PCE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for PCE-MIB.
4085
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
4085 total| Object Name |
|---|
pce OBJECT IDENTIFIER .1.3.6.1.4.1.866 |
nodeStatusChanged} TRAP-TYPE .1.3.6.1.4.1.866.0.0 |
lineStatusChanged} TRAP-TYPE .1.3.6.1.4.1.866.0.1 |
frxStateChangeA frxStateChange trap signifies that a outstanding
events takes place. This event is not in frxNodeStateChange,
frxLineStateChange, frxLoadAndTrafficEvent,
frxManagementEvent, frxServicesStateChange. TRAP-TYPE .1.3.6.1.4.1.866.0.5 |
frxNodeStateChangeA frxNodeStateChange trap signifies that a state
changing takes place in the equipment or in a
module. TRAP-TYPE .1.3.6.1.4.1.866.0.6 |
frxLineStateChangeA frxLineStateChange trap signifies that a state
changing takes place over a SLL (Switched
Logical Link), over the level 2 or 3 protocol
of the line. It can indicate a charge overflow
of the line. TRAP-TYPE .1.3.6.1.4.1.866.0.7 |
frxLoadAndTrafficEventA frxLoadAndTrafficEvent trap signifies that the
maximum threshold, like the number of virtual circuits,
the data frame rejection threshold ..., is reached. TRAP-TYPE .1.3.6.1.4.1.866.0.8 |
frxManagementEventA frxManagementEvent trap signifies that a
configuration changing takes place or someone
behaves on the system. TRAP-TYPE .1.3.6.1.4.1.866.0.9 |
frxServicesStateChangeA frxServicesStateChange trap signifies that something
about additional services (securized virtual circuit,
compression, regrouping frames) takes place. TRAP-TYPE .1.3.6.1.4.1.866.0.10 |
cpcClearVirtualCircuitEventA cpcClearVirtualCircuitEvent trap signifies
a X25 failed connection between proxy agent
and remote equipment. TRAP-TYPE .1.3.6.1.4.1.866.0.100 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.866.1 |
compacV9toV11 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.1 |
transProduct OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.10 |
netAccessProduct OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20 |
adaptis OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.10 |
vpx10 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.20 |
vpx20 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.21 |
mcx103 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.30 |
mcx104 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.31 |
atLan OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.40 |
mcx300 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.50 |
frx300 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.60 |
vcx100 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.90 |
avb1002-EM OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.200 |
avb1002-FXS-FXO OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.201 |
sc103-3W OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.210 |
sc103-6W OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.211 |
sc103-6W-M OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.212 |
sc104 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.220 |
sc106 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.225 |
sc112 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.226 |
sc300-1W-1E OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.230 |
sc300-3W-1E OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.231 |
sc300-4W OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.232 |
sc310-8W OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.240 |
sc310-12W OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.241 |
sc320-4W-1TR OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.250 |
sc320-8W-1TR OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.251 |
sc330 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.254 |
sc1200 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.20.255 |
netConcentratorProduct OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30 |
mcx09 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.20 |
mcx109 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.21 |
mcx106 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.30 |
mcx112 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.35 |
mcx212 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.40 |
mcx212Y OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.41 |
mcx512 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.45 |
mcx512Y OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.46 |
lmx506 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.50 |
frx800 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.60 |
sc512 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.210 |
sc512Y OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.211 |
hpb1025-8W OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.220 |
hpb1025-12W OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.221 |
spb1033 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.250 |
dvb1008 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.30.270 |
netBackboneProduct OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.40 |
npx09 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.40.20 |
npx90 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.40.21 |
frx1000 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.40.60 |
frx2000 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.40.65 |
frx2000Y OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.40.70 |
mmx5000 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.40.100 |
mmx10000 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.40.105 |
sc5000 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.40.200 |
netCentralSiteProduct OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.50 |
fpb2025 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.50.200 |
rpb2025 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.50.201 |
spb2033 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.50.250 |
dvb2030 OBJECT IDENTIFIER .1.3.6.1.4.1.866.1.50.270 |
manager OBJECT IDENTIFIER .1.3.6.1.4.1.866.2 |
nodeNameThis describes the name of the node whose status
has changed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.866.2.1 |
nodeStatusThis describes the status of the node.ro Enumeration .1.3.6.1.4.1.866.2.2 |
portLabelThis describes the label of the port whose status
has changed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.866.2.3 |
portNumberThis describes the number of the port whose
status has changed.ro INTEGER .1.3.6.1.4.1.866.2.4 |
portStatusThis describes the status of the port.ro Enumeration .1.3.6.1.4.1.866.2.5 |
changeDescriptionDescription of the status report.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.866.2.6 |
systemDescription OBJECT IDENTIFIER .1.3.6.1.4.1.866.3 |
projects OBJECT IDENTIFIER .1.3.6.1.4.1.866.4 |
frxSoftware OBJECT IDENTIFIER .1.3.6.1.4.1.866.20 |
frxConfig OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1 |
fcControl OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.1 |
fcCtlConfigurationStateThe value of this object indicates the current
state of the configuration (see
fcCtlConfigurationCommand to manage this
configuration) :
noChange : not any objects has been modified
since the last 'load' command or the last
boot,
notReady : this configuration can not be saved
because it has not been checked or it has
been checked but it contains some errors,
limitedReset : this configuration may be saved
and it may be taken into account by a
'hotReset' command,
reboot : this configuration may be saved and it
will be taken into account by the next
'reboot' command (the 'hotReset' command
is not enough complete),
savingInProgress : this configuration is beeing
saved, do not modify any parameter while
this saving is being processed,
loadingInProgress : a new configuration is
beeing loaded, do not modify any parameter
while this loading is being processed.ro Enumeration .1.3.6.1.4.1.866.20.1.1.1 |
fcCtlStateCheckingResultsThe value of this object indicates the results of
the checking controls of the configuration. This
message is also recorded in fcCtlErrorTable.ro DisplayString .1.3.6.1.4.1.866.20.1.1.2 |
fcCtlConfigurationCommandThe value of this object is the command used to
manage the current configuration :
ready : this value is always returned by the
equipment in response to a GET request,
check : a SET to this value starts the global
checking of the current configuration (the
possible errors are described in
fcCtlStateCheckingResults), determines
which ports are concerned by the
modifications (see fcCtlAlteredLpTable and
fcCtlAlteredIfTable for the list of these
ports) and sets fcCtlConfigurationState to
'notReady', 'limitedReset' or 'reboot',
load : a SET to this value starts the loading
of the configuration from
fcCtlStorageDevice, this configuration
replaces the current one (do not modify
any parameter while this loading is being
processed),
save : a SET to this value starts the saving of
the current configuration to
fcCtlStorageDevice (do not modify any
parameter while this saving is being
processed). This saving procedure must
follow a checking command with correct
results.
erase : not available,
hotReset : a SET to this value resets (i.e.,
disconnects and connects) the ports, the
parameters of which have been changed (see
fcCtlAlteredLpTable and
fcCtlAlteredIfTable for the list of these
ports), this is possible only if
fcCtlConfigurationState is equal to
'limitedReset',
reboot : a SET to this value reboots the
equipment, the configuration taken into
account is specified by fcCtlBootDevice.
When the current configuration is going to be
modified, it is advisable to save a valid one on
the backupNvram to avoid the loss of accessibility
to the equipment.
The default value is 'ready'.rw Enumeration .1.3.6.1.4.1.866.20.1.1.10 |
fcCtlBootDeviceThe value of this object is the device containing
the configuration which will be used by the
equipment at next boot time. When the equipment
fails to boot because of an inconsistent
configuration, it will retry to boot with another
one as following :
normalNvram : normal non volatile random access
memory (i.e., first part of the EEPROM),
when it boots the equipment tries to use
the configuration from :
1st time : normalNvram,
2nd time normalNvram,
3rd time backupNvram,
4th time flashMemory.
backupNvram : backup non volatile random access
memory (i.e., second part of the EEPROM),
when it boots the equipment tries to use
the configuration from :
1st time backupNvram,
2nd time backupNvram,
3rd time flashMemory.
startCard : start card, when it boots the
equipment tries to use the configuration
from :
1st time startCard,
2nd time startCard,
3rd time backupNvram,
4th time flashMemory.
The default value is 'normalNvram'.rw Enumeration .1.3.6.1.4.1.866.20.1.1.20 |
fcCtlStorageDeviceThe value of this object is the device where the
next load or save command will operate :
normalNvram : normal non volatile random access
memory (i.e., first part of the EEPROM),
backupNvram : backup non volatile random access
memory (i.e., second part of the EEPROM),
startCard : start card,
flashMemory : flash memory, this device is not
available for the save command (this
configuration is a minimum one).
The default value is 'normalNvram'.rw Enumeration .1.3.6.1.4.1.866.20.1.1.21 |
fcCtlAlteredLpTableThis table contains the logical ports that will be
reinitialized by the next hotReset command. SEQUENCE OF FcCtlAlteredLpEntry .1.3.6.1.4.1.866.20.1.1.30 |
fcCtlAlteredLpEntryAn entry of fcCtlAlteredLpTable. FcCtlAlteredLpEntry .1.3.6.1.4.1.866.20.1.1.30.1 |
fcCtlAlteredLpIdThe value of this object identifies one and only
one logical port which will be reinitialized by
the next hotReset command (see
fcCtlConfigurationCommand).ro INTEGER .1.3.6.1.4.1.866.20.1.1.30.1.1 |
fcCtlAlteredDlciTable SEQUENCE OF FcCtlAlteredDlciEntry .1.3.6.1.4.1.866.20.1.1.31 |
fcCtlAlteredDlciEntryAn entry of fcCtlAlteredDlciTable. FcCtlAlteredDlciEntry .1.3.6.1.4.1.866.20.1.1.31.1 |
fcCtlAlteredDlciPpIdPP idro INTEGER .1.3.6.1.4.1.866.20.1.1.31.1.1 |
fcCtlAlteredDlciNumDLCIro INTEGER .1.3.6.1.4.1.866.20.1.1.31.1.2 |
fcCtlAlteredDlciStateEtatrw Enumeration .1.3.6.1.4.1.866.20.1.1.31.1.3 |
fcCtlAlteredIfTableThis table contains the interfaces that will be
reinitialized by the next hotReset command. SEQUENCE OF FcCtlAlteredIfEntry .1.3.6.1.4.1.866.20.1.1.32 |
fcCtlAlteredIfEntryAn entry of fcCtlAlteredIfTable. FcCtlAlteredIfEntry .1.3.6.1.4.1.866.20.1.1.32.1 |
fcCtlAlteredIfIdThe value of this object identifies one and only
one interface which will be reinitialized by the
next hotReset command (see
fcCtlConfigurationCommand).ro INTEGER .1.3.6.1.4.1.866.20.1.1.32.1.1 |
fcCtlErrorTableThis table contains the last 8 configuration
messages. The last message is the first one in the
table (fcCtlErrorIndex = 1), the oldest is the
last one (fcCtlErrorIndex = 8). SEQUENCE OF FcCtlErrorEntry .1.3.6.1.4.1.866.20.1.1.40 |
fcCtlErrorEntryAn entry of fcCtlErrorTable. FcCtlErrorEntry .1.3.6.1.4.1.866.20.1.1.40.1 |
fcCtlErrorIndexThe value of this object identifies one and only
one message. '1' identifies the last message and
'8' the oldest one.ro INTEGER .1.3.6.1.4.1.866.20.1.1.40.1.1 |
fcCtlErrorCodeThe value of this object is the error code for
this error. '0' means that this message does not
contain an error but some useful informations.ro INTEGER .1.3.6.1.4.1.866.20.1.1.40.1.2 |
fcCtlErrorMessageThe value of this object is the textual
description of this message.ro DisplayString .1.3.6.1.4.1.866.20.1.1.40.1.3 |
fcCtlErrorTimeThe value of this object is the value of sysUpTime
when this message was recorded.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.20.1.1.40.1.4 |
fcCtlHRCheckMessagesTableThis table contains . SEQUENCE OF FcCtlHRCheckMessagesEntry .1.3.6.1.4.1.866.20.1.1.50 |
fcCtlHRCheckMessagesEntryAn entry of fcCtlHRCheckMessagesTable. FcCtlHRCheckMessagesEntry .1.3.6.1.4.1.866.20.1.1.50.1 |
fcCtlHRCheckMsgIndexThe value of this object identifies one and only
one message.ro INTEGER .1.3.6.1.4.1.866.20.1.1.50.1.1 |
fcCtlHRCheckMsgCodeThe value of this object is .ro OCTET STRING .1.3.6.1.4.1.866.20.1.1.50.1.2 |
fcCtlHRCheckMessageThe value of this object is .ro DisplayString .1.3.6.1.4.1.866.20.1.1.50.1.3 |
fcSystem OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.2 |
fcsConfigDescription OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.2.1 |
fcsConfigDescNameThe value of this object is a textual comment. It
can be used to store a little description of the
configuration or of the equipment.
This is a 0 to 8 ASCII characters string.
The default value is 'Default'.rw DisplayString .1.3.6.1.4.1.866.20.1.2.1.1 |
fcsConfigDescAuthorThe value of this object is a textual comment. It
can be used to store the name of the person who
creates the configuration.
This is a 0 to 8 ASCII characters string.
The default value is 'PCE'.rw DisplayString .1.3.6.1.4.1.866.20.1.2.1.2 |
fcsConfigDescDateThe value of this object is an octet string
comment. It can be used to store the date when the
configuration is created.
This is a three-bytes octet string with digits in
the range 0 to 9.
The default value is '01 01 96'.rw OCTET STRING .1.3.6.1.4.1.866.20.1.2.1.3 |
fcsConfigDescVersionThe value of this object can be used to store the
version of the configuration.
This is a decimal integer in the range 1 to 254.
The default value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.2.1.4 |
fcsHardwareDescription OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.2.2 |
fcsHardDescReplicatedModeThe value of this object indicates whether the
replicated mode is enabled (on two or three
modules) or not. The replicated mode permits,
inside a unit with two or three modules, to backup
all the lines of a breakdown module on the
remaining ones. This feature can be enabled only
on a particular hardware.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.2.2.1 |
fcsModuleTableThis table defines for each module of the
subscriber number of the bridge and routers
entities, and which of these entities must be
initialized (i.e., must reserve resources).
It is not possible to add or delete an entry of
this table. SEQUENCE OF FcsModuleEntry .1.3.6.1.4.1.866.20.1.2.5 |
fcsModuleEntryAn entry of fcsModuleTable. FcsModuleEntry .1.3.6.1.4.1.866.20.1.2.5.1 |
fcsModuleIdThe value of this object identifies one and only
one module.ro INTEGER .1.3.6.1.4.1.866.20.1.2.5.1.1 |
fcsModuleSubscriberNumberThe value of this object is the subscriber number
added to the DNICZO of the equipment to make the
calling address in a call sent from the bridge or
routers entities of this module.
This is a one-byte octet string with 2 digits in
the range 0 to 9.
The default values are '93' for the module 0, '94'
for the module 1, '95' for the module 2.rw OCTET STRING .1.3.6.1.4.1.866.20.1.2.5.1.2 |
fcsModuleBridgeInitThe value of this object indicates whether the
bridge entity is initialized on this module or
not. When not initialized this entity does not
reserve resources that thus are available for
other entities.
The default value is 'off' for each of the three
modules.rw Enumeration .1.3.6.1.4.1.866.20.1.2.5.1.5 |
fcsModuleIpxRouterInitThe value of this object indicates whether the IPX
router entity is initialized on this module or
not. When not initialized this entity does not
reserve resources that thus are available for
other entities.
The default value is 'off' for each of the three
modules.rw Enumeration .1.3.6.1.4.1.866.20.1.2.5.1.6 |
fcsModuleClnpRouterInitThe value of this object indicates whether the
CLNP router entity is initialized on this module
or not. When not initialized this entity does not
reserve resources that thus are available for
other entities.
The default value is 'off' for each of the three
modules.rw Enumeration .1.3.6.1.4.1.866.20.1.2.5.1.7 |
fcManagement OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.3 |
fcmManagementFunctions OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.3.1 |
fcmMgtFctActivationTableThis table indicates the activation of each
management function.
It is not possible to add or delete an entry of
this table. SEQUENCE OF FcmMgtFctActivationEntry .1.3.6.1.4.1.866.20.1.3.1.1 |
fcmMgtFctActivationEntryAn entry of fcmMgtFctActivationTable. FcmMgtFctActivationEntry .1.3.6.1.4.1.866.20.1.3.1.1.1 |
fcmMgfActNameThe value of this object identifies oneand only
one management function.ro Enumeration .1.3.6.1.4.1.866.20.1.3.1.1.1.1 |
fcmMgfActAdminStatusThe value of this object indicates whether this
management function is initialized or not. When
not initialized this management function does not
reserve resources that thus are available for
other entities.
The default values are :
trafficGeneration : on,
observation : on,
statistics : on,
outstandingEvents : on,
fileTransfer : on,
telemaintenance : on,
alarm : off,
userInterface : on,
billing : on,
extendedStatistics : off,
exploitationAccess : on.rw Enumeration .1.3.6.1.4.1.866.20.1.3.1.1.1.2 |
fcmMgfActPasswordThe value of this object is the password needed to
enable this management function. This password
takes place in the call user data of a call to
this management function. It must contains 1 to 6
alphanumeric characters (except for 'alarm' which
can not be called and then does not use a
password).
The default values are :
trafficGeneration : GG,
observation : OO,
statistics : SS,
outstandingEvents : EE,
fileTransfer : TT,
telemaintenance : MM,
alarm : (empty),
userInterface : RR,
billing : TX,
extendedStatistics : SC,
exploitationAccess : PP.rw DisplayString .1.3.6.1.4.1.866.20.1.3.1.1.1.3 |
fcmMgtFctParameters OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.3.1.2 |
fcmMgfGeneratorCountThe value of this object is the maximum number of
traffic generators that may be enabled.
This is a decimal integer in the range 1 to 15.
The default value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.3.1.2.1 |
fcmMgfGeneratorsActionThe value of this object indicates whether the
generators send traffic ('output') or receive
traffic ('input').
The default value is 'output'.rw Enumeration .1.3.6.1.4.1.866.20.1.3.1.2.2 |
fcmMgfGeneratorsDelayThe value of this object indicates, when the
generators send traffic, the delay in seconds
between two successive sent packets.
This is a decimal integer in the range 0 to 98.
The default value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.3.1.2.3 |
fcmMgfAlarmsSubscriber1The value of this object indicates the X121
address of the main manager to which the alarms
will be sent.
This is a eight-bytes octet string with up to 15
digits in the range 0 to 9. It must be padded with
'F' digits for a total of 16 digits. The equipment
configurator does not need this final padding.
The default value is 'FF FF FF FF FF FF FF FF'
meaning 'empty value' (blank value on the
equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.3.1.2.10 |
fcmMgfAlarmsSubscriber2The value of this object indicates the X121
address of the backup manager to which the alarms
will be sent.
This is a eight-bytes octet string with up to 15
digits in the range 0 to 9. It must be padded with
'F' digits for a total of 16 digits. The equipment
configurator does not need this final padding.
The default value is 'FF FF FF FF FF FF FF FF'
meaning 'empty value' (blank value on the
equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.3.1.2.11 |
fcmMgfStatSummingPeriodThe value of this object indicates the period, in
seconds, during which the statistics are
calculated in the 'notInfinite' summing mode (see
fmsCtrlSumming).
This is a decimal integer in the range 10 to 990
by step of 10.
The default value is '10'.rw INTEGER .1.3.6.1.4.1.866.20.1.3.1.2.20 |
fcmMgfStatBufferThresholdThe value of this object indicates a threshold in
percents used by the statistics management
function. The statistics management function
calculates how long more than
fcmMgfStatBufferThreshold percents of buffers are
used and how long more than
fcmMgfStatBufferThreshold percents of CPU is busy.
This is a decimal integer in the range 0 to 100.
The default value is '75'.rw INTEGER .1.3.6.1.4.1.866.20.1.3.1.2.21 |
fcmMgfStatThroughputSamplingPeriodThe value of this object indicates a sampling
period in seconds used by the statistics
management function. The statistics management
function determines the observed throughput by
counting the octets sent or received on a line
during this sampling period. More this sampling
period is small, more precise is the evaluated
throughput.
This is a decimal integer in the range 10 to 1800
by step of 10.
The default value is '60'.rw INTEGER .1.3.6.1.4.1.866.20.1.3.1.2.25 |
fcmMgfStatOutputThresholdThe value of this object indicates a threshold in
percents used by the statistics management
function. The statistics management function
calculates how long the observed outgoing
throughput is superior to fcmMgfStatOuputThreshold
percents of the maximum throughput of the line.
This is a decimal integer in the range 0 to 100.
The default value is '75'.rw INTEGER .1.3.6.1.4.1.866.20.1.3.1.2.26 |
fcmMgfStatInputThresholdThe value of this object indicates a threshold in
percents used by the statistics management
function. The statistics management function
calculates how long the observed incoming
throughput is superior to fcmMgfStatOuputThreshold
percents of the maximum throughput of the line.
This is a decimal integer in the range 0 to 100.
The default value is '75'.rw INTEGER .1.3.6.1.4.1.866.20.1.3.1.2.27 |
fcmMgfStatLogChannelSamplingPeriodThe value of this object indicates a period in
seconds used by the statistics management
function. The statistics management function
periodically counts the busy logical channels on a
line every fcmMgfStatLogChannelSamplingPeriod
seconds.
This is a decimal integer in the range 10 to 1800
by step of 10.
The default value is '60'.rw INTEGER .1.3.6.1.4.1.866.20.1.3.1.2.30 |
fcmMgfStatLogChannelThresholdThe value of this object indicates a threshold in
percents used by the statistics management
function. The statistics management function
calculates how long the observed number of the
busy logical channels is superior to
fcmMgfStatLogChannelThreshold percents of the
maximum number of logical channels for a line.
This is a decimal integer in the range 0 to 100.
The default value is '75'.rw INTEGER .1.3.6.1.4.1.866.20.1.3.1.2.31 |
fcmMgfConversionAimedPointConversion adresse : point viserw Enumeration .1.3.6.1.4.1.866.20.1.3.1.2.32 |
fcmMgfConversionIncomingCallConversion d'adresse sur appel entrantrw Enumeration .1.3.6.1.4.1.866.20.1.3.1.2.33 |
fcmMgfConversionOutgoingCallConversion adresse sur appel sortantrw Enumeration .1.3.6.1.4.1.866.20.1.3.1.2.34 |
fcmMgfConversionAddressCheckConversion adresse : controle de la presence dans
les tables de conversionrw Enumeration .1.3.6.1.4.1.866.20.1.3.1.2.35 |
fcmMgfConvMultiCalledAddrInCallNumero d'identification pour conversion d'adresse
d'appele multi-criteres en entreerw INTEGER .1.3.6.1.4.1.866.20.1.3.1.2.36 |
fcmMgfConvMultiCallingAddrInCallNumero d'identification pour conversion d'adresse
d'appelant multi-criteres en entreerw INTEGER .1.3.6.1.4.1.866.20.1.3.1.2.37 |
fcmMgfConvMultiCalledAddrOutCallNumero d'identification pour conversion d'adresse
d'appele multi-criteres en sortierw INTEGER .1.3.6.1.4.1.866.20.1.3.1.2.38 |
fcmMgfConvMultiCallingAddrOutCallNumero d'identification pour conversion d'adresse
d'appelant multi-criteres en sortierw INTEGER .1.3.6.1.4.1.866.20.1.3.1.2.39 |
fcmMgfBISDNChannelOpeningThe value of this object describes the way ISDN
backup will operate :
off: B ISDN channel opening is automatic
on: B ISDN channel opening is under management
center control. A comparison is done
between the calling address and the
Manager and backup addresses defined in
the management functions. If one of these
addresses matches, the B ISDN channel is
opened, otherwise the restart works only
if the B channel is already open.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.3.1.2.40 |
fcmMgfCallAcceptwithReverseChargingAcceptation appel avec TADrw Enumeration .1.3.6.1.4.1.866.20.1.3.1.2.41 |
fcmMgfClosedUserGroupGFArw Enumeration .1.3.6.1.4.1.866.20.1.3.1.2.42 |
fcmMgtFctCugTableThis table defines the configuration of four
couples internal GFU / external GFU for each
operating function. SEQUENCE OF FcmMgtFctCugEntry .1.3.6.1.4.1.866.20.1.3.1.3 |
fcmMgtFctCugEntryAn entry of fcmMgtFctCugTable. FcmMgtFctCugEntry .1.3.6.1.4.1.866.20.1.3.1.3.1 |
fcmMgtFctCugFunctionIdThe value of this object defines the operating
functionro Enumeration .1.3.6.1.4.1.866.20.1.3.1.3.1.1 |
fcmMgtFctCugGroupIdThe value of this object defines the number of the
group for each couple internal GFU / external GFU
This is a decimal integer in the range 0 to 3.
The default value is '0'.ro INTEGER .1.3.6.1.4.1.866.20.1.3.1.3.1.2 |
fcmMgtFctCugClosedUserGroupExtGFU externe
This is a decimal integer in the range 0 to 99.
The default value is ' '.rw INTEGER .1.3.6.1.4.1.866.20.1.3.1.3.1.3 |
fcmMgtFctCugClosedUserGroupIntGFU interne
The value of this object indicates a
This is a decimal integer in the range 0 to 99.
The default value is ' '.rw INTEGER .1.3.6.1.4.1.866.20.1.3.1.3.1.4 |
fcmMgtFctCugCheckingThe value of this object defines on which call the
equipment checks this CUG. The default values is
'onIncomingCallAndOutgoingCall'.rw Enumeration .1.3.6.1.4.1.866.20.1.3.1.3.1.5 |
fcmAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.3.2 |
fcmAlrmEventTableThis table defines, for each family, the selection
of events which may be sent as alarms on the one
hand, and as SNMP traps on the other hand. For
most of these families, their events are sent for
the physical ports selected in
fcmAlrmPhysPortTable.
It is not possible to add or delete an entry of
this table. SEQUENCE OF FcmAlrmEventEntry .1.3.6.1.4.1.866.20.1.3.2.1 |
fcmAlrmEventEntryAn entry of fcmAlrmEventTable. FcmAlrmEventEntry .1.3.6.1.4.1.866.20.1.3.2.1.1 |
fcmAlrmEvtFamilyIdThe value of this object identifies one and only
one events family (the hexadecimal code of this
family is the last part of the value-name). This
entry selects events of this family which may be
sent as alarms on the one hand, and as SNMP traps
on the other hand.ro Enumeration .1.3.6.1.4.1.866.20.1.3.2.1.1.1 |
fcmAlrmEvtEventSelectionThe value of this object indicates whether all the
events of this family are selected or only those
mentioned for this family (in this case one to
seven events may be selected).
The default value is 'mentioned'.rw Enumeration .1.3.6.1.4.1.866.20.1.3.2.1.1.2 |
fcmAlrmEvtEvent1The value of this object is an event of this
family which is selected when
fcmAlrmEvtEventSelection is set to 'mentioned'.
This is a one-byte octet string with 2 digits in
the range 0 to F.
The default value is 'FF' meaning 'empty value'
(blank value on the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.3.2.1.1.3 |
fcmAlrmEvtEvent2The value of this object is an event of this
family which is selected when
fcmAlrmEvtEventSelection is set to 'mentioned'.
This is a one-byte octet string with 2 digits in
the range 0 to F.
The default value is 'FF' meaning 'empty value'
(blank value on the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.3.2.1.1.4 |
fcmAlrmEvtEvent3The value of this object is an event of this
family which is selected when
fcmAlrmEvtEventSelection is set to 'mentioned'.
This is a one-byte octet string with 2 digits in
the range 0 to F.
The default value is 'FF' meaning 'empty value'
(blank value on the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.3.2.1.1.5 |
fcmAlrmEvtEvent4The value of this object is an event of this
family which is selected when
fcmAlrmEvtEventSelection is set to 'mentioned'.
This is a one-byte octet string with 2 digits in
the range 0 to F.
The default value is 'FF' meaning 'empty value'
(blank value on the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.3.2.1.1.6 |
fcmAlrmEvtEvent5The value of this object is an event of this
family which is selected when
fcmAlrmEvtEventSelection is set to 'mentioned'.
This is a one-byte octet string with 2 digits in
the range 0 to F.
The default value is 'FF' meaning 'empty value'
(blank value on the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.3.2.1.1.7 |
fcmAlrmEvtEvent6The value of this object is an event of this
family which is selected when
fcmAlrmEvtEventSelection is set to 'mentioned'.
This is a one-byte octet string with 2 digits in
the range 0 to F.
The default value is 'FF' meaning 'empty value'
(blank value on the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.3.2.1.1.8 |
fcmAlrmEvtEvent7The value of this object is an event of this
family which is selected when
fcmAlrmEvtEventSelection is set to 'mentioned'.
This is a one-byte octet string with 2 digits in
the range 0 to F.
The default value is 'FF' meaning 'empty value'
(blank value on the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.3.2.1.1.9 |
fcmAlrmPhysPortTableThis table defines, for each family, the selection
of lines from which the events selected in
fcmAlrmEventTable will be sent as alarms on the
one hand, and as SNMP traps on the other hand.
It is not possible to add or delete an entry of
this table. SEQUENCE OF FcmAlrmPhysPortEntry .1.3.6.1.4.1.866.20.1.3.2.2 |
fcmAlrmPhysPortEntryAn entry of fcmAlrmPhysPortTable. FcmAlrmPhysPortEntry .1.3.6.1.4.1.866.20.1.3.2.2.1 |
fcmAlrmPpFamilyIdThe value of this object identifies one and only
one events family (the hexadecimal code of this
family is the last part of the value-name). This
entry selects lines from which the events selected
in fcmAlrmEventTable will be sent as alarms on the
one hand, and as SNMP traps on the other hand.ro Enumeration .1.3.6.1.4.1.866.20.1.3.2.2.1.1 |
fcmAlrmPpPhysPortSelectionThe value of this object indicates whether the
selected events of this family are sent only for
the physical ports mentioned for this family or
for all the physical ports except those mentioned
(note in this second case that all the physical
ports are selected when none is specified).
The default value is 'mentioned'.rw Enumeration .1.3.6.1.4.1.866.20.1.3.2.2.1.2 |
fcmAlrmPpPhysPort1The value of this object is a physical port for
which the selected events of this family will be
or will not be sent according to
fcmAlrmPpPhysPortSelection.
This is a decimal integer in the range 0 to 35.
The default value is '255' meaning 'empty value'
(blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.3.2.2.1.3 |
fcmAlrmPpPhysPort2The value of this object is a physical port for
which the selected events of this family will be
or will not be sent according to
fcmAlrmPpPhysPortSelection.
This is a decimal integer in the range 0 to 35.
The default value is '255' meaning 'empty value'
(blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.3.2.2.1.4 |
fcmAlrmPpPhysPort3The value of this object is a physical port for
which the selected events of this family will be
or will not be sent according to
fcmAlrmPpPhysPortSelection.
This is a decimal integer in the range 0 to 35.
The default value is '255' meaning 'empty value'
(blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.3.2.2.1.5 |
fcmAlrmPpPhysPort4The value of this object is a physical port for
which the selected events of this family will be
or will not be sent according to
fcmAlrmPpPhysPortSelection.
This is a decimal integer in the range 0 to 35.
The default value is '255' meaning 'empty value'
(blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.3.2.2.1.6 |
fcmAlrmPpPhysPort5The value of this object is a physical port for
which the selected events of this family will be
or will not be sent according to
fcmAlrmPpPhysPortSelection.
This is a decimal integer in the range 0 to 35.
The default value is '255' meaning 'empty value'
(blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.3.2.2.1.7 |
fcmAlrmPpPhysPort6The value of this object is a physical port for
which the selected events of this family will be
or will not be sent according to
fcmAlrmPpPhysPortSelection.
This is a decimal integer in the range 0 to 35.
The default value is '255' meaning 'empty value'
(blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.3.2.2.1.8 |
fcmAlrmPpPhysPort7The value of this object is a physical port for
which the selected events of this family will be
or will not be sent according to
fcmAlrmPpPhysPortSelection.
This is a decimal integer in the range 0 to 35.
The default value is '255' meaning 'empty value'
(blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.3.2.2.1.9 |
fcInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.10 |
fcfPhysicalPortTableThis table defines how the physical ports of the
equipment are used to build the interfaces.
It is not possible to add or delete an entry of
this table. SEQUENCE OF FcfPhysicalPortEntry .1.3.6.1.4.1.866.20.1.10.1 |
fcfPhysicalPortEntryAn entry of fcfPhysicalPortTable. FcfPhysicalPortEntry .1.3.6.1.4.1.866.20.1.10.1.1 |
fcfPhysPortIdThe value of this object identifies one and only
one physical port. A physical port has the same
number than the physical connector which it goes
with (this number is indicated on the equipment).
This is a decimal integer in the range 0 to the
number of the physical ports minus 1 (36 at the
most).ro INTEGER .1.3.6.1.4.1.866.20.1.10.1.1.1 |
fcfPhysPortConnectorThe value of this object indicates whether the
connector type is Ethernet or DB25 or RJ45.ro Enumeration .1.3.6.1.4.1.866.20.1.10.1.1.2 |
fcfInterfaceTypeThe value of this object indicates how this
physical port is used to build an interface (the
interface identifiers are set by the equipment) :
unUsed : this physical port is not used,
ethernetAui : this physical port will support
an ethernet interface with the same
identifier (AUI connector for 10 base 5
ethernet),
ethernet10baseT : this physical port will
support an ethernet interface with the
same identifier (RJ 45 connector for 10
base T ethernet),
ethernetAuto : this physical port will support
an ethernet interface with the same
identifier (automatic detection between 10
base 5 and 10 base T),
line : this physical port will support a serial
line interface with the same identifier
(the characteristics of this serial line
interface are described in fcfLineTable),
isdnBChannel : this physical port will support
a B-channel of an ISDN Basic Rate
Interface,
isdnDChannel : this physical port will support
a D-channel of an ISDN Basic Rate
Interface with the same identifier (the
characteristics of this ISDN BRI are
described in
fcfIsdnBasicRateInterfaceTable).
interUnitLinks : this physical port will
support a UnitLinks Interface,
e1 : this physical port will support a E1
Interface,
ds1 : this physical port will support a DS1
Interface,
isdnPri : this physical port will support a
Primary Rate Interface,
tokenRing : this physical port will support a
token ring Interface,
analogVoiceEM : this physical port will support
a EM analog voice Interface,
analogVoiceFxs : this physical port will
support a Fxs analog voice Interface,
analogVoiceFxo : this physical port will
support a Fxo analog voice Interface,
isdnBri : this physical port will support a
Basic Rate Interface,
Each equipment has its own characteristics and the
building of the interfaces must be done according
to its hardware limitations.
The default value is 'unUsed'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.1.1.3 |
fcfLines OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.10.2 |
fcfLineTableThis table defines the characteristics of the
serial line interfaces.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfPhysicalPortTable, to one instance of
fcfInterfaceType equal to 'line'). SEQUENCE OF FcfLineEntry .1.3.6.1.4.1.866.20.1.10.2.1 |
fcfLineEntryAn entry of fcfLineTable. FcfLineEntry .1.3.6.1.4.1.866.20.1.10.2.1.1 |
fcfLineInterfaceIdThe value of this object identifies one and only
one serial line interface. Each serial line
interface corresponds, in fcfPhysicalPortTable, to
one instance of fcfInterfaceType equal to 'line'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.1.1.1 |
fcfLineTypeThe value of this object indicates which DTE/DCE
interface characteristics (physical layer) are
used on this serial line interface :
synchronousV28Dte : Synchronous, V28, the
equipment is a DTE,
synchronousV28Dce : Synchronous, V28, the
equipment is a DCE,
asynchronousV28Dte : Asynchronous, V28, the
equipment is a DTE,
asynchronousV28Dce : Asynchronous, V28, the
equipment is a DCE,
v11Dte : Synchronous, V11, the equipment is a
DTE,
v11Dce : Synchronous, V11, the equipment is a
DCE,
v35Dte : Synchronous, V35, the equipment is a
DTE,
v35Dce : Synchronous, V35, the equipment is a
DCE,
g703 : G703.
The selection of this type must be done according
to the hardware characteristics of this serial
line interface.
The default value is 'synchronousV28Dte'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.1.1.2 |
fcfLineModemManagementThe value of this object indicates whether a modem
is drived by the equipment or not. The
characteristics of the modem are described in
fcfLineModemTable.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.1.1.3 |
fcfLineSpeedThe value of this object indicates the speed in
bits per second used on this serial line
interface. The values s300, s57600 and s115200 can
not be used on synchronous serial line interfaces.
The default value is 's19200'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.1.1.4 |
fcfLineLinkCheckPeriodThe value of this object indicates a period in
milliseconds used to look after the circuits of
this serial line interface. Each circuit state is
checked every fcfLineLinkCheckPeriod milliseconds
and when it changes and remains changed after
fcfLineCheckPeriodCount checkings, this new state
is delivered to the upper level.
This is a decimal integer in the range 200 to
50800 by step of 200.
The default value is '2000'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.2.1.1.5 |
fcfLineCheckPeriodCountThe value of this object indicates the number of
checkings of the circuits of this serial line
interface. Each circuit state is checked every
fcfLineLinkCheckPeriod milliseconds and when it
changes and remains changed after
fcfLineCheckPeriodCount checkings, this new state
is delivered to the upper level.
This is a decimal integer in the range 1 to 250.
The default value is '3'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.2.1.1.6 |
fcfLineV28AsynOutDteSignalTableThis table defines how the outgoing circuits are
used on asynchronous V28 serial line interfaces
when the equipment is a DTE.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfLineTable, to one instance of fcfLineType equal
to 'asynchronousV28Dte'). SEQUENCE OF FcfLineV28AsynOutDteSignalEntry .1.3.6.1.4.1.866.20.1.10.2.5 |
fcfLineV28AsynOutDteSignalEntryAn entry of fcfLineV28AsynOutDteSignalTable. FcfLineV28AsynOutDteSignalEntry .1.3.6.1.4.1.866.20.1.10.2.5.1 |
fcfLineV28AsynOutDteInterfaceIdThe value of this object identifies one and only
one asynchronous V28 DTE serial line interface.
Each asynchronous V28 DTE serial line interface
corresponds, in fcfLineTable, to one instance of
fcfLineType equal to 'asynchronousV28Dte'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.5.1.1 |
fcfLineV28AsynOutDteRts105The value of this object defines whether the
circuit 105 (request to send) is set, in any case,
to 'on' or to 'off'.
The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.5.1.2 |
fcfLineV28AsynOutDteDtr108The value of this object defines whether the
circuit 108 (108/1 : connect data set to line or
108/2 : data terminal ready) is set, in any case,
to 'on' or to 'off'.
The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.5.1.3 |
fcfLineV28AsynOutDteDrs111The value of this object defines whether the
circuit 111 (data signalling rate selector) is
set, in any case, to 'on' or to 'off'.
The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.5.1.4 |
fcfLineV28AsynOutDteRil140The value of this object defines whether the
circuit 140 (loopback / maintance test) is set, in
any case, to 'on' or to 'off'.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.5.1.5 |
fcfLineV28AsynOutDteLl141The value of this object defines whether the
circuit 141 (local loopback) is set, in any case,
to 'on' or to 'off'.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.5.1.6 |
fcfLineV28AsynOutDceSignalTableThis table defines how the outgoing circuits are
used on asynchronous V28 serial line interfaces
when the equipment is a DCE.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfLineTable, to one instance of fcfLineType equal
to 'asynchronousV28Dce'). SEQUENCE OF FcfLineV28AsynOutDceSignalEntry .1.3.6.1.4.1.866.20.1.10.2.6 |
fcfLineV28AsynOutDceSignalEntryAn entry of fcfLineV28AsynOutDceSignalTable. FcfLineV28AsynOutDceSignalEntry .1.3.6.1.4.1.866.20.1.10.2.6.1 |
fcfLineV28AsynOutDceInterfaceIdThe value of this object identifies one and only
one asynchronous V28 DCE serial line interface.
Each asynchronous V28 DCE serial line interface
corresponds, in fcfLineTable, to one instance of
fcfLineType equal to 'asynchronousV28Dce'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.6.1.1 |
fcfLineV28AsynOutDceCts106The value of this object defines whether the
circuit 106 (ready for sending) is set, in any
case, to 'on' or to 'off'.
The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.6.1.2 |
fcfLineV28AsynOutDceDsr107The value of this object defines whether the
circuit 107 (data set ready) is set, in any case,
to 'on' or to 'off'.
The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.6.1.3 |
fcfLineV28AsynOutDceDcd109The value of this object defines whether the
circuit 109 (data channel received line signal
detector) is set, in any case, to 'on' or to
'off'.
The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.6.1.4 |
fcfLineV28AsynOutDceSi117The value of this object defines whether the
circuit 117 (standby indicator) is set, in any
case, to 'on' or to 'off'.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.6.1.5 |
fcfLineV28AsynOutDceTi142The value of this object defines whether the
circuit 142 (test indicator) is set, in any case,
to 'on' or to 'off'.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.6.1.6 |
fcfLineV28AsynInDteSignalTableThis table defines how the incoming circuits are
interpreted on asynchronous V28 serial line
interfaces when the equipment is a DTE.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfLineTable, to one instance of fcfLineType equal
to 'asynchronousV28Dte'). SEQUENCE OF FcfLineV28AsynInDteSignalEntry .1.3.6.1.4.1.866.20.1.10.2.7 |
fcfLineV28AsynInDteSignalEntryAn entry of fcfLineV28AsynInDteSignalTable. FcfLineV28AsynInDteSignalEntry .1.3.6.1.4.1.866.20.1.10.2.7.1 |
fcfLineV28AsynInDteInterfaceIdThe value of this object identifies one and only
one asynchronous V28 DTE serial line interface.
Each asynchronous V28 DTE serial line interface
corresponds, in fcfLineTable, to one instance of
fcfLineType equal to 'asynchronousV28Dte'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.7.1.1 |
fcfLineV28AsynInDteEnablingSig1The value of this object defines which circuits
are scanned to determine whether this serial line
interface is up or down. Secondary circuits may
also be simultaneously scanned (see
fcfLineV28AsynInDteEnablingSig2).
none : the circuits 106, 107, 109 are not used.
If also the circuits 117 and 142 are not
used the state of this interface is
determined by another method,
cts106 : the circuit 106 (ready for sending) is
used,
dsr107 : the circuit 107 (data set ready) is
used,
dcd109 : the circuit 109 (data channel received
line signal detector) is used,
cts106-dsr107 : both circuits 106 and 107 are
used,
cts106-dcd109 : both circuits 106 and 109 are
used,
dsr107-dcd109 : both circuits 107 and 109 are
used,
cts106-dsr107-dcd109 : both circuits 106, 107
and 109 are used.
The default value is 'cts106'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.7.1.2 |
fcfLineV28AsynInDteEnablingSig2The value of this object defines which circuits
are scanned to determine whether this serial line
interface is up or down. Main circuits may also be
simultaneously scanned (see
fcfLineV28AsynInDteEnablingSig1).
none : the circuits 117, 142 are not used. If
also the circuits 106, 107 and 109 are not
used the state of this interface is
determined by another method,
si117 : the circuit 117 (standby indicator) is
used,
ti142 : the circuit 142 (test indicator) is
used.
The default value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.7.1.3 |
fcfLineV28AsynInDteSigMonitored1The value of this object defines which circuits
are monitored to eventually generate the
corresponding event when the state of one of them
changes. Secondary circuits may also be
simultaneously monitored (see
fcfLineV28AsynInDteMonitored2).
none : the circuits 106, 107, 109 are not
monitored,
cts106 : the circuit 106 (ready for sending) is
monitored,
dsr107 : the circuit 107 (data set ready) is
monitored,
dcd109 : the circuit 109 (data channel received
line signal detector) is monitored,
cts106-dsr107 : both circuits 106 and 107 are
monitored,
cts106-dcd109 : both circuits 106 and 109 are
monitored,
dsr107-dcd109 : both circuits 107 and 109 are
monitored,
cts106-dsr107-dcd109 : both circuits 106, 107
and 109 are monitored.
The default value is 'cts106'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.7.1.4 |
fcfLineV28AsynInDteSigMonitored2The value of this object defines which circuits
are monitored to eventually generate the
corresponding event when the state of one of them
changes. Main circuits may also be simultaneously
monitored (see fcfLineV28AsynInDteMonitored1).
none : the circuits 117, 142 are not monitored,
si117 : the circuit 117 (standby indicator) is
monitored,
ti142 : the circuit 142 (test indicator) is
monitored.
The default value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.7.1.5 |
fcfLineV28AsynInDceSignalTableThis table defines how the incoming circuits are
interpreted on asynchronous V28 serial line
interfaces when the equipment is a DCE.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfLineTable, to one instance of fcfLineType equal
to 'asynchronousV28Dce'). SEQUENCE OF FcfLineV28AsynInDceSignalEntry .1.3.6.1.4.1.866.20.1.10.2.8 |
fcfLineV28AsynInDceSignalEntryAn entry of fcfLineV28AsynInDceSignalTable. FcfLineV28AsynInDceSignalEntry .1.3.6.1.4.1.866.20.1.10.2.8.1 |
fcfLineV28AsynInDceInterfaceIdThe value of this object identifies one and only
one asynchronous V28 DCE serial line interface.
Each asynchronous V28 DCE serial line interface
corresponds, in fcfLineTable, to one instance of
fcfLineType equal to 'asynchronousV28Dce'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.8.1.1 |
fcfLineV28AsynInDceEnablingSig1The value of this object defines which circuits
are scanned to determine whether this serial line
interface is up or down. Secondary circuits may
also be simultaneously scanned (see
fcfLineV28AsynInDceEnablingSig2).
none : the circuits 105, 108 are not used. If
also the circuits 111, 140 and 141 are not
used the state of this interface is
determined by another method,
rts105 : the circuit 105 (request to send) is
used,
dtr108 : the circuit 108 (108/1 connect data
set to line, 108/2 data terminal ready) is
used,
rts105-dtr108 : both circuits 105 and 108 are
used.
The default value is 'rts105'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.8.1.2 |
fcfLineV28AsynInDceEnablingSig2The value of this object defines which circuits
are scanned to determine whether this serial line
interface is up or down. Main circuits may also be
simultaneously scanned (see
fcfLineV28AsynInDceEnablingSig1).
none : the circuits 111, 140, 141 are not used.
If also the circuits 105 and 108 are not
used the state of this interface is
determined by another method,
drs111 : the circuit 111 (data signal rate
selector) is used,
ril140 : the circuit 140 (loopback /
maintenance test) is used,
ll141 : the circuit 141 (local loopback) is
used.
The default value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.8.1.3 |
fcfLineV28AsynInDceSigMonitored1The value of this object defines which circuits
are monitored to eventually generate the
corresponding event when the state of one of them
changes. Secondary circuits may also be
simultaneously monitored (see
fcfLineV28AsynInDceMonitored2).
none : the circuits 105, 108 are not monitored,
rts105 : the circuit 105 (request to send) is
monitored,
dtr108 : the circuit 108 (108/1 connect data
set to line, 108/2 data terminal ready) is
monitored,
rts105-dtr108 : both circuits 105 and 108 are
monitored.
The default value is 'rts105'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.8.1.4 |
fcfLineV28AsynInDceSigMonitored2The value of this object defines which circuits
are monitored to eventually generate the
corresponding event when the state of one of them
changes. Main circuits may also be simultaneously
monitored (see fcfLineV28AsynInDceMonitored1).
none : the circuits 111, 140, 141 are not
monitored,
drs111 : the circuit 111 (data signal rate
selector) is monitored,
ril140 : the circuit 140 (loopback /
maintenance test) is monitored,
ll141 : the circuit 141 (local loopback) is
monitored.
The default value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.8.1.5 |
fcfLineV28DteSignalTableThis table defines how the incoming circuits are
monitored and interpreted on synchronous V28
serial line interfaces when the equipment is a
DTE.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfLineTable, to one instance of fcfLineType equal
to 'synchronousV28Dte'). SEQUENCE OF FcfLineV28DteSignalEntry .1.3.6.1.4.1.866.20.1.10.2.11 |
fcfLineV28DteSignalEntryAn entry of fcfLineV28DteSignalTable. FcfLineV28DteSignalEntry .1.3.6.1.4.1.866.20.1.10.2.11.1 |
fcfLineV28DteInterfaceIdThe value of this object identifies one and only
one synchronous V28 DTE serial line interface.
Each synchronous V28 DTE serial line interface
corresponds, in fcfLineTable, to one instance of
fcfLineType equal to 'synchronousV28Dte'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.11.1.1 |
fcfLineV28DteCts106The value of this object defines how the circuit
106 (ready fo sending) is monitored to eventually
generate the corresponding event when its state
changes and, when it is monitored, how it is
scanned to determine whether this serial line
interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'monitoredOn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.11.1.2 |
fcfLineV28DteDsr107The value of this object defines how the circuit
107 (data set ready) is monitored to eventually
generate the corresponding event when its state
changes and, when it is monitored, how it is
scanned to determine whether this serial line
interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'notMonitored'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.11.1.3 |
fcfLineV28DteDcd109The value of this object defines how the circuit
109 (data channel received line signal detector)
is monitored to eventually generate the
corresponding event when its state changes and,
when it is monitored, how it is scanned to
determine whether this serial line interface is up
or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'monitoredOn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.11.1.4 |
fcfLineV28DteSi117The value of this object defines how the circuit
117 (standby indicator) is monitored to eventually
generate the corresponding event when its state
changes and, when it is monitored, how it is
scanned to determine whether this serial line
interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'notMonitored'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.11.1.5 |
fcfLineV28DteTi142The value of this object defines how the circuit
142 (test indicator) is monitored to eventually
generate the corresponding event when its state
changes and, when it is monitored, how it is
scanned to determine whether this serial line
interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'notMonitored'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.11.1.6 |
fcfLineV28DteSynThe value of this object defines how the flags are
checked to determine whether this serial line
interface is up or down.
notMonitored : the flags are not checked,
monitoredOff : the flags are checked and they
must be not present to determine that this
serial line interface is in the UP state,
monitoredOn : the flags are checked and they
must be present to determine that this
serial line interface is in the UP state.
The default value is 'monitoredOn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.11.1.7 |
fcfLineV28DceSignalTableThis table defines how the incoming circuits are
monitored and interpreted on synchronous V28
serial line interfaces when the equipment is a
DCE.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfLineTable, to one instance of fcfLineType equal
to 'synchronousV28Dce'). SEQUENCE OF FcfLineV28DceSignalEntry .1.3.6.1.4.1.866.20.1.10.2.12 |
fcfLineV28DceSignalEntryAn entry of fcfLineV28DceSignalTable. FcfLineV28DceSignalEntry .1.3.6.1.4.1.866.20.1.10.2.12.1 |
fcfLineV28DceInterfaceIdThe value of this object identifies one and only
one synchronous V28 DCE serial line interface.
Each synchronous V28 DCE serial line interface
corresponds, in fcfLineTable, to one instance of
fcfLineType equal to 'synchronousV28Dce'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.12.1.1 |
fcfLineV28DceRts105The value of this object defines how the circuit
105 (request to send) is monitored to eventually
generate the corresponding event when its state
changes and, when it is monitored, how it is
scanned to determine whether this serial line
interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'monitoredOn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.12.1.2 |
fcfLineV28DceDtr108The value of this object defines how the circuit
108 (108/1 connect data set to line, 108/2 data
terminal ready) is monitored to eventually
generate the corresponding event when its state
changes and, when it is monitored, how it is
scanned to determine whether this serial line
interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'monitoredOn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.12.1.3 |
fcfLineV28DceDrs111The value of this object defines how the circuit
111 (data signal rate selector) is monitored to
eventually generate the corresponding event when
its state changes and, when it is monitored, how
it is scanned to determine whether this serial
line interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'notMonitored'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.12.1.4 |
fcfLineV28DceRil140The value of this object defines how the circuit
140 (loopback / maintenance test) is monitored to
eventually generate the corresponding event when
its state changes and, when it is monitored, how
it is scanned to determine whether this serial
line interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'notMonitored'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.12.1.5 |
fcfLineV28DceLl141The value of this object defines how the circuit
141 (local loopback) is monitored to eventually
generate the corresponding event when its state
changes and, when it is monitored, how it is
scanned to determine whether this serial line
interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'notMonitored'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.12.1.6 |
fcfLineV28DceSynThe value of this object defines how the flags are
checked to determine whether this serial line
interface is up or down.
notMonitored : the flags are not checked,
monitoredOff : the flags are checked and they
must be not present to determine that this
serial line interface is in the UP state,
monitoredOn : the flags are checked and they
must be present to determine that this
serial line interface is in the UP state.
The default value is 'monitoredOn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.12.1.7 |
fcfLineV11DteSignalTableThis table defines how the incoming circuits are
monitored and interpreted on synchronous V11
serial line interfaces when the equipment is a
DTE.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfLineTable, to one instance of fcfLineType equal
to 'synchronousV11Dte'). SEQUENCE OF FcfLineV11DteSignalEntry .1.3.6.1.4.1.866.20.1.10.2.15 |
fcfLineV11DteSignalEntryAn entry of fcfLineV11DteSignalTable. FcfLineV11DteSignalEntry .1.3.6.1.4.1.866.20.1.10.2.15.1 |
fcfLineV11DteInterfaceIdThe value of this object identifies one and only
one synchronous V11 DTE serial line interface.
Each synchronous V11 DTE serial line interface
corresponds, in fcfLineTable, to one instance of
fcfLineType equal to 'synchronousV11Dte'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.15.1.1 |
fcfLineV11DteIndication109The value of this object defines how the circuit
109 (I, indication) is monitored to eventually
generate the corresponding event when its state
changes and, when it is monitored, how it is
scanned to determine whether this serial line
interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'monitoredOn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.15.1.2 |
fcfLineV11DteSynThe value of this object defines how the flags are
checked to determine whether this serial line
interface is up or down.
notMonitored : the flags are not checked,
monitoredOff : the flags are checked and they
must be not present to determine that this
serial line interface is in the UP state,
monitoredOn : the flags are checked and they
must be present to determine that this
serial line interface is in the UP state.
The default value is 'notMonitored'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.15.1.3 |
fcfLineV11DceSignalTableThis table defines how the incoming circuits are
monitored and interpreted on synchronous V11
serial line interfaces when the equipment is a
DCE.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfLineTable, to one instance of fcfLineType equal
to 'synchronousV11Dce'). SEQUENCE OF FcfLineV11DceSignalEntry .1.3.6.1.4.1.866.20.1.10.2.16 |
fcfLineV11DceSignalEntryAn entry of fcfLineV11DceSignalTable. FcfLineV11DceSignalEntry .1.3.6.1.4.1.866.20.1.10.2.16.1 |
fcfLineV11DceInterfaceIdThe value of this object identifies one and only
one synchronous V11 DCE serial line interface.
Each synchronous V11 DCE serial line interface
corresponds, in fcfLineTable, to one instance of
fcfLineType equal to 'synchronousV11Dce'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.16.1.1 |
fcfLineV11DceControl105The value of this object defines how the circuit
105 (C, control) is monitored to eventually
generate the corresponding event when its state
changes and, when it is monitored, how it is
scanned to determine whether this serial line
interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'monitoredOn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.16.1.2 |
fcfLineV11DceSynThe value of this object defines how the flags are
checked to determine whether this serial line
interface is up or down.
notMonitored : the flags are not checked,
monitoredOff : the flags are checked and they
must be not present to determine that this
serial line interface is in the UP state,
monitoredOn : the flags are checked and they
must be present to determine that this
serial line interface is in the UP state.
The default value is 'notMonitored'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.16.1.3 |
fcfLineV35DteSignalTableThis table defines how the incoming circuits are
monitored and interpreted on V35 serial line
interfaces when the equipment is a DTE.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfLineTable, to one instance of fcfLineType equal
to 'v35Dte'). SEQUENCE OF FcfLineV35DteSignalEntry .1.3.6.1.4.1.866.20.1.10.2.19 |
fcfLineV35DteSignalEntryAn entry of fcfLineV35DteSignalTable. FcfLineV35DteSignalEntry .1.3.6.1.4.1.866.20.1.10.2.19.1 |
fcfLineV35DteInterfaceIdThe value of this object identifies one and only
one V35 DTE serial line interface. Each V35 DTE
serial line interface corresponds, in
fcfLineTable, to one instance of fcfLineType equal
to 'v35Dte'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.19.1.1 |
fcfLineV35DteD106The value of this object defines how the circuit
106 (pin D, ready fo sending) is monitored to
eventually generate the corresponding event when
its state changes and, when it is monitored, how
it is scanned to determine whether this serial
line interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'monitoredOn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.19.1.2 |
fcfLineV35DteE107The value of this object defines how the circuit
107 (pin E, data set ready) is monitored to
eventually generate the corresponding event when
its state changes and, when it is monitored, how
it is scanned to determine whether this serial
line interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'notMonitored'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.19.1.3 |
fcfLineV35DteF109The value of this object defines how the circuit
109 (pin F, data channel received line signal
detector) is monitored to eventually generate the
corresponding event when its state changes and,
when it is monitored, how it is scanned to
determine whether this serial line interface is up
or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'monitoredOn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.19.1.4 |
fcfLineV35DteTi142The value of this object defines how the circuit
142 (pin NN, test indicator) is monitored to
eventually generate the corresponding event when
its state changes and, when it is monitored, how
it is scanned to determine whether this serial
line interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'notMonitored'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.19.1.5 |
fcfLineV35DteSynThe value of this object defines how the flags are
checked to determine whether this serial line
interface is up or down.
notMonitored : the flags are not checked,
monitoredOff : the flags are checked and they
must be not present to determine that this
serial line interface is in the UP state,
monitoredOn : the flags are checked and they
must be present to determine that this
serial line interface is in the UP state.
The default value is 'monitoredOn'..rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.19.1.6 |
fcfLineV35DceSignalTableThis table defines how the incoming circuits are
monitored and interpreted on V35 serial line
interfaces when the equipment is a DCE.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfLineTable, to one instance of fcfLineType equal
to 'v35Dce'). SEQUENCE OF FcfLineV35DceSignalEntry .1.3.6.1.4.1.866.20.1.10.2.20 |
fcfLineV35DceSignalEntryAn entry of fcfLineV35DceSignalTable. FcfLineV35DceSignalEntry .1.3.6.1.4.1.866.20.1.10.2.20.1 |
fcfLineV35DceInterfaceIdThe value of this object identifies one and only
one V35 DCE serial line interface. Each V35 DCE
serial line interface corresponds, in
fcfLineTable, to one instance of fcfLineType equal
to 'v35Dce'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.20.1.1 |
fcfLineV35DceC105The value of this object defines how the circuit
105 (pin C, request to send) is monitored to
eventually generate the corresponding event when
its state changes and, when it is monitored, how
it is scanned to determine whether this serial
line interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'monitoredOn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.20.1.2 |
fcfLineV35DceH108The value of this object defines how the circuit
108 (pin H, 108/1 connect data set to line, 108/2
data terminal ready) is monitored to eventually
generate the corresponding event when its state
changes and, when it is monitored, how it is
scanned to determine whether this serial line
interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'monitoredOn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.20.1.3 |
fcfLineV35DceRil140The value of this object defines how the circuit
140 (pin N, loopback / maintenance test) is
monitored to eventually generate the corresponding
event when its state changes and, when it is
monitored, how it is scanned to determine whether
this serial line interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'notMonitored'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.20.1.4 |
fcfLineV35DceLl141The value of this object defines how the circuit
141 (pin L, local loopback) is monitored to
eventually generate the corresponding event when
its state changes and, when it is monitored, how
it is scanned to determine whether this serial
line interface is up or down.
notMonitored : this circuit is not used,
monitoredNotSignificant : this circuit is
monitored (eventually events are
generated) but it is not scanned to
determine the state of this serial line
interface,
monitoredOff : this circuit is monitored
(eventually events are generated) and it
must be in the OFF condition to determine
that this serial line interface is in the
UP state,
monitoredOn : this circuit is monitored
(eventually events are generated) and it
must be in the ON condition to determine
that this serial line interface is in the
UP state.
The default value is 'notMonitored'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.20.1.5 |
fcfLineV35DceSynThe value of this object defines how the flags are
checked to determine whether this serial line
interface is up or down.
notMonitored : the flags are not checked,
monitoredOff : the flags are checked and they
must be not present to determine that this
serial line interface is in the UP state,
monitoredOn : the flags are checked and they
must be present to determine that this
serial line interface is in the UP state.
The default value is 'monitoredOn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.20.1.6 |
fcfLineModem OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.10.2.30 |
fcfLineModemTableThis table defines, for each serial line interface
facing to a modem, how this modem is managed.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfLineTable, to one instance of
fcfLineModemManagement equal to 'on'). SEQUENCE OF FcfLineModemEntry .1.3.6.1.4.1.866.20.1.10.2.30.1 |
fcfLineModemEntryAn entry of fcfLineModemTable. FcfLineModemEntry .1.3.6.1.4.1.866.20.1.10.2.30.1.1 |
fcfLineModInterfaceIdThe value of this object identifies one and only
one serial line interface facing to a modem. Each
of these serial line interfaces corresponds, in
fcfLineTable, to one instance of
fcfLineModemManagement equal to 'on'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.30.1.1.1 |
fcfLineModTypeThe value of this object defines how the automatic
calling and/or answering data stations is operated
on this serial line interface :
direct : The 'direct call and/or answer
controlled by the DTE (circuit 108/1)'
mode gives to the equipment (in DTE mode)
the capacity of calling a number
pre-recorded in the modem (in DCE mode),
by means of the 108/1 control circuit. It
gives also to the equipment the capacity
of accepting incoming calls on a'per call'
basis.
addressedAt : The 'addressed call and/or answer
authorized by the DTE (circuit 108/2)'
mode gives to the equipment (in DTE mode)
extensive facilities by means of
instructions exchanged between the DTE and
the DCE on circuits 103 (transmitted data)
and 104 (received data). It gives also to
the equipment the capacity to accept 'a
priori' an incoming call. The commands /
indications use the AT format.
addressedV25Bis : The 'addressed call and/or
answer authorized by the DTE (circuit
108/2)' mode gives to the equipment (in
DTE mode) extensive facilities by means of
instructions exchanged between the DTE and
the DCE on circuits 103 (transmitted data)
and 104 (received data). It gives also to
the equipment the capacity to accept 'a
priori' an incoming call. The commands /
indications use the ITU-T V.25 bis
recommendation format.
The default value is 'addressedV25Bis'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.30.1.1.2 |
fcfLineModLinkUpTimerThe value of this object is the management timer
in seconds for this serial line interface. It
starts when the first call request is sent to the
modem and it is normally stopped when the serial
line interface is 'up'. The serial line interface
state is set to 'down' when this timer runs out.
The value of this timer must be larger than the
total duration of the successive dialling attempts
to not interrupt this processing (see
fcfLineModNewDiallingTimer and
fcfLineModDiallingCount).
This is a decimal integer in the range 1 to 250.
The default value is '180'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.2.30.1.1.3 |
fcfLineModNewDiallingTimerThe value of this object is the dialling timer in
seconds for this serial line interface. It starts
when a call request is sent to the modem and it is
normally stopped when the call is successfull or
when the modem answers with an error message. The
call request is sent again when this timer runs
out. After transmission of the call request
fcfLineModDiallingCount times the serial line
interface state is set to 'down'.
This is a decimal integer in the range 0 to 2500
by step of 10.
The default value is '30'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.2.30.1.1.4 |
fcfLineModDiallingCountThe value of this object is the maximum number of
attempts to complete a sucessfull call for this
serial line interface. A new call request is sent
to the modem when fcfLineModNewDiallingTimer runs
out.
This is a decimal integer in the range 0 to 250.
The default value is '3'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.2.30.1.1.5 |
fcfLineModUnuseTimerThe value of this object is the unuse timer in
seconds for this serial line interface. This
function is specified in order to clear a call
when no communications are established on it. This
timer starts upon the clearing of the last
communication using this call and it is normally
stopped when a new one is initiated. The equipment
clears the call when this timer runs out. The
value '0' disables the processing of this timer.
This is a decimal integer in the range 0 to 250 by
step of 10.
The default value is '10'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.2.30.1.1.6 |
fcfLineModSpeedThe value of this object indicates the speed in
bits per second used between the equipment and the
modem for this serial line interface. The other
characteristics of this communication are : no
parity, one stop bit, eight bits per character.
The default value is 's9600'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.30.1.1.7 |
fcfLineModCallDirectionThe value of this object defines the mode used to
establish the connection with the remote system
for this serial line interface :
calling : the caller is the equipment,
called : the caller is the remote system,
auto : automatic choise between 'calling' and
'called' (not accepted when fcfLineModType
is set to 'direct').
The default value is 'auto'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.30.1.1.8 |
fcfLineModInitStringThe value of this object is a characters string
sent by the equipment to the modem when the state
of this serial line interface becomes 'up'.
This is a 0 to 50 ASCII characters string.
The default value is the empty string.rw DisplayString .1.3.6.1.4.1.866.20.1.10.2.30.1.1.9 |
fcfLineModOutputXidStringThe value of this object indicates, for this
serial line interface, whether an XID string is
sent by the equipment or not prior to the
estblishment of any virtual call (exchange
identification procedure). This XID string is
defined by fcfLineModOutputXidStringId. This
mechanism may be enabled only when this serial
line interface is used by the X25 protocol.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.30.1.1.10 |
fcfLineModOutputXidStringIdThe value of this object indicates, for this
serial line interface, which XID string will be
sent by the equipment prior to the estblishment of
any virtual call (exchange identification
procedure). This XID string is defined in
fcfLineModXidStringTable.
This is a decimal integer in the range 0 to 3.
The default value is '255' meaning 'empty value'
(blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.10.2.30.1.1.11 |
fcfLineModInputXidStringThe value of this object indicates, for this
serial line interface, whether an XID string will
be received by the equipment or not prior to the
estblishment of any virtual call (exchange
identification procedure). If yes
fcfLineModInputXidStringCount defines how many XID
strings will be received. This mechanism may be
enabled only when this serial line interface is
used by the X25 protocol.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.30.1.1.12 |
fcfLineModInputXidStringCountThe value of this object defines, for this serial
line interface, how many XID strings will be
received by the equipment prior to the
estblishment of any virtual call (exchange
identification procedure) if this mechanism is
enabled (see fcfLineModInputXidString).
This is a decimal integer in the range 0 to 250.
The default value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.2.30.1.1.13 |
fcfLineModXidStringTableThis table contains the XID strings that are sent
by the equipment prior to the estblishment of any
virtual call (exchange identification procedure)
on serial line interfaces according to
fcfLineModOutputXidString. An XID string,
identified by fcfLineModXidStringId, is the
concatenation, in ascending order of
fcfLineModXidStringEltNum, of 1 to 4 elements of 0
to 32 bytes.
Set any writable object(s) of this table to valid
value(s) with a new index value to create an entry
(the objects of the entry not present in this SET
REQUEST will take their default values). Set
fcfLineModXidStringEltStatus to 'invalid' to
delete an entry. SEQUENCE OF FcfLineModXidStringEntry .1.3.6.1.4.1.866.20.1.10.2.30.2 |
fcfLineModXidStringEntryAn entry of fcfLineModXidStringTable. FcfLineModXidStringEntry .1.3.6.1.4.1.866.20.1.10.2.30.2.1 |
fcfLineModXidStringIdThe value of this object identifies one and only
one XID string which is sent by the equipment
prior to the estblishment of any virtual call
(exchange identification procedure) on serial line
interfaces according to fcfLineModOutputXidString.
This XID string is the concatenation, in ascending
order of fcfLineModXidStringEltNum, of 1 to 4
elements of 0 to 32 bytes.
This is a decimal integer in the range 0 to 3.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.30.2.1.1 |
fcfLineModXidStringEltNumThe value of this object identifies one and only
one element of this XID string. The whole XID
string is the concatenation, in ascending order of
this value, of all of its elements.
This is a decimal integer in the range 1 to 4.ro INTEGER .1.3.6.1.4.1.866.20.1.10.2.30.2.1.2 |
fcfLineModXidStringEltStatusThe value of this object indicates the state of
the entry of this table. It must be set to
'invalid' to delete the entry.
The default value is 'valid'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.2.30.2.1.3 |
fcfLineModXidStringElementThe value of this object contains the bytes of
this element of this XID string. The whole XID
string is the concatenation, in ascending order of
fcfLineModXidStringEltNum, of all of its elements.
This is a thirty-three-bytes octet string with up
to 66 digits in the range 0 to F. The first byte
contains the number of following useful bytes. It
must be padded with 'F' digits for a total of 66
digits.
The equipment configurator does not need this
final padding neither the first byte (which is
automatically updated).
The default value is 'empty' : first byte set to
'00', others set to 'FF' (blank value on the
equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.10.2.30.2.1.4 |
fcfLineDVBTable SEQUENCE OF FcfLineDVBEntry .1.3.6.1.4.1.866.20.1.10.2.31 |
fcfLineDVBEntryAn entry of fcfLineDVBTable. FcfLineDVBEntry .1.3.6.1.4.1.866.20.1.10.2.31.1 |
fcfLineDVBInterfaceIdIF idro INTEGER .1.3.6.1.4.1.866.20.1.10.2.31.1.1 |
fcfLineDVBStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.10.2.31.1.2 |
fcfLineDVBConnectionLink with DVBrw Enumeration .1.3.6.1.4.1.866.20.1.10.2.31.1.3 |
fcfIsdn OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.10.5 |
fcfIsdnBasicRateInterfaceTableThis table defines the characteristics of the
integrated services digital network (ISDN) basic
rate interfaces (BRI).
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfPhysicalPortTable, to one instance of
fcfInterfaceType equal to 'isdnDChannel'). SEQUENCE OF FcfIsdnBasicRateInterfaceEntry .1.3.6.1.4.1.866.20.1.10.5.1 |
fcfIsdnBasicRateInterfaceEntryAn entry of fcfIsdnBasicRateInterfaceTable. FcfIsdnBasicRateInterfaceEntry .1.3.6.1.4.1.866.20.1.10.5.1.1 |
fcfIsdnBasicRateInterfaceIdThe value of this object identifies one and only
one integrated services digital network (ISDN)
basic rate interface (BRI). Each ISDN BRI
corresponds, in fcfPhysicalPortTable, to one
instance of fcfInterfaceType equal to
'isdnDChannel' or 'isdnBri'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.5.1.1.1 |
fcfIsdnBriSignallingThe value of this object indicates, for this basic
rate interface, whether signalling is enabled or
not. It must be set to 'on' to use the B-channels.
The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.5.1.1.2 |
fcfIsdnBriCountryThe value of this object permits to take into
account the national characteristics of some ISDN
implementations :
franceVn2 : France VN 2 implementation,
franceVn3 : France VN 3 implementation,
franceVn4 : France VN 4 implementation,
unitedKingdom : France VN 2 implementation,
switzerland : Switzerland implementation,
europeanIsdn : Europe implementation.
japan : japan implementation.
usa : usa implementation.
The default value is 'europeanIsdn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.5.1.1.3 |
fcfIsdnBriInterfaceCheckPeriodThe value of this object indicates a period in
milliseconds of detection of power source 1 or
power source 2, whichever may be provided for this
basic rate interface. The power source is checked
every fcfIsdnBriInterfaceCheckPeriod milliseconds
and when it changes and remains changed after
fcfIsdnBriFilterRepeatCount checkings, this new
state is delivered to the upper level.
This is a decimal integer in the range 0 to 51000
by step of 200.
The default value is '200'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.1.1.4 |
fcfIsdnBriFilterRepeatCountThe value of this object indicates the number of
detections of power source 1 or power source 2,
whichever may be provided for this basic rate
interface. The power source is checked every
fcfIsdnBriInterfaceCheckPeriod milliseconds and
when it changes and remains changed after
fcfIsdnBriFilterRepeatCount checkings, this new
state is delivered to the upper level.
This is a decimal integer in the range 0 to 255.
The default value is '2'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.1.1.5 |
fcfIsdnBriEnablingTimerThe value of this object is the activation timer
in milliseconds for this basic rate interface
(timer 3). The deactivation function is specified
in order to permit this interface and the
network-side interface to be placed in a low power
consumption mode when no calls are in progress.
This timer starts upon the reception of an
ACTIVATE REQUEST by the layer 1 and it is normally
stopped when the ACTIVATED state is reached. The
equipment sends DEACTIVATE INDICATIONS when this
timer runs out
This is a decimal integer in the range 200 to
30000 by step of 200.
The default value is '10000'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.1.1.6 |
fcfIsdnBriDisablingTimerThe value of this object is the deactivation delay
in milliseconds for this basic rate interface. The
deactivation function is specified in order to
permit this interface and the network-side
interface to be placed in a low power consumption
mode when no calls are in progress. The layer 2 is
informed of the reception of an DEACTIVATE
INDICATION by the layer 1 when this delay runs
out.
This is a decimal integer in the range 0 to 1000
by step of 200.
The default value is '600'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.1.1.7 |
fcfIsdnPrimaryRateInterfaceTable SEQUENCE OF FcfIsdnPrimaryRateInterfaceEntry .1.3.6.1.4.1.866.20.1.10.5.2 |
fcfIsdnPrimaryRateInterfaceEntryAn entry of fcfIsdnPrimaryRateInterfaceTable. FcfIsdnPrimaryRateInterfaceEntry .1.3.6.1.4.1.866.20.1.10.5.2.1 |
fcfIsdnPrimaryRateInterfaceIdThe value of this object identifies one and only
one integrated services digital network (ISDN)
primary rate interface (PRI). Each ISDN PRI
corresponds, in fcfPhysicalPortTable, to one
instance of fcfInterfaceType equal to 'isdnPri'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.5.2.1.1 |
fcfIsdnPriSignallingThe value of this object indicates, for this
primary rate interface, whether signalling is
enabled or not. It must be set to 'on' to use the
B-channels.
The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.5.2.1.2 |
fcfIsdnPriCountryThe value of this object permits to take into
account the national characteristics of some ISDN
implementations :
franceVn2 : France VN 2 implementation,
franceVn3 : France VN 3 implementation,
franceVn4 : France VN 4 implementation,
unitedKingdom : France VN 2 implementation,
switzerland : Switzerland implementation,
europeanIsdn : Europe implementation.
japan : japan implementation.
usa : usa implementation.
The default value is 'europeanIsdn'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.5.2.1.3 |
fcfIsdnPriINbBChannelThe value of this object is the number of B
channels for this ISDN primary rate interface.
This is a decimal integer in the range 0 to 30 by
step of 1.
The default value is '30'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.2.1.10 |
fcfIsdnPriCrc4The value of this object indicates, for this
primary rate interface, whether cyclic redundancy
code management is enabled or not.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.5.2.1.11 |
fcfIsdnDChannelSignallingTableThis table defines the signalling characteristics
of the integrated services digital network (ISDN)
basic rate interfaces (BRI).
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfIsdnBasicRateInterfaceTable, to one instance of
fcfIsdnBriSignalling equal to 'on'). SEQUENCE OF FcfIsdnDChannelSignallingEntry .1.3.6.1.4.1.866.20.1.10.5.10 |
fcfIsdnDChannelSignallingEntryAn entry of fcfIsdnDChannelSignallingTable. FcfIsdnDChannelSignallingEntry .1.3.6.1.4.1.866.20.1.10.5.10.1 |
fcfIsdnDSigIsdnInterfaceIdThe value of this object identifies one and only
one integrated services digital network (ISDN)
basic rate interface (BRI) with signalling
procedures. Each ISDN BRI corresponds, in
fcfIsdnBasicRateInterfaceTable, to one instance of
fcfIsdnBriSignalling equal to 'on'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.5.10.1.1 |
fcfIsdnDSigIsdnNumberThe value of this object indicates the ISDN
address (the ISDN number and the optional
subaddress) of this basic rate interface.
This is a eleven-bytes octet string with :
up to 16 digits in the range 0 to 9 for the
ISDN number,
an optional separator marking the end of the
ISDN number and the beginning of the ISDN
subaddress : digit 'A' (':' on the
equipment configurator),
optional 1 to 4 digits in the range 0 to 9 for
the ISDN subaddress,
mandatory 'F' digits to pad the value until a
total of 22 digits (the equipment
configurator does not need this final
padding).
The default value is 'FF FF FF FF FF FF FF FF FF
FF FF' meaning 'empty value' (blank value on the
equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.10.5.10.1.2 |
fcfIsdnDSigUnuseTimerThe value of this object is the unuse timer in
seconds for this basic rate interface. This
function is specified in order to clear a call
when no communications are established on it. This
timer starts upon the clearing of the last
communication using this call and it is normally
stopped when a new one is initiated. The equipment
clears the call when this timer runs out. The
value '0' disables the processing of this timer.
This is a decimal integer in the range 0 to 2550
by step of 10.
The default value is '10'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.10.1.3 |
fcfIsdnDSigCalledSubAddressCheckThe value of this object indicates, for this basic
rate interface, whether ISDN subaddresses are
checked or not. When it is set to 'on' the
incoming calls are cleared if the called party
subaddress is not present in the SETUP message.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.5.10.1.4 |
fcfIsdnDSigDirectInwardDialingCheckThe value of this object indicates, for this basic
rate interface, whether the direct dialling-in
(DDI) service is used or not. When the direct
dialling-in is in use, this basic rate interface
accepts only the incoming calls with the called
party number equal to its own ISDN number defined
by fcfIsdnDSigIsdnNumber (the ISDN subaddress is
not concerned).
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.5.10.1.5 |
fcfIsdnDSigInactivityTimerThe value of this object is the inactivity timer
in seconds for this basic rate interface. This
timer starts upon the establishment of the call
and it restarts at each expiry if no trafic has
been using it during this period.. The value '0'
disables the processing of this timer.
This is a decimal integer in the range 0 to 120.
The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.10.1.6 |
fcfIsdnDSigMulDialsRetryTimerThe value of this object is the retry timer in
seconds for this basic rate interface. To reach a
particular destination the equipment may
successively try one or several times to call one
remote ISDN interfaces. This timer starts when a
call is initiated towards a particular remote ISDN
interface and it is normally stopped when this
call is successfull. A new call towards this
remote ISDN interface is initated when this timer
runs out.
This is a decimal integer in the range 1 to 254.
The default value is '5'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.10.1.10 |
fcfIsdnDSigMulDialsCycleTimerThe value of this object is the cycle timer in
seconds for this basic rate interface. To reach a
particular destination the equipment may
successively try one or several times to call one
or several remote ISDN interfaces. This is a cycle
of calls and there may be several identical
cycles. The cycle timer starts when a cycle of
calls is initiated and it is normally stopped when
one call is successfull. A new cycle of calls is
initated when this timer runs out.
This is a decimal integer in the range 1 to 254.
The default value is '10'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.10.1.11 |
fcfIsdnDSigMulDialsCycleCountThe value of this object is the maximum number of
cycle of calls for this basic rate interface. To
reach a particular destination the equipment may
successively try one or several times to call one
or several remote ISDN interfaces. This is a cycle
of calls and there may be several identical
cycles.
This is a decimal integer in the range 1 to 255.
The default value is '3'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.10.1.12 |
fcfIsdnDSigMulDialsTotalDurationThe value of this object is, for this basic rate
interface, the maximum duration in seconds of
successive tries to reach a destination. To reach
a particular destination the equipment may
successively try one or several times to call one
or several remote ISDN interfaces. This is a cycle
of calls and there may be several identical
cycles. This timer starts when the first cycle of
calls is initiated and it is normally stopped when
one call is successfull. If this timer runs out
the destination is said unreachable.
This is a decimal integer in the range 5 to 100.
The default value is '100'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.10.1.13 |
fcfIsdnDSigLowLayerCompatibilityThe value of this object indicates whether the low
layer compatibility information element (LLC IE)
is present or not in the CONNECT and SETUP call
establishment messages sent from this basic rate
interface (outgoing call) and whether it is
checked or not in the same messages received by
this basic rate interface (incoming call).
The checking of LLC IE in the incoming calls is
made as described below :
the coding standard must be set to 'CCITT
standardized coding',
the information transfer capability must be set
to 'unrestricted digital information',
the transfer mode must be set to 'circuit
mode',
the information transfer rate must be set to
'64 kbit/s',
the user information layer 1 protocol must be
set to 'CCITT standardized rate adaption
X.31 HDLC flag stuffing',
the user information layer 2 protocol must be
set to 'CCITT Recommendation X.25 link
layer' or 'CCITT Recommendation X.25
multilink',
the user information layer 3 protocol must be
set to 'CCITT Recommendation X.25 packet
layer',
the other octets of the LLC IE are not checked,
This object may be set to one of the following
values :
notTransmittedAndNotChecked : the LLC IE is not
present in the outgoing calls and it is
not checked in the incoming calls,
transmittedAndNotChecked : the LLC IE is
present in the outgoing calls and it is
not checked in the incoming calls,
notTransmittedAndChecked : the LLC IE is not
present in the outgoing calls and it is
checked in the incoming calls,
transmittedAndChecked : the LLC IE is present
in the outgoing calls and it is checked in
the incoming calls.
The default value is 'notTransmittedAndChecked'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.5.10.1.20 |
fcfIsdnDSigHighLayerCompatibilityThe value of this object indicates whether the
high layer compatibility information element (HLC
IE) is present or not in the SETUP call
establishment messages sent from this basic rate
interface (outgoing call) and whether it is
checked or not in the same messages received by
this basic rate interface (incoming call).
The checking of HLC IE in the incoming calls
consists in verifying that the HLC IE is equal to
the value of fcfIsdnDSigHighLayerCharactIdent.
This object may be set to one of the following
values :
notTransmittedAndNotChecked : the HLC IE is not
present in the outgoing calls and it is
not checked in the incoming calls,
transmittedAndNotChecked : the HLC IE is
present in the outgoing calls and it is
not checked in the incoming calls,
notTransmittedAndChecked : the HLC IE is not
present in the outgoing calls and it is
checked in the incoming calls,
transmittedAndChecked : the HLC IE is present
in the outgoing calls and it is checked in
the incoming calls.
The default value is 'notTransmittedAndChecked'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.5.10.1.21 |
fcfIsdnDSigHighLayerCharactIdentThe value of this object indicates the value of
the high layer compatibility information element
(HLC IE) which must be present in the SETUP call
establishment messages received by this basic rate
interface (incoming call) when the checking is
enabled (see fcfIsdnDSigHighLayerCompatibility) :
ccittOsiApplication :
the coding standard must be set to 'CCITT
standardized coding',
the interpretation must be set to 'first
(primary only) high layer characteristics
identification to be used in the call',
the presentation method of protocol profile
must be set to 'high layer protocol
profile (without specification of
attributes)',
the high layer characteristics identification
must be set to 'OSI application
(recommendation X.200 series)',
nationalUnknownNetworkedService :
the coding standard must be set to 'national
standard (only when the desired HLC cannot
be represented with the CCITT-standardized
coding)',
the interpretation must be set to 'first
(primary only) high layer characteristics
identification to be used in the call',
the presentation method of protocol profile
must be set to 'high layer protocol
profile (without specification of
attributes)',
the high layer characteristics identification
must be set to 'unknown networked
service',
nationalNotStandardizedApplication :
the coding standard must be set to 'national
standard (only when the desired HLC cannot
be represented with the CCITT-standardized
coding)',
the interpretation must be set to 'first
(primary only) high layer characteristics
identification to be used in the call',
the presentation method of protocol profile
must be set to 'high layer protocol
profile (without specification of
attributes)',
the high layer characteristics identification
must be set to 'not standardized
application',
The default value is 'notTransmittedAndChecked'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.5.10.1.22 |
fcfIsdnDChannelSigTimerTableThis table defines the signalling timers of the
integrated services digital network (ISDN) basic
rate interfaces (BRI).
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcfIsdnBasicRateInterfaceTable, to one instance of
fcfIsdnBriSignalling equal to 'on'). SEQUENCE OF FcfIsdnDChannelSigTimerEntry .1.3.6.1.4.1.866.20.1.10.5.11 |
fcfIsdnDChannelSigTimerEntryAn entry of fcfIsdnDChannelSigTimerTable. FcfIsdnDChannelSigTimerEntry .1.3.6.1.4.1.866.20.1.10.5.11.1 |
fcfIsdnDTimIsdnInterfaceIdThe value of this object identifies one and only
one integrated services digital network (ISDN)
basic rate interface (BRI) with signalling
procedures. Each ISDN BRI corresponds, in
fcfIsdnBasicRateInterfaceTable, to one instance of
fcfIsdnBriSignalling equal to 'on'.
This is a decimal integer in the range 0 to 35.ro INTEGER .1.3.6.1.4.1.866.20.1.10.5.11.1.1 |
fcfIsdnDTimBChannelUpTimerThe value of this object is the up state timer in
seconds for this basic rate interface. This timer
starts when the ISDN call is successfull (i.e., a
B-channel is established) and it is normally
stopped when the protocol stack layered on this
B-channel is in the up state. The call is cleared
when this timer runs out.
This is a decimal integer in the range 1 to 2550
by step of 10.
The default value is '60'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.11.1.2 |
fcfIsdnDTimT301AlertConnectTimerThe value of this object is the T301 timer in
seconds for this basic rate interface. This timer
starts when an ALERTING call establishment message
is received and it is normally stopped when a
CONNECT message is received. The call is cleared
when this timer runs out.
This is a decimal integer in the range 1 to 2550
by step of 10.
The default value is '20'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.11.1.10 |
fcfIsdnDTimT303SetupResponseTimerThe value of this object is the T303 timer in
seconds for this basic rate interface. This timer
starts when a SETUP call establishment message is
sent and it is normally stopped when an ALERTING,
CONNECT, SETUP ACKNOWLEDGE, CALL PROCEEDING or
RELEASE COMPLETE message is received. When this
timer runs out for the first time the equipment
retransmits the SETUP message and restarts this
timer. When this timer runs out for the second
time the equipment clears the call.
This is a decimal integer in the range 1 to 255.
The default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.11.1.11 |
fcfIsdnDTimT305DisconnectResponseTimerThe value of this object is the T305 timer in
seconds for this basic rate interface. This timer
starts when a DISCONNECT call clearing message is
sent and it is normally stopped when a RELEASE or
DISCONNECT message is received. When this timer
runs out the equipment sent a RELEASE message.
This is a decimal integer in the range 1 to 255.
The default value is '30'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.11.1.12 |
fcfIsdnDTimT308ReleaseResponseTimerThe value of this object is the T308 timer in
seconds for this basic rate interface. This timer
starts when a RELEASE call clearing message is
sent and it is normally stopped when a RELEASE
COMPLETE or RELEASE message is received. When this
timer runs out for the first time the equipment
retransmits the RELEASE message and restarts this
timer. When this timer runs out for the second
time the equipment places the B-channel in
maintenance condition.
This is a decimal integer in the range 1 to 255.
The default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.11.1.13 |
fcfIsdnDTimT309DataLinkFailureTimerThe value of this object is the T309 timer in
seconds for this basic rate interface. This timer
starts when the data link is disconnected and it
is normally stopped when it is reconnected. The
call is cleared when this timer runs out.
This is a decimal integer in the range 0 to 180.
The default value is '60'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.11.1.14 |
fcfIsdnDTimT310CallProceedingTimerThe value of this object is the T310 timer in
seconds for this basic rate interface. This timer
starts when a CALL PROCEEDING call establishment
message is received and it is normally stopped
when an ALERTING, CONNECT, DISCONNECT or PROGRESS
message is received. The DISCONNECT message is
sent when this timer runs out.
This is a decimal integer in the range 1 to 255.
The default value is '40'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.11.1.15 |
fcfIsdnDTimT313ConnectAcknowledgeTimerThe value of this object is the T313 timer in
seconds for this basic rate interface. This timer
starts when a CONNECT call establishment message
is sent and it is normally stopped when a CONNECT
ACKNOWLEDGE message is received. The DISCONNECT
message is sent when this timer runs out.
This is a decimal integer in the range 1 to 255.
The default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.10.5.11.1.16 |
fcfIsdnRemotePeerTableThis table contains the interfaces which may be
connected to the equipment through an ISDN. Each
of these remote ISDN interfaces is identified by a
decimal integer in the range 0 to 249.
Set any writable object(s) of this table to valid
value(s) with a new index value to create an entry
(the objects of the entry not present in this SET
REQUEST will take their default values). Set
fcfIsdnRemStatus to 'invalid' to delete an entry. SEQUENCE OF FcfIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.10.5.20 |
fcfIsdnRemotePeerEntryAn entry of fcfIsdnRemotePeerTable. FcfIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.10.5.20.1 |
fcfIsdnRemRemotePeerIdThe value of this object identifies one and only
one remote ISDN interface which may be connected
to the equipment through an ISDN.
This is a decimal integer in the range 0 to 249 in
releases before 4.2, in the range 0 to 999 after.ro INTEGER .1.3.6.1.4.1.866.20.1.10.5.20.1.1 |
fcfIsdnRemStatusThe value of this object indicates the state of
the entry of this table. It must be set to
'invalid' to delete the entry.
The default value is 'valid'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.5.20.1.2 |
fcfIsdnRemIsdnNumberThe value of this object is the ISDN address (the
ISDN number and the optional subaddress) of this
remote ISDN interface.
This is a eleven-bytes octet string with :
up to 16 digits in the range 0 to 9 for the
ISDN number,
an optional separator marking the end of the
ISDN number and the beginning of the ISDN
subaddress : digit 'A' (':' on the
equipment configurator),
optional 1 to 4 digits in the range 0 to 9 for
the ISDN subaddress,
mandatory 'F' digits to pad the value until a
total of 22 digits (the equipment
configurator does not need this final
padding).
This value is automatically completed by a
selection of digits from the X121 address when
this X121 address contains two digits 'A' (':' on
the equipment configurator) to make the complete
ISDN address. See, in the fcLogicalPorts group,
the tables which defines the connections to the
ISDN remote interfaces.
The default value is 'FF FF FF FF FF FF FF FF FF
FF FF' meaning 'empty value' (blank value on the
equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.10.5.20.1.3 |
fcfIsdnRemCallDirectionThe value of this object defines the mode used to
establish the call with this remote ISDN interface
:
calling : the caller is one of the ISDN
interface of the equipment,
called : the caller is this remote ISDN
interface,
auto : automatic choise between 'calling' and
'called'.
The default value is 'auto'.rw Enumeration .1.3.6.1.4.1.866.20.1.10.5.20.1.4 |
fcfE1Ds1 OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.10.15 |
fcfE1Ds1PhysTable SEQUENCE OF FcfE1Ds1PhysEntry .1.3.6.1.4.1.866.20.1.10.15.1 |
fcfE1Ds1PhysEntryAn entry of fcfE1Ds1PhysTable. FcfE1Ds1PhysEntry .1.3.6.1.4.1.866.20.1.10.15.1.1 |
fcfE1Ds1PhysIfIdIF E1 ou DS1 Physique idro INTEGER .1.3.6.1.4.1.866.20.1.10.15.1.1.1 |
fcfE1Ds1PhysStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.10.15.1.1.2 |
fcfE1Ds1PhysPhysicalPortPP E1 ou DS1rw INTEGER .1.3.6.1.4.1.866.20.1.10.15.1.1.3 |
fcfE1PhysPortTable SEQUENCE OF FcfE1PhysPortEntry .1.3.6.1.4.1.866.20.1.10.15.3 |
fcfE1PhysPortEntryAn entry of fcfE1PhysPortTable. FcfE1PhysPortEntry .1.3.6.1.4.1.866.20.1.10.15.3.1 |
fcfE1PhysPortIdPP E1 If idro INTEGER .1.3.6.1.4.1.866.20.1.10.15.3.1.1 |
fcfE1PhysPortSynchSrcSynchronisation Sourcerw Enumeration .1.3.6.1.4.1.866.20.1.10.15.3.1.2 |
fcfE1PhysPortFramingFramingrw Enumeration .1.3.6.1.4.1.866.20.1.10.15.3.1.3 |
fcfE1PhysPortFlowTypeType de fluxrw Enumeration .1.3.6.1.4.1.866.20.1.10.15.3.1.4 |
fcfE1Ds1ChannelTable SEQUENCE OF FcfE1Ds1ChannelEntry .1.3.6.1.4.1.866.20.1.10.15.5 |
fcfE1Ds1ChannelEntryAn entry of fcfE1Ds1ChannelTable. FcfE1Ds1ChannelEntry .1.3.6.1.4.1.866.20.1.10.15.5.1 |
fcfE1Ds1ChannelIfIdIF E1 ou DS1 Canal idro INTEGER .1.3.6.1.4.1.866.20.1.10.15.5.1.1 |
fcfE1Ds1ChannelStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.10.15.5.1.2 |
fcfE1Ds1ChannelPhysIfInterface E1 ou DS1 Physiquerw INTEGER .1.3.6.1.4.1.866.20.1.10.15.5.1.3 |
fcfE1Ds1ChannelSlotsSlotsrw DisplayString .1.3.6.1.4.1.866.20.1.10.15.5.1.4 |
fcfE1Ds1DropInsertTable SEQUENCE OF FcfE1Ds1DropInsertEntry .1.3.6.1.4.1.866.20.1.10.15.10 |
fcfE1Ds1DropInsertEntryAn entry of fcfE1Ds1DropInsertTable. FcfE1Ds1DropInsertEntry .1.3.6.1.4.1.866.20.1.10.15.10.1 |
fcfE1Ds1DropInsertIf1Interface Canal 1ro INTEGER .1.3.6.1.4.1.866.20.1.10.15.10.1.1 |
fcfE1Ds1DropInsertIf2Interface Canal 2ro INTEGER .1.3.6.1.4.1.866.20.1.10.15.10.1.2 |
fcfE1Ds1DropInsertStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.10.15.10.1.3 |
fcfTokenRing OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.10.20 |
fcfTokenRingTable SEQUENCE OF FcfTokenRingEntry .1.3.6.1.4.1.866.20.1.10.20.1 |
fcfTokenRingEntryAn entry of fcfTokenRingTable. FcfTokenRingEntry .1.3.6.1.4.1.866.20.1.10.20.1.1 |
fcfTokenRingInterfaceIdIF idro INTEGER .1.3.6.1.4.1.866.20.1.10.20.1.1.1 |
fcfTokenRingSpeedVitesserw Enumeration .1.3.6.1.4.1.866.20.1.10.20.1.1.2 |
fcfTokenRingLinkCheckPeriodPeriode de surveillance jonction (msec)rw INTEGER .1.3.6.1.4.1.866.20.1.10.20.1.1.3 |
fcfTokenRingCheckPeriodCountConfirmation au bout de n periodesrw INTEGER .1.3.6.1.4.1.866.20.1.10.20.1.1.4 |
fcFrameRelaySwitch OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.15 |
fcFrSwitchingTableThis table defines the static part of ralaying
table used by the frame relay switch to establish
bi-directional connections between PVC
(Permanenent Virtual Circuit) end points. A PVC
end point is defined by the couple (interface
identifier, data link connection identifier). SEQUENCE OF FcFrSwitchingEntry .1.3.6.1.4.1.866.20.1.15.1 |
fcFrSwitchingEntryAn entry of fcFrSwitchingTable. FcFrSwitchingEntry .1.3.6.1.4.1.866.20.1.15.1.1 |
fcFrSwInputInterfaceIdThe value of this object is the interface
identifier for this PVC end point. The possible
values are : '0..35'. If it is unused, the value
of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.15.1.1.1 |
fcFrSwInputDlciThe value of this object is the Data Link
Connection Identifier for this PVC end point. The
possible values are : '0..1023. If it is unused,
the value of this parameter is '65535'. The PVC
end point connected to this PVC end point is
defined by fcFrSwOutputInterfaceId and
fcFrSwOutputDlci.ro INTEGER .1.3.6.1.4.1.866.20.1.15.1.1.2 |
fcFrSwStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.15.1.1.3 |
fcFrSwOutputInterfaceIdThe value of this object is the interface
identifier for the connected PVC end point. The
possible values are : '0..35'. If it is unused,
the value of this parameter is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.15.1.1.4 |
fcFrSwOutputDlciThe value of this object is the Data Link
Connection Identifier for the connected PVC end
point. The possible values are : '0..1023. If it
is unused, the value of this parameter is '65535'.rw INTEGER .1.3.6.1.4.1.866.20.1.15.1.1.5 |
fcFrSwPriorityThe value of this object indicates if this PVC end
point connection is foreground. The default value
is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.15.1.1.6 |
fcLogicalPorts OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20 |
fclLogicalPortTableThis table defines the parameters of a logical
port. A logical port permits the transmission
between systems with a specific stack of
protocols, over one physical port or more. SEQUENCE OF FclLogicalPortEntry .1.3.6.1.4.1.866.20.1.20.1 |
fclLogicalPortEntryAn entry of fclLogicalPortTable. FclLogicalPortEntry .1.3.6.1.4.1.866.20.1.20.1.1 |
fclLogPortIdThe value of this object identifies one and only
one logical port. The possible values are :
'0..131. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.1.1.1 |
fclLogPortStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.1.1.2 |
fclLogPortTypeThe value of this object identifies the stack of
protocols used by this logical port. The default
value is 'x25InterNode'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.1.1.3 |
fclEthernet OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.2 |
fclEthernetTableThis table defines the parameters of an ethernet
logical port. SEQUENCE OF FclEthernetEntry .1.3.6.1.4.1.866.20.1.20.2.1 |
fclEthernetEntryAn entry of fclEthernetTable. FclEthernetEntry .1.3.6.1.4.1.866.20.1.20.2.1.1 |
fclEthLogPortIdThe value of this object identifies one and only
one ethernet logical port. The possible values are
: '0..131'. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.2.1.1.1 |
fclEthInterfaceIdThe value of this object identifies the ethernet
interface used by this logical port. The possible
values are : '0..35'. If it is unused, the value
of this parameter is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.2.1.1.2 |
fclAsynchronousAccessLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.5 |
fclAsynLogPortTableThis table defines the general parameters of
asynchronous logical ports. SEQUENCE OF FclAsynLogPortEntry .1.3.6.1.4.1.866.20.1.20.5.1 |
fclAsynLogPortEntryAn entry of fclAsynLogPortTable. FclAsynLogPortEntry .1.3.6.1.4.1.866.20.1.20.5.1.1 |
fclAsynLpLogPortIdThe value of this object identifies one and only
one asynchronous logical port. The possible values
are : '0..131'. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.1.1.1 |
fclAsynLpInterfaceIdThe value of this object identifies the line
interface used by this asynchronous logical port.
The possible values are : '0..35'. If it is
unused, the value of this parameter is '255'. The
default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.1.1.2 |
fclAsynLpSubscriberNumberThe value of this object is the SB number added to
the DNICZO of the equipment to make the calling
address in a call sent from this logical port. The
value must contain 2 digits (digits 0..9). The
default value is 'FF'.rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.5.1.1.3 |
fclAsynLpConfigIdThe value of this object identifies the
asynchronous configuration used by this
asynchronous logical port. This asynchronous
configuration must be present in
fclAsynCfgConfigTable. The possible values are :
'0..199. If it is unused, the value of this
parameter is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.1.1.4 |
fclAsynLpTerminalTypeThe value of this object is the type of the
terminal connected to this asynchronous logical
port. The default value is 'pad'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.1.1.5 |
fclAsynPadLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.5.2 |
fclAsynPadLpTableThis table defines the specific parameters of an
asynchronous logical port when the terminal type
is 'pad'. SEQUENCE OF FclAsynPadLpEntry .1.3.6.1.4.1.866.20.1.20.5.2.1 |
fclAsynPadLpEntryAn entry of fclAsynPadLpTable. FclAsynPadLpEntry .1.3.6.1.4.1.866.20.1.20.5.2.1.1 |
fclAsynPadLpLogPortIdThe value of this object identifies one and only
one asynchronous logical port used to connect a
'pad' terminal. The possible values are :
'0..131'. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.2.1.1.1 |
fclAsynPadLpLinkThe value of this object indicates the type of
link used to connect the terminal to the
equipment. The default value is 'direct'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.2.1.1.2 |
fclAsynPadLpSpeedDetectionThe value of this object indicates if the
automatic speed detection is used. The default
value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.2.1.1.3 |
fclAsynPadLpEquipmentThe value of this object indicates the terminal in
facing. 'other' means 'all equipment except
Hewlett Packard'. The default value is 'other'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.2.1.1.4 |
fclAsynPadLpMnemonicTypeThe value of this object indicates the mnemonic
type. When set to 'pad' the mnemonic must begin
with a point, the call command is allowed, the X28
command is allowed, the call data and the password
are checked by the remote host. When set to
'vdxRemoteAuth' the mnemonic may optionaly begin
with a point, the call command is forbidden, the
X28 command is forbidden, the call data and the
password are checked by the remote host. When set
to 'vdxTeletel' the mnemonic may optionaly begin
with a point, the call command is allowed, the X28
command is forbidden, the call data and the
password are checked by the remote host. When set
to 'vdxLocalAuth' the mnemonic may optionaly begin
with a point, the call command is forbidden, the
X28 command is forbidden, the call data and the
password are checked by the pad. The default is
'pad'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.2.1.1.5 |
fclAsynPadLpNuiThe value of this object indicates the treatment
of the NUI (Network User Identifier). The
authorized values are 'none' (not checking),
'none-rc' (not checking, but reverse charging),
'optional-transmitOrRc' (The NUI is optional. If
it is present, the NUI is transmitted, else
reverse charging), 'optional-checkNuaOrRc' (The
NUI is optional, if the NUI is present then it is
checked else reverse charging), 'mandatory-check'
(The NUI is mandatory and checked),
'mandatory-check-nua' (The NUI is mandatory and
checked. After checking, the NUI is coded in NUA),
'mandatory-transmit' (The NUI is mandatory but not
checked, and it is transmitted),
'command-transmitOrRc' (NUI ON or NUI OFF is
manadatory before a communication). The default
value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.2.1.1.6 |
fclAsynPadLpCombinedFlowCtrlThe value of this object indicates wheter combined
flow control (by XON/XOFF and RTS/CTS) is enabled
or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.2.1.1.7 |
fclAsynPadHomePageTableThis table defines the home page of the PAD. The
home page is made of blocks. Each block contains a
message and its graphical attributes. SEQUENCE OF FclAsynPadHomePageEntry .1.3.6.1.4.1.866.20.1.20.5.2.10 |
fclAsynPadHomePageEntryAn entry of fclAsynPadHomePageTable. FclAsynPadHomePageEntry .1.3.6.1.4.1.866.20.1.20.5.2.10.1 |
fclAsynPadPageBlocIdThe value of this object is the block identifier.
The possible values are '0..99'. If it is unused,
the value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.2.10.1.1 |
fclAsynPadPageStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.2.10.1.2 |
fclAsynPadPageMessageThe value of this object is the message. This
message may contains from 0 to 12 characters. The
default value is the empty string.rw DisplayString .1.3.6.1.4.1.866.20.1.20.5.2.10.1.3 |
fclAsynPadPageAttributesThe value of this object defines the attributes
used to display the message. 11 bytes from 00 to
FF must be specified. The first byte contains the
number of following useful bytes. The trailing
bytes must be set to 'FF'. The equipment
configurator does not need this final completion.
The default value is 'empty' (first byte set to
'00').rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.5.2.10.1.4 |
fclAsynVdxLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.5.3 |
fclAsynVdxLpTableThis table defines the specific parameters of an
asynchronous logical port when the terminal type
is 'videotext'. SEQUENCE OF FclAsynVdxLpEntry .1.3.6.1.4.1.866.20.1.20.5.3.1 |
fclAsynVdxLpEntryAn entry of fclAsynVdxLpTable. FclAsynVdxLpEntry .1.3.6.1.4.1.866.20.1.20.5.3.1.1 |
fclAsynVdxLpLogPortIdThe value of this object identifies one and only
one asynchronous logical port used to connect a
'videotext' terminal. The possible values are :
'0..131'. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.3.1.1.1 |
fclAsynVdxLpLinkThe value of this object indicates the type of
link used to connect the terminal to the
equipment. The default value is 'direct'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.3.1.1.2 |
fclAsynVdxLpMnemonicTypeThe value of this object indicates the mnemonic
type. When set to 'pad' the mnemonic must begin
with a point, the call command is allowed, the X28
command is allowed, the call data and the password
are checked by the remote host. When set to
'vdxRemoteAuth' the mnemonic may optionaly begin
with a point, the call command is forbidden, the
X28 command is forbidden, the call data and the
password are checked by the remote host. When set
to 'vdxTeletel' the mnemonic may optionaly begin
with a point, the call command is allowed, the X28
command is forbidden, the call data and the
password are checked by the remote host. When set
to 'vdxLocalAuth' the mnemonic may optionaly begin
with a point, the call command is forbidden, the
X28 command is forbidden, the call data and the
password are checked by the pad. The default is
'pad'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.3.1.1.5 |
fclAsynVdxLpNuiThe value of this object indicates the treatment
of the NUI (Network User Identifier). The
authorized values are 'none' (not checking),
'none-rc' (not checking, but reverse charging),
'optional-transmitOrRc' (The NUI is optional. If
it is present, the NUI is transmitted, else
reverse charging), 'optional-checkNuaOrRc' (The
NUI is optional, if the NUI is present then it is
checked else reverse charging), 'mandatory-check'
(The NUI is mandatory and checked),
'mandatory-check-nua' (The NUI is mandatory and
checked. After checking, the NUI is coded in NUA),
'mandatory-transmit' (The NUI is mandatory but not
checked, and it is transmitted),
'command-transmitOrRc' (NUI ON or NUI OFF is
manadatory before a communication). The default
value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.3.1.1.6 |
fclAsynVdxLpParityBitParite X25rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.3.1.1.10 |
fclAsynVdxLpPceSubThresholdSeuil de Comptage SUB (PCE)rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.3.1.1.11 |
fclAsynVdxLpPceNackTimerTempo d'emission NACK (PCE) msecrw INTEGER .1.3.6.1.4.1.866.20.1.20.5.3.1.1.12 |
fclAsynVdxHomePageTableThis table defines the home page of the VIDEOTEXT
PAD. The home page is made of blocks. Each block
contains a message and its graphical attributes. SEQUENCE OF FclAsynVdxHomePageEntry .1.3.6.1.4.1.866.20.1.20.5.3.10 |
fclAsynVdxHomePageEntryAn entry of fclAsynVdxHomePageTable. FclAsynVdxHomePageEntry .1.3.6.1.4.1.866.20.1.20.5.3.10.1 |
fclAsynVdxPageBlocIdThe value of this object is the block identifier.
The possible values are '0..99'. If it is unused,
the value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.3.10.1.1 |
fclAsynVdxPageStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.3.10.1.2 |
fclAsynVdxPageMessageThe value of this object is the message. This
message may contains from 0 to 12 characters. The
default value is the empty string.rw DisplayString .1.3.6.1.4.1.866.20.1.20.5.3.10.1.3 |
fclAsynVdxPageAttributesThe value of this object defines the attributes
used to display the message. 11 bytes from 00 to
FF must be specified. The first byte contains the
number of following useful bytes. The trailing
bytes must be set to 'FF'. The equipment
configurator does not need this final completion.
The values are defined by the TELETEL standard.
The default value is 'empty' (first byte set to
'00').rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.5.3.10.1.4 |
fclAsynLowSpeedCpLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.5.4 |
fclAsynLscpLpTableThis table defines the specific parameters of an
asynchronous logical port when the terminal type
is 'lowSpeedComputerPort' or
'lowSpeedComputerPortWithAutoCalls'. SEQUENCE OF FclAsynLscpLpEntry .1.3.6.1.4.1.866.20.1.20.5.4.1 |
fclAsynLscpLpEntryAn entry of fclAsynLscpLpTable. FclAsynLscpLpEntry .1.3.6.1.4.1.866.20.1.20.5.4.1.1 |
fclAsynLscpLpLogPortIdThe value of this object identifies one and only
one asynchronous logical port used to connect a
'lowSpeedComputerPort' terminal. The possible
values are : '0..131'. If it is unused, the value
of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.4.1.1.1 |
fclAsynLscpLpLinkThe value of this object indicates the type of
link used to connect the terminal to the
equipment. The default value is 'direct'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.4.1.1.2 |
fclAsynLscpLpEquipmentThe value of this object indicates the terminal in
facing. 'other' means 'all equipment except
Hewlett Packard'. The default value is 'other'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.4.1.1.4 |
fclAsynMultiStandardPadLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.5.5 |
fclAsynMultiLpTableThis table defines the specific parameters of an
asynchronous logical port when the terminal type
is 'multiStandardPad'. SEQUENCE OF FclAsynMultiLpEntry .1.3.6.1.4.1.866.20.1.20.5.5.1 |
fclAsynMultiLpEntryAn entry of fclAsynMultiLpTable. FclAsynMultiLpEntry .1.3.6.1.4.1.866.20.1.20.5.5.1.1 |
fclAsynMultiLpLogPortIdThe value of this object identifies one and only
one asynchronous logical port used to connect a
'multiStandardPad' terminal. The possible values
are : '0..131'. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.5.1.1.1 |
fclAsynMultiLpAuthStep1The value of this object defines the treatment
used in the first step of authentication.
'undefined' means 'no treatment. The default value
is 'undefined'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.5.1.1.10 |
fclAsynMultiLpAuthStep2The value of this object defines the treatment
used in the second step of authentication.
'undefined' means 'no treatment. The default value
is 'undefined'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.5.1.1.11 |
fclAsynMultiLpAuthStep3The value of this object defines the treatment
used in the third step of authentication.
'undefined' means 'no treatment. The default value
is 'undefined'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.5.1.1.12 |
fclAsynMultiLpAuthStep4The value of this object defines the treatment
used in the fourth step of authentication.
'undefined' means 'no treatment. The default value
is 'undefined'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.5.1.1.13 |
fclAsynX28PlusLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.5.6 |
fclAsynX28PlusLpTableThis table defines the specific parameters of an
asynchronous logical port when the terminal type
is 'x28plus'. SEQUENCE OF FclAsynX28PlusLpEntry .1.3.6.1.4.1.866.20.1.20.5.6.1 |
fclAsynX28PlusLpEntryAn entry of fclAsynX28PlusLpTable. FclAsynX28PlusLpEntry .1.3.6.1.4.1.866.20.1.20.5.6.1.1 |
fclAsynX28PlusLpLogPortIdThe value of this object identifies one and only
one asynchronous logical port used to connect a
'x28plus' terminal. The possible values are :
'0..131'. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.1.1.1 |
fclAsynX28PlusLpLinkThe value of this object indicates the type of
link used to connect the terminal to the
equipment. The default value is 'direct'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.1.1.2 |
fclAsynX28PlusLpSpeedDetectionThe value of this object indicates if the
automatic speed detection is used. The default
value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.1.1.3 |
fclAsynX28PlusLpEquipmentThe value of this object indicates the terminal in
facing. 'other' means 'all equipment except
Hewlett Packard'. The default value is 'other'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.1.1.4 |
fclAsynX28PlusLpMnemonicTypeThe value of this object indicates the mnemonic
type. When set to 'pad' the mnemonic must begin
with a point, the call command is allowed, the X28
command is allowed, the call data and the password
are checked by the remote host. When set to
'vdxRemoteAuth' the mnemonic may optionaly begin
with a point, the call command is forbidden, the
X28 command is forbidden, the call data and the
password are checked by the remote host. When set
to 'vdxTeletel' the mnemonic may optionaly begin
with a point, the call command is allowed, the X28
command is forbidden, the call data and the
password are checked by the remote host. When set
to 'vdxLocalAuth' the mnemonic may optionaly begin
with a point, the call command is forbidden, the
X28 command is forbidden, the call data and the
password are checked by the pad. The default is
'pad'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.1.1.5 |
fclAsynX28PlusLpFullDuplexThe value of this object indicates whether the
line is in full duplex (with echo) or half duplex
(without echo). The echo of a transfer mode
character is also defined by the X3 parameter
number 2. The authorized values are 'off' (line in
half duplex), 'on' (line in full duplex). The
default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.1.1.10 |
fclAsynX28PlusLpIdleTimerSelectionThe value of this object indicates whether the
timers fclAsynCfgX3P04IdleTimerDelay and
fclAsynX28PlusLpIdleTimerDelay are enabled or not.
The data are sent upon when one of these two
timers expires. The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.1.1.11 |
fclAsynX28PlusLpIdleTimerDelayThe value of this object defines the data
forwarding time-out in milliseconds. This timer is
started at reception time of the first character.
When this time-out expires, the PAD sends the
received characters to the network. The time-out
is restarted upon reception of the first character
to follow. The authorized values are '0..12750'
milliseconds. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.1.1.12 |
fclAsynX28PlusLpX3ModeThe value of this object indicates the X3 mode.
The authorized value are 'transparent' (X3
parameters 1, 13 and 15 are interpreted : case of
escape, no LF insertion after CR) or
'networkVirtualTerminal' (X3 parameters 1, 13 and
15 are not inhibited). The default value is
'networkVirtualTerminal'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.1.1.13 |
fclAsynX28PlusLpEscapeDigitDigit d'echappementrw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.1.1.14 |
fclAsynX28PlusLpConIdTelenetConfig ID TELENETrw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.1.1.15 |
fclAsynX28PlusLpConIdRemoteConfig ID Remote X3 et TELENETrw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.1.1.16 |
fclAsynX28PlusLpRemPrSentOnCallsEnvoi du profil distantrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.1.1.17 |
fclAsynX28PlusLpEasyMnemoFacilite mnemoniquerw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.1.1.20 |
fclAsynX28PlusLpMonSignalCTSGestion du signal sortant106CTS (DCE)/108DTR(DTE)rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.1.1.21 |
fclAsynX28PlusLpMonSignalDSRGestion du signal sortant 107DSR (DCE)/111DRS(DTE)rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.1.1.22 |
fclAsynX28PlusLpMonSignalDCDGestion du signal sortant 109DCD(DCE)/105RTS(DTE)rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.1.1.23 |
fclAsynX28PlusGeneralParameters OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.5.6.2 |
fclAsynX28PlusGenParDNICDNIC pour adresse abregeerw OCTET STRING .1.3.6.1.4.1.866.20.1.20.5.6.2.1 |
fclAsynX28PlusConfTELENETTable SEQUENCE OF FclAsynX28PlusConfTELENETEntry .1.3.6.1.4.1.866.20.1.20.5.6.3 |
fclAsynX28PlusConfTELENETEntryAn entry of fclAsynX28PlusConfTELENETTable. FclAsynX28PlusConfTELENETEntry .1.3.6.1.4.1.866.20.1.20.5.6.3.1 |
fclAsynX28PlusCfgTELENETConfigIdConfig Idro INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.3.1.1 |
fclAsynX28PlusCfgTELENETDescriptionDescriptionrw DisplayString .1.3.6.1.4.1.866.20.1.20.5.6.3.1.2 |
fclAsynX28PlusParTELENETTable SEQUENCE OF FclAsynX28PlusParTELENETEntry .1.3.6.1.4.1.866.20.1.20.5.6.4 |
fclAsynX28PlusParTELENETEntryAn entry of fclAsynX28PlusParTELENETTable. FclAsynX28PlusParTELENETEntry .1.3.6.1.4.1.866.20.1.20.5.6.4.1 |
fclAsynX28PlusParTelConfigIdConfig Idro INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.4.1.1 |
fclAsynX28PlusParTelLpFullDuplexLigne FullDuplexrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.4.1.10 |
fclAsynX28PlusParTelLpIdleTimerSelectionEnvoi sur temporw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.4.1.11 |
fclAsynX28PlusParTelLpIdleTimerDelayTempo d'envoi de donneesrw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.4.1.12 |
fclAsynX28PlusParTelLpX3ModeTerminal Virtuelrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.4.1.13 |
fclAsynX28PlusConfRemoteTable SEQUENCE OF FclAsynX28PlusConfRemoteEntry .1.3.6.1.4.1.866.20.1.20.5.6.5 |
fclAsynX28PlusConfRemoteEntryAn entry of fclAsynX28PlusConfRemoteTable. FclAsynX28PlusConfRemoteEntry .1.3.6.1.4.1.866.20.1.20.5.6.5.1 |
fclAsynX28PlusRemoteConfigIdConfig Idro INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.5.1.1 |
fclAsynX28PlusRemoteCfgDescriptionDescriptionrw DisplayString .1.3.6.1.4.1.866.20.1.20.5.6.5.1.2 |
fclAsynX28PlusRemoteCfgX3Part1Table SEQUENCE OF FclAsynX28PlusRemoteCfgX3Part1Entry .1.3.6.1.4.1.866.20.1.20.5.6.6 |
fclAsynX28PlusRemoteCfgX3Part1EntryAn entry of fclAsynX28PlusRemoteCfgX3Part1Table. FclAsynX28PlusRemoteCfgX3Part1Entry .1.3.6.1.4.1.866.20.1.20.5.6.6.1 |
fclAsynX28PlusRemConfigIdConfig Idro INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.6.1.1 |
fclAsynX28PlusRemCfgX3P01EscapeCharCaractere d'echappementrw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.6.1.11 |
fclAsynX28PlusRemCfgX3P02EchoEchorw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.6.1.12 |
fclAsynX28PlusRemCfgX3P03ForwardingCharCaractere d'envoi des donneesrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.6.1.13 |
fclAsynX28PlusRemCfgX3P04IdleTimerDelayDelai d'envoi (en 1/20eme de seconde)rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.6.1.14 |
fclAsynX28PlusRemCfgX3P05OutputFlowCtrlControl de flux PAD vers Terminalrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.6.1.15 |
fclAsynX28PlusRemCfgX3P06ServiceSignalsTransmission des indications par le PADrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.6.1.16 |
fclAsynX28PlusRemCfgX3P07BreakHandlingReaction sur Breakrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.6.1.17 |
fclAsynX28PlusRemCfgX3P08OutputDiscardArret de la remise des donneesrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.6.1.18 |
fclAsynX28PlusRemCfgX3P09CrPaddingBourrage apres RCrw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.6.1.19 |
fclAsynX28PlusRemCfgX3P10LineFoldingPliage de lignerw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.6.1.20 |
fclAsynX28PlusRemCfgX3P11BinarySpeedDebit binaire (en bit/s)rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.6.1.21 |
fclAsynX28PlusRemoteCfgX3Part2Table SEQUENCE OF FclAsynX28PlusRemoteCfgX3Part2Entry .1.3.6.1.4.1.866.20.1.20.5.6.7 |
fclAsynX28PlusRemoteCfgX3Part2EntryAn entry of fclAsynX28PlusRemoteCfgX3Part2Table. FclAsynX28PlusRemoteCfgX3Part2Entry .1.3.6.1.4.1.866.20.1.20.5.6.7.1 |
fclAsynX28PlusRemCfgX3Part2ConfigIdConfig Idro INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.7.1.1 |
fclAsynX28PlusRemCfgX3P12InputFlowCtrlControl de flux Terminal vers PADrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.7.1.22 |
fclAsynX28PlusRemCfgX3P13LfInsertionInsertion de LF apres RCrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.7.1.23 |
fclAsynX28PlusRemCfgX3P14LfPaddingBourrage apres LFrw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.7.1.24 |
fclAsynX28PlusRemCfgX3P15EditingEditionrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.7.1.25 |
fclAsynX28PlusRemCfgX3P16CharDeleteCaractere d'effacement d'un caractererw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.7.1.26 |
fclAsynX28PlusRemCfgX3P17LineDeleteCaractere d'effacement d'une lignerw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.7.1.27 |
fclAsynX28PlusRemCfgX3P18LineDisplayCaractere d'affichage d'une lignerw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.7.1.28 |
fclAsynX28PlusRemCfgX3P19EditingSignalIndication d'editionrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.7.1.29 |
fclAsynX28PlusRemCfgX3P20EchoMaskMasque d'echorw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.7.1.30 |
fclAsynX28PlusRemCfgX3P21ParityTraitement de la pariterw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.7.1.31 |
fclAsynX28PlusRemCfgX3P22PageWaitAttente en fin de pagerw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.7.1.32 |
fclAsynX28PlusRemoteTELENETTable SEQUENCE OF FclAsynX28PlusRemoteTELENETEntry .1.3.6.1.4.1.866.20.1.20.5.6.8 |
fclAsynX28PlusRemoteTELENETEntryAn entry of fclAsynX28PlusRemoteTELENETTable. FclAsynX28PlusRemoteTELENETEntry .1.3.6.1.4.1.866.20.1.20.5.6.8.1 |
fclAsynX28PlusRemCfgTELENETConfigIdConfig Idro INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.8.1.1 |
fclAsynX28PlusRemLpFullDuplexLigne FullDuplexrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.8.1.10 |
fclAsynX28PlusRemLpIdleTimerSelectionEnvoi sur temporw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.8.1.11 |
fclAsynX28PlusRemLpIdleTimerDelayTempo d'envoi de donneesrw INTEGER .1.3.6.1.4.1.866.20.1.20.5.6.8.1.12 |
fclAsynX28PlusRemLpX3ModeTerminal Virtuelrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.6.8.1.13 |
fclAsynGeneralParameters OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.5.7 |
fclAsynGenParLanguageTypeType de languerw Enumeration .1.3.6.1.4.1.866.20.1.20.5.7.1 |
fclAsynConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.5.10 |
fclAsynCfgConfigTableThis table contains the asynchronous
configurations used in the asynchronous logical
port table. SEQUENCE OF FclAsynCfgConfigEntry .1.3.6.1.4.1.866.20.1.20.5.10.1 |
fclAsynCfgConfigEntryAn entry of fclAsynCfgConfigTable. FclAsynCfgConfigEntry .1.3.6.1.4.1.866.20.1.20.5.10.1.1 |
fclAsynCfgConfigIdThe value of this object identifies one and only
one asynchronous configuration. This configuration
may be referenced by fclAsynLpConfigId in the
asynchronous logical port table.
The possible values are : '0..199. If it is
unused, the value of this parameter is '255'.
The configuration parameters are described in :
fclAsynCfgX3Part1Table : X3 part 1,
fclAsynCfgX3Part2Table : X3 part 2,
fclAsynCfgConnLinkTable : data link level
(connection part),
fclAsynCfgConnFacilityTable : facility level
(connection part),
fclAsynCfgConnServiceTable : service level
(connection part).
When creating a new configuration each parameter
takes its default value. Setting a profile allows
the user to fill all the parameters with values
pre-defined in this profile but each one may also
be individually modified.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.1.1.1 |
fclAsynCfgStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.1.1.2 |
fclAsynCfgDescriptionThe value of this object stores a text description
of the configuration elaborated by the user. This
description may contains from 0 to 32 characters.
The default value is 'TTY'.rw DisplayString .1.3.6.1.4.1.866.20.1.20.5.10.1.1.3 |
fclAsynCfgX3ProfileIdThe value of this object is the profile number
used to automatically valorize all the X3
parameters in an entry of the two tables which
composes the X3 part of asynchronous
configurations (see fclAsynCfgConfigId).
The possible values are :
00 Plain terminal,
01 Transparent terminal or LSCP,
02 LSCP,
03 Terminal communicating with LSCP,
04 Same as profile 03 with send time-out and
padding,
05 Terminal with control by PAD,
06 Same es profile 00 with special break and
break,
08 Same as profile 05 with echo,
09 Telex terminals,
10 Same as profile 05 without control by PAD,
11 Same as profile 02 without control by PAD,
12 Same as profile 00 without echo,
13 Block mode terminal controlled by PAD
without send time-out,
14 Same as profile 13 with authorized DLE,
15 Same as profile 13 without control,
16 Host HEWLETT PACKARD,
17 Terminal HEWLETT PACKARD,
20 Same as profile 00 with control and
teleprinter adapted editing,
21 Same as profile 20 with display-terminal
adapted editing,
22 Same as profile 13 with control bye DTE-C,
23 Same as profile 21 for data base
application,
30 VIDEOTEX terminal,
32 Multi-standard VIDEOTEX terminal,
80 User defined profile : the values in this
profile are defined by the user (they may be
specified in groups
fclAsynCfgX3UserProfilePart1 and
fclAsynCfgX3UserProfilePart2,
89 Special terminal,
90 Plain terminal without padding or send
time-out,
91 Plain transparent LSCP.
If it is unused, the value of this parameter is
'255'.
The default value is '89' (meaning that default
values of X3 parameters are those pre-defined in
profile number 89).rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.1.1.4 |
fclAsynCfgX3ModifCountThe value of this object indicates how many X3
parameters have not the value defined in the
profile specified by fclAsynCfgX3ProfileId (i.e
how many individual modifications).ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.1.1.5 |
fclAsynCfgConnectionProfileIdThe value of this object is the profile number
used to automatically valorize all the connection
parameters in an entry of the three tables which
composes the connection part of asynchronous
configurations (see fclAsynCfgConfigId).
The possible values are :
07 Terminal with automatic baud rate detect,
08 Direct connected terminal,
09 Terminal connection PSTN,
10 Terminal connected by dedicated line,
11 LSCP terminal - direct connection,
12 LSCP terminal - dedicated line connection,
13 LSCP-A terminal - direct connection,
14 LSCP-A terminal - dedicated line connection,
15 Minitel terminal - direct connection,
16 Minitel terminal - PSTN connection,
34 TTY terminal - PSTN connection (V.25 bis),
35 Minitel terminal - PSTN connection (V.25
bis),
36 Minitel terminal - PSTN connection (modem
turnaround),
37 Multistandard videotex terminal,
38 Kiosk micro computer,
If it is unused, the value of this parameter is
'255'.
The default value is '8' (meaning that default
values of connection parameters are those
pre-defined in profile number 08).rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.1.1.6 |
fclAsynCfgConnModifCountThe value of this object indicates how many
connection parameters have not the value defined
in the profile specified by
fclAsynCfgConnectionProfileId (i.e how many
individual modifications).ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.1.1.7 |
fclAsynCfgX3Part1TableThis table contains the X3 parameters (part 1) of
asynchronous configurations. SEQUENCE OF FclAsynCfgX3Part1Entry .1.3.6.1.4.1.866.20.1.20.5.10.11 |
fclAsynCfgX3Part1EntryAn entry of fclAsynCfgX3Part1Table. FclAsynCfgX3Part1Entry .1.3.6.1.4.1.866.20.1.20.5.10.11.1 |
fclAsynCfgX3Part1ConfigIdThe value of this object identifies one and only
one asynchronous configuration. The possible
values are : '0..199. If it is unused, the value
of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.11.1.1 |
fclAsynCfgX3Part1ProfileIdThe value of this object is the X3 profile number
used to create this configuration.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.11.1.2 |
fclAsynCfgX3P01EscapeCharThe value of this object is the character to
escape from the data transfer state and to recall
the PAD. The authorized values are '0..126'. The
value '0' indicates no escape. The value '1' is
the DLE character. The values '2..126' are the
ASCII code of the character. The default value is
'1'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.11.1.11 |
fclAsynCfgX3P02EchoThe value of this object indicates whether the
echo is local not. The authorized values are 'off'
(echoing by the terminal), 'on' (echoing by the
equipment). The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.11.1.12 |
fclAsynCfgX3P03ForwardingCharThe value of this object is the data forwarding
character(s). The authorized values are 'none' (no
character), 'CR' (Carriage Return), 'CR ESC BEL
ENQ ACK' (Carriage Return, Escape, Bell, Enquire,
Acknowledge), 'CR EOT ETX' (Carriage Return, End
Of Text, End Of Transmission), 'HT LF VT FF'
(Horizontal Tabulation, Line Feed, Vertical
Tabulation, Form Feed), 'all Ctrl Chars' (all
control characters), 'all Chars' (all characters),
'all Ctrl Chars vdxFunctionKeys' (all control
characters and videotext function keys),
'encapsCharacSLIP', 'encapsCharacPPP'. The default
value is 'all Ctrl Chars'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.11.1.13 |
fclAsynCfgX3P04IdleTimerDelayThe value of this object is the idle timer delay
in twentieths of a second. The authorized values
are '0..250'. The value '0' will indicate that no
data forwarding on time-out is required. The
default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.11.1.14 |
fclAsynCfgX3P05OutputFlowCtrlThe value of this object indicates the flow
control type from the equipment to the terminal.
The authorized values are 'none' (no use of XON
and XOFF), 'xonXoffInTransfer' (use of XON and
XOFF in data transfer), 'xonXoff' (use of XON and
XOFF in data transfer and command),
'rtsCtsInTransfer' (use of CTS and RTS signals in
transfer). The default value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.11.1.15 |
fclAsynCfgX3P06ServiceSignalsThe value of this object is the control of service
signals and command signals sent by the equipment.
The authorized values are 'none' (no service
signals are transmitted to the start-stop mode
DTE), 'servSignal-stdFormat' (service signals
other than the prompt PAD service signal are
transmitted in the standard format),
'servSignalAndPrompt-stdFormat' (service signals
and the prompt service signal are transmitted in
the standard format), 'servSignal-explicitFormat'
(service signals other than the prompt service
signal are transmitted in the explicit format),
'servSignalAndPrompt-explicitFormat' (service
signals and the prompt service signal are
transmitted in the explicit format). The default
value is 'servSignalAndPrompt-explicitFormat'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.11.1.16 |
fclAsynCfgX3P07BreakHandlingThe value of this object is the selection of
equipment operations on receipt of break signal
from the start-stop mode DTE. The authorized
values are 'forwardingChar' (no particular
operation), 'interrupt' (send to packet mode DTE
or other PAD an interrupt packet), 'reset'
(reset), 'interrupt-breakIndication' (send to
packet mode DTE or other PAD an interrupt packet
and an indication of break PAD message),
'escapeFromTransfer' (escape from data transfer
state), 'interrupt-breakIndication-discardOutput'
(send to packet mode DTE or other PAD an interrupt
packet and an indication of break PAD message, and
discard output to start-stop mode DTE). The
default value is 'reset'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.11.1.17 |
fclAsynCfgX3P08OutputDiscardThe value of this object indicates whether data
are sent to the terminal or not. The authorized
values are 'off' (normal data delivery to the
start-stop mode DTE), 'on' (discard output to
start-stop mode DTE). The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.11.1.18 |
fclAsynCfgX3P09CrPaddingThe value of this object indicates the padding
after carriage return. The authorized values are
'0..250'. A value between '0' and '250' will
indicate the number of padding characters to be
generated by the equipment after a carriage return
character is transmitted to the start-stop mode
DTE. When the value of this parameter is '0',
there will be no padding except that PAD service
signals will contain a number of padding
characters according to the data rate of the
start-stop mode DTE. The default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.11.1.19 |
fclAsynCfgX3P10LineFoldingThe value of this object indicates the line
folding. The authorized values are '0..250'. The
value '0' indicates no line folding. A value
between '1' and '250' will indicate the number of
graphic characters per line that will be
transmitted by the equipment without inserting
appropriate format effectors. The default value is
'0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.11.1.20 |
fclAsynCfgX3P11BinarySpeedThe value of this object is the binary speed in
bits per second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.11.1.21 |
fclAsynCfgX3Part2TableThis table contains the X3 parameters (part 2) of
asynchronous configurations. SEQUENCE OF FclAsynCfgX3Part2Entry .1.3.6.1.4.1.866.20.1.20.5.10.12 |
fclAsynCfgX3Part2EntryAn entry of fclAsynCfgX3Part2Table. FclAsynCfgX3Part2Entry .1.3.6.1.4.1.866.20.1.20.5.10.12.1 |
fclAsynCfgX3Part2ConfigIdThe value of this object identifies one and only
one asynchronous configuration. The possible
values are : '0..199. If it is unused, the value
of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.12.1.1 |
fclAsynCfgX3Part2ProfileIdThe value of this object is the X3 profile number
used to create this configuration.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.12.1.2 |
fclAsynCfgX3P12InputFlowCtrlThe value of this object indicates the flow
control type from the start-stop mode DTE to the
equipment. The authorized values are 'none' (no
use of XON and XOFF for flow control), 'xonXoff'
(use of XON and XOFF for flow control), 'rtsCts'
(use of RTS and CTS for flow control). The default
value is 'xonXoff'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.12.1.22 |
fclAsynCfgX3P13LfInsertionThe value of this object indicates where there is
the Line Feed insertion after Carriage Return. The
authorized values are 'none' (no Line Feed
insertion), 'outCr' (insert Line Feed after each
Carriage Return in the data stream to the
start-stop mode DTE), 'inCr' (insert Line Feed
after each Carriage Return in the data stream from
the start-stop mode DTE), 'outCr-inCr' (insert
Line Feed after each Carriage Return in the data
stream from and to the start-stop mode DTE),
'outCrEcho' (insert Line Feed after each Carriage
Return in the echo stream to the start-stop mode
DTE), 'outCr-outCrEcho' ('outCr' + 'outCrEcho'),
'inCr-outCrEcho' ('inCr' + 'outCrEcho'),
'outCr-inCr-outCrEcho' ('outCr-inCr' +
'outCrEcho'). The default value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.12.1.23 |
fclAsynCfgX3P14LfPaddingThe value of this object is the Line Feed padding.
The authorized values are '0..250'. A value
between '0' and '250' will indicate the number of
padding characters to be generated by the
equipement after a Line Feed character transmitted
to the start-stop mode DTE during the data
transfer state. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.12.1.24 |
fclAsynCfgX3P15EditingThe value of this object indicates the editing
mode. The authorized values are 'off', 'on'. The
default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.12.1.25 |
fclAsynCfgX3P16CharDeleteThe value of this object is the 'character delete'
character. The authorized values are '0..128'. The
default value is '127'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.12.1.26 |
fclAsynCfgX3P17LineDeleteThe value of this object is the 'line delete'
character. The authorized values are '0..128'. The
default value is '24'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.12.1.27 |
fclAsynCfgX3P18LineDisplayThe value of this object is the 'line display'
character. The authorized values are '0..127'. The
default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.12.1.28 |
fclAsynCfgX3P19EditingSignalThe value of this object defines the editing PAD
service signals. The authorized values are 'none'
(no editing PAD service signals),
'printingTerminal' (editing PAD service signals
for printing terminals), 'displayTerminal'
(editing PAD service signals for display
terminals). The default value is 'displayTerminal'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.12.1.29 |
fclAsynCfgX3P20EchoMaskThe value of this object is the echo mask. The
authorized values are '0..255'. The default value
is '64'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.12.1.30 |
fclAsynCfgX3P21ParityThe value of this object indicates the parity
treatment. The authorized values are 'none' (no
parity checking or generation), 'check' (parity
checking), 'generate' (parity generation),
'check-generate' (parity checking and generation).
The default value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.12.1.31 |
fclAsynCfgX3P22PageWaitThe value of this object defines the page wait.
The authorized values are '0..127'. The value '0'
indicates that the page wait is disabled. A value
between '1' and '127' is the number of Line Feed
characters sent by the equipment to the start-stop
mode DTE. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.12.1.32 |
fclAsynCfgX3UserProfilePart1 OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.5.10.15 |
fclAsynCfgX3UserProfileIdThe value of this object is 80 the number of the
user profile. This profile may be used, as any
other X3 profile, to make a new asynchronous
configuration in fclAsynCfgConfigTable.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.15.3 |
fclAsynCfgX3UserProfileDescThe value of this object stores a text description
of the user profile elaborated by the user. This
description may contains from 0 to 32 characters.
The default value is 'User profile'.rw DisplayString .1.3.6.1.4.1.866.20.1.20.5.10.15.4 |
fclAsynCfgX3UserP01EscapeCharThe value of this object is the character to
escape from the data transfer state and to recall
the PAD. The authorized values are '0..126'. The
value '0' indicates no escape. The value '1' is
the DLE character. The values '2..126' are the
ASCII code of the character. The default value is
'1'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.15.11 |
fclAsynCfgX3UserP02EchoThe value of this object indicates whether the
echo is local not. The authorized values are 'off'
(echoing by the terminal), 'on' (echoing by the
equipment). The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.15.12 |
fclAsynCfgX3UserP03ForwardingCharThe value of this object is the data forwarding
character(s). The authorized values are 'none' (no
character), 'CR' (Carriage Return), 'CR ESC BEL
ENQ ACK' (Carriage Return, Escape, Bell, Enquire,
Acknowledge), 'CR EOT ETX' (Carriage Return, End
Of Text, End Of Transmission), 'HT LF VT FF'
(Horizontal Tabulation, Line Feed, Vertical
Tabulation, Form Feed), 'all Ctrl Chars' (all
control characters), 'all Chars' (all characters),
'all Ctrl Chars vdxFunctionKeys' (all control
characters and videotext function keys)
'encapsCharacSLIP', 'encapsCharacPPP'. The default
value is 'all Ctrl Chars'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.15.13 |
fclAsynCfgX3UserP04IdleTimerDelayThe value of this object is the idle timer delay
in twentieths of a second. The authorized values
are '0..250'. The value '0' will indicate that no
data forwarding on time-out is required. The
default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.15.14 |
fclAsynCfgX3UserP05OutputFlowCtrlThe value of this object indicates the flow
control type from the equipment to the terminal.
The authorized values are 'none' (no use of XON
and XOFF), 'xonXoffInTransfer' (use of XON and
XOFF in data transfer), 'xonXoff' (use of XON and
XOFF in data transfer and command),
'rtsCtsInTransfer' (use of CTS and RTS signals in
transfer). The default value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.15.15 |
fclAsynCfgX3UserP06ServiceSignalsThe value of this object is the control of service
signals and command signals sent by the equipment.
The authorized values are 'none' (no service
signals are transmitted to the start-stop mode
DTE), 'servSignal-stdFormat' (service signals
other than the prompt PAD service signal are
transmitted in the standard format),
'servSignalAndPrompt-stdFormat' (service signals
and the prompt service signal are transmitted in
the standard format), 'servSignal-explicitFormat'
(service signals other than the prompt service
signal are transmitted in the explicit format),
'servSignalAndPrompt-explicitFormat' (service
signals and the prompt service signal are
transmitted in the explicit format). The default
value is 'servSignalAndPrompt-explicitFormat'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.15.16 |
fclAsynCfgX3UserP07BreakHandlingThe value of this object is the selection of
equipment operations on receipt of break signal
from the start-stop mode DTE. The authorized
values are 'forwardingChar' (no particular
operation), 'interrupt' (send to packet mode DTE
or other PAD an interrupt packet), 'reset'
(reset), 'interrupt-breakIndication' (send to
packet mode DTE or other PAD an interrupt packet
and an indication of break PAD message),
'escapeFromTransfer' (escape from data transfer
state), 'interrupt-breakIndication-discardOutput'
(send to packet mode DTE or other PAD an interrupt
packet and an indication of break PAD message, and
discard output to start-stop mode DTE). The
default value is 'reset'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.15.17 |
fclAsynCfgX3UserP08OutputDiscardThe value of this object indicates whether data
are sent to the terminal or not. The authorized
values are 'off' (normal data delivery to the
start-stop mode DTE), 'on' (discard output to
start-stop mode DTE). The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.15.18 |
fclAsynCfgX3UserP09CrPaddingThe value of this object indicates the padding
after carriage return. The authorized values are
'0..250'. A value between '0' and '250' will
indicate the number of padding characters to be
generated by the equipment after a carriage return
character is transmitted to the start-stop mode
DTE. When the value of this parameter is '0',
there will be no padding except that PAD service
signals will contain a number of padding
characters according to the data rate of the
start-stop mode DTE. The default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.15.19 |
fclAsynCfgX3UserP10LineFoldingThe value of this object indicates the line
folding. The authorized values are '0..250'. The
value '0' indicates no line folding. A value
between '1' and '250' will indicate the number of
graphic characters per line that will be
transmitted by the equipment without inserting
appropriate format effectors. The default value is
'0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.15.20 |
fclAsynCfgX3UserP11BinarySpeedThe value of this object is the binary speed in
bits per second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.15.21 |
fclAsynCfgX3UserProfilePart2 OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.5.10.16 |
fclAsynCfgX3UserP12InputFlowCtrlThe value of this object indicates the flow
control type from the start-stop mode DTE to the
equipment. The authorized values are 'none' (no
use of XON and XOFF for flow control), 'xonXoff'
(use of XON and XOFF for flow control), 'rtsCts'
(use of RTS and CTS for flow control). The default
value is 'xonXoff'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.16.22 |
fclAsynCfgX3UserP13LfInsertionThe value of this object indicates where there is
the Line Feed insertion after Carriage Return. The
authorized values are 'none' (no Line Feed
insertion), 'outCr' (insert Line Feed after each
Carriage Return in the data stream to the
start-stop mode DTE), 'inCr' (insert Line Feed
after each Carriage Return in the data stream from
the start-stop mode DTE), 'outCr-inCr' (insert
Line Feed after each Carriage Return in the data
stream from and to the start-stop mode DTE),
'outCrEcho' (insert Line Feed after each Carriage
Return in the echo stream to the start-stop mode
DTE), 'outCr-outCrEcho' ('outCr' + 'outCrEcho'),
'inCr-outCrEcho' ('inCr' + 'outCrEcho'),
'outCr-inCr-outCrEcho' ('outCr-inCr' +
'outCrEcho'). The default value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.16.23 |
fclAsynCfgX3UserP14LfPaddingThe value of this object is the Line Feed padding.
The authorized values are '0..250'. A value
between '0' and '250' will indicate the number of
padding characters to be generated by the
equipement after a Line Feed character transmitted
to the start-stop mode DTE during the data
transfer state. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.16.24 |
fclAsynCfgX3UserP15EditingThe value of this object indicates the editing
mode. The authorized values are 'off', 'on'. The
default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.16.25 |
fclAsynCfgX3UserP16CharDeleteThe value of this object is the 'character delete'
character. The authorized values are '0..128'. The
default value is '127'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.16.26 |
fclAsynCfgX3UserP17LineDeleteThe value of this object is the 'line delete'
character. The authorized values are '0..128'. The
default value is '24'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.16.27 |
fclAsynCfgX3UserP18LineDisplayThe value of this object is the 'line display'
character. The authorized values are '0..127'. The
default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.16.28 |
fclAsynCfgX3UserP19EditingSignalThe value of this object defines the editing PAD
service signals. The authorized values are 'none'
(no editing PAD service signals),
'printingTerminal' (editing PAD service signals
for printing terminals), 'displayTerminal'
(editing PAD service signals for display
terminals). The default value is 'displayTerminal'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.16.29 |
fclAsynCfgX3UserP20EchoMaskThe value of this object is the echo mask. The
authorized values are '0..255'. The default value
is '64'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.16.30 |
fclAsynCfgX3UserP21ParityThe value of this object indicates the parity
treatment. The authorized values are 'none' (no
parity checking or generation), 'check' (parity
checking), 'generate' (parity generation),
'check-generate' (parity checking and generation).
The default value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.16.31 |
fclAsynCfgX3UserP22PageWaitThe value of this object defines the page wait.
The authorized values are '0..127'. The value '0'
indicates that the page wait is disabled. A value
between '1' and '127' is the number of Line Feed
characters sent by the equipment to the start-stop
mode DTE. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.16.32 |
fclAsynCfgConnLinkTableThis table contains the connection parameters
(link part) of asynchronous configurations. SEQUENCE OF FclAsynCfgConnLinkEntry .1.3.6.1.4.1.866.20.1.20.5.10.21 |
fclAsynCfgConnLinkEntryAn entry of fclAsynCfgConnLinkTable. FclAsynCfgConnLinkEntry .1.3.6.1.4.1.866.20.1.20.5.10.21.1 |
fclAsynCfgLinkConfigIdThe value of this object identifies one and only
one asynchronous configuration. The possible
values are : '0..199. If it is unused, the value
of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.21.1.1 |
fclAsynCfgLinkXonXoffParityThe value of this object indicates the XON/XOFF
parity. The default value is 'even'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.21.1.2 |
fclAsynCfgLinkServSignalParityThe value of this object indicates the signals
parity. The default value is 'even'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.21.1.3 |
fclAsynCfgLinkDataParityThe value of this object indicates the data
parity. The default value is 'even'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.21.1.4 |
fclAsynCfgLinkBitCountThe value of this object indicates the number of
bits by characters. The authorized values are '7'
or '8'. The default value is '7'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.21.1.5 |
fclAsynCfgLinkStopBitCountThe value of this object defines the number of
stop bits. The default value is 'one'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.21.1.6 |
fclAsynCfgLinkXonXoffSignalThe value of this object indicates if there are a
transmission of XOFF when moving to the command
mode and a transmission of XON when moving to the
data transmission mode. The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.21.1.7 |
fclAsynCfgLinkInactivityTimerThe value of this object defines the line
inactivity time-out in transfer state. When the
time-out expires, the call is cleared. For a
Minitel using a PSTN profile, the telephone
communication is cut when the VC is cleared (This
after T/2 seconds). The authorized values are
'0..2500'. The value '0' indicates no time-out.
The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.21.1.8 |
fclAsynCfgLinkBlockSizeThe value of this object indicates the number of
bytes received by the equipment in the receive
buffers. The authorized values are '1..128'. The
default value is '128'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.21.1.9 |
fclAsynCfgLinkCallResponseTimerThe value of this object is the supervision
time-out for response to a call request packet
sent on the link. A clear packet is sent if there
is no response after this period. The authorized
values are '10..2500'. The default value is '20'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.21.1.10 |
fclAsynCfgConnFacilityTableThis table contains the connection parameters
(facility part) of asynchronous configurations. SEQUENCE OF FclAsynCfgConnFacilityEntry .1.3.6.1.4.1.866.20.1.20.5.10.25 |
fclAsynCfgConnFacilityEntryAn entry of fclAsynCfgConnFacilityTable. FclAsynCfgConnFacilityEntry .1.3.6.1.4.1.866.20.1.20.5.10.25.1 |
fclAsynCfgFacConfigIdThe value of this object identifies one and only
one asynchronous configuration. The possible
values are : '0..199. If it is unused, the value
of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.25.1.1 |
fclAsynCfgFacClosedUserGroupThe value of this object specifies the behaviour
of the equipment with respect to the Closed User
Group (CUG) facility. There are 3 possible values
:
noCheck : the CUG is not checked,
clear : clearing if the CUG is present in the
call packet,
subscribe : clearing if the CUG is not present
in the call packet.
The default value is 'noCheck'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.2 |
fclAsynCfgFacReverseChargingThe value of this object specifies the behaviour
of the equipment with respect to the reverse
charging facility. If the called subscriber
doesn't accept the reverse charging, the call is
not transmitted and a clear is sent. The default
value is 'refuse'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.3 |
fclAsynCfgFacThroughputClassThe value of this object indicates if the
subscriber connected to the link has subscribed to
throughput class negociation facility. The
authorized values are 'clear' (not subscriber) or
'subscribe'. The default value is 'clear'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.10 |
fclAsynCfgFacDefOutThroughputClassThe value of this object indicates the default
throughput class in transmit direction (equipment
to remote peer). The default value is 9600 bits
per second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.11 |
fclAsynCfgFacDefInThroughputClassThe value of this object indicates the default
throughput class in receive direction (remote peer
to equipment). The default value is 9600 bits per
second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.12 |
fclAsynCfgFacMaxOutThroughputClassThe value of this object indicates the maximum
throughput class in transmit direction (equipment
to remote peer). The default value is 9600 bits
per second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.13 |
fclAsynCfgFacMaxInThroughputClassThe value of this object indicates the maximum
throughput class in receive direction (remote peer
to equipment). The default value is 9600 bits per
second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.14 |
fclAsynCfgFacPacketSizeThe value of this object indicates if the
subscriber connected to the link has subscribed to
packet size negociation facility. The authorized
values are 'clear' (not subscriber) or
'subscribe'. The default value is 'clear'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.20 |
fclAsynCfgFacDefOutPacketSizeThe value of this object indicates the default
packet size in transmit direction (equipment to
remote peer). The default value is 128 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.21 |
fclAsynCfgFacDefInPacketSizeThe value of this object indicates the default
packet size in receive direction (remote peer to
equipment). The default value is 128 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.22 |
fclAsynCfgFacMaxOutPacketSizeThe value of this object indicates the maximum
packet size in transmit direction (equipment to
remote peer). The default value is 128 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.23 |
fclAsynCfgFacMaxInPacketSizeThe value of this object indicates the maximum
packet size in receive direction (remote peer to
equipment). The default value is 128 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.24 |
fclAsynCfgFacMinOutPacketSizeThe value of this object indicates the minimum
packet size in transmit direction (equipment to
remote peer). The default value is 16 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.25 |
fclAsynCfgFacMinInPacketSizeThe value of this object indicates the minimum
packet size in receive direction (remote peer to
equipment). The default value is 16 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.26 |
fclAsynCfgFacWindowSizeThe value of this object indicates if the
subscriber connected to the link has subscribed to
the negociation of the transmit window size
facility. The authorized values are 'clear' (not
subscriber) or 'subscribe'. The default value is
'clear'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.25.1.30 |
fclAsynCfgFacDefOutWindowSizeThe value of this object indicates the default
window size in transmit direction (equipment to
remote peer). The authorized values are '1..7'.
The default value is '2'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.25.1.31 |
fclAsynCfgFacDefInWindowSizeThe value of this object indicates the default
window size in receive direction (remote peer to
equipment). The authorized values are '1..7'. The
default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.25.1.32 |
fclAsynCfgFacMaxOutWindowSizeThe value of this object indicates the maximum
window size in transmit direction (equipment to
remote peer). The authorized values are '1..7'.
The default value is '3'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.25.1.33 |
fclAsynCfgFacMaxInWindowSizeThe value of this object indicates the maximum
window size in receive direction (remote peer to
equipment). The authorized values are '1..7'. The
default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.25.1.34 |
fclAsynCfgConnServiceTableThis table contains the connection parameters
(service part) of asynchronous configurations. SEQUENCE OF FclAsynCfgConnServiceEntry .1.3.6.1.4.1.866.20.1.20.5.10.30 |
fclAsynCfgConnServiceEntryAn entry of fclAsynCfgConnServiceTable. FclAsynCfgConnServiceEntry .1.3.6.1.4.1.866.20.1.20.5.10.30.1 |
fclAsynCfgSerConfigIdThe value of this object identifies one and only
one asynchronous configuration. The possible
values are : '0..199. If it is unused, the value
of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.30.1.1 |
fclAsynCfgSerCompressionThe value of this object indicates the compression
enabling for each direction. The authorized values
are :
off : no compression,
networkToSubscriber : compression of the flow
from the remote peer to the equipment,
subscriberToNetwork : compression of the flow
from the equipment to the remote peer,
bothway : compression of the two flows from and
to the equipment.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.30.1.2 |
fclAsynCfgSerCompressNegociationThe value of this object indicates whether the
compression facility is negociated or not and, if
negociated, the optional/obligatory status. The
authorized values are :
off' :no negociation,
onOptionalCompression : negociation but
compression is optional,
onMandatoryCompression : negociation and
compression is mandatory.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.30.1.3 |
fclAsynCfgSerCompressScramblingThe value of this object indicates, when the
compression is active, whether the scrambling is
enabled or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.30.1.4 |
fclAsynCfgSerCompressMultiPacketsTimerThe value of this object defines the maximum
waiting time, in milliseconds by steps of 100
milliseconds , which, if there is not another
packet to compress, the packet of compressed
packets is sent beyond (this permits to reduce the
number of packets transmitted to the remote peer).
The authorized values are '0..1500'. '0' means no
packets grouping (i. e. : each packet is
individually compressed and sent). The default
value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.30.1.5 |
fclAsynCfgSerX29ReselectionThe value of this object indicates whether the
subscriber connected to the link has subscribed to
X29 reselection or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.30.1.6 |
fclAsynCfgSerCallReturnTransmissionThe value of this object indicates whether the
'call return' packet may be sent on this link or
not. The 'call return' packet, sent to the
previous equipment, makes this equipments search
for another route to join the called DTE. The
defaut value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.30.1.7 |
fclAsynCfgSerDBitModificationThe value of this object specifies the management
of the D bit. The authorized values are 'off' or
'clear' (in this case, there is clearing ....) or
'on'. The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.30.1.8 |
fclAsynCfgSerReliableVcThe value of this object is used to enable the
Reliable Virtual Circuit service. The authorized
values are :
off : no RVC, the VCs are considered as normal
VCs, no particular processing,
clear : RVCs are not allowed for the
subscriber, each attempt to establish a
RVC provokes a clear of the connection,
subscribe : all calls transmitted by the
subscriber establish RVCs, it is also
possible to receive calls with RVC option,
check :
for a link to a subscriber : when a call with
RVC option is received, a RVC is
established
for a link to a network : the RVC option is
ignored when it is present in a call sent
by a local subscriber, the connection is
cleared when the RVC option is present in
a call sent by the network.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.30.1.9 |
fclAsynCfgSerCosCOSrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.30.1.20 |
fclAsynCfgSerCirEntrant CIRrw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.30.1.21 |
fclAsynCfgSerMinCirEntrant CIR minirw INTEGER .1.3.6.1.4.1.866.20.1.20.5.10.30.1.22 |
fclAsynCfgSerConversionAimedPointConversion adresse : point viserw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.30.1.30 |
fclAsynCfgSerConversionIncomingCallConversion d'adresse sur appel entrantrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.30.1.31 |
fclAsynCfgSerConversionOutgoingCallConversion adresse sur appel sortantrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.30.1.32 |
fclAsynCfgSerConversionAddressCheckConversion adresse : controle de la presence dans
les tables de conversionrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.10.30.1.33 |
fclAsynAutoCalls OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.5.20 |
fclAsynAutoCallTableThis table contains the asynchronous logical ports
for which a call is automatically sent when the
operational state of this LP becomes 'up'. For
each LP this table defines the addres of the
called remote peer and the different parameters of
the call processing. SEQUENCE OF FclAsynAutoCallEntry .1.3.6.1.4.1.866.20.1.20.5.20.1 |
fclAsynAutoCallEntryAn entry of fclAsynAutoCallTable. FclAsynAutoCallEntry .1.3.6.1.4.1.866.20.1.20.5.20.1.1 |
fclAsynAutoLogPortIdThe value of this object identifies one and only
one asynchronous logical port. The possible values
are : '0..131'. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.20.1.1.1 |
fclAsynAutoStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.20.1.1.2 |
fclAsynAutoCalledAddrThe value of this object is the X121 address of
the called remote peer. This value is the called
address specified in the call packet sent from
this logical port. The value may contain up to 15
digits (digits 0..9). The value must be completed
with 'F' digits for a total of 16 digits. The
equipment configurator does not need final
completion. The default value is 'FF FF FF FF FF
FF FF FF' meaning 'empty value' (blank value on
the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.5.20.1.1.5 |
fclAsynAutoFacilityThe value of this object indicates the facilities
set in the call packet. The authorized values are
'none' (no facility), 'reverseCharging' (code
'0101'), 'cug' (code '0300'),
'reverseCharging-cug' (code '01010300'),
'throughputClass' (code '02xx' where 'x' is the
throughput class code defined by
fclAsynAutoFacThroughputClass). The default value
is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.20.1.1.6 |
fclAsynAutoFacThroughputClassThe value of this object indicates the throughput
class facility set in the call packet when the
object fclAsynAutoFacility is set to
'throughputClass'. The authorized values, in bits
per second, are 75 (code '3'), 150 (code '4'), 300
(code '5'), 600 (code '6'), 1200 (code '7'), 2400
(code '8'), 4800 (code '9'), 9600 (code 'A'),
19200 (code 'B'), 48000 (code 'C'), 64000 (code
'D'), 128000 (code 'E'), 192000 (code 'F'). The
default value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.20.1.1.7 |
fclAsynAutoCallUserDataAsciiThe value of this object is the call user data
specified in DisplayString format. When both
objects fclAsynAutoCallUserDataAscii and
fclAsynAutoCallUserDataAscii are not empty the
first one is ignored. The value may contain up to
12 characters. The default value is an empty
string.rw DisplayString .1.3.6.1.4.1.866.20.1.20.5.20.1.1.10 |
fclAsynAutoCallUserDataHexaThe value of this object is the call user data
specified in OCTET STRING format. When both
objects fclAsynAutoCallUserDataAscii and
fclAsynAutoCallUserDataAscii are not empty the
first one is ignored. 13 bytes from 00 to FF must
be specified. The first byte contains the number
of following useful bytes. The trailing bytes must
be set to 'FF'. The equipment configurator does
not need this final completion. The default value
is 'empty' (first byte set to '00').rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.5.20.1.1.11 |
fclAsynAutoMinimumRecallTimerThe value of this object specifies the minimum
recall time (in seconds) between two successive
calls. The authorized values are '0..990' by step
of 10. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.20.1.1.15 |
fclAsynAutoDiscardCharDuringTimerThe value of this object specifies the reaction of
the equipment receiving a character from the
asynchronous device during the recall time :
either stops the timer and lets the operator with
his asynchronous device to type any X28 command
('No' value), or discards the character and lets
go on the recall timer('Yes' value). The
authorized values are 'Yes' or 'No'. The default
value is 'No'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.20.1.1.16 |
fclAsynAutoVdxKeyTranslationTableThis table contains the logical ports for which a
call is automatically sent when the operational
state of this LP becomes 'up'. This table
describes how the videotext keyboard function keys
are translated. SEQUENCE OF FclAsynAutoVdxKeyTranslationEntry .1.3.6.1.4.1.866.20.1.20.5.20.2 |
fclAsynAutoVdxKeyTranslationEntryAn entry of fclAsynAutoVdxKeyTranslationTable. FclAsynAutoVdxKeyTranslationEntry .1.3.6.1.4.1.866.20.1.20.5.20.2.1 |
fclAsynAutoTransLpIdThe value of this object identifies one and only
one asynchronous logical port. The possible values
are : '0..131'. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.20.2.1.1 |
fclAsynAutoTransTranscodingThe value of this object indicates whether the
videotext keyboard function keys are transcoded or
not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.20.2.1.2 |
fclAsynAutoTransProfileThe value of this object is the X3 profile number
used during the transfert. The authorized values
are 'p1' (profile number 1), 'p2' (profile number
2). The default value is 'p1'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.20.2.1.3 |
fclAsynAutoTransAutoTermModeThe value of this object indicates whether the
automatic changeover to data communication
standard during data transfert is enabled or not.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.20.2.1.4 |
fclAsynAutoTransCFKeyHandlingThe value of this object indicates the handling of
the videotext keyboard 'connexion/fin' key. The
authorized values are 'local' (.....), 'remote'
(....). The default value is 'local'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.20.2.1.5 |
fclAsynAutoTransClearHangUpThe value of this object indicates whether the
local communication is hang up (case PSTN link)
when a clear packet is received or not. The
default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.20.2.1.6 |
fclAsynMnemonic OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.5.21 |
fclAsynMnemonicTableThis table contains mnemonics that permit to
associate names to remote peer. For each name this
table defines the addres of the called remote peer
and the different parameters of the call
processing. SEQUENCE OF FclAsynMnemonicEntry .1.3.6.1.4.1.866.20.1.20.5.21.1 |
fclAsynMnemonicEntryAn entry of fclAsynMnemonicTable. FclAsynMnemonicEntry .1.3.6.1.4.1.866.20.1.20.5.21.1.1 |
fclAsynMneMnemonicIdThe value of this object identifies one and only
one mnemonic (this value is used as index of this
table instead of the mnemonic name to make the
SNMP managers handle correctly this table). The
possible values are : '0..99'. If it is unused,
the value of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.21.1.1.1 |
fclAsynMneStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.21.1.1.2 |
fclAsynMneNameThe value of this object is the mnemonic name. The
value may contain up to 6 characters. The default
value is an empty string.rw DisplayString .1.3.6.1.4.1.866.20.1.20.5.21.1.1.3 |
fclAsynMneCalledAddrThe value of this object is the X121 address of
the called remote peer. This value is the called
address specified in the call packet sent from
this logical port. The value may contain up to 15
digits (digits 0..9). The value must be completed
with 'F' digits for a total of 16 digits. The
equipment configurator does not need final
completion. The default value is 'FF FF FF FF FF
FF FF FF' meaning 'empty value' (blank value on
the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.5.21.1.1.5 |
fclAsynMneFacilityThe value of this object indicates the facilities
set in the call packet. The authorized values are
'none' (no facility), 'reverseCharging' (code
'0101'), 'cug' (code '0300'),
'reverseCharging-cug' (code '01010300'),
'throughputClass' (code '02xx' where 'x' is the
throughput class code defined by
fclAsynMneFacThroughputClass). The default value
is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.21.1.1.6 |
fclAsynMneFacThroughputClassThe value of this object indicates the throughput
class facility set in the call packet when the
object fclAsynMneFacility is set to
'throughputClass'. The authorized values, in bits
per second, are 75 (code '3'), 150 (code '4'), 300
(code '5'), 600 (code '6'), 1200 (code '7'), 2400
(code '8'), 4800 (code '9'), 9600 (code 'A'),
19200 (code 'B'), 48000 (code 'C'), 64000 (code
'D'), 128000 (code 'E'), 192000 (code 'F'). The
default value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.21.1.1.7 |
fclAsynMneCallUserDataAsciiThe value of this object is the call user data
specified in DisplayString format. When both
objects fclAsynMneCallUserDataAscii and
fclAsynMneCallUserDataAscii are not empty the
first one is ignored. The value may contain up to
12 characters. The default value is an empty
string.rw DisplayString .1.3.6.1.4.1.866.20.1.20.5.21.1.1.10 |
fclAsynMneCallUserDataHexaThe value of this object is the call user data
specified in OCTET STRING format. When both
objects fclAsynMneCallUserDataAscii and
fclAsynMneCallUserDataAscii are not empty the
first one is ignored. 13 bytes from 00 to FF must
be specified. The first byte contains the number
of following useful bytes. The trailing bytes must
be set to 'FF'. The equipment configurator does
not need this final completion. The default value
is 'empty' (first byte set to '00').rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.5.21.1.1.11 |
fclAsynMneVdxKeyTranslationTableThis table contains mnemonics that permit to
associate names to remote peer. This table
describes how the videotext keyboard function keys
are translated. SEQUENCE OF FclAsynMneVdxKeyTranslationEntry .1.3.6.1.4.1.866.20.1.20.5.21.2 |
fclAsynMneVdxKeyTranslationEntryAn entry of fclAsynMneVdxKeyTranslationTable. FclAsynMneVdxKeyTranslationEntry .1.3.6.1.4.1.866.20.1.20.5.21.2.1 |
fclAsynMneTransMnemonicIdThe value of this object identifies one and only
one mnemonic (this value is used as index of this
table instead of the mnemonic name to make the
SNMP managers handle correctly this table). The
possible values are : '0..99. If it is unused, the
value of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.21.2.1.1 |
fclAsynMneTransNameThe value of this object is the mnemonic name.ro DisplayString .1.3.6.1.4.1.866.20.1.20.5.21.2.1.2 |
fclAsynMneTransTranscodingThe value of this object indicates whether the
videotext keyboard function keys are transcoded or
not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.21.2.1.3 |
fclAsynMneTransProfileThe value of this object is the X3 profile number
used during the transfert. The authorized values
are 'p1' (profile number 1), 'p2' (profile number
2). The default value is 'p1'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.21.2.1.4 |
fclAsynMneTransAutoTermModeThe value of this object indicates whether the
automatic changeover to data communication
standard during data transfert is enabled or not.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.21.2.1.5 |
fclAsynMneTransCFKeyHandlingThe value of this object indicates the handling of
the videotext keyboard 'connexion/fin' key. The
authorized values are 'local' (.....), 'remote'
(....). The default value is 'local'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.21.2.1.6 |
fclAsynMneTransClearHangUpThe value of this object indicates whether the
local communication is hang up (case PSTN link)
when a clear packet is received or not. The
default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.21.2.1.7 |
fclAsynPstnRemotePeerTableThis table contains the remote peers to call by
Public Switched Telephone Network way. SEQUENCE OF FclAsynPstnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.5.25 |
fclAsynPstnRemotePeerEntryAn entry of fclAsynPstnRemotePeerTable. FclAsynPstnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.5.25.1 |
fclAsynPstnRemX121AddrThe value of this object is the X121 address of
the called remote peer. The value may contain up
to 15 digits (digits 0..9, B, D).
The digits 'B', 'D' (respectively characters '*',
'?' on the equipment configurator) have special
meanings :
'B' matches any address. When used it must be
the only digit specified (with final
completion as explained below).
'D' matches any single digit.
The value must be completed with 'F' digits for a
total of 16 digits. The equipment configurator
does not need final completion. The default value
is 'FF FF FF FF FF FF FF FF' meaning 'empty value'
(blank value on the equipment configurator).ro OCTET STRING .1.3.6.1.4.1.866.20.1.20.5.25.1.1 |
fclAsynPstnRemStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.5.25.1.2 |
fclAsynPstnRemPstnNumberThe value of this object is the PSTN address of
the called remote peer. The value may contain up
to 28 digits (digits 0..E).
The digits 'A', 'B', 'C', 'D', 'E' (respectively
characters 'W', ',', 'P', 'T', '!' on the
equipment configurator) have special meanings :
'A' means 'attente de tonalite',
'B' means 'pause of 2 seconds',
'C' means 'numerotation decimale',
'D' means 'numerotation multifrequence',
'E' means 'raccrocher 0.5 second'.
The value must be completed with 'F' digits for a
total of 28 digits. The equipment configurator
does not need final completion. The default value
is 'FF FF FF FF FF FF FF FF' meaning 'empty value'
(blank value on the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.5.25.1.3 |
fclAsynNetUserTableThis table contains user identifications. SEQUENCE OF FclAsynNetUserEntry .1.3.6.1.4.1.866.20.1.20.5.26 |
fclAsynNetUserEntryAn entry of fclAsynNetUserTable. FclAsynNetUserEntry .1.3.6.1.4.1.866.20.1.20.5.26.1 |
fclAsynNetUserIdThe value of this object identifies one and only
one user (this value is used as index of this
table instead of the NUI to make the SNMP managers
handle correctly this table). The possible values
are : '0..254'. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.5.26.1.1 |
fclAsynNetStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.5.26.1.2 |
fclAsynNetNuiThe value of this object is the NUI (Network User
Identifier). The authorized values are all the
alphabetical characters strings on 6 characters.
The default value is the empty string.rw DisplayString .1.3.6.1.4.1.866.20.1.20.5.26.1.3 |
fclAsynNetNuaThe value of this object is the NUA (Network User
Access). The authorized values are '0..9999'. If
it is unused, the value is '65535'. The default
value is '65535'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.5.26.1.4 |
fclFrameRelayAccessLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.13 |
fclFraLogPortTableThis table defines the general parameters of Frame
Relay Access logical ports. These FRA logical
ports are used when X25 Virtual Channel must be
established between local FR PVC (Frame Relay
Permanent Virtual Circuit) end points and remote
FR PVC end points through a X25 network. They are
not adapted to cross a Frame Relay network (see FR
CE logical ports in this case). SEQUENCE OF FclFraLogPortEntry .1.3.6.1.4.1.866.20.1.20.13.1 |
fclFraLogPortEntryAn entry of fclFraLogPortTable. FclFraLogPortEntry .1.3.6.1.4.1.866.20.1.20.13.1.1 |
fclFraLpLogPortIdThe value of this object identifies one and only
one Frame Relay Access logical port. The possible
values are : '0..131'. If it is unused, the value
of this parameter is '255'. The default value is
'255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.13.1.1.1 |
fclFraLpInterfaceIdThe value of this object identifies the line
interface used by this FRA logical port. The
possible values are : '0..35'. If it is unused,
the value of this parameter is '255'. The default
value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.1.1.2 |
fclFraLpLmiThe value of this object defines which kind of
signalling is used on this FRA logical port. The
possible values are 'off' (no signalling), lmiUni
(Link Management Interface - User to Network
Interface : the equipment performs user-side
procedures), lmiNui (Link Management Interface -
Network to User Interface : the equipment performs
network-side procedures). The default value is
'255'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.13.1.1.3 |
fclFraLpGroupingThresholdThe value of this object is the input resource
threshold over which several input frames coming
from a FR PVC end point are grouped in a single
X25 packet to cross the X25 network. The enabling
of this grouping is PVC end point specific (see
fclFraPvcEncapsulation). The possible values are :
'1..97'. The thresholds must be set as following :
fclFraLpGroupingThreshold <
fclFraLpFecnBecnThreshold <
fclFraLpDeDiscardThreshold <
fclFraLpAllDiscardThreshold. The default value is
'1'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.1.1.5 |
fclFraLpFecnBecnThresholdThe value of this object is the input resource
threshold over which bits FECN (Forward Explicit
Congestion Notification) of input frames and BECN
(Backward Explicit Congestion Notification) of
output frames are set to 1. The possible values
are : '2..98'. The thresholds must be set as
following : fclFraLpGroupingThreshold <
fclFraLpFecnBecnThreshold <
fclFraLpDeDiscardThreshold <
fclFraLpAllDiscardThreshold. The default value is
'10'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.1.1.6 |
fclFraLpDeDiscardThresholdThe value of this object is the input resource
threshold over which input frames with bit DE
(Discard Eligible) set to 1 are discarded (i.e. :
not sent accross the X25 network). The possible
values are : '3..99'. The thresholds must be set
as following : fclFraLpGroupingThreshold <
fclFraLpFecnBecnThreshold <
fclFraLpDeDiscardThreshold <
fclFraLpAllDiscardThreshold. The default value is
'15'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.1.1.7 |
fclFraLpAllDiscardThresholdThe value of this object is the input resource
threshold over which all input frames are
discarded (i.e. : not sent accross the X25
network). The possible values are : '4..100'. The
thresholds must be set as following :
fclFraLpGroupingThreshold <
fclFraLpFecnBecnThreshold <
fclFraLpDeDiscardThreshold <
fclFraLpAllDiscardThreshold. The default value is
'20'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.1.1.8 |
fclFraLpX25InterframeFlagCountThe value of this object is the number of
interframe flags (it concerns the framing aspects
of link access procedures of X25 and not the fact
to put several frames coming from a FR PVC end
point in a single X25 packet). The possible values
are : '1..15'. The default value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.1.1.9 |
fclFraLpInactivityCheckDelayThe value of this object is the inactivity check
delay in minutes.............. The possible values
are : '0..254'. The value '0' disables this
clearing mechanism. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.1.1.10 |
fclFraLpCompressionThe value of this object indicates the compression
enabling for each direction. The authorized values
are :
off : no compression,
networkToSubscriber : compression of the flow
from the remote peer to the equipment,
subscriberToNetwork : compression of the flow
from the equipment to the remote peer,
bothway : compression of the two flows from and
to the equipment.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.13.1.1.20 |
fclFraLpCompressNegotiationThe value of this object indicates whether the
compression facility is negociated or not and, if
negociated, the optional/obligatory status. The
authorized values are :
off' :no negociation,
onOptionalCompression : negociation but
compression is optional,
onMandatoryCompression : negociation and
compression is mandatory.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.13.1.1.21 |
fclFraLpCompressScramblingThe value of this object indicates, when the
compression is active, whether the scrambling is
enabled or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.13.1.1.22 |
fclFraLpCompressMultiPacketsTimerThe value of this object defines the maximum
waiting time, in milliseconds by steps of 100
milliseconds , which, if there is not another
packet to compress, the packet of compressed
packets is sent beyond (this permits to reduce the
number of packets transmitted to the remote peer).
The authorized values are '0..1500'. '0' means no
packets grouping (i. e. : each packet is
individually compressed and sent). The default
value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.1.1.23 |
fclFraLpReliableVcThe value of this object is used to enable the
Reliable Virtual Circuit service. The authorized
values are :
off : no RVC, the VCs are considered as normal
VCs, no particular processing,
clear : RVCs are not allowed for the
subscriber, each attempt to establish a
RVC provokes a clear of the connection,
subscribe : all calls transmitted by the
subscriber establish RVCs, it is also
possible to receive calls with RVC option,
check :
for a link to a subscriber : when a call with
RVC option is received, a RVC is
established
for a link to a network : the RVC option is
ignored when it is present in a call sent
by a local subscriber, the connection is
cleared when the RVC option is present in
a call sent by the network.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.13.1.1.24 |
fclFraLmiTableThis table defines the LMI (Link Management
Interface) parameters of Frame Relay Access
logical ports with LMI signalling. SEQUENCE OF FclFraLmiEntry .1.3.6.1.4.1.866.20.1.20.13.2 |
fclFraLmiEntryAn entry of fclFraLmiTable. FclFraLmiEntry .1.3.6.1.4.1.866.20.1.20.13.2.1 |
fclFraLmiLogPortIdThe value of this object identifies one and only
one Frame Relay Access logical port with LMI (Link
Management Interface) signalling. The possible
values are : '0..131'. If it is unused, the value
of this parameter is '255'. The default value is
'255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.13.2.1.1 |
fclFraLmiDlciThe value of this object is the DLCI Data Link
Connection Identifier of the Frame Relay PVC
(Permanent Virtual Circuit) used by LMI to
exchange management datas with the facing peer.
The possible values are '0' or '1023'. The default
value is '0'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.13.2.1.2 |
fclFraLmiLmiStandardThe value of this object defines which standard is
used. The possible values are 'ansiT1-617d' (ANSI
T1.617 Annex D) or 'itutQ933a' (ITU-T Q.933 Annex
A). The default value is 'ansiT1-617d'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.13.2.1.3 |
fclFraLmiAccessibilityConditionThe value of this object defines calculation mode
of the 'up' operational status of the logical
port. The operational state may be deducted using
the N393 mechanism (value 'n393') or, more
rapidly, withoutis using this mechanism (value
'fast'). The default value is 'fast'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.13.2.1.4 |
fclFraLmiN391FullStatusPollCountThe value of this object identifies the user-side
N391 full status polling cycle value for this
logical port. This the number of status enquiry
intervals that pass before issuance of full status
enquiry message. If the logical port is not
performing user-side procedures, then this value
is meaningless. The authorized values are
'1..254'. The default value is '6'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.2.1.5 |
fclFraLmiN392ErrorThresholdThe value of this object identifies the user-side
or network-side N392 error threshold value for
this logical port. This is the maximum number of
unanswered Status Enquiries the equipment shall
accept before declaring the logical port down. The
authorized values are '1..10. The default value is
'3'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.2.1.6 |
fclFraLmiN393MonitoredEventCountThe value of this object identifies the user-side
or network-side N393 monitored events count value
for this logical port. This is the number of
status polling intervals over which the error
threshold is counted. For example if within
'MonitoredEvents' number of events the equipment
receives 'ErrorThreshold' number of errors, the
logical port is marked as down. The authorized
values are '1..10. The default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.2.1.7 |
fclFraLmiT391LinkIntegPollTimerThe value of this object identifies the user-side
T391 link integrity verification polling timer
value for this logical port. This is the number of
seconds between successive status enquiry
messages. If the logical port is not performing
user-side procedures, then this value is
meaningless. The authorized values are '5..30'.
The default value is '10'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.2.1.8 |
fclFraLmiT392PollingVerifTimerThe value of this object identifies the
network-side T392 polling verification timer value
(nT2 for LMI) for this logical port. This value is
expressed in seconds. If the logical port is not
performing network-side procedures, then this
value is meaningless. The authorized values are
'5..30'. The default value is '15'rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.2.1.9 |
fclFraPvcEndPointTableThis table defines the Frame Relay PVC
(Permananent Virtual Circuit) end points on Frame
Relay Access logical ports. For each PVC end point
this table defines the addres of the called remote
peer and the different parameters of the call
processing. SEQUENCE OF FclFraPvcEndPointEntry .1.3.6.1.4.1.866.20.1.20.13.3 |
fclFraPvcEndPointEntryAn entry of fclFraPvcEndPointTable. FclFraPvcEndPointEntry .1.3.6.1.4.1.866.20.1.20.13.3.1 |
fclFraPvcLogPortIdThe value of this object identifies one and only
one Frame Relay Access logical port. This is the
logical port this PVC (Permanent Virtual Circuit)
end point is layered onto. The possible values are
: '0..131'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.13.3.1.1 |
fclFraPvcDlciThe value of this object is equal to the DLCI
(Data Link Connection Identifier) value for this
PVC (Permanent Virtual Circuit) end point. The
possible values are : '0..1023. If it is unused,
the value of this parameter is '65535'. The
default value is '65535'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.13.3.1.2 |
fclFraPvcStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.13.3.1.3 |
fclFraPvcCalledAddrThe value of this object is the X121 address of
the called remote peer PVC end point. This value
is the called address specified in the call packet
sent from this PVC end point. The value may
contain up to 15 digits (digits 0..9). The value
must be completed with 'F' digits for a total of
16 digits. The equipment configurator does not
need final completion. The default value is 'FF FF
FF FF FF FF FF FF' meaning 'empty value' (blank
value on the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.13.3.1.5 |
fclFraPvcSubscriberNumberThe value of this object is the SB number added to
the DNICZO of the equipment to make the calling
address in a call sent from this PVC end point.
The value must contain 4 digits (digits 0..9). The
default value is 'FF FF'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.3.1.6 |
fclFraPvcCallDirectionThe value of this object defines the mode used to
establish the X25 VC between this PVC end point
and the remote one on the other side of the X25
network. The authorized values are 'calling' (the
caller is this PVC end point), 'called' (the
caller is the remote PVC end point), 'auto'
(automatic choise between 'calling' and 'called').
The default value is 'auto'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.13.3.1.7 |
fclFraPvcEncapsulationThe value of this object defines how FR frames are
transported in the X25 VC between this PVC end
point and the remote one on the other side of the
X25 network. The authorized values are 'none'
(each FR frame is put in one X25 packet without
any particular treatment), 'fastSelect' (Fast
select is requested in the call packet),
'fastSelect-frHeader' (Fast select is requested in
the call packet, the FR header is also
transported), 'fastSelect-frHeader-grouping' (Fast
select is requested in the call packet, the FR
header is also transported, several FR frames may
be grouped in only one X25 packet). The default
value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.13.3.1.8 |
fclFraPvcMinRecallTimerThe value of this object specifies the minimum
recall time (in seconds) between two successive
calls. The authorized values are '0..990' by step
of 10. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.3.1.10 |
fclFraPvcInactivityTimerThe value of this object is the inactivity time in
seconds.............. The possible values are :
'0..2540'. This clearing mechanism is enabled or
disabled on the logical port (see
fclFraLpInactivityCheckDelay). The default value
is '30'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.13.3.1.11 |
fclHdlcAccessLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.14 |
fclHdlcLogPortTableThis table defines the general parameters of HDLC
(High-level Data Link Control) access logical
ports. SEQUENCE OF FclHdlcLogPortEntry .1.3.6.1.4.1.866.20.1.20.14.1 |
fclHdlcLogPortEntryAn entry of fclHdlcLogPortTable. FclHdlcLogPortEntry .1.3.6.1.4.1.866.20.1.20.14.1.1 |
fclHdlcLpLogPortIdThe value of this object identifies one and only
one HDLC (High-level Data Link Control) access
logical port. The possible values are : '0..131'.
If it is unused, the value of this parameter is
'255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.14.1.1.1 |
fclHdlcLpInterfaceIdThe value of this object identifies the line
interface used by this HDLC logical port. The
possible values are : '0..35'. If it is unused,
the value of this parameter is '255'. The default
value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.14.1.1.2 |
fclHdlcLpCrcTransportThe value of this object indicates whether the CRC
(Cyclic Redundancy Check) is transported or not.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.14.1.1.3 |
fclHdlcLpGroupingThresholdThe value of this object is the input resource
threshold over which several input frames coming
from this HDLC logical port are grouped in a
single X25 packet. See fclHdlcAutoEncapsulation to
enable this grouping. The possible values are :
'1..97'. The thresholds must be set as following :
fclHdlcLpGroupingThreshold <
fclHdlcLpAllDiscardThreshold. The default value is
'1'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.14.1.1.5 |
fclHdlcLpAllDiscardThresholdThe value of this object is the input resource
threshold over which all input frames are
discarded (i.e. : not sent accross the network).
The possible values are : '4..100'. The thresholds
must be set as following :
fclHdlcLpGroupingThreshold <
fclHdlcLpAllDiscardThreshold. The default value is
'20'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.14.1.1.8 |
fclHdlcLpX25InterframeFlagCountThe value of this object is the number of
interframe flags (it concerns the framing aspects
of link access procedures of X25 and not the fact
to put several frames coming from this HDLC
logical port in a single X25 packet). The possible
values are : '1..15'. The default value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.14.1.1.9 |
fclHdlcLpInactivityCheckDelayThe value of this object is the inactivity check
delay in minutes.............. The possible values
are : '0..254'. The value '0' disables this
clearing mechanism. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.14.1.1.10 |
fclHdlcLpCompressionThe value of this object indicates the compression
enabling for each direction. The authorized values
are :
off : no compression,
networkToSubscriber : compression of the flow
from the remote peer to the equipment,
subscriberToNetwork : compression of the flow
from the equipment to the remote peer,
bothway : compression of the two flows from and
to the equipment.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.14.1.1.20 |
fclHdlcLpCompressNegotiationThe value of this object indicates whether the
compression facility is negociated or not and, if
negociated, the optional/obligatory status. The
authorized values are :
off' :no negociation,
onOptionalCompression : negociation but
compression is optional,
onMandatoryCompression : negociation and
compression is mandatory.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.14.1.1.21 |
fclHdlcLpCompressScramblingThe value of this object indicates, when the
compression is active, whether the scrambling is
enabled or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.14.1.1.22 |
fclHdlcLpCompressMultiPacketsTimerThe value of this object defines the maximum
waiting time, in milliseconds by steps of 100
milliseconds , which, if there is not another
packet to compress, the packet of compressed
packets is sent beyond (this permits to reduce the
number of packets transmitted to the remote peer).
The authorized values are '0..1500'. '0' means no
packets grouping (i. e. : each packet is
individually compressed and sent). The default
value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.14.1.1.23 |
fclHdlcLpReliableVcThe value of this object is used to enable the
Reliable Virtual Circuit service. The authorized
values are :
off : no RVC, the VCs are considered as normal
VCs, no particular processing,
clear : RVCs are not allowed for the
subscriber, each attempt to establish a
RVC provokes a clear of the connection,
subscribe : all calls transmitted by the
subscriber establish RVCs, it is also
possible to receive calls with RVC option,
check :
for a link to a subscriber : when a call with
RVC option is received, a RVC is
established
for a link to a network : the RVC option is
ignored when it is present in a call sent
by a local subscriber, the connection is
cleared when the RVC option is present in
a call sent by the network.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.14.1.1.24 |
fclHdlcLpCosCOSrw Enumeration .1.3.6.1.4.1.866.20.1.20.14.1.1.30 |
fclHdlcLpCirEntrant CIRrw INTEGER .1.3.6.1.4.1.866.20.1.20.14.1.1.31 |
fclHdlcLpMinCirEntrant CIR minirw INTEGER .1.3.6.1.4.1.866.20.1.20.14.1.1.32 |
fclHdlcAutoCallTableThis table contains the HDLC logical ports for
which a call is automatically sent when the
operational state of this LP becomes 'up'. For
each LP this table defines the addres of the
called remote peer and the different parameters of
the call processing. SEQUENCE OF FclHdlcAutoCallEntry .1.3.6.1.4.1.866.20.1.20.14.2 |
fclHdlcAutoCallEntryAn entry of fclHdlcAutoCallTable. FclHdlcAutoCallEntry .1.3.6.1.4.1.866.20.1.20.14.2.1 |
fclHdlcAutoLogPortIdThe value of this object identifies one and only
one HDLC logical port. The possible values are :
'0..131'. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.14.2.1.1 |
fclHdlcAutoCalledAddrThe value of this object is the X121 address of
the called remote peer. This value is the called
address specified in the call packet sent from
this logical port. The value may contain up to 15
digits (digits 0..9). The value must be completed
with 'F' digits for a total of 16 digits. The
equipment configurator does not need final
completion. The default value is 'FF FF FF FF FF
FF FF FF' meaning 'empty value' (blank value on
the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.14.2.1.5 |
fclHdlcAutoSubscriberNumberThe value of this object is the SB number added to
the DNICZO of the equipment to make the calling
address in a call sent from this HDLC logical
port. The value must contain 2 digits (digits
0..9). The default value is 'FF FF'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.14.2.1.6 |
fclHdlcAutoCallDirectionThe value of this object defines the mode used to
establish the X25 VC between this HDLC logical
port and the remote one on the other side of the
network. The authorized values are 'calling' (the
caller is this HDLC logical port), 'called' (the
caller is this remote HDLC logical port), 'auto'
(automatic choise between 'calling' and 'called').
The default value is 'auto'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.14.2.1.7 |
fclHdlcAutoEncapsulationThe value of this object defines how HDLC frames
are transported in the X25 VC between this HDLC
logical port and the remote one on the other side
of the network. The authorized values are 'none'
(each FR frame is put in one packet without any
particular treatment), 'fastSelect' (Fast select
is requested in the call packet),
'fastSelect-frHeader' (Fast select is requested in
the call packet, the FR header is also
transported), 'fastSelect-frHeader-grouping' (Fast
select is requested in the call packet, the FR
header is also transported, several FR frames may
be grouped in only one packet). The default value
is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.14.2.1.8 |
fclHdlcAutoMinRecallTimerThe value of this object specifies the minimum
recall time (in seconds) between two successive
calls. The authorized values are '0..990' by step
of 10. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.14.2.1.10 |
fclHdlcAutoInactivityTimerThe value of this object is the inactivity time in
seconds.............. The possible values are :
'0..2540'. See fclHdlcLpInactivityCheckDelay to
enable or disable this clearing. The default value
is '30'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.14.2.1.11 |
fclSdlcLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.15 |
fclSdlcLogPortTableThis table defines the general parameters of SDLC
(Synchronous Data Link Control) access logical
ports. These SDLC logical ports are used in SNA
(Systems Network Architecture) to cross X25 or
Frame Relay networks. SEQUENCE OF FclSdlcLogPortEntry .1.3.6.1.4.1.866.20.1.20.15.1 |
fclSdlcLogPortEntryAn entry of fclSdlcLogPortTable. FclSdlcLogPortEntry .1.3.6.1.4.1.866.20.1.20.15.1.1 |
fclSdlcLpLogPortIdThe value of this object identifies one and only
one SDLC (Synchronous Data Link Control) access
logical port in SNA (Systems Network
Architecture). The possible values are : '0..131'.
If it is unused, the value of this parameter is
'255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.15.1.1.1 |
fclSdlcLpInterfaceIdThe value of this object identifies the line
interface used by this SDLC logical port. The
possible values are : '0..35'. If it is unused,
the value of this parameter is '255'. The default
value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.15.1.1.2 |
fclSdlcLpPhysicalUnitTypeThe value of this object indicates the type of the
physical unit(s) which are in front of this SDLC
logical port. The PU may be 'primary' or
'secondary'. Primary PUs poll secondary Pus in a
predetermined order and then secondaries transmit
if they have outgoing data. The equipment acts as
a primary PU in front of secondaries PU and, on
the other side, it acts as secondaries PU in front
of a primary PU.
The default value is 'secondary' (so the equipment
acts as primary PU).rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.1.1.3 |
fclSdlcLpSubscriberNumberThe value of this object is the SB number added to
the DNICZO of the equipment to make the calling
address in a call sent from this logical port. The
value must contain 2 digits (digits 0..9). The
default value is 'FF'.rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.15.1.1.4 |
fclSdlcLpBitEncodingThe value of this object indicates whether the
coding format is NRZ (Non Return to Zero) or NRZI
(Non Return to Zero Inverted) The default value is
'nrz'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.1.1.5 |
fclSdlcLpUnknownPacketsThe value of this object indicates, when the
equipment receives an unknown packet on this
logical port, whether it clears the WAN connection
or it deletes this packet (i.e. it does not
transmit this packet over the network). The
default value is 'nrz'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.1.1.6 |
fclSdlcLpLogicalLinkProtocolThe value of this object indicates which transport
protocol is used over the network. QLLC (...) or
PSH (...) may be used. The default value is 'qllc'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.1.1.7 |
fclSdlcLpPacketSizeThe value of this object indicates the packet size
used across the network. When PSH is used as
transport protocol the packet size must be 128 or
256 octets. The default value is 128 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.1.1.8 |
fclSdlcLpWindowSizeThe value of this object indicates the window size
used across the network. The authorized values are
'1..7'. The default value is '7'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.15.1.1.9 |
fclSdlcLpCompressionThe value of this object indicates the compression
enabling for each direction. The authorized values
are :
off : no compression,
networkToSubscriber : compression of the flow
from the remote peer to the equipment,
subscriberToNetwork : compression of the flow
from the equipment to the remote peer,
bothway : compression of the two flows from and
to the equipment.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.1.1.20 |
fclSdlcLpCompressNegotiationThe value of this object indicates whether the
compression facility is negociated or not and, if
negociated, the optional/obligatory status. The
authorized values are :
off' :no negociation,
onOptionalCompression : negociation but
compression is optional,
onMandatoryCompression : negociation and
compression is mandatory.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.1.1.21 |
fclSdlcLpCompressScramblingThe value of this object indicates, when the
compression is active, whether the scrambling is
enabled or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.1.1.22 |
fclSdlcLpCompressMultiPacketsTimerThe value of this object defines the maximum
waiting time, in milliseconds by steps of 100
milliseconds , which, if there is not another
packet to compress, the packet of compressed
packets is sent beyond (this permits to reduce the
number of packets transmitted to the remote peer).
The authorized values are '0..1500'. '0' means no
packets grouping (i. e. : each packet is
individually compressed and sent). The default
value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.15.1.1.23 |
fclSdlcLpReliableVcThe value of this object is used to enable the
Reliable Virtual Circuit service. The authorized
values are :
off : no RVC, the VCs are considered as normal
VCs, no particular processing,
clear : RVCs are not allowed for the
subscriber, each attempt to establish a
RVC provokes a clear of the connection,
subscribe : all calls transmitted by the
subscriber establish RVCs, it is also
possible to receive calls with RVC option,
check :
for a link to a subscriber : when a call with
RVC option is received, a RVC is
established
for a link to a network : the RVC option is
ignored when it is present in a call sent
by a local subscriber, the connection is
cleared when the RVC option is present in
a call sent by the network.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.1.1.24 |
fclSdlcLpCosCOSrw Enumeration .1.3.6.1.4.1.866.20.1.20.15.1.1.30 |
fclSdlcLpCirEntrant CIRrw INTEGER .1.3.6.1.4.1.866.20.1.20.15.1.1.31 |
fclSdlcLpMinCirEntrant CIR minirw INTEGER .1.3.6.1.4.1.866.20.1.20.15.1.1.32 |
fclSdlcLpBeEntrant BErw INTEGER .1.3.6.1.4.1.866.20.1.20.15.1.1.33 |
fclSdlcPrimaryPuLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.15.2 |
fclSdlcPriLogPortTableThis table defines the parameters of SDLC access
logical ports which are in front of primaries
Physical Units. SEQUENCE OF FclSdlcPriLogPortEntry .1.3.6.1.4.1.866.20.1.20.15.2.1 |
fclSdlcPriLogPortEntryAn entry of fclSdlcPriLogPortTable. FclSdlcPriLogPortEntry .1.3.6.1.4.1.866.20.1.20.15.2.1.1 |
fclSdlcPriLpLogPortIdThe value of this object identifies one and only
one SDLC access logical port which is in front of
primaries Physical Units. The possible values are
: '0..131'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.15.2.1.1.1 |
fclSdlcPriLpLinkTypeThe value of this object indicates which kind of
link is estblished over the network. In this
description the primary PU in front of this
logical port is said 'local', the secondary PU on
the other side of the network is said 'remote'.
The values are expressed with the format
'local-remote' :
pu4-pu4 : PU 4 to PU 4,
pu4-pu21 PU 4 to PU 2.1,
pu4-pu20 : PU 4 to PU 2.0,
pu21-pu21 : PU 2.1 to PU 2.1,
nixd-pu20 : Nixdorf PU to PU 2.0,
rwsi-pu20 : RWSI to PU 2.0.
The default value is 'pu4-pu20'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.2.1.1.2 |
fclSdlcPriLpRemPuIdentificationThe value of this object indicates whether the
remote secondary PU is identified by a proprietary
way or by using the called address field of call
packets.
The default value is 'proprietary'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.2.1.1.3 |
fclSdlcPriLpPollingGroupResponseThe value of this object indicates whether the
equipment answers to the polling group when this
feature is used by the local primary PU as a
normal secondary PU should do. The address used by
this polling group is defined in
fclSdlcPriLpPollingGroupAddress.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.2.1.1.4 |
fclSdlcPriLpPollingGroupAddressThe value of this object defines the address used
by the polling group (if the equipment must answer
according to fclSdlcPriLpPollingGroupResponse).
The value must contain 2 digits (digits 0..F).
The default value is 'FF'.rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.15.2.1.1.5 |
fclSdlcPriClusterTable SEQUENCE OF FclSdlcPriClusterEntry .1.3.6.1.4.1.866.20.1.20.15.2.2 |
fclSdlcPriClusterEntryAn entry of fclSdlcPriClusterTable. FclSdlcPriClusterEntry .1.3.6.1.4.1.866.20.1.20.15.2.2.1 |
fclSdlcPriClusterLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.15.2.2.1.1 |
fclSdlcPriClusterAddressAdresse du clusterro OCTET STRING .1.3.6.1.4.1.866.20.1.20.15.2.2.1.2 |
fclSdlcPriClusterStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.15.2.2.1.3 |
fclSdlcPriClusterRemPu2CalledAddrAdresse X121 si identification PU2 distant par
adresse appeleerw OCTET STRING .1.3.6.1.4.1.866.20.1.20.15.2.2.1.5 |
fclSdlcSecondaryPuLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.15.3 |
fclSdlcSecLogPortTable SEQUENCE OF FclSdlcSecLogPortEntry .1.3.6.1.4.1.866.20.1.20.15.3.1 |
fclSdlcSecLogPortEntryAn entry of fclSdlcSecLogPortTable. FclSdlcSecLogPortEntry .1.3.6.1.4.1.866.20.1.20.15.3.1.1 |
fclSdlcSecLpLogPortIdThe value of this object identifies one and only
one SDLC access logical port which is in front of
primaries Physical Units. The possible values are
: '0..131'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.15.3.1.1.1 |
fclSdlcSecLpLinkTypeThe value of this object indicates which kind of
link is estblished over the network. In this
description the secondary PU in front of this
logical port is said 'local', the primary PU on
the other side of the network is said 'remote'.
The values are expressed with the format
'local-remote' :
pu4-pu4 : PU 4 to PU 4,
pu21-pu4 PU 2.1 to PU 4,
pu21-pu21 : PU 2.1 to PU 2.1,
pu20-pu4 : PU 2.0 to PU 4,
pu20-nixd : PU 2.0 to Nixdorf PU,
pu20-rwsi : PU 2.0 to RWSI.
terminal to pu4.
The default value is 'pu20-pu4'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.3.1.1.2 |
fclSdlcSecLpRemPuIdentificationThe value of this object indicates whether the
remote secondary PU is identified by a proprietary
way or by using the called address field of call
packets.
The default value is 'proprietary'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.3.1.1.3 |
fclSdlcSecLpT1AcknowledgeTimerT1 Reply timer. A SDLC link-station uses T1 to
detect a failure to receive a required
acknowlegment or response. T1 runs when there are
acknowlegments outstanding, it is reset when
acknowlegments are received.rw INTEGER .1.3.6.1.4.1.866.20.1.20.15.3.1.1.4 |
fclSdlcSecLpN2RetryCountThe maximum number of transmissions. If the reply
timer expires for whatever reason, an S-frame with
poll bit set is sent to sollicit a response from
remote SDLC link-station. If there is still no
response after N2 retry, the link is deemed to be
inoperative.rw INTEGER .1.3.6.1.4.1.866.20.1.20.15.3.1.1.5 |
fclSdlcSecLpCallRetryCountThe maximum number of calls. If the call confirm
is not received, the network layer will repeat a
call packet. If there is still no response after n
calls, the network layer will then start a slow
call.rw INTEGER .1.3.6.1.4.1.866.20.1.20.15.3.1.1.6 |
fclSdlcSecLpPollingTimerTimer between two polling of all stations in a
list.rw INTEGER .1.3.6.1.4.1.866.20.1.20.15.3.1.1.10 |
fclSdlcSecLpPollingMaxCountNumber of polling counts before to poll the
station with SNRMrw INTEGER .1.3.6.1.4.1.866.20.1.20.15.3.1.1.11 |
fclSdlcSecClusterTable SEQUENCE OF FclSdlcSecClusterEntry .1.3.6.1.4.1.866.20.1.20.15.3.2 |
fclSdlcSecClusterEntryAn entry of fclSdlcSecClusterTable. FclSdlcSecClusterEntry .1.3.6.1.4.1.866.20.1.20.15.3.2.1 |
fclSdlcSecClusterLogPortIdThe value of this object identifies one and only
one SDLC access logical port which is in front of
primaries Physical Units. The possible values are
: '0..131'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.15.3.2.1.1 |
fclSdlcSecClusterAddressThis is the poll address of the controller. You
must make sure this address matches the one
assignedto the attached controller. Range is '01
to FF'ro OCTET STRING .1.3.6.1.4.1.866.20.1.20.15.3.2.1.2 |
fclSdlcSecClusterStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.15.3.2.1.3 |
fclSdlcSecClusterCalledAddrCalled X121 address. X121 Address of the
corresponding Hpad element.rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.15.3.2.1.5 |
fclSdlcSecClusterFacilityThe value of this object indicates the X25 call
packet facility. The possible values are :
none : no facility in the call packet,
reverseCharging : Reverse Charging,
cug : Closed User Group,
reverseCharging -cug : Closed User Group,
Reverse Charging.
The default value is 'none'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.15.3.2.1.6 |
fclSdlcSecClusterFacThroughputClassThroughput Classrw Enumeration .1.3.6.1.4.1.866.20.1.20.15.3.2.1.7 |
fclSdlcSecClusterMinRecallTimerSlow call timerrw INTEGER .1.3.6.1.4.1.866.20.1.20.15.3.2.1.10 |
fclSdlcSecClusterRemPvcLogChannelPVC numberrw INTEGER .1.3.6.1.4.1.866.20.1.20.15.3.2.1.11 |
fclSdlcSecClusterXidStringResponseThis field enables you to assign a PU XID. The
unit uses XID's to establish and negociate PU
application session. If the PU cannot respond to
an XID request from the Host, the unit uses this
assigned XID value.rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.15.3.2.1.12 |
fclSdlcSecClusterCosCOS Class Of Service VBRrw Enumeration .1.3.6.1.4.1.866.20.1.20.15.3.2.1.20 |
fclSdlcSecClusterCirCIR Committed information Rate is the maximum
number of bits per seconds which an end station
can transmit into the network . This is the access
rate of the user-network interface and it is
limited by the line speed of the user-network
connection and established by subscription.rw INTEGER .1.3.6.1.4.1.866.20.1.20.15.3.2.1.21 |
fclSdlcSecClusterCirminCIRmin If the end station is informed about the
congestion of the network, this is the minimum CIR
that the end station can transmit into the network.rw INTEGER .1.3.6.1.4.1.866.20.1.20.15.3.2.1.22 |
fclSdlcSecClusterBcBc The Committed Burst Size is a measure for the
volume of data for which the network will garantee
message delivery under normal conditions. It is
measured during the committed rate measurement
interval (Tc).rw INTEGER .1.3.6.1.4.1.866.20.1.20.15.3.2.1.23 |
fclSdlcSecClusterBeBe The Excess Burst Size is the maximum amount of
uncommitted data in access of Bc that the network
will attemp to deliver during a time interval
(Tc). End stations are allowed to transmit data in
excess of the committed burst rate.rw INTEGER .1.3.6.1.4.1.866.20.1.20.15.3.2.1.24 |
fclVipLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.16 |
fclVipLogPortTableThis table defines the general parameters of VIP
(Visual Information Projection) access logical
ports. These VIP logical ports are used in
HONEYWELL -BULL systems to cross X25 or Frame
Relay networks SEQUENCE OF FclVipLogPortEntry .1.3.6.1.4.1.866.20.1.20.16.1 |
fclVipLogPortEntryAn entry of fclVipLogPortTable. FclVipLogPortEntry .1.3.6.1.4.1.866.20.1.20.16.1.1 |
fclVipLpLogPortIdThe value of this object identifies one and only
one VIP(Visual Information Projection) access
logical port in BULL network architecture. The
possible values are : '0..131'. If it is unused,
the value of this parameter is '255'. The default
value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.16.1.1.1 |
fclVipLpInterfaceIdThe value of this object identifies the line
interface used by this VIP logical port. The
possible values are : '0..35'. If it is unused,
the value of this parameter is '255'. The default
value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.16.1.1.2 |
fclVipLpEmulationTypeThe value of this object indicates the type of
unit which are in front of this VIP logical port.
The unit may be 'Host' or 'Cluster'. Host units
poll cluster units in a predetermined order and
then clusters transmit if they have outgoing data.
The COMPAC equipment acts as a Cluster in front of
a host(HPAD emulation) and, on the other side, it
acts as a host in front of a cluster(TPAD
emulation). The TPAD always originates the link
circuit request .The HPAD is waiting for the link
circuit indication.
The default value is 'HPAD'(so the equipment acts
as Cluster).rw Enumeration .1.3.6.1.4.1.866.20.1.20.16.1.1.3 |
fclVipLpResponseSurveyPollingTimerSupervision line watchdog. If this timeout
matures, the line is considered as beeing out of
order.
The default value is 300ms.rw INTEGER .1.3.6.1.4.1.866.20.1.20.16.1.1.8 |
fclVipLpScreenRetryTimerValue of screen message transmission Time Out.
The default value is '10' srw INTEGER .1.3.6.1.4.1.866.20.1.20.16.1.1.9 |
fclVipLpPrinterRetryTimerValue of printer message retransmission Time Out.
The default value is '70' srw INTEGER .1.3.6.1.4.1.866.20.1.20.16.1.1.10 |
fclVipLpMessageRetryNumberNumber of message retransmissions.
The default value is '5'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.16.1.1.11 |
fclVipLpPrinterMessagesManagement'Local management' or 'transparency'of printer
messages.
Local management
It is the standard functionning. When a printer
message is received from the HOST , it is
not immediateley aknowledged by the COMPAC
HPAD.It will be acknowledged when the
fclVipLpHosPrinterRetryTimer time out
elapses.
Transparency.
It is an end to end aknowlegement, the printer
aknowlege is conveyed through the
network(transparency).
The default value is 'local management'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.16.1.1.12 |
fclVipHostPadLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.16.2 |
fclVipHosLogPortTableThis table defines the parameters of VIP access
logical ports which are in front of Host Units SEQUENCE OF FclVipHosLogPortEntry .1.3.6.1.4.1.866.20.1.20.16.2.1 |
fclVipHosLogPortEntryAn entry of fclVipHosLogPortTable. FclVipHosLogPortEntry .1.3.6.1.4.1.866.20.1.20.16.2.1.1 |
fclVipHosLpLogPortIdThe value of this object identifies one and only
one VIP access logical port which is in front of
a HOST. The possible values are : '0..131'. If it
is unused, the value of this parameter is '255'.
The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.16.2.1.1.1 |
fclVipHosLpWaitTimeOutForPrinterValue of inter-polling time-out for printer.
The default value is '300' ms.rw INTEGER .1.3.6.1.4.1.866.20.1.20.16.2.1.1.2 |
fclVipHosLpRepAEotEOT response or not from the HPAD on polls of the
HOST and in case the virtual circuit with the TPAD
has not been established.
The default value is 'EOT response on the polls'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.16.2.1.1.5 |
fclVipHosLpFtbccSpecial treatment or not for the 'PENQ (printer
Enquiry)sequence'(seen with customer FTBCC ITALY).
The default value is 'no special treatement'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.16.2.1.1.6 |
fclVipHosElementTable SEQUENCE OF FclVipHosElementEntry .1.3.6.1.4.1.866.20.1.20.16.2.2 |
fclVipHosElementEntryAn entry of fclVipHosElementTable. FclVipHosElementEntry .1.3.6.1.4.1.866.20.1.20.16.2.2.1 |
fclVipHosElementIdIdent Element. The value of this object identifies
one identificable addressable entity.
The possible values are : '0..200'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.16.2.2.1.1 |
fclVipHosElemStatusStatus.rw Enumeration .1.3.6.1.4.1.866.20.1.20.16.2.2.1.2 |
fclVipHosElemLogPortIdLpId. Logical Port Identifier.rw INTEGER .1.3.6.1.4.1.866.20.1.20.16.2.2.1.3 |
fclVipHosElemTypeElement Type. Cluster or Isolated Station.rw Enumeration .1.3.6.1.4.1.866.20.1.20.16.2.2.1.4 |
fclVipHosElemAddressElement Address. Vip Address of The Entity
Between '0' and '31'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.16.2.2.1.5 |
fclVipHosStationTable SEQUENCE OF FclVipHosStationEntry .1.3.6.1.4.1.866.20.1.20.16.2.3 |
fclVipHosStationEntryAn entry of fclVipHosStationTable. FclVipHosStationEntry .1.3.6.1.4.1.866.20.1.20.16.2.3.1 |
fclVipHosStatElementIdIdent Element.The value of this object identifies
one identificable addressable entity.
The possible values are : '0..200'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.16.2.3.1.1 |
fclVipHosStatStationAddressStation Address. Vip Address of the cluster
defined in the previous table (case when element
type=Cluster).ro INTEGER .1.3.6.1.4.1.866.20.1.20.16.2.3.1.2 |
fclVipHosStatStatusStatus.rw Enumeration .1.3.6.1.4.1.866.20.1.20.16.2.3.1.3 |
fclVipClusterLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.16.3 |
fclVipCluLogPortTableThis table defines the parameters of VIP access
logical ports which are in front of Cluster Units SEQUENCE OF FclVipCluLogPortEntry .1.3.6.1.4.1.866.20.1.20.16.3.1 |
fclVipCluLogPortEntryAn entry of fclVipCluLogPortTable. FclVipCluLogPortEntry .1.3.6.1.4.1.866.20.1.20.16.3.1.1 |
fclVipCluLpLogPortIdThe value of this object identifies one and only
one VIP access logical port which is in front of
a HOST. The possible values are : '0..131'. If it
is unused, the value of this parameter is '255'.
The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.16.3.1.1.1 |
fclVipCluLpPollingTimerValue of interpolling wait time-out
(retransmission of polling frame on expiry of time
out).rw INTEGER .1.3.6.1.4.1.866.20.1.20.16.3.1.1.2 |
fclVipCluLpFailedPollingMaxNumberMaximum number of unanswered polls
The default value is '6'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.16.3.1.1.3 |
fclVipCluLpPollingTypeAfterSelectPolling Type after select
Station polling. After a select the Tpad sends a
station poll in order to directly receive from it
an immediate aknowledgement .
Cluster polling. After a select , the Tpad sends a
cluster select. Although less efficient it is
sometimes used in certain configurations.
The default value is 'station poll'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.16.3.1.1.8 |
fclVipCluLpScreenKeepTimerScreen message Blocking
Duration of the blocking of the screen flow .After
reception of a screen message , transmitted by a
VIP station ,the message flow from that station
to the screen is blocked .The station is released
when a screen message is received from the Host or
when the protection time-out expires.
The default value is no blocking.rw INTEGER .1.3.6.1.4.1.866.20.1.20.16.3.1.1.9 |
fclVipCluElementTable SEQUENCE OF FclVipCluElementEntry .1.3.6.1.4.1.866.20.1.20.16.3.2 |
fclVipCluElementEntryAn entry of fclVipCluElementTable. FclVipCluElementEntry .1.3.6.1.4.1.866.20.1.20.16.3.2.1 |
fclVipCluElementIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.16.3.2.1.1 |
fclVipCluElemStatusStatus.rw Enumeration .1.3.6.1.4.1.866.20.1.20.16.3.2.1.2 |
fclVipCluElemLogPortIdLpId. Logical Port Identifierrw INTEGER .1.3.6.1.4.1.866.20.1.20.16.3.2.1.3 |
fclVipCluElemTypeElement Type. Cluster or Isolated Station.rw Enumeration .1.3.6.1.4.1.866.20.1.20.16.3.2.1.4 |
fclVipCluElemAddressElement Address. Vip Adress of the Entity between
'0' and '31'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.16.3.2.1.5 |
fclVipCluElemCalledAddrCalled X121 address. X121 Address of the
corresponding Hpad element.rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.16.3.2.1.10 |
fclVipCluElemMinRecallTimerCall Retransmission timing value. If a call fails,
this timer is started. When it matures, an other
call is made.rw INTEGER .1.3.6.1.4.1.866.20.1.20.16.3.2.1.11 |
fclVipCluStationTable SEQUENCE OF FclVipCluStationEntry .1.3.6.1.4.1.866.20.1.20.16.3.3 |
fclVipCluStationEntryAn entry of fclVipCluStationTable. FclVipCluStationEntry .1.3.6.1.4.1.866.20.1.20.16.3.3.1 |
fclVipCluStatElementIdIdent Element. The value of this objetc identifies
one identifiable and addressable entity.
The possible values are : '0..200'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.16.3.3.1.1 |
fclVipCluStatStationAddressStation Address. Vip adress of the cluster defined
in the previuos table (case when element
type=cluster).ro INTEGER .1.3.6.1.4.1.866.20.1.20.16.3.3.1.2 |
fclVipCluStatStatusStatus.rw Enumeration .1.3.6.1.4.1.866.20.1.20.16.3.3.1.3 |
fclBsc3270LogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.17 |
fclB3270LogPortTable SEQUENCE OF FclB3270LogPortEntry .1.3.6.1.4.1.866.20.1.20.17.1 |
fclB3270LogPortEntryAn entry of fclB3270LogPortTable. FclB3270LogPortEntry .1.3.6.1.4.1.866.20.1.20.17.1.1 |
fclB3270LpLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.17.1.1.1 |
fclB3270LpInterfaceIdIF Id (type ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.17.1.1.2 |
fclB3270LpEmulationTypeType d'emulationrw Enumeration .1.3.6.1.4.1.866.20.1.20.17.1.1.3 |
fclB3270LpCodingParityTypeType de codage pariterw Enumeration .1.3.6.1.4.1.866.20.1.20.17.1.1.4 |
fclB3270LpNoAnswerWatchDogTemporisation de non reponserw INTEGER .1.3.6.1.4.1.866.20.1.20.17.1.1.5 |
fclB3270LpMessageRetryNumberNombre de reemission de messagerw INTEGER .1.3.6.1.4.1.866.20.1.20.17.1.1.6 |
fclB3270HostPadLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.17.2 |
fclB3270HosLogPortTable SEQUENCE OF FclB3270HosLogPortEntry .1.3.6.1.4.1.866.20.1.20.17.2.1 |
fclB3270HosLogPortEntryAn entry of fclB3270HosLogPortTable. FclB3270HosLogPortEntry .1.3.6.1.4.1.866.20.1.20.17.2.1.1 |
fclB3270HosLpLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.17.2.1.1.1 |
fclB3270HosLpLineWatchDogTempo de surveillance de lignerw INTEGER .1.3.6.1.4.1.866.20.1.20.17.2.1.1.2 |
fclB3270HosLpWackTransmissionEmission WACKrw Enumeration .1.3.6.1.4.1.866.20.1.20.17.2.1.1.3 |
fclB3270HosLpAnswerToPollingReponse au poll systematiquerw Enumeration .1.3.6.1.4.1.866.20.1.20.17.2.1.1.4 |
fclB3270HosClusterTable SEQUENCE OF FclB3270HosClusterEntry .1.3.6.1.4.1.866.20.1.20.17.2.2 |
fclB3270HosClusterEntryAn entry of fclB3270HosClusterTable. FclB3270HosClusterEntry .1.3.6.1.4.1.866.20.1.20.17.2.2.1 |
fclB3270HosClusterLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.17.2.2.1.1 |
fclB3270HosClusterCluAddAdresse du clusterro INTEGER .1.3.6.1.4.1.866.20.1.20.17.2.2.1.2 |
fclB3270HosClusterStaAddAdresse stationrw INTEGER .1.3.6.1.4.1.866.20.1.20.17.2.2.1.3 |
fclB3270HosClusterStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.17.2.2.1.4 |
fclB3270ClusterLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.17.3 |
fclB3270CluLogPortTable SEQUENCE OF FclB3270CluLogPortEntry .1.3.6.1.4.1.866.20.1.20.17.3.1 |
fclB3270CluLogPortEntryAn entry of fclB3270CluLogPortTable. FclB3270CluLogPortEntry .1.3.6.1.4.1.866.20.1.20.17.3.1.1 |
fclB3270CluLpLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.17.3.1.1.1 |
fclB3270CluLpPollingTimerTemporisation d'interpollingrw INTEGER .1.3.6.1.4.1.866.20.1.20.17.3.1.1.10 |
fclB3270CluLpMaxNumberOfUnwPollsNombre maximum de non reponse au pollingrw INTEGER .1.3.6.1.4.1.866.20.1.20.17.3.1.1.11 |
fclB3270CluLpReconnectionTypeType de reconnexionrw Enumeration .1.3.6.1.4.1.866.20.1.20.17.3.1.1.12 |
fclB3270CluClusterTable SEQUENCE OF FclB3270CluClusterEntry .1.3.6.1.4.1.866.20.1.20.17.3.2 |
fclB3270CluClusterEntryAn entry of fclB3270CluClusterTable. FclB3270CluClusterEntry .1.3.6.1.4.1.866.20.1.20.17.3.2.1 |
fclB3270CluClusterLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.17.3.2.1.1 |
fclB3270CluClusterCluAddAdresse du clusterro INTEGER .1.3.6.1.4.1.866.20.1.20.17.3.2.1.2 |
fclB3270CluClusterStaAddAdresse stationrw INTEGER .1.3.6.1.4.1.866.20.1.20.17.3.2.1.3 |
fclB3270CluClusterStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.17.3.2.1.4 |
fclB3270CluCallTable SEQUENCE OF FclB3270CluCallEntry .1.3.6.1.4.1.866.20.1.20.17.3.3 |
fclB3270CluCallEntryAn entry of fclB3270CluCallTable. FclB3270CluCallEntry .1.3.6.1.4.1.866.20.1.20.17.3.3.1 |
fclB3270CluCallLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.17.3.3.1.1 |
fclB3270CluCallCluAddAdresse du clusterro INTEGER .1.3.6.1.4.1.866.20.1.20.17.3.3.1.2 |
fclB3270CluCallStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.17.3.3.1.3 |
fclB3270CluCallCallAddrAdresse X121 appeleerw OCTET STRING .1.3.6.1.4.1.866.20.1.20.17.3.3.1.5 |
fclB3270CluCallMinRecallTimerTempo de retransmission d'appelrw INTEGER .1.3.6.1.4.1.866.20.1.20.17.3.3.1.10 |
fclBscX780LogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.18 |
fclBX780LogPortTable SEQUENCE OF FclBX780LogPortEntry .1.3.6.1.4.1.866.20.1.20.18.1 |
fclBX780LogPortEntryAn entry of fclBX780LogPortTable. FclBX780LogPortEntry .1.3.6.1.4.1.866.20.1.20.18.1.1 |
fclBX780LpLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.18.1.1.1 |
fclBX780LpInterfaceIdIF Id (type ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.18.1.1.2 |
fclBX780LpProtocolTypeType de BSCrw Enumeration .1.3.6.1.4.1.866.20.1.20.18.1.1.3 |
fclBX780LpCallDirectionMode d'appelrw Enumeration .1.3.6.1.4.1.866.20.1.20.18.1.1.4 |
fclBX780LpDeconnectTimerTempo de deconnexionrw INTEGER .1.3.6.1.4.1.866.20.1.20.18.1.1.5 |
fclBX780LpSurveyTimerTempo de surveillancerw INTEGER .1.3.6.1.4.1.866.20.1.20.18.1.1.6 |
fclBX780LpCodingParityTypeType de codage pariterw Enumeration .1.3.6.1.4.1.866.20.1.20.18.1.1.7 |
fclBX780LpEquipementTypeType de couplerw Enumeration .1.3.6.1.4.1.866.20.1.20.18.1.1.8 |
fclBX780LpENQRetransTimerTempo de retransmission du ENQrw INTEGER .1.3.6.1.4.1.866.20.1.20.18.1.1.9 |
fclBX780LpAuthorAnswerTimerTempo de reponse auteurrw INTEGER .1.3.6.1.4.1.866.20.1.20.18.1.1.10 |
fclBX780LpNoAnswerWatchDogTemporisation de non reponserw INTEGER .1.3.6.1.4.1.866.20.1.20.18.1.1.11 |
fclBX780LpMessageRetryNumberNombre de reemission de messagerw INTEGER .1.3.6.1.4.1.866.20.1.20.18.1.1.12 |
fclBX780ConnectionTable SEQUENCE OF FclBX780ConnectionEntry .1.3.6.1.4.1.866.20.1.20.18.2 |
fclBX780ConnectionEntryAn entry of fclBX780ConnectionTable. FclBX780ConnectionEntry .1.3.6.1.4.1.866.20.1.20.18.2.1 |
fclBX780ConnLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.18.2.1.1 |
fclBX780ConnCalledAddrWAN adresse appeleerw OCTET STRING .1.3.6.1.4.1.866.20.1.20.18.2.1.2 |
fclBX780ConnMinimumRecallTimerTempo de retransmission d'appelrw INTEGER .1.3.6.1.4.1.866.20.1.20.18.2.1.3 |
fclBX780IdentTable SEQUENCE OF FclBX780IdentEntry .1.3.6.1.4.1.866.20.1.20.18.3 |
fclBX780IdentEntryAn entry of fclBX780IdentTable. FclBX780IdentEntry .1.3.6.1.4.1.866.20.1.20.18.3.1 |
fclBX780IdentLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.18.3.1.1 |
fclBX780IdentTermIdIdent du terminalro OCTET STRING .1.3.6.1.4.1.866.20.1.20.18.3.1.2 |
fclBX780IdentStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.18.3.1.3 |
fclBscSctLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.19 |
fclBSctLogPortTable SEQUENCE OF FclBSctLogPortEntry .1.3.6.1.4.1.866.20.1.20.19.1 |
fclBSctLogPortEntryAn entry of fclBSctLogPortTable. FclBSctLogPortEntry .1.3.6.1.4.1.866.20.1.20.19.1.1 |
fclBSctLpLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.19.1.1.1 |
fclBSctLpInterfaceIdIF Id (type ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.19.1.1.2 |
fclBSctLpLinkTypeType de liaisonrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.1.1.3 |
fclBSctLpNumberOfSYNNombre de SYN avant la tramerw Enumeration .1.3.6.1.4.1.866.20.1.20.19.1.1.4 |
fclBSctLpSignalEnvelopeEnveloppe de tramerw Enumeration .1.3.6.1.4.1.866.20.1.20.19.1.1.5 |
fclBSctLpCodingParityTypeType de codage pariterw Enumeration .1.3.6.1.4.1.866.20.1.20.19.1.1.6 |
fclBSctLpMaxFrameNumberInNombre de trame acceptee en entreerw INTEGER .1.3.6.1.4.1.866.20.1.20.19.1.1.7 |
fclBSctLpUnderrunManagementGestion de l underrunrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.1.1.8 |
fclBSctLpOnePadSuppressedSuppression d un padrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.1.1.9 |
fclBSctConnectionTable SEQUENCE OF FclBSctConnectionEntry .1.3.6.1.4.1.866.20.1.20.19.2 |
fclBSctConnectionEntryAn entry of fclBSctConnectionTable. FclBSctConnectionEntry .1.3.6.1.4.1.866.20.1.20.19.2.1 |
fclBSctConnLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.19.2.1.1 |
fclBSctConnCalledAddrWAN adresse appelerw OCTET STRING .1.3.6.1.4.1.866.20.1.20.19.2.1.2 |
fclBSctConnCallDirectionMode d appelrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.2.1.3 |
fclBSctConnSubscriberNumberNumero d'abonnerw INTEGER .1.3.6.1.4.1.866.20.1.20.19.2.1.4 |
fclBSctConnMinimumRecallTimerTempo de retransmission d'appelrw INTEGER .1.3.6.1.4.1.866.20.1.20.19.2.1.5 |
fclBSctProtocolDefinition1Table SEQUENCE OF FclBSctProtocolDefinition1Entry .1.3.6.1.4.1.866.20.1.20.19.3 |
fclBSctProtocolDefinition1EntryAn entry of fclBSctProtocolDefinition1Table. FclBSctProtocolDefinition1Entry .1.3.6.1.4.1.866.20.1.20.19.3.1 |
fclBSctProtDef1LogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.19.3.1.1 |
fclBSctProtDef1PermanentDelimiter11 e Delimiteur Permanentrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.3.1.2 |
fclBSctProtDef1PermanentDelimiter22 e Delimiteur Permanentrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.3.1.3 |
fclBSctProtDef1PermanentDelimiter33 e Delimiteur Permanentrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.3.1.4 |
fclBSctProtDef1PermanentDelimiter44 e Delimiteur Permanentrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.3.1.5 |
fclBSctProtDef1PermanentDelimiter55 e Delimiteur Permanentrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.3.1.6 |
fclBSctProtDef1StartFrameDelimiter11 e delimiteur de debut de tramerw Enumeration .1.3.6.1.4.1.866.20.1.20.19.3.1.7 |
fclBSctProtDef1StartFrameDelimiter22 e delimiteur de debut de tramerw Enumeration .1.3.6.1.4.1.866.20.1.20.19.3.1.8 |
fclBSctProtDef1StartFrameDelimiter33 e delimiteur de debut de tramerw Enumeration .1.3.6.1.4.1.866.20.1.20.19.3.1.9 |
fclBSctProtDef1NbCharInhibitednombre de caracteres a iniberrw INTEGER .1.3.6.1.4.1.866.20.1.20.19.3.1.10 |
fclBSctProtDef1StFrDelimiterInhib11 e delimiteur de debut de trame avec inibitionrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.3.1.11 |
fclBSctProtDef1StFrDelimiterInhib22 e delimiteur de debut de trame avec inibitionrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.3.1.12 |
fclBSctProtocolDefinition2Table SEQUENCE OF FclBSctProtocolDefinition2Entry .1.3.6.1.4.1.866.20.1.20.19.4 |
fclBSctProtocolDefinition2EntryAn entry of fclBSctProtocolDefinition2Table. FclBSctProtocolDefinition2Entry .1.3.6.1.4.1.866.20.1.20.19.4.1 |
fclBSctProtDef2LogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.19.4.1.1 |
fclBSctProtDef2DataFrameTerminator11 e Terminateur de trame de donneesrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.4.1.2 |
fclBSctProtDef2DataFrameTerminator22 e Terminateur de trame de donneesrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.4.1.3 |
fclBSctProtDef2DataFrameTerminator33 e Terminateur de trame de donneesrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.4.1.4 |
fclBSctProtDef2ControlFrameTerminator11 e Terminateur de trame de controlerw Enumeration .1.3.6.1.4.1.866.20.1.20.19.4.1.5 |
fclBSctProtDef2ControlFrameTerminator22 e Terminateur de trame de controlerw Enumeration .1.3.6.1.4.1.866.20.1.20.19.4.1.6 |
fclBSctProtDef2ACK0ACK0rw Enumeration .1.3.6.1.4.1.866.20.1.20.19.4.1.7 |
fclBSctProtDef2ACK1ACK1rw Enumeration .1.3.6.1.4.1.866.20.1.20.19.4.1.8 |
fclBSctProtDef2WACKWACKrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.4.1.9 |
fclBSctProtDef2RVIRVIrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.4.1.10 |
fclBSctProtDef2WABTWABTrw Enumeration .1.3.6.1.4.1.866.20.1.20.19.4.1.11 |
fclX25SlpAccess OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.20 |
fclX25SlpAccessTableThis table defines the general parameters of X25
SLP (Single Link Protocol) access logical ports. SEQUENCE OF FclX25SlpAccessEntry .1.3.6.1.4.1.866.20.1.20.20.1 |
fclX25SlpAccessEntryAn entry of fclX25SlpAccessTable. FclX25SlpAccessEntry .1.3.6.1.4.1.866.20.1.20.20.1.1 |
fclX25AccLogPortIdThe value of this object identifies one and only
one X25 SLP (Single Link Protocol) access logical
port. The possible values are : '0..131'. If it is
unused, the value of this parameter is '255'. The
default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.20.1.1.1 |
fclX25AccInterfaceIdThe value of this object identifies the line
interface used by this X25 access logical port.
The possible values are : '0..35'. If it is
unused, the value of this parameter is '255'. The
default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.20.1.1.2 |
fclX25AccConnectionTypeThe value of this object indicates which is the
system connected to this X25 access logical port.
The possible values are :
subscriber : this X25 access logical port
logical port is facing to a X25
subscriber, fclX25AccSubscriberNumber is
used, fclX25AccPdnLinkAddress is not used,
publicNetwork : this logical port is facing to
a X25 Public Data Network,
fclX25AccSubscriberNumber is not used,
fclX25AccPdnLinkAddress is used.
The default value is 'subscriber'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.20.1.1.3 |
fclX25AccSubscriberNumberThe value of this object is the SB number added to
the DNICZO of the equipment to make the calling
address in a call sent from this X25 access
logical port (if fclX25AccConnectionType is set to
'subscriber'). The value must contain 2 digits
(digits 0..9). The default value is 'FF'.rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.20.1.1.4 |
fclX25AccPdnLinkAddressThe value of this object is the X121 address of
the equipment on the connected network (if
fclX25AccConnectionType is set to
'publicNetwork'). The value may contain up to 15
digits (digits 0..9). The value must be completed
with 'F' digits for a total of 16 digits. The
equipment configurator does not need final
completion. The default value is 'FF FF FF FF FF
FF FF FF' meaning 'empty value' (blank value on
the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.20.1.1.5 |
fclX25AccX25AccessConfigIdThe value of this object identifies the X25 access
configuration used by this X25 access logical
port. This X25 access configuration must be
present in fclX25ConfigAccessTable. The possible
values are : '0..199. If it is unused, the value
of this parameter is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.20.1.1.6 |
fclX25AccIsdnBackupEnablingSecours RNISrw Enumeration .1.3.6.1.4.1.866.20.1.20.20.1.1.7 |
fclX25AccPstnBackupEnablingSecours RTCrw Enumeration .1.3.6.1.4.1.866.20.1.20.20.1.1.8 |
fclX25AccPrivateNetTableThis table defines the X25 access logical ports
for which some X25 call packet fields are saved in
X25 facility field. The restoration of these field
takes place on the other side of the network in a
symetric X25 SLP access logical port. SEQUENCE OF FclX25AccPrivateNetEntry .1.3.6.1.4.1.866.20.1.20.20.2 |
fclX25AccPrivateNetEntryAn entry of fclX25AccPrivateNetTable. FclX25AccPrivateNetEntry .1.3.6.1.4.1.866.20.1.20.20.2.1 |
fclX25AccPrivLogPortIdThe value of this object identifies one and only
one X25 access logical port.The possible values
are : '0..131'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.20.2.1.1 |
fclX25AccPrivX25FieldsSaveThe value of this object indicates which X25 call
packet fields are saved in X25 facility field for
this X25 access logical port. The save operation
is made on X25 call packets sent over the network
and the restore operation is made on X25 packets
received from the network. The possible values are
:
off : no save/restore procedure,
addr : called and calling addresses,
addrCug : called and calling addresses, Closed
User Group,
addrCugRc : called and calling addresses,
Closed User Group, Reverse Charging.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.20.2.1.2 |
fclX25AccPrivX25FieldsChangesThe value of this object describes X25 fields
modifications. The syntaxe is
<Modification>[value]. There are 3 possible
modifications :
BF : adds a facility at output,
DA : deletes caller's address at input,
CE : changes called party address.
Example : DA CE 90 40 21 80 BF 70 10 00,
DA deletes the calling address,
CE 90 40 21 80 changes the called address to
90402180,
BF 70 10 00 adds the facility 701000 at output
of switch.
25 bytes from 00 to FF must be specified. The
first byte contains the number of following useful
bytes. The trailing bytes must be set to 'FF'. The
equipment configurator does not need this final
completion.
The default value is 'empty' (first byte set to
'00').rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.20.2.1.3 |
fclX25AccPermanentVcTableThis table defines the X25 PVC (Permananent
Virtual Circuits) on X25 Access logical ports. For
each PVC this table defines the addres of the
called remote peer and the different parameters of
the call processing. SEQUENCE OF FclX25AccPermanentVcEntry .1.3.6.1.4.1.866.20.1.20.20.3 |
fclX25AccPermanentVcEntryAn entry of fclX25AccPermanentVcTable. FclX25AccPermanentVcEntry .1.3.6.1.4.1.866.20.1.20.20.3.1 |
fclX25AccPvcLogPortIdThe value of this object identifies one and only
one X25 Access logical port. This is the logical
port this PVC (Permanent Virtual Circuit) is
layered onto. The possible values are : '0..131'.
If it is unused, the value of this parameter is
'255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.20.3.1.1 |
fclX25AccPvcLocalLogChannelThe value of this object is equal to the logical
channel value for this PVC. The possible values
are '0..250'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.20.3.1.2 |
fclX25AccPvcStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.20.3.1.3 |
fclX25AccPvcCalledAddrThe value of this object is the X121 address of
the called remote peer PVC. This value is the
called address specified in the call packet sent
from this PVC. The value may contain up to 15
digits (digits 0..9). The value must be completed
with 'F' digits for a total of 16 digits. The
equipment configurator does not need final
completion. The default value is 'FF FF FF FF FF
FF FF FF' meaning 'empty value' (blank value on
the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.20.3.1.4 |
fclX25AccPvcRemoteLogChannelThe value of this object is equal to the logical
channel value for the remote peer PVC. The
possible values are '0..250'. The default value is
'255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.20.3.1.5 |
fclX25AccPvcMinimumRecallTimerThe value of this object specifies the minimum
recall time (in seconds) between two successive
calls. The authorized values are '0..990' by step
of 10. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.20.3.1.6 |
fclX25AccPvcCallDirectionThe value of this object defines the mode used to
establish the X25 VC between this PVC and the
remote one on the other side of the network. The
authorized values are 'calling' (the caller is
this PVC), 'called' (the caller is the remote
PVC), 'auto' (automatic choise between 'calling'
and 'called'). The default value is 'auto'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.20.3.1.7 |
fclX25AccPvcFacilityFacilitesrw Enumeration .1.3.6.1.4.1.866.20.1.20.20.3.1.8 |
fclX25AccPvcFacThroughputClassClasse de debit eventuellerw Enumeration .1.3.6.1.4.1.866.20.1.20.20.3.1.9 |
fclX25AccSwitchOverTable SEQUENCE OF FclX25AccSwitchOverEntry .1.3.6.1.4.1.866.20.1.20.20.4 |
fclX25AccSwitchOverEntryAn entry of fclX25AccSwitchOverTable. FclX25AccSwitchOverEntry .1.3.6.1.4.1.866.20.1.20.20.4.1 |
fclX25AccSwLogPortIdLP idro INTEGER .1.3.6.1.4.1.866.20.1.20.20.4.1.1 |
fclX25AccSwMeasureCountNombre de mesures avant basculementrw INTEGER .1.3.6.1.4.1.866.20.1.20.20.4.1.2 |
fclX25AccSwSwitchThresholdSeuil haut (en pourcentage)rw INTEGER .1.3.6.1.4.1.866.20.1.20.20.4.1.3 |
fclX25AccSwSwitchBackThresholdSeuil bas (en pourcentage)rw INTEGER .1.3.6.1.4.1.866.20.1.20.20.4.1.4 |
fclX25AccIsdnBackupTable SEQUENCE OF FclX25AccIsdnBackupEntry .1.3.6.1.4.1.866.20.1.20.20.5 |
fclX25AccIsdnBackupEntryAn entry of fclX25AccIsdnBackupTable. FclX25AccIsdnBackupEntry .1.3.6.1.4.1.866.20.1.20.20.5.1 |
fclX25AccIsdnBackLogPortIdLP idro INTEGER .1.3.6.1.4.1.866.20.1.20.20.5.1.1 |
fclX25AccIsdnBackIsdnInterfaceIdIF id (type RNIS)ro INTEGER .1.3.6.1.4.1.866.20.1.20.20.5.1.2 |
fclX25AccIsdnBackStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.20.5.1.3 |
fclX25AccIsdnRemotePeerTable SEQUENCE OF FclX25AccIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.20.6 |
fclX25AccIsdnRemotePeerEntryAn entry of fclX25AccIsdnRemotePeerTable. FclX25AccIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.20.6.1 |
fclX25AccIsdnRemLogPortIdLP idro INTEGER .1.3.6.1.4.1.866.20.1.20.20.6.1.1 |
fclX25AccIsdnRemIsdnInterfaceIdInterface RNIS distante idro INTEGER .1.3.6.1.4.1.866.20.1.20.20.6.1.2 |
fclX25AccIsdnRemStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.20.6.1.3 |
fclX25AccIsdnRemX25AccessConfigIdConfiguration X25 acces idrw INTEGER .1.3.6.1.4.1.866.20.1.20.20.6.1.4 |
fclX25AccIsdnRemPriorityPrioriterw INTEGER .1.3.6.1.4.1.866.20.1.20.20.6.1.5 |
fclX25AccIsdnRemCallRetryCountNb de tentatives appelrw INTEGER .1.3.6.1.4.1.866.20.1.20.20.6.1.6 |
fclX25AccPstnBackupTable SEQUENCE OF FclX25AccPstnBackupEntry .1.3.6.1.4.1.866.20.1.20.20.7 |
fclX25AccPstnBackupEntryAn entry of fclX25AccPstnBackupTable. FclX25AccPstnBackupEntry .1.3.6.1.4.1.866.20.1.20.20.7.1 |
fclX25AccPstnBackLogPortIdLP idro INTEGER .1.3.6.1.4.1.866.20.1.20.20.7.1.1 |
fclX25AccPstnBackStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.20.7.1.2 |
fclX25AccPstnBackInterfaceIdIF id (type ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.20.7.1.3 |
fclX25AccPstnBackPstnNumberNumero RTCrw OCTET STRING .1.3.6.1.4.1.866.20.1.20.20.7.1.4 |
fclX25AccPstnBackX25AccessConfigIdConfiguration X25 acces idrw INTEGER .1.3.6.1.4.1.866.20.1.20.20.7.1.5 |
fclX25InDIsdn OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.21 |
fclX25InDIsdnTableThis table defines the general parameters of X25
SLP (Single Link Protocol) in ISDN D channel
access logical ports. SEQUENCE OF FclX25InDIsdnEntry .1.3.6.1.4.1.866.20.1.20.21.1 |
fclX25InDIsdnEntryAn entry of fclX25InDIsdnTable. FclX25InDIsdnEntry .1.3.6.1.4.1.866.20.1.20.21.1.1 |
fclX25InDLogPortIdThe value of this object identifies one and only
one X25 in ISDN D Channel logical port. The
possible values are : '0..131'. If it is unused,
the value of this parameter is '255'. The default
value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.21.1.1.1 |
fclX25InDIsdnInterfaceIdThe value of this object identifies the ISDN Basic
Rate Interface used by this X25 in ISDN-D logical
port. The possible values are : '0..35'. If it is
unused, the value of this parameter is '255'. The
default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.21.1.1.2 |
fclX25InDTeiThe value of this object defines the TEI (Terminal
Endpoint Identifier) used by this X25 in ISDN-D
logical port. The authorized values are '1..63'.
The default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.21.1.1.3 |
fclX25InDBackupEnablingThe value of this object defines how this X25 in
ISDN-D logical port may be backuped by an ISDN-B
channel.
The possible values are :
off : backup is never enabled,
onWhileActivity : when the logical port is
DOWN, backup is enabled on reception of a
new call and remains active while at least
one X25 VC is using this way. When no VC
is active, the backup is disabled and the
next VC will be established on the logical
port (if it is UP obviously).
onWhileLpDown : when the logical port is DOWN,
backup is enabled on reception of a new
call and remains active while the logical
port is DOWN. The backup is disabled
(meaning clearing of all VCs using this
way) when the logical port comes back UP
and the next VC will be established on the
logical port.
onWhileExcessTraffic : when the traffic
overtakes the fclX25InDSwSwitchThreshold
value the logical port state is marked
DOWN (meaning clearing of all VCs), backup
is enabled on reception of a new call and
remains active while the traffic is
overtaking the
fclX25InDSwSwitchBackThreshold value. When
the traffic does not overtake any more the
fclX25InDSwSwitchBackThreshold value, the
logical port is marked UP and the backup
is disabled (meaning clearing of all VCs
using this way) so the next VC will be
established on the logical port.
This Switch Over mechanism permits to
transmit temporay excess traffic which
could not be transmitted on the ISDN-D
Channel because of an insufficient
bandwith (16 kbit/s against 64 kbits/s for
an ISDN-B Channel).
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.21.1.1.4 |
fclX25InDConnectionTypeThe value of this object indicates which is the
system connected to this X25 in ISDN-D logical
port. The possible values are :
subscriber : this X25 ISDN-D logical port
logical port is facing to a X25
subscriber, fclX25InDSubscriberNumber is
used, fclX25InDPdnLinkAddress is not used,
publicNetwork : this logical port is facing to
a X25 Public Data Network,
fclX25InDSubscriberNumber is not used,
fclX25InDPdnLinkAddress is used.
The default value is 'subscriber'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.21.1.1.5 |
fclX25InDSubscriberNumberThe value of this object is the SB number added to
the DNICZO of the equipment to make the calling
address in a call sent from this X25 in ISDN-D
logical port (if fclX25InDConnectionType is set to
'subscriber'). The value must contain 2 digits
(digits 0..9). The default value is 'FF'.rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.21.1.1.6 |
fclX25InDPdnLinkAddressThe value of this object is the X121 address of
the equipment on the connected network (if
fclX25InDConnectionType is set to
'publicNetwork'). The value may contain up to 15
digits (digits 0..9). The value must be completed
with 'F' digits for a total of 16 digits. The
equipment configurator does not need final
completion. The default value is 'FF FF FF FF FF
FF FF FF' meaning 'empty value' (blank value on
the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.21.1.1.7 |
fclX25InDX25AccessConfigIdThe value of this object identifies the X25 access
configuration used by this X25 in ISDN-D logical
port. This X25 access configuration must be
present in fclX25ConfigAccessTable. The possible
values are : '0..199. If it is unused, the value
of this parameter is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.21.1.1.8 |
fclX25InDInactivityTimerThe value of this object defines the delay in
seconds between the clearing of the last X25 VC
using this ISDN-D logical port and the clearing of
the ISDN connection. The authorized values are
'0..250'. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.21.1.1.9 |
fclX25InDActiveLinkAtBootTimeThe value of this object indicates whether the
equipment, when it has just started, must
establish the ISDN connection or not. The default
value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.21.1.1.10 |
fclX25InDSwitchOverTableThis table defines the switch over parameters of
X25 in ISDN D channel access logical ports using
the switch over mechanism. SEQUENCE OF FclX25InDSwitchOverEntry .1.3.6.1.4.1.866.20.1.20.21.2 |
fclX25InDSwitchOverEntryAn entry of fclX25InDSwitchOverTable. FclX25InDSwitchOverEntry .1.3.6.1.4.1.866.20.1.20.21.2.1 |
fclX25InDSwLogPortIdThe value of this object identifies one and only
one X25 in ISDN D Channel logical port using the
switch over mechanism (fclX25InDBackupEnabling set
to 'onWhileExcessTraffic'). The possible values
are : '0..131'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.21.2.1.1 |
fclX25InDSwMeasureCountThe value of this object is the number of traffic
measures before switching. The measure duration is
defined by fcwLoadAndTrafficSummingPeriod. The
authorized values are '0..249'. The default value
is '2'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.21.2.1.2 |
fclX25InDSwSwitchThresholdThe value of this object indicates the traffic
threshold (in percents of bandwith of the main
link of logical port) over which the switch over
mechanism is enabled. The authorized values are
'0..100'. The default value is '80'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.21.2.1.3 |
fclX25InDSwSwitchBackThresholdThe value of this object indicates the traffic
threshold (in percents of bandwith of the main
link of logical port) under which the switch over
mechanism is disabled. The authorized values are
'0..100'. The default value is '60'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.21.2.1.4 |
fclX25InDIsdnBackupTableThis table defines which ISDN Basic Rate Interface
may be used by each X25 in ISDN D channel access
logical port when enabling backup on ISDN
B-Channels. SEQUENCE OF FclX25InDIsdnBackupEntry .1.3.6.1.4.1.866.20.1.20.21.3 |
fclX25InDIsdnBackupEntryAn entry of fclX25InDIsdnBackupTable. FclX25InDIsdnBackupEntry .1.3.6.1.4.1.866.20.1.20.21.3.1 |
fclX25InDIsdnBackLogPortIdThe value of this object identifies one and only
one X25 in ISDN D channel access logical port. One
X25 X25 in ISDN D channel logical port may use
backup with one or several ISDN Basic Rate
Interfaces. The possible values are : '0..131'. If
it is unused, the value of this parameter is
'255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.21.3.1.1 |
fclX25InDIsdnBackIsdnInterfaceIdThe value of this object identifies one ISDN Basic
Rate Interface used by the X25 in ISDN D channel
access logical port defined by
fclX25InDIsdnBackLogPortId. The possible values
are : '0..35'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.21.3.1.2 |
fclX25InDIsdnBackStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.21.3.1.3 |
fclX25InDIsdnRemotePeerTableThis table defines the ISDN remote systems which
may be connected to the equipment using the backup
mechanism of X25 in ISDN D channel access logical
ports . SEQUENCE OF FclX25InDIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.21.4 |
fclX25InDIsdnRemotePeerEntryAn entry of fclX25InDIsdnRemotePeerTable. FclX25InDIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.21.4.1 |
fclX25InDIsdnRemLogPortIdThe value of this object identifies one and only
one X25 in ISDN D channel access logical port. One
X25 in ISDN D channel logical port may use backup
mechanism with one or several ISDN remote systems
(these ISDN systems can be on different
equipments). The possible values are : '0..131'.
If it is unused, the value of this parameter is
'255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.21.4.1.1 |
fclX25InDIsdnRemIsdnInterfaceIdThe value of this object identifies one and only
one ISDN remote system. This ISDN remote system
must exist in fclIsdnRemotePeerTable. There may be
several ISDN remote system for only one X25 in
ISDN D channel logical port (these ISDN systems
can be on different equipments). The possible
values are : '0..249'. If it is unused, the value
of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.21.4.1.2 |
fclX25InDIsdnRemStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.21.4.1.3 |
fclX25InDIsdnRemConnectionTypeThe value of this object indicates which is the
system connected by the backup mechanism to this
X25 in ISDN-D logical port. The possible values
are :
subscriber : this X25 ISDN-D logical port
logical port is facing to a X25
subscriber,
fclX25InDIsdnRemSubscriberNumber is used,
fclX25InDIsdnRemPdnLinkAddress is not
used,
publicNetwork : this logical port is facing to
a X25 Public Data Network,
fclX25InDIsdnRemSubscriberNumber is not
used, fclX25InDIsdnRemPdnLinkAddress is
used.
The default value is 'subscriber'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.21.4.1.4 |
fclX25InDIsdnRemSubscriberNumberThe value of this object is the SB number added to
the DNICZO of the equipment to make the calling
address in a call sent from this X25 in ISDN-D
logical port by the backup mechanism (if
fclX25InDIsdnRemConnectionType is set to
'subscriber'). The value must contain 2 digits
(digits 0..9). The default value is 'FF'.rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.21.4.1.5 |
fclX25InDIsdnRemPdnLinkAddressThe value of this object is the X121 address of
the equipment on the connected network (if
fclX25InDIsdnRemConnectionType is set to
'publicNetwork'). The value may contain up to 15
digits (digits 0..9). The value must be completed
with 'F' digits for a total of 16 digits. The
equipment configurator does not need final
completion. The default value is 'FF FF FF FF FF
FF FF FF' meaning 'empty value' (blank value on
the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.21.4.1.6 |
fclX25InDIsdnRemX25AccConfigIdThe value of this object identifies the X25 access
configuration used by this X25 in ISDN-D logical
port. backup link. This X25 access configuration
must be present in fclX25ConfigAccessTable. The
possible values are : '0..199. If it is unused,
the value of this parameter is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.21.4.1.7 |
fclX25InDIsdnRemPriorityThe value of this object indicates, when there is
several ISDN remote system for only one X25 in
ISDN D channel logical port, in which order the
equipment will try to call these several ISDN
remote system to establish an ISDN B Channel. When
a try to one ISDN remote system fails the
equipment continues, in the increasing order of
this parameter, with the following in the list
until the end of the list. The possible values are
: '0..15'. The default value is '0' (meaning
'first of the list').rw INTEGER .1.3.6.1.4.1.866.20.1.20.21.4.1.8 |
fclX25InDIsdnRemCallRetryCountThe value of this object indicates how many times
the equipment will try to call this particular
ISDN remote system to establish an ISDN B Channel.
The possible values are : '1..15'. The default
value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.21.4.1.9 |
fclX25InBIsdn OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.22 |
fclX25InBIsdnTableThis table defines the general parameters of X25
SLP (Single Link Protocol) in ISDN B channel
logical ports. SEQUENCE OF FclX25InBIsdnEntry .1.3.6.1.4.1.866.20.1.20.22.1 |
fclX25InBIsdnEntryAn entry of fclX25InBIsdnTable. FclX25InBIsdnEntry .1.3.6.1.4.1.866.20.1.20.22.1.1 |
fclX25InBLogPortIdThe value of this object identifies one and only
one X25 in ISDN B Channel logical port. The
possible values are : '0..131'. If it is unused,
the value of this parameter is '255'. The default
value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.22.1.1.1 |
fclX25InBIsdnInterfaceIdThe value of this object identifies the ISDN Basic
Rate Interface used by this X25 in ISDN-B logical
port. The possible values are : '0..35'. If it is
unused, the value of this parameter is '255'. The
default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.22.1.1.2 |
fclX25InBRemotePeerTableThis table defines the ISDN remote systems which
may be connected to the equipment using an X25 in
ISDN B channel logical ports . SEQUENCE OF FclX25InBRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.22.2 |
fclX25InBRemotePeerEntryAn entry of fclX25InBRemotePeerTable. FclX25InBRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.22.2.1 |
fclX25InBRemX121AddrThe value of this object is the X121 address of
one or several ISDN remote systems. The value may
contain up to 15 digits (digits 0..9, A,B,D).
The digits 'A', 'B', 'D' (respectively characters
':', '*', '?' on the equipment configurator) have
special meanings :
'A' is a separator used to defines which digits
of this X121 address are added to the
value of fcfIsdnRemIsdnNumber
corresponding to fclX25InBRemPeerId to
make the complete ISDN address. When used
there must be exactly two separators to
mark the beginning and the end of the
digits selection.
'B' matches any address. When used it must be
the only digit specified (with final
completion as explained below).
'D' matches any single digit.
The value must be completed with 'F' digits for a
total of 16 digits. The equipment configurator
does not need final completion. The default value
is 'FF FF FF FF FF FF FF FF' meaning 'empty value'
(blank value on the equipment configurator).ro OCTET STRING .1.3.6.1.4.1.866.20.1.20.22.2.1.1 |
fclX25InBRemPeerIdThe value of this object identifies one and only
one ISDN remote system. This ISDN remote system
must exist in fclIsdnRemotePeerTable. There may be
several ISDN remote system for only one X121
address. The possible values are : '0..249' in
releases before 4.2, '0..999' after. If it is
unused, the value of this parameter is '255' or
'65535'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.22.2.1.2 |
fclX25InBRemStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.22.2.1.3 |
fclX25InBRemConnectionTypeThe value of this object indicates which is the
ISDN remote system connected to one of the X25 in
ISDN-B logical port. The possible values are :
subscriber : this X25 ISDN-B logical port
logical port is facing to a X25
subscriber, fclX25InBRemSubscriberNumber
is used, fclX25InBRemPdnLinkAddress is not
used,
publicNetwork : this logical port is facing to
a X25 Public Data Network,
fclX25InBRemSubscriberNumber is not used,
fclX25InBRemPdnLinkAddress is used.
interNode : this logical port is used as
inter-node ling (i.e. inside an X25
network),
fclX25InBRemSubscriberNumber is not used,
fclX25InBRemPdnLinkAddress is not used.
The default value is 'subscriber'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.22.2.1.4 |
fclX25InBRemSubscriberNumberThe value of this object is the SB number added to
the DNICZO of the equipment to make the calling
address in a call sent to this ISDN remote system
(if fclX25InBRemConnectionType is set to
'subscriber'). The value must contain 2 digits
(digits 0..9). The default value is 'FF'.rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.22.2.1.5 |
fclX25InBRemPdnLinkAddressThe value of this object is the X121 address of
the equipment on the connected network (if
fclX25InBRemConnectionType is set to
'publicNetwork'). The value may contain up to 15
digits (digits 0..9). The value must be completed
with 'F' digits for a total of 16 digits. The
equipment configurator does not need final
completion. The default value is 'FF FF FF FF FF
FF FF FF' meaning 'empty value' (blank value on
the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.22.2.1.6 |
fclX25InBRemX25ConfigIdThe value of this object identifies the X25
configuration used to establish the X25 VC towards
the ISDN remote system. This X25 configuration
must be present in fclX25ConfigAccessTable (case
X25 access configuration if
fclX25InBRemConnectionType is set to 'subscriber'
or 'publicNetwork') or in
fclX25ConfigInterNodeTable (case X25 inter-node
configuration if fclX25InBRemConnectionType is set
to 'interNode'). The possible values are :
'0..199'. If it is unused, the value of this
parameter is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.22.2.1.7 |
fclX25InBRemPriorityThe value of this object indicates, when there is
several ISDN remote system for only one X121
address, in which order the equipment will try to
call these several ISDN remote system to establish
an ISDN B Channel. When a try to one ISDN remote
system fails the equipment continues, in the
increasing order of this parameter, with the
following in the list until the end of the list.
The possible values are : '0..15'. The default
value is '0' (meaning 'first of the list').rw INTEGER .1.3.6.1.4.1.866.20.1.20.22.2.1.8 |
fclX25InBRemCallRetryCountThe value of this object indicates how many times
the equipment will try to call this particular
ISDN remote system to establish an ISDN B Channel.
The possible values are : '1..15'. The default
value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.22.2.1.9 |
fclX25InBRemLinkCheckPeriodThe value of this object is the scanning time (in
milliseconds) to detect the B-Channel state. The
authorized values are '2000..50800' by steps of
200 msec. The default value is '200'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.22.2.1.10 |
fclX25InBRemCheckPeriodCountThe value of this object is the number of periods
of 'fclX25InBRemLinkCheckPeriod' milliseconds
before declaring the state of the B-Channel. The
authorized values are '1..250'. The default value
is '3'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.22.2.1.11 |
fclX25InPstn OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.23 |
fclX25InPstnTableThis table defines the general parameters of X25
SLP (Single Link Protocol) in PSTN (Public
Switched Telephone Network) link inter-node
logical ports. SEQUENCE OF FclX25InPstnEntry .1.3.6.1.4.1.866.20.1.20.23.1 |
fclX25InPstnEntryAn entry of fclX25InPstnTable. FclX25InPstnEntry .1.3.6.1.4.1.866.20.1.20.23.1.1 |
fclX25PstnLogPortIdThe value of this object identifies one and only
one X25 in PSTN link logical port. The possible
values are : '0..131'. If it is unused, the value
of this parameter is '255'. The default value is
'255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.23.1.1.1 |
fclX25PstnInterfaceIdThe value of this object identifies the line
interface used by this X25 in PSTN logical port.
The possible values are : '0..35'. If it is
unused, the value of this parameter is '255'. The
default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.23.1.1.2 |
fclX25PstnX25InterNodeConfigIdThe value of this object identifies the X25
inter-node configuration used to establish the X25
VC towards the PSTN remote system. This X25
inter-node configuration must be present in
fclX25ConfigInterNodeTable. The possible values
are : '0..199'. If it is unused, the value of this
parameter is '255'. The default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.23.1.1.3 |
fclX25PstnRemotePeerTableThis table defines the PSTN remote systems which
may be called by the equipment using a X25 in PSTN
link logical ports . SEQUENCE OF FclX25PstnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.23.2 |
fclX25PstnRemotePeerEntryAn entry of fclX25PstnRemotePeerTable. FclX25PstnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.23.2.1 |
fclX25PstnRemX121AddrThe value of this object is the X121 address of
one PSTN remote system. The value may contain up
to 15 digits (digits 0..9, B, D).
The digits 'B', 'D' (respectively characters '*',
'?' on the equipment configurator) have special
meanings :
'B' matches any address. When used it must be
the only digit specified (with final
completion as explained below).
'D' matches any single digit.
The value must be completed with 'F' digits for a
total of 16 digits. The equipment configurator
does not need final completion. The default value
is 'FF FF FF FF FF FF FF FF' meaning 'empty value'
(blank value on the equipment configurator).ro OCTET STRING .1.3.6.1.4.1.866.20.1.20.23.2.1.1 |
fclX25PstnRemStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.23.2.1.2 |
fclX25PstnRemPstnNumberThe value of this object is the PSTN address of
this PSTN remote system. The value may contain up
to 28 digits (digits 0..E).
The digits 'A', 'B', 'C', 'D', 'E' (respectively
characters 'W', ',', 'P', 'T', '!' on the
equipment configurator) have special meanings :
'A' means 'attente de tonalite',
'B' means 'pause of 2 seconds',
'C' means 'numerotation decimale',
'D' means 'numerotation multifrequence',
'E' means 'raccrocher 0.5 second'.
The value must be completed with 'F' digits for a
total of 28 digits. The equipment configurator
does not need final completion. The default value
is 'FF FF FF FF FF FF FF FF' meaning 'empty value'
(blank value on the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.23.2.1.3 |
fclX25SlpInterNode OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.24 |
fclX25SlpInterNodeTableThis table defines the general parameters of X25
SLP (Single Link Protocol) inter-node logical
ports. SEQUENCE OF FclX25SlpInterNodeEntry .1.3.6.1.4.1.866.20.1.20.24.1 |
fclX25SlpInterNodeEntryAn entry of fclX25SlpInterNodeTable. FclX25SlpInterNodeEntry .1.3.6.1.4.1.866.20.1.20.24.1.1 |
fclX25SlpLogPortIdThe value of this object identifies one and only
one X25 SLP (Single Link Protocol) inter-node
logical port. The possible values are : '0..131'.
If it is unused, the value of this parameter is
'255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.24.1.1.1 |
fclX25SlpInterfaceIdThe value of this object identifies the line
interface used by this X25 inter-node logical
port. The possible values are : '0..35'. If it is
unused, the value of this parameter is '255'. The
default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.24.1.1.2 |
fclX25SlpIsdnBackupEnablingThe value of this object defines how this X25
inter-node logical port may be backuped by an
ISDN-B channel.
The possible values are :
off : backup is never enabled,
onWhileActivity : when the logical port is
DOWN, backup is enabled on reception of a
new call and remains active while at least
one X25 VC is using this way. When no VC
is active, the backup is disabled and the
next VC will be established on the logical
port (if it is UP obviously).
onWhileLpDown : when the logical port is DOWN,
backup is enabled on reception of a new
call and remains active while the logical
port is DOWN. The backup is disabled
(meaning clearing of all VCs using this
way) when the logical port comes back UP
and the next VC will be established on the
logical port.
onWhileExcessTraffic : when the traffic
overtakes the fclX25SlpSwSwitchThreshold
value the logical port state is marked
DOWN (meaning clearing of all VCs), backup
is enabled on reception of a new call and
remains active while the traffic is
overtaking the
fclX25SlpSwSwitchBackThreshold value. When
the traffic does not overtake any more the
fclX25SlpSwSwitchBackThreshold value, the
logical port is marked UP and the backup
is disabled (meaning clearing of all VCs
using this way) so the next VC will be
established on the logical port.
This Switch Over mechanism permits to
transmit temporay excess traffic which
could not be transmitted on the logical
port because of an insufficient bandwith
on a line interface with a speed
(fcfLineSpeed) inferior to 64 kbit/s.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.24.1.1.3 |
fclX25SlpPstnBackupEnablingThe value of this object defines how this X25
inter-node logical port may be backuped by a PSTN
(Public Switched Telephone Network) link.
The possible values are :
off : backup is never enabled,
onWhileActivity : when the logical port is
DOWN, backup is enabled on reception of a
new call and remains active while at least
one X25 VC is using this way. When no VC
is active, the backup is disabled and the
next VC will be established on the logical
port (if it is UP obviously).
onWhileLpDown : when the logical port is DOWN,
backup is enabled on reception of a new
call and remains active while the logical
port is DOWN. The backup is disabled
(meaning clearing of all VCs using this
way) when the logical port comes back UP
and the next VC will be established on the
logical port.
onWhileExcessTraffic : when the traffic
overtakes the fclX25SlpSwSwitchThreshold
value the logical port state is marked
DOWN (meaning clearing of all VCs), backup
is enabled on reception of a new call and
remains active while the traffic is
overtaking the
fclX25SlpSwSwitchBackThreshold value. When
the traffic does not overtake any more the
fclX25SlpSwSwitchBackThreshold value, the
logical port is marked UP and the backup
is disabled (meaning clearing of all VCs
using this way) so the next VC will be
established on the logical port.
This Switch Over mechanism permits to
transmit temporay excess traffic which
could not be transmitted on the logical
port because of an insufficient bandwith
on a line interface with a speed
(fcfLineSpeed) inferior to the speed of a
PSTN link (depending on modem capability).
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.24.1.1.4 |
fclX25SlpX25InterNodeConfigIdThe value of this object identifies the X25
inter-node configuration used by this X25
inter-node logical port. This X25 inter-node
configuration must be present in
fclX25ConfigInterNodeTable. The possible values
are : '0..199. If it is unused, the value of this
parameter is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.24.1.1.5 |
fclX25SlpDARApplicableLigne utilisable par le RADrw Enumeration .1.3.6.1.4.1.866.20.1.20.24.1.1.6 |
fclX25SlpBackupTimerTempo de retour sur LSrw INTEGER .1.3.6.1.4.1.866.20.1.20.24.1.1.7 |
fclX25SlpSwitchOverTableThis table defines the switch over parameters of
X25 inter-node logical ports using the switch over
mechanism. SEQUENCE OF FclX25SlpSwitchOverEntry .1.3.6.1.4.1.866.20.1.20.24.2 |
fclX25SlpSwitchOverEntryAn entry of fclX25SlpSwitchOverTable. FclX25SlpSwitchOverEntry .1.3.6.1.4.1.866.20.1.20.24.2.1 |
fclX25SlpSwLogPortIdThe value of this object identifies one and only
one X25 inter-node logical port using the switch
over mechanism (fclX25SlpIsdnBackupEnabling or
fclX25SlpPstnBackupEnabling set to
'onWhileExcessTraffic'). The possible values are :
'0..131'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.24.2.1.1 |
fclX25SlpSwMeasureCountThe value of this object is the number of traffic
measures before switching. The measure duration is
defined by fcwLoadAndTrafficSummingPeriod. The
authorized values are '0..249'. The default value
is '2'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.24.2.1.2 |
fclX25SlpSwSwitchThresholdThe value of this object indicates the traffic
threshold (in percents of bandwith of the main
link of logical port) over which the switch over
mechanism is enabled. The authorized values are
'0..100'. The default value is '80'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.24.2.1.3 |
fclX25SlpSwSwitchBackThresholdThe value of this object indicates the traffic
threshold (in percents of bandwith of the main
link of logical port) under which the switch over
mechanism is disabled. The authorized values are
'0..100'. The default value is '60'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.24.2.1.4 |
fclX25SlpIsdnBackupTableThis table defines which ISDN Basic Rate Interface
may be used by each X25 inter-node logical port
when enabling backup on ISDN B-Channels. SEQUENCE OF FclX25SlpIsdnBackupEntry .1.3.6.1.4.1.866.20.1.20.24.3 |
fclX25SlpIsdnBackupEntryAn entry of fclX25SlpIsdnBackupTable. FclX25SlpIsdnBackupEntry .1.3.6.1.4.1.866.20.1.20.24.3.1 |
fclX25SlpIsdnBackLogPortIdThe value of this object identifies one and only
one X25 SLP (Single Link Protocol) inter-node
logical port. One X25 inter-node logical port may
use backup with one or several ISDN Basic Rate
Interfaces. The possible values are : '0..131'. If
it is unused, the value of this parameter is
'255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.24.3.1.1 |
fclX25SlpIsdnBackIsdnInterfaceIdThe value of this object identifies one ISDN Basic
Rate Interface used by the X25 inter-node logical
port defined by fclX25SlpIsdnBackLogPortId. The
possible values are : '0..35'. If it is unused,
the value of this parameter is '255'. The default
value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.24.3.1.2 |
fclX25SlpIsdnBackStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.24.3.1.3 |
fclX25SlpIsdnRemotePeerTableThis table defines the ISDN remote systems which
may be connected to the equipment using the backup
mechanism of X25 inter-node logical ports. SEQUENCE OF FclX25SlpIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.24.4 |
fclX25SlpIsdnRemotePeerEntryAn entry of fclX25SlpIsdnRemotePeerTable. FclX25SlpIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.24.4.1 |
fclX25SlpIsdnRemLogPortIdThe value of this object identifies one and only
one X25 SLP (Single Link Protocol) inter-node
logical port. One X25 inter-node logical port may
use backup mechanism with one or several ISDN
remote systems (these ISDN systems can be on
different equipments). The possible values are :
'0..131'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.24.4.1.1 |
fclX25SlpIsdnRemIsdnInterfaceIdThe value of this object identifies one and only
one ISDN remote system. This ISDN remote system
must exist in fclIsdnRemotePeerTable. There may be
several ISDN remote system for only one X25
inter-node logical port (these ISDN systems can be
on different equipments). The possible values are
: '0..249'. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.24.4.1.2 |
fclX25SlpIsdnRemStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.24.4.1.3 |
fclX25SlpIsdnRemX25InterNodeConfigIdThe value of this object identifies the X25
inter-node configuration used by this X25
inter-node logical port backup link. This X25
inter-node configuration must be present in
fclX25ConfigInterNodeTable. The possible values
are : '0..199. If it is unused, the value of this
parameter is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.24.4.1.4 |
fclX25SlpIsdnRemPriorityThe value of this object indicates, when there is
several ISDN remote system for only one X25
inter-node logical port, in which order the
equipment will try to call these several ISDN
remote system to establish an ISDN B Channel. When
a try to one ISDN remote system fails the
equipment continues, in the increasing order of
this parameter, with the following in the list
until the end of the list. The possible values are
: '0..15'. The default value is '0' (meaning
'first of the list').rw INTEGER .1.3.6.1.4.1.866.20.1.20.24.4.1.5 |
fclX25SlpIsdnRemCallRetryCountThe value of this object indicates how many times
the equipment will try to call this particular
ISDN remote system to establish an ISDN B Channel.
The possible values are : '1..15'. The default
value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.24.4.1.6 |
fclX25SlpPstnBackupTableThis table defines which line interface may be
used by each X25 inter-node logical ports when
enabling backup mechanism on PSTN links. SEQUENCE OF FclX25SlpPstnBackupEntry .1.3.6.1.4.1.866.20.1.20.24.5 |
fclX25SlpPstnBackupEntryAn entry of fclX25SlpPstnBackupTable. FclX25SlpPstnBackupEntry .1.3.6.1.4.1.866.20.1.20.24.5.1 |
fclX25SlpPstnBackLogPortIdThe value of this object identifies one and only
one X25 SLP (Single Link Protocol) inter-node
logical port. The possible values are : '0..131'.
If it is unused, the value of this parameter is
'255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.24.5.1.1 |
fclX25SlpPstnBackStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.24.5.1.2 |
fclX25SlpPstnBackInterfaceIdThe value of this object identifies the line
interface used by the X25 inter-node logical port
defined by fclX25SlpPstnBackLogPortId. The
possible values are : '0..35'. If it is unused,
the value of this parameter is '255'. The default
value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.24.5.1.3 |
fclX25SlpPstnBackPstnNumberThe value of this object is the PSTN address of
this PSTN remote system. The value may contain up
to 28 digits (digits 0..E).
The digits 'A', 'B', 'C', 'D', 'E' (respectively
characters 'W', ',', 'P', 'T', '!' on the
equipment configurator) have special meanings :
'A' means 'attente de tonalite',
'B' means 'pause of 2 seconds',
'C' means 'numerotation decimale',
'D' means 'numerotation multifrequence',
'E' means 'raccrocher 0.5 second'.
The value must be completed with 'F' digits for a
total of 28 digits. The equipment configurator
does not need final completion. The default value
is 'FF FF FF FF FF FF FF FF' meaning 'empty value'
(blank value on the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.24.5.1.4 |
fclX25SlpPstnBackX25InterNodeConfigIdThe value of this object identifies the X25
inter-node configuration used by this X25
inter-node logical port backup link. This X25
inter-node configuration must be present in
fclX25ConfigInterNodeTable. The possible values
are : '0..199. If it is unused, the value of this
parameter is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.24.5.1.5 |
fclX25Mlp OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.25 |
fclX25MlpTableThis table defines the general parameters of X25
MLP (Multi-Link Protocol) inter-node logical ports. SEQUENCE OF FclX25MlpEntry .1.3.6.1.4.1.866.20.1.20.25.1 |
fclX25MlpEntryAn entry of fclX25MlpTable. FclX25MlpEntry .1.3.6.1.4.1.866.20.1.20.25.1.1 |
fclX25MlpLogPortIdThe value of this object identifies one and only
one X25 MLP (Multi-Link Protocol) inter-node
logical port. The possible values are : '0..131'.
If it is unused, the value of this parameter is
'255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.25.1.1.1 |
fclX25MlpLink1InterfaceIdThe value of this object identifies the first line
interface used by this X25 MLP logical port. This
line interface is mandatory. The possible values
are : '0..35'. If it is unused, the value of this
parameter is '255'. The default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.1.1.2 |
fclX25MlpLink2InterfaceIdThe value of this object identifies the second
line interface used by this X25 MLP logical port.
This line interface is optional. The possible
values are : '0..35'. If it is unused, the value
of this parameter is '255'. The default value is
'255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.1.1.3 |
fclX25MlpLink3InterfaceIdThe value of this object identifies the third line
interface used by this X25 MLP logical port. This
line interface is optional. The possible values
are : '0..35'. If it is unused, the value of this
parameter is '255'. The default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.1.1.4 |
fclX25MlpLink4InterfaceIdThe value of this object identifies the fourth
line interface used by this X25 MLP logical port.
This line interface is optional. The possible
values are : '0..35'. If it is unused, the value
of this parameter is '255'. The default value is
'255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.1.1.5 |
fclX25MlpIsdnOverflowThe value of this object defines how this X25 MLP
logical port may use additional ISDN-B channel to
transmit temporary excess traffic (overflow
mechanism). When opening or closing additional
B-Channels the existing VCs are not cleared, so
this overflow mechanism does not alter the
communication between the two extremities.
The possible values are :
off : overflow is never enabled,
onSlave : overflow is enabled by the connected
equipment,
onMasterWhileActivity : when the traffic
overtakes the fclX25MlpOvOverflowThreshold
value for all the links in use (line
interfaces and eventual ISDN B-Channels),
a new ISDN B-Channel is open by the
equipment and remains active while at
least one X25 VC is using this way. When
no VC is active, this ISDN B-Channel is
closed.
onMasterWhileExcessTraffic : when the traffic
overtakes the fclX25MlpOvOverflowThreshold
value for all the links in use (line
interfaces and eventual ISDN B-Channels),
a new ISDN B-Channel is open by the
equipment and remains active while the
traffic is overtaking the
fclX25SlpOvOverflowBackThreshold value.
When the traffic does not overtake any
more the fclX25SlpOvOverflowBackThreshold
value, this ISDN B-Channel is closed.
When one line interface is DOWN its bandwith is
considered as being 0. So the overflow mechanism
may be used as a backup mechanism which permits to
not clear existing VCs.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.25.1.1.6 |
fclX25MlpPstnOverflowThe value of this object defines how this X25 MLP
logical port may use additional PSTN links to
transmit temporary excess traffic (overflow
mechanism). When opening or closing additional
PSTN links the existing VCs are not cleared, so
this overflow mechanism does not alter the
communication between the two extremities.
The possible values are :
off : overflow is never enabled,
onSlave : overflow is enabled by the connected
equipment,
onMasterWhileActivity : when the traffic
overtakes the fclX25MlpOvOverflowThreshold
value for all the links in use (line
interfaces and eventual PSTN links), a new
PSTN link is open by the equipment and
remains active while at least one X25 VC
is using this way. When no VC is active,
this PSTN link is closed.
onMasterWhileExcessTraffic : when the traffic
overtakes the fclX25MlpOvOverflowThreshold
value for all the links in use (line
interfaces and eventual PSTN links), a new
PSTN link is open by the equipment and
remains active while the traffic is
overtaking the
fclX25SlpOvOverflowBackThreshold value.
When the traffic does not overtake any
more the fclX25SlpOvOverflowBackThreshold
value, this PSTN link is closed.
When one line interface is DOWN its bandwith is
considered as being 0. So the overflow mechanism
may be used as a backup mechanism which permits to
not clear existing VCs.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.25.1.1.7 |
fclX25MlpX25InterNodeConfigIdThe value of this object identifies the X25
inter-node configuration used by this X25 MLP
logical port. This X25 inter-node configuration
must be present in fclX25ConfigInterNodeTable. The
possible values are : '0..199. If it is unused,
the value of this parameter is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.1.1.8 |
fclX25MlpDARApplicableLigne utilisable par le RADrw Enumeration .1.3.6.1.4.1.866.20.1.20.25.1.1.9 |
fclX25MlpParameterTableThis table defines the MLP parameters of X25 MLP
(Multi-Link Protocol) inter-node logical ports. SEQUENCE OF FclX25MlpParameterEntry .1.3.6.1.4.1.866.20.1.20.25.2 |
fclX25MlpParameterEntryAn entry of fclX25MlpParameterTable. FclX25MlpParameterEntry .1.3.6.1.4.1.866.20.1.20.25.2.1 |
fclX25MlpParamLogPortIdThe value of this object identifies one and only
one X25 MLP (Multi-Link Protocol) inter-node
logical port. The possible values are : '0..131'.
If it is unused, the value of this parameter is
'255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.25.2.1.1 |
fclX25MlpMwMultilinkWindowSizeThe value of this object is the maximum number
(MW) of sequentially numbered multilink frames
that the DCE or DTE may transfer which the lowest
numbered multilink frame which has not yet been
acknowledged beyond. This parameter shall have the
same value for both switching points. The
authorized values are '1..32'. The default value
is '32'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.2.1.2 |
fclX25MlpRxMlpMxWinGuardRegionThe value of this object defines a guard region
(MX) of multilink sequence numbers of fixed size.
The range of MX shall be large enough for that the
receiving MLP recognizes the highest numbered
frame that it may receive after the multilink
frame loss. The window MX must be smaller than or
equal to the window MW. The authorized values are
'1..32'. The default value is '32'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.2.1.3 |
fclX25MlpMt1LostFrameTimerThe value of this object defines the timer (MT1),
in seconds, which a transmitted frames is declared
lost beyond. The authorized values are '1..255'.
The default value is '22'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.2.1.4 |
fclX25MlpMt3ResetConfirmationTimerThe value of this object defines the maximum time
(MT3), in seconds, between a reset request and a
reset confirmation, which the multilink resetting
procedure restarts beyond. The authorized values
are '1..255'. The default value is '10'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.2.1.5 |
fclX25MlpMt4DownLinkDetectionTimerThe value of this object defines the timer (MT4),
in seconds, which the line is declared down
beyond. The line is out if all the lines of the
MLP group are down. The authorized values are
'0..255'. The default value is '40'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.2.1.6 |
fclX25MlpFramesMaxCountByLinkThe value of this object is the maximum number of
transmitted frames on a line. The authorized
values are '1..255'. The default value is '3'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.2.1.7 |
fclX25MlpRestartTxAfterResetRxThe value of this object indicates if there is
recovery after MLP reset. The authorized values
are 'off' or 'on'. The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.25.2.1.8 |
fclX25MlpTns3Level3CheckTimerThe value of this object defines the timer, in
seconds, between a sending of frames and the
reception of its acknowledges, which the multilink
resetting procedure restarts beyond. The
authorized values are '0..255' by step of 10
seconds. The default value is '10'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.2.1.9 |
fclX25MlpOverflowTableThis table defines the overflow parameters of X25
MLP logical ports enabling the overflow mechanism. SEQUENCE OF FclX25MlpOverflowEntry .1.3.6.1.4.1.866.20.1.20.25.3 |
fclX25MlpOverflowEntryAn entry of fclX25MlpOverflowTable. FclX25MlpOverflowEntry .1.3.6.1.4.1.866.20.1.20.25.3.1 |
fclX25MlpOvLogPortIdThe value of this object identifies one and only
one X25 MLP logical port enabling the overflow
mechanism (fclX25MlpIsdnOverflow or
fclX25MlpPstnOverflow set to
'onMasterWhileActivity',
'onMasterWhileExcessTraffic'). The possible values
are : '0..131'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.25.3.1.1 |
fclX25MlpOvMeasureCountThe value of this object is the number of traffic
measures before opening an additional link. The
measure duration is defined by
fcwLoadAndTrafficSummingPeriod. The authorized
values are '0..249'. The default value is '2'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.3.1.2 |
fclX25MlpOvOverflowThresholdThe value of this object indicates the traffic
threshold (in percents of bandwith of alls the
link in use by this logical port) over which a new
link is open. The authorized values are '0..100'.
The default value is '80'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.3.1.3 |
fclX25MlpOvOverflowBackThresholdThe value of this object indicates the traffic
threshold (in percents of bandwith of alls the
link in use by this logical port) under which the
last open link is closed. The authorized values
are '0..100'. The default value is '60'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.3.1.4 |
fclX25MlpIsdnOverflowTableThis table defines which ISDN Basic Rate Interface
may be used by each X25 MLP logical ports when
enabling overflow mechanism on ISDN B-Channels. SEQUENCE OF FclX25MlpIsdnOverflowEntry .1.3.6.1.4.1.866.20.1.20.25.4 |
fclX25MlpIsdnOverflowEntryAn entry of fclX25MlpIsdnOverflowTable. FclX25MlpIsdnOverflowEntry .1.3.6.1.4.1.866.20.1.20.25.4.1 |
fclX25MlpIsdnOverLogPortIdThe value of this object identifies one and only
one X25 MLP (Multi-Link Protocol) inter-node
logical port. One X25 MLP logical port may use
overflow mechanism with one or several ISDN Basic
Rate Interfaces. The possible values are :
'0..131'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.25.4.1.1 |
fclX25MlpIsdnOverIsdnInterfaceIdThe value of this object identifies one ISDN Basic
Rate Interface used by the X25 MLP logical port
defined by fclX25MlpIsdnOverLogPortId. The
possible values are : '0..35'. If it is unused,
the value of this parameter is '255'. The default
value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.25.4.1.2 |
fclX25MlpIsdnOverStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.25.4.1.3 |
fclX25MlpIsdnOverBChannelCountThe value of this object is the number of B
channels of this ISDN Basic Rate Interface that
may be used. The authorized values are '1..30'.
The default value is '2'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.4.1.4 |
fclX25MlpIsdnRemotePeerTableThis table defines the ISDN remote systems which
may be connected to the equipment using the
overflow mechanism of X25 MLP logical ports. SEQUENCE OF FclX25MlpIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.25.5 |
fclX25MlpIsdnRemotePeerEntryAn entry of fclX25MlpIsdnRemotePeerTable. FclX25MlpIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.25.5.1 |
fclX25MlpIsdnRemLogPortIdThe value of this object identifies one and only
one X25 MLP (Multi-Link Protocol) inter-node
logical port. One X25 MLP logical port may use
overflow mechanism with one or several ISDN remote
systems (but all these ISDN systems must be on the
same equipment to make X25 MLP work correctly).
The possible values are : '0..131'. If it is
unused, the value of this parameter is '255'. The
default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.25.5.1.1 |
fclX25MlpIsdnRemPeerIdThe value of this object identifies one and only
one ISDN remote system. This ISDN remote system
must exist in fclIsdnRemotePeerTable. There may be
several ISDN remote system for only one X25 MLP
logical port (but all these ISDN systems must be
on the same equipment to make X25 MLP work
correctly). The possible values are : '0..249'. If
it is unused, the value of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.25.5.1.2 |
fclX25MlpIsdnRemStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.25.5.1.3 |
fclX25MlpIsdnRemPriorityThe value of this object indicates, when there is
several ISDN remote system for only one X25 MLP
logical port, in which order the equipment will
try to call these several ISDN remote system to
establish an ISDN B Channel. When a try to one
ISDN remote system fails the equipment continues,
in the increasing order of this parameter, with
the following in the list until the end of the
list. The possible values are : '0..15'. The
default value is '0' (meaning 'first of the list').rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.5.1.4 |
fclX25MlpIsdnRemCallRetryCountThe value of this object indicates how many times
the equipment will try to call this particular
ISDN remote system to establish an ISDN B Channel.
The possible values are : '1..15'. The default
value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.5.1.5 |
fclX25MlpPstnOverflowTableThis table defines which line interface may be
used by each X25 MLP logical ports when enabling
overflow mechanism on PSTN links. SEQUENCE OF FclX25MlpPstnOverflowEntry .1.3.6.1.4.1.866.20.1.20.25.6 |
fclX25MlpPstnOverflowEntryAn entry of fclX25MlpPstnOverflowTable. FclX25MlpPstnOverflowEntry .1.3.6.1.4.1.866.20.1.20.25.6.1 |
fclX25MlpPstnOvLogPortIdThe value of this object identifies one and only
one X25 MLP (Multi-Link Protocol) inter-node
logical port. The possible values are : '0..131'.
If it is unused, the value of this parameter is
'255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.25.6.1.1 |
fclX25MlpPstnOvStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.25.6.1.2 |
fclX25MlpPstnOvInterfaceIdThe value of this object identifies the line
interface used by the X25 MLP logical port defined
by fclX25MlpPstnOverLogPortId. The possible values
are : '0..35'. If it is unused, the value of this
parameter is '255'. The default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.25.6.1.3 |
fclX25MlpPstnOvPstnNumberThe value of this object is the PSTN address of
this PSTN remote system. The value may contain up
to 28 digits (digits 0..E).
The digits 'A', 'B', 'C', 'D', 'E' (respectively
characters 'W', ',', 'P', 'T', '!' on the
equipment configurator) have special meanings :
'A' means 'attente de tonalite',
'B' means 'pause of 2 seconds',
'C' means 'numerotation decimale',
'D' means 'numerotation multifrequence',
'E' means 'raccrocher 0.5 second'.
The value must be completed with 'F' digits for a
total of 28 digits. The equipment configurator
does not need final completion. The default value
is 'FF FF FF FF FF FF FF FF' meaning 'empty value'
(blank value on the equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.25.6.1.4 |
fclPointToPointProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.30 |
fclPppSerialLinkAccess OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.30.1 |
fclPppSerialLogPortTable SEQUENCE OF FclPppSerialLogPortEntry .1.3.6.1.4.1.866.20.1.20.30.1.1 |
fclPppSerialLogPortEntryAn entry of fclPppSerialLogPortTable. FclPppSerialLogPortEntry .1.3.6.1.4.1.866.20.1.20.30.1.1.1 |
fclPppSerLpLogPortIdLP idro INTEGER .1.3.6.1.4.1.866.20.1.20.30.1.1.1.1 |
fclPppSerLpInterfaceIdIF id (type ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.30.1.1.1.2 |
fclPppSerLpLocalSubscriberNbNumero d'abonnerw OCTET STRING .1.3.6.1.4.1.866.20.1.20.30.1.1.1.3 |
fclPppSerLpConfigIdConfig PPP idrw INTEGER .1.3.6.1.4.1.866.20.1.20.30.1.1.1.10 |
fclPppSerLpCosCOSrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.1.1.1.20 |
fclPppSerLpCirEntrant CIRrw INTEGER .1.3.6.1.4.1.866.20.1.20.30.1.1.1.21 |
fclPppSerLpMinCirEntrant CIR minirw INTEGER .1.3.6.1.4.1.866.20.1.20.30.1.1.1.22 |
fclPppSerLpBeEntrant BErw INTEGER .1.3.6.1.4.1.866.20.1.20.30.1.1.1.23 |
fclPppSerialAutoCallTable SEQUENCE OF FclPppSerialAutoCallEntry .1.3.6.1.4.1.866.20.1.20.30.1.2 |
fclPppSerialAutoCallEntryAn entry of fclPppSerialAutoCallTable. FclPppSerialAutoCallEntry .1.3.6.1.4.1.866.20.1.20.30.1.2.1 |
fclPppSerAutoLogPortIdLP idro INTEGER .1.3.6.1.4.1.866.20.1.20.30.1.2.1.1 |
fclPppSerAutoStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.1.2.1.2 |
fclPppSerAutoRemoteAddressAdresse du point viserw OCTET STRING .1.3.6.1.4.1.866.20.1.20.30.1.2.1.3 |
fclPppSerAutoMinimumRecallTimerTempo de retransmission appelrw INTEGER .1.3.6.1.4.1.866.20.1.20.30.1.2.1.7 |
fclPppSerAutoInactivityTimerDuree de silence (Tb)rw INTEGER .1.3.6.1.4.1.866.20.1.20.30.1.2.1.8 |
fclPppSerAutoReliableVcCV fiabiliserw Enumeration .1.3.6.1.4.1.866.20.1.20.30.1.2.1.10 |
fclPppSerAutoCompressionCompression : abonnement et directionrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.1.2.1.11 |
fclPppSerAutoCompressNegotiationCompression : negociation et caractererw Enumeration .1.3.6.1.4.1.866.20.1.20.30.1.2.1.12 |
fclPppSerAutoCompressScramblingCompression : brouillagerw Enumeration .1.3.6.1.4.1.866.20.1.20.30.1.2.1.13 |
fclPppSerAutoCompressMultiPktTimerCompression : tempo attente multi-paquet msecrw INTEGER .1.3.6.1.4.1.866.20.1.20.30.1.2.1.14 |
fclPppPstnAccess OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.30.2 |
fclPppPstnLogPortTable SEQUENCE OF FclPppPstnLogPortEntry .1.3.6.1.4.1.866.20.1.20.30.2.1 |
fclPppPstnLogPortEntryAn entry of fclPppPstnLogPortTable. FclPppPstnLogPortEntry .1.3.6.1.4.1.866.20.1.20.30.2.1.1 |
fclPppPstnLpLogPortIdLP idro INTEGER .1.3.6.1.4.1.866.20.1.20.30.2.1.1.1 |
fclPppPstnLpInterfaceIdIF id (de type ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.30.2.1.1.2 |
fclPppPstnLpLocalSubscriberNbNumero d'abonnerw OCTET STRING .1.3.6.1.4.1.866.20.1.20.30.2.1.1.3 |
fclPppPstnLpConfigIdConfig PPP idrw INTEGER .1.3.6.1.4.1.866.20.1.20.30.2.1.1.10 |
fclPppPstnRemotePeerTable SEQUENCE OF FclPppPstnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.30.2.2 |
fclPppPstnRemotePeerEntryAn entry of fclPppPstnRemotePeerTable. FclPppPstnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.30.2.2.1 |
fclPppPstnRemX121AddrAdresse X121ro OCTET STRING .1.3.6.1.4.1.866.20.1.20.30.2.2.1.1 |
fclPppPstnRemStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.2.2.1.2 |
fclPppPstnRemPstnNumberNumero RTCrw OCTET STRING .1.3.6.1.4.1.866.20.1.20.30.2.2.1.3 |
fclPppBIsdnAccess OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.30.3 |
fclPppBIsdnLogPortTable SEQUENCE OF FclPppBIsdnLogPortEntry .1.3.6.1.4.1.866.20.1.20.30.3.1 |
fclPppBIsdnLogPortEntryAn entry of fclPppBIsdnLogPortTable. FclPppBIsdnLogPortEntry .1.3.6.1.4.1.866.20.1.20.30.3.1.1 |
fclPppBIsdnLpLogPortIdLP idro INTEGER .1.3.6.1.4.1.866.20.1.20.30.3.1.1.1 |
fclPppBIsdnLpIsdnInterfaceIdIF id (de type RNIS S0)rw INTEGER .1.3.6.1.4.1.866.20.1.20.30.3.1.1.2 |
fclPppBIsdnLocalBriTable SEQUENCE OF FclPppBIsdnLocalBriEntry .1.3.6.1.4.1.866.20.1.20.30.3.2 |
fclPppBIsdnLocalBriEntryAn entry of fclPppBIsdnLocalBriTable. FclPppBIsdnLocalBriEntry .1.3.6.1.4.1.866.20.1.20.30.3.2.1 |
fclPppBIsdnBriIdIF id (de type RNIS S0)ro INTEGER .1.3.6.1.4.1.866.20.1.20.30.3.2.1.1 |
fclPppBIsdnBriStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.3.2.1.2 |
fclPppBIsdnBriLocalSubsNb1Numero d'abonne 1rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.30.3.2.1.3 |
fclPppBIsdnBriLocalSubsNb2Numero d'abonne 2rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.30.3.2.1.4 |
fclPppBIsdnRemotePeerTable SEQUENCE OF FclPppBIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.30.3.3 |
fclPppBIsdnRemotePeerEntryAn entry of fclPppBIsdnRemotePeerTable. FclPppBIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.30.3.3.1 |
fclPppBIsdnRemX121AddrAdresse X121ro OCTET STRING .1.3.6.1.4.1.866.20.1.20.30.3.3.1.1 |
fclPppBIsdnRemPeerIdInterface RNIS distante idro INTEGER .1.3.6.1.4.1.866.20.1.20.30.3.3.1.2 |
fclPppBIsdnRemStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.3.3.1.3 |
fclPppBIsdnRemConfigIdConfig PPP idrw INTEGER .1.3.6.1.4.1.866.20.1.20.30.3.3.1.4 |
fclPppBIsdnRemPriorityPrioriterw INTEGER .1.3.6.1.4.1.866.20.1.20.30.3.3.1.5 |
fclPppBIsdnRemCallRetryCountNb de tentatives appelrw INTEGER .1.3.6.1.4.1.866.20.1.20.30.3.3.1.6 |
fclPppBIsdnRemLinkCheckPeriodPeriode de surveillance jonction (msec)rw INTEGER .1.3.6.1.4.1.866.20.1.20.30.3.3.1.7 |
fclPppBIsdnRemCheckPeriodCountConfirmation au bout de n periodesrw INTEGER .1.3.6.1.4.1.866.20.1.20.30.3.3.1.8 |
fclPppBIsdnLocalPriTable SEQUENCE OF FclPppBIsdnLocalPriEntry .1.3.6.1.4.1.866.20.1.20.30.3.4 |
fclPppBIsdnLocalPriEntryAn entry of fclPppBIsdnLocalPriTable. FclPppBIsdnLocalPriEntry .1.3.6.1.4.1.866.20.1.20.30.3.4.1 |
fclPppBIsdnPriIdIF id (de type RNIS S2)ro INTEGER .1.3.6.1.4.1.866.20.1.20.30.3.4.1.1 |
fclPppBIsdnPriStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.3.4.1.2 |
fclPppBIsdnPriLocalSubsNumero d'abonnerw DisplayString .1.3.6.1.4.1.866.20.1.20.30.3.4.1.3 |
fclPppConfig OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.30.10 |
fclPppConfigurationsTable SEQUENCE OF FclPppConfigurationsEntry .1.3.6.1.4.1.866.20.1.20.30.10.10 |
fclPppConfigurationsEntryAn entry of fclPppConfigurationsTable. FclPppConfigurationsEntry .1.3.6.1.4.1.866.20.1.20.30.10.10.1 |
fclPppCfgConfigIdConfig PPP idro INTEGER .1.3.6.1.4.1.866.20.1.20.30.10.10.1.1 |
fclPppCfgStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.10.10.1.2 |
fclPppCfgDescriptionDescriptionrw DisplayString .1.3.6.1.4.1.866.20.1.20.30.10.10.1.3 |
fclPppCfgLcpMagicNumberLCP Utilisation du Magic Numberrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.10.10.1.10 |
fclPppCfgLcpLocalMruLCP Local Maximum Receive Unitrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.10.10.1.11 |
fclPppCfgLcpLocalMtuLCP Local Maximum Transmit Unitrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.10.10.1.12 |
fclPppCfgNcpBridgeBridge NCPrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.10.10.1.20 |
fclPppCfgNcpIpIP NCPrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.10.10.1.25 |
fclPppCfgNcpIpxIPX NCPrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.10.10.1.30 |
fclPppCfgNcpClnpCLNP NCPrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.10.10.1.35 |
fclPppCfgAuthenticationOption authentificationrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.10.10.1.40 |
fclPppCfgAuthenticationModeMode authentificationrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.10.10.1.41 |
fclPppCfgIpAddrAssignmentOption adresse IP dynamiquerw Enumeration .1.3.6.1.4.1.866.20.1.20.30.10.10.1.42 |
fclPppConfigTimersTable SEQUENCE OF FclPppConfigTimersEntry .1.3.6.1.4.1.866.20.1.20.30.10.11 |
fclPppConfigTimersEntryAn entry of fclPppConfigTimersTable. FclPppConfigTimersEntry .1.3.6.1.4.1.866.20.1.20.30.10.11.1 |
fclPppCftConfigIdConfig PPP idro INTEGER .1.3.6.1.4.1.866.20.1.20.30.10.11.1.1 |
fclPppCftLcpEchoRequestPeriodPeriode d'emission des echo requests LCPrw INTEGER .1.3.6.1.4.1.866.20.1.20.30.10.11.1.10 |
fclPppCftConnectionTimerTemporisateur de surveillancerw INTEGER .1.3.6.1.4.1.866.20.1.20.30.10.11.1.20 |
fclPppCftRestartTimerTempo de reemission des messagesrw INTEGER .1.3.6.1.4.1.866.20.1.20.30.10.11.1.21 |
fclPppCftConfigureMaxCountNombre max de retransmission des configure requestrw INTEGER .1.3.6.1.4.1.866.20.1.20.30.10.11.1.22 |
fclPppCftTerminateMaxCountNombre max de retransmission des terminate requestrw INTEGER .1.3.6.1.4.1.866.20.1.20.30.10.11.1.23 |
fclPppCftFailureMaxCountNombre max de retransmission des configure nakrw INTEGER .1.3.6.1.4.1.866.20.1.20.30.10.11.1.24 |
fclPppConfigAuthentication OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.30.10.20 |
fclPppCfaLocalIdentifierIdentite de l'equipement localrw DisplayString .1.3.6.1.4.1.866.20.1.20.30.10.20.1 |
fclPppCfaLocalPasswordMot de passe de l'equipement localrw DisplayString .1.3.6.1.4.1.866.20.1.20.30.10.20.2 |
fclPppCfaRemotePeerTable SEQUENCE OF FclPppCfaRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.30.10.20.10 |
fclPppCfaRemotePeerEntryAn entry of fclPppCfaRemotePeerTable. FclPppCfaRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.30.10.20.10.1 |
fclPppCfaRemPeerIdDistant Idro INTEGER .1.3.6.1.4.1.866.20.1.20.30.10.20.10.1.1 |
fclPppCfaRemStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.30.10.20.10.1.2 |
fclPppCfaRemIdentifierIdentite de l'equipement distantrw DisplayString .1.3.6.1.4.1.866.20.1.20.30.10.20.10.1.3 |
fclPppCfaRemPasswordMot de passe de l'equipement distantrw DisplayString .1.3.6.1.4.1.866.20.1.20.30.10.20.10.1.4 |
fclFrameRelay OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.40 |
fclFrCommunicationEquipment OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.40.1 |
fclFrCeLogPortTable SEQUENCE OF FclFrCeLogPortEntry .1.3.6.1.4.1.866.20.1.20.40.1.1 |
fclFrCeLogPortEntryAn entry of fclFrCeLogPortTable. FclFrCeLogPortEntry .1.3.6.1.4.1.866.20.1.20.40.1.1.1 |
fclFrCeLpLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.1.1.1.1 |
fclFrCeLpInterfaceIdIF Id (type ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.1.1.1.2 |
fclFrCeLpLocalAddressAdresse de localisation sur le plan d'adressage du
routage (Numero d'abonne)rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.40.1.1.1.5 |
fclFrCeLpConfigIdConfiguration FR-CErw INTEGER .1.3.6.1.4.1.866.20.1.20.40.1.1.1.10 |
fclFrCeLpLmiLMIrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.1.1.1.11 |
fclFrCeParGenTable SEQUENCE OF FclFrCeParGenEntry .1.3.6.1.4.1.866.20.1.20.40.1.2 |
fclFrCeParGenEntryAn entry of fclFrCeParGenTable. FclFrCeParGenEntry .1.3.6.1.4.1.866.20.1.20.40.1.2.1 |
fclFrCeParGenLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.1.2.1.1 |
fclFrCeParGenDlcSetupAlarmThresholdA% Seuil alarmique d'acceptation des connexions
(pourcentage du debit de la ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.1.2.1.30 |
fclFrCeParGenDlcSetupDiscardThresholdR% Seuil de refus d'etablissement des DLC VBR-NRT
(pourcentage du debit de la ligne : 100 = pas de
surbooking)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.1.2.1.31 |
fclFrCeParGenBookingUbrThresholdU% Bande passante reservee aux reseaux virtuels
UBR (pourcentage du debit de la ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.1.2.1.32 |
fclFrCeParGenBookingVbrRtThresholdV% Bande passante reservee aux COS VBR-RT
(pourcentage du debit de la ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.1.2.1.33 |
fclFrCeParGenVoiceMaxTransitDelayPDN transit delayrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.1.2.1.34 |
fclFrTerminalEquipment OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.40.2 |
fclFrTeLogPortTable SEQUENCE OF FclFrTeLogPortEntry .1.3.6.1.4.1.866.20.1.20.40.2.1 |
fclFrTeLogPortEntryAn entry of fclFrTeLogPortTable. FclFrTeLogPortEntry .1.3.6.1.4.1.866.20.1.20.40.2.1.1 |
fclFrTeLpLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.1.1.1 |
fclFrTeLpInterfaceIdIF Id (type ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.1.1.2 |
fclFrTeLpLocalAddressAdresse de localisation sur le plan d'adressage du
routage (Numero d'abonne)rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.40.2.1.1.5 |
fclFrTeLpConfigIdConfiguration FR-TErw INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.1.1.10 |
fclFrTeLpLmiLMIrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.2.1.1.11 |
fclFrTeLpFragmentationSegmentationrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.2.1.1.20 |
fclFrTeLpLinkLayerConsolidationCLLMrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.2.1.1.21 |
fclFrTeLpLogPortBackupEnablingSecoursrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.2.1.1.22 |
fclFrTeLpFragFrameSizeTaille des trames pour la Segmentationrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.2.1.1.23 |
fclFrTeLpBackupTimerTempo de retour su LSrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.1.1.25 |
fclFrTeParGenTable SEQUENCE OF FclFrTeParGenEntry .1.3.6.1.4.1.866.20.1.20.40.2.4 |
fclFrTeParGenEntryAn entry of fclFrTeParGenTable. FclFrTeParGenEntry .1.3.6.1.4.1.866.20.1.20.40.2.4.1 |
fclFrTeParGenLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.4.1.1 |
fclFrTeParGenDlcSetupAlarmThresholdA% Seuil alarmique d'acceptation des connexions
(pourcentage du debit de la ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.4.1.30 |
fclFrTeParGenDlcSetupDiscardThresholdR% Seuil de refus d'etablissement des DLC VBR-NRT
(pourcentage du debit de la ligne : 100 = pas de
surbooking)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.4.1.31 |
fclFrTeParGenBookingUbrThresholdU% Bande passante reservee aux reseaux virtuels
UBR (pourcentage du debit de la ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.4.1.32 |
fclFrTeParGenBookingVbrRtThresholdV% Bande passante reservee aux COS VBR-RT
(pourcentage du debit de la ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.4.1.33 |
fclFrTeParGenVoiceMaxTransitDelayPDN transit delayrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.4.1.34 |
fclFrTeParGenDynamicEirThe value 'off' of this object means the Burst
Exceeded object configuration is used in the
traffic management plan with respect agreement
traffic. The value 'on' of this object allows the
whole connection to have a fair share of the line
bandwidth in the proportion of the Commited
Information Rate. In this case, the Burst Exceeded
used in the traffic control is made dynamically
from the unloaded line in the prorata of the CIR.
The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.40.2.4.1.35 |
fclFrTeParGenPredictionRoundTripDelayPrediction du delai de propagationrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.4.1.36 |
fclFrTeParGenNetworkBandwidthBande passante du reseaurw INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.4.1.37 |
fclFrTeIsdnBackupTable SEQUENCE OF FclFrTeIsdnBackupEntry .1.3.6.1.4.1.866.20.1.20.40.2.11 |
fclFrTeIsdnBackupEntryAn entry of fclFrTeIsdnBackupTable. FclFrTeIsdnBackupEntry .1.3.6.1.4.1.866.20.1.20.40.2.11.1 |
fclFrTeIsdnBackLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.11.1.1 |
fclFrTeIsdnBackIsdnInterfaceIdInterface RNIS locale idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.11.1.2 |
fclFrTeIsdnBackStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.2.11.1.3 |
fclFrTeIsdnRemotePeerTable SEQUENCE OF FclFrTeIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.40.2.12 |
fclFrTeIsdnRemotePeerEntryAn entry of fclFrTeIsdnRemotePeerTable. FclFrTeIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.40.2.12.1 |
fclFrTeIsdnRemLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.12.1.1 |
fclFrTeIsdnRemRemotePeerIdInterfaceRNIS distante idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.12.1.2 |
fclFrTeIsdnRemStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.2.12.1.3 |
fclFrTeIsdnRemPriorityPrioriterw INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.12.1.8 |
fclFrTeIsdnRemCallRetryCountNombre de tentatives d'appelrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.12.1.9 |
fclFrTeIsdnRemProtocolType de protocolerw Enumeration .1.3.6.1.4.1.866.20.1.20.40.2.12.1.15 |
fclFrTeIsdnRemConfigIdConfiguration idrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.2.12.1.16 |
fclFrSwitchEquipment OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.40.3 |
fclFrSeLogPortTable SEQUENCE OF FclFrSeLogPortEntry .1.3.6.1.4.1.866.20.1.20.40.3.1 |
fclFrSeLogPortEntryAn entry of fclFrSeLogPortTable. FclFrSeLogPortEntry .1.3.6.1.4.1.866.20.1.20.40.3.1.1 |
fclFrSeLpLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.3.1.1.1 |
fclFrSeLpInterfaceIdIF Id (type ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.3.1.1.2 |
fclFrSeLpConfigIdConfiguration FR-SErw INTEGER .1.3.6.1.4.1.866.20.1.20.40.3.1.1.10 |
fclFrSeLpLogPortBackupEnablingSecoursrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.3.1.1.22 |
fclFrSeLpBackupTimerTempo de retour sur LSrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.3.1.1.25 |
fclFrSeIsdnBackupTable SEQUENCE OF FclFrSeIsdnBackupEntry .1.3.6.1.4.1.866.20.1.20.40.3.11 |
fclFrSeIsdnBackupEntryAn entry of fclFrSeIsdnBackupTable. FclFrSeIsdnBackupEntry .1.3.6.1.4.1.866.20.1.20.40.3.11.1 |
fclFrSeIsdnBackLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.3.11.1.1 |
fclFrSeIsdnBackIsdnInterfaceIdInterface RNIS locale idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.3.11.1.2 |
fclFrSeIsdnBackStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.3.11.1.3 |
fclFrSeIsdnRemotePeerTable SEQUENCE OF FclFrSeIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.40.3.12 |
fclFrSeIsdnRemotePeerEntryAn entry of fclFrSeIsdnRemotePeerTable. FclFrSeIsdnRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.40.3.12.1 |
fclFrSeIsdnRemLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.3.12.1.1 |
fclFrSeIsdnRemRemotePeerIdInterface RNIS distante idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.3.12.1.2 |
fclFrSeIsdnRemStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.3.12.1.3 |
fclFrSeIsdnRemConfigIdConfiguration FR-SErw INTEGER .1.3.6.1.4.1.866.20.1.20.40.3.12.1.4 |
fclFrSeIsdnRemPriorityPrioriterw INTEGER .1.3.6.1.4.1.866.20.1.20.40.3.12.1.8 |
fclFrSeIsdnRemCallRetryCountNombre de tentatives d'appelrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.3.12.1.9 |
fclFrSeInBIsdn OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.40.13 |
fclFrSeInBIsdnLogPortTable SEQUENCE OF FclFrSeInBIsdnLogPortEntry .1.3.6.1.4.1.866.20.1.20.40.13.1 |
fclFrSeInBIsdnLogPortEntryAn entry of fclFrSeInBIsdnLogPortTable. FclFrSeInBIsdnLogPortEntry .1.3.6.1.4.1.866.20.1.20.40.13.1.1 |
fclFrSeInBLpLogPortIdLP Idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.13.1.1.1 |
fclFrSeInBLpIsdnInterfaceIdIF Id (type RNIS)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.13.1.1.2 |
fclFrSeInBRemotePeerTable SEQUENCE OF FclFrSeInBRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.40.13.2 |
fclFrSeInBRemotePeerEntryAn entry of fclFrSeInBRemotePeerTable. FclFrSeInBRemotePeerEntry .1.3.6.1.4.1.866.20.1.20.40.13.2.1 |
fclFrSeInBRemRemoteAddressAdresse viseero OCTET STRING .1.3.6.1.4.1.866.20.1.20.40.13.2.1.1 |
fclFrSeInBRemPeerIdInterface RNIS distante idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.13.2.1.2 |
fclFrSeInBRemStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.13.2.1.3 |
fclFrSeInBRemPriorityPrioriterw INTEGER .1.3.6.1.4.1.866.20.1.20.40.13.2.1.8 |
fclFrSeInBRemCallRetryCountNb de tentatives appelrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.13.2.1.9 |
fclFrSeInBRemConfigIdConfiguration FR-SErw INTEGER .1.3.6.1.4.1.866.20.1.20.40.13.2.1.10 |
fclFrPvcEndPoint OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.40.20 |
fclFrPvcEndPointTable SEQUENCE OF FclFrPvcEndPointEntry .1.3.6.1.4.1.866.20.1.20.40.20.1 |
fclFrPvcEndPointEntryAn entry of fclFrPvcEndPointTable. FclFrPvcEndPointEntry .1.3.6.1.4.1.866.20.1.20.40.20.1.1 |
fclFrPvcLinkTypeType de liaison (=logicalPort en v2.1)ro Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.1.1.1 |
fclFrPvcLinkIdLiaison Id (=LogPortId en v2.1)ro INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.1.1.2 |
fclFrPvcDlciDLCIro INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.1.1.3 |
fclFrPvcStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.1.1.4 |
fclFrPvcCalledAddressAdresse distante (non utilisee si encapsulation
X25)rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.40.20.1.1.5 |
fclFrPvcCallDirectionMode d'appel (non utilise si encapsulation X25)rw Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.1.1.6 |
fclFrPvcEncapsulationEncapsulationrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.1.1.7 |
fclFrPvcBackupEnablingTerminaison de PVC a secourirrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.1.1.10 |
fclFrPvcBackupDlciDLCI de secoursrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.1.1.11 |
fclFrPvcTrafficManagementStrategyTraffic management strategyrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.1.1.20 |
fclFrPvcNetworkTransportFR Network transportrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.1.1.21 |
fclFrPvcQualityOfServiceTable SEQUENCE OF FclFrPvcQualityOfServiceEntry .1.3.6.1.4.1.866.20.1.20.40.20.2 |
fclFrPvcQualityOfServiceEntryAn entry of fclFrPvcQualityOfServiceTable. FclFrPvcQualityOfServiceEntry .1.3.6.1.4.1.866.20.1.20.40.20.2.1 |
fclFrPvcQosLinkTypeType de liaison (=logicalPort en v2.1)ro Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.2.1.1 |
fclFrPvcQosLinkIdLiaison Id (=LogPortId en v2.1)ro INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.2.1.2 |
fclFrPvcQosDlciDLCIro INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.2.1.3 |
fclFrPvcQosCosCOSrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.2.1.5 |
fclFrPvcQosInBcEntrant BCrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.2.1.11 |
fclFrPvcQosInBeEntrant BErw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.2.1.12 |
fclFrPvcQosInCirEntrant CIRrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.2.1.13 |
fclFrPvcQosInMinCirEntrant CIR minirw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.2.1.14 |
fclFrPvcQosOutBcSortant BCrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.2.1.21 |
fclFrPvcQosOutBeSortant BErw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.2.1.22 |
fclFrPvcQosOutCirSortant CIRrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.2.1.23 |
fclFrPvcQosOutMinCirSortant CIR minirw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.2.1.24 |
fclFrPvcX25EncapsulationTable SEQUENCE OF FclFrPvcX25EncapsulationEntry .1.3.6.1.4.1.866.20.1.20.40.20.10 |
fclFrPvcX25EncapsulationEntryAn entry of fclFrPvcX25EncapsulationTable. FclFrPvcX25EncapsulationEntry .1.3.6.1.4.1.866.20.1.20.40.20.10.1 |
fclFrPvcX25LinkTypeType de liaison (=logicalPort en v2.1)ro Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.10.1.1 |
fclFrPvcX25LinkIdLiaison Id (=LogPortId en v2.1)ro INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.10.1.2 |
fclFrPvcX25DlciDLCIro INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.10.1.3 |
fclFrPvcX25AssociatedAddressAdresse associeerw OCTET STRING .1.3.6.1.4.1.866.20.1.20.40.20.10.1.5 |
fclFrPvcX25InterNodeConfigIdConfiguration X25rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.10.1.10 |
fclFrPvcSnaEncapsulationTable SEQUENCE OF FclFrPvcSnaEncapsulationEntry .1.3.6.1.4.1.866.20.1.20.40.20.11 |
fclFrPvcSnaEncapsulationEntryAn entry of fclFrPvcSnaEncapsulationTable. FclFrPvcSnaEncapsulationEntry .1.3.6.1.4.1.866.20.1.20.40.20.11.1 |
fclFrPvcSnaLinkTypeType de liaison (=logicalPort en v2.1)ro Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.11.1.1 |
fclFrPvcSnaLinkIdLiaison Id (=LogPortId en v2.1)ro INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.11.1.2 |
fclFrPvcSnaDlciDLCIro INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.11.1.3 |
fclFrPvcSnaConnTestEnablingInitiative d'etablissement de connexion par une
trame testrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.11.1.5 |
fclFrPvcSnaLevel3PidL3 PIDrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.11.1.10 |
fclFrPvcSnaDestinationSapDSAPrw OCTET STRING .1.3.6.1.4.1.866.20.1.20.40.20.11.1.11 |
fclFrPvcSnaSourceSapSSAPrw OCTET STRING .1.3.6.1.4.1.866.20.1.20.40.20.11.1.12 |
fclFrPvcSnaT1ReplyTimerTimer T1 attente une trame Urw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.11.1.20 |
fclFrPvcSnaN2RetryCountN2 Nombre maximum de retransmissionsrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.11.1.21 |
fclFrPvcSnaT2ReceiverAckTimerTimer T2 acquittement des trames Irw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.11.1.22 |
fclFrPvcSnaN3AcknowledgedCountN3 Nombre de trames ok avant acquittementrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.11.1.23 |
fclFrPvcSnaNwIncrementAckCountNW congestion : nombre de trames ok avant
incrementer la fenetre de travailrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.11.1.24 |
fclFrPvcSnaTwTransmitWinSizeTW Fenetre en emissionrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.11.1.25 |
fclFrPvcSnaRwReceiveWinSizeRW fenetre receptionrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.11.1.26 |
fclFrSnaBan OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.40.20.12 |
fclFrNbStationDlci OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.40.20.12.1 |
fclFrNbStationByDlciNombre de stations par DLCI BAN Frontalrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.12.1.1 |
fclFrPvcSnaBanEncapsulationTable SEQUENCE OF FclFrPvcSnaBanEncapsulationEntry .1.3.6.1.4.1.866.20.1.20.40.20.12.10 |
fclFrPvcSnaBanEncapsulationEntryAn entry of fclFrPvcSnaBanEncapsulationTable. FclFrPvcSnaBanEncapsulationEntry .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1 |
fclFrPvcSnaBanLinkTypeType de liaison (=logicalPort en v2.1)ro Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.1 |
fclFrPvcSnaBanLinkIdLiaison Id (=LogPortId en v2.1)ro INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.2 |
fclFrPvcSnaBanDlciDLCIro INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.3 |
fclFrPvcSnaBanPuIdPu idrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.10 |
fclFrPvcSnaBanConnTestEnablingInitiative d'etablissement de connexion par une
trame testrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.11 |
fclFrPvcSnaBanLinkType de lignerw Enumeration .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.12 |
fclFrPvcSnaBanT1ReplyTimerTimer T1 attente une trame Urw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.20 |
fclFrPvcSnaBanN2RetryCountN2 Nombre maximum de retransmissionsrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.21 |
fclFrPvcSnaBanT2ReceiverAckTimerTimer T2 acquittement des trames Irw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.22 |
fclFrPvcSnaBanN3AcknowledgedCountN3 Nombre de trames ok avant acquittementrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.23 |
fclFrPvcSnaBanNwIncrementAckCountNW congestion : nombre de trames ok avant
incrementer la fenetre de travailrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.24 |
fclFrPvcSnaBanTwTransmitWinSizeTW Fenetre en emissionrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.25 |
fclFrPvcSnaBanRwReceiveWinSizeRW fenetre receptionrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.26 |
fclFrPvcSnaBanMinRecallTimerMinimum recall timerrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.20.12.10.1.27 |
fclFrPvcSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.40.25 |
fclFrPvcTunEndPointTable SEQUENCE OF FclFrPvcTunEndPointEntry .1.3.6.1.4.1.866.20.1.20.40.25.1 |
fclFrPvcTunEndPointEntryAn entry of fclFrPvcTunEndPointTable. FclFrPvcTunEndPointEntry .1.3.6.1.4.1.866.20.1.20.40.25.1.1 |
fclFrPvcTunLinkTypeType de liaison (=logicalPort en v2.1)ro Enumeration .1.3.6.1.4.1.866.20.1.20.40.25.1.1.1 |
fclFrPvcTunLinkIdLiaison Id (=LogPortId en v2.1)ro INTEGER .1.3.6.1.4.1.866.20.1.20.40.25.1.1.2 |
fclFrPvcTunDlciDLCIro INTEGER .1.3.6.1.4.1.866.20.1.20.40.25.1.1.3 |
fclFrPvcTunStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.25.1.1.4 |
fclFrPvcTunInCirEntrant CIRrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.25.1.1.5 |
fclFrPvcTunOutCirSortant CIRrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.25.1.1.6 |
fclFrPvcTunBackupEnablingTerminaison de PVC a secourirrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.25.1.1.10 |
fclFrPvcTunBackupDlciDLCI de secoursrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.25.1.1.11 |
fclFrPvcTunAssociatedAddressAdresse associeerw OCTET STRING .1.3.6.1.4.1.866.20.1.20.40.25.1.1.15 |
fclFrPvcTunFrseConfigurationConfiguration FRSErw INTEGER .1.3.6.1.4.1.866.20.1.20.40.25.1.1.20 |
fclFrameRelayBackup OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.40.27 |
fclFrBackupTable SEQUENCE OF FclFrBackupEntry .1.3.6.1.4.1.866.20.1.20.40.27.1 |
fclFrBackupEntryAn entry of fclFrBackupTable. FclFrBackupEntry .1.3.6.1.4.1.866.20.1.20.40.27.1.1 |
fclFrMainLPIdLP principalero INTEGER .1.3.6.1.4.1.866.20.1.20.40.27.1.1.1 |
fclFrMainDlciDLCI principalro INTEGER .1.3.6.1.4.1.866.20.1.20.40.27.1.1.2 |
fclFrBackupLPIdLP secoursro INTEGER .1.3.6.1.4.1.866.20.1.20.40.27.1.1.3 |
fclFrBackupDlciDLCI secoursro INTEGER .1.3.6.1.4.1.866.20.1.20.40.27.1.1.4 |
fclFrBackupStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.27.1.1.5 |
fclFrConfigurationCeTe OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.40.30 |
fclFrConfigCeTeTable SEQUENCE OF FclFrConfigCeTeEntry .1.3.6.1.4.1.866.20.1.20.40.30.1 |
fclFrConfigCeTeEntryAn entry of fclFrConfigCeTeTable. FclFrConfigCeTeEntry .1.3.6.1.4.1.866.20.1.20.40.30.1.1 |
fclFrCfcConfigIdConfiguration idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.1.1.1 |
fclFrCfcStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.30.1.1.2 |
fclFrCfcDescriptionDescriptionrw DisplayString .1.3.6.1.4.1.866.20.1.20.40.30.1.1.3 |
fclFrCfcProfileIdThe value of this object is the profile number
used to automatically valorize all the FR
parameters in an entry of the two tables which
composes FR-CE or FR-TE configurations (see
fclFrCfcConfigId).
The possible values are :
84 FRTE interface,
85 FRCE interface,
If it is unused, the value of this parameter is
'255'.
The default value is '85' (meaning that default
values of FR parameters are those pre-defined in
profile number 85).rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.1.1.4 |
fclFrCfcModificationCountNombre de parametres modifies par rapport au profilro INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.1.1.5 |
fclFrCfcGeneralParameterTable SEQUENCE OF FclFrCfcGeneralParameterEntry .1.3.6.1.4.1.866.20.1.20.40.30.10 |
fclFrCfcGeneralParameterEntryAn entry of fclFrCfcGeneralParameterTable. FclFrCfcGeneralParameterEntry .1.3.6.1.4.1.866.20.1.20.40.30.10.1 |
fclFrCfcGenConfigIdConfiguration idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.10.1.1 |
fclFrCfcGenMinimumRecallTimerTempo de slow call (Tsc) en secondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.10.1.20 |
fclFrCfcGenInactivityCheckDelayInactivity check delay (Ta) en minutesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.10.1.21 |
fclFrCfcGenInactivityTimerInactivity timer (Tb) en secondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.10.1.22 |
fclFrCfcGenUnuseTimerTempo 0 CV en secondes (0 = pas de surveillance)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.10.1.23 |
fclFrCfcGenSVCSVCrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.30.10.1.24 |
fclFrCfcSignallingParameterTable SEQUENCE OF FclFrCfcSignallingParameterEntry .1.3.6.1.4.1.866.20.1.20.40.30.15 |
fclFrCfcSignallingParameterEntryAn entry of fclFrCfcSignallingParameterTable. FclFrCfcSignallingParameterEntry .1.3.6.1.4.1.866.20.1.20.40.30.15.1 |
fclFrCfcSigConfigIdConfiguration idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.15.1.1 |
fclFrCfcSigOuputTimeoutTempo de surveillance de ligne en emission en
millisecondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.15.1.2 |
fclFrCfcSigSignalOutputWinSizeFenetre d'emission DLCI de signalisationrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.15.1.3 |
fclFrCfcSigN200RetransMaxCountN 200 : Nombre de repetition tramesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.15.1.5 |
fclFrCfcSigT200RetransTimerT 200 : Tempo de retransmission en millisecondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.15.1.6 |
fclFrCfcSigT203InactivityTimerT 203 : Polling RR en secondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.15.1.7 |
fclFrCfcSigConversionAimedPointConversion adresse : point viserw Enumeration .1.3.6.1.4.1.866.20.1.20.40.30.15.1.10 |
fclFrCfcSigT303SetupResponseTimerT 303 : Tempo attente de reponse a un
etablissement sortant en secondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.15.1.11 |
fclFrCfcSigT305DisconnectResponseTimerT 305 : Tempo attente de reponse a une demande de
deconnexion en secondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.15.1.12 |
fclFrCfcSigT308ReleaseResponseTimerT 308 : Tempo attente de reponse a une demande de
liberation en secondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.15.1.13 |
fclFrCfcSigT310CallProceedingTimerT 310 : Tempo entre un appel recu et une alerte ou
une connexion en secondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.15.1.15 |
fclFrCfcSigT316RestartAcknowledgeTimerT 316 : Tempo de reponse au RESTART en secondes (0
= pas de RESTART)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.15.1.17 |
fclFrCfcEiCodingTable SEQUENCE OF FclFrCfcEiCodingEntry .1.3.6.1.4.1.866.20.1.20.40.30.16 |
fclFrCfcEiCodingEntryAn entry of fclFrCfcEiCodingTable. FclFrCfcEiCodingEntry .1.3.6.1.4.1.866.20.1.20.40.30.16.1 |
fclFrCfcEiCodConfigIdConfiguration idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.16.1.1 |
fclFrCfcEiCodCalledTypNumCalled Type of numberrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.30.16.1.2 |
fclFrCfcEiCodCalledNumPlanIdCalled Numbering plan identificationrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.30.16.1.3 |
fclFrCfcEiCodCallingTypNumCalling Type of numberrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.30.16.1.4 |
fclFrCfcEiCodCallingNumPlanIdCalling Numbering plan identificationrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.30.16.1.5 |
fclFrCfcLmiParameterTable SEQUENCE OF FclFrCfcLmiParameterEntry .1.3.6.1.4.1.866.20.1.20.40.30.21 |
fclFrCfcLmiParameterEntryAn entry of fclFrCfcLmiParameterTable. FclFrCfcLmiParameterEntry .1.3.6.1.4.1.866.20.1.20.40.30.21.1 |
fclFrCfcLmiConfigIdConfiguration idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.21.1.1 |
fclFrCfcLmiDlciDLCI utiliserw Enumeration .1.3.6.1.4.1.866.20.1.20.40.30.21.1.2 |
fclFrCfcLmiStandardStandard LMIrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.30.21.1.3 |
fclFrCfcLmiAccessibilityConditionCritere de disponibiliterw Enumeration .1.3.6.1.4.1.866.20.1.20.40.30.21.1.4 |
fclFrCfcLmiN391FullStatusPollCountN 391 (User) Cycle interrogation prealablerw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.21.1.5 |
fclFrCfcLmiN392ErrorThresholdN 392 (User/Net) Seuil erreurrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.21.1.6 |
fclFrCfcLmiN393MonitoredEventCountN393 (User/Net) Compteur des evenements controlesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.21.1.7 |
fclFrCfcLmiT391LinkIntegPollTimerT 391 (User) Tempo de polling statusrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.21.1.8 |
fclFrCfcLmiT392PollingVerifTimerT 392 (Net) Tempo attente de la demande etatrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.30.21.1.9 |
fclFrCfcLmiAsynchronousStatusReportEnvoi du status asynchronerw Enumeration .1.3.6.1.4.1.866.20.1.20.40.30.21.1.10 |
fclFrConfigurationSe OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.40.40 |
fclFrConfigSeTable SEQUENCE OF FclFrConfigSeEntry .1.3.6.1.4.1.866.20.1.20.40.40.1 |
fclFrConfigSeEntryAn entry of fclFrConfigSeTable. FclFrConfigSeEntry .1.3.6.1.4.1.866.20.1.20.40.40.1.1 |
fclFrCfsConfigIdConfiguration idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.1.1.1 |
fclFrCfsStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.40.1.1.2 |
fclFrCfsDescriptionDescriptionrw DisplayString .1.3.6.1.4.1.866.20.1.20.40.40.1.1.3 |
fclFrCfsProfileIdThe value of this object is the profile number
used to automatically valorize all the FR
parameters in an entry of the two tables which
composes FR-SE configurations (see
fclFrCfsConfigId).
The possible values are :
80 FRSE interface.
If it is unused, the value of this parameter is
'255'.
The default value is '80' (meaning that default
values of FR parameters are those pre-defined in
profile number 80).rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.1.1.4 |
fclFrCfsModificationCountNombre de parametres modifies par rapport au profilro INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.1.1.5 |
fclFrCfsGeneralParameterTable SEQUENCE OF FclFrCfsGeneralParameterEntry .1.3.6.1.4.1.866.20.1.20.40.40.10 |
fclFrCfsGeneralParameterEntryAn entry of fclFrCfsGeneralParameterTable. FclFrCfsGeneralParameterEntry .1.3.6.1.4.1.866.20.1.20.40.40.10.1 |
fclFrCfsGenConfigIdConfiguration idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.10.1.1 |
fclFrCfsGenCallReturnTransmissionRetour d'appelrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.40.10.1.15 |
fclFrCfsGenUnuseTimerTempo 0 CV en secondes (0 = pas de surveillance)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.10.1.20 |
fclFrCfsGenDlcSetupAlarmThresholdA% Seuil alarmique d'acceptation des connexions
(pourcentage du debit de la ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.10.1.30 |
fclFrCfsGenDlcSetupDiscardThresholdR% Seuil de refus d'etablissement des DLC VBR-NRT
(pourcentage du debit de la ligne : 100 = pas de
surbooking)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.10.1.31 |
fclFrCfsGenBookingUbrThresholdU% Bande passante reservee aux reseaux virtuels
UBR (pourcentage du debit de la ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.10.1.32 |
fclFrCfsGenBookingVbrRtThresholdV% Bande passante reservee aux COS VBR-RT
(pourcentage du debit de la ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.10.1.33 |
fclFrCfsGenBehaviorType de comportementrw Enumeration .1.3.6.1.4.1.866.20.1.20.40.40.10.1.40 |
fclFrCfsGenDynamicEirThe value 'off' of this object means the Burst
Exceeded object configuration is used in the
traffic management plan with respect agreement
traffic. The value 'on' of this object allows the
whole connection to have a fair share of the line
bandwidth in the proportion of the Commited
Information Rate. In this case, the Burst Exceeded
used in the traffic control is made dynamically
from the unloaded line in the prorata of the CIR.
The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.40.40.10.1.41 |
fclFrCfsGenPredictionRoundTripDelayPrediction du delai de propagationrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.10.1.42 |
fclFrCfsGenNetworkBandwidthBande passante du reseaurw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.10.1.43 |
fclFrCfsSignallingTable SEQUENCE OF FclFrCfsSignallingEntry .1.3.6.1.4.1.866.20.1.20.40.40.20 |
fclFrCfsSignallingEntryAn entry of fclFrCfsSignallingTable. FclFrCfsSignallingEntry .1.3.6.1.4.1.866.20.1.20.40.40.20.1 |
fclFrCfsSigConfigIdConfiguration idro INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.20.1.1 |
fclFrCfsSigOuputTimeoutTempo de surveillance de ligne en emission en
millisecondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.20.1.2 |
fclFrCfsSigSignalOutputWinSizeFenetre d'emission DLCI de signalisationrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.20.1.3 |
fclFrCfsSigN200RetransMaxCountN 200 : Nombre de repetition tramesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.20.1.5 |
fclFrCfsSigT200RetransTimerT 200 : Tempo de retransmission en millisecondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.20.1.6 |
fclFrCfsSigT203InactivityTimerT 203 : Polling RR en secondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.20.1.7 |
fclFrCfsSigT303SetupResponseTimerT 303 : Tempo attente de reponse a un
etablissement sortant en secondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.20.1.11 |
fclFrCfsSigT305DisconnectResponseTimerT 305 : Tempo attente de reponse a une demande de
deconnexion en secondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.20.1.12 |
fclFrCfsSigT308ReleaseResponseTimerT 308 : Tempo attente de reponse a une demande de
liberation en secondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.20.1.13 |
fclFrCfsSigT310CallProceedingTimerT 310 : Tempo entre un appel recu et une alerte ou
une connexion en secondesrw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.20.1.15 |
fclFrCfsSigT316RestartAcknowledgeTimerT 316 : Tempo de reponse au RESTART en secondes (0
= pas de RESTART)rw INTEGER .1.3.6.1.4.1.866.20.1.20.40.40.20.1.17 |
fclInterUnitLink OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.45 |
fclInterUnitLinkTable SEQUENCE OF FclInterUnitLinkEntry .1.3.6.1.4.1.866.20.1.20.45.1 |
fclInterUnitLinkEntryAn entry of fclInterUnitLinkTable. FclInterUnitLinkEntry .1.3.6.1.4.1.866.20.1.20.45.1.1 |
fclIulLogPortIdLP idro INTEGER .1.3.6.1.4.1.866.20.1.20.45.1.1.1 |
fclIulInterfaceIdIF id (type LIU)rw INTEGER .1.3.6.1.4.1.866.20.1.20.45.1.1.2 |
fclIulCallReturnTransmissionAutorisation retour d'appelrw Enumeration .1.3.6.1.4.1.866.20.1.20.45.1.1.5 |
fclIulConversionAimedPointConversion adresse : point viserw Enumeration .1.3.6.1.4.1.866.20.1.20.45.1.1.10 |
fclIulConversionIncomingCallConversion d'adresse sur appel entrantrw Enumeration .1.3.6.1.4.1.866.20.1.20.45.1.1.11 |
fclIulConversionOutgoingCallConversion adresse sur appel sortantrw Enumeration .1.3.6.1.4.1.866.20.1.20.45.1.1.12 |
fclIulConversionAddressCheckConversion adresse : controle de la presence dans
les tables de conversionrw Enumeration .1.3.6.1.4.1.866.20.1.20.45.1.1.13 |
fclX25Configurations OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.50 |
fclX25ConfigAccess OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.50.1 |
fclX25ConfigAccessTableThis table contains the X25 access configurations
used by X25 access links. SEQUENCE OF FclX25ConfigAccessEntry .1.3.6.1.4.1.866.20.1.20.50.1.1 |
fclX25ConfigAccessEntryAn entry of fclX25ConfigAccessTable. FclX25ConfigAccessEntry .1.3.6.1.4.1.866.20.1.20.50.1.1.1 |
fclX25CfaConfigIdThe value of this object identifies one and only
one X25 access configuration. This configuration
may be referenced by fclX25AccX25AccessConfigId,
fclX25InDX25AccessConfigId,
fclX25InDIsdnRemX25AccConfigId or
fclX25InBRemX25ConfigId.
The possible values are : '0..199. If it is
unused, the value of this parameter is '255'.
The X25 access configuration parameters are
described in :
fclX25CfaDataLinkNetworkTable : data link and
network levels,
fclX25CfaFacilityTable : facility level,
fclX25CfaNegotiatedFacilityTable : facility
level (negotiaitions),
fclX25CfaSignallingTable : signalling level,
fclX25CfaServiceTable : services level.
When creating a new configuration each parameter
takes its default value. Setting a profile allows
the user to fill all the parameters with values
pre-defined in this profile but each one may also
be individually modified.ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.1.1.1 |
fclX25CfaStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.1.1.2 |
fclX25CfaDescriptionThe value of this object stores a text description
of the X25 access configuration elaborated by the
user. This description may contains from 0 to 32
characters. The default value is 'Subscriber with
facilities'.rw DisplayString .1.3.6.1.4.1.866.20.1.20.50.1.1.1.3 |
fclX25CfaProfileIdThe value of this object is the profile number
used to automatically valorize all the X25
parameters in an entry of the five tables which
composes X25 access configurations (see
fclX25CfaConfigId).
The possible values are :
00 Public network with facilities,
01 Subscribers without facilities,
02 Subscribers with facilities,
03 PSTN,
19 PSTN VX.32 (TRANSPAC),
If it is unused, the value of this parameter is
'255'.
The default value is '2' (meaning that default
values of X25 parameters are those pre-defined in
profile number 02).rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.1.1.4 |
fclX25CfaModificationCountThe value of this object indicates how many X25
parameters have not the value defined in the
profile specified by fclX25CfaProfileId (i.e how
many individual modifications).ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.1.1.5 |
fclX25CfaDataLinkNetworkTableThis table contains the data link and network
levels parameters of X25 access configurations. SEQUENCE OF FclX25CfaDataLinkNetworkEntry .1.3.6.1.4.1.866.20.1.20.50.1.10 |
fclX25CfaDataLinkNetworkEntryAn entry of fclX25CfaDataLinkNetworkTable. FclX25CfaDataLinkNetworkEntry .1.3.6.1.4.1.866.20.1.20.50.1.10.1 |
fclX25CfaDlnConfigIdThe value of this object identifies one and only
one X25 access configuration. The possible values
are : '0..199. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.10.1.1 |
fclX25CfaDlnStationTypeThe value of this object defines the type of the
interface at the data link layer (and not at the
physical layer which is defined in fcfLineType).
The equipment can acts as a DTE (Data Terminal
Equipment) or as a DCE (Data Circuit-terminating
Equipment). The default value is 'dce'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.10.1.2 |
fclX25CfaDlnNetworkTypeThe value of this parameter defines the type of
the network which the equipment is working with.
The authorized values are :
x25,
'transpac' in France,
'telenet' in the USA,
'tymnet' in the USA,
'infoSwitch' in Canada,
'datapac' in Canada,
'dn1' in the Netherlands,
'pss' in Great Britain,
'germanyDatexP' in Germany,
'dcs' in Belgium,
'itapac' in Italy,
'austpac' in Australia,
'uninet' in the USA,
'telepac' in Switzerland,
'iberpac' in Spain,
'datapak' in Sweden,
'helpac' in Greece,
'entel' in Argentina,
'austriaDatexP' in Austria.
The default value is 'transpac'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.10.1.3 |
fclX25CfaDlnN2RetryCountThe value of this object indicates the maximum
number (N2) of attempts made by the equipment to
complete the successfull transmission of a frame.
The authorized values are '2..250'. The default
value is '10'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.10.1.5 |
fclX25CfaDlnT1AcknowledgeTimerThe value of this object indicates the period
(T1), in milliseconds, at the end of which
retransmission of a frame may be initiated. The
authorized values are '200..25000'. The default
value is '1600'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.10.1.6 |
fclX25CfaDlnT2AcknwledgeDelayTimerThe value of this object indicates the amount of
time available (T2), in milliseconds, before the
acknowledging frame must be initiated. This
parameter must be smaller than T1. The authorized
values are '100..12700'. The default value is
'100'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.10.1.7 |
fclX25CfaDlnKWindowSizeThe value of this object indicates the maximum
number (K) of sequentially numbered I frames that
the equipment may have outstanding (i.e..
unacknowledged) at any given time. The authorized
values are '1..127'. The default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.10.1.8 |
fclX25CfaDlnEachPacketAcknowledgementThe value of this object indicates whether each
frame is acknowledged or not. The default value is
'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.10.1.9 |
fclX25CfaDlnLowestIncomingChannelThe value of this object is the Lowest Incoming
one-way logical Channel (LIC).The authorized
values are '0..4095'. The default value is '26'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.10.1.10 |
fclX25CfaDlnIncomingChannelCountThe value of this object is the Number of Incoming
one-way logical Channels (NIC). So the Highest
Incoming one-way logical Channel (HIC) is : HIC =
LIC + NIC - 1. The authorized values are
'0..4096'. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.10.1.11 |
fclX25CfaDlnLowestTwoWayChannelThe value of this object is the Lowest Two-way
logical Channel (LTC). The authorized values are
'0..4095'. The default value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.10.1.15 |
fclX25CfaDlnTwoWayChannelCountThe value of this object is the Number of Two-way
logical Channels. So the Highest Two-way logical
Channel (HTC) is : HTC = LTC + NTC - 1. The
authorized values are '0..4096'. The default value
is '25'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.10.1.16 |
fclX25CfaDlnLowestOutgoingChannelThe value of this object is the Lowest Outgoing
one-way logical Channel (LOC). The authorized
values are '0..4095'. The default value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.10.1.17 |
fclX25CfaDlnOutgoingChannelCountThe value of this object is the Number of Outgoing
one-way logical Channels (NOC). So the Highest
Outgoing one-way logical Channel (HOC) is : HOC =
LOC + NOC - 1. The authorized values are
'0..4096'. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.10.1.18 |
fclX25CfaDlnOutgoingChannelNumberingThe value of this object indicates whether the
equipment searches for a logical channel from the
lowest one to the highest one (incremental order)
or from the highest one to the lowest one
(decremental order). The default value is
'incremental'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.10.1.19 |
fclX25CfaDlnDBitModificationThe value of this object indicates how the
equipment manages the D bit (Delivery Confirmation
Bit). When it receives a call from a DTE wishing
to receive an end-to-end acknowledgement of
delivery the equipment may :
ignore this D bit procedure ('off' value), ???
indicate clearing ('clear' value),
??? ('on' value),
The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.10.1.30 |
fclX25CfaFacilityTableThis table contains the facility level parameters
of X25 access configurations (except fast select,
throughput class, packet size and window size
which take place in
fclX25CfaNegotiatedFacilityTable). SEQUENCE OF FclX25CfaFacilityEntry .1.3.6.1.4.1.866.20.1.20.50.1.20 |
fclX25CfaFacilityEntryAn entry of fclX25CfaFacilityTable. FclX25CfaFacilityEntry .1.3.6.1.4.1.866.20.1.20.50.1.20.1 |
fclX25CfaFacConfigIdThe value of this object identifies one and only
one X25 access configuration. The possible values
are : '0..199. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.20.1.1 |
fclX25CfaFacClosedUserGroupThe value of this object specifies the behaviour
of the equipment with respect to the Closed User
Group (CUG) facility. There are 4 possible values
:
noCheck : the CUG is not checked,
clear : clearing if the CUG is present in a
call packet from a subscriber,
subscribe : clearing if the CUG is not present
in a call packet from a subcriber,
subscribeAndRemove :
clearing if the CUG is not present in a call
packet from a subcriber,
suppression of the CUG in a call packet to a
subcriber.
The default value is 'noCheck'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.20.1.2 |
fclX25CfaFacReverseChargingThe value of this object specifies the behaviour
of the equipment with respect to the reverse
charging facility. If the called subscriber
doesn't accept the reverse charging, the call is
not transmitted and a clear is sent. The default
value is 'refuse'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.20.1.5 |
fclX25CfaFacTransitDelayThe value of this object specifies the behaviour
of the equipment with respect to the transit delay
facility. The authorized values are :
noCheck : no checking
clear : clearing
subscribe : according to the following table :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| packet |from network|from subscriber|
|~~~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~~~~|
| call |no checking | no checking |
|~~~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~~~~|
|call connected|no checking | clearing (2) |
|~~~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~~~~|
| clear |clearing (1)| clearing (2) |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(1) : diagnostic = 05 41
(2) : diagnostic to local equipment = 03 41,
diagnostic to remote equipment = 03 41
The default value is 'noCheck'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.20.1.6 |
fclX25CfaFacOutputMarkersThe value of this object specifies the behaviour
of the equipment with respect to the outgoing
facility markers. The authorized values are :
noCheck : no checking,
remove : the markers are not transmitted,
check : according to the following table :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| packet | facility marker |
| |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | 0000 (1) | 00FF (2) | 000F (3) |
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call |no checking |clearing (5)|no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call | | | |
|connected|clearing (4)|no checking |no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| clear | - | - |no checking|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(1) : registration codes,
non-x25 facilities provided by the
network in case of intranetwork calls,
non-x25 facilities provided by the
network to which the calling DTE is
connected in case of internetwork
calls
(2) : non-x25 facilities provided by the
network to which the calling DTE is
connected in case of intranetwork
calls
(3) : CCITT-specified DTE facilities
(4) : diagnostic to local equipment = 03 42,
diagnostic to remote equipment = 11 42
(5) : diagnostic to local equipment = 03 42
The default value is 'noCheck'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.20.1.7 |
fclX25CfaFacInputMarkersMarqueurs en receptionrw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.20.1.8 |
fclX25CfaFacOutputUnknownFacilityThe value of this object specifies the behaviour
of the equipment with respect to an outgoing
unknown facility. The authorized values are :
noCheck : no checking,
remove : the unknown facility is not sent,
clear : clearing.
The default value is 'noCheck'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.20.1.10 |
fclX25CfaFacInputUnknownFacilityThe value of this object specifies the behaviour
of the equipment with respect to an incoming
unknown facility. The authorized values are :
noCheck : no checking,
remove : the unknown facility is not sent,
clear : clearing.
The default value is 'noCheck'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.20.1.11 |
fclX25CfaNegotiatedFacilityTableThis table contains the facility level parameters
of X25 access configurations (except closed user
group, reverse charging, transit delay, markers,
unknown facility which take place in
fclX25CfaFacilityTable). SEQUENCE OF FclX25CfaNegotiatedFacilityEntry .1.3.6.1.4.1.866.20.1.20.50.1.21 |
fclX25CfaNegotiatedFacilityEntryAn entry of fclX25CfaNegotiatedFacilityTable. FclX25CfaNegotiatedFacilityEntry .1.3.6.1.4.1.866.20.1.20.50.1.21.1 |
fclX25CfaNegConfigIdThe value of this object identifies one and only
one X25 access configuration. The possible values
are : '0..199. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.21.1.1 |
fclX25CfaNegOutputFastSelectThe value of this object specifies the behaviour
of the equipment with respect to the fast select
facility in outgoing call. The authorized values
are 'noCheck' (no checking), 'clear' (clearing),
'subscribe'. The default value is 'noCheck'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.2 |
fclX25CfaNegInputFastSelectThe value of this object is the maximum size of
the call user data field in a received call
request packet not containing the fast select
facility. The authorized values are 'subscribe'
(up to 16 bytes) or 'longUserData' (up to 128
bytes). The default value is 'subscribe'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.3 |
fclX25CfaNegThroughputClassThe value of this object indicates whether the
subscriber connected to the link has subscribed to
throughput class negociation facility or not. The
authorized values are 'clear' (not subscriber) or
'subscribe'. The default value is 'subscribe'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.10 |
fclX25CfaNegDefOutThroughputClassThe value of this object indicates the default
throughput class in transmit direction (equipment
to remote peer). The default value is 4800 bits
per second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.11 |
fclX25CfaNegDefInThroughputClassThe value of this object indicates the default
throughput class in receive direction (remote peer
to equipment). The default value is 4800 bits per
second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.12 |
fclX25CfaNegMaxOutThroughputClassThe value of this object indicates the maximum
throughput class in transmit direction (equipment
to remote peer). The default value is 4800 bits
per second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.13 |
fclX25CfaNegMaxInThroughputClassThe value of this object indicates the maximum
throughput class in receive direction (equipment
to remote peer). The default value is 4800 bits
per second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.14 |
fclX25CfaNegPacketSizeThe value of this object indicates whether the
subscriber connected to the link has subscribed to
packet size negociation facility or not. The
authorized values are 'clear' (not subscriber) or
'subscribe'. The default value is 'subscribe'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.20 |
fclX25CfaNegDefOutPacketSizeThe value of this object indicates the default
packet size in transmit direction (equipment to
remote peer). The default value is 128 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.21 |
fclX25CfaNegDefInPacketSizeThe value of this object indicates the default
packet size in receive direction (remote peer to
equipment). The default value is 128 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.22 |
fclX25CfaNegMaxOutPacketSizeThe value of this object indicates the maximum
packet size in transmit direction (equipment to
remote peer). The default value is 256 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.23 |
fclX25CfaNegMaxInPacketSizeThe value of this object indicates the maximum
packet size in receive direction (remote peer to
equipment). The default value is 256 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.24 |
fclX25CfaNegMinOutPacketSizeThe value of this object indicates the minimum
packet size in transmit direction (equipment to
remote peer). The default value is 32 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.25 |
fclX25CfaNegMinInPacketSizeThe value of this object indicates the minimum
packet size in receive direction (remote peer to
equipment). The default value is 32 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.26 |
fclX25CfaNegWindowSizeThe value of this object indicates whether the
subscriber connected to the link has subscribed to
the negociation of the transmit window size
facility or not. The authorized values are 'clear'
(not subscriber) or 'subscribe'. The default value
is 'subscribe'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.21.1.30 |
fclX25CfaNegDefOutWindowSizeThe value of this object indicates the default
window size in transmit direction (equipment to
remote peer). The authorized values are '1..7'.
The default value is '2'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.21.1.31 |
fclX25CfaNegDefInWindowSizeThe value of this object indicates the default
window size in receive direction (remote peer to
equipment). The authorized values are '1..7'. The
default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.21.1.32 |
fclX25CfaNegMaxOutWindowSizeThe value of this object indicates the maximum
window size in transmit direction (equipment to
remote peer). The authorized values are '1..7'.
The default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.21.1.33 |
fclX25CfaNegMaxInWindowSizeThe value of this object indicates the maximum
window size in receive direction (remote peer to
equipment). The authorized values are '1..7'. The
default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.21.1.34 |
fclX25CfaSignallingTableThis table contains the signalling level
parameters of X25 access configurations. SEQUENCE OF FclX25CfaSignallingEntry .1.3.6.1.4.1.866.20.1.20.50.1.30 |
fclX25CfaSignallingEntryAn entry of fclX25CfaSignallingTable. FclX25CfaSignallingEntry .1.3.6.1.4.1.866.20.1.20.50.1.30.1 |
fclX25CfaSigConfigIdThe value of this object identifies one and only
one X25 access configuration. The possible values
are : '0..199. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.30.1.1 |
fclX25CfaSigTypeThe value of this object defines the signalling
processing behaviour over the connected line. The
authorized values are 'x25Network',
'x25Subscriber', 'x75'. The default value is
'x25Subscriber'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.30.1.2 |
fclX25CfaSigPacketAddressCountThe value of this object is the number of
addresses in call request packets sent or
received. The authorized values are '1..2'. The
'1' value indicates that one of two addressing
fields (calling address for packets from
subscriber, called address for packets to
subscriber) contains only the suffix (after DNIC
ZO AB). The '2' value indicates that both
addressing fields of each of the two types of call
request packet (calling, called) contain the
complete addresses. If fclX25CfaSigType is set to
'x25Network', the value of this object must be
'2'. The default value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.30.1.3 |
fclX25CfaSigSubAddressTransmissionThe value of this object indicates whether the
sub-address of the called address field of the
call request packet received on a PDNL (Public
Data Network Link) is retransmitted on the
outgoing line or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.30.1.4 |
fclX25CfaSigPdnIndicatorThe value of this object specifies the behaviour
of the equipment with respect to a PDNL (Public
Data Network Link). The authorized values are :
off : it is not a PDNL,
pdnWithoutAddressTransmission : for a PDNL with
address transport,
pdnWithAddressTransmission : for a PDNL with
address packing,
dedicatedLaPoste : for Muse network,
dedicatedTranspac : for Transpac network.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.30.1.5 |
fclX25CfaSigConversionAimedPointThe value of this object indicates whether the
'aimed point' address conversion is enabled or
not. This conversion consists in making the
routing process work not with the called address
from the call packet but with a substituted
address according to the address conversion table
(see fcwAddrConvIncomingCallTable). Therefore this
reduces the number of entries of the routing
tables if several called addresses are converted
to same 'aimed point' address. The default value
is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.30.1.10 |
fclX25CfaSigConversionIncomingCallThe value of this object indicates which address
field are converted on an incoming call. The
authorized values are :
off : no address field conversion,
callingAddress : conversion of the calling
address field according to the contains of
fcwAddrConvIncomingCallTable,
calledAddress : conversion of the called
address field according to the contains of
fcwAddrConvIncomingCallTable,
callingAddressAndCalledAddress : conversion of
the calling and called address fields
according to the contains of
fcwAddrConvIncomingCallTable.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.30.1.11 |
fclX25CfaSigConversionOutgoingCallThe value of this object indicates which address
field are converted on an outgoing call. The
authorized values are :
off : no address field conversion,
callingAddress : conversion of the calling
address field according to the contains of
fcwAddrConvOutgoingCallTable,
calledAddress : conversion of the called
address field according to the contains of
fcwAddrConvOutgoingCallTable,
callingAddressAndCalledAddress : conversion of
the calling and called address fields
according to the contains of
fcwAddrConvOutgoingCallTable.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.30.1.12 |
fclX25CfaSigConversionAddressCheckThe value of this object indicates the behaviour
of the equipment when a requested address
conversion can not be made because the address is
not found in the address conversion tables
(fcwAddrConvIncomingCallTable or
fcwAddrConvOutgoingCallTable). In this case the
call will be cleared when 'checking' is enabled.
The authorized values are :
off : no checking,
onIncomingCall : checking on incoming calls,
onOutgoingCall : checking on outgoing calls,
onIcomingCallAndOutgoingCall : checking on
incoming and outgoing calls.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.30.1.13 |
fclX25CfaSigConvMultiCalledAddrInCallNumero d'identification pour conversion d'adresse
d'appele multi-criteres en entreerw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.30.1.14 |
fclX25CfaSigConvMultiCallingAddrInCallNumero d'identification pour conversion d'adresse
d'appelant multi-criteres en entreerw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.30.1.15 |
fclX25CfaSigConvMultiCalledAddrOutCallNumero d'identification pour conversion d'adresse
d'appele multi-criteres en sortierw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.30.1.16 |
fclX25CfaSigConvMultiCallingAddrOutCallNumero d'identification pour conversion d'adresse
d'appelant multi-criteres en sortierw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.30.1.17 |
fclX25CfaSigOutPacketCauseFieldThe value of this object describes which operation
the equipment makes on the cause field of reset,
clear, and restart request and indication outgoing
packets. The authorized values are :
noModify : no operation,
setToZero : the cause field is set to 0
(meaning 'DTE originated').
The default value is 'noModify'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.30.1.20 |
fclX25CfaSigInPacketCauseFieldThe value of this object describes which operation
the equipment makes on the cause field of reset,
clear, and restart request and indication incoming
packets. The authorized values are :
noModify : no operation,
setToZero : the cause field is set to 'DTE
originated'.
setToZeroIfLowerThan128 : the cause field is
set to 'DTE originated' only if the bit 8
is 0 (i.e. if the bits 7 to 1 are those
included by the remote DTE).
modify : if the cause field is 'Invalid
facility request' or 'Local procedure
error' then it is changed to 'Network
congestion' else no operation.
The default value is 'noModify'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.30.1.21 |
fclX25CfaSigT11CallResponseTimerThe value of this object is the maximum time (in
seconds) the equipment will wait for a response to
a call request packet sent on the link. A clear
packet is sent if there is no response after this
time. The authorized values are '10..2500' by step
of 10. The default value is '200'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.30.1.22 |
fclX25CfaSigCallAcceptedFormatThe value of this object defines the format of an
outgoing call connected packet. The authorized
values are :
noFacilitiesNoAddresses : no facility length
and facility fields, calling and called
DTE address lengths set to 0,
facilitiesNoAddresses : facility length and
facility fields, calling and called DTE
address lengths set to 0,
facilitiesNoCheckedAdresses : facility length
and facility fields, calling and called
DTE address lengths different from 0,
addresses are not checked (???),
facilitiesCheckedAddresses : facility length
and facility fields, calling and called
DTE address lengths different from 0,
addresses are checked (???),
The default value is 'noFacilitiesNoAddresses'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.30.1.25 |
fclX25CfaSigClearFormatThe value of this object defines the format of an
outgoing call connected packet. The authorized
values are :
noFacilitiesNoAddresses : no facility length
and facility fields, calling and called
DTE address lengths set to 0,
facilitiesNoAddresses : facility length and
facility fields, calling and called DTE
address lengths set to 0,
facilitiesNoCheckedAdresses : facility length
and facility fields, calling and called
DTE address lengths different from 0,
addresses are not checked (???),
facilitiesCheckedAddresses : facility length
and facility fields, calling and called
DTE address lengths different from 0,
addresses are checked (???),
The default value is 'noFacilitiesNoAddresses'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.30.1.26 |
fclX25CfaServiceTableThis table contains the services level parameters
of X25 access configurations. SEQUENCE OF FclX25CfaServiceEntry .1.3.6.1.4.1.866.20.1.20.50.1.40 |
fclX25CfaServiceEntryAn entry of fclX25CfaServiceTable. FclX25CfaServiceEntry .1.3.6.1.4.1.866.20.1.20.50.1.40.1 |
fclX25CfaSerConfigIdThe value of this object identifies one and only
one X25 access configuration. The possible values
are : '0..199. If it is unused, the value of this
parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.40.1.1 |
fclX25CfaSerReliableVcThe value of this object is used to enable the
Reliable Virtual Circuit service. The authorized
values are :
off : no RVC, the VCs are considered as normal
VCs, no particular processing,
clear : RVCs are not allowed for the
subscriber, each attempt to establish a
RVC provokes a clear of the connection,
subscribe : all calls transmitted by the
subscriber establish RVCs, it is also
possible to receive calls with RVC option,
check :
for a link to a subscriber : when a call with
RVC option is received, a RVC is
established
for a link to a network : the RVC option is
ignored when it is present in a call sent
by a local subscriber, the connection is
cleared when the RVC option is present in
a call sent by the network.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.40.1.2 |
fclX25CfaSerChargingThe value of this object is used to enable the
charging service. The authorized values are :
off : no charging,
overall : charging (a charging ticket is made
of informations from all the lines of the
equipment),
detailed : charging (a charging ticket is made
of informations from one virtual circuit),
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.40.1.3 |
fclX25CfaSerX29ReselectionThe value of this object indicates whether the
subscriber connected to the link has subscribed to
X29 reselection or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.40.1.4 |
fclX25CfaSerRemoteExclusiveLinkThe value of this object indicates whether this
link is the only way to join the facing equipment
(exclusive link = yes, the equipment answers to a
call packet with a clear packet) or there is
another way to join it (exclusive link = no, the
equipment answers to a call packet with a 'call
return' packet, to make the previous equipments
search for another route). The default value is
'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.40.1.5 |
fclX25CfaSerStatLoadAndTrafficThe value of this object indicates whether, for
this link, the load and traffic informations
recording of the statistics management function is
enabled or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.40.1.10 |
fclX25CfaSerStatSignallingThe value of this object indicates whether, for
this link, the signalling informations recording
of the statistics management function is enabled
or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.40.1.11 |
fclX25CfaSerStatTotalizerThe value of this object indicates whether, for
this link, the frames counting informations
recording of the statistics management function is
enabled or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.40.1.12 |
fclX25CfaSerStatCompressionThe value of this object indicates whether, for
this link, the compression informations recording
of the statistics management function is enabled
or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.40.1.13 |
fclX25CfaSerCompressionThe value of this object indicates the compression
enabling for each direction. The authorized values
are :
off : no compression,
networkToSubscriber : compression of the flow
from the remote peer to the equipment,
subscriberToNetwork : compression of the flow
from the equipment to the remote peer,
bothway : compression of the two flows from and
to the equipment.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.40.1.20 |
fclX25CfaSerCompressNegotiationThe value of this object indicates whether the
compression facility is negociated or not and, if
negociated, the optional/obligatory status. The
authorized values are :
off' :no negociation,
onOptionalCompression : negociation but
compression is optional,
onMandatoryCompression : negociation and
compression is mandatory.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.40.1.21 |
fclX25CfaSerCompressScramblingThe value of this object indicates, when the
compression is active, whether the scrambling is
enabled or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.40.1.22 |
fclX25CfaSerCompressMultiPacketsTimerThe value of this object defines the maximum
waiting time, in milliseconds by steps of 100
milliseconds , which, if there is not another
packet to compress, the packet of compressed
packets is sent beyond (this permits to reduce the
number of packets transmitted to the remote peer).
The authorized values are '0..1500'. '0' means no
packets grouping (i. e. : each packet is
individually compressed and sent). The default
value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.40.1.23 |
fclX25CfaSerCosCOSrw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.40.1.30 |
fclX25CfaSerCirEntrant CIRrw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.40.1.31 |
fclX25CfaSerMinCirEntrant CIR minirw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.40.1.32 |
fclX25CfaSerBeEntrant BErw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.40.1.33 |
fclX25CfaPackingAddresses OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.50.1.50 |
fclX25CfaPackOutSubAddressCheckThe value of this object indicates whether the
packing mechanism (see fclX25CfaPackingTable) is
enabled for the outgoing call packets or not. The
default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.50.1 |
fclX25CfaPackOutSubAddressSizeThe value of this object defines the length of the
substituted sub-address used by the packing
mechanism (see fclX25CfaPackSubAddress). The
authorized values are '1..4'. The default value is
'2'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.50.2 |
fclX25CfaPackPdnCallingSubAddressThe value of this object indicates, when using the
packing mechanism, whether the calling address is
packed or is removed (i.e. there is no calling
sub-address). The default value is 'remove'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.50.3 |
fclX25CfaPackingTableThis table defines the association between the ZO
SB part of the DNIC ZO SB address and the
substituted sub-address (i.e. the 'packed ZO SB').
This substitution is enabled on a link when
fclX25CfaSigPdnIndicator is set to
'pdnWithAddressTransmission'. SEQUENCE OF FclX25CfaPackingEntry .1.3.6.1.4.1.866.20.1.20.50.1.50.4 |
fclX25CfaPackingEntryAn entry of fclX25CfaPackingTable. FclX25CfaPackingEntry .1.3.6.1.4.1.866.20.1.20.50.1.50.4.1 |
fclX25CfaPackPrivateZoSbThe value of this object is the ZO SB part of the
DNIC ZO SB address which is replaced by the
sub-address defined in fclX25CfaPackSubAddress.
The value may contain up to 4 digits (digits
0..9). The value must be completed with 'F' digits
for a total of 4 digits. The equipment
configurator does not need final completion. The
default value is 'FF FF' meaning 'empty value'
(blank value on the equipment configurator).ro OCTET STRING .1.3.6.1.4.1.866.20.1.20.50.1.50.4.1.1 |
fclX25CfaPackStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.50.4.1.2 |
fclX25CfaPackSubAddressThe value of this object is the substituted
sub-address (i.e. the 'packed ZO SB') which
replaces the ZO SB part of the DNIC ZO SB address
defined in fclX25CfaPackPrivateZoSb. The value may
contain up to 'fclX25CfaPackOutSubAddressSize'
digits (digits 0..9). The value must be completed
with 'F' digits for a total of 4 digits. The
equipment configurator does not need final
completion. The default value is 'FF FF' meaning
'empty value' (blank value on the equipment
configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.20.50.1.50.4.1.3 |
fclX25CfaClosedUserGroupTableThis table defines the Closed User Groups to which
belong the subscribers. This table is used on a
link when fclX25CfaFacClosedUserGroup is set to
'subscribe' or 'subscribeAndRemove'. SEQUENCE OF FclX25CfaClosedUserGroupEntry .1.3.6.1.4.1.866.20.1.20.50.1.51 |
fclX25CfaClosedUserGroupEntryAn entry of fclX25CfaClosedUserGroupTable. FclX25CfaClosedUserGroupEntry .1.3.6.1.4.1.866.20.1.20.50.1.51.1 |
fclX25CfaCugLogPortIdThe value of this object identifies one and only
one access logical port. There may up to 28 CUG
for only one logical port. The possible values are
: '0..131'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.51.1.1 |
fclX25CfaCugClosedUserGroupIdThis value defines one CUG associated to the
logical port defined in fclX25CfaCugLogPortId. The
possible values are : '0..99. If it is unused, the
value of this parameter is '255'. The default
value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.51.1.2 |
fclX25CfaCugStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.51.1.3 |
fclX25CfaCugCheckingThe value of this object defines on which call the
equipment checks this CUG. The default values is
'onIncomingCallAndOutgoingCall'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.1.51.1.4 |
fclX25CfaCugClosedUserGroupExtGFU externerw INTEGER .1.3.6.1.4.1.866.20.1.20.50.1.51.1.5 |
fclX25ConfigInterNode OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.50.10 |
fclX25ConfigInterNodeTableThis table contains the X25 inter-node
configurations used by X25 inter-node links. SEQUENCE OF FclX25ConfigInterNodeEntry .1.3.6.1.4.1.866.20.1.20.50.10.1 |
fclX25ConfigInterNodeEntryAn entry of fclX25ConfigInterNodeTable. FclX25ConfigInterNodeEntry .1.3.6.1.4.1.866.20.1.20.50.10.1.1 |
fclX25CfnConfigIdThe value of this object identifies one and only
one X25 inter-node configuration. This
configuration may be referenced by
fclX25InBRemX25ConfigId,
fclX25PstnX25InterNodeConfigId,
fclX25SlpX25InterNodeConfigId,
fclX25SlpIsdnRemX25InterNodeConfigId,
fclX25SlpPstnBackX25InterNodeConfigId,
fclX25MlpX25InterNodeConfigId or
fclFrPvcX25InterNodeConfigId.
The possible values are : '0..199. If it is
unused, the value of this parameter is '255'.
The X25 inter-node configuration parameters are
described in :
fclX25CfnaDataLinkNetworkTable : data link and
network levels,
fclX25CfnNegotiatedFacilityTable : facility
level,
fclX25CfnSignallingTable : signalling level,
fclX25CfnServiceTable : services level.
When creating a new configuration each parameter
takes its default value. Setting a profile allows
the user to fill all the parameters with values
pre-defined in this profile but each one may also
be individually modified.ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.1.1.1 |
fclX25CfnStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.1.1.2 |
fclX25CfnDescriptionThe value of this object stores a text description
of the X25 inter-node configuration elaborated by
the user. This description may contains from 0 to
32 characters. The default value is 'DTE
inter-node'.rw DisplayString .1.3.6.1.4.1.866.20.1.20.50.10.1.1.3 |
fclX25CfnProfileIdThe value of this object is the profile number
used to automatically valorize all the X25
parameters in an entry of the four tables which
composes X25 inter-node configurations (see
fclX25CfnConfigId).
The possible values are :
04 DTE inter-node,
05 DCE inter-node,
20 DTE PSTN back-up auto modem,
21 DCE PSTN back-up auto modem,
24 Inter-node (TRANSPAC),
24 Inter-node (TRANSPAC),
40 DTE PSTN back-up V.25bis modem,
1 DCE PSTN back-up V.25bis modem,
74 DTE inter-node X.75 physical,
75 DCE inter-node X.75 physical,
86 DTE FR network (p transac),
87 DCE FR network (p transac),
88 DTE FR Network (no priority),
89 DCE FR Network (no priority),
If it is unused, the value of this parameter is
'255'.
The default value is '4' (meaning that default
values of X25 parameters are those pre-defined in
profile number 04).rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.1.1.4 |
fclX25CfnModificationCountThe value of this object indicates how many X25
parameters have not the value defined in the
profile specified by fclX25CfnProfileId (i.e how
many individual modifications).ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.1.1.5 |
fclX25CfnDataLinkNetworkTableThis table contains the data link and network
levels parameters of X25 inter-node configurations. SEQUENCE OF FclX25CfnDataLinkNetworkEntry .1.3.6.1.4.1.866.20.1.20.50.10.10 |
fclX25CfnDataLinkNetworkEntryAn entry of fclX25CfnDataLinkNetworkTable. FclX25CfnDataLinkNetworkEntry .1.3.6.1.4.1.866.20.1.20.50.10.10.1 |
fclX25CfnDlnConfigIdThe value of this object identifies one and only
one X25 inter-node configuration. The possible
values are : '0..199. If it is unused, the value
of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.10.1.1 |
fclX25CfnDlnStationTypeThe value of this object defines the type of the
interface at the data link layer (and not at the
physical layer which is defined in fcfLineType).
The equipment can acts as a DTE (Data Terminal
Equipment) or as a DCE (Data Circuit-terminating
Equipment). The default value is 'dce'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.10.1.2 |
fclX25CfnDlnN2RetryCountThe value of this object indicates the maximum
number (N2) of attempts made by the equipment to
complete the successfull transmission of a frame.
The authorized values are '2..250'. The default
value is '10'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.10.1.5 |
fclX25CfnDlnT1AcknowledgeTimerThe value of this object indicates the period
(T1), in milliseconds, at the end of which
retransmission of a frame may be initiated. The
authorized values are '200..25000'. The default
value is '800'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.10.1.6 |
fclX25CfnDlnT2AcknowledgeDelayTimerThe value of this object indicates the amount of
time available (T2), in milliseconds, before the
acknowledging frame must be initiated. This
parameter must be smaller than T1. The authorized
values are '100..12700'. The default value is
'400'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.10.1.7 |
fclX25CfnDlnKWindowSizeThe value of this object indicates the maximum
number (K) of sequentially numbered I frames that
the equipment may have outstanding (i.e..
unacknowledged) at any given time. The authorized
values are '1..127'. The default value is '7'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.10.1.8 |
fclX25CfnDlnEachPacketAcknowledgementThe value of this object indicates whether each
frame is acknowledged or not. The default value is
'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.10.1.9 |
fclX25CfnDlnLowestIncomingChannelThe value of this object is the Lowest Incoming
one-way logical Channel (LIC).The authorized
values are '0..4095'. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.10.1.10 |
fclX25CfnDlnIncomingChannelCountThe value of this object is the Number of Incoming
one-way logical Channels (NIC). So the Highest
Incoming one-way logical Channel (HIC) is : HIC =
LIC + NIC - 1. The authorized values are
'0..4096'. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.10.1.11 |
fclX25CfnDlnLowestTwoWayChannelThe value of this object is the Lowest Two-way
logical Channel (LTC). The authorized values are
'0..4095'. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.10.1.15 |
fclX25CfnDlnTwoWayChannelCountThe value of this object is the Number of Two-way
logical Channels. So the Highest Two-way logical
Channel (HTC) is : HTC = LTC + NTC - 1. The
authorized values are '0..4096'. The default value
is '20'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.10.1.16 |
fclX25CfnDlnLowestOutgoingChannelThe value of this object is the Lowest Outgoing
one-way logical Channel (LOC). The authorized
values are '0..4095'. The default value is '20'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.10.1.17 |
fclX25CfnDlnOutgoingChannelCountThe value of this object is the Number of Outgoing
one-way logical Channels (NOC). So the Highest
Outgoing one-way logical Channel (HOC) is : HOC =
LOC + NOC - 1. The authorized values are
'0..4096'. The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.10.1.18 |
fclX25CfnDlnOutgoingChannelNumberingThe value of this object indicates whether the
equipment searches for a logical channel from the
lowest one to the highest one (incremental order)
or from the highest one to the lowest one
(decremental order). The default value is
'decremental'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.10.1.19 |
fclX25CfnDlnDBitModificationThe value of this object indicates how the
equipment manages the D bit (Delivery Confirmation
Bit). When it receives a call from a DTE wishing
to receive an end-to-end acknowledgement of
delivery the equipment may :
ignore this D bit procedure ('off' value), ???
indicate clearing ('clear' value),
??? ('on' value),
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.10.1.30 |
fclX25CfnNegotiatedFacilityTableThis table contains the facility level parameters
of X25 inter-node configurations. SEQUENCE OF FclX25CfnNegotiatedFacilityEntry .1.3.6.1.4.1.866.20.1.20.50.10.11 |
fclX25CfnNegotiatedFacilityEntryAn entry of fclX25CfnNegotiatedFacilityTable. FclX25CfnNegotiatedFacilityEntry .1.3.6.1.4.1.866.20.1.20.50.10.11.1 |
fclX25CfnNegConfigIdThe value of this object identifies one and only
one X25 inter-node configuration. The possible
values are : '0..199. If it is unused, the value
of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.11.1.1 |
fclX25CfnNegOutputFastSelectThe value of this object specifies the behaviour
of the equipment with respect to the fast select
facility in outgoing call. The authorized values
are 'noCheck' (no checking), 'clear' (clearing),
'subscribe'. The default value is 'noCheck'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.2 |
fclX25CfnNegInputFastSelectThe value of this object is the maximum size of
the call user data field in a received call
request packet not containing the fast select
facility. The authorized values are 'subscribe'
(up to 16 bytes) or 'longUserData' (up to 128
bytes). The default value is 'subscribe'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.3 |
fclX25CfnNegThroughputClassThe value of this object indicates whether the
subscriber connected to the link has subscribed to
throughput class negociation facility or not. The
authorized values are 'clear' (not subscriber) or
'subscribe'. The default value is 'subscribe'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.10 |
fclX25CfnNegDefOutThroughputClassThe value of this object indicates the default
throughput class in transmit direction (equipment
to remote peer). The default value is 9600 bits
per second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.11 |
fclX25CfnNegDefInThroughputClassThe value of this object indicates the default
throughput class in receive direction (remote peer
to equipment). The default value is 9600 bits per
second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.12 |
fclX25CfnNegMaxOutThroughputClassThe value of this object indicates the maximum
throughput class in transmit direction (equipment
to remote peer). The default value is 9600 bits
per second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.13 |
fclX25CfnNegMaxInThroughputClassThe value of this object indicates the maximum
throughput class in receive direction (equipment
to remote peer). The default value is 9600 bits
per second.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.14 |
fclX25CfnNegPacketSizeThe value of this object indicates whether the
subscriber connected to the link has subscribed to
packet size negociation facility or not. The
authorized values are 'clear' (not subscriber) or
'subscribe'. The default value is 'subscribe'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.20 |
fclX25CfnNegDefOutPacketSizeThe value of this object indicates the default
packet size in transmit direction (equipment to
remote peer). The default value is 128 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.21 |
fclX25CfnNegDefInPacketSizeThe value of this object indicates the default
packet size in receive direction (remote peer to
equipment). The default value is 128 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.22 |
fclX25CfnNegMaxOutPacketSizeThe value of this object indicates the maximum
packet size in transmit direction (equipment to
remote peer). The default value is 256 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.23 |
fclX25CfnNegMaxInPacketSizeThe value of this object indicates the maximum
packet size in receive direction (remote peer to
equipment). The default value is 256 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.24 |
fclX25CfnNegMinOutPacketSizeThe value of this object indicates the minimum
packet size in transmit direction (equipment to
remote peer). The default value is 16 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.25 |
fclX25CfnNegMinInPacketSizeThe value of this object indicates the minimum
packet size in receive direction (remote peer to
equipment). The default value is 16 octets.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.26 |
fclX25CfnNegWindowSizeThe value of this object indicates whether the
subscriber connected to the link has subscribed to
the negociation of the transmit window size
facility or not. The authorized values are 'clear'
(not subscriber) or 'subscribe'. The default value
is 'subscribe'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.11.1.30 |
fclX25CfnNegDefOutWindowSizeThe value of this object indicates the default
window size in transmit direction (equipment to
remote peer). The authorized values are '1..7'.
The default value is '3'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.11.1.31 |
fclX25CfnNegDefInWindowSizeThe value of this object indicates the default
window size in receive direction (remote peer to
equipment). The authorized values are '1..7'. The
default value is '3'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.11.1.32 |
fclX25CfnNegMaxOutWindowSizeThe value of this object indicates the maximum
window size in transmit direction (equipment to
remote peer). The authorized values are '1..7'.
The default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.11.1.33 |
fclX25CfnNegMaxInWindowSizeThe value of this object indicates the maximum
window size in receive direction (remote peer to
equipment). The authorized values are '1..7'. The
default value is '4'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.11.1.34 |
fclX25CfnSignallingTableThis table contains the signalling level
parameters of X25 inter-node configurations. SEQUENCE OF FclX25CfnSignallingEntry .1.3.6.1.4.1.866.20.1.20.50.10.30 |
fclX25CfnSignallingEntryAn entry of fclX25CfnSignallingTable. FclX25CfnSignallingEntry .1.3.6.1.4.1.866.20.1.20.50.10.30.1 |
fclX25CfnSigConfigIdThe value of this object identifies one and only
one X25 inter-node configuration. The possible
values are : '0..199. If it is unused, the value
of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.30.1.1 |
fclX25CfnSigSubAddressTransmissionThe value of this object indicates whether the
sub-address of the called address field of the
call request packet received on a PDNL (Public
Data Network Link) is retransmitted on the
outgoing line or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.30.1.4 |
fclX25CfnSigConversionAimedPointThe value of this object indicates whether the
'aimed point' address conversion is enabled or
not. This conversion consists in making the
routing process work not with the called address
from the call packet but with a substituted
address according to the address conversion table
(see fcwAddrConvIncomingCallTable). Therefore this
reduces the number of entries of the routing
tables if several called addresses are converted
to same 'aimed point' address. The default value
is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.30.1.10 |
fclX25CfnSigConversionIncomingCallThe value of this object indicates which address
field are converted on an incoming call. The
authorized values are :
off : no address field conversion,
callingAddress : conversion of the calling
address field according to the contains of
fcwAddrConvIncomingCallTable,
calledAddress : conversion of the called
address field according to the contains of
fcwAddrConvIncomingCallTable,
callingAddressAndCalledAddress : conversion of
the calling and called address fields
according to the contains of
fcwAddrConvIncomingCallTable.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.30.1.11 |
fclX25CfnSigConversionOutgoingCallThe value of this object indicates which address
field are converted on an outgoing call. The
authorized values are :
off : no address field conversion,
callingAddress : conversion of the calling
address field according to the contains of
fcwAddrConvOutgoingCallTable,
calledAddress : conversion of the called
address field according to the contains of
fcwAddrConvOutgoingCallTable,
callingAddressAndCalledAddress : conversion of
the calling and called address fields
according to the contains of
fcwAddrConvOutgoingCallTable.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.30.1.12 |
fclX25CfnSigConversionAddressCheckThe value of this object indicates the behaviour
of the equipment when a requested address
conversion can not be made because the address is
not found in the address conversion tables
(fcwAddrConvIncomingCallTable or
fcwAddrConvOutgoingCallTable). In this case the
call will be cleared when 'checking' is enabled.
The authorized values are :
off : no checking,
onIncomingCall : checking on incoming calls,
onOutgoingCall : checking on outgoing calls,
onIcomingCallAndOutgoingCall : checking on
incoming and outgoing calls.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.30.1.13 |
fclX25CfnSigConvMultiCalledAddrInCallNumero d'identification pour conversion d'adresse
d'appele multi-criteres en entreerw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.30.1.14 |
fclX25CfnSigConvMultiCallingAddrInCallNumero d'identification pour conversion d'adresse
d'appelant multi-criteres en entreerw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.30.1.15 |
fclX25CfnSigConvMultiCalledAddrOutCallNumero d'identification pour conversion d'adresse
d'appele multi-criteres en sortierw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.30.1.16 |
fclX25CfnSigConvMultiCallingAddrOutCallNumero d'identification pour conversion d'adresse
d'appelant multi-criteres en sortierw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.30.1.17 |
fclX25CfnSigT11CallResponseTimerThe value of this object is the maximum time (in
seconds) the equipment will wait for a response to
a call request packet sent on the link. A clear
packet is sent if there is no response after this
time. The authorized values are '10..2500' by step
of 10. The default value is '200'.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.30.1.22 |
fclX25CfnSigCallAcceptedFormatThe value of this object defines the format of an
outgoing call connected packet. The authorized
values are :
noFacilitiesNoAddresses : no facility length
and facility fields, calling and called
DTE address lengths set to 0,
facilitiesNoAddresses : facility length and
facility fields, calling and called DTE
address lengths set to 0,
facilitiesNoCheckedAdresses : facility length
and facility fields, calling and called
DTE address lengths different from 0,
addresses are not checked (???),
facilitiesCheckedAddresses : facility length
and facility fields, calling and called
DTE address lengths different from 0,
addresses are checked (???),
The default value is 'noFacilitiesNoAddresses'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.30.1.25 |
fclX25CfnServiceTableThis table contains the services level parameters
of X25 inter-node configurations. SEQUENCE OF FclX25CfnServiceEntry .1.3.6.1.4.1.866.20.1.20.50.10.40 |
fclX25CfnServiceEntryAn entry of fclX25CfnServiceTable. FclX25CfnServiceEntry .1.3.6.1.4.1.866.20.1.20.50.10.40.1 |
fclX25CfnSerConfigIdThe value of this object identifies one and only
one X25 inter-node configuration. The possible
values are : '0..199. If it is unused, the value
of this parameter is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.20.50.10.40.1.1 |
fclX25CfnSerReliableVcThe value of this object is used to enable the
Reliable Virtual Circuit service. The authorized
values are :
off : no RVC, the VCs are considered as normal
VCs, no particular processing,
clear : RVCs are not allowed for the
subscriber, each attempt to establish a
RVC provokes a clear of the connection,
subscribe : all calls transmitted by the
subscriber establish RVCs, it is also
possible to receive calls with RVC option,
check :
for a link to a subscriber : when a call with
RVC option is received, a RVC is
established
for a link to a network : the RVC option is
ignored when it is present in a call sent
by a local subscriber, the connection is
cleared when the RVC option is present in
a call sent by the network.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.40.1.2 |
fclX25CfnSerChargingThe value of this object is used to enable the
charging service. The authorized values are :
off : no charging,
overall : charging (a charging ticket is made
of informations from all the lines of the
equipment),
detailed : charging (a charging ticket is made
of informations from one virtual circuit),
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.40.1.3 |
fclX25CfnSerX29ReselectionThe value of this object indicates whether the
subscriber connected to the link has subscribed to
X29 reselection or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.40.1.4 |
fclX25CfnSerRemoteExclusiveLinkThe value of this object indicates whether this
link is the only way to join the facing equipment
(exclusive link = yes, the equipment answers to a
call packet with a clear packet) or there is
another way to join it (exclusive link = no, the
equipment answers to a call packet with a 'call
return' packet, to make the previous equipments
search for another route). The default value is
'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.40.1.5 |
fclX25CfnSerCallReturnTransmissionThe value of this object indicates whether the
'call return' packet may be sent on this link or
not. The 'call return' packet, sent to the
previous equipment, makes this equipments search
for another route to join the called DTE. The
defaut value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.40.1.6 |
fclX25CfnSerStatLoadAndTrafficThe value of this object indicates whether, for
this link, the load and traffic informations
recording of the statistics management function is
enabled or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.40.1.10 |
fclX25CfnSerStatSignallingThe value of this object indicates whether, for
this link, the signalling informations recording
of the statistics management function is enabled
or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.40.1.11 |
fclX25CfnSerStatTotalizerThe value of this object indicates whether, for
this link, the frames counting informations
recording of the statistics management function is
enabled or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.40.1.12 |
fclX25CfnSerStatCompressionThe value of this object indicates whether, for
this link, the compression informations recording
of the statistics management function is enabled
or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.10.40.1.13 |
fclX25ConfigMiscellaneous OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.20.50.30 |
fclX25CfmDiagnosticCodeFieldThe value of this object indicates how the
diagnostic field is encoded. The default value is
'privateCoding'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.30.1 |
fclX25CfmTransmitFlowControlThe value of this object indicates whether the
flow control is made according to the standard or
according to fclX25CfmTransmitFlowControlTable
(this way is used by TRANSPAC). The default value
is 'standard'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.30.2 |
fclX25CfmAddress14DigitsTruncationThe value of this object indicates whether the
addresses are truncated to 14 digits or not. The
default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.20.50.30.3 |
fclX25CfmTransmitFlowControlTableThis table defines non standard flow control. This
table is used if fclX25CfmTransmitFlowControl is
set to 'dedicatedTranspac'. SEQUENCE OF FclX25CfmTransmitFlowControlEntry .1.3.6.1.4.1.866.20.1.20.50.30.20 |
fclX25CfmTransmitFlowControlEntryAn entry of fclX25CfmTransmitFlowControlTable. FclX25CfmTransmitFlowControlEntry .1.3.6.1.4.1.866.20.1.20.50.30.20.1 |
fclX25CfmFlowCtrlPacketSizeThe value of this object defines a packet size.ro Enumeration .1.3.6.1.4.1.866.20.1.20.50.30.20.1.1 |
fclX25CfmFlowCtrlMaxWindowSizeThe value of this object defines the maximum
window size used for this packet size.rw INTEGER .1.3.6.1.4.1.866.20.1.20.50.30.20.1.2 |
fcWanSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.25 |
fcwDnicZoAddressThe value of this object is the address of the
equipment. This address , with a DNIC ZO format as
explained below, must have 6 digits (0..9). The
default value is '900000'.
Address format :
Eight digits (0..9) of X121 format are used as
the network address numbering plan. This
numbering plan has a hierarchical structure
:
4 digits define the Data Network Identifier
Code (DNIC) : DNIC identifies the region
to which belongs the equipment,
2 digits define the zone (ZO) : ZO
identifies the equipment inside the
region,
2 digits define the subscriber (SB) : SB
identifies a subscriber of the equipment.
Therefore each subscriber is completely
identified by its address of the form DNIC
ZO SB and each equipment by its address of
the form DNIC ZO.rw OCTET STRING .1.3.6.1.4.1.866.20.1.25.1 |
fcwMaxActiveCommunicationsThe value of this object defines the maximum
number of the simultaneous active communications.
The authorized values are '32..2048'. The default
value is '512'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.10 |
fcwDataPacketsDiscardThresholdThe value of this object defines the busy memory
threshold, in percentage of the total memory
resources, beyond which the equipment discards the
X25 data packets. The authorized values are
'10..99'. The default value is '98'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.20 |
fcwDataPacketsAcceptThresholdThe value of this object defines the busy memory
threshold, in percentage of the total memory
resources, under which the equipment does not
discard any more the X25 data packets. The
authorized values are '10..99'. The default value
is '98'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.21 |
fcwCallPacketsDiscardThresholdThe value of this object defines the busy memory
threshold, in percentage of the total memory
resources, beyond which the equipment discards the
X25 call packets. The authorized values are
'10..99'. The default value is '95'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.22 |
fcwCallPacketsAcceptThresholdThe value of this object defines the busy memory
threshold, in percentage of the total memory
resources, under which the equipment does not
discard any more the X25 call packets. The
authorized values are '10..99'. The default value
is '90'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.23 |
fcwLocalCommunicationsThe value of this object defines whether the local
communications (i.e. between two subscribers to
this equipment) are authorized or not. For
instance, these communications are denied when it
is neccessary to re-route them to a billing
equipment. The route used in this case is defined
by fcwLocalIncomingCallsRouteId.
The default value is 'permitted'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.30 |
fcwLocalIncomingCallsRouteIdThe value of this object defines the route used by
the local incoming call packets when the local
communications are forbidden
(fcwLocalCommunications set to 'denied'). This
route must exist in fcwRouteTable. The authorized
values are '0..199'. The default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.31 |
fcwLoadAndTrafficSummingPeriodThe value of this object is the period, in
seconds, during which load and traffic quantity is
summed and used by the switch over or overflow
mechanisms. The authorized values are '10..2500'
by step of 10. The default value is '20'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.40 |
fcwLoadAndTrafficEventsTimerThe value of this object defines the time, in
seconds, between two load and traffic event
generations. These event are generated by the
switch over or overflow mechanisms when a
threshold is crossed. The authorized values are
'10..2500' by step of 10. The default value is
'20'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.41 |
fcwFrameRelay OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.25.45 |
fcwFrDlcStatusChangeTrapEnablingEmission du TRAP 'changement d'etat d'une
terminaison PVC' defini en RFC1315rw Enumeration .1.3.6.1.4.1.866.20.1.25.45.5 |
fcwFrAnnexeGInternalStacksMaxCountNb max d'instances FRI disponiblerw INTEGER .1.3.6.1.4.1.866.20.1.25.45.6 |
fcwFrEndPointMaxCountNb max de terminaisons FR simultanees (SVC ou PVC)rw INTEGER .1.3.6.1.4.1.866.20.1.25.45.10 |
fcwFrFrameAcceptCpuThresholdSeuil : CPU autorisee pour l'acceptation des tramesrw INTEGER .1.3.6.1.4.1.866.20.1.25.45.20 |
fcwFrFrameAcceptMemoryThresholdSeuil : Memoire autorisee pour l'acceptation des
tramesrw INTEGER .1.3.6.1.4.1.866.20.1.25.45.21 |
fcwFrDlcSetupAlarmThresholdSeuil : A% seuil alarmique d'acceptation de
connexions FR en terme de ressourcesrw INTEGER .1.3.6.1.4.1.866.20.1.25.45.22 |
fcwFrDlcSetupDiscardThresholdR% Seuil de refus d'etablissement des DLC VBR-NRT
(pourcentage des ressources : 100 = pas de
surbooking)rw INTEGER .1.3.6.1.4.1.866.20.1.25.45.23 |
fcwFrVoiceFrameSizeLongueur trames voixrw INTEGER .1.3.6.1.4.1.866.20.1.25.45.40 |
fcwFrVoiceMaxTransitDelayTemps de transit maximum de bout en bout des
communications de type voix en millisecondesrw INTEGER .1.3.6.1.4.1.866.20.1.25.45.41 |
fcwFrCongestionCheckTimerTempo de surveillance de la congestion du reseau
FR (milisecondes)rw INTEGER .1.3.6.1.4.1.866.20.1.25.45.50 |
fcwFrCongestionCountCritere de decongestion du reseau FRrw INTEGER .1.3.6.1.4.1.866.20.1.25.45.51 |
fcwFrCirTimerTempo echantillonage CIR (millisecondes)rw INTEGER .1.3.6.1.4.1.866.20.1.25.45.52 |
fcwFrEventOutputFiltrage des EVRrw Enumeration .1.3.6.1.4.1.866.20.1.25.45.53 |
fcwFrSlowingDownThresholdS0 seuil de ralentissement du trafic sans
positionner de bits de congestion (0 = pas de
ralentissement)rw INTEGER .1.3.6.1.4.1.866.20.1.25.45.54 |
fcwFrFecnBecnOfDeFramesThresholdS1 seuil de positionnement des bits FECN BECN sur
les trames DE (0 = calcule en fct de la vitesse de
la ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.25.45.55 |
fcwFrFecnBecnOfAllFramesThresholdS2 seuil de positionnement des bits FECN BECN sur
toutes les trames (0 = calcule en fct de la
vitesse de la ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.25.45.56 |
fcwFrDeFramesDiscardThresholdS3 seuil de rejet des trames DE (0 = calcule en
fct de la vitesse de la ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.25.45.57 |
fcwFrAllFramesDiscardThresholdS4 seuil de rejet de toutes les trames (0 =
calcule en fct de la vitesse de la ligne)rw INTEGER .1.3.6.1.4.1.866.20.1.25.45.58 |
fcwAddressConversion OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.25.48 |
fcwAddrConvIncomingCallTableThis table defines, for the incoming call packets,
the association between an X121 address pattern to
be converted and the substituted address pattern.
This substitution is used on the logical ports
when *ConversionAimedPoint is set to 'on',
*ConversionIncomingCall is not set to 'off' or
*ConversionAddressCheck is set to 'onIncomingCall'
or 'onIncomingCallAndOutgoingCall'.
Two digits have special meanings :
The digit 'C' ('$' on the equipment configurator)
when simultaneously used in the address pattern
to be converted AND in the converted address
pattern matches any single digit which will be
reported in the converted address.
Example :
fcwConvInExternalAddr = 1234C6C8FFFFFFF
fcwConvInConvertedAddr = 900010CCFFFFFFF
1234567890 is converted to 9000105790
The digit 'D' ('?' on the equipment configurator)
when used in the address pattern to be
converted matches any single digit which will
not be present in the converted address.
Example :
fcwConvInExternalAddr = 1234DD78FFFFFFF
fcwConvInConvertedAddr = 9000FFFFFFFFFFF
1234567890 is converted to 900090,
1234007890 is converted to 900090,
1234560090 is not converted. SEQUENCE OF FcwAddrConvIncomingCallEntry .1.3.6.1.4.1.866.20.1.25.48.1 |
fcwAddrConvIncomingCallEntryAn entry of fcwAddrConvIncomingCallTable. FcwAddrConvIncomingCallEntry .1.3.6.1.4.1.866.20.1.25.48.1.1 |
fcwConvInExternalAddrThe value of this object identifies one and only
one external address pattern to be converted. The
value may contain up to 15 digits (digits 0..9,
special digits C and D). The value must be
completed with 'F' digits for a total of 16
digits. The equipment configurator does not need
final completion. The default value is 'FF FF FF
FF FF FF FF FF' meaning 'empty value' (blank value
on the equipment configurator). The conversion
mechanism is explained in the description of this
table.ro OCTET STRING .1.3.6.1.4.1.866.20.1.25.48.1.1.1 |
fcwConvInStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.25.48.1.1.2 |
fcwConvInConvertedAddrThe value of this object defines the converted
address pattern. The value may contain up to 15
digits (digits 0..9, special digit C). The value
must be completed with 'F' digits for a total of
16 digits. The equipment configurator does not
need final completion. The default value is 'FF FF
FF FF FF FF FF FF' meaning 'empty value' (blank
value on the equipment configurator). The
conversion mechanism is explained in the
description of this table.rw OCTET STRING .1.3.6.1.4.1.866.20.1.25.48.1.1.3 |
fcwConvInOrderNumNo ordrerw INTEGER .1.3.6.1.4.1.866.20.1.25.48.1.1.4 |
fcwAddrConvOutgoingCallTableThis table defines, for the outgoing call packets,
the association between an X121 address pattern to
be converted and the substituted address pattern.
This substitution is used on the logical ports
when *ConversionOutgoingCall is not set to 'off'
or *ConversionAddressCheck is set to
'onOutgoingCall' or
'onIncomingCallAndOutgoingCall'.
Two digits have special meanings :
The digit 'C' ('$' on the equipment configurator)
when simultaneously used in the address pattern
to be converted AND in the converted address
pattern matches any single digit which will be
reported in the converted address.
Example :
fcwConvOutExternalAddr = 1234C6C8FFFFFFF
fcwConvOutConvertedAddr = 900010CCFFFFFFF
1234567890 is converted to 9000105790
The digit 'D' ('?' on the equipment configurator)
when used in the address pattern to be
converted matches any single digit which will
not be present in the converted address.
Example :
fcwConvOutExternalAddr = 1234DD78FFFFFFF
fcwConvOutConvertedAddr = 9000FFFFFFFFFFF
1234567890 is converted to 900090,
1234007890 is converted to 900090,
1234560090 is not converted. SEQUENCE OF FcwAddrConvOutgoingCallEntry .1.3.6.1.4.1.866.20.1.25.48.2 |
fcwAddrConvOutgoingCallEntryAn entry of fcwAddrConvOutgoingCallTable. FcwAddrConvOutgoingCallEntry .1.3.6.1.4.1.866.20.1.25.48.2.1 |
fcwConvOutExternalAddrThe value of this object identifies one and only
one external address pattern to be converted. The
value may contain up to 15 digits (digits 0..9,
special digits C and D). The value must be
completed with 'F' digits for a total of 16
digits. The equipment configurator does not need
final completion. The default value is 'FF FF FF
FF FF FF FF FF' meaning 'empty value' (blank value
on the equipment configurator). The conversion
mechanism is explained in the description of this
table.ro OCTET STRING .1.3.6.1.4.1.866.20.1.25.48.2.1.1 |
fcwConvOutStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.25.48.2.1.2 |
fcwConvOutConvertedAddrThe value of this object defines the converted
address pattern. The value may contain up to 15
digits (digits 0..9, special digit C). The value
must be completed with 'F' digits for a total of
16 digits. The equipment configurator does not
need final completion. The default value is 'FF FF
FF FF FF FF FF FF' meaning 'empty value' (blank
value on the equipment configurator). The
conversion mechanism is explained in the
description of this table.rw OCTET STRING .1.3.6.1.4.1.866.20.1.25.48.2.1.3 |
fcwConvOutOrderNumNo ordrerw INTEGER .1.3.6.1.4.1.866.20.1.25.48.2.1.4 |
fcwAddrConvMultiCriterionInCallTable SEQUENCE OF FcwAddrConvMultiCriterionInCallEntry .1.3.6.1.4.1.866.20.1.25.48.3 |
fcwAddrConvMultiCriterionInCallEntryAn entry of fcwAddrConvMultiCriterionInCallTable. FcwAddrConvMultiCriterionInCallEntry .1.3.6.1.4.1.866.20.1.25.48.3.1 |
fcwConvMultiInConvIDConversion IDro OCTET STRING .1.3.6.1.4.1.866.20.1.25.48.3.1.1 |
fcwConvMultiInExternalAddrPrefixe adresse exterieurro OCTET STRING .1.3.6.1.4.1.866.20.1.25.48.3.1.2 |
fcwConvMultiInStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.25.48.3.1.3 |
fcwConvMultiInConvertedAddrPrefixe convertirw OCTET STRING .1.3.6.1.4.1.866.20.1.25.48.3.1.4 |
fcwConvMultiInOrderNumNo ordrerw INTEGER .1.3.6.1.4.1.866.20.1.25.48.3.1.5 |
fcwAddrConvMultiCriterionOutCallTable SEQUENCE OF FcwAddrConvMultiCriterionOutCallEntry .1.3.6.1.4.1.866.20.1.25.48.4 |
fcwAddrConvMultiCriterionOutCallEntryAn entry of fcwAddrConvMultiCriterionOutCallTable. FcwAddrConvMultiCriterionOutCallEntry .1.3.6.1.4.1.866.20.1.25.48.4.1 |
fcwConvMultiOutConvIDConversion IDro OCTET STRING .1.3.6.1.4.1.866.20.1.25.48.4.1.1 |
fcwConvMultiOutExternalAddrPrefixe adresse exterieurro OCTET STRING .1.3.6.1.4.1.866.20.1.25.48.4.1.2 |
fcwConvMultiOutStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.25.48.4.1.3 |
fcwConvMultiOutConvertedAddrPrefixe convertirw OCTET STRING .1.3.6.1.4.1.866.20.1.25.48.4.1.4 |
fcwConvMultiOutOrderNumNo ordrerw INTEGER .1.3.6.1.4.1.866.20.1.25.48.4.1.5 |
fcwAddrConvCondOutgoingCallTable SEQUENCE OF FcwAddrConvCondOutgoingCallEntry .1.3.6.1.4.1.866.20.1.25.48.5 |
fcwAddrConvCondOutgoingCallEntryAn entry of fcwAddrConvCondOutgoingCallTable. FcwAddrConvCondOutgoingCallEntry .1.3.6.1.4.1.866.20.1.25.48.5.1 |
fcwConvCondOutExternalAddrThe value of this object identifies one and only
one external address pattern to be converted. The
value may contain up to 12 digits (digits 0..9,
special digits C and D). The equipment
configurator does not need final completion. The
default value is 'FF FF FF FF FF FF' meaning
'empty value' (blank value on the equipment
configurator). The conversion mechanism is
explained in the description of
fcwAddrConvOutgoingCallTable.ro OCTET STRING .1.3.6.1.4.1.866.20.1.25.48.5.1.1 |
fcwConvCondOutTryOnThe value of this object defines which kind of LP
in the route table the entry is associated with :
all : this conversion is for both primary LP
with routing type normalClear1, and
associated backup LP,
normalClear1 : this conversion is only for
primary LP with routing type normalClear1,
backup : this conversion is only for backups of
primary LP with routing type normalClear1,
The default value is 'all'.ro Enumeration .1.3.6.1.4.1.866.20.1.25.48.5.1.2 |
fcwConvCondOutStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.25.48.5.1.3 |
fcwConvCondOutConvertedAddrThe value of this object defines the converted
address pattern. The value may contain up to 12
digits (digits 0..9, special digit C). The
equipment configurator does not need final
completion. The default value is 'FF FF FF FF FF'
meaning 'empty value' (blank value on the
equipment configurator The conversion mechanism is
explained in the description of
fcwAddrConvOutgoingCallTable.rw OCTET STRING .1.3.6.1.4.1.866.20.1.25.48.5.1.4 |
fcwRouteTableThis table defines the routes which may be used by
the call packets according to the routing tables.
One route is composed of one or more logical
ports. Most of times each logical port has only
one channel and it is not necessary to indicates
the channel identifier. SEQUENCE OF FcwRouteEntry .1.3.6.1.4.1.866.20.1.25.50 |
fcwRouteEntryAn entry of fcwRouteTable. FcwRouteEntry .1.3.6.1.4.1.866.20.1.25.50.1 |
fcwRoutRouteIdThe value of this object identifies one and only
one route. One route may be composed of one or
several logical ports. The possible values are :
'0..199'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.25.50.1.1 |
fcwRoutLogPortIdThe value of this object identifies one of the
logical ports which compose the route defined by
fcwRoutRouteId. The possible values are :
'0..131'. If it is unused, the value of this
parameter is '255'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.25.50.1.2 |
fcwRoutChannelIdThe value of this object identifies one of the
channels available on the logical port defined by
fcwRoutLogPortId. Most of times each logical port
has only one channel and it is not necessary to
indicates this channel identifier.
In some very particular cases a logical port may
have several channels and the equipment is not
able to choose the right one. So the channel
identifier must be indicated.
This happens, for instance, with a Frame Relay
logical port which has several Permanent Virtual
Circuit end points and when it is impossible to
find which one must be used : the corresponding
DLCI (Data Link Connection Identifier) must be
indicated in fcwRoutChannelId.
The possible values are : '0..1023'. If it is
unused, the value of this parameter is
'65535'. The default value is '65535'.ro INTEGER .1.3.6.1.4.1.866.20.1.25.50.1.3 |
fcwRoutStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.25.50.1.4 |
fcwRoutTypeThe value of this object indicates how the
equipment will try to use this logical port (or
this couple [logical port, channel]) which
composes this route.
The following combinations are possible :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|Route|LP|Type| Routing description |
|~~~~~|~~|~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| 1 | 1| n | -> on one LP |
|~~~~~|~~|~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| 2 | 1| n | -> 1 : on one main LP |
| 2 | 2| b1 | \ |
| 2 | 3| b1 | > 2 : on three equal |
| 2 | 4| b1 | / priority backup LPs |
|~~~~~|~~|~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| 3 | 1| n | \ |
| 3 | 2| n | | |
| 3 | 3| n | > on five equal priority LPs |
| 3 | 4| n | | |
| 3 | 5| n | / |
|~~~~~|~~|~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| 4 | 1| n | -> 1 : on one main LP |
| 4 | 2| b1 | -> 2 : on one first backup LP |
| 4 | 3| b2 | -> 3 : on one second backup LP |
| 4 | 4| b3 | -> 4 : on one third backup LP |
|~~~~~|~~|~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| 5 | 1| n | \ on three equal |
| 5 | 2| n | > 1 : priority main LPs |
| 5 | 3| n | / |
| 5 | 4| b1 | -> 2 : on one backup LP |
|~~~~~|~~|~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| 8 | 1| nM | each module of the equipment |
| 8 | 2| b1 | considers its own LPs as having |
| 8 |11| b2 | a higher priority than the |
| 8 | 3| b3 | LPs of the other modules |
| 8 |21| b4 | (see below) |
| 8 |12| b5 | |
|~~~~~|~~|~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| 9 | 1| nC | -> 1 : on one main LP |
|~~~~~|~~|~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| 10 | 1| nC | -> 1 : on one main LP |
| 10 | 2| b1 | -> 2 : on one first backup LP |
| 10 | 3| b2 | -> 3 : on one second backup LP |
| 10 | 4| b3 | -> 4 : on one third backup LP |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Types : n : normal, nM : normalPriorityModule, b1
: backup1, b2 : backup2, b3 : backup3, b4 :
backup4, b5 : backup5, dynamic, backupDynamic,
nC : normalClear1.
Interpretation of the route 8 : In this example
let us suppose that LP 1, 2 and 3 belongs to
the module 0, 11 and 12 to the module 1, and 21
to the module 2. The route 8 becomes :
on the module 0 :
LP : 1 2 3 11 21 12
Type : n b1 b2 b3 b4 b5
on the module 1 :
LP : 11 12 1 2 3 21
Type : n b1 b2 b3 b4 b5
on the module 2 :
LP : 21 1 2 11 3 12
Type : n b1 b2 b3 b4 b5
Interpretation of the route 9 : there must be at
least 1 valid entry with try on = normalClear1
(or all) in the Clear cause/diagnostic table.
The address is converted according to that
entry.
Interpretation of the route 10 : there must be at
least 1 valid entry with try on = normalClear1
and 1 with try on = backup (or 1 with all) in
the Clear cause/diagnostic table. The address
is converted according to that entry.
The default value is 'normal'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.50.1.5 |
fcwDnicRoutingTableThis table is the call packets routing table for
the Data Network Identifier Code (DNIC) part of
the X121 called address. SEQUENCE OF FcwDnicRoutingEntry .1.3.6.1.4.1.866.20.1.25.60 |
fcwDnicRoutingEntryAn entry of fcwDnicRoutingTable. FcwDnicRoutingEntry .1.3.6.1.4.1.866.20.1.25.60.1 |
fcwDnicDataNetworkIdentifierCodeThe value of this object is the Data Network
Identifier Code (DNIC) part of the X121 called
address from the call packet to be routed. This
address , with a DNIC format as explained below,
may contain up to 4 digits (0..9, B).
The digit 'B' (character '*' on the equipment
configurator) have special meaning :
'B' matches any address. When used it must be
the only digit specified (with final
completion as explained below). The
associated route is used only if the
equipment does not find another
possibility in this table.
There must be only one route for each specified
address but partial addresses are
accepted.
Example : If route 1 is specified for DNIC
'1234', route 2 for DNIC '12' and route 3
for DNIC 'B', call packets to DNIC 1234
are routed on the route 1, call packets to
DNIC 12xx (xx different from 34) are
routed on the route 2 and all others are
routed on the route 3.
The value must be completed with 'F' digits for a
total of 4 digits. The equipment configurator does
not need final completion. The default value is
'FF FF' meaning 'empty value' (blank value on the
equipment configurator).
Address format :
Eight digits (0..9) of X121 format are used as
the network address numbering plan. This
numbering plan has a hierarchical structure
:
4 digits define the Data Network Identifier
Code (DNIC) : DNIC identifies the region
to which belongs the equipment,
2 digits define the zone (ZO) : ZO
identifies the equipment inside the
region,
2 digits define the subscriber (SB) : SB
identifies a subscriber of the equipment.
Therefore each subscriber is completely
identified by its address of the form DNIC
ZO SB and each equipment by its address of
the form DNIC ZO.ro OCTET STRING .1.3.6.1.4.1.866.20.1.25.60.1.1 |
fcwDnicRouteIdThe value of this object defines the route
associated to this address. This route must exist
in fcwRouteTable. The authorized values are
'0..199'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.25.60.1.2 |
fcwDnicStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.25.60.1.3 |
fcwZoRoutingTableThis table is the call packets routing table for
the Zone (ZO) part of the X121 called address. SEQUENCE OF FcwZoRoutingEntry .1.3.6.1.4.1.866.20.1.25.61 |
fcwZoRoutingEntryAn entry of fcwZoRoutingTable. FcwZoRoutingEntry .1.3.6.1.4.1.866.20.1.25.61.1 |
fcwZoZoneThe value of this object is the Zone (ZO) part of
the X121 called address from the call packet to be
routed. This address , with a ZO format as
explained below, must contains 2 digits (0..9, B).
The digit 'B' (character '*' on the equipment
configurator) have special meaning :
'B' matches any address. When used it must be
the only digit specified (with final
completion as explained below). The
associated route is used only if the
equipment does not find another
possibility in this table.
There must be only one route for each specified
address.
Example : If route 1 is specified for ZO '12',
route 2 for ZO 'B', call packets to ZO 12
are routed on the route 1 and all others
are routed on the route 2.
The value must be completed with 'F' digits for a
total of 2 digits (here only if the digit 'B' is
used). The equipment configurator does not need
final completion. The default value is 'FF'
meaning 'empty value' (blank value on the
equipment configurator).
Address format :
Eight digits (0..9) of X121 format are used as
the network address numbering plan. This
numbering plan has a hierarchical structure
:
4 digits define the Data Network Identifier
Code (DNIC) : DNIC identifies the region
to which belongs the equipment,
2 digits define the zone (ZO) : ZO
identifies the equipment inside the
region,
2 digits define the subscriber (SB) : SB
identifies a subscriber of the equipment.
Therefore each subscriber is completely
identified by its address of the form DNIC
ZO SB and each equipment by its address of
the form DNIC ZO.ro OCTET STRING .1.3.6.1.4.1.866.20.1.25.61.1.1 |
fcwZoRouteIdThe value of this object defines the route
associated to this address. This route must exist
in fcwRouteTable. The authorized values are
'0..199'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.25.61.1.2 |
fcwZoStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.25.61.1.3 |
fcwSbRoutingTableThis table is the call packets routing table for
the Subscriber (SB) part of the X121 called
address. SEQUENCE OF FcwSbRoutingEntry .1.3.6.1.4.1.866.20.1.25.62 |
fcwSbRoutingEntryAn entry of fcwSbRoutingTable. FcwSbRoutingEntry .1.3.6.1.4.1.866.20.1.25.62.1 |
fcwSbSubscriberNumberThe value of this object is the Subscriber (SB)
part of the X121 called address from the call
packet to be routed. This address , with a SB
format as explained below, must contains 2 digits
(0..9, B).
The digit 'B' (character '*' on the equipment
configurator) have special meaning :
'B' matches any address. When used it must be
the only digit specified (with final
completion as explained below). The
associated route is used only if the
equipment does not find another
possibility in this table.
There must be only one route for each specified
address.
Example : If route 1 is specified for SB '12',
route 2 for SB 'B', call packets to SB 12
are routed on the route 1 and all others
are routed on the route 2.
The value must be completed with 'F' digits for a
total of 2 digits (here only if the digit 'B' is
used). The equipment configurator does not need
final completion. The default value is 'FF'
meaning 'empty value' (blank value on the
equipment configurator).
Address format :
Eight digits (0..9) of X121 format are used as
the network address numbering plan. This
numbering plan has a hierarchical structure
:
4 digits define the Data Network Identifier
Code (DNIC) : DNIC identifies the region
to which belongs the equipment,
2 digits define the zone (ZO) : ZO
identifies the equipment inside the
region,
2 digits define the subscriber (SB) : SB
identifies a subscriber of the equipment.
Therefore each subscriber is completely
identified by its address of the form DNIC
ZO SB and each equipment by its address of
the form DNIC ZO.ro OCTET STRING .1.3.6.1.4.1.866.20.1.25.62.1.1 |
fcwSbRouteIdThe value of this object defines the route
associated to this address. This route must exist
in fcwRouteTable. The authorized values are
'0..199'. The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.25.62.1.2 |
fcwSbStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.25.62.1.3 |
fcwServices OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.25.70 |
fcwSerCompression OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.25.70.1 |
fcwSCompModule0CompressedVcCountThe value of this object defines the maximum
number of virtual circuits which may be
simultaneously compressed by the module 0 of the
equipment. The compression of virtual circuits may
be enabled at the logical port level. The
authorized values are '0..2048'. The default value
is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.70.1.1 |
fcwSCompModule1CompressedVcCountThe value of this object defines the maximum
number of the virtual channels that may be
simultaneously compressed by the module 0 of the
equipment. The authorized values are '0..2048'.
The default value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.70.1.2 |
fcwSCompModule2CompressedVcCountThe value of this object defines the maximum
number of the virtual channels that may be
simultaneously compressed by the module 0 of the
equipment. The authorized values are '0..2048'.
The default value is '2'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.70.1.3 |
fcwSCompAlgorithmSelectionThe value of this object which compression
algorithm is used by the equipment. It can use an
algorithm compatible to which one used on
equipment with version 9 software or version 10
software. It can also choise the right one
automatically. The default value is 'auto'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.70.1.4 |
fcwSerReliableVirtualCircuits OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.25.70.2 |
fcwSRvcReliableVcCountThe value of this object defines the maximum
number of simultaneously reliable virtual circuits
in the equipment. The reliable virtual circuits
may be enabled at the logical port level. The
authorized values are '0..255. The default value
is '20'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.70.2.1 |
fcwSRvcFirstDataPacketTimerThe value of this object is the waiting time
between the call connected packet and the first
data packet which there is clearing beyond. This
parameter is pertinent only if the fast select
facility is used. The authorized values are
'1..254'. The default value is '12'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.70.2.2 |
fcwSRvcRestoreOutgoingCallRetryCountThe value of this object indicates how many times
the equipment will try to send a call packet to
restore the virtual circuit wich has been
unintentionnaly cleared. The possible values are :
'1..254'. The default value is '10'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.70.2.3 |
fcwSRvcRestoreMinimumRecallTimerThe value of this object specifies the minimum
recall time (in seconds) between two successive
calls. The authorized values are '1..254'. The
default value is '20'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.70.2.4 |
fcwSRvcRestoreIncomingCallTimerThe value of this object is the time between a new
connection request and the reception of the
corresponding call connected packet which there is
clearing beyond. The authorized values are
'10..2540'. The default value is '120'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.70.2.5 |
fcwSRvcRestoreOutgoingCallDelayWhen it is not possible to restore the network
connection, the standard forces to not use the
called reference number during the value of this
object. The authorized values are '10..2540'. The
default value is '120'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.70.2.6 |
fcwSRvcKWindowSizeThe value of this object indicates the maximum
number (K) of sequentially numbered I frames that
the equipment may have outstanding (i.e..
unacknowledged) at any given time. The authorized
values are '1..127'. The default value is '10'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.70.2.7 |
fcwSRvcFastSelectUseThe value of this object specifies whether the
equipment uses the fast select facility or not.
The default value is 'onk'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.70.2.8 |
fcwSRvcOutputMarkersThe value of this object specifies the behaviour
of the equipment with respect to the outgoing
facility markers. The authorized values are :
noCheck : no checking,
remove : the markers are not transmitted,
check : according to the following table :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| packet | facility marker |
| |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | 0000 (1) | 00FF (2) | 000F (3) |
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call |no checking |clearing (5)|no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call | | | |
|connected|clearing (4)|no checking |no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| clear | - | - |no checking|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(1) : registration codes,
non-x25 facilities provided by the
network in case of intranetwork calls,
non-x25 facilities provided by the
network to which the calling DTE is
connected in case of internetwork
calls
(2) : non-x25 facilities provided by the
network to which the calling DTE is
connected in case of intranetwork
calls
(3) : CCITT-specified DTE facilities
(4) : diagnostic to local equipment = 03 42,
diagnostic to remote equipment = 11 42
(5) : diagnostic to local equipment = 03 42
The default value is 'noCheck'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.70.2.9 |
fcwSRvcConversionAimedPointThe value of this object indicates whether the
'aimed point' address conversion is enabled or
not. This conversion consists in making the
routing process work not with the called address
from the call packet but with a substituted
address according to the address conversion table
(see fcwAddrConvIncomingCallTable). Therefore this
reduces the number of entries of the routing
tables if several called addresses are converted
to same 'aimed point' address. The default value
is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.70.2.10 |
fcwSRvcConversionIncomingCallThe value of this object indicates which address
field are converted on an incoming call. The
authorized values are :
off : no address field conversion,
callingAddress : conversion of the calling
address field according to the contains of
fcwAddrConvIncomingCallTable,
calledAddress : conversion of the called
address field according to the contains of
fcwAddrConvIncomingCallTable,
callingAddressAndCalledAddress : conversion of
the calling and called address fields
according to the contains of
fcwAddrConvIncomingCallTable.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.70.2.11 |
fcwSRvcConversionOutgoingCallThe value of this object indicates which address
field are converted on an outgoing call. The
authorized values are :
off : no address field conversion,
callingAddress : conversion of the calling
address field according to the contains of
fcwAddrConvOutgoingCallTable,
calledAddress : conversion of the called
address field according to the contains of
fcwAddrConvOutgoingCallTable,
callingAddressAndCalledAddress : conversion of
the calling and called address fields
according to the contains of
fcwAddrConvOutgoingCallTable.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.70.2.12 |
fcwSRvcConversionAddressCheckThe value of this object indicates the behaviour
of the equipment when a requested address
conversion can not be made because the address is
not found in the address conversion tables
(fcwAddrConvIncomingCallTable or
fcwAddrConvOutgoingCallTable). In this case the
call will be cleared when 'checking' is enabled.
The authorized values are :
off : no checking,
onIncomingCall : checking on incoming calls,
onOutgoingCall : checking on outgoing calls,
onIcomingCallAndOutgoingCall : checking on
incoming and outgoing calls.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.70.2.13 |
fcwSerReselectionX29 OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.25.70.3 |
fcwSResLogChannelCountThe value of this object is the number of logical
Channels. The authorized values are '0..255. The
default value is '200'.rw INTEGER .1.3.6.1.4.1.866.20.1.25.70.3.1 |
fcwSResProtocolIdentifierTransmissionThe value of this object indicates whether the
protocol identifier is transmitted or not. The
default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.70.3.2 |
fcwSResConversionAimedPointThe value of this object indicates whether the
'aimed point' address conversion is enabled or
not. This conversion consists in making the
routing process work not with the called address
from the call packet but with a substituted
address according to the address conversion table
(see fcwAddrConvIncomingCallTable). Therefore this
reduces the number of entries of the routing
tables if several called addresses are converted
to same 'aimed point' address. The default value
is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.70.3.10 |
fcwSResConversionIncomingCallThe value of this object indicates which address
field are converted on an incoming call. The
authorized values are :
off : no address field conversion,
callingAddress : conversion of the calling
address field according to the contains of
fcwAddrConvIncomingCallTable,
calledAddress : conversion of the called
address field according to the contains of
fcwAddrConvIncomingCallTable,
callingAddressAndCalledAddress : conversion of
the calling and called address fields
according to the contains of
fcwAddrConvIncomingCallTable.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.70.3.11 |
fcwSResConversionOutgoingCallThe value of this object indicates which address
field are converted on an outgoing call. The
authorized values are :
off : no address field conversion,
callingAddress : conversion of the calling
address field according to the contains of
fcwAddrConvOutgoingCallTable,
calledAddress : conversion of the called
address field according to the contains of
fcwAddrConvOutgoingCallTable,
callingAddressAndCalledAddress : conversion of
the calling and called address fields
according to the contains of
fcwAddrConvOutgoingCallTable.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.70.3.12 |
fcwSResConversionAddressCheckThe value of this object indicates the behaviour
of the equipment when a requested address
conversion can not be made because the address is
not found in the address conversion tables
(fcwAddrConvIncomingCallTable or
fcwAddrConvOutgoingCallTable). In this case the
call will be cleared when 'checking' is enabled.
The authorized values are :
off : no checking,
onIncomingCall : checking on incoming calls,
onOutgoingCall : checking on outgoing calls,
onIcomingCallAndOutgoingCall : checking on
incoming and outgoing calls.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.25.70.3.13 |
fcwSerDynamicRouting OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.25.70.4 |
fcwSDynDynamicRoutingMode de fonctionnement RADrw Enumeration .1.3.6.1.4.1.866.20.1.25.70.4.1 |
fcwSDynPasswordMode de passe fonction d'exploitation RADrw DisplayString .1.3.6.1.4.1.866.20.1.25.70.4.2 |
fcwSDynNeighborMaxCountNb max de LSPDU memoriseesrw INTEGER .1.3.6.1.4.1.866.20.1.25.70.4.3 |
fcwSDynLspAgingTimerDuree de stockage d'un LSPDUrw INTEGER .1.3.6.1.4.1.866.20.1.25.70.4.4 |
fcwSDynLspRetransRequestTimerDuree de stockage minimum declanchant une demande
de mise a jour d'un LSPDUrw INTEGER .1.3.6.1.4.1.866.20.1.25.70.4.5 |
fcwSDynLspRetransmissionTimerPeriode de diffusion de la topologierw INTEGER .1.3.6.1.4.1.866.20.1.25.70.4.6 |
fcwSDynRouteCalculationTimerPeriode de calcul des routesrw INTEGER .1.3.6.1.4.1.866.20.1.25.70.4.7 |
fcwSDynRouteCalculLockingTimerDuree de verrouillage du calcul des routesrw INTEGER .1.3.6.1.4.1.866.20.1.25.70.4.8 |
fcwSerClearAnalysisTable SEQUENCE OF FcwSerClearAnalysisEntry .1.3.6.1.4.1.866.20.1.25.70.5 |
fcwSerClearAnalysisEntryAn entry of fcwSerClearAnalysisTable. FcwSerClearAnalysisEntry .1.3.6.1.4.1.866.20.1.25.70.5.1 |
fcwSClearAnalysIdThe value of this object identifies one and only
one entry in the table (index)ro INTEGER .1.3.6.1.4.1.866.20.1.25.70.5.1.1 |
fcwSClearAnalysStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.25.70.5.1.2 |
fcwSClearAnalysCauseThe value of this object indicates which cause(s)
is taken into account in case of clear indication.
Possible values are :
00..FF
TT (all DTE clear indications)
TC (all DCE clear indications)
* (any clearing cause)rw DisplayString .1.3.6.1.4.1.866.20.1.25.70.5.1.3 |
fcwSClearAnalysDiagThe value of this object indicates which
diagnostic is taken into account in case of clear
indication.
Possible values are :
00..FF
* (any clearing diagnostic)rw DisplayString .1.3.6.1.4.1.866.20.1.25.70.5.1.4 |
fcwSerQOSX25 OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.25.70.10 |
fcwSQOSX25Table SEQUENCE OF FcwSQOSX25Entry .1.3.6.1.4.1.866.20.1.25.70.10.1 |
fcwSQOSX25EntryAn entry of fcwSQOSX25Table. FcwSQOSX25Entry .1.3.6.1.4.1.866.20.1.25.70.10.1.1 |
fcwSQOSX25CalledAddressCalled Addressro OCTET STRING .1.3.6.1.4.1.866.20.1.25.70.10.1.1.1 |
fcwSQOSX25CallingAddressCalling Addressro OCTET STRING .1.3.6.1.4.1.866.20.1.25.70.10.1.1.2 |
fcwSQOSX25CUDProfileIdCUD Profile Idro INTEGER .1.3.6.1.4.1.866.20.1.25.70.10.1.1.3 |
fcwSQOSX25StatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.25.70.10.1.1.4 |
fcwSQOSX25PriorityLevelPriority Levelrw INTEGER .1.3.6.1.4.1.866.20.1.25.70.10.1.1.5 |
fcwSQOSX25QOSProfileIdQOS Profile Idrw INTEGER .1.3.6.1.4.1.866.20.1.25.70.10.1.1.6 |
fcwSQOSX25CosCOSrw Enumeration .1.3.6.1.4.1.866.20.1.25.70.10.1.1.7 |
fcwSQOSX25TrafficManagementStrategyTraffic Management Strategyrw Enumeration .1.3.6.1.4.1.866.20.1.25.70.10.1.1.8 |
fcwSCUDProfilesTable SEQUENCE OF FcwSCUDProfilesEntry .1.3.6.1.4.1.866.20.1.25.70.10.2 |
fcwSCUDProfilesEntryAn entry of fcwSCUDProfilesTable. FcwSCUDProfilesEntry .1.3.6.1.4.1.866.20.1.25.70.10.2.1 |
fcwSCUDProfilesIdCUD Profile Idro INTEGER .1.3.6.1.4.1.866.20.1.25.70.10.2.1.1 |
fcwSCUDProfilesStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.25.70.10.2.1.2 |
fcwSCUDProfilesCUDDonnees d'appel hexa CUDrw OCTET STRING .1.3.6.1.4.1.866.20.1.25.70.10.2.1.3 |
fcwSQOSProfilesTable SEQUENCE OF FcwSQOSProfilesEntry .1.3.6.1.4.1.866.20.1.25.70.10.3 |
fcwSQOSProfilesEntryAn entry of fcwSQOSProfilesTable. FcwSQOSProfilesEntry .1.3.6.1.4.1.866.20.1.25.70.10.3.1 |
fcwSQOSProfilesIdQOS Profile Idro INTEGER .1.3.6.1.4.1.866.20.1.25.70.10.3.1.1 |
fcwSQOSProfilesStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.25.70.10.3.1.2 |
fcwSQOSProfilesCIRCIRrw INTEGER .1.3.6.1.4.1.866.20.1.25.70.10.3.1.3 |
fcwSQOSProfilesCIRminCIRminrw INTEGER .1.3.6.1.4.1.866.20.1.25.70.10.3.1.4 |
fcwSQOSProfilesBcBcrw INTEGER .1.3.6.1.4.1.866.20.1.25.70.10.3.1.5 |
fcwSQOSProfilesBeBerw INTEGER .1.3.6.1.4.1.866.20.1.25.70.10.3.1.6 |
fcVirtualPorts OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.30 |
fcvVirtualPortTableThis table defines the virtual ports.
Through a virtual port the bridge and the IP, IPX
and CLNP routers can communicate with bridges and
routers taking place inside a particular virtual
network. These communications may use a Local Area
Network (LAN), namely the virtual network matches
the LAN, or Wide Area Networks (WAN), namely the
virtual network matches a group of remote bridges
or routers.
Each module of the equipment has its own virtual
ports. The module 0 can enable bridge forwarding,
IP (Internet Protocol) routing, IPX (Internetwork
Packet eXchange : Novell protocol) routing and
CLNP (ConnectionLess Network Protocol) routing.
The modules 1 and 2 can only act as IP host. So
each of these two modules needs one remote VP when
its SNMP agent must exchange SNMP datas with an
SNMP manager.
Set any writable object(s) of this table to valid
value(s) with a new index value to create an entry
(the objects of the entry not present in this SET
REQUEST will take their default values). Set
fcvVpStatus to 'invalid' to delete an entry. SEQUENCE OF FcvVirtualPortEntry .1.3.6.1.4.1.866.20.1.30.1 |
fcvVirtualPortEntryAn entry of fcvVirtualPortTable. FcvVirtualPortEntry .1.3.6.1.4.1.866.20.1.30.1.1 |
fcvVpVirtualPortIdThe value of this object identifies one and only
one virtual port. Through a virtual port the
bridge and the IP, IPX and CLNP routers can
communicate with bridges and routers taking place
inside a particular virtual network. These
communications may use a Local Area Network (LAN),
namely the virtual network matches the LAN, or
Wide Area Networks (WAN), namely the virtual
network matches a group of remote bridges or
routers.
This is a decimal integer in the range 0 to 11.ro INTEGER .1.3.6.1.4.1.866.20.1.30.1.1.1 |
fcvVpStatusThe value of this object indicates the state of
the entry of this table. It must be set to
'invalid' to delete the entry.
The default value is 'valid'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.1.1.2 |
fcvVpTypeThe value of this object indicates whether this
virtual port is:
local : the virtual network is a Local Area
Network (LAN),
or remote : the virtual network is a group of
remote equipments which may be reached
through Wide Area Networks (WAN).
The default value is 'remote'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.1.1.3 |
fcvVpModuleIdThe value of this object indicates the module of
the equipment to which this virtual port belongs
to.
Each module of the equipment has its own virtual
ports. The module 0 can enable bridge forwarding,
IP (Internet Protocol) routing, IPX (Internetwork
Packet eXchange : Novell protocol) routing and
CLNP (ConnectionLess Network Protocol) routing.
The modules 1 and 2 can only act as IP host. So
each of these two modules needs one remote VP when
its SNMP agent must exchange SNMP datas with an
SNMP manager.
This is a decimal integer in the range 0 to 2.
The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.30.1.1.4 |
fcvLocalVirtualPorts OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.30.10 |
fcvLocalVirtualPortTableThis table defines the characteristics of the
local virtual ports.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcvVirtualPortTable, to one instance of fcvVpType
equal to 'local'). SEQUENCE OF FcvLocalVirtualPortEntry .1.3.6.1.4.1.866.20.1.30.10.1 |
fcvLocalVirtualPortEntryAn entry of fcvLocalVirtualPortTable. FcvLocalVirtualPortEntry .1.3.6.1.4.1.866.20.1.30.10.1.1 |
fcvLvpVirtualPortIdThe value of this object identifies one and only
one local virtual port. Each local virtual port
corresponds, in fcvVirtualPortTable, to one
instance of fcvVpType equal to 'local'.
This is a decimal integer in the range 0 to 11.ro INTEGER .1.3.6.1.4.1.866.20.1.30.10.1.1.1 |
fcvLvpLogicalPortIdThe value of this object indicates the logical
port to which this local virtual port is
associated. This logical port must exist in
fclEthernetTable.
This is a decimal integer in the range 0 to 131.
The default value is '255' meaning 'empty value'
(blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.30.10.1.1.2 |
fcvLvpFiltering OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.30.10.10 |
fcvLvpFltConditionTableThis table defines the conditions which may be
used to make filters in fcvLvpFltFilterTable.
Set any writable object(s) of this table to valid
value(s) with a new index value to create an entry
(the objects of the entry not present in this SET
REQUEST will take their default values). Set
fcvLvpFltCondStatus to 'invalid' to delete an
entry. SEQUENCE OF FcvLvpFltConditionEntry .1.3.6.1.4.1.866.20.1.30.10.10.1 |
fcvLvpFltConditionEntryAn entry of fcvLvpFltConditionTable. FcvLvpFltConditionEntry .1.3.6.1.4.1.866.20.1.30.10.10.1.1 |
fcvLvpFltCondConditionIdThe value of this object identifies one and only
one condition. This condition identifier is used
in fcvFltFilterTable to make filters.
This is a decimal integer in the range 0 to 99.ro INTEGER .1.3.6.1.4.1.866.20.1.30.10.10.1.1.1 |
fcvLvpFltCondStatusThe value of this object indicates the state of
the entry of this table. It must be set to
'invalid' to delete the entry.
The default value is 'valid'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.10.10.1.1.2 |
fcvLvpFltCondOffsetThe value of this object selects the four bytes as
of which are applied the mask defined by
fcvLvpFltCondMask and the value defined by
fcvLvpFltCondValue.
Examples :
Offset at MAC level :
Destination MAC address (6 bytes): 0
Source MAC address (6 bytes) : 6
PID field (2 bytes) : 12
Offset at IP level with Ethernet
encapsulation :
Protocol (1 byte): 23
Source IP address (4 bytes): 26
Destination IP address (4 bytes): 30
This is a decimal integer in the range 0 to 1513.
The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.30.10.10.1.1.3 |
fcvLvpFltCondMaskThe value of this object defines the mask
indicating the bits of the four bytes selected by
fcvLvpFltCondOffset which are to be compared with
the bits of the four bytes defined by
fcvLvpFltCondValue.
This is a four-bytes octet string with 8 digits in
the range 0 to F,
The default value is 'FF FF FF FF'.rw OCTET STRING .1.3.6.1.4.1.866.20.1.30.10.10.1.1.4 |
fcvLvpFltCondValueThe value of this object defines the values of the
bits with which are compared, according to the
mask defined by fcvLvpFltCondMask, the bits of the
four bytes selected by fcvLvpFltCondOffset.
This is a four-bytes octet string with 8 digits in
the range 0 to F,
The default value is 'FF FF FF FF'.rw OCTET STRING .1.3.6.1.4.1.866.20.1.30.10.10.1.1.5 |
fcvLvpFltFilterTableThis table defines the filters which may be used
in the filtering table (fcvLvpFltFilteringTable).
One filter is a combination of up to three
conditions from fcvLvpFltConditionTable.
Set any writable object(s) of this table to valid
value(s) with a new index value to create an entry
(the objects of the entry not present in this SET
REQUEST will take their default values). Set
fcvLvpFltFilterStatus to 'invalid' to delete an
entry. SEQUENCE OF FcvLvpFltFilterEntry .1.3.6.1.4.1.866.20.1.30.10.10.2 |
fcvLvpFltFilterEntryAn entry of fcvLvpFltFilterTable. FcvLvpFltFilterEntry .1.3.6.1.4.1.866.20.1.30.10.10.2.1 |
fcvLvpFltFilterIdThe value of this object identifies one and only
one filter. This filter is a combination of one,
two or three conditions defined in
fcvLvpFltConditionTable. A filter selects the
received frames which simultaneously verify those
of the three conditions which are actually used
for this filter.
When several filters are simultaneously used on
the same virtual port, the equipment analyses them
in the incremental order of this filter identifier
until whether the current frame is selected by one
of these filters or all of them are analysed. So
the numbering order must be done with a particular
attention.
This is a decimal integer in the range 0 to 199.ro INTEGER .1.3.6.1.4.1.866.20.1.30.10.10.2.1.1 |
fcvLvpFltFilterStatusThe value of this object indicates the state of
the entry of this table. It must be set to
'invalid' to delete the entry.
The default value is 'valid'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.10.10.2.1.2 |
fcvLvpFltFilterCondition1IdThe value of this object specifies a first
condition used by this filter. This condition must
exist in fcvLvpFltConditionTable.
Important : by convention, the condition
identifier increased by 100 allows the opposite
condition to be applied : the received frames not
verifying this condition are then selected..
This is a decimal integer in the range 0 to 199.
The default value is '255' meaning 'empty value'
(blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.30.10.10.2.1.3 |
fcvLvpFltFilterCondition2IdThe value of this object specifies a second
condition used by this filter. This condition must
exist in fcvLvpFltConditionTable.
Important : by convention, the condition
identifier increased by 100 allows the opposite
condition to be applied : the received frames not
verifying this condition are then selected..
This is a decimal integer in the range 0 to 199.
The default value is '255' meaning 'empty value'
(blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.30.10.10.2.1.4 |
fcvLvpFltFilterCondition3IdThe value of this object specifies a third
condition used by this filter. This condition must
exist in fcvLvpFltConditionTable.
Important : by convention, the condition
identifier increased by 100 allows the opposite
condition to be applied : the received frames not
verifying this condition are then selected..
This is a decimal integer in the range 0 to 199.
The default value is '255' meaning 'empty value'
(blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.30.10.10.2.1.5 |
fcvLvpFltFilteringTableThis table is the filtering table. It defines
which filters are used by each virtual port to
select the frames to which is applied the
reject/accept decision. By default, if no filter
has been configured or if the frame is not
selected by any filter, it is accepted.
Set any writable object(s) of this table to valid
value(s) with a new index value to create an entry
(the objects of the entry not present in this SET
REQUEST will take their default values). Set
fcvLvpFltFilteringStatus to 'invalid' to delete an
entry. SEQUENCE OF FcvLvpFltFilteringEntry .1.3.6.1.4.1.866.20.1.30.10.10.3 |
fcvLvpFltFilteringEntryAn entry of fcvLvpFltFilteringTable. FcvLvpFltFilteringEntry .1.3.6.1.4.1.866.20.1.30.10.10.3.1 |
fcvLvpFltFilteringVirtualPortIdThe value of this object identifies one and only
one local virtual port. This local virtual port
must exist in fcvLocalVirtualPortTable.
Each local virtual port may use several filters :
the equipment analyses them in the incremental
order of the filter identifier until whether the
current frame is selected by one of these filters
or all of them are analysed.
This is a decimal integer in the range 0 to 11.ro INTEGER .1.3.6.1.4.1.866.20.1.30.10.10.3.1.1 |
fcvLvpFltFilteringFilterIdThe value of this object identifies one filter
used by this local virtual port. This filter must
exist in fcvFltFilterTable.
When several filters are simultaneously used on
the same virtual port, the equipment analyses them
in the incremental order of this filter
identifier. So the numbering order must be done
with a particular attention.
Important : , the value 200 designates a special
filter grouping all the frames received by this VP
which were not selected by the other filters
applied to this VP. This special filter is the
last analysed filter for this VP.
This filtering process concerns all the traffic
received on one of the IP, IPX or CNLP routers or
bridge whereas the filtering described in
fciFlowTable is made only at the IP level.
This is a decimal integer in the range 0 to 200.ro INTEGER .1.3.6.1.4.1.866.20.1.30.10.10.3.1.2 |
fcvLvpFltFilteringStatusThe value of this object indicates the state of
the entry of this table. It must be set to
'invalid' to delete the entry.
The default value is 'valid'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.10.10.3.1.3 |
fcvLvpFltFilteringTypeThe value of this object specifies whether the
frames selected by the filter are rejected or
accepted :
deny : the frames selected by the filter are
rejected, therefore the frames not
selected are accepted,
permit : the frames selected by the filter are
accepted, therefore the frames not
selected are rejected.
The default value is 'deny'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.10.10.3.1.4 |
fcvRemoteVirtualPorts OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.30.20 |
fcvRvpCompressionFor all the connections described in
fcvRvpConnectionTable, the value of this object
indicates the compression enabling for each
direction :
off : compression is disabled,
networkToSubscriber : compression is enabled
for the flow from the remote peer to the
equipment,
subscriberToNetwork : compression is enabled
for the flow from the equipment to the
remote peer,
bothway : compression is enabled for the two
flows from and to the equipment.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.20.1 |
fcvRvpCompressNegotiationThe value of this object indicates, when the
compression is active, whether the compression
facility is negociated or not and, if negociated,
the optional/mandatory status :
off : negociation is disabled,
onOptionalCompression : negociation is enabled
and compression is optional,
onMandatoryCompression : negociation is enabled
and compression is mandatory.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.20.2 |
fcvRvpCompressScramblingThe value of this object indicates, when the
compression is active, whether the scrambling is
enabled or not. @
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.20.3 |
fcvRvpCompressMultiPacketsTimerThe value of this object is the multi-packets
timer in milliseconds. When the compression is
active, the multi-packets function is specified in
order to reduce the number of single packets
(i.e., without 'More Data mark' = bit M set to 0)
transmitted to the remote peer by grouping several
packets in an only one compressed output packet.
The value 0 disables this function (i.e., each
single packet is individually compressed and
sent). So to enable this function this timer must
be different from 0 on both the local equipment
and the remote peer (even when the compression
direction is set to 'subscriberToNetwork' or
'subscriberToNetwork').
This timer starts when the equipment begins to
fill a new compressed output packet and it is
normally stopped when this packet is sent. When
this timer runs out the equipment sends this
compressed packet even if it is not full.
This is a decimal integer in the range 0 to 1500
by step of 100.
The default value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.30.20.4 |
fcvRvpReliableVirtualCircuitFor all the connections described in
fcvRvpConnectionTable, the value of this object
indicates whether the Reliable Virtual Circuit
(RVC) service is enabled or not :
off : no RVC, the VCs are considered as normal
VCs, no particular processing,
on : all calls transmitted by the subscriber
establish RVCs, it is also possible to
receive calls with RVC option.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.20.5 |
fcvRvpBeEntrant BErw INTEGER .1.3.6.1.4.1.866.20.1.30.20.6 |
fcvRvpConversionAimedPointConversion adresse : point viserw Enumeration .1.3.6.1.4.1.866.20.1.30.20.7 |
fcvRvpConversionIncomingCallConversion d'adresse sur appel entrantrw Enumeration .1.3.6.1.4.1.866.20.1.30.20.8 |
fcvRvpConversionOutgoingCallConversion adresse sur appel sortantrw Enumeration .1.3.6.1.4.1.866.20.1.30.20.9 |
fcvRvpConversionAddressCheckConversion adresse : controle de la presence dans
les tables de conversionrw Enumeration .1.3.6.1.4.1.866.20.1.30.20.10 |
fcvRvpConvMultiCalledAddrInCallNumero d'identification pour conversion d'adresse
d'appele multi-criteres en entreerw INTEGER .1.3.6.1.4.1.866.20.1.30.20.11 |
fcvRvpConvMultiCallingAddrInCallNumero d'identification pour conversion d'adresse
d'appelant multi-criteres en entreerw INTEGER .1.3.6.1.4.1.866.20.1.30.20.12 |
fcvRvpConvMultiCalledAddrOutCallNumero d'identification pour conversion d'adresse
d'appele multi-criteres en sortierw INTEGER .1.3.6.1.4.1.866.20.1.30.20.13 |
fcvRvpConvMultiCallingAddrOutCallNumero d'identification pour conversion d'adresse
d'appelant multi-criteres en sortierw INTEGER .1.3.6.1.4.1.866.20.1.30.20.14 |
fcvRvpCallAcceptwithReverseChargingAcceptation appel avec TADrw Enumeration .1.3.6.1.4.1.866.20.1.30.20.15 |
fcvRvpCosFor all the connections described in
fcvRvpConnectionTable, the value of this object
indicates the Class Of Service (COS) desired on a
Frame Relay network. This object is meaningless if
the call is established on another transport
network.
ubr : undefined bit rate,
vbr : variable bit rate.
The default value is 'ubr'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.20.20 |
fcvRvpCirFor all the connections described in
fcvRvpConnectionTable, the value of this object
indicates the Committed Infomation Rate (CIR) in
bits per second desired on a Frame Relay network.
This object is meaningless if the call is
established on another transport network.
The CIR is the subscriber data rate that the Frame
Relay network commits to deliver under normal
network conditions.
This is a decimal integer in the range 600 to
2048000. Only the following values are valid :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| # | value | # | value | # | value |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| 0 | 0 | 17 | 144000 | 33 | 1152000 |
| 2 | 600 | 18 | 192000 | 34 | 1216000 |
| 3 | 1200 | 19 | 256000 | 35 | 1280000 |
| 4 | 2400 | 20 | 320000 | 36 | 1344000 |
| 5 | 4800 | 21 | 384000 | 37 | 1408000 |
| 6 | 9600 | 22 | 448000 | 38 | 1472000 |
| 7 | 14400 | 23 | 512000 | 39 | 1536000 |
| 8 | 19200 | 24 | 576000 | 40 | 1600000 |
| 9 | 32000 | 25 | 640000 | 41 | 1664000 |
| 10 | 38400 | 26 | 704000 | 42 | 1728000 |
| 11 | 48000 | 27 | 768000 | 43 | 1792000 |
| 12 | 56000 | 28 | 832000 | 44 | 1856000 |
| 13 | 64000 | 29 | 896000 | 45 | 1920000 |
| 14 | 72000 | 30 | 960000 | 46 | 1984000 |
| 15 | 96000 | 31 | 1024000 | 47 | 2048000 |
| 16 | 128000 | 32 | 1088000 | | |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The default value is '4294967295' meaning 'empty
value' (blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.30.20.21 |
fcvRvpMinCirFor all the connections described in
fcvRvpConnectionTable, the value of this object
indicates the minimum Committed Infomation Rate
(CIR) in bits per second desired on a Frame Relay
network. This object is meaningless if the call is
established on another transport network.
This is a decimal integer in the range 600 to
2048000. Only the following values are valid :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| # | value | # | value | # | value |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| 0 | 0 | 17 | 144000 | 33 | 1152000 |
| 2 | 600 | 18 | 192000 | 34 | 1216000 |
| 3 | 1200 | 19 | 256000 | 35 | 1280000 |
| 4 | 2400 | 20 | 320000 | 36 | 1344000 |
| 5 | 4800 | 21 | 384000 | 37 | 1408000 |
| 6 | 9600 | 22 | 448000 | 38 | 1472000 |
| 7 | 14400 | 23 | 512000 | 39 | 1536000 |
| 8 | 19200 | 24 | 576000 | 40 | 1600000 |
| 9 | 32000 | 25 | 640000 | 41 | 1664000 |
| 10 | 38400 | 26 | 704000 | 42 | 1728000 |
| 11 | 48000 | 27 | 768000 | 43 | 1792000 |
| 12 | 56000 | 28 | 832000 | 44 | 1856000 |
| 13 | 64000 | 29 | 896000 | 45 | 1920000 |
| 14 | 72000 | 30 | 960000 | 46 | 1984000 |
| 15 | 96000 | 31 | 1024000 | 47 | 2048000 |
| 16 | 128000 | 32 | 1088000 | | |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The default value is '4294967295' meaning 'empty
value' (blank value on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.30.20.22 |
fcvRvpConnectionTableThis table defines the connections to each remote
bridge or router on WAN virtual networks. Each
connection is attached to one remote virtual port
of a module of the equipment.
Set any writable object(s) of this table to valid
value(s) with a new index value to create an entry
(the objects of the entry not present in this SET
REQUEST will take their default values). Set
fcvRvpConnStatus to 'invalid' to delete an entry. SEQUENCE OF FcvRvpConnectionEntry .1.3.6.1.4.1.866.20.1.30.20.23 |
fcvRvpConnectionEntryAn entry of fcvRvpConnectionTable. FcvRvpConnectionEntry .1.3.6.1.4.1.866.20.1.30.20.23.1 |
fcvRvpConnRemoteAddressThe value of this object is the X121 address of
the called remote bridge or router. This value is
the called address specified in the call packet
sent from this module.
Several connections using different encapsulations
may be established with the same remote equipment.
But when multiplexing is used it must be the only
encapsulation used with this particular remote
equipment.
This is a eight-bytes octet string with :
up to 15 digits in the range 0 to 9,
mandatory 'F' digits to pad the value until a
total of 16 digits (the equipment
configurator does not need this final
padding).ro OCTET STRING .1.3.6.1.4.1.866.20.1.30.20.23.1.1 |
fcvRvpConnEncapsulationThe value of this object indicates the protocol(s)
to be transferred on the connection :
multiplexing : all protocols may be transported
on this connection and it must be the only
encapsulation specified for this X121
address,
bridge : bridge protocol,
bridgeSpecific : bridge specific protocol,
ip : internet protocol,
ipx : internetwork packet exchange protocol,
ipxSpecific : specific internetwork packet
exchange protocol,
clnp : connectionless network protocol.ro Enumeration .1.3.6.1.4.1.866.20.1.30.20.23.1.2 |
fcvRvpConnConnectionIdWhen several connections are established with the
same encapsulation for the same remote equipment,
the value of this object identifies this
particular connection. This connection identifier
must also be configured on the remote equipment.
When only one connection is established with the
same encapsulation for the same remote equipment,
the value of this object is '255' (blank value on
the equipment configurator) meaning 'unused'.
This is a decimal integer in the range 1 to 8 or
equal to 255.ro INTEGER .1.3.6.1.4.1.866.20.1.30.20.23.1.3 |
fcvRvpConnStatusThe value of this object indicates the state of
the entry of this table. It must be set to
'invalid' to delete the entry.
The default value is 'valid'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.20.23.1.4 |
fcvRvpConnFlowTypeMaskThe value of this object is a mask specifying the
families (defined by fciFlowType) which have to
transit via this connection.
Example : let us suppose that fciFlowTable
defines the content of families 2, 8, 16,
32 and 64 and this connection is set up to
process families 8, 16 and 32. The mask
therefore takes on value : 8 + 16 + 32 =
56.
If two connections to the same address with the
same encapsulation select the same family, the
family will be oriented towards the first of these
connections (increasing order of the connection
identifiers).
By convention, the value 255 selects, out of all
the flows directed towards a WAN address, not only
all the specified flows (i.e., defined in
fciFlowTable) but also the unspecified flows
(i.e., not defined in fciFlowTable). This is the
default value to be used when flow separation is
not being used.
This is a decimal integer in the range 1 to 255.
The default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.30.20.23.1.5 |
fcvRvpConnModule0VpIdThe value of this object indicates the virtual
port used by the Bridge and Router functions of
the module 0 to communicate with the remote
equipment. This VP must exist in
fcvVirtualPortTable and must be a remote VP.
When this connection is not processed by the
module 0 this value is set to '255' (blank value
on the equipment configurator).
This is a decimal integer in the range 0 to 11.
The default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.30.20.23.1.10 |
fcvRvpConnModule1VpIdThe value of this object indicates the virtual
port used by the Bridge and Router functions of
the module 1 to communicate with the remote
equipment. This VP must exist in
fcvVirtualPortTable and must be a remote VP.
When this connection is not processed by the
module 1 this value is set to '255' (blank value
on the equipment configurator).
This is a decimal integer in the range 0 to 11.
The default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.30.20.23.1.11 |
fcvRvpConnModule2VpIdThe value of this object indicates the virtual
port used by the Bridge and Router functions of
the module 2 to communicate with the remote
equipment. This VP must exist in
fcvVirtualPortTable and must be a remote VP.
When this connection is not processed by the
module 2 this value is set to '255' (blank value
on the equipment configurator).
This is a decimal integer in the range 0 to 11.
The default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.30.20.23.1.12 |
fcvRvpConnCallDirectionThe value of this object defines the mode used to
establish this connection. The authorized values
are :
calling : the caller is this equipment (at
initialization time),
called : the caller is the remote this
equipment (at initialization time),
auto : automatic choise between 'calling' and
'called' (at initialization time with call
collision processing),
datagram : the caller is this equipment or the
remote one (at any time) depending on
which of them is the first one that wishes
send datas.
The default value is 'datagram'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.20.23.1.20 |
fcvRvpConnGroupingThe value of this object indicates whether the
frame grouping/separation service (according to a
specific proprietary encapsulation) is enabled or
not. It requires the configuration of the fast
select facility accross the WAN network.
The frame grouping option is compatible only with
the bridgeSpecific and ip encapsulations (see
fcvRvpConnEncapsulation).
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.30.20.23.1.21 |
fcvRvpConnMinimumRecallTimerThe value of this object is the minimum recall
timer in seconds. This timer starts when the
equipment initiates the call and it is normally
stopped when this call is successfull. When this
timer runs out the equipment initiates a new call.
This is a decimal integer in the range 0 to 990 by
step of 10.
The default value is '100'.rw INTEGER .1.3.6.1.4.1.866.20.1.30.20.23.1.22 |
fcvRvpConnInactivityTimerThe value of this object is the inactivity timer
in seconds. This timer starts one minute after the
call is successfull. When this timer runs out, if
there was traffic on this call during this period,
this timer is re-started otherwise this call is
cleared.
This is a decimal integer in the range 0 to 2540
by step of 10.
The default value is '30'.rw INTEGER .1.3.6.1.4.1.866.20.1.30.20.23.1.23 |
fcvRvpConnCirThe value of this object indicates, for this
connection, the Committed Infomation Rate (CIR) in
bits per second desired on a Frame Relay network.
This object is meaningless if the call is
established on another transport network.
The CIR is the subscriber data rate that the Frame
Relay network commits to deliver under normal
network conditions.
This is a decimal integer in the range 600 to
2048000. Only the following values are valid :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| # | value | # | value | # | value |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| 0 | 0 | 17 | 144000 | 33 | 1152000 |
| 2 | 600 | 18 | 192000 | 34 | 1216000 |
| 3 | 1200 | 19 | 256000 | 35 | 1280000 |
| 4 | 2400 | 20 | 320000 | 36 | 1344000 |
| 5 | 4800 | 21 | 384000 | 37 | 1408000 |
| 6 | 9600 | 22 | 448000 | 38 | 1472000 |
| 7 | 14400 | 23 | 512000 | 39 | 1536000 |
| 8 | 19200 | 24 | 576000 | 40 | 1600000 |
| 9 | 32000 | 25 | 640000 | 41 | 1664000 |
| 10 | 38400 | 26 | 704000 | 42 | 1728000 |
| 11 | 48000 | 27 | 768000 | 43 | 1792000 |
| 12 | 56000 | 28 | 832000 | 44 | 1856000 |
| 13 | 64000 | 29 | 896000 | 45 | 1920000 |
| 14 | 72000 | 30 | 960000 | 46 | 1984000 |
| 15 | 96000 | 31 | 1024000 | 47 | 2048000 |
| 16 | 128000 | 32 | 1088000 | | |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The default value is '4294967295' meaning 'empty
value' (blank value on the equipment
configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.30.20.23.1.24 |
fcvRvpConnCosRequested Class of Service for this connection,
the Cos can be configured more globally.rw Enumeration .1.3.6.1.4.1.866.20.1.30.20.23.1.25 |
fcvRvpConnBeBerw INTEGER .1.3.6.1.4.1.866.20.1.30.20.23.1.26 |
fcSna OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.32 |
fcsnaLocalVirtualPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.32.1 |
fcsnaLvpLocalLanPuTable SEQUENCE OF FcsnaLvpLocalLanPuEntry .1.3.6.1.4.1.866.20.1.32.1.1 |
fcsnaLvpLocalLanPuEntryAn entry of fcsnaLvpLocalLanPuTable. FcsnaLvpLocalLanPuEntry .1.3.6.1.4.1.866.20.1.32.1.1.1 |
fcsnaLvpLlpVirtualPortIdVP idro INTEGER .1.3.6.1.4.1.866.20.1.32.1.1.1.1 |
fcsnaLvpLlpPuIdPhysical Unit idro INTEGER .1.3.6.1.4.1.866.20.1.32.1.1.1.2 |
fcsnaLvpLlpStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.32.1.1.1.3 |
fcsnaLvpParameters OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.32.1.10 |
fcsnaLvpParamLinkTypeThe type of frontal must be connected to a primary
link-station or negociable link station that will
become the primary. The type of remote must be
connected to a secondary link-station or
negociable link station that will become the
secondary.
The default value is 'frontal'rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.10.1 |
fcsnaLvpParamFrameFormatThe unit supports IEEE 802.3 and V2 DIX Ethernet
frame format.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.10.2 |
fcsnaLvpParamLocalTestThis feature is used in 'frontal' mode. If this
feature is set to on, and when the internal
connection is established, it will send a local
test frame to the primary link-station.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.10.3 |
fcsnaLvpParamCallDirectionFrontal mode is called. Remote mode is calling.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.10.4 |
fcsnaLvpMacAddressTransMAC address translation.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.10.5 |
fcsnaLvpParamT1T1 Reply timer. A link-station uses T1 to detect a
failure to receive a required acknowlegment or
response. T1 runs when there are acknowlegments
outstanding, it is reset when acknowlegments are
received.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.10.10 |
fcsnaLvpParamN2The maximum number of transmissions. If the reply
timer expires for whatever reason, an S-frame with
poll bit set is sent to sollicit a response from
remote link-station. If there is still no response
after N2 retry, the link is deemed to be
inoperative.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.10.11 |
fcsnaLvpParamT2Receiver acknowledge timer. The end station uses
this timer to delay the seding of an acknowlegment
for a received I-frame LPDU. The link-station
starts T2 when it receives an I-frame and resets
it when it sends an acknowlegment. T2 must be less
than T1.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.10.12 |
fcsnaLvpParamN3Number of I-frame LPDU's received before sending
an acknowledgment.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.10.13 |
fcsnaLvpParamNWNumber of acknowledgments needed to increment Ww.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.10.14 |
fcsnaLvpParamTWLLC transmit window size. This is maximum number
of sequentially numbered Iframe that the
link-station may have outstanding at any given
time.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.10.15 |
fcsnaLvpParamRWLLC receive window size. This is the maximum
number of unacknowlegment sequentially numbered
I-frame the link-station can receive from the
remote station.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.10.16 |
fcsnaLvpParamMinRecallTimerSlow call timer.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.10.20 |
fcsnaLvpParamSubscriberNumberThe value of this object is the SB number added to
the DNICZO of the equipment to make the calling
address in a call sent from this logical port. The
value must contain 2 digits (digits 0..9). The
default value is '22'.rw OCTET STRING .1.3.6.1.4.1.866.20.1.32.1.10.21 |
fcsnaLvpParamReliableVcThe value of this object is used to enable the
Reliable Virtual Circuit service. The authorized
values are :
off : no RVC, the VCs are considered as normal
VCs, no particular processing,
clear : RVCs are not allowed for the
subscriber, each attempt to establish a
RVC provokes a clear of the connection,
subscribe : all calls transmitted by the
subscriber establish RVCs, it is also
possible to receive calls with RVC option,
check :
for a link to a subscriber : when a call with
RVC option is received, a RVC is
established
for a link to a network : the RVC option is
ignored when it is present in a call sent
by a local subscriber, the connection is
cleared when the RVC option is present in
a call sent by the network.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.10.22 |
fcsnaLvpParamCompressionThe value of this object indicates the compression
enabling for each direction. The authorized values
are :
off : no compression,
networkToSubscriber : compression of the flow
from the remote peer to the equipment,
subscriberToNetwork : compression of the flow
from the equipment to the remote peer,
bothway : compression of the two flows from and
to the equipment.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.10.30 |
fcsnaLvpParamCompressNegotiationThe value of this object indicates whether the
compression facility is negociated or not and, if
negociated, the optional/obligatory status. The
authorized values are :
off' :no negociation,
onOptionalCompression : negociation but
compression is optional,
onMandatoryCompression : negociation and
compression is mandatory.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.10.31 |
fcsnaLvpParamCompressScramblingThe value of this object indicates, when the
compression is active, whether the scrambling is
enabled or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.10.32 |
fcsnaLvpParamCompressMultiPacketsTimerThe value of this object defines the maximum
waiting time, in milliseconds by steps of 100
milliseconds , which, if there is not another
packet to compress, the packet of compressed
packets is sent beyond (this permits to reduce the
number of packets transmitted to the remote peer).
The authorized values are '0..1500'. '0' means no
packets grouping (i. e. : each packet is
individually compressed and sent). The default
value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.10.33 |
fcsnaLvpParamCosClass Of Service VBR or UBR.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.10.40 |
fcsnaLvpParamCirCommitted information Rate is the maximum number
of bits per seconds which an end station can
transmit into the network . This is the access
rate of the user-network interface and it is
limited by the line speed of the user-network
connection and established by subscription.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.10.41 |
fcsnaLvpParamCirMinIf the end station is informed about the
congestion of the network, this is the minimum CIR
that the end station can transmit into the network.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.10.42 |
fcsnaLvpParamBcThe Committed Burst Size is a measure for the
volume of data for which the network will garantee
message delivery under normal conditions. It is
measured during the committed rate measurement
interval (Tc).rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.10.43 |
fcsnaLvpParamBeThe Excess Burst Size is the maximum amount of
uncommitted data in access of Bc that the network
will attemp to deliver during a time interval
(Tc). End stations are allowed to transmit data in
excess of the committed burst rate.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.10.44 |
fcsnaLvpTrParameters OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.32.1.20 |
fcsnaLvpTrParamLinkTypefrontal must be connected to the a primary
link-station or negociable link-station that will
become the primary, remote must be connected to
the a decondary link-station or negociable
link-station that will become the secondaryrw Enumeration .1.3.6.1.4.1.866.20.1.32.1.20.1 |
fcsnaLvpTrParamBroadcastTypeThis field defines the type of broadcast test
frame. The unit sends to a destination to
determine the best routerw Enumeration .1.3.6.1.4.1.866.20.1.32.1.20.2 |
fcsnaLvpTrParamLocalTestThis feature is used in 'frontal' mode. If this
feature is set to on, and when the internal
connection is established, it will send a local
test frame to the primary link-station.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.20.3 |
fcsnaLvpTrParamCallDirectionFrontal mode is called. Remote mode is calling.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.20.4 |
fcsnaLvpTrRingNoThis field identifies the ring number of the LAN
to which the unit connects.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.5 |
fcsnaLvpTrBridgeNoA unit attached to a Token Ring LAN represents a
bridge between the physical LAN ring and the
network's virtual ring.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.6 |
fcsnaLvpTrMacAddressTransMAC address translationrw Enumeration .1.3.6.1.4.1.866.20.1.32.1.20.7 |
fcsnaLvpTrParamT1T1 Reply timer. A link-station uses T1 to detect a
failure to receive a required acknowlegment or
response. T1 runs when there are acknowlegments
outstanding, it is reset when acknowlegments are
received.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.10 |
fcsnaLvpTrParamN2The maximum number of transmissions. If the reply
timer expires for whatever reason, an S-frame with
poll bit set is sent to sollicit a response from
remote link-station. If there is still no response
after N2 retry, the link is deemed to be
inoperative.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.11 |
fcsnaLvpTrParamT2Receiver acknowledge timer. The end station uses
this timer to delay the seding of an acknowlegment
for a received I-frame LPDU. The link-station
starts T2 when it receives an I-frame and resets
it when it sends an acknowlegment. T2 must be less
than T1.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.12 |
fcsnaLvpTrParamN3Number of I-frame LPDU's received before sending
an acknowledgmentrw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.13 |
fcsnaLvpTrParamNWNumber of acknowledgments needed to increment Wwrw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.14 |
fcsnaLvpTrParamTWLLC transmit window size. This is maximum number
of sequentially numbered Iframe that the
link-station may have outstanding at any given
time.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.15 |
fcsnaLvpTrParamRWLLC receive window size. This is the maximum
number of unacknowlegment sequentially numbered
I-frame the link-station can receive from the
remote station.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.16 |
fcsnaLvpTrParamMinRecallTimerSlow call timer.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.20 |
fcsnaLvpTrParamSubscriberNumberThe value of this object is the SB number added to
the DNICZO of the equipment to make the calling
address in a call sent from this logical port. The
value must contain 2 digits (digits 0..9). The
default value is '22'.rw OCTET STRING .1.3.6.1.4.1.866.20.1.32.1.20.21 |
fcsnaLvpTrParamReliableVcThe value of this object is used to enable the
Reliable Virtual Circuit service. The authorized
values are :
off : no RVC, the VCs are considered as normal
VCs, no particular processing,
clear : RVCs are not allowed for the
subscriber, each attempt to establish a
RVC provokes a clear of the connection,
subscribe : all calls transmitted by the
subscriber establish RVCs, it is also
possible to receive calls with RVC option,
check :
for a link to a subscriber : when a call with
RVC option is received, a RVC is
established
for a link to a network : the RVC option is
ignored when it is present in a call sent
by a local subscriber, the connection is
cleared when the RVC option is present in
a call sent by the network.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.20.22 |
fcsnaLvpTrParamCompressionThe value of this object indicates the compression
enabling for each direction. The authorized values
are :
off : no compression,
networkToSubscriber : compression of the flow
from the remote peer to the equipment,
subscriberToNetwork : compression of the flow
from the equipment to the remote peer,
bothway : compression of the two flows from and
to the equipment.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.20.30 |
fcsnaLvpTrParamCompressNegotiationThe value of this object indicates whether the
compression facility is negociated or not and, if
negociated, the optional/obligatory status. The
authorized values are :
off' :no negociation,
onOptionalCompression : negociation but
compression is optional,
onMandatoryCompression : negociation and
compression is mandatory.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.20.31 |
fcsnaLvpTrParamCompressScramblingThe value of this object indicates, when the
compression is active, whether the scrambling is
enabled or not. The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.20.32 |
fcsnaLvpTrParamCompressMultiPacketsTimerThe value of this object defines the maximum
waiting time, in milliseconds by steps of 100
milliseconds , which, if there is not another
packet to compress, the packet of compressed
packets is sent beyond (this permits to reduce the
number of packets transmitted to the remote peer).
The authorized values are '0..1500'. '0' means no
packets grouping (i. e. : each packet is
individually compressed and sent). The default
value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.33 |
fcsnaLvpTrParamCosClass Of Service VBR or UBR.rw Enumeration .1.3.6.1.4.1.866.20.1.32.1.20.40 |
fcsnaLvpTrParamCirCommitted information Rate is the maximum number
of bits per seconds which an end station can
transmit into the network . This is the access
rate of the user-network interface and it is
limited by the line speed of the user-network
connection and established by subscription.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.41 |
fcsnaLvpTrParamCirMinIf the end station is informed about the
congestion of the network, this is the minimum CIR
that the end station can transmit into the
network.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.42 |
fcsnaLvpTrParamBcThe Committed Burst Size is a measure for the
volume of data for which the network will garantee
message delivery under normal conditions. It is
measured during the committed rate measurement
interval (Tc).rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.43 |
fcsnaLvpTrParamBeThe Excess Burst Size is the maximum amount of
uncommitted data in access of Bc that the network
will attemp to deliver during a time interval
(Tc). End stations are allowed to transmit data in
excess of the committed burst rate.rw INTEGER .1.3.6.1.4.1.866.20.1.32.1.20.44 |
fcsnaGeneralParameters OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.32.5 |
fcsnaGpRoutingTable SEQUENCE OF FcsnaGpRoutingEntry .1.3.6.1.4.1.866.20.1.32.5.1 |
fcsnaGpRoutingEntryAn entry of fcsnaGpRoutingTable. FcsnaGpRoutingEntry .1.3.6.1.4.1.866.20.1.32.5.1.1 |
fcsnaGpRoutClusterPuIdPU id clusterro INTEGER .1.3.6.1.4.1.866.20.1.32.5.1.1.1 |
fcsnaGpRoutHostPuIdPU id hostro INTEGER .1.3.6.1.4.1.866.20.1.32.5.1.1.2 |
fcsnaGpRoutStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.32.5.1.1.3 |
fcsnaGpRoutDsapDSAP This field defines the service access point
for the PU session. The unit uses this
Address in conjunction withe the MAC address to to
map the session to its destination.
If the PU originates the call, this is the source
SSAP. If the PU responds the call, this is
The destionation DSAP.rw OCTET STRING .1.3.6.1.4.1.866.20.1.32.5.1.1.10 |
fcsnaGpRoutSsapSSAP This field defines the service access point
for the PU session. The unit uses this
Address in conjunction withe the MAC address to to
map the session to its destination.
If the PU originates the call, this is the source
SSAP. If the PU responds the call, this is
The destionation DSAP.rw OCTET STRING .1.3.6.1.4.1.866.20.1.32.5.1.1.11 |
fcsnaGpRoutCosCOS Class Of Service VBR or UBRrw Enumeration .1.3.6.1.4.1.866.20.1.32.5.1.1.20 |
fcsnaGpRoutCirCIR Committed information Rate is the maximum
number of bits per seconds which an end station
can transmit into the network . This is the access
rate of the user-network interface and it is
limited by the line speed of the user-network
connection and established by subscription.rw INTEGER .1.3.6.1.4.1.866.20.1.32.5.1.1.21 |
fcsnaGpRoutCirminCIRmin If the end station is informed about the
congestion of the network, this is the minimum CIR
that the end station can transmit into the network.rw INTEGER .1.3.6.1.4.1.866.20.1.32.5.1.1.22 |
fcsnaGpRoutBcBc The Committed Burst Size is a measure for the
volume of data for which the network will garantee
message delivery under normal conditions. It is
measured during the committed rate measurement
interval (Tc)rw INTEGER .1.3.6.1.4.1.866.20.1.32.5.1.1.23 |
fcsnaGpRoutBeBe The Excess Burst Size is the maximum amount of
uncommitted data in access of Bc that the network
will attemp to deliver during a time interval
(Tc). End stations are allowed to transmit data in
excess of the committed burst rate.rw INTEGER .1.3.6.1.4.1.866.20.1.32.5.1.1.24 |
fcsnaGpRemotePuTable SEQUENCE OF FcsnaGpRemotePuEntry .1.3.6.1.4.1.866.20.1.32.5.2 |
fcsnaGpRemotePuEntryAn entry of fcsnaGpRemotePuTable. FcsnaGpRemotePuEntry .1.3.6.1.4.1.866.20.1.32.5.2.1 |
fcsnaGpRemPuPuIdPhysical Unit idro INTEGER .1.3.6.1.4.1.866.20.1.32.5.2.1.1 |
fcsnaGpRemPuStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.32.5.2.1.2 |
fcsnaGpRemPuProtocolType de protocole The value of this object allows
to interworking with an remote
Equipement which uses another communication
protocole as X25/QLLC, SDLC or
Lan protocol SNA/LLC2.rw Enumeration .1.3.6.1.4.1.866.20.1.32.5.2.1.3 |
fcsnaGpSdlcTable SEQUENCE OF FcsnaGpSdlcEntry .1.3.6.1.4.1.866.20.1.32.5.3 |
fcsnaGpSdlcEntryAn entry of fcsnaGpSdlcTable. FcsnaGpSdlcEntry .1.3.6.1.4.1.866.20.1.32.5.3.1 |
fcsnaGpSdlcPuIdPhysical Unit idro INTEGER .1.3.6.1.4.1.866.20.1.32.5.3.1.1 |
fcsnaGpSdlcStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.32.5.3.1.2 |
fcsnaGpSdlcLpLogical Port The value of this object identifies
one and only one SDLC logical port. The possible
values are : '0..131'. If it is unused, the value
of this parameter is '255'. The default value is
'255'.rw INTEGER .1.3.6.1.4.1.866.20.1.32.5.3.1.3 |
fcsnaGpSdlcClusterCluster This is the address of the PU of the
controller.rw OCTET STRING .1.3.6.1.4.1.866.20.1.32.5.3.1.4 |
fcsnaGpX25Table SEQUENCE OF FcsnaGpX25Entry .1.3.6.1.4.1.866.20.1.32.5.4 |
fcsnaGpX25EntryAn entry of fcsnaGpX25Table. FcsnaGpX25Entry .1.3.6.1.4.1.866.20.1.32.5.4.1 |
fcsnaGpX25PuIdPhysical Unit idro INTEGER .1.3.6.1.4.1.866.20.1.32.5.4.1.1 |
fcsnaGpX25StatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.32.5.4.1.2 |
fcsnaGpX25AddressAdresse X121 Called X121 address. X121 Address of
the corresponding Hpad elementrw OCTET STRING .1.3.6.1.4.1.866.20.1.32.5.4.1.3 |
fcsnaGpLanFrTable SEQUENCE OF FcsnaGpLanFrEntry .1.3.6.1.4.1.866.20.1.32.5.5 |
fcsnaGpLanFrEntryAn entry of fcsnaGpLanFrTable. FcsnaGpLanFrEntry .1.3.6.1.4.1.866.20.1.32.5.5.1 |
fcsnaGpLanFrPuIdPhysical Unit idro INTEGER .1.3.6.1.4.1.866.20.1.32.5.5.1.1 |
fcsnaGpLanFrStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.32.5.5.1.2 |
fcsnaGpLanFrMacAddressAdresse MAC This parameter defines the PU MAC
address.rw OCTET STRING .1.3.6.1.4.1.866.20.1.32.5.5.1.3 |
fcsnaGpMiscellaneousParameters OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.32.5.10 |
fcsnaGpMiscMacAddrLearningModeThe value of this object indicates whether
automatic MAc address learning is enabled or not.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.32.5.10.1 |
fcBridge OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.35 |
fcbBridgingThe value of this object indicates whether the
bridge forwards data or not, and if it does
whether the Spanning Tree Protocol (STP) is
enabled or not.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.35.1 |
fcbBridgingBetweenRemoteVpThe value of this object indicates whether the
bridge forwards data between remote virtual ports
or not. Disabling this possibility prevents from
making a way between remote equipments on
different virtual networks which should not
exchange data.
BRIDGING BETWEEN REMOTE VP IS NOT IMPLEMENTED IN
THIS SOFTWARE VERSION.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.35.2 |
fcbTransparentBridge OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.35.10 |
fcbBrdgVirtualPortTableThis table defines the virtual ports used by the
bridge.
Set any writable object(s) of this table to valid
value(s) with a new index value to create an entry
(the objects of the entry not present in this SET
REQUEST will take their default values). Set
fcbBrdgVpStatus to 'invalid' to delete an entry. SEQUENCE OF FcbBrdgVirtualPortEntry .1.3.6.1.4.1.866.20.1.35.10.1 |
fcbBrdgVirtualPortEntryAn entry of fcbBrdgVirtualPortTable. FcbBrdgVirtualPortEntry .1.3.6.1.4.1.866.20.1.35.10.1.1 |
fcbBrdgVpVirtualPortIdThe value of this object identifies one and only
one virtual port. This virtual port must exist in
fcvVirtualPortTable.
This is a decimal integer in the range 0 to 11.ro INTEGER .1.3.6.1.4.1.866.20.1.35.10.1.1.1 |
fcbBrdgVpStatusThe value of this object indicates the state of
the entry of this table. It must be set to
'invalid' to delete the entry.
The default value is 'valid'.rw Enumeration .1.3.6.1.4.1.866.20.1.35.10.1.1.2 |
fcbBrdgVpAgingTimeThe value of this object is the aging time in
seconds for addresses learnt on this virtual port.
This is a decimal integer in the range 0 to 3600.
The default value is '300'.rw INTEGER .1.3.6.1.4.1.866.20.1.35.10.1.1.4 |
fcbBrdgVpBroadcastingThe value of this object indicates whether
broadcasting is enabled or not for this virtual
port. This function may permit to limit the use of
expansive WAN links.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.35.10.1.1.5 |
fcbBrdgVpFcsPreservationThe value of this object indicates whether the FCS
(Frame Check Sequence) of MAC frames is
transported over the WAN network or not through
this virtual port. This value is meaningless for
local virtual ports.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.35.10.1.1.6 |
fcbBrdgRemoteAddressMappingTableThis table contains the static entries of the
address translation table. The transparent Bridge
function learns dynamically the entries of the
address translation table. Owing to speed
considerations or the possibility of learning, it
may be necessary to create static entries in this
table.
Set any writable object(s) of this table to valid
value(s) with a new index value to create an entry
(the objects of the entry not present in this SET
REQUEST will take their default values). Set
fcbBrdgMapStatus to 'invalid' to delete an entry. SEQUENCE OF FcbBrdgRemoteAddressMappingEntry .1.3.6.1.4.1.866.20.1.35.10.2 |
fcbBrdgRemoteAddressMappingEntryAn entry of fcbBrdgRemoteAddressMappingTable. FcbBrdgRemoteAddressMappingEntry .1.3.6.1.4.1.866.20.1.35.10.2.1 |
fcbBrdgMapMacAddressThe value of this object is the MAC address of a
remote station to be reached through WAN networks.
This is a six-bytes octet string with 12 digits in
the range 0 to F. Broadcasting (FF FF FF FF FF
FF), null (00 00 00 00 00 00) and group (bit 0 of
first byte equal to 1) addresses must not be used.ro OCTET STRING .1.3.6.1.4.1.866.20.1.35.10.2.1.1 |
fcbBrdgMapStatusThe value of this object indicates the state of
the entry of this table. It must be set to
'invalid' to delete the entry.
The default value is 'valid'.rw Enumeration .1.3.6.1.4.1.866.20.1.35.10.2.1.2 |
fcbBrdgMapRemoteAddressThe value of this object is the X121 address of a
remote bridge able to reach this remote station.
This address must exist in fcvRvpConnectionTable.
This is a eight-bytes octet string with :
up to 15 digits in the range 0 to 9,
mandatory 'F' digits to pad the value until a
total of 16 digits (the equipment
configurator does not need this final
padding).
The default value is 'FF FF FF FF FF FF FF FF'
meaning 'empty value' (blank value on the
equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.35.10.2.1.3 |
fcbSpanningTreeProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.35.20 |
fcbStpPriorityThe value of this object is the Bridge Priority
used in association with the MAC address of the
Ethernet port by the STP algorithm so as to
determine from among all the possibilities, the
bridge that will be elected as topology root. The
lower the value, the higher the bridge priority..
This is a decimal integer in the range 0 to 65535.
The default value is '32768'.rw INTEGER .1.3.6.1.4.1.866.20.1.35.20.1 |
fcbStpMaxAgeThe value of this object is the maximum age, in
milliseconds, of STP information learned from the
network on any virtual port before it is
discarded. This value is used by all bridges when
this bridge is acting as the root of the spanning
tree.
This maximum age is the life duration assigned to
a Configuration bridge PDU issued at the
initiative of the bridge. This life duration will
be decremented by the various bridges crossed and
will reach zero, causing the deletion of the
Configuration bridge PDU.
This is a decimal integer in the range 600 to
4000.
The default value is '2000'.rw INTEGER .1.3.6.1.4.1.866.20.1.35.20.2 |
fcbStpHelloTimeThe value of this object is the hello time, in
milliseconds. This is the amount of time between
the transmissions of Configuration bridge PDUs by
this node on any virtual port when it is the root
of the spanning tree or trying to become so. This
value is used by all bridges when this bridge is
acting as the root.
This is a decimal integer in the range 100 to
1000.
The default value is '200'.rw INTEGER .1.3.6.1.4.1.866.20.1.35.20.3 |
fcbStpForwardDelayThe value of this object is the forward delay, in
milliseconds. This time value controls how fast a
virtual port changes its spanning state when
moving towards the Forwarding state. The value
determines how long the port stays in each of the
Listening and Learning states, which precede the
Forwarding state. This value is also used, when a
topology change has been detected and is underway,
to age all dynamic entries in the Forwarding
Database. This value is the value that this bridge
and all others would start using if/when this
bridge were to become the root.
The Forward Delay value corresponds to the time
during which the bridge that has just been started
does not provide its service; it waits until the
STP has established its topology. During this
period, only the Configuration bridge PDUs are
bridged, the user frames are not processed and
this time delay is also used as minimum duration
of a bridge state.
This is a decimal integer in the range 400 to
3000.
The default value is '1500'.rw INTEGER .1.3.6.1.4.1.866.20.1.35.20.4 |
fcbStpVirtualPortTableThis table defines the Spanning Tree Protocol
parameters of virtual ports.
It is not possible to add or delete an entry of
this table (each entry corresponds, in
fcbBrdgVirtualPortTable, to one instance of
fcbBrdgVpVirtualPortId). SEQUENCE OF FcbStpVirtualPortEntry .1.3.6.1.4.1.866.20.1.35.20.10 |
fcbStpVirtualPortEntryAn entry of fcbStpVirtualPortTable. FcbStpVirtualPortEntry .1.3.6.1.4.1.866.20.1.35.20.10.1 |
fcbStpVpVirtualPortIdThe value of this object identifies one and only
one virtual port. Each virtual port corresponds,
in fcbBrdgVirtualPortTable, to one instance of
fcbBrdgVpVirtualPortId.
This is a decimal integer in the range 0 to 11.ro INTEGER .1.3.6.1.4.1.866.20.1.35.20.10.1.1 |
fcbStpVpPortPriorityThe value of this object is the priority field
which is contained in the first (in network byte
order) octet of the (2 octet long) Port ID. The
other octet of the Port ID is given by the value
of fcbStpVpVirtualPortId.
The port priority is used with its extra cost and
its MAC address for the STP algorithm in order to
grade the ports of the bridge in order of
preference. This concept is used by the STP
algorithm to elect the root port and to detect a
loop so as to determine the port to be cut off.
This is a decimal integer in the range 0 to 255.
The default value is '128'.rw INTEGER .1.3.6.1.4.1.866.20.1.35.20.10.1.2 |
fcbStpVpPortPathCostThe value of this object is the contribution of
this port to the path cost of paths towards the
spanning tree root which include this port.
802.1D-1990 recommends that the default value of
this parameter be in inverse proportion to the
speed of the attached virtual network.
The path cost of the port is used jointly with its
priority and its MAC address by the STP algorithm
in order to classify the bridge ports in order of
preference. Thge lower the cost, the better
preferred is the port. This concept is used by the
STP algorithm on initialization to elect the root
port and when a loop is detected in order to
determine which port is to be cut off.
This is a decimal integer in the range 1 to 65535.
The default value is '100'.rw INTEGER .1.3.6.1.4.1.866.20.1.35.20.10.1.3 |
fcbStpVpBpduEncapsulationThe value of this object indicates, for the remote
virtual ports, how the STP frames are encapsulated
on the WAN virtual network. This value is
meaningless for local virtual ports :
mac : STP frames are encapsulated in SNAP
802.3,
bpdu : STP frames are encapsulated in SNAP
BPDU.
The default value is 'mac'.rw Enumeration .1.3.6.1.4.1.866.20.1.35.20.10.1.4 |
fcIpRouter OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.36 |
fciIpRoutingThe value of this object indicates whether the
equipment is acting as an IP gateway in respect to
the forwarding of IP datagrams received by, but
not addressed to, this entity. IP gateways forward
IP datagrams. IP hosts do not.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.1 |
fciFastIpRoutingThe value of this object indicates whether the
optimized forwarding of IP datagrams is enabled or
not. This optimization consist in reducing the
validity checks carried out on each IP datagram.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.2 |
fciIcmpRedirectionThe value of this object indicates whether the
ICMP (Internet Control Message Protocol) Redirect
messages are sent or not.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.3 |
fciSourceRoutingThe value of this object indicates whether the
Source Routing information is inserted in the
forwarded IP datagrams or not.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.4 |
fciVirtualPortTableThis table defines the virtual ports used by the
IP router.
Set any writable object(s) of this table to valid
value(s) with a new index value to create an entry
(the objects of the entry not present in this SET
REQUEST will take their default values). Set
fciVpStatus to 'invalid' to delete an entry. SEQUENCE OF FciVirtualPortEntry .1.3.6.1.4.1.866.20.1.36.10 |
fciVirtualPortEntryAn entry of fciVirtualPortTable. FciVirtualPortEntry .1.3.6.1.4.1.866.20.1.36.10.1 |
fciVpVirtualPortIdThe value of this object identifies one and only
one virtual port. This virtual port must exist in
fcvVirtualPortTable.
This is a decimal integer in the range 0 to 11.ro INTEGER .1.3.6.1.4.1.866.20.1.36.10.1.1 |
fciVpStatusThe value of this object indicates the state of
the entry of this table. It must be set to
'invalid' to delete the entry.
The default value is 'valid'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.10.1.2 |
fciVpIpAddressThe value of this object is the IP address
associated with this virtual port. This IP address
must be a valid host address.
The default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.866.20.1.36.10.1.3 |
fciVpNetMaskThe value of this object is the subnet mask
associated with the IP address of this virtual
port. The value of the mask is an IP address with
all the network bits set to 1 and all the hosts
bits set to 0. In the absence of subnets, the mask
contains 255.0.0.0 for an address of class A,
255.255.0.0 for class B, 255.255.255.0 for class
C.
The default value is '255.255.255.0'.rw IpAddress .1.3.6.1.4.1.866.20.1.36.10.1.4 |
fciVpMtuThe value of this object defines, in octets, the
largest IP datagram (Maximum Transmit Unit) which
can be sent/received on this virtual port.
This is a decimal integer in the range 576 to
9180.
The default value is '1500'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.10.1.5 |
fciVpProxyArpThe value of this object indicates whether the
proxy-ARP processing is enabled or not.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.10.1.6 |
fciVpInverseArpFor all connections without IP address association
on an IP VP, this parameter activate an InverseARP
resolution.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.10.1.7 |
fciLocalVirtualPortTableThis table defines the local virtual ports used by
the IP router.
Set any writable object(s) of this table to valid
value(s) with a new index value to create an entry
(the objects of the entry not present in this SET
REQUEST will take their default values). Set
fciLvpStatus to 'invalid' to delete an entry. SEQUENCE OF FciLocalVirtualPortEntry .1.3.6.1.4.1.866.20.1.36.11 |
fciLocalVirtualPortEntryAn entry of fciLocalVirtualPortTable. FciLocalVirtualPortEntry .1.3.6.1.4.1.866.20.1.36.11.1 |
fciLvpVirtualPortIdThe value of this object identifies one and only
one local virtual port. This local virtual port
must exist in fciVirtualPortTable and in
fcvLocalVirtualPortTable.
This is a decimal integer in the range 0 to 11.ro INTEGER .1.3.6.1.4.1.866.20.1.36.11.1.1 |
fciLvpStatusThe value of this object indicates the state of
the entry of this table. It must be set to
'invalid' to delete the entry.
The default value is 'valid'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.11.1.2 |
fciLvpEncapsulationThe value of this object indicates, for this local
virtual ports, how the IP datagrams are
encapsulated on the LAN virtual network :
ethernet : IP datagrams are encapsulated
according to Ethernet V2 standard,
ieee802-3 : IP datagrams are encapsulated
according to IEEE 802.3 standard.
The default value is 'ethernet'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.11.1.3 |
fciLocalClusterTable SEQUENCE OF FciLocalClusterEntry .1.3.6.1.4.1.866.20.1.36.12 |
fciLocalClusterEntryAn entry of fciLocalClusterTable. FciLocalClusterEntry .1.3.6.1.4.1.866.20.1.36.12.1 |
fciLclVirtualPortIdVP idro INTEGER .1.3.6.1.4.1.866.20.1.36.12.1.1 |
fciLclClusterNumberCluster numberro INTEGER .1.3.6.1.4.1.866.20.1.36.12.1.2 |
fciLclStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.36.12.1.3 |
fciLclVirtualIpAddressVirtual IP Addressrw IpAddress .1.3.6.1.4.1.866.20.1.36.12.1.4 |
fciLclPriorityPriorityrw INTEGER .1.3.6.1.4.1.866.20.1.36.12.1.5 |
fciRemoteNetToMediaTableThis table contains the IP address translations
used for mapping from IP address to X121 address
for each IP router reachable through a WAN virtual
network.
Set any writable object(s) of this table to valid
value(s) with a new index value to create an entry
(the objects of the entry not present in this SET
REQUEST will take their default values). Set
fciRemStatus to 'invalid' to delete an entry. SEQUENCE OF FciRemoteNetToMediaEntry .1.3.6.1.4.1.866.20.1.36.15 |
fciRemoteNetToMediaEntryAn entry of fciRemoteNetToMediaTable. FciRemoteNetToMediaEntry .1.3.6.1.4.1.866.20.1.36.15.1 |
fciRemIpAddressThe value of this object is the IP address of one
IP router reachable through a WAN virtual network.
This IP address must be a valid host address.ro IpAddress .1.3.6.1.4.1.866.20.1.36.15.1.1 |
fciRemStatusThe value of this object indicates the state of
the entry of this table. It must be set to
'invalid' to delete the entry.
The default value is 'valid'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.15.1.2 |
fciRemRemoteAddressThe value of this object is the X121 address of
the called remote IP router. This address must
exist in fcvRvpConnectionTable.
This is a eight-bytes octet string with :
up to 15 digits in the range 0 to 9,
mandatory 'F' digits to pad the value until a
total of 16 digits (the equipment
configurator does not need this final
padding).
The default value is 'FF FF FF FF FF FF FF FF'
meaning 'empty value' (blank value on the
equipment configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.36.15.1.3 |
fciNetToMediaTableARP (Address Resolution Protocol) is in charge to
dynamically manage the IP address translations
used for mapping from IP address to MAC address
for each IP host or IP router reachable through a
LAN. This table contains translations which are
statically added to the dynamic ones.
Set any writable object(s) of this table to valid
value(s) with a new index value to create an entry
(the objects of the entry not present in this SET
REQUEST will take their default values). Set
fciNetToMediaStatus to 'invalid' to delete an
entry. SEQUENCE OF FciNetToMediaEntry .1.3.6.1.4.1.866.20.1.36.16 |
fciNetToMediaEntryAn entry of fciNetToMediaTable. FciNetToMediaEntry .1.3.6.1.4.1.866.20.1.36.16.1 |
fciNetToMediaIpAddressThe value of this object is the IP address of one
IP host or IP router reachable through a LAN
virtual network. This IP address must be a valid
host address.ro IpAddress .1.3.6.1.4.1.866.20.1.36.16.1.1 |
fciNetToMediaStatusThe value of this object indicates the state of
the entry of this table. It must be set to
'invalid' to delete the entry.
The default value is 'valid'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.16.1.2 |
fciNetToMediaMacAddressThe value of this object is the MAC address of
this IP host or IP router.
This is a six-bytes octet string with 12 digits in
the range 0 to F. Broadcasting (FF FF FF FF FF
FF), null (00 00 00 00 00 00) and group (bit 0 of
first byte equal to 1) addresses must not be used.
The default value is 'FF FF FF FF FF FF' meaning
'empty value' (blank value on the equipment
configurator).rw OCTET STRING .1.3.6.1.4.1.866.20.1.36.16.1.3 |
fciIpRouteTableRIP (Routing Information Protocol) or EGP
(External Gateway Protocol) are in charge to
dynamically manage the routes used by the IP
router. This table contains routes which are
statically added to the dynamic ones. SEQUENCE OF FciIpRouteEntry .1.3.6.1.4.1.866.20.1.36.20 |
fciIpRouteEntryAn entry of fciIpRouteTable. FciIpRouteEntry .1.3.6.1.4.1.866.20.1.36.20.1 |
fciRouteDestThe value of this object is the destination IP
address of this route. An entry with a value of
0.0.0.0 is considered a default route. This IP
address may be a network address (hosts bits set
to 0) or a host address (at least one hosts bit
set to 1).
The default value is '0.0.0.0'.ro IpAddress .1.3.6.1.4.1.866.20.1.36.20.1.1 |
fciRouteMaskThe value of this object is the subnet mask
associated with the IP address of this virtual
port. The value of the mask is an IP address with
all the network bits set to 1 and all the hosts
bits set to 0. In the absence of subnets, the mask
contains 255.0.0.0 for an address of class A,
255.255.0.0 for class B, 255.255.255.0 for class
C.
If the value of fciRouteDest is 0.0.0.0 (a default
route), then the mask value is also 0.0.0.0.
The default value is '255.255.255.0'.ro IpAddress .1.3.6.1.4.1.866.20.1.36.20.1.2 |
fciRouteStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.20.1.3 |
fciRouteNextHopThe value of this object is the IP address of the
next hop of this route. This IP address must be a
valid host address.
The default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.866.20.1.36.20.1.4 |
fciRouteMetricThe value of this object is the routing metric for
this route. The search algorithm is based on
metrics for choosing between several possible
routes to reach the destination of an IP datagram.
In the case of RIP, the metrics indicates the
number of IP routers through which an IP datagram
must pass to reach its destination. The algorithm
chooses preferably the shortest metric route.
The authorized values are '1..15'. The default
value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.20.1.5 |
fciFlowManagement OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.36.30 |
fciFlowTableThis table defines the flows. A flow is a
selection of IP datagrams coming from a local
virtual port (i.e., froma a LAN). SEQUENCE OF FciFlowEntry .1.3.6.1.4.1.866.20.1.36.30.1 |
fciFlowEntryAn entry of fciFlowTable. FciFlowEntry .1.3.6.1.4.1.866.20.1.36.30.1.1 |
fciFlowFlowIdThe value of this object identifies one and only
one flow. A flow is a selection of IP datagrams
coming from a local virtual port (i.e., froma a
LAN). Several flows may belong to the same family.
This flow uses a combination of several conditions
defined below. A flow selects the received IP
datagrams which simultaneously verify those of the
conditions which are meaningful for this flow.
When several flows are defined for the same VP
with overlapping conditions, the IP datagram
belongs to the first (in increasing order of flow
identifiers) of all the flows that select it. So
the numbering order must be done with a particular
attention.
By convention, if none of the conditions of this
entry is meaningful, then every IP datagram is
selected (default flow).
The authorized values are '0..199'. If it is
unused, the value is '255'. The default value is
'255'.ro INTEGER .1.3.6.1.4.1.866.20.1.36.30.1.1.1 |
fciFlowStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.30.1.1.2 |
fciFlowTypeThe value of this object indicates the family to
which belong any IP datagram selected by the
conditions defining this flow. Several flows may
belong to the same family. The transmission of the
family of IP datagrams over WAN virtual networks
is defined by fcvRvpConnFlowTypeMask.
By convention, the family 0 groups together all
the IP datagrams that the router has to reject
(filtering at the IP level) whereas the filtering
described in fcvLvpFltFilteringTable concerns all
the traffic received on one of the IP, IPX or CNLP
routers or bridge.
The authorized values are : 0, 1, 2, 4, 8, 16, 32,
64 and 128. The default value is '255'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.30.1.1.3 |
fciFlowVpIdThe value of this object specifies the virtual
port for which the flow is defined. Any IP
datagram received on this VP will go through the
evaluations of the meaningful conditions defined
for this flow and it is selected if all these
comparisons produce positive results.rw INTEGER .1.3.6.1.4.1.866.20.1.36.30.1.1.5 |
fciFlowSrcIpAddressThe value of this object specifies the value with
which the source IP address field of all the IP
datagrams received on this VP is compared. If the
bits, selected by fciFlowSrcMask, from this value
are equal to the same bits from the source IP
address of a IP datagram then this IP datagram is
selected.
This condition on source IP address is meaningless
if fciFlowSrcMask is equal to '0.0.0.0' (no bits
selected).
The authorized values are all four bytes integer
with an IP address notation but this value is not
necessarily a valid IP address (e.g. 0.0.0.41 or
255.0.0.0). The default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.866.20.1.36.30.1.1.10 |
fciFlowSrcMaskThe value of this object specifies the bits from
fciFlowSrcIpAddress which are to be compared with
the same bits from the source IP address field of
all the IP datagrams received on this VP.
This condition on source IP address is meaningless
if this mask is equal to '0.0.0.0' (no bits
selected).
The authorized values are all four bytes integer
with an IP address notation but this value is not
necessarily a valid IP address mask (e.g.,
0,0,0,127 or 0,255,0,0). The default value is
'0.0.0.0'.rw IpAddress .1.3.6.1.4.1.866.20.1.36.30.1.1.11 |
fciFlowDestIpAddressThe value of this object specifies the value with
which the destination IP address field of all the
IP datagrams received on this VP is compared. If
the bits, selected by fciFlowDestMask, from this
value are equal to the same bits from the
destination IP address of a IP datagram then this
IP datagram is selected.
This condition on destination IP address is
meaningless if fciFlowDestMask is equal to
'0.0.0.0' (no bits selected).
The authorized values are all four bytes integer
with an IP address notation but this value is not
necessarily a valid IP address (e.g. 0.0.0.41 or
255.0.0.0). The default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.866.20.1.36.30.1.1.12 |
fciFlowDestMaskThe value of this object specifies the bits from
fciFlowDestIpAddress which are to be compared with
the same bits from the destination IP address
field of all the IP datagrams received on this VP.
This condition on destination IP address is
meaningless if this mask is equal to '0.0.0.0' (no
bits selected).
The authorized values are all four bytes integer
with an IP address notation but this value is not
necessarily a valid IP address mask (e.g.,
0,0,0,127 or 0,255,0,0). The default value is
'0.0.0.0'.rw IpAddress .1.3.6.1.4.1.866.20.1.36.30.1.1.13 |
fciFlowProtocolThe value of this object specifies the value with
which the protocol field of all the IP datagrams
received on this VP is compared. If these two
values are equal then the IP datagram is selected.
This field identifies the protocol transported by
IP (see PROTOCOL NUMBERS in RFC 1700). E.g. 1 =
ICMP, 6 = TCP, 8 = EGP, 17 = UDP ...
This condition on protocol is meaningless if this
value is equal to '0'.
The authorized values are '0..255'. The default
value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.30.1.1.14 |
fciFlowPortMinThe value of this object specifies the minimum
value with which the source port and destination
port fields of all the TCP/IP or UDP/IP datagrams
received on this VP are compared.
When fciFlowPortMax > fciFlowPortMin > 0, if the
value of at least one of the two fields from the
IP datagram is included inside these limits then
the IP datagram is selected.
When fciFlowPortMax > 0 and fciFlowPortMin = 0, if
the value of at least one of the two fields from
the IP datagram is equal to fciFlowPortMax then
the IP datagram is selected.
When fciFlowPortMax = 0 and fciFlowPortMin > 0, if
the value of at least one of the two fields from
the IP datagram is equal to fciFlowPortMin then
the IP datagram is selected.
When fciFlowPortMax = fciFlowPortMin = 0, this
condition on ports is meaningless.
Examples : (see WELL KNOWN PORT NUMBERS in RFC
1700); 21 = ftp, 23 = telnet, 67 = bootp
server, 68 = bootp client, 69 = ttfp, 161
= snmp, 162 = snmptrap.
The authorized values are '0..65535'. The default
value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.30.1.1.15 |
fciFlowPortMaxThe value of this object specifies the maximum
value with which the source port and destination
port fields of all the TCP/IP or UDP/IP datagrams
received on this VP are compared.
When fciFlowPortMax > fciFlowPortMin > 0, if the
value of at least one of the two fields from the
IP datagram is included inside these limits then
the IP datagram is selected.
When fciFlowPortMax > 0 and fciFlowPortMin = 0, if
the value of at least one of the two fields from
the IP datagram is equal to fciFlowPortMax then
the IP datagram is selected.
When fciFlowPortMax = 0 and fciFlowPortMin > 0, if
the value of at least one of the two fields from
the IP datagram is equal to fciFlowPortMin then
the IP datagram is selected.
When fciFlowPortMax = fciFlowPortMin = 0, this
condition on ports is meaningless.
Examples : (see WELL KNOWN PORT NUMBERS in RFC
1700); 21 = ftp, 23 = telnet, 67 = bootp
server, 68 = bootp client, 69 = ttfp, 161
= snmp, 162 = snmptrap.
The authorized values are '0..65535'. The default
value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.30.1.1.16 |
fciFlowLengthMaxThe value of this object specifies the value with
which the length of all the IP datagrams received
on this VP are compared. If the number of octets
in the IP datagram is less or equal to this value
then the IP datagram is selected.
This condition on length is meaningless if this
value is equal to '0'.
The authorized values are '0..65535'. The default
value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.30.1.1.17 |
fciFlowSegmentedThe value of this object specifies the selection
of segmented IP datagrams received on this VP :
notChecked : This condition on segmentation is
meaningless.
no : The IP datagrams not segmented are
selected.
yes : The IP datagrams segmented are selected.
The default value is 'notChecked'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.30.1.1.18 |
fciFlowAddrSubstituteTableThis table is used for replacing the IP
destination address contained in every IP datagram
belonging to a specific flow by a precise IP
address. This substitution takes place before the
frame is examined by the IP routing.
Therefore, it is possible, for instance, to orient
the IP/UDP traffic distributed towards a specific
recipient.. SEQUENCE OF FciFlowAddrSubstituteEntry .1.3.6.1.4.1.866.20.1.36.30.2 |
fciFlowAddrSubstituteEntryAn entry of fciFlowAddrSubstituteTable. FciFlowAddrSubstituteEntry .1.3.6.1.4.1.866.20.1.36.30.2.1 |
fciFlowSubstFlowIdThe value of this object identifies one and only
one flow. A flow is a selection of IP datagrams
coming from a local virtual port (i.e., froma a
LAN). It must exist in fciFlowTable.
The authorized values are '0..199'. If it is
unused, the value is '255'. The default value is
'255'.ro INTEGER .1.3.6.1.4.1.866.20.1.36.30.2.1.1 |
fciFlowSubstDestIpAddressThe value of this object is the new destination IP
address which replaces the existing one in all IP
datagrams belonging to this flow. This IP address
must be a broadcasting IP address (hosts bits set
to 1) or a host address (at least one hosts bit
set to 1).
The default value is '0.0.0.0'.ro IpAddress .1.3.6.1.4.1.866.20.1.36.30.2.1.2 |
fciFlowSubstStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.30.2.1.3 |
fciFlowRouteTableThis table contains routes which are statically
defined for particular flows (this permits to
bypass the normal IP routing process). SEQUENCE OF FciFlowRouteEntry .1.3.6.1.4.1.866.20.1.36.30.20 |
fciFlowRouteEntryAn entry of fciFlowRouteTable. FciFlowRouteEntry .1.3.6.1.4.1.866.20.1.36.30.20.1 |
fciFlowRouteFlowIdThe value of this object identifies one and only
one flow. A flow is a selection of IP datagrams
coming from a local virtual port (i.e., froma a
LAN). It must exist in fciFlowTable.
The authorized values are '0..199'. If it is
unused, the value is '255'. The default value is
'255'.ro INTEGER .1.3.6.1.4.1.866.20.1.36.30.20.1.1 |
fciFlowRouteStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.30.20.1.2 |
fciFlowRouteNextHopThe value of this object is the IP address of the
next hop of the route used by this flow. This IP
address must be a valid host address.
The default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.866.20.1.36.30.20.1.3 |
fciRip OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.36.40 |
fciRipAdminStatusThe value of this object indicates whether RIP
(Routing Information Protocol) is enabled or not :
off : RIP is not enabled,
on : RIP is enabled in 'active mode (it learns
the routes transmitted by the adjacents
routers to complete the routing table and
itself distributes all or part of the
routes contained in the routing table),
quiet : RIP is enabled in 'passive mode (it
learns the routes transmitted by the
adjacents routers to complete the routing
table but itself does not distribute
anything).
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.40.1 |
fciRipStaticRoutesDistributionThe value of this object indicates whether RIP
distributes static entries of the routing table
(i.e., those defined in fciIpRouteTable) or not.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.40.2 |
fciRipEgpRoutesDistributionThe value of this object indicates whether RIP
distributes entries of the routing table learnt by
EGP (Exterior Gateway Protocol) or not. The
autonomous systems from which these routing
informations are distributed are defined in
fciRipEgpRoutesDistributionTable.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.40.3 |
fciRipDistributionTimerThe value of this object indicates the waiting
time in seconds between two successive
transmissions of informations from the routing
table by RIP.
The authorized values are '30..3600'. The default
value is '30'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.40.4 |
fciRipPreferenceThe value of this object controls preference for
routes learned (imported) by RIP, relative to
routes to same destination learned by others
protocols.
'0' is high preference. '255' is low preference.rw INTEGER .1.3.6.1.4.1.866.20.1.36.40.5 |
fciRipOspfRoutesDistributionThe value of this object indicates whether RIP
distributes entries of the routing table learnt by
OSPF (Open Shortest Path First) protocol or not.
The metric used is specified by the field
fciRipOspfRoutesDistributionMetric.rw Enumeration .1.3.6.1.4.1.866.20.1.36.40.6 |
fciRipOspfRoutesDistributionMetricThe value of this object indicates the metric
used by RIP when propagating (exporting) routes
learnt via OSPF.rw INTEGER .1.3.6.1.4.1.866.20.1.36.40.7 |
fciRipStaticRoutesDistributionMetricThe value of this object indicates the metric used
by RIP when propagating (exporting) static routes.rw INTEGER .1.3.6.1.4.1.866.20.1.36.40.8 |
fciRipVirtualPortTableThis table defines the RIP parameters of virtual
ports. This table is meaningless if there is at
least one entry in fciRipNeighborTable (in this
case RIP learns [and/or sends] routing
informations only from [and/or to] the neighbors
defined in that table). SEQUENCE OF FciRipVirtualPortEntry .1.3.6.1.4.1.866.20.1.36.40.10 |
fciRipVirtualPortEntryAn entry of fciRipVirtualPortTable. FciRipVirtualPortEntry .1.3.6.1.4.1.866.20.1.36.40.10.1 |
fciRipVpVirtualPortIdThe value of this object identifies one and only
one virtual port.
The authorized values are '0..199'. If it is
unused, the value is '255'. The default value is
'255'.ro INTEGER .1.3.6.1.4.1.866.20.1.36.40.10.1.1 |
fciRipVpDistributionThe value of this object indicates whether
performs its information exchanges on the IP
network attached to this virtual port or not.
The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.40.10.1.2 |
fciRipVpMetricOutThe RIP output metric of this interface. This
metric will be added to routes that are send via
the interface. This parameter can be used to make
other routers prefer other sources of RIP routes
over this router.rw INTEGER .1.3.6.1.4.1.866.20.1.36.40.10.1.3 |
fciRipVpRipInThe RIP input interface's administrative status.
The value 'on' denotes that RIP packets received
on this interface will be accepted. The value
'off' denotes that no RIP received packets will be
accepted.rw Enumeration .1.3.6.1.4.1.866.20.1.36.40.10.1.4 |
fciRipVpMetricInThe RIP input metric of this interface. This
metric will be added to incoming routes before
they are installed in the routing table. This
parameter can be used to make this router prefer
RIP routes learned via the specified interface
less than RIP routes from other interface.rw INTEGER .1.3.6.1.4.1.866.20.1.36.40.10.1.5 |
fciRipVpVersionThe RIP output packets version. The value of this
object indicates the version of RIP packets sent
on the interface. The value 'ripVersion1' implies
sending RIP updates compliant with RFC 1058.
'ripVersion2' implies sending RIP updates
compliant with RFC 1388.rw Enumeration .1.3.6.1.4.1.866.20.1.36.40.10.1.6 |
fciRipVpMulticastThe RIP-2 multicast output interface's
administrative status. The value 'on' implies
sending RIP updates using the multicast capability.rw Enumeration .1.3.6.1.4.1.866.20.1.36.40.10.1.7 |
fciRipVpAuthTypeType of authentication shema used on the interface.rw Enumeration .1.3.6.1.4.1.866.20.1.36.40.10.1.8 |
fciRipVpAuthKeyThe value to be used as the Authentication Key
whenever the corresponding instance of
fciRipVpAuthType has the value simplePassword. A
modification of the corresponding instance of
fciRipVpAuthType does not modify the
fciRipVpAuthKey value. If a string shorter than 16
octets is supplied, it will be left-justified and
padded to 16 octets, on the right, with nulls
(0x00). Reading this object always results in an
OCTET STRING of length zero; authentication may
not be bypassed by reading the MIB object.rw DisplayString .1.3.6.1.4.1.866.20.1.36.40.10.1.9 |
fciRipNeighborTableThis table defines the neighbors (i.e., the
adjacent routers with RIP enabled) with witch RIP
exchange routing informations. If this table is
empty RIP uses fciRipVirtualPortTable. SEQUENCE OF FciRipNeighborEntry .1.3.6.1.4.1.866.20.1.36.40.20 |
fciRipNeighborEntryAn entry of fciRipNeighborTable. FciRipNeighborEntry .1.3.6.1.4.1.866.20.1.36.40.20.1 |
fciRipNeighborIpAddressThe value of this object is the IP address of a
neighbor (i.e., an adjacent router with RIP
enabled). This IP address must be a valid host
address.
The default value is '0.0.0.0'.ro IpAddress .1.3.6.1.4.1.866.20.1.36.40.20.1.1 |
fciRipNeighborStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.40.20.1.2 |
fciRipNeighborOutputThis flag indicates whether the neighbor is a
gateway to which RIP will send RIP packets (value
: on or on V1 ) or not (value : off ). If the
value is bck or bck V1 , RIP will send packets
only if all members of the RIP backup group are
down.
The value on or bck force RIP to send RIP V2
packets if the RIP output packets version on that
VP is RIP V2, or to send RIP V1 packets if the RIP
output packets version on that VP is RIP V1.
The value on V1 or bck V1 , is used when the
neighbor doesn't support RIP V2, that value force
RIP to send RIP V1 compatible packets compliant
with RFC 1388.rw Enumeration .1.3.6.1.4.1.866.20.1.36.40.20.1.3 |
fciRipNeighborInputThis flag indicates whether the neighbor is a
gateway from which RIP will accept RIP packets or
not.rw Enumeration .1.3.6.1.4.1.866.20.1.36.40.20.1.4 |
fciRipNeighborBackupGroupThis flag indicates the RIP backup group number
of the neighbor. If the neighbor doesn't belong to
a group, the value is 255 (default value).rw INTEGER .1.3.6.1.4.1.866.20.1.36.40.20.1.5 |
fciRipEgpRoutesDistributionTableAs defined by fciRipEgpRoutesDistribution, when
RIP distributes entries of the routing table
learnt by EGP (Exterior Gateway Protocol), this
table defines which of these entries are to be
distributed. Only entries learnt from a router of
an automous system specified in this table are
distributed by RIP. SEQUENCE OF FciRipEgpRoutesDistributionEntry .1.3.6.1.4.1.866.20.1.36.40.30 |
fciRipEgpRoutesDistributionEntryAn entry of fciRipEgpRoutesDistributionTable. FciRipEgpRoutesDistributionEntry .1.3.6.1.4.1.866.20.1.36.40.30.1 |
fciRipEgpRoutesAsNumberThe value of this object identifies an autonomous
system containing routers delivering the routing
information that RIP distributes. This AS must
exist in fciEgpNeighborTable.
The authorized values are '1..65534'. The default
value is '0'.ro INTEGER .1.3.6.1.4.1.866.20.1.36.40.30.1.1 |
fciRipEgpRoutesStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.40.30.1.2 |
fciRipEgpRoutesMetricThe value of this object is the value indicated in
the transmitted RIP datagrams concerning routing
information learnt by EGP and coming from this
autonomous system.
The authorized values are '1..15'. The default
value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.40.30.1.3 |
fciOspf OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.36.41 |
fciOspfGeneralParameters OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.36.41.1 |
fciOspfAdminStatusOSPF administrative status. The administrative
status of OSPF in the router. The value 'on'
denotes that the OSPF Process is active on at
least one interface ; 'off' disables OSPF on all
interfaces.rw Enumeration .1.3.6.1.4.1.866.20.1.36.41.1.1 |
fciOspfRouterIdOSPF router Id. A 32-bit integer uniquely
identifying the router in the autonomous system.
By convention, to ensure uniqueness, this should
default to the value of one of the router's IP
interface addresses.rw IpAddress .1.3.6.1.4.1.866.20.1.36.41.1.2 |
fciOspfRoutesPreferenceOSPF routes preference. Specifies the preference
with which routes learned by OSPF are imported
into the routing tables.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.1.3 |
fciOspfAsePreferenceOSPF ASE preference. Specifies the preference with
which routes external to the Autonomous System
learned by OSPF are imported into the routing
tables.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.1.4 |
fciOspfVirtualPortsTableOSPF Interface Table. The OSPF Interface Table
augments the ifTable with OSPF specific
information. Each OSPF Interface Entry describes
one interface from the viewpoint of OSPF. SEQUENCE OF FciOspfVirtualPortsEntry .1.3.6.1.4.1.866.20.1.36.41.10 |
fciOspfVirtualPortsEntryAn entry of fciOspfVirtualPortsTable. FciOspfVirtualPortsEntry .1.3.6.1.4.1.866.20.1.36.41.10.1 |
fciOspfVpIdOSPF VP id. The VP id identifying this OSPF
interface.ro INTEGER .1.3.6.1.4.1.866.20.1.36.41.10.1.1 |
fciOspfVpAdminStatusOSPF VP administrative status. The OSPF
interface's administrative status. The value 'on'
denotes that neighbor relationships may be formed
on the interface, and the interface will be
advertised as an internal route to some area. The
value 'off' denotes that the interface is external
to OSPF. This parameter defaults to the value 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.41.10.1.2 |
fciOspfVpAreaIdOSPF VP area id. A 32-bit integer uniquely
identifying the area to which the interface
connects. This parameter defaults to the value
'0.0.0.0' which is used for the OSPF backbone.rw IpAddress .1.3.6.1.4.1.866.20.1.36.41.10.1.3 |
fciOspfVpMetricOSPF VP metric. The metric of using this type of
service on this interface. The default value of
the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF
is distinguished to mean 'no route via this TOS'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.10.1.4 |
fciOspfVpTypeOSPF VP type. The OSPF interface type. By way of a
default, this field may be intuited from the
corresponding value of ifType. Broadcast LANs,
such as Ethernet and IEEE 802.5, take the value
'broadcast', X.25, Frame Relay, and similar
technologies take the value 'nbma', and links that
are definitively point to point take the value
'pointToPoint'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.41.10.1.5 |
fciOspfVpDRPriorityOSPF VP DR priority. The priority of this
interface. Used in multi-access networks, this
field is used in the designated router election
algorithm. The value 0 signifies that the router
is not eligible to become the designated router on
this particular network. In the event of a tie in
this value, routers will use their router id as a
tie breaker. This parameter defaults to the value
'1'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.10.1.6 |
fciOspfVpTransitDelayOSPF VP transit delay. The estimated number of
seconds it takes to transmit a link state update
packet over this interface. This parameter
defaults with the value '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.10.1.7 |
fciOspfVpRetransmitIntervalOSPF VP retransmit interval. The number of seconds
between link-state advertisement retransmissions,
for adjacencies belonging to this interface. This
value is also used when retransmitting database
description and link-state request packets. This
parameter defaults to the value '5'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.10.1.8 |
fciOspfVpHelloIntervalOSPF VP hello interval. The length of time, in
seconds, between the Hello packets that the router
sends on the interface. This value must be the
same for all routers attached to a common
network.This parameter defaults with the value
'10'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.10.1.9 |
fciOspfVpRouterDeadIntervalOSPF VP router dead interval. The number of
seconds that a router's Hello packets have not
been seen before it's neighbors declare the router
down. This should be some multiple of the Hello
interval. This value must be the same for all
routers attached to a common network. This
parameter defaults with the value '40'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.10.1.10 |
fciOspfVpPollIntervalOSPF VP poll interval. The larger time interval,
in seconds, between the Hello packets sent to an
inactive non-broadcast multi-access neighbor. This
parameter defaults with the value '120'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.10.1.11 |
fciOspfVpAuthenticationKeyOSPF VP authentication key. The Authentication
Key. If the Area's Authentication Type is
simplePassword, and the key length is shorter than
8 octets, the agent will left adjust and zero fill
to 8 octets. When read, ospfIfAuthKey always
returns an Octet String of length zero. This
parameter defaults with the value
'0000000000000000h'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.41.10.1.12 |
fciOspfNeighborsTableOSPF Neighbors Table. The OSPF Neighbors Table
describes all neighbors in the locality of the
subject router. Each entry contains the
information regarding a single neighbor. SEQUENCE OF FciOspfNeighborsEntry .1.3.6.1.4.1.866.20.1.36.41.20 |
fciOspfNeighborsEntryAn entry of fciOspfNeighborsTable. FciOspfNeighborsEntry .1.3.6.1.4.1.866.20.1.36.41.20.1 |
fciOspfNeighborIpAddressNeighbor IP address. The IP address of this
neighbor.ro IpAddress .1.3.6.1.4.1.866.20.1.36.41.20.1.1 |
fciOspfNeighborStatusStatus. The value of this object indicates the
state of the entry of this table. The default
value is 'valid'. It must be set to 'invalid' to
delete the entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.41.20.1.2 |
fciOspfNeighborEligibleStatusNeighbor eligible status. This parameter indicates
whether the neighbor is eligible for DR election.rw Enumeration .1.3.6.1.4.1.866.20.1.36.41.20.1.3 |
fciOspfAreasTableThe OSPF Area Data Structure contains informations
regarding the various areas. The interfaces and
the virtual links are configured as part of these
areas. Area 0.0.0.0, by definition, is the
Backbone Area. Each entry describes the configured
parameters of one of the router's attached areas. SEQUENCE OF FciOspfAreasEntry .1.3.6.1.4.1.866.20.1.36.41.30 |
fciOspfAreasEntryAn entry of fciOspfAreasTable. FciOspfAreasEntry .1.3.6.1.4.1.866.20.1.36.41.30.1 |
fciOspfAreaIdArea id. A 32-bit integer uniquely identifying an
area. This parameter defaults to the value
'0.0.0.0' which is used to identify the OSPF
backbone.ro IpAddress .1.3.6.1.4.1.866.20.1.36.41.30.1.1 |
fciOspfAreaStatusStatus. The value of this object indicates the
state of the entry of this table. The default
value is 'valid'. It must be set to 'invalid' to
delete the entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.41.30.1.2 |
fciOspfAreaAuthTypeArea authentication type. The authentication type
specified for an area. This parameter defaults to
the 'none' value and can take the value
'simplePassword' to enable authentication into the
area.rw Enumeration .1.3.6.1.4.1.866.20.1.36.41.30.1.3 |
fciOspfAreaStubStatusArea stub status. This parameter indicates whether
the area is a stub area or not.rw Enumeration .1.3.6.1.4.1.866.20.1.36.41.30.1.4 |
fciOspfAreaStubMetricArea stub metric. The OSPF metric associated to
the stub area.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.30.1.5 |
fciOspfAreaRangesTableOSPF Address Range Table. The Address Range Table
acts as an adjunct to the Area Table ; It
describes those Address Range Summaries that are
configured to be propagated from an Area to reduce
the amount of information about it which is known
beyond its borders. A range of IP addresses is
specified by an IP address/IP network mask pair.
For example, Class B address range of X.X.X.X with
a network mask of 255.255.0.0 includes all IP
addresses from X.X.0.0 to X.X.255.255. SEQUENCE OF FciOspfAreaRangesEntry .1.3.6.1.4.1.866.20.1.36.41.33 |
fciOspfAreaRangesEntryAn entry of fciOspfAreaRangesTable. FciOspfAreaRangesEntry .1.3.6.1.4.1.866.20.1.36.41.33.1 |
fciOspfAreaRangeIpAddressArea range IP address. The IP Address of the Net
or Subnet indicated by the range.ro IpAddress .1.3.6.1.4.1.866.20.1.36.41.33.1.1 |
fciOspfAreaRangeIpMaskArea range IP mask. The Subnet Mask that pertains
to the Net or Subnet.ro IpAddress .1.3.6.1.4.1.866.20.1.36.41.33.1.2 |
fciOspfAreaRangeStatusStatus. The value of this object indicates the
state of the entry of this table. The default
value is 'valid'. It must be set to 'invalid' to
delete the entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.41.33.1.3 |
fciOspfAreaRangeAreaIdArea range area id. The Area the Address Range is
to be found within.rw IpAddress .1.3.6.1.4.1.866.20.1.36.41.33.1.4 |
fciOspfAreaRangeRestrictRestriction. The value 'off' indicates that
intra-area LSAs that fall within the specified
range are not advertised into other areas as
inter-area routes. Instead, the specified range
are advertised as summary network LSAs. The value
'on' specifies that the summary network LSAs are
not advertised.rw Enumeration .1.3.6.1.4.1.866.20.1.36.41.33.1.5 |
fciOspfVirtualLinksTableOSPF Virtual Link Table. The Virtual Link Table
describes the virtual links that the OSPF Process
is configured to carry on. SEQUENCE OF FciOspfVirtualLinksEntry .1.3.6.1.4.1.866.20.1.36.41.36 |
fciOspfVirtualLinksEntryAn entry of fciOspfVirtualLinksTable. FciOspfVirtualLinksEntry .1.3.6.1.4.1.866.20.1.36.41.36.1 |
fciOspfVlNeighborIdVL neighbor id. The Router ID of the Virtual
Neighbor.ro IpAddress .1.3.6.1.4.1.866.20.1.36.41.36.1.1 |
fciOspfVlTransitAreaIdVL transit area id. The Transit Area that the
Virtual Link traverses. By definition, this is not
0.0.0.0.ro IpAddress .1.3.6.1.4.1.866.20.1.36.41.36.1.2 |
fciOspfVlStatusStatus. The value of this object indicates the
state of the entry of this table. The default
value is 'valid'. It must be set to 'invalid' to
delete the entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.41.36.1.3 |
fciOspfVlDRPriorityVL DR priority. The priority of this virtual
link. Used in multi-access networks, this field
is used in the designated router election
algorithm. The value 0 signifies that the router
is not eligible to become the designated router on
this particular network. In the event of a tie in
this value, routers will use their router id as a
tie breaker. This parameter defaults to the value
'1'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.36.1.4 |
fciOspfVlTransitDelayVL transit delay. The estimated number of seconds
it takes to transmit a link-state update packet
over this interface.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.36.1.5 |
fciOspfVlRetransmitIntervalVL retransmit interval. The number of seconds
between link-state advertisement retransmissions,
for adjacencies belonging to this interface. This
value is also used when retransmitting database
description and link-state request packets. This
value should be well over the expected round-trip.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.36.1.6 |
fciOspfVlHelloIntervalVL hello interval. The length of time, in seconds,
between the Hello packets that the router sends on
the interface. This value must be the same for
the virtual neighbor.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.36.1.7 |
fciOspfVlRouterDeadIntervalVL router dead interval. The number of seconds
that a router's Hello packets have not been seen
before it's neighbors declare the router down.
This should be some multiple of the Hello
interval. This value must be the same for the
virtual neighbor.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.36.1.8 |
fciOspfVlAuthenticationKeyVL authentication key. If Authentication Type is
simplePassword, the device will left adjust and
zero fill to 8 octets. When read, ospfVifAuthKey
always returns a string of length zero.rw DisplayString .1.3.6.1.4.1.866.20.1.36.41.36.1.9 |
fciOspfExportingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.36.41.40 |
fciOspfAseExportIntervalASE flow packets interval. Together with
fciOspfAseExportLimit, controls the rate at which
Autonomous System External (ASE) routes are
imported. The rate is defined as the ratio of
fciOspfAseExportLimit and
fciOspfAseExportInterval, in number of routes per
second. By default, ASE routes are imported at
the rate of 100 ASEs per second.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.40.1 |
fciOspfAseExportLimitASE flow packets limit. Together with
fciOspfAseExportInterval, controls the rate at
which Autonomous System External (ASE) routes are
imported. The rate is defined as the ratio of
fciOspfAseExportLimit and
fciOspfAseExportInterval, in number of routes per
second. By default, ASE routes are imported at
the rate of 100 ASEs per second.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.40.2 |
fciOspfAseExportStaticsStatusStatics ASE export status.rw Enumeration .1.3.6.1.4.1.866.20.1.36.41.40.3 |
fciOspfAseExportStaticsMetricStatics ASE export metric. The default metric (or
cost) used by OSPF when propagating (exporting)
routes learned via other protocols.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.40.4 |
fciOspfAseExportStaticsTagStatics ASE export tag. The OSPF tag to be placed
on all routes exported by OSPF. Specifies one way
of generating OSPF tags.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.40.5 |
fciOspfAseExportStaticsTypeStatics ASE export type The OSPF external routes
type used to export static routes. The value '1'
indicates that the metric of the static routes
exported are directly comparable with OSPF metric.
The value '2' indicates the contrary.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.40.6 |
fciOspfAseExportRipStatusRIP ASE export status.rw Enumeration .1.3.6.1.4.1.866.20.1.36.41.40.7 |
fciOspfAseExportRipMetricRIP ASE export metric. The default metric (or
cost) used by OSPF when propagating (exporting)
routes learned via other protocols.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.40.8 |
fciOspfAseExportRipTagRIP ASE export tag. The OSPF tag to be placed on
all routes exported by OSPF. Specifies one way of
generating OSPF tags.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.40.9 |
fciOspfAseExportRipTypeRIP ASE export type The OSPF external routes type
used to export RIP routes. The value '1' indicates
that the metric of the static routes exported are
directly comparable with OSPF metric. The value
'2' indicates the contrary.rw INTEGER .1.3.6.1.4.1.866.20.1.36.41.40.10 |
fciEgp OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.36.45 |
fciEgpAdminStatusThe value of this object indicates whether EGP
(Exterior Gateway Protocol) is enabled or not.
fciEgpNeighborTable must contain at least one
entry.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.45.1 |
fciEgpAutonomousSystemNumberThe value of this object defines the autonomous
system to which belongs this IP router.
The authorized values are '1..65534'. The default
value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.45.2 |
fciEgpStaticRoutesDistributionThe value of this object indicates whether EGP
distributes static entries of the routing table
(i.e., those defined in fciIpRouteTable) or not..
The autonomous systems to which these routing
informations are distributed are defined in
fciEgpTargetAsDistributionTable.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.45.3 |
fciEgpRipRoutesDistributionThe value of this object indicates whether EGP
distributes entries of the routing table learnt by
RIP (Routing Information Protocol) or not. The
autonomous systems to which these routing
informations are distributed are defined in
fciEgpTargetAsDistributionTable.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.45.4 |
fciEgpMetricDistributionThe value of this object is the value indicated in
the transmitted EGP datagrams concerning routing
information learnt by RIP.
The authorized values are '1..255'. The default
value is '128'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.45.5 |
fciEgpNeighborTableThis table defines the EGP neighbors with witch
EGP exchanges routing informations. SEQUENCE OF FciEgpNeighborEntry .1.3.6.1.4.1.866.20.1.36.45.10 |
fciEgpNeighborEntryAn entry of fciEgpNeighborTable. FciEgpNeighborEntry .1.3.6.1.4.1.866.20.1.36.45.10.1 |
fciEgpNeighborIpAddressThe value of this object is the IP address of an
EGP neighbor. This IP address must be a valid host
address.
The default value is '0.0.0.0'.ro IpAddress .1.3.6.1.4.1.866.20.1.36.45.10.1.1 |
fciEgpNeighborStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.45.10.1.2 |
fciEgpNeighborAsNumberThe value of this object defines the autonomous
system to which belongs this EGP neighbor.
The authorized values are '1..65534'. The default
value is '1'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.45.10.1.3 |
fciEgpTargetAsDistributionTableAs defined by fciEgpStaticRoutesDistribution and
fciEgpRipRoutesDistribution, when EGP distributes
static entries or entries of the routing table
learnt by RIP (Routing Information Protocol), this
table defines to which autonomous systems these
entries are to be distributed. Only neighbors of
an automous system specified in this table will
receive these routing informations. SEQUENCE OF FciEgpTargetAsDistributionEntry .1.3.6.1.4.1.866.20.1.36.45.15 |
fciEgpTargetAsDistributionEntryAn entry of fciEgpTargetAsDistributionTable. FciEgpTargetAsDistributionEntry .1.3.6.1.4.1.866.20.1.36.45.15.1 |
fciEgpTargetAsNumberThe value of this object identifies an autonomous
system containing routers to which EGP distributes
the routing informations. This AS must exist in
fciEgpNeighborTable.
The authorized values are '1..65534'. The default
value is '0'.ro INTEGER .1.3.6.1.4.1.866.20.1.36.45.15.1.1 |
fciEgpTargetAsStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.45.15.1.2 |
fciSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.36.50 |
fciSnmpCommunityStringReadOnlyThe value of this object is the string which
identifies the 'public' community. The managers of
this community have only 'read-only' access rights
even on the objects with read-write access.
The SNMP agent of this equipment compares the
community string of a received GetRequest or
GetNextRequest to this value to know whether it
makes a GetResponse or not.
This value may contain up to 14 printable
characters. The default value is 'public'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.50.1 |
fciSnmpCommunityStringReadWriteThe value of this object is the string which
identifies the 'administrator' community. The
managers of this community have complete access
rights (i.e. they have the rights which are
defined in the MIB).
The SNMP agent of this equipment compares the
community string of a received GetRequest,
GetNextRequest or SetRequest to this value to know
whether it makes a GetResponse or not.
This value may contain up to 14 printable
characters. The default value is 'private'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.50.2 |
fciSnmpCommunityStringTrapThe value of this object is the string which
identifies the 'alarm' community. The managers of
this community may filter the received Traps
according of this community string.
The SNMP agent of this equipment sets the
community string of all the sent Trap to this
value. It sends traps to the managers defined in
fciSnmpManagerTable.
This value may contain up to 14 printable
characters. The default value is 'private'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.50.3 |
fciSnmpAuthenticationFailureTrapThe value of this object specifies whether the
SNMP agent sends the authenticationFailure trap or
not. When enabled, this trap is sent with each
reception of an unauthorized SNMP request
(erroneous community string or manager not
authorized).
It can be useful to disable this sending when
unauthorized SNMP managers polls very often the
SNMP agent because the quantity of
authenticationFailure trap is then very important
and prevents the 'good' manager to show correctly
the significant traps.
The default value is 'off'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.50.5 |
fciSnmpModule0TrapSourceAddrVpIdThe SNMP agent of module 0 indicates, as the
source address of each TRAP, the IP address
associated with the virtual port identified by
this value. This virtual port must exist in
fciVirtualPortTable.
The authorized values are '0..199'. The default
value is '0'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.50.10 |
fciSnmpModule1TrapSourceAddrVpIdThe SNMP agent of module 1 indicates, as the
source address of each TRAP, the IP address
associated with the virtual port identified by
this value. This virtual port must exist in
fciVirtualPortTable.
The authorized values are '0..199'. The default
value is '255' meaning 'empty value' (blank value
on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.36.50.11 |
fciSnmpModule2TrapSourceAddrVpIdThe SNMP agent of module 1 indicates, as the
source address of each TRAP, the IP address
associated with the virtual port identified by
this value. This virtual port must exist in
fciVirtualPortTable.
The authorized values are '0..199'. The default
value is '255' meaning 'empty value' (blank value
on the equipment configurator).rw INTEGER .1.3.6.1.4.1.866.20.1.36.50.12 |
fciSnmpManagerFilteringThe value of this object specifies whether the
SNMP agent answers to all the SNMP managers or
only to those defined in fciSnmpManagerTable. When
set to 'on' the SNMP agent sends an
authenticationFailure trap (if enabled) each time
it receives a request from a manager not in the
table.
The default value is 'off' (i.e., no filtering :
access for all managers)..rw Enumeration .1.3.6.1.4.1.866.20.1.36.50.15 |
fciSnmpManagerTableThis table contains the SNMP managers to which
SNMP traps may be sent. This table is also used to
define the authorized managers when
fciSnmpManagerFiltering is set to 'on'. SEQUENCE OF FciSnmpManagerEntry .1.3.6.1.4.1.866.20.1.36.50.20 |
fciSnmpManagerEntryAn entry of fciSnmpManagerTable. FciSnmpManagerEntry .1.3.6.1.4.1.866.20.1.36.50.20.1 |
fciSnmpManagerIpAddressThe value of this object is the IP address of an
SNMP manager. This IP address must be a valid host
address.
The default value is '0.0.0.0'.ro IpAddress .1.3.6.1.4.1.866.20.1.36.50.20.1.1 |
fciSnmpManagerStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.50.20.1.2 |
fciSnmpManagerSendTrapsThe value of this object specifies whether the
SNMP agent sends the traps to this SNMP manager or
not.
The default value is 'on'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.50.20.1.3 |
fciSnmpManagerTrapsUdpPortThe value of this object indicates the UDP port to
which are sent the SNMP traps. This value must be
the value used by this SNMP manager when it
listens for SNMP traps.
The authorized values are '0..65535'. The default
value is '162'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.50.20.1.4 |
fciBootP OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.36.60 |
fciBootPClient OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.36.60.1 |
fciBootPClientStartThe value of this object identifies start mode of
equipement.
The default value is 'no'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.60.1.1 |
fciBootPClientServerThe value of this object identifies server name.
This value may contain up to 64 printable
characters. The default value is an empty string.rw DisplayString .1.3.6.1.4.1.866.20.1.36.60.1.2 |
fciBootPClientBootFileThe value of this object identifies generic name
of bootfile.
This value may contain up to 64 printable
characters. The default value is an empty string.rw DisplayString .1.3.6.1.4.1.866.20.1.36.60.1.3 |
fciBootPClientBootTimeThe value of this object identifies time to wait
before bootp launching. Time is specified in
seconds.
The authorized values are '15..900'. The default
value is '180'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.60.1.4 |
fciBootPClientRetransNbThe value of this object identifies numbers of
retransmissions of bootrequest packet.
The authorized values are '0..10'. The default
value is '5'.rw INTEGER .1.3.6.1.4.1.866.20.1.36.60.1.5 |
fciBootPInterfaceTableThis table describes the parameters of BootP
Virtual Ports. It offers a solution to link many
servers on the bootp client or relay. SEQUENCE OF FciBootPInterfaceEntry .1.3.6.1.4.1.866.20.1.36.60.1.20 |
fciBootPInterfaceEntryAn entry of fciBootPInterfaceTable. FciBootPInterfaceEntry .1.3.6.1.4.1.866.20.1.36.60.1.20.1 |
fciBootPInterfaceVpIdThe value of this object identifies one virtual
port.
The default value is '255'.ro INTEGER .1.3.6.1.4.1.866.20.1.36.60.1.20.1.1 |
fciBootPInterfaceIpAddressThe value of this object is the IP address
associated to one bootp interface.
The default value is '255.255.255.255'.ro IpAddress .1.3.6.1.4.1.866.20.1.36.60.1.20.1.2 |
fciBootPInterfaceStatusThe value of this object indicates the state of
the entry of this table. The default value is
'valid'. It must be set to 'invalid' to delete the
entry.rw Enumeration .1.3.6.1.4.1.866.20.1.36.60.1.20.1.3 |
fciBootPInterfaceTypeThe value of this object indicates the
fonctionnality of the equipement.
The authorized values are 'client' or 'relay'. The
default value is 'client'.rw Enumeration .1.3.6.1.4.1.866.20.1.36.60.1.20.1.4 |
fciTelnet OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.36.70 |
fciTelnetConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.36.70.1 |
fciTelnetMaxSessionMaximum number of telnet session that the
equipment would accept. This number include the
telnet session issuing from the equipment.
The modification of this parameter need a reboot
of the equipment.
The default value is 6.rw INTEGER .1.3.6.1.4.1.866.20.1.36.70.1.1 |
fciTelnetTimerThis parameter is global to all connection and set
the timer that make a session to be disconnected
if no traffic is send or receive in the telnet
session.
The modification of the parameter takes effect
after a hot reset and is used for new connectionsrw INTEGER .1.3.6.1.4.1.866.20.1.36.70.1.2 |
fciTelnetPwd OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.36.70.10 |
fciTelnetPwdP0This parameter set the password to access to a
priority 0 level. All the user set to a priority 0
level have to uses this password.
The modification of the parameter takes effect
after a hot reset and is used for new connections
The default value is 'root'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.70.10.1 |
fciTelnetPwdP1This parameter set the password to access to a
priority 1 level. All the user set to a priority 1
level have to uses this password.
The modification of the parameter takes effect
after a hot reset and is used for new connections
The default value is 'user'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.70.10.2 |
fciTelnetPwdP2This parameter set the password to access to a
priority 2 level. All the user set to a priority 2
level have to uses this password.
The modification of the parameter takes effect
after a hot reset and is used for new connections
The default value is 'user'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.70.10.3 |
fciTelnetPwdP3This parameter set the password to access to a
priority 3 level. All the user set to a priority 3
level have to uses this password.
The modification of the parameter takes effect
after a hot reset and is used for new connections
The default value is 'user'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.70.10.4 |
fciTelnetPwdP4This parameter set the password to access to a
priority 4 level. All the user set to a priority 4
level have to uses this password.
The modification of the parameter takes effect
after a hot reset and is used for new connections
The default value is 'user'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.70.10.5 |
fciTelnetPwdP5This parameter set the password to access to a
priority 5 level. All the user set to a priority 5
level have to uses this password.
The modification of the parameter takes effect
after a hot reset and is used for new connections
The default value is 'user'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.70.10.6 |
fciTelnetPwdP6This parameter set the password to access to a
priority 6 level. All the user set to a priority 6
level have to uses this password.
The modification of the parameter takes effect
after a hot reset and is used for new connections
The default value is 'user'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.70.10.7 |
fciTelnetPwdP7This parameter set the password to access to a
priority 7 level. All the user set to a priority 7
level have to uses this password.
The modification of the parameter takes effect
after a hot reset and is used for new connections
The default value is 'user'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.70.10.8 |
fciTelnetPwdP8This parameter set the password to access to a
priority 8 level. All the user set to a priority 8
level have to uses this password.
The modification of the parameter takes effect
after a hot reset and is used for new connections
The default value is 'user'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.70.10.9 |
fciTelnetPwdP9This parameter set the password to access to a
priority 9 level. All the user set to a priority 9
level have to uses this password.
The modification of the parameter takes effect
after a hot reset and is used for new connections
The default value is 'user'.rw DisplayString .1.3.6.1.4.1.866.20.1.36.70.10.10 |
fciTelnetUserTable SEQUENCE OF FciTelnetUserEntry .1.3.6.1.4.1.866.20.1.36.70.30 |
fciTelnetUserEntryAn entry of fciTelnetUserTable. FciTelnetUserEntry .1.3.6.1.4.1.866.20.1.36.70.30.1 |
fciTelnetUserIdThis parameter identify the user.ro INTEGER .1.3.6.1.4.1.866.20.1.36.70.30.1.1 |
fciTelnetUserStatusThis parameter set the status of the rawrw Enumeration .1.3.6.1.4.1.866.20.1.36.70.30.1.2 |
fciTelnetUserLoginThis parameter set the login identification of the
user. The password ask to the user would the
associated priority password.
The modification of the parameter takes effect
after a hot reset and is used for new connections.rw DisplayString .1.3.6.1.4.1.866.20.1.36.70.30.1.3 |
fciTelnetUserPriorityThis parameter associate a priority level to a
user. The priority level give access right to
different service.
The default value is set to the lower priority
level.
The modification of the parameter takes effect
after a hot reset and is used for new connections.rw INTEGER .1.3.6.1.4.1.866.20.1.36.70.30.1.4 |
fcIpx OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.37 |
fcxInstance OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.37.1 |
fcxIpxRoutingActivationrw Enumeration .1.3.6.1.4.1.866.20.1.37.1.1 |
fcxBasicSysNameipxBasicSysNamerw DisplayString .1.3.6.1.4.1.866.20.1.37.1.12 |
fcxAdvSysMaxPathSplitsipxAdvSysMaxPathSplitsrw INTEGER .1.3.6.1.4.1.866.20.1.37.1.15 |
fcxAdvSysMaxHopsipxAdvSysMaxHopsrw INTEGER .1.3.6.1.4.1.866.20.1.37.1.16 |
fcxCircuits OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.37.10 |
fcxCircuitTable SEQUENCE OF FcxCircuitEntry .1.3.6.1.4.1.866.20.1.37.10.1 |
fcxCircuitEntryAn entry of fcxCircuitTable. FcxCircuitEntry .1.3.6.1.4.1.866.20.1.37.10.1.1 |
fcxCircCircuitIdCircuit idro INTEGER .1.3.6.1.4.1.866.20.1.37.10.1.1.1 |
fcxCircStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.37.10.1.1.2 |
fcxCircVirtualPortIdVP idrw INTEGER .1.3.6.1.4.1.866.20.1.37.10.1.1.3 |
fcxCircOperStateipxCircOperStaterw Enumeration .1.3.6.1.4.1.866.20.1.37.10.1.1.10 |
fcxCircNameipxCircNamerw DisplayString .1.3.6.1.4.1.866.20.1.37.10.1.1.11 |
fcxCircTypeipxCircTyperw Enumeration .1.3.6.1.4.1.866.20.1.37.10.1.1.12 |
fcxCircLocalMaxPacketSizeipxCircLocalMaxPacketSizerw INTEGER .1.3.6.1.4.1.866.20.1.37.10.1.1.13 |
fcxCircNetNumberipxCircNetNumberrw OCTET STRING .1.3.6.1.4.1.866.20.1.37.10.1.1.14 |
fcxCircChecksumEnablingCalcul du checksumrw Enumeration .1.3.6.1.4.1.866.20.1.37.10.1.1.20 |
fcxCircuitLocalVpTable SEQUENCE OF FcxCircuitLocalVpEntry .1.3.6.1.4.1.866.20.1.37.10.2 |
fcxCircuitLocalVpEntryAn entry of fcxCircuitLocalVpTable. FcxCircuitLocalVpEntry .1.3.6.1.4.1.866.20.1.37.10.2.1 |
fcxCircLvpCircuitIdCircuit idro INTEGER .1.3.6.1.4.1.866.20.1.37.10.2.1.1 |
fcxCircLvpStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.37.10.2.1.2 |
fcxCircLvpEncapsulationEncapsulationrw Enumeration .1.3.6.1.4.1.866.20.1.37.10.2.1.3 |
fcxCircuitRemoteVpTable SEQUENCE OF FcxCircuitRemoteVpEntry .1.3.6.1.4.1.866.20.1.37.10.3 |
fcxCircuitRemoteVpEntryAn entry of fcxCircuitRemoteVpTable. FcxCircuitRemoteVpEntry .1.3.6.1.4.1.866.20.1.37.10.3.1 |
fcxCircRvpCircuitIdCircuit idro INTEGER .1.3.6.1.4.1.866.20.1.37.10.3.1.1 |
fcxCircRvpStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.37.10.3.1.2 |
fcxCircRvpRemoteAddressAdresse WANrw OCTET STRING .1.3.6.1.4.1.866.20.1.37.10.3.1.3 |
fcxCircRvpLocalNodeAdresse localerw OCTET STRING .1.3.6.1.4.1.866.20.1.37.10.3.1.4 |
fcxRouting OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.37.20 |
fcxRoutInstance OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.37.20.1 |
fcxRoutType20PacketBroadcastingDiffusion des paquets IPX de type 20rw Enumeration .1.3.6.1.4.1.866.20.1.37.20.1.10 |
fcxRoutCircuitTable SEQUENCE OF FcxRoutCircuitEntry .1.3.6.1.4.1.866.20.1.37.20.10 |
fcxRoutCircuitEntryAn entry of fcxRoutCircuitTable. FcxRoutCircuitEntry .1.3.6.1.4.1.866.20.1.37.20.10.1 |
fcxRoutCircCircuitIdCircuit idro INTEGER .1.3.6.1.4.1.866.20.1.37.20.10.1.1 |
fcxRoutCircNcpSpoofingNetware Core Protocol Spoofingrw Enumeration .1.3.6.1.4.1.866.20.1.37.20.10.1.2 |
fcxRoutCircType20PacketBroadcastingDiffusion des paquets IPX de type 20rw Enumeration .1.3.6.1.4.1.866.20.1.37.20.10.1.3 |
fcxRoutCircAddressFilteringFiltrage sur adresse IPXrw Enumeration .1.3.6.1.4.1.866.20.1.37.20.10.1.4 |
fcxRoutIpxStaticRouteTable SEQUENCE OF FcxRoutIpxStaticRouteEntry .1.3.6.1.4.1.866.20.1.37.20.20 |
fcxRoutIpxStaticRouteEntryAn entry of fcxRoutIpxStaticRouteTable. FcxRoutIpxStaticRouteEntry .1.3.6.1.4.1.866.20.1.37.20.20.1 |
fcxRoutStaticRouteCircuitIdipxStaticRouteCircIndexro INTEGER .1.3.6.1.4.1.866.20.1.37.20.20.1.1 |
fcxRoutStaticRouteNetNumipxStaticRouteNetNumro OCTET STRING .1.3.6.1.4.1.866.20.1.37.20.20.1.2 |
fcxRoutStaticRouteStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.37.20.20.1.3 |
fcxRoutStaticRouteTicksipxStaticRouteTicks en 1/60eme de seconderw INTEGER .1.3.6.1.4.1.866.20.1.37.20.20.1.4 |
fcxRoutStaticRouteHopCountipxStaticRouteHopCountrw INTEGER .1.3.6.1.4.1.866.20.1.37.20.20.1.5 |
fcxRoutAddressFilteringTable SEQUENCE OF FcxRoutAddressFilteringEntry .1.3.6.1.4.1.866.20.1.37.20.30 |
fcxRoutAddressFilteringEntryAn entry of fcxRoutAddressFilteringTable. FcxRoutAddressFilteringEntry .1.3.6.1.4.1.866.20.1.37.20.30.1 |
fcxRoutAddrFltCircuitIdCircuit idro INTEGER .1.3.6.1.4.1.866.20.1.37.20.30.1.1 |
fcxRoutAddrFltFilterIdFiltre idro INTEGER .1.3.6.1.4.1.866.20.1.37.20.30.1.2 |
fcxRoutAddrFltStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.37.20.30.1.3 |
fcxRoutAddrFltFilteringActivation du filtrerw Enumeration .1.3.6.1.4.1.866.20.1.37.20.30.1.4 |
fcxRoutAddrFltFieldChamprw Enumeration .1.3.6.1.4.1.866.20.1.37.20.30.1.5 |
fcxRoutAddrFltMaskMasquerw OCTET STRING .1.3.6.1.4.1.866.20.1.37.20.30.1.6 |
fcxRoutAddrFltValueValeurrw OCTET STRING .1.3.6.1.4.1.866.20.1.37.20.30.1.7 |
fcxRoutingInformationProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.37.25 |
fcxRipInstance OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.37.25.1 |
fcxRipSysStateripSysStaterw Enumeration .1.3.6.1.4.1.866.20.1.37.25.1.1 |
fcxRipInputFilteringFiltrage RIP en entreerw Enumeration .1.3.6.1.4.1.866.20.1.37.25.1.2 |
fcxRipCircuitTable SEQUENCE OF FcxRipCircuitEntry .1.3.6.1.4.1.866.20.1.37.25.10 |
fcxRipCircuitEntryAn entry of fcxRipCircuitTable. FcxRipCircuitEntry .1.3.6.1.4.1.866.20.1.37.25.10.1 |
fcxRipCircCircuitIdCircuit idro INTEGER .1.3.6.1.4.1.866.20.1.37.25.10.1.1 |
fcxRipCircStateripCircStaterw Enumeration .1.3.6.1.4.1.866.20.1.37.25.10.1.10 |
fcxRipCircPaceripCircPacerw INTEGER .1.3.6.1.4.1.866.20.1.37.25.10.1.11 |
fcxRipCircUpdateripCircUpdaterw INTEGER .1.3.6.1.4.1.866.20.1.37.25.10.1.12 |
fcxRipCircAgeMultiplierripCircAgeMultiplierrw INTEGER .1.3.6.1.4.1.866.20.1.37.25.10.1.13 |
fcxRipCircPacketSizeripCircPacketSizerw INTEGER .1.3.6.1.4.1.866.20.1.37.25.10.1.14 |
fcxRipCircOutputFilteringFiltrage RIP en sortierw Enumeration .1.3.6.1.4.1.866.20.1.37.25.10.1.20 |
fcxRipInputFilteringTable SEQUENCE OF FcxRipInputFilteringEntry .1.3.6.1.4.1.866.20.1.37.25.11 |
fcxRipInputFilteringEntryAn entry of fcxRipInputFilteringTable. FcxRipInputFilteringEntry .1.3.6.1.4.1.866.20.1.37.25.11.1 |
fcxRipInFltFilterIdFiltre idro INTEGER .1.3.6.1.4.1.866.20.1.37.25.11.1.1 |
fcxRipInFltStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.37.25.11.1.2 |
fcxRipInFltFilteringActivation du filtrerw Enumeration .1.3.6.1.4.1.866.20.1.37.25.11.1.3 |
fcxRipInFltNetAddressAdresse reseaurw OCTET STRING .1.3.6.1.4.1.866.20.1.37.25.11.1.4 |
fcxRipInFltMaskMasque adresserw OCTET STRING .1.3.6.1.4.1.866.20.1.37.25.11.1.5 |
fcxRipOutputFilteringTable SEQUENCE OF FcxRipOutputFilteringEntry .1.3.6.1.4.1.866.20.1.37.25.12 |
fcxRipOutputFilteringEntryAn entry of fcxRipOutputFilteringTable. FcxRipOutputFilteringEntry .1.3.6.1.4.1.866.20.1.37.25.12.1 |
fcxRipOutFltCircuitIdCircuit idro INTEGER .1.3.6.1.4.1.866.20.1.37.25.12.1.1 |
fcxRipOutFltFilterIdFiltre idro INTEGER .1.3.6.1.4.1.866.20.1.37.25.12.1.2 |
fcxRipOutFltStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.37.25.12.1.3 |
fcxRipOutFltFilteringActivation du filtrerw Enumeration .1.3.6.1.4.1.866.20.1.37.25.12.1.4 |
fcxRipOutFltNetAddressAdresse reseaurw OCTET STRING .1.3.6.1.4.1.866.20.1.37.25.12.1.5 |
fcxRipOutFltMaskMasque adresserw OCTET STRING .1.3.6.1.4.1.866.20.1.37.25.12.1.6 |
fcxServices OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.37.30 |
fcxServInstance OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.37.30.1 |
fcxServSapSysStatesapSysStaterw Enumeration .1.3.6.1.4.1.866.20.1.37.30.1.1 |
fcxServSapInputFilteringFiltrage SAP en entreerw Enumeration .1.3.6.1.4.1.866.20.1.37.30.1.12 |
fcxServCircuitTable SEQUENCE OF FcxServCircuitEntry .1.3.6.1.4.1.866.20.1.37.30.10 |
fcxServCircuitEntryAn entry of fcxServCircuitTable. FcxServCircuitEntry .1.3.6.1.4.1.866.20.1.37.30.10.1 |
fcxServCircSapCircuitIdsapCircIndexro INTEGER .1.3.6.1.4.1.866.20.1.37.30.10.1.1 |
fcxServCircSapStatesapCircStaterw Enumeration .1.3.6.1.4.1.866.20.1.37.30.10.1.2 |
fcxServCircSapPacesapCircPacerw INTEGER .1.3.6.1.4.1.866.20.1.37.30.10.1.3 |
fcxServCircSapUpdatesapCircUpdaterw INTEGER .1.3.6.1.4.1.866.20.1.37.30.10.1.4 |
fcxServCircSapAgeMultipliersapCircAgeMultiplierrw INTEGER .1.3.6.1.4.1.866.20.1.37.30.10.1.5 |
fcxServCircSapPacketSizesapCircPacketSizerw INTEGER .1.3.6.1.4.1.866.20.1.37.30.10.1.6 |
fcxServCircSapGetNearestServerReplysapCircGetNearestServerReplyrw Enumeration .1.3.6.1.4.1.866.20.1.37.30.10.1.7 |
fcxServCircSapOutputFilteringFiltrage SAP en sortierw Enumeration .1.3.6.1.4.1.866.20.1.37.30.10.1.10 |
fcxServStaticServiceTable SEQUENCE OF FcxServStaticServiceEntry .1.3.6.1.4.1.866.20.1.37.30.20 |
fcxServStaticServiceEntryAn entry of fcxServStaticServiceTable. FcxServStaticServiceEntry .1.3.6.1.4.1.866.20.1.37.30.20.1 |
fcxServStaticServiceIdService Idro INTEGER .1.3.6.1.4.1.866.20.1.37.30.20.1.1 |
fcxServStaticStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.37.30.20.1.2 |
fcxServStaticCircuitIdipxStaticServCircIndexrw INTEGER .1.3.6.1.4.1.866.20.1.37.30.20.1.3 |
fcxServStaticNameipxStaticServNamerw DisplayString .1.3.6.1.4.1.866.20.1.37.30.20.1.4 |
fcxServStaticTypeipxStaticServTyperw OCTET STRING .1.3.6.1.4.1.866.20.1.37.30.20.1.5 |
fcxServStaticNetNumipxStaticServNetNumrw OCTET STRING .1.3.6.1.4.1.866.20.1.37.30.20.1.6 |
fcxServStaticNodeipxStaticServNoderw OCTET STRING .1.3.6.1.4.1.866.20.1.37.30.20.1.7 |
fcxServStaticSocketipxStaticServSocketrw OCTET STRING .1.3.6.1.4.1.866.20.1.37.30.20.1.8 |
fcxServStaticHopCountipxStaticServHopCountrw INTEGER .1.3.6.1.4.1.866.20.1.37.30.20.1.9 |
fcxServSapInputFilteringTable SEQUENCE OF FcxServSapInputFilteringEntry .1.3.6.1.4.1.866.20.1.37.30.30 |
fcxServSapInputFilteringEntryAn entry of fcxServSapInputFilteringTable. FcxServSapInputFilteringEntry .1.3.6.1.4.1.866.20.1.37.30.30.1 |
fcxServSapInFltFilterIdFiltre idro INTEGER .1.3.6.1.4.1.866.20.1.37.30.30.1.1 |
fcxServSapInFltStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.37.30.30.1.2 |
fcxServSapInFltFilteringActivation du filtrerw Enumeration .1.3.6.1.4.1.866.20.1.37.30.30.1.3 |
fcxServSapInFltCheckedFieldChamp evaluerw Enumeration .1.3.6.1.4.1.866.20.1.37.30.30.1.4 |
fcxServSapInFltServiceNameTypeType de nom de servicerw Enumeration .1.3.6.1.4.1.866.20.1.37.30.30.1.5 |
fcxServSapInFltServiceNameNom de servicerw DisplayString .1.3.6.1.4.1.866.20.1.37.30.30.1.6 |
fcxServSapInFltServiceTypeType de servicerw OCTET STRING .1.3.6.1.4.1.866.20.1.37.30.30.1.7 |
fcxServSapOutputFilteringTable SEQUENCE OF FcxServSapOutputFilteringEntry .1.3.6.1.4.1.866.20.1.37.30.31 |
fcxServSapOutputFilteringEntryAn entry of fcxServSapOutputFilteringTable. FcxServSapOutputFilteringEntry .1.3.6.1.4.1.866.20.1.37.30.31.1 |
fcxServSapOutFltCircuitIdCircuit idro INTEGER .1.3.6.1.4.1.866.20.1.37.30.31.1.1 |
fcxServSapOutFltFilterIdFiltre idro INTEGER .1.3.6.1.4.1.866.20.1.37.30.31.1.2 |
fcxServSapOutFltStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.37.30.31.1.3 |
fcxServSapOutFltFilteringActivation du filtrerw Enumeration .1.3.6.1.4.1.866.20.1.37.30.31.1.4 |
fcxServSapOutFltCheckedFieldChamp evaluerw Enumeration .1.3.6.1.4.1.866.20.1.37.30.31.1.5 |
fcxServSapOutFltServiceNameTypeType de nom de servicerw Enumeration .1.3.6.1.4.1.866.20.1.37.30.31.1.6 |
fcxServSapOutFltServiceNameNom de servicerw DisplayString .1.3.6.1.4.1.866.20.1.37.30.31.1.7 |
fcxServSapOutFltServiceTypeType de servicerw OCTET STRING .1.3.6.1.4.1.866.20.1.37.30.31.1.8 |
fcClnp OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.1.38 |
fccClnpRoutingAdminStatusrw Enumeration .1.3.6.1.4.1.866.20.1.38.1 |
fccLocalNetworkEntityTitleLocalNetrw OCTET STRING .1.3.6.1.4.1.866.20.1.38.2 |
fccErrorFramesSendingErrorFramesrw Enumeration .1.3.6.1.4.1.866.20.1.38.4 |
fccVirtualPortTable SEQUENCE OF FccVirtualPortEntry .1.3.6.1.4.1.866.20.1.38.10 |
fccVirtualPortEntryAn entry of fccVirtualPortTable. FccVirtualPortEntry .1.3.6.1.4.1.866.20.1.38.10.1 |
fccVpVirtualPortIdVP idro INTEGER .1.3.6.1.4.1.866.20.1.38.10.1.1 |
fccVpStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.38.10.1.2 |
fccVpMtuMTUrw INTEGER .1.3.6.1.4.1.866.20.1.38.10.1.4 |
fccLocalVirtualPortTable SEQUENCE OF FccLocalVirtualPortEntry .1.3.6.1.4.1.866.20.1.38.11 |
fccLocalVirtualPortEntryAn entry of fccLocalVirtualPortTable. FccLocalVirtualPortEntry .1.3.6.1.4.1.866.20.1.38.11.1 |
fccLvpVirtualPortIdVP idro INTEGER .1.3.6.1.4.1.866.20.1.38.11.1.1 |
fccLvpStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.38.11.1.2 |
fccLvpEsIsRedirectionEsIsRedirectsrw Enumeration .1.3.6.1.4.1.866.20.1.38.11.1.3 |
fccLvpEsIsConfigTimerEsIsConfigTimerrw INTEGER .1.3.6.1.4.1.866.20.1.38.11.1.4 |
fccLvpEsIsHoldingTimerEsIsHoldingTimerrw INTEGER .1.3.6.1.4.1.866.20.1.38.11.1.5 |
fccNeighborTable SEQUENCE OF FccNeighborEntry .1.3.6.1.4.1.866.20.1.38.20 |
fccNeighborEntryAn entry of fccNeighborTable. FccNeighborEntry .1.3.6.1.4.1.866.20.1.38.20.1 |
fccNeighNeighborIdNeighbor idro INTEGER .1.3.6.1.4.1.866.20.1.38.20.1.1 |
fccNeighStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.38.20.1.2 |
fccNeighTypeTyperw Enumeration .1.3.6.1.4.1.866.20.1.38.20.1.3 |
fccNeighVirtualPortIdVP idrw INTEGER .1.3.6.1.4.1.866.20.1.38.20.1.4 |
fccNeighClnpAddressAdresse IP-ISOrw OCTET STRING .1.3.6.1.4.1.866.20.1.38.20.1.5 |
fccLocalNeighborTable SEQUENCE OF FccLocalNeighborEntry .1.3.6.1.4.1.866.20.1.38.21 |
fccLocalNeighborEntryAn entry of fccLocalNeighborTable. FccLocalNeighborEntry .1.3.6.1.4.1.866.20.1.38.21.1 |
fccLneighNeighborIdNeighbor idro INTEGER .1.3.6.1.4.1.866.20.1.38.21.1.1 |
fccLneighStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.38.21.1.2 |
fccLneighMacAddressAdresse MACrw OCTET STRING .1.3.6.1.4.1.866.20.1.38.21.1.3 |
fccRemoteNeighborTable SEQUENCE OF FccRemoteNeighborEntry .1.3.6.1.4.1.866.20.1.38.22 |
fccRemoteNeighborEntryAn entry of fccRemoteNeighborTable. FccRemoteNeighborEntry .1.3.6.1.4.1.866.20.1.38.22.1 |
fccRneighNeighborIdNeighbor idro INTEGER .1.3.6.1.4.1.866.20.1.38.22.1.1 |
fccRneighStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.38.22.1.2 |
fccRneighRemoteAddressAdresse WANrw OCTET STRING .1.3.6.1.4.1.866.20.1.38.22.1.3 |
fccClnpRouteTable SEQUENCE OF FccClnpRouteEntry .1.3.6.1.4.1.866.20.1.38.30 |
fccClnpRouteEntryAn entry of fccClnpRouteTable. FccClnpRouteEntry .1.3.6.1.4.1.866.20.1.38.30.1 |
fccRoutRouteIdRoute idro INTEGER .1.3.6.1.4.1.866.20.1.38.30.1.1 |
fccRoutStatusStatusrw Enumeration .1.3.6.1.4.1.866.20.1.38.30.1.2 |
fccRoutDestClnpAddressAdresse IP-ISO destinationrw OCTET STRING .1.3.6.1.4.1.866.20.1.38.30.1.3 |
fccRoutNextHopNeighborIdNext Hop neighbor idrw INTEGER .1.3.6.1.4.1.866.20.1.38.30.1.5 |
frxManagement OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10 |
fmEvents OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.5 |
fmeTroubleReport OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.5.1 |
fmeTrblEventTypeThe value of this object is the cause of the
system starting.ro Enumeration .1.3.6.1.4.1.866.20.10.5.1.1 |
fmeTroubleReportInfoTableThis table contains the additional information
about the trouble report. It's the fatal error
zone : the snapshot of the memory and registers
when there is a trouble. It contains the registers
state, the system stack ... SEQUENCE OF FmeTroubleReportInfoEntry .1.3.6.1.4.1.866.20.10.5.1.2 |
fmeTroubleReportInfoEntryAn entry of fmeTroubleReportInfoTable. FmeTroubleReportInfoEntry .1.3.6.1.4.1.866.20.10.5.1.2.1 |
fmeTrblInfoIndexThe value of this object identifies one and only
one element of the trouble report.ro INTEGER .1.3.6.1.4.1.866.20.10.5.1.2.1.1 |
fmeTrblInfoDataThe value of this object is the data of this
element of the trouble report.ro DisplayString .1.3.6.1.4.1.866.20.10.5.1.2.1.2 |
fmeFamilyTableThis table contains general information about the
families of the outstanding events. For one
family, the maximum number of stored events is 6,
but all the families can store simultaneously at
most 3 events. So, the maximum number can
fluctuate following the busy memory. When one
event is added to the list of one family, the
oldest event is kept in memory, and the event is
added at the end of the list, with the possibility
of a rotation of the stored events if there is no
free memory. SEQUENCE OF FmeFamilyEntry .1.3.6.1.4.1.866.20.10.5.2 |
fmeFamilyEntryAn entry of fmeFamilyTable. FmeFamilyEntry .1.3.6.1.4.1.866.20.10.5.2.1 |
fmeFamFamilyIdThe value of this object identifies one and only
one family.ro Enumeration .1.3.6.1.4.1.866.20.10.5.2.1.1 |
fmeFamStoredEventsCountThe value of this object how many events are
stored for this family.ro INTEGER .1.3.6.1.4.1.866.20.10.5.2.1.2 |
fmeFamStoredEventsCommandThe value of this object permits, when it is set
to 'delete', to destroy the stored events of this
family. The equipment answers always with the
value 'ready' to a GetRequest on this object.rw Enumeration .1.3.6.1.4.1.866.20.10.5.2.1.3 |
fmeEventTableThis table contains the stored outstanding events. SEQUENCE OF FmeEventEntry .1.3.6.1.4.1.866.20.10.5.3 |
fmeEventEntryAn entry of fmeEventTable. FmeEventEntry .1.3.6.1.4.1.866.20.10.5.3.1 |
fmeEvtFamilyIdThe value of this object identifies one and only
one family. This is the family this outstanding
event belongs to.ro Enumeration .1.3.6.1.4.1.866.20.10.5.3.1.1 |
fmeEvtEventIndexThe value of this object identifies one and only
one outstanding event of this familty.ro INTEGER .1.3.6.1.4.1.866.20.10.5.3.1.2 |
fmeEvtEventTypeThe value of this object is the event type. See
the management function manual for more
information on the description of the events.ro OCTET STRING .1.3.6.1.4.1.866.20.10.5.3.1.3 |
fmeEvtTimeThe value of this object is the value of sysUpTime
when this event was stored.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.20.10.5.3.1.4 |
fmeEvtLineIdThe value of this object is the identifier of the
line where this event takes place. The value '255'
means 'general' (i.e., not a particular line).ro INTEGER .1.3.6.1.4.1.866.20.10.5.3.1.5 |
fmeEvtDataThe value of this object contains additional data
for this event.ro DisplayString .1.3.6.1.4.1.866.20.10.5.3.1.6 |
fmeTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.5.4 |
fmeTrapLineIdThe value of this object is the identifier of the
line where the event takes place. The value '255'
means 'general' (i.e., not a particular line).
This object is only used in a Trap PDU and is not
accessible by GET requests.ro INTEGER .1.3.6.1.4.1.866.20.10.5.4.1 |
fmeTrapFamilyIdThe value of this object identifies one and only
one family. This is the family the outstanding
event belongs to.
This object is only used in a Trap PDU and is not
accessible by GET requests.ro Enumeration .1.3.6.1.4.1.866.20.10.5.4.2 |
fmeTrapEventTypeThe value of this object is the event type. See
the management function manual for more
information on the description of the events.
This object is only used in a Trap PDU and is not
accessible by GET requests.ro INTEGER .1.3.6.1.4.1.866.20.10.5.4.3 |
fmeTrapEventDataThe value of this object contains additional data
for the event.
This object is only used in a Trap PDU and is not
accessible by GET requests.ro DisplayString .1.3.6.1.4.1.866.20.10.5.4.4 |
fmStat OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10 |
fmStatControl OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.1 |
fmsCtrlStatusThe value of this object indicates the processing
state of the statistics. The value 'notInProgress'
indicates that there is only a SNMP access at the
management function. The value 'InProgress'
indicates that there is an access to the
management function which is not a SNMP access.ro Enumeration .1.3.6.1.4.1.866.20.10.10.1.1 |
fmsCtrlSummingThe value of this object is the summing mode of
the statistics. The value 'infinite' indicates
that the statistics are calculated since the last
counters reset. With the value 'notInfinite', the
statistics are calculated on the configurable
period, which there is an automatic counters reset
beyond. The default value is 'notInfinite'.rw Enumeration .1.3.6.1.4.1.866.20.10.10.1.2 |
fmsCtrlCountersCommandThe value of this object permits, when it is set
to 'reset', to re-initialize all the counters
except those in fmStatEthOutputTrafficTable,
fmStatEthInputTrafficTable and
fmStatEthManagementTable. The equipment answers
always with the value 'ready' to a GetRequest on
this object.rw Enumeration .1.3.6.1.4.1.866.20.10.10.1.3 |
fmsCtrlResetTimeThe value of this object is the value of sysUpTime
when the counters were re-initialized by a 'reset'
command (see fmsCtrlCountersCommand).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.20.10.10.1.4 |
fmStatGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.10 |
fmsGlobInitBuffCountThe value of this object is the total number of
the buffers created when initializing.ro Gauge .1.3.6.1.4.1.866.20.10.10.10.1 |
fmsGlobFreeBuffCountThe value of this object is the total number of
the free buffers.ro Gauge .1.3.6.1.4.1.866.20.10.10.10.2 |
fmsGlobCpuAThe value of this object is the maximum instant
load of the CPU A on all the modules.ro Gauge .1.3.6.1.4.1.866.20.10.10.10.3 |
fmsGlobCpuBThe value of this object is the maximum instant
load of the CPU B on all the modules.ro Gauge .1.3.6.1.4.1.866.20.10.10.10.4 |
fmsGlobVcInUseCountThe value of this object is the number of the
virtual circuits established.ro Gauge .1.3.6.1.4.1.866.20.10.10.10.5 |
fmsGlobGeneratorsInUseCountThe value of this object is the number of the busy
traffic generators.ro Gauge .1.3.6.1.4.1.866.20.10.10.10.6 |
fmsGlobCompressOctetGainThe value of this object is the total gain, in
volume (in bytes), generated by the
compression/scrambling function.ro Gauge .1.3.6.1.4.1.866.20.10.10.10.7 |
fmsGlobCompressBillGainThe value of this object is the total gain, in
billing (in segments), generated by the
compression/scrambling function.ro Gauge .1.3.6.1.4.1.866.20.10.10.10.8 |
fmsGlobLanCpuThe value of this object is the transputer CPU
load.ro Counter .1.3.6.1.4.1.866.20.10.10.10.9 |
fmsGlobCongCpuLostBlocksNb de blocs de 0 a N octets rejetes sur congestion
CPU (N = 160 en v2.1)ro Counter .1.3.6.1.4.1.866.20.10.10.10.10 |
fmsGlobCongRamLostBlocksNb de blocs de 0 a N octets rejetes sur congestion
memoire (N = 160 en v2.1)ro Counter .1.3.6.1.4.1.866.20.10.10.10.11 |
fmStatInputTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.11 |
fmsInputDataPktsCounterThe value of this object is the total number of
the data packets received by the internal switch
from the beginning of the collection period.ro Counter .1.3.6.1.4.1.866.20.10.10.11.1 |
fmsInputDataBytesCounterThe value of this object is the total number of
the data bytes received by the internal switch
from the beginning of the collection period.ro Counter .1.3.6.1.4.1.866.20.10.10.11.2 |
fmsInputIntrPktsCounterThe value of this object is the total number of
the interrupt packets received by the internal
switch from the beginning of the collection period.ro Counter .1.3.6.1.4.1.866.20.10.10.11.3 |
fmsInputReinitPktsCounterThe value of this object is the total number of
the reset packets received by the internal switch
from the beginning of the collection period.ro Counter .1.3.6.1.4.1.866.20.10.10.11.4 |
fmsInputCallPktsCounterThe value of this object is the total number of
the call packets received by the internal switch
from the beginning of the collection period.ro Counter .1.3.6.1.4.1.866.20.10.10.11.5 |
fmsInputCallConfPktsCounterThe value of this object is the total number of
the call confirmation received and successfully
processed by the internal switch from the
beginning of the collection period. This object is
therefore the number of the virtual circuits
established from the beginning of the collection
period.ro Counter .1.3.6.1.4.1.866.20.10.10.11.6 |
fmStatLineTableThis table contains the information about the
statistics by line. SEQUENCE OF FmStatLineEntry .1.3.6.1.4.1.866.20.10.10.12 |
fmStatLineEntryAn entry of fmStatLineTable. FmStatLineEntry .1.3.6.1.4.1.866.20.10.10.12.1 |
fmsLineIdThe value of this object is the one line
identifier.ro INTEGER .1.3.6.1.4.1.866.20.10.10.12.1.1 |
fmsLineStateThe value of this object is the state of this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.12.1.2 |
fmsLineLcInUseCountThe value of this object is the total number of
the busy logical channels.ro Gauge .1.3.6.1.4.1.866.20.10.10.12.1.3 |
fmsLineReinitsCounterThe value of this object is the total number of
the resets of this line from the beginning of the
collection period.ro Counter .1.3.6.1.4.1.866.20.10.10.12.1.4 |
fmsLineIncidentsCounterThe value of this object is the total number of
the incidents of this line from the beginning of
the collection period.ro INTEGER .1.3.6.1.4.1.866.20.10.10.12.1.5 |
fmsLineInputOctetsCounterThe value of this object is the total number of
the bytes received over this line from the
beginning of the collection period.ro Counter .1.3.6.1.4.1.866.20.10.10.12.1.6 |
fmsLineOutputOctetsCounterThe value of this object is the total number of
bytes sent over this line from the beginning of
the collection period.ro Counter .1.3.6.1.4.1.866.20.10.10.12.1.7 |
fmsLineTypeThe value of this object indicates the type of
this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.12.1.20 |
fmsLineTestStateThe value of this object indicates the test state
of this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.12.1.21 |
fmStatSignalTableThis table contains the information about the
lines signals. SEQUENCE OF FmStatSignalEntry .1.3.6.1.4.1.866.20.10.10.13 |
fmStatSignalEntryAn entry of fmStatSignalTable. FmStatSignalEntry .1.3.6.1.4.1.866.20.10.10.13.1 |
fmsSigPhysPortIdThe value of this object is the one physical line
identifier.ro INTEGER .1.3.6.1.4.1.866.20.10.10.13.1.1 |
fmsSigStateThe value of this object indictates the state of
this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.13.1.2 |
fmsSigDceOrDteThe value of this object indicates whether the
equipment is DTE or DCE for this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.13.1.3 |
fmsSig105The value of this object indicates the state of
the signal 105 on this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.13.1.4 |
fmsSig106The value of this object indicates the state of
the signal 106 on this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.13.1.5 |
fmsSig107The value of this object indicates the state of
the signal 107 on this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.13.1.6 |
fmsSig108The value of this object indicates the state of
the signal 108 on this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.13.1.7 |
fmsSig109The value of this object indicates the state of
the signal 109 on this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.13.1.8 |
fmsSig111The value of this object indicates the state of
the signal 111 on this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.13.1.9 |
fmsSig125The value of this object indicates the state of
the signal 125 on this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.13.1.10 |
fmsSig140The value of this object indicates the state of
the signal 140 on this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.13.1.11 |
fmsSig141The value of this object indicates the state of
the signal 141 on this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.13.1.12 |
fmsSig142The value of this object indicates the state of
the signal 142 on this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.13.1.13 |
fmsSigSynThe value of this object indicates the state of
the signal SYN on this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.13.1.14 |
fmStatLinesSummary OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.15 |
fmsLinesSummStateThis object indicates the state of each line of
the equipment with the following format,. each
line using three octets (i.e., 24 bits) :
bit 0 : physical level (0 = down, 1 = up),
bit 1: level 3 (0 = down, 1 = up),
bits 2 to 8 : protocol (1 = X25 synchronous, 2
= asynchronous, 4 = asynchronous SDLC, 6 =
asynchronous VIP character, 7 = BSC
Transparent character, 8 = asynchronous on
BSC 3270 or 2780/3780, 14 = ISDN D-Channel
with or without PLL, 15 = ISDN B-Channel
with signalling, 16 = ISDN B-Channel
without signalling, 19 = Frame Relay
transit or FR-TE, 20 = HDLC-T, 21 = Frame
Relay subscriber, FRA, 23 = Ethernet, 30 =
asynchronous X28+),
bits 9 to 20 : number of active logical
channels (0 to 4095),
bits 20 to 23 : unused.ro OCTET STRING .1.3.6.1.4.1.866.20.10.10.15.1 |
fmStatStateTableThis table contains the information about the type
and the state of the lines. SEQUENCE OF FmStatStateEntry .1.3.6.1.4.1.866.20.10.10.20 |
fmStatStateEntryAn entry of fmStatStateTable. FmStatStateEntry .1.3.6.1.4.1.866.20.10.10.20.1 |
fmsStateLineThe value of this object is the one line
identifier.ro INTEGER .1.3.6.1.4.1.866.20.10.10.20.1.1 |
fmsStateLineTypeThe value of this object indicates the type of
this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.20.1.2 |
fmsStateOsiStateThe value of this object indicates the state and
the ISO layer of this line. If this line is up,
the value indicated is the ISO layer.ro Enumeration .1.3.6.1.4.1.866.20.10.10.20.1.3 |
fmsStateTestStateThe value of this object indicates the test state
of this line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.20.1.4 |
fmsStateMlpTrunkMainLineThe value of this object indicates if this line is
the main line of a MLP trunk.ro Enumeration .1.3.6.1.4.1.866.20.10.10.20.1.5 |
fmsStateMlpTrunkNumberThe value of this object is the identifier of the
MLP trunk.ro INTEGER .1.3.6.1.4.1.866.20.10.10.20.1.6 |
fmsStateMlpTrunkStateThe value of this object is the MLP trunk state.ro Enumeration .1.3.6.1.4.1.866.20.10.10.20.1.7 |
fmStatMlpTableThis table contains the information about the MLP
trunks. SEQUENCE OF FmStatMlpEntry .1.3.6.1.4.1.866.20.10.10.30 |
fmStatMlpEntryAn entry of fmStatMlpTable. FmStatMlpEntry .1.3.6.1.4.1.866.20.10.10.30.1 |
fmsMlpTrunkNumberThe value of this object is the identifier of the
MLP trunk.ro INTEGER .1.3.6.1.4.1.866.20.10.10.30.1.1 |
fmsMlpLineIdThe value of this object is the one line
identifier.ro INTEGER .1.3.6.1.4.1.866.20.10.10.30.1.2 |
fmsMlpLineTypeThe value of this object indicates if this line is
the main line of this MLP trunk.ro Enumeration .1.3.6.1.4.1.866.20.10.10.30.1.3 |
fmStatEthernet OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.40 |
fmStatEthernetTableThis table contains the general information about
the Ethernet physical ports. SEQUENCE OF FmStatEthernetEntry .1.3.6.1.4.1.866.20.10.10.40.1 |
fmStatEthernetEntryAn entry of fmStatEthernetTable. FmStatEthernetEntry .1.3.6.1.4.1.866.20.10.10.40.1.1 |
fmsEthLineIdThe value of this object is the identifier of one
physical port.ro INTEGER .1.3.6.1.4.1.866.20.10.10.40.1.1.1 |
fmsEthPhysAddrThe value of this object is the MAC address of the
equipment.ro OCTET STRING .1.3.6.1.4.1.866.20.10.10.40.1.1.2 |
fmsEthOperStatusThe value of this object is the state of the LAN
function.ro Enumeration .1.3.6.1.4.1.866.20.10.10.40.1.1.3 |
fmsEthInterfaceThe value of this object is the ethernet connector
type.ro Enumeration .1.3.6.1.4.1.866.20.10.10.40.1.1.4 |
fmsEthAutoPortSelectionThe value of this object indicates whether the
selection of the LAN port is automatic or not.ro Enumeration .1.3.6.1.4.1.866.20.10.10.40.1.1.20 |
fmsEthPolarityCorrectionThe value of this object indicates the state of
the polarity spontaneous correction.ro Enumeration .1.3.6.1.4.1.866.20.10.10.40.1.1.21 |
fmsEthPolarityInversionThe value of this object indicates if there is
inversion of the polarity.ro Enumeration .1.3.6.1.4.1.866.20.10.10.40.1.1.22 |
fmsEthLinkIntegrityThe value of this object indicates the state of
the link integrity function.ro Enumeration .1.3.6.1.4.1.866.20.10.10.40.1.1.23 |
fmsEthTestLoopbackThe value of this object indicates if the loopback
test is used.ro Enumeration .1.3.6.1.4.1.866.20.10.10.40.1.1.24 |
fmsEthJabberThe value of this object is the state of the bus
taking time control function (Jabber).ro Enumeration .1.3.6.1.4.1.866.20.10.10.40.1.1.25 |
fmsEthTestModeThe value of this object is the mode of the test.
The value 'continousSending' indicates that frames
are sent continously during the test. The value
'standby' indicates that no frames are sent during
the test.ro Enumeration .1.3.6.1.4.1.866.20.10.10.40.1.1.26 |
fmsEthTdrStateThe value of this object (Time Domain
Reflectometry) indicates the problem type of the
connectors system.ro Enumeration .1.3.6.1.4.1.866.20.10.10.40.1.1.27 |
fmsEthTdrLocThe value of this object (Time Domain
Reflectometry) indicates the tracing of connectors
system problem. The value '2047' is not
significant.ro INTEGER .1.3.6.1.4.1.866.20.10.10.40.1.1.28 |
fmsEthUpTimeThe value of this object is the time elapsing
since the last start-up of the LAN interface. When
the equipment starts, the value of this object is
0.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.20.10.10.40.1.1.29 |
fmStatEthInputTrafficTableThis table contains the information about the
statistics, in reception, of a LAN line. The
values of all this counters are not reseted by the
command 'reset' of fmsCtrlCountersCommand. SEQUENCE OF FmStatEthInputTrafficEntry .1.3.6.1.4.1.866.20.10.10.40.2 |
fmStatEthInputTrafficEntryAn entry of fmStatEthInputTrafficTable. FmStatEthInputTrafficEntry .1.3.6.1.4.1.866.20.10.10.40.2.1 |
fmsEthInLineIdThe value of this object is the one line
identifier.ro INTEGER .1.3.6.1.4.1.866.20.10.10.40.2.1.1 |
fmsEthInOctetsCounterThe value of this object is the number of the
bytes received over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.2.1.2 |
fmsEthInPktsCounterThe value of this object is the number of the
frames received over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.2.1.3 |
fmsEthInNoErrCounterThe value of this object is the number of the
frames received with no error over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.2.1.4 |
fmsEthInUcastPktsCounterThe value of this object is the number of the
frames received over this line and correctly sent
to the upper layer.ro Counter .1.3.6.1.4.1.866.20.10.10.40.2.1.5 |
fmsEthInAlignmentErrorsCounterThe value of this object is the number of the
frames received with an error of alignment (number
of bits not multiple of 8) over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.2.1.20 |
fmsEthInFCSErrorsCounterThe value of this object is the number of the
frames received with an error of CRC over this
line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.2.1.21 |
fmsEthInPktsTooLongsCounterThe value of this object is the number of the
frames received with a length too long over this
line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.2.1.22 |
fmsEthInPktsTooShortsCounterThe value of this object is the number of the
frames received with a length too short over this
line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.2.1.23 |
fmsEthInErrOutOfResourcesCounterThe value of this object is the number of the
frames received with an error of resources too
short over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.2.1.24 |
fmsEthInErrDmaOverrunCounterThe value of this object is the number of the
frames received with the error 'DMA overrun' (no
reply when expected by the memory bus to a DMA
cycle) over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.2.1.25 |
fmsEthInErrCollCounterThe value of this object is the number of the
frames received with the error 'receive collision'
(frames received but invalided because of a
collision detection during the reception) over
this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.2.1.26 |
fmsEthInErrOverFlowCounterThe value of this object is the number of the
frames received over this line and not sent to the
upper layer because of the resources overflow.ro Counter .1.3.6.1.4.1.866.20.10.10.40.2.1.27 |
fmStatEthOutputTrafficTableThis table contains the information about the
statistics, in sending, of one LAN line. The
values of all this counters are not reseted by the
command 'reset' of fmsCtrlCountersCommand. SEQUENCE OF FmStatEthOutputTrafficEntry .1.3.6.1.4.1.866.20.10.10.40.3 |
fmStatEthOutputTrafficEntryAn entry of fmStatEthOutputTrafficTable. FmStatEthOutputTrafficEntry .1.3.6.1.4.1.866.20.10.10.40.3.1 |
fmsEthOutLineIdThe value of this object is the one line
identifier.ro INTEGER .1.3.6.1.4.1.866.20.10.10.40.3.1.1 |
fmsEthOutOctetsCounterThe value of this object is the number of the
bytes sent over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.3.1.2 |
fmsEthOutPktsCounterThe value of this object is the number of the
frames sent over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.3.1.3 |
fmsEthOutNoErrCounterThe value of this object is the number of the
frames sent without error over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.3.1.4 |
fmsEthOutSingleCollisionFramesCounterThe value of this object is the number of the
frames sent after one collision over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.3.1.5 |
fmsEthOutMultipleCollisionFramesCounterThe value of this object is the number of the
frames sent after two collisions or more over this
line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.3.1.6 |
fmsEthOutDeferredTransmissionsCounterThe value of this object is the number of the
frames sent late over this line because the
ethernet bus is busy.ro Counter .1.3.6.1.4.1.866.20.10.10.40.3.1.7 |
fmsEthOutSQETestErrorsCounterThe value of this object is the number of the
frames sent with error of no heartbeat over this
line. The heartbeat function of the ethernet
transmitter is used to indicate to the LAN driver
the status of its collision detector. If following
a transmission, the transmitter does not send the
SQE signal of the heartbeat function to the
equipment, then the frame is considered to be sent
with 'no heartbeat' error.ro Counter .1.3.6.1.4.1.866.20.10.10.40.3.1.20 |
fmsEthOutLateCollisionsCounterThe value of this object is the number of the
frames not sent because of the error 'late
collision' (collision detection after the end of
the slot time) over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.3.1.21 |
fmsEthOutExcessiveCollisionsCounterThe value of this object is the number of the
frames not sent because of the collisions
detections at all the attempts over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.3.1.22 |
fmsEthOutCarrierSenseErrorsCounterThe value of this object is the number of the
frames not sent because of the error 'no carrier
sense' over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.3.1.23 |
fmsEthOutErrExcdDelayCounterThe value of this object is the number of the
frames not sent over this line because the bus is
busy during a long time.ro Counter .1.3.6.1.4.1.866.20.10.10.40.3.1.24 |
fmsEthOutErrCtsLossCounterThe value of this object is the number of the
frames not sent over this line because of the loss
of the CTS (Clear To Send) signal.ro Counter .1.3.6.1.4.1.866.20.10.10.40.3.1.25 |
fmsEthOutErrDmaUnderrunCounterThe value of this object is the number of the
frames not sent over this line because of the
error 'DMA underrun' (no reply when expected by
the memory bus to a DMA cycle).ro Counter .1.3.6.1.4.1.866.20.10.10.40.3.1.26 |
fmStatEthManagementTableThis table contains the information about the
monitoring, the reset and the filtering for each
port. The values of all this counters are not
reseted by the command 'reset' of
fmsCtrlCountersCommand. SEQUENCE OF FmStatEthManagementEntry .1.3.6.1.4.1.866.20.10.10.40.4 |
fmStatEthManagementEntryAn entry of fmStatEthManagementTable. FmStatEthManagementEntry .1.3.6.1.4.1.866.20.10.10.40.4.1 |
fmsEthManLineIdThe value of this object is the one line
identifier.ro INTEGER .1.3.6.1.4.1.866.20.10.10.40.4.1.1 |
fmsEthManSupervisionOkCounterThe value of this object is the number of the OK
supervision frames over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.4.1.2 |
fmsEthManSupervisionNokCounterThe value of this object is the number of the not
OK supervision frames over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.4.1.3 |
fmsEthManInputResetCounterThe value of this object is the number of the
reception resets over this line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.4.1.4 |
fmsEthManFilterPermitCounterThe value of this object is the number of the
frames accepted by the bridge filtering over this
line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.4.1.5 |
fmsEthManFilterDenyCounterThe value of this object is the number of the
frames refused by the bridge filtering over this
line.ro Counter .1.3.6.1.4.1.866.20.10.10.40.4.1.6 |
fmStatWanConnectionsTableThis table contains the information about the WAN
connections. SEQUENCE OF FmStatWanConnectionsEntry .1.3.6.1.4.1.866.20.10.10.45 |
fmStatWanConnectionsEntryAn entry of fmStatWanConnectionsTable. FmStatWanConnectionsEntry .1.3.6.1.4.1.866.20.10.10.45.1 |
fmsWanConnIdThe value of this object is the one SLL (Switched
Logical Link) identifier.ro INTEGER .1.3.6.1.4.1.866.20.10.10.45.1.1 |
fmsWanConnRemoteAddrThe value of this object is the X121 address of
the remote equipment.ro OCTET STRING .1.3.6.1.4.1.866.20.10.10.45.1.2 |
fmsWanConnEncapsulationThe value of this object indicates the
encapsulation type over this SLL (Switched Logical
Link).ro Enumeration .1.3.6.1.4.1.866.20.10.10.45.1.3 |
fmsWanConnStatusThe value of this object is the state of this SLL
(Switched Logical Link).ro Enumeration .1.3.6.1.4.1.866.20.10.10.45.1.5 |
fmsWanConnGroupingThe value of this object indicates if the grouping
function is used over this SLL (Switched Logical
Link).ro Enumeration .1.3.6.1.4.1.866.20.10.10.45.1.6 |
fmsWanConnLocalSbNumberThe value of this object is the subscriber local
number AB (in the DNIC ZO AB plan) of the LAN
coupling function.ro INTEGER .1.3.6.1.4.1.866.20.10.10.45.1.7 |
fmsWanConnInPktsCounterThe value of this object is the number of frames
received over this SLL (Switched Logical Link).ro Counter .1.3.6.1.4.1.866.20.10.10.45.1.20 |
fmsWanConnInErrPktsCounterThe value of this object is the number of frames
lost because they are erroneous over this SLL
(Switched Logical Link).ro Counter .1.3.6.1.4.1.866.20.10.10.45.1.21 |
fmsWanConnInOctetsCounterThe value of this object is the number of bytes
received over this SLL (Switched Logical Link).ro Counter .1.3.6.1.4.1.866.20.10.10.45.1.22 |
fmsWanConnOutPktsCounterThe value of this object is the number of frames
sent over this SLL (Switched Logical Link).ro Counter .1.3.6.1.4.1.866.20.10.10.45.1.30 |
fmsWanConnOutOctetsCounterThe value of this object is the number of bytes
sent over this SLL (Switched Logical Link).ro Counter .1.3.6.1.4.1.866.20.10.10.45.1.31 |
fmStatRemoteVirtualPorts OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.46 |
fmStatRvpConnectionsTableThis table contains the information about the
remote virtual ports. SEQUENCE OF FmStatRvpConnectionsEntry .1.3.6.1.4.1.866.20.10.10.46.1 |
fmStatRvpConnectionsEntryAn entry of fmStatRvpConnectionsTable. FmStatRvpConnectionsEntry .1.3.6.1.4.1.866.20.10.10.46.1.1 |
fmsRvpConnRemoteAddrThe value of this object is the X121 address of
the remote equipment.ro OCTET STRING .1.3.6.1.4.1.866.20.10.10.46.1.1.2 |
fmsRvpConnEncapsulationThe value of this object indicates the
encapsulation type.ro Enumeration .1.3.6.1.4.1.866.20.10.10.46.1.1.3 |
fmsRvpConnIdThe value of this object is the one connection
identifier.ro INTEGER .1.3.6.1.4.1.866.20.10.10.46.1.1.4 |
fmsRvpConnStatusThe value of this object is the state of this
connection.ro Enumeration .1.3.6.1.4.1.866.20.10.10.46.1.1.5 |
fmsRvpConnGroupingThe value of this object indicates if the grouping
function is used.ro Enumeration .1.3.6.1.4.1.866.20.10.10.46.1.1.6 |
fmsRvpConnLocalSbNumberThe value of this object is the subscriber local
number AB (in the DNIC ZO AB plan) of this
connection.ro INTEGER .1.3.6.1.4.1.866.20.10.10.46.1.1.7 |
fmsRvpConnInPktsCounterThe value of this object is the number of frames
received over this connection.ro Counter .1.3.6.1.4.1.866.20.10.10.46.1.1.20 |
fmsRvpConnInErrPktsCounterThe value of this object is the number of frames
lost because they are erroneous over this
connection.ro Counter .1.3.6.1.4.1.866.20.10.10.46.1.1.21 |
fmsRvpConnInOctetsCounterThe value of this object is the number of bytes
received over this connection.ro Counter .1.3.6.1.4.1.866.20.10.10.46.1.1.22 |
fmsRvpConnOutPktsCounterThe value of this object is the number of frames
sent over this connection.ro Counter .1.3.6.1.4.1.866.20.10.10.46.1.1.30 |
fmsRvpConnOutOctetsCounterThe value of this object is the number of bytes
sent over this connection.ro Counter .1.3.6.1.4.1.866.20.10.10.46.1.1.31 |
fmStatBridge OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.50 |
fmsBridgeStateThe value of this object is the state of the
bridging function.ro Enumeration .1.3.6.1.4.1.866.20.10.10.50.1 |
fmStatBrdgTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.50.18 |
fmsBrdgTrafInPktsCounterThe value of this object is the number of the
frames received by the bridge.ro Counter .1.3.6.1.4.1.866.20.10.10.50.18.1 |
fmsBrdgTrafOutPktsCounterThe value of this object is the number of the
frames sent by the bridge.ro Counter .1.3.6.1.4.1.866.20.10.10.50.18.20 |
fmsBrdgTrafOutBroadcastPktsCounterThe value of this object is the number of the data
frames diffusions.ro Counter .1.3.6.1.4.1.866.20.10.10.50.18.21 |
fmsBrdgTrafInServCounterThe value of this object is the number of the RIL
service frames received by the bridge.ro Counter .1.3.6.1.4.1.866.20.10.10.50.18.50 |
fmsBrdgTrafOutServCounterThe value of this object is the number of the RIL
service frames sent by the bridge.ro Counter .1.3.6.1.4.1.866.20.10.10.50.18.51 |
fmsBrdgTrafOutBroadcastServCounterThe value of this object is the number of the
service frames diffusions.ro Counter .1.3.6.1.4.1.866.20.10.10.50.18.52 |
fmStatIpRouter OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.51 |
fmsIpRouterStateThe value of this object is the state of the IP
routing function.ro Enumeration .1.3.6.1.4.1.866.20.10.10.51.1 |
fmStatIpTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.51.18 |
fmsIpTrafInReceivesCounterThe value of this object is the number of the IP
datagrams received.ro Counter .1.3.6.1.4.1.866.20.10.10.51.18.1 |
fmsIpTrafOutRequestsCounterThe value of this object is the number of the IP
datagrams sent.ro Counter .1.3.6.1.4.1.866.20.10.10.51.18.2 |
fmsIpTrafInOctetsCounterThe value of this object is the number of the
bytes received with the IP protocol.ro Counter .1.3.6.1.4.1.866.20.10.10.51.18.3 |
fmsIpTrafOutOctetsCounterThe value of this object is the number of the
bytes sent with the IP protocol.ro Counter .1.3.6.1.4.1.866.20.10.10.51.18.4 |
fmsIpTrafInUnknownProtosCounterThe value of this object is the number of the IP
datagrams received and lost because of an unknown
protocol.ro Counter .1.3.6.1.4.1.866.20.10.10.51.18.5 |
fmsIpTrafNoRoutesCounterThe value of this object is the number of the IP
datagrams received and lost because of an
impossible routing.ro Counter .1.3.6.1.4.1.866.20.10.10.51.18.6 |
fmsIpTrafInHdrErrorsCounterThe value of this object is the number of the IP
datagrams received and lost because they are
erroneous.ro Counter .1.3.6.1.4.1.866.20.10.10.51.18.7 |
fmsIpTrafOutForwDatagramsCounterThe value of this object is the number of the IP
datagrams received and correctly routed.ro Counter .1.3.6.1.4.1.866.20.10.10.51.18.8 |
fmsIpTrafOutForwDefRouteCounterThe value of this object is the number of the IP
datagrams received and routed on the default route.ro Counter .1.3.6.1.4.1.866.20.10.10.51.18.9 |
fmsIpTrafIcmpOutMsgsCounterThe value of this object is the number of the ICMP
datagrams sent.ro Counter .1.3.6.1.4.1.866.20.10.10.51.18.10 |
fmsIpTrafIcmpInMsgsCounterThe value of this object is the number of the ICMP
datagrams received.ro Counter .1.3.6.1.4.1.866.20.10.10.51.18.11 |
fmStatIpLanTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.51.19 |
fmsIpLanIpAddrfmStatIpLanTraffic 0
The value of this object is the IP address of the
LAN interface.ro IpAddress .1.3.6.1.4.1.866.20.10.10.51.19.1 |
fmsIpLanNetMaskThe value of this object is the sub-network mask
of the LAN interface.ro IpAddress .1.3.6.1.4.1.866.20.10.10.51.19.2 |
fmsIpLanOutRequestsCounterThe value of this object is the number of the IP
datagrams sent on the LAN interface.ro Counter .1.3.6.1.4.1.866.20.10.10.51.19.3 |
fmsIpLanInReceivesCounterThe value of this object is the number of the IP
datagrams received on the LAN interface.ro Counter .1.3.6.1.4.1.866.20.10.10.51.19.4 |
fmsIpLanOutOctetsIpCounterThe value of this object is the number of the
bytes sent with the IP protocol on the LAN
interface.ro Counter .1.3.6.1.4.1.866.20.10.10.51.19.5 |
fmsIpLanInOctetsIpCounterThe value of this object is the number of the
bytes received with the IP protocol on the LAN
interface.ro Counter .1.3.6.1.4.1.866.20.10.10.51.19.6 |
fmsIpLanNoRoutesCounterThe value of this object is the number of the IP
datagrams received and lost because of impossible
routing, on the LAN interface.ro Counter .1.3.6.1.4.1.866.20.10.10.51.19.7 |
fmsIpLanInHdrErrorsCounterThe value of this object is the number of the IP
datagrams received and lost because of they are
erroneous, on the LAN interface.ro Counter .1.3.6.1.4.1.866.20.10.10.51.19.8 |
fmsIpLanArpFailedCounterThe value of this object is the number of the not
solved ARP request, on the LAN interface.ro Counter .1.3.6.1.4.1.866.20.10.10.51.19.9 |
fmStatIpClusterStateTable SEQUENCE OF FmStatIpClusterStateEntry .1.3.6.1.4.1.866.20.10.10.51.25 |
fmStatIpClusterStateEntryAn entry of fmStatIpClusterStateTable. FmStatIpClusterStateEntry .1.3.6.1.4.1.866.20.10.10.51.25.1 |
fmsIpCluVpIdVP idro INTEGER .1.3.6.1.4.1.866.20.10.10.51.25.1.1 |
fmsIpCluClusterNumberCluster numberro INTEGER .1.3.6.1.4.1.866.20.10.10.51.25.1.2 |
fmsIpCluVirtualIpAddressVirtual IP Addressro IpAddress .1.3.6.1.4.1.866.20.10.10.51.25.1.3 |
fmsIpCluOperStatusOperation Statero Enumeration .1.3.6.1.4.1.866.20.10.10.51.25.1.4 |
fmsIpCluAdminStatusAdministration Staterw Enumeration .1.3.6.1.4.1.866.20.10.10.51.25.1.5 |
fmsIpCluLastChangeTime from the Last Changero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.20.10.10.51.25.1.6 |
fmStatFrameRelay OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.60 |
fmsFrSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.60.1 |
fmsFrSwDataLinkConnEstablishedNb de connexions FR etablis (svc-svc, pvc-svc,
proto-svc).ro Gauge .1.3.6.1.4.1.866.20.10.10.60.1.1 |
fmsFrSwBookingInputThrouhputDebit reserve (somme des CIR abonnes vers reseau).ro Gauge .1.3.6.1.4.1.866.20.10.10.60.1.10 |
fmsFrSwOverBookingThrouhputDebit reserve par les SVC en surbooking.ro Gauge .1.3.6.1.4.1.866.20.10.10.60.1.12 |
fmsFrLogicalPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.60.2 |
fmsFrLpLogPortTable SEQUENCE OF FmsFrLpLogPortEntry .1.3.6.1.4.1.866.20.10.10.60.2.1 |
fmsFrLpLogPortEntryAn entry of fmsFrLpLogPortTable. FmsFrLpLogPortEntry .1.3.6.1.4.1.866.20.10.10.60.2.1.1 |
fmsFrLpLogPortIdLP id.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.2.1.1.1 |
fmsFrLpInterfaceTypeType.ro Enumeration .1.3.6.1.4.1.866.20.10.10.60.2.1.1.3 |
fmsFrLpNumPlanThe value of this object identifies the network
address numbering plan for this logical port. The
network address is the object ifPhysAddress. The
value none implies that there is no ifPhysAddress.
The SNMP agent will return an octet string of zero
length for ifPhysAddress. The value other means
that an address has been assigned to this
interface, but the numbering plan is not
enumerated here.ro Enumeration .1.3.6.1.4.1.866.20.10.10.60.2.1.1.11 |
fmsFrLpAddrDlciLenThe value of this object identifies the Q.922
Address field length and DLCI length for this
logical port.ro Enumeration .1.3.6.1.4.1.866.20.10.10.60.2.1.1.15 |
fmsFrLpVcSigProtocolThe value of this object identifies the Local
In-Channel Signaling Protocol that is used for
this frame relay logical port.ro Enumeration .1.3.6.1.4.1.866.20.10.10.60.2.1.1.16 |
fmsFrLpIncomingTable SEQUENCE OF FmsFrLpIncomingEntry .1.3.6.1.4.1.866.20.10.10.60.2.2 |
fmsFrLpIncomingEntryAn entry of fmsFrLpIncomingTable. FmsFrLpIncomingEntry .1.3.6.1.4.1.866.20.10.10.60.2.2.1 |
fmsFrLpInLogPortIdLP id.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.2.2.1.1 |
fmsFrLpInOctetsThe number of received octets. This counter only
counts octets from the beginning of the frame
relay header field to the end of user data.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.2.1.2 |
fmsFrLpInFramesThe number of received unerrored, unicast frames.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.2.1.3 |
fmsFrLpInErrorsThe number of received frames that are discarded,
because of an error. Possible errors can be the
following: the frame relay frames were too long or
were too short.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.2.1.4 |
fmsFrLpInFrHeaderErrorsThe number of received frames that are discarded,
because of an error. Possible errors can be the
following: the frames had an invalid or
unrecognized DLCI values, or incorrect header
values.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.2.1.5 |
fmsFrLpInFecnFramesNumber of frames received indicating forward
congestion.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.2.1.10 |
fmsFrLpInBecnFramesNumber of frames received indicating backward
congestion.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.2.1.12 |
fmsFrLpInExcessFramesOnly on FR-CE or FR-TE logical ports : The number
of frames received by the equipment (ingress) for
this logical port which were treated as excess
traffic. Frames which are sent to the equipment
with DE set to zero are treated as excess when
more than Bc bits are submitted to the equipment
during the Committed Information Rate Measurement
Interval (Tc). Excess traffic may or may not be
discarded at the ingress if more than Bc + Be bits
are submitted to the equipment during Tc. Traffic
discarded at the ingress is not recorded in this
object. Frames which are sent to the equipement
with DE set to one are also treated as excess
traffic.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.2.1.15 |
fmsFrLpInDiscardsOnly on FR-CE or FR-TE logical ports : The number
of frames received by the equipment (ingress) that
were discarded due to traffic enforcement for this
logical port.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.2.1.16 |
fmsFrLpOutgoingTable SEQUENCE OF FmsFrLpOutgoingEntry .1.3.6.1.4.1.866.20.10.10.60.2.3 |
fmsFrLpOutgoingEntryAn entry of fmsFrLpOutgoingTable. FmsFrLpOutgoingEntry .1.3.6.1.4.1.866.20.10.10.60.2.3.1 |
fmsFrLpOutLogPortIdLP id.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.2.3.1.1 |
fmsFrLpOutOctetsThe number of transmitted octets. This counter
only counts octets from the beginning of the frame
relay header field to the end of user data.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.3.1.2 |
fmsFrLpOutFramesThe number of frames sent.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.3.1.3 |
fmsFrLpOutFecnFramesNumber of frames sent indicating forward
congestion.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.3.1.10 |
fmsFrLpOutLocalCongFecnFramesNumber of frames sent indicating forward
congestion due to traffic enforcement on this
logical port.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.3.1.11 |
fmsFrLpOutBecnFramesNumber of frames sent indicating backward
congestion.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.3.1.12 |
fmsFrLpOutLocalCongBecnFramesNumber of frames sent indicating backward
congestion due to traffic enforcement on the
incoming logical port.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.3.1.13 |
fmsFrLpOutLocalCongDiscardsThe number of frames not sent by the equipment
(egress) due to traffic enforcement on this
logical port.ro Counter .1.3.6.1.4.1.866.20.10.10.60.2.3.1.15 |
fmsFrLpLmiTable SEQUENCE OF FmsFrLpLmiEntry .1.3.6.1.4.1.866.20.10.10.60.2.4 |
fmsFrLpLmiEntryAn entry of fmsFrLpLmiTable. FmsFrLpLmiEntry .1.3.6.1.4.1.866.20.10.10.60.2.4.1 |
fmsFrLpLmiLogPortIdLP id.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.2.4.1.1 |
fmsFrLpLmiProcedThe value of this object identifies the Local
In-Channel Signaling Procedure that is used for
this logical port. The logical port can be
performing user-to-network network-side
procedures, bidirectional procedures or
user-to-network user-side procedures.ro Enumeration .1.3.6.1.4.1.866.20.10.10.60.2.4.1.11 |
fmsFrLpLmiUserN391The value of this object identifies the User-side
N391 full status polling cycle value for this
logical port. If the logical port is not
performing user-side procedures, then this value
is not significant. This object applies to Q.933
Annex A and T1.617 Annex D.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.2.4.1.12 |
fmsFrLpLmiUserN392The value of this object identifies the User-side
N392 error threshold value for this logical port.
If the logical port is not performing user-side
procedures, then this value is not significant.
This object applies to Q.933 Annex A and T1.617
Annex D.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.2.4.1.13 |
fmsFrLpLmiUserN393The value of this object identifies the User-side
N393 monitored events count value for this logical
port. If the logical port is not performing
user-side procedures, then this value is not
significant. This object applies to Q.933 Annex A
and T1.617 Annex D.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.2.4.1.14 |
fmsFrLpLmiUserT391The value of this object identifies the User-side
T391 link integrity verification polling timer
value for this logical port. If the logical port
is not performing user-side procedures, then this
value is not significant. This object applies to
Q.933 Annex A and T1.617 Annex D.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.2.4.1.15 |
fmsFrLpLmiNetN392The value of this object identifies the
Network-side N392 error threshold value (nN2 for
LMI) for this logical port. If the logical port is
not performing network-side procedures, then this
value is not significant. This object applies to
Q.933 Annex A, T1.617 Annex D and LMI.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.2.4.1.16 |
fmsFrLpLmiNetN393The value of this object identifies the
Network-side N393 monitored events count value
(nN3 for LMI) for this logical port. If the
logical port is not performing network-side
procedures, then this value is not significant.
This object applies to Q.933 Annex A, T1.617 Annex
D and LMI.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.2.4.1.17 |
fmsFrLpLmiNetT392The value of this object identifies the
Network-side T392 polling verification timer value
(nT2 for LMI) for this logical port. If the
logical port is not performing network-side
procedures, then this value is not significant.
This object applies to Q.933 Annex A, T1.617 Annex
D and LMI.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.2.4.1.18 |
fmsFrLpLmiUserLinkRelErrorsVCSigUserLinkRelErrorsro Counter .1.3.6.1.4.1.866.20.10.10.60.2.4.1.21 |
fmsFrLpLmiUserProtErrorsVCSigUserProtErrorsro Counter .1.3.6.1.4.1.866.20.10.10.60.2.4.1.22 |
fmsFrLpLmiUserChanInactiveVCSigUserChanInactivero Counter .1.3.6.1.4.1.866.20.10.10.60.2.4.1.23 |
fmsFrLpLmiNetLinkRelErrorsVCSigNetLinkRelErrorsro Counter .1.3.6.1.4.1.866.20.10.10.60.2.4.1.24 |
fmsFrLpLmiNetProtErrorsVCSigNetProtErrorsro Counter .1.3.6.1.4.1.866.20.10.10.60.2.4.1.25 |
fmsFrLpLmiNetChanInactiveVCSigNetChanInactiveErrorsro Counter .1.3.6.1.4.1.866.20.10.10.60.2.4.1.26 |
fmsFrLpSvcSignallingTable SEQUENCE OF FmsFrLpSvcSignallingEntry .1.3.6.1.4.1.866.20.10.10.60.2.5 |
fmsFrLpSvcSignallingEntryAn entry of fmsFrLpSvcSignallingTable. FmsFrLpSvcSignallingEntry .1.3.6.1.4.1.866.20.10.10.60.2.5.1 |
fmsFrLpSvcLogPortIdLP id.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.2.5.1.1 |
fmsFrLpSvcDlcInitializedNb de Data Link Connexion correctement initialises.ro Gauge .1.3.6.1.4.1.866.20.10.10.60.2.5.1.11 |
fmsFrLpSvcDlcUbrNb de DLC UBR etablies.ro Gauge .1.3.6.1.4.1.866.20.10.10.60.2.5.1.12 |
fmsFrLpSvcDlcVbrNb de DLC VBR etablies.ro Gauge .1.3.6.1.4.1.866.20.10.10.60.2.5.1.13 |
fmsFrLpSvcDlcVbrRtNb de DLC VBR-RT etablies.ro Gauge .1.3.6.1.4.1.866.20.10.10.60.2.5.1.14 |
fmsFrLpSvcBookingVbrThroughputDebit reserve VBR (en octets/s).ro Gauge .1.3.6.1.4.1.866.20.10.10.60.2.5.1.20 |
fmsFrLpSvcBookingVbrRtThroughputDebit reserve VBR-RT (en octets/s).ro Gauge .1.3.6.1.4.1.866.20.10.10.60.2.5.1.21 |
fmsFrLpSvcOverBookingThroughputDebit total avec surbooking (en octets/s).ro Gauge .1.3.6.1.4.1.866.20.10.10.60.2.5.1.22 |
fmsFrLpSvcBookingRateTaux de reservation.ro Gauge .1.3.6.1.4.1.866.20.10.10.60.2.5.1.23 |
fmsFrDataLinkConnection OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.60.3 |
fmsFrDlcTable SEQUENCE OF FmsFrDlcEntry .1.3.6.1.4.1.866.20.10.10.60.3.1 |
fmsFrDlcEntryAn entry of fmsFrDlcTable. FmsFrDlcEntry .1.3.6.1.4.1.866.20.10.10.60.3.1.1 |
fmsFrDlcLogPortIdLP Id.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.3.1.1.1 |
fmsFrDlcDlciDLCI.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.3.1.1.2 |
fmsFrDlcStateIndicates whether the particular virtual circuit
is operational.ro Enumeration .1.3.6.1.4.1.866.20.10.10.60.3.1.1.5 |
fmsFrDlcRcvdSigStatusPVC end point received statusro Enumeration .1.3.6.1.4.1.866.20.10.10.60.3.1.1.7 |
fmsFrDlcCosCOS.ro Enumeration .1.3.6.1.4.1.866.20.10.10.60.3.1.1.10 |
fmsFrDlcIncomingTable SEQUENCE OF FmsFrDlcIncomingEntry .1.3.6.1.4.1.866.20.10.10.60.3.2 |
fmsFrDlcIncomingEntryAn entry of fmsFrDlcIncomingTable. FmsFrDlcIncomingEntry .1.3.6.1.4.1.866.20.10.10.60.3.2.1 |
fmsFrDlcInLogPortIdLP Id.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.3.2.1.1 |
fmsFrDlcInDlciThe value of this object is equal to the DLCI
value for this Data Link Connection.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.3.2.1.2 |
fmsFrDlcInFramesThe number of frames received by the equipment
(ingress) for this Data Link Connection. This
includes any frames discarded by the equipment due
to submitting more than Bc + Be data or due to any
network congestion recovery procedure.ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.2.1.10 |
fmsFrDlcInOctetsThe number of octets received by the equipment
(ingress) for this Data Link Connection. This
counter only counts octets from the beginning of
the frame relay header field to the end of user
data.ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.2.1.11 |
fmsFrDlcInDeFramesThe number of frames received by the equipment
(ingress) with the DE bit set to (1) for this Data
Link Connection.ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.2.1.12 |
fmsFrDlcInFecnFramesNumber of frames received by the equipment
indicating forward congestion for this Data Link
Connection.ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.2.1.13 |
fmsFrDlcInBecnFramesNumber of frames received by the equipment
indicating backward congestion for this Data Link
Connectionro Counter .1.3.6.1.4.1.866.20.10.10.60.3.2.1.14 |
fmsFrDlcInExcessFramesThe number of frames received by the equipment
(ingress) for this Data Link Connection which were
treated as excess traffic. Frames which are sent
to the equipment with DE set to zero are treated
as excess when more than Bc bits are submitted to
the network during the Committed Information Rate
Measurement Interval (Tc). Excess traffic may or
may not be discarded at the ingress if more than
Bc + Be bits are submitted to the equipment during
Tc. Traffic discarded at the ingress is not
recorded in this object. Frames which are sent to
the equipment with DE set to one are also treated
as excess traffic.ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.2.1.15 |
fmsFrDlcInDiscardsThe number of frames received by the equipment
(ingress) that were discarded due to traffic
enforcement for this Data Link Connection.ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.2.1.16 |
fmsFrDlcInLostFramesNb de trames perdues dans le reseau (evalue par le
mecanisme de segmentation / reassemblage).ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.2.1.30 |
fmsFrDlcInLostSegmentsNb de segments perdus dans le reseau (evalue par
le mecanisme de segmentation / reassemblage).ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.2.1.31 |
fmsFrDlcOutgoingTable SEQUENCE OF FmsFrDlcOutgoingEntry .1.3.6.1.4.1.866.20.10.10.60.3.3 |
fmsFrDlcOutgoingEntryAn entry of fmsFrDlcOutgoingTable. FmsFrDlcOutgoingEntry .1.3.6.1.4.1.866.20.10.10.60.3.3.1 |
fmsFrDlcOutLogPortIdLP Id.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.3.3.1.1 |
fmsFrDlcOutDlciThe value of this object is equal to the DLCI
value for this Data Link Connection.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.3.3.1.2 |
fmsFrDlcOutFramesThe number of frames sent by the equipment
(egress) regardless of whether they are Bc or Be
frames for this Data Link Connection.ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.3.1.10 |
fmsFrDlcOutOctetsThe number of octets sent by the equipment
(egress) for this Data Link Connection. This
counter only counts octets from the beginning of
the frame relay header field to the end of user
data.ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.3.1.11 |
fmsFrDlcOutFecnFramesNumber of frames sent by the equipment indicating
forward congestion for this Data Link Connection.ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.3.1.13 |
fmsFrDlcOutBecnFramesNumber of frames sent by the equipment indicating
backward congestion for this Data Link Connection.ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.3.1.14 |
fmsFrDlcOutExcessFramesThe number of frames sent by the equipment
(egress) for this Data Link Connection which were
treated as excess traffic. (The DE bit may be set
to one.).ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.3.1.15 |
fmsFrDlcOutDiscardsNumber of frames not sent by the equipment due to
congestion for this Data Link Connection.ro Counter .1.3.6.1.4.1.866.20.10.10.60.3.3.1.16 |
fmStatFrLineTableThis table contains the information about the
Frame Relay lines. SEQUENCE OF FmStatFrLineEntry .1.3.6.1.4.1.866.20.10.10.60.20 |
fmStatFrLineEntryAn entry of fmStatFrLineTable. FmStatFrLineEntry .1.3.6.1.4.1.866.20.10.10.60.20.1 |
fmsFrLineIdThe value of this object is the one physical line
identifier.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.20.1.1 |
fmsFrLineStatusThe value of this object indicates the state of
this physical line.ro Enumeration .1.3.6.1.4.1.866.20.10.10.60.20.1.2 |
fmsFrLineLmiStatusThe value of this object indicates the LMI state.ro Enumeration .1.3.6.1.4.1.866.20.10.10.60.20.1.3 |
fmsFrLineCircuitCountThe value of this object indicates the total
number of the DLCI on this physical line.ro Gauge .1.3.6.1.4.1.866.20.10.10.60.20.1.4 |
fmsFrLineActiveCircuitCountThe value of this objects is the number of active
DLCI on this physical line.ro Gauge .1.3.6.1.4.1.866.20.10.10.60.20.1.5 |
fmStatFrCircuitTableThis table contains the information about each
circuit. SEQUENCE OF FmStatFrCircuitEntry .1.3.6.1.4.1.866.20.10.10.60.21 |
fmStatFrCircuitEntryAn entry of fmStatFrCircuitTable. FmStatFrCircuitEntry .1.3.6.1.4.1.866.20.10.10.60.21.1 |
fmsFrCircuitLineIdThe value of this object is the one physical line
identifier.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.21.1.1 |
fmsFrCircuitDlciThe value of this object is the identifier of one
circuit. It is the DLCI.ro INTEGER .1.3.6.1.4.1.866.20.10.10.60.21.1.2 |
fmsFrCircuitStatusThe value of this object is the state of this
circuit.ro Enumeration .1.3.6.1.4.1.866.20.10.10.60.21.1.3 |
fmsFrCircuitAgeThe value of this object indicates the age of this
circuit.ro Enumeration .1.3.6.1.4.1.866.20.10.10.60.21.1.4 |
fmsFrCircuitOutOctetsCounterThe value of this object is the number of octets
sent on this circuit.ro Counter .1.3.6.1.4.1.866.20.10.10.60.21.1.5 |
fmsFrCircuitInOctetsCounterThe value of this object is the number of octets
received on this circuit.ro Counter .1.3.6.1.4.1.866.20.10.10.60.21.1.6 |
fmsFrCommIdentification OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.60.30 |
fmsFrCommStorageTableThis table contains SEQUENCE OF FmsFrCommStorageEntry .1.3.6.1.4.1.866.20.10.10.60.30.1 |
fmsFrCommStorageEntryAn entry of fmsFrCommStorageTable. FmsFrCommStorageEntry .1.3.6.1.4.1.866.20.10.10.60.30.1.1 |
fmsFrcStoragePhysIfIdInterface physiquero INTEGER .1.3.6.1.4.1.866.20.10.10.60.30.1.1.1 |
fmsFrcStorageChannelIdChannel IDro INTEGER .1.3.6.1.4.1.866.20.10.10.60.30.1.1.2 |
fmsFrcStorageDlciDLCIro INTEGER .1.3.6.1.4.1.866.20.10.10.60.30.1.1.3 |
fmsFrcStorageSubDlciChannelro INTEGER .1.3.6.1.4.1.866.20.10.10.60.30.1.1.4 |
fmsFrcStorageTypeOfDlciType de DLCIro Enumeration .1.3.6.1.4.1.866.20.10.10.60.30.1.1.5 |
fmsFrcStorageDirectionDirectionro OCTET STRING .1.3.6.1.4.1.866.20.10.10.60.30.1.1.6 |
fmsFrcStorageTypeOfTransportType de transportro Enumeration .1.3.6.1.4.1.866.20.10.10.60.30.1.1.7 |
fmsFrcStoragePvcStatusPVC Statusro Enumeration .1.3.6.1.4.1.866.20.10.10.60.30.1.1.8 |
fmsFrcStorageDestAddrDestinatairero OCTET STRING .1.3.6.1.4.1.866.20.10.10.60.30.1.1.9 |
fmsFrcStorageSrcAddrAdresse sourcero OCTET STRING .1.3.6.1.4.1.866.20.10.10.60.30.1.1.10 |
fmsFrcStorageCosCOSro Enumeration .1.3.6.1.4.1.866.20.10.10.60.30.1.1.11 |
fmsFrcStorageCirCIRro INTEGER .1.3.6.1.4.1.866.20.10.10.60.30.1.1.12 |
fmsFrcStorageMinCirCIR Minro INTEGER .1.3.6.1.4.1.866.20.10.10.60.30.1.1.13 |
fmsFrcStorageBcBCro INTEGER .1.3.6.1.4.1.866.20.10.10.60.30.1.1.14 |
fmsFrcStorageBeBEro INTEGER .1.3.6.1.4.1.866.20.10.10.60.30.1.1.15 |
fmsFrCommFilter OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.60.30.2 |
fmsFrcFilterPhysIfIdInterface physiquerw DisplayString .1.3.6.1.4.1.866.20.10.10.60.30.2.1 |
fmsFrcFilterChannelIdChannel IDrw DisplayString .1.3.6.1.4.1.866.20.10.10.60.30.2.2 |
fmsFrcFilterDlciDLCIrw DisplayString .1.3.6.1.4.1.866.20.10.10.60.30.2.3 |
fmsFrcFilterActionActionrw Enumeration .1.3.6.1.4.1.866.20.10.10.60.30.2.4 |
fmStatPointToPointProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.71 |
fmStatPppPhysLineTableThis table contains the general information about
PPP lines. SEQUENCE OF FmStatPppPhysLineEntry .1.3.6.1.4.1.866.20.10.10.71.1 |
fmStatPppPhysLineEntryAn entry of fmStatPppPhysLineTable. FmStatPppPhysLineEntry .1.3.6.1.4.1.866.20.10.10.71.1.1 |
fmsPppPhysLineIdThe value of this object is the one physical port
identifier.ro INTEGER .1.3.6.1.4.1.866.20.10.10.71.1.1.1 |
fmsPppPhysLocalMruThe value of this object is the current value of
the MRU (Maximum Receive Unit) for the local PPP
entity. This value is the MRU that the remote
entity is using when sending packets to the local
PPP entity. The value of this object is meaningful
only when the link has reached the open state
(ifOperStatus is up).ro INTEGER .1.3.6.1.4.1.866.20.10.10.71.1.1.2 |
fmsPppPhysRemoteMruThe value of this object is the current value of
the MRU (Maximum Receive Unit) for the remote PPP
entity. This value is the MRU that the local
entity is using when sending packets to the remote
PPP entity. The value of this object is meaningful
only when the link has reached the open state
(ifOperStatus is up).ro INTEGER .1.3.6.1.4.1.866.20.10.10.71.1.1.3 |
fmsPppPhysMagicNumberThe value of this object indicates the magic
number state. If 'used' then the local node will
attempt to perform Magic Number negotiation with
the remote node. If 'notUsed' then this
negotiation is not performed. In any event, the
local node will comply with any magic number
negotiations attempted by the remote node, per the
PPP specification. Changing this object will have
an effect when the link is next restarted.ro Enumeration .1.3.6.1.4.1.866.20.10.10.71.1.1.4 |
fmStatPppProtocolStatusTableThis table contains the information about the
protocol layers (LCP and NCP level) for each PPP
line. SEQUENCE OF FmStatPppProtocolStatusEntry .1.3.6.1.4.1.866.20.10.10.71.2 |
fmStatPppProtocolStatusEntryAn entry of fmStatPppProtocolStatusTable. FmStatPppProtocolStatusEntry .1.3.6.1.4.1.866.20.10.10.71.2.1 |
fmsPppProtoLineIdThe value of this object is the one PPP line
identifier.ro INTEGER .1.3.6.1.4.1.866.20.10.10.71.2.1.1 |
fmsPppProtoLcpStatusThe value of this object is the current state of
the LCP layer.ro Enumeration .1.3.6.1.4.1.866.20.10.10.71.2.1.2 |
fmsPppProtoLcpDiