PEAKFLOW-SP-MIB
AI MIB Summary
The PEAKFLOW-SP-MIB enables the monitoring and management of Cisco's PeakFlow SP traffic engineering and service provider network infrastructure via SNMP. It exposes critical performance metrics including application flow statistics, session counts, bandwidth utilization, and service level agreement (SLA) compliance data for deep packet inspection and traffic analysis.
Peakflow SP MIB
Main OID:
peakflowSPMIB.1.3.6.1.4.1.9694.1.4
151
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
151 total| Object Name |
|---|
peakflowSPMIBPeakflow SP MIB MODULE-IDENTITY .1.3.6.1.4.1.9694.1.4 |
peakflowSPCMI OBJECT IDENTIFIER .1.3.6.1.4.1.9694.1.4.1 |
spCollectorSP Device namero DisplayString .1.3.6.1.4.1.9694.1.4.1.1 |
spRouterRouter namero DisplayString .1.3.6.1.4.1.9694.1.4.1.2 |
spInterfaceInterface namero DisplayString .1.3.6.1.4.1.9694.1.4.1.3 |
spInterfaceIndexInterface SNMP Indexro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.4 |
spDurationDuration (in centi-seconds)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9694.1.4.1.5 |
spBGPEventThe event that caused a BGP transitionro DisplayString .1.3.6.1.4.1.9694.1.4.1.6 |
spBGPInstabilityBGP instability update countro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.7 |
spBGPTrapNameThe name of the triggered trapro DisplayString .1.3.6.1.4.1.9694.1.4.1.8 |
spBGPTrapEventThe event that triggered the trapro DisplayString .1.3.6.1.4.1.9694.1.4.1.9 |
spBGPTrapPrefixThe prefix that experienced the trap eventro DisplayString .1.3.6.1.4.1.9694.1.4.1.10 |
spBGPTrapOldAttributesThe old attributes for the affected prefixro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9694.1.4.1.11 |
spBGPTrapNewAttributesThe new attributes for the affected prefixro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9694.1.4.1.12 |
spInterfaceSpeedConfigured Interface Speed (bps)ro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.13 |
spInterfaceUsageActual interface usage (bps)ro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.14 |
spReportURLURL to view/download a reportro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9694.1.4.1.15 |
spReportNameThe name of the reportro DisplayString .1.3.6.1.4.1.9694.1.4.1.16 |
spReportIDThe queue id of the reportro DisplayString .1.3.6.1.4.1.9694.1.4.1.17 |
spAlertIDThe id of the alertro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.18 |
spHijackRouteThe BGP route prefix of the hijacking announcementro DisplayString .1.3.6.1.4.1.9694.1.4.1.19 |
spHijackAttrBGP attributes of the hijacking announcementro DisplayString .1.3.6.1.4.1.9694.1.4.1.20 |
spHijackLocalThe local prefix that matched the possibly-hijacked routero DisplayString .1.3.6.1.4.1.9694.1.4.1.21 |
spUsernameName of a Peakflow SP user account.ro DisplayString .1.3.6.1.4.1.9694.1.4.1.22 |
spVersionVersion number of the described object.ro DisplayString .1.3.6.1.4.1.9694.1.4.1.23 |
spUsageTypeType of resource usage (high/low).ro DisplayString .1.3.6.1.4.1.9694.1.4.1.24 |
spManagedObjectManaged Object namero DisplayString .1.3.6.1.4.1.9694.1.4.1.25 |
spManagedObjectFamilyManaged Object familyro DisplayString .1.3.6.1.4.1.9694.1.4.1.26 |
spThresholdConfigured thresholdro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.27 |
spUsageObserved per-object traffic usagero Unsigned32 .1.3.6.1.4.1.9694.1.4.1.28 |
spUnitUnit of measurement (bps/pps)ro DisplayString .1.3.6.1.4.1.9694.1.4.1.29 |
spHardwareFailureDescriptionDescription of hardware failurero DisplayString .1.3.6.1.4.1.9694.1.4.1.30 |
spFingerprintNameFingerprint namero DisplayString .1.3.6.1.4.1.9694.1.4.1.31 |
spFingerprintFeedbackFeedback regarding a shared fingerprintro DisplayString .1.3.6.1.4.1.9694.1.4.1.32 |
spFingerprintSenderSender of a shared fingerprintro DisplayString .1.3.6.1.4.1.9694.1.4.1.33 |
spFingerprintMessageMessage accompanying shared fingerprintro DisplayString .1.3.6.1.4.1.9694.1.4.1.34 |
spMitigationIDThe ID of the mitigation eventro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.35 |
spDNSNameDomain namero DisplayString .1.3.6.1.4.1.9694.1.4.1.36 |
spDNSExpectedExpected query countro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.37 |
spDNSObservedObserved query countro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.38 |
spDNSObservedMeanObserved mean query countro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.39 |
spDNSObservedMaxObserved max query countro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.40 |
spMitigationNameMitigation namero DisplayString .1.3.6.1.4.1.9694.1.4.1.41 |
spScriptCommandAlert script namero DisplayString .1.3.6.1.4.1.9694.1.4.1.42 |
