.23695.1
50
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
50 total| Object Name |
|---|
peplinkBalanceMIB module for Peplink Balance. MODULE-IDENTITY .1.3.6.1.4.1.23695.1 |
balanceStatus OBJECT IDENTIFIER .1.3.6.1.4.1.23695.1.1 |
balanceSystem OBJECT IDENTIFIER .1.3.6.1.4.1.23695.1.1.1 |
balFirmwareBalance firmware version.ro NameString .1.3.6.1.4.1.23695.1.1.1.1 |
balSerialNumberBalance serial number.ro NameString .1.3.6.1.4.1.23695.1.1.1.2 |
balTimeBalance system time.ro NameString .1.3.6.1.4.1.23695.1.1.1.3 |
balUpTimeBalance up time (in hundredths of a second) since the system was last re-initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.23695.1.1.1.4 |
balanceLan OBJECT IDENTIFIER .1.3.6.1.4.1.23695.1.1.1.6 |
balLanStatusBalance LAN status (up/down).ro NameString .1.3.6.1.4.1.23695.1.1.1.6.1 |
balLanIpBalance LAN IP address.ro IpAddress .1.3.6.1.4.1.23695.1.1.1.6.2 |
balLanSubnetMaskBalance LAN sub-net mask.ro IpAddress .1.3.6.1.4.1.23695.1.1.1.6.3 |
balLinkStatus OBJECT IDENTIFIER .1.3.6.1.4.1.23695.1.1.2 |
balLinkNumberThe number of network interfaces (regardless of their current state) present on this system.ro Counter32 .1.3.6.1.4.1.23695.1.1.2.1 |
linkTableA list of link status. SEQUENCE OF LinkStatusEntry .1.3.6.1.4.1.23695.1.1.2.2 |
linkEntryAn entry containing management information applicable to a particular interface. LinkStatusEntry .1.3.6.1.4.1.23695.1.1.2.2.1 |
linkConnNumVirtual WAN index number (1-based, unique). ConnectionNum .1.3.6.1.4.1.23695.1.1.2.2.1.1 |
linkNameBalance link status (connecting/connected/link down).ro NameString .1.3.6.1.4.1.23695.1.1.2.2.1.2 |
linkStatusBalance link status (connecting/connected/link down).ro NameString .1.3.6.1.4.1.23695.1.1.2.2.1.3 |
linkThroughputInThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of balanceWanCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.23695.1.1.2.2.1.4 |
linkThroughputOutThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of balanceWanCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.23695.1.1.2.2.1.5 |
linkDataTransferredThe numbe of bytes transferred through.ro Counter64 .1.3.6.1.4.1.23695.1.1.2.2.1.6 |
linkIpTableA list of link status. SEQUENCE OF LinkIpEntry .1.3.6.1.4.1.23695.1.1.2.3 |
linkIpEntryAn entry containing management information applicable to a particular interface. LinkIpEntry .1.3.6.1.4.1.23695.1.1.2.3.1 |
linkIpConnNumVirtual WAN index number. ConnectionNum .1.3.6.1.4.1.23695.1.1.2.3.1.1 |
linkIpIndexVirtual WAN index number. TableIndex .1.3.6.1.4.1.23695.1.1.2.3.1.2 |
linkIpBalance link IP address list.ro IpAddress .1.3.6.1.4.1.23695.1.1.2.3.1.3 |
wanUsageTableA list of interface entries. SEQUENCE OF WanUsageEntry .1.3.6.1.4.1.23695.1.1.3 |
wanUsageEntryAn entry containing management information applicable to a particular interface. WanUsageEntry .1.3.6.1.4.1.23695.1.1.3.1 |
wanUsageIndexPhysical WAN index number. TableIndex .1.3.6.1.4.1.23695.1.1.3.1.1 |
wanUsageThroughputInThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of balanceWanCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.23695.1.1.3.1.2 |
wanUsageThroughputOutThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of balanceWanCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.23695.1.1.3.1.3 |
wanUsageDataTransferredThe numbe of bytes transferred through.ro Counter64 .1.3.6.1.4.1.23695.1.1.3.1.4 |
balanceMaintenance OBJECT IDENTIFIER .1.3.6.1.4.1.23695.1.2 |
balRebootReboot the Balance. Write 'enable' to take effect.rw NameString .1.3.6.1.4.1.23695.1.2.1 |
balanceLanConfig OBJECT IDENTIFIER .1.3.6.1.4.1.23695.1.3 |
portLanSpeedConfigSet Balance LAN port speed (Auto/10baseT-FD/ 10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/ 1000baseTx-HD.rw PortSpeedType .1.3.6.1.4.1.23695.1.3.1 |
portWanSpeedConfigTableA list of interface entries. SEQUENCE OF PortSpeedConfigEntry .1.3.6.1.4.1.23695.1.3.2 |
portWanSpeedConfigEntryAn entry containing management information applicable to a particular interface. PortSpeedConfigEntry .1.3.6.1.4.1.23695.1.3.2.1 |
portWanSpeedConfigIndexPhysical LAN/WAN port name. TableIndex .1.3.6.1.4.1.23695.1.3.2.1.1 |
portWanSpeedConfigSet Balance WAN port speed (Auto/10baseT-FD/ 10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/ 1000baseTx-HD.rw PortSpeedType .1.3.6.1.4.1.23695.1.3.2.1.2 |
lanConfigIpSet Balance LAN IP address.rw IpAddress .1.3.6.1.4.1.23695.1.3.3 |
lanConfigSubnetMaskSet Balance LAN sub-net mask.rw IpAddress .1.3.6.1.4.1.23695.1.3.4 |
balanceConformance OBJECT IDENTIFIER .1.3.6.1.4.1.23695.1.50 |
balCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.23695.1.50.1 |
balComplianceBalance compliance groups. Unknown .1.3.6.1.4.1.23695.1.50.1.1 |
balGroups OBJECT IDENTIFIER .1.3.6.1.4.1.23695.1.50.2 |
balSystemGroupBalance system status group. Unknown .1.3.6.1.4.1.23695.1.50.2.1 |
balLinkGroupBalance system status group. Unknown .1.3.6.1.4.1.23695.1.50.2.2 |
balWanGroupBalance system status group. Unknown .1.3.6.1.4.1.23695.1.50.2.3 |
balSetGroupBalance system status group. Unknown .1.3.6.1.4.1.23695.1.50.2.4 |
More MIBs from Peplink
Browse all PeplinkMIBs →CELLULAR
The CELLULAR MIB module enables the monitoring and management of cellular network interfaces and modems, specifically tracking radio link status, signal strength (RSSI/RSRP), network registration states, and data session counters. It facilitates the retrieval of interface statistics and alarm conditions for cellular hardware to support connectivity troubleshooting and performance analysis.
25 objects→
IPSEC-VPN
The IPSEC-VPN MIB module enables the monitoring and management of IPsec Virtual Private Network tunnel states, security association parameters, and traffic statistics on network devices supporting IPsec protocols. It provides specific counters for tunnel establishment failures, packet throughput, and cryptographic session metrics to facilitate the operational verification of encrypted site-to-site or remote access connections.
18 objects→