spScriptHostHost on which alert script runsro DisplayString .1.3.6.1.4.1.9694.1.4.1.43 |
spScriptPortPort to connect to spScriptHost onro DisplayString .1.3.6.1.4.1.9694.1.4.1.44 |
spScriptStartTextual description of the time the script startedro DisplayString .1.3.6.1.4.1.9694.1.4.1.45 |
spTMSPrefixThe offramp prefix associated with the TMS mitigationro DisplayString .1.3.6.1.4.1.9694.1.4.1.46 |
spTMSCommunityThe offramp community associated with the TMS mitigation. In the event the string is longer than 255 octets, the number of communities in this object may be truncated.ro DisplayString .1.3.6.1.4.1.9694.1.4.1.47 |
spTMSTimeoutTextual representation of TMS timeout, in minutesro DisplayString .1.3.6.1.4.1.9694.1.4.1.48 |
spThirdPartyZoneThird party mitigation destination zonero DisplayString .1.3.6.1.4.1.9694.1.4.1.49 |
spThirdPartyAddrThird party mitigation destination addressro DisplayString .1.3.6.1.4.1.9694.1.4.1.50 |
spMitigationStartTextual representation of mitigation start timero DisplayString .1.3.6.1.4.1.9694.1.4.1.51 |
spBlackholeCommunityThe offramp community associated with the blackhole mitigationro DisplayString .1.3.6.1.4.1.9694.1.4.1.52 |
spBlackholeTimeoutTextual representation of blackhole timeout, in minutesro DisplayString .1.3.6.1.4.1.9694.1.4.1.53 |
spBlackholePrefixThe offramp prefix associated with the blackhole mitigationro DisplayString .1.3.6.1.4.1.9694.1.4.1.54 |
spBlackholeNexthopThe offramp next hop associated with the blackhole mitigationro DisplayString .1.3.6.1.4.1.9694.1.4.1.55 |
spFlowspecCommunityThe offramp community associated with flowspec mitigationro DisplayString .1.3.6.1.4.1.9694.1.4.1.56 |
spFlowspecTimeoutTextual representation of flowspec timeout, in minutesro DisplayString .1.3.6.1.4.1.9694.1.4.1.57 |
spCommFailureDestinationDestination of internal SP communication failurero DisplayString .1.3.6.1.4.1.9694.1.4.1.58 |
spCommFailureDescriptionDescription of internal SP communication failurero DisplayString .1.3.6.1.4.1.9694.1.4.1.59 |
spGreTunnelDestinationGRE Tunnel destinationro IpAddress .1.3.6.1.4.1.9694.1.4.1.60 |
spSystemErrorTypeTextual name of system error alert typero DisplayString .1.3.6.1.4.1.9694.1.4.1.61 |
spSystemErrorDescriptionDescription of the system error alertro DisplayString .1.3.6.1.4.1.9694.1.4.1.62 |
spServiceNameService namero DisplayString .1.3.6.1.4.1.9694.1.4.1.63 |
spServiceElementService elementro DisplayString .1.3.6.1.4.1.9694.1.4.1.64 |
spApplicationNameApplicationro DisplayString .1.3.6.1.4.1.9694.1.4.1.65 |
spAlertDetectionSignaturesA comma separated string of all alert detection signatures that make up a specific alert. May be 1 or more set, depending on the alert type.ro DisplayString .1.3.6.1.4.1.9694.1.4.1.66 |
spManagedObjectsA comma-separated list of managed object names.ro DisplayString .1.3.6.1.4.1.9694.1.4.1.67 |
spInetAddressTypeAn InetAddressType INTEGER value that specifies the type of Internet address specific in an spInetAddress object. Generally, this will be used by Peakflow SP to specify IPv4 (1) or IPv6 (2) addresses. See RFC3291 for a detailed description.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9694.1.4.1.68 |
spInetAddressAn InetAddress string that specifies an Internet address, of a type specified by spInetAddressType. See RFC3291 for a detailed description.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9694.1.4.1.69 |
spImpactBpsThe maximum observed bps of traffic for a given DoS alert type.ro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.70 |
spImpactPpsThe maximum observed pps of traffic for a given DoS alert type.ro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.71 |
spDetectedCountriesA comma separated string of ISO 3166 country codes that have been detected as part of the alert. May be 0 to 50 set. If more than 50 countries have been detected, the string will end in '...'.ro DisplayString .1.3.6.1.4.1.9694.1.4.1.72 |
spRoutingFailoverInterfacesA comma separated string of interfaces involved in failover routing.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9694.1.4.1.73 |
spPravailPravail device namero DisplayString .1.3.6.1.4.1.9694.1.4.1.74 |
spDetectorSP detector device namero DisplayString .1.3.6.1.4.1.9694.1.4.1.75 |
spTMSMultiPrefixA comma seperated list of the offramp prefixes associated with the TMS multi-prefix mitigation. This field does not include the first prefix which is included in spTMSPrefix.ro DisplayString .1.3.6.1.4.1.9694.1.4.1.76 |
spLicenseErrTypeTextual name of the license error alert typero DisplayString .1.3.6.1.4.1.9694.1.4.1.77 |
spLicenseErrCountDeployment-wide License Device Countro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.78 |
spLicenseErrLimitDeployment-wide License Device Limitro Unsigned32 .1.3.6.1.4.1.9694.1.4.1.79 |
spLicenseErrDescriptionDescription of the License alertro DisplayString .1.3.6.1.4.1.9694.1.4.1.80 |
peakflowSPMgr OBJECT IDENTIFIER .1.3.6.1.4.1.9694.1.4.2 |
deviceHealth OBJECT IDENTIFIER .1.3.6.1.4.1.9694.1.4.2.1 |
deviceCpuLoadAvg1minLoad average during last 1 minute. This value is calculated by taking the average number of processes in run queue during last 1 minute and multiplying by 100, then rounding the result into an integer.ro Integer32 .1.3.6.1.4.1.9694.1.4.2.1.1 |
deviceCpuLoadAvg5minLoad average during last 5 minutes. This value is calculated by taking the average number of processes in run queue during last 5 minutes and multiplying by 100, then rounding the result into an integer.ro Integer32 .1.3.6.1.4.1.9694.1.4.2.1.2 |
deviceCpuLoadAvg15minLoad average during last 15 minutes. This value is calculated by taking the average number of processes in run queue during last 15 minutes and multiplying by 100, then rounding the result into an integer.ro Integer32 .1.3.6.1.4.1.9694.1.4.2.1.3 |
deviceDiskUsagePercentage of primary data partition used.ro Integer32 .1.3.6.1.4.1.9694.1.4.2.1.4 |
devicePhysicalMemoryTotal physical memeory installed (in KiB).ro Integer32 .1.3.6.1.4.1.9694.1.4.2.1.5 |
devicePhysicalMemoryInUsePhysical memeory being used (in KiB).ro Integer32 .1.3.6.1.4.1.9694.1.4.2.1.6 |
devicePhysicalMemoryUsagePercentage of physical memory used.ro Integer32 .1.3.6.1.4.1.9694.1.4.2.1.7 |
deviceSwapSpaceTotal swap space available (in KiB).ro Integer32 .1.3.6.1.4.1.9694.1.4.2.1.8 |
deviceSwapSpaceInUseUsed swap space (in KiB).ro Integer32 .1.3.6.1.4.1.9694.1.4.2.1.9 |
deviceSwapSpaceUsagePercentage of swap space used.ro Integer32 .1.3.6.1.4.1.9694.1.4.2.1.10 |
deviceTotalFlowsAccumulative flow count per SP device.ro Counter32 .1.3.6.1.4.1.9694.1.4.2.1.11 |
peakflowSPTraps OBJECT IDENTIFIER .1.3.6.1.4.1.9694.1.4.3 |
peakflowSPTrapsEnumerate OBJECT IDENTIFIER .1.3.6.1.4.1.9694.1.4.3.0 |
flowDownFlow data has not been received from a Flow transmitting router NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.1 |
flowUpFlow data has resumed from a router which previously was not forwarding Flow data NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.2 |
snmpDownSNMP requests are not being answered by the router NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.3 |
snmpUpSNMP requests are again being answered by the router NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.4 |
bgpDownThe BGP session with the router has transitioned down NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.5 |
bgpUpThe BGP session with the router has transitioned up NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.6 |
collectorDownThe SP device is down. Heartbeats are missing. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.7 |
collectorUpThe SP device is up. Heartbeats have resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.8 |
collectorStartThe SP device is started. Heartbeats have been received.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.9 |
bgpInstabilityThe BGP session with this router is exhibiting instability NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.10 |
bgpInstabilityDoneThe BGP instability associated with this router has ended NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.11 |
bgpTrapA BGP event matching this trap definition has occurred. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.12 |
interfaceUsageThe interface exceeded the configured traffic rate threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.13 |
interfaceUsageDoneThe interface is now within configured traffic thresholds NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.14 |
autoclassifyStartAutoclassification started on this Peakflow SP leader.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.15 |
configChangeConfiguration updated from this Peakflow SP leader. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.16 |
notificationLimitToo many alerts have been generated by this Peakflow SP leader. Alerts will be temporarily suppressed. For more information about alerts that are being generated, please go to the Alerts page in the leader's UI.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.17 |
reportDoneThe indicated report is finished and available for viewing at the listed URL.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.18 |
bgpHijackA BGP announcement was seen for a prefix that is part of the configured local address space. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.19 |
managedObjectUsageThe managed object exceeded the configured traffic rate threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.20 |
managedObjectUsageDoneThe manged object is no longer exceeding the traffic rate threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.21 |
hardwareFailureA hardware failure has been detected on an SP device. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.22 |
hardwareFailureDoneA hardware failure is no longer detected on an SP device. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.23 |
fingerprintFeedbackFeedback received regarding a shared fingerprint. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.24 |
fingerprintReceiveA shared fingerprint was received. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.25 |
dnsBaselineAn excessive number of queries for a domain name detected. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.26 |
dnsBaselineDoneQuery count for domain name has returned to normal levels. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.27 |
alertScriptAlert script has been executed NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.28 |
mitigationDoneMitigation has completed NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.29 |
mitigationTMSStartTMS Mitigation has started NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.30 |
mitigationThirdPartyStartThird Party Mitigation has started NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.31 |
mitigationBlackholeStartBlackhole Mitigation has started NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.32 |
mitigationFlowspecStartFlowspec Mitigation has started NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.33 |
spcommFailureAn SP internal communication failure has occurred. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.34 |
spcommFailureDoneAn SP internal communication failure has ended. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.35 |
greDownThe GRE tunnel is down NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.36 |
greDownDoneThe GRE tunnel is back up NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.37 |
deviceSystemErrorAn SP device system error alert has started. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.38 |
deviceSystemErrorDoneAn SP device system error alert has ended. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.39 |
fingerprintUsageThe fingerprint exceeded the configured traffic rate threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.40 |
fingerprintUsageDoneThe fingerprint is no longer exceeding the traffic rate threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.41 |
serviceUsageThe service exceeded the configured traffic rate threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.42 |
serviceUsageDoneThe service is no longer exceeding the traffic rate threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.43 |
dosNetworkProfiledAlertThe managed object exceeded network and/or country baseline thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.44 |
dosNetworkProfiledAlertDoneThe managed object is no longer exceeding the network and/or country baseline thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.45 |
dosHostDetectionAlertA Host alert was started after one or more signatures exceeded their thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.46 |
dosHostDetectionAlertDoneThe Host alert ended and is no longer exceeding signature thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.47 |
routingFailoverA routing failover event occurred on a collector. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.48 |
routingFailoverInterfaceDownAlertOne or more interfaces involved in routing failover for a collector are down. The spRoutingFailoverInterfaces object documents the list of interfaces that are down. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.49 |
routingFailoverInterfaceDownAlertDoneA previously started alert for down routing failover interfaces has finished. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.50 |
trafficAutoMitigationTraffic has been seen by a TMS for a Managed Object which has been configured for traffic-based auto-mitigation. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.51 |
cloudSignalingMitigationRequestA cloud signaling mitigation request has been seen and an alert created. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.52 |
licenseErrorAn SP Deployment License error alert has started. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.53 |
licenseErrorDoneAn SP Deployment License error alert has ended. NOTIFICATION-TYPE .1.3.6.1.4.1.9694.1.4.3.0.54 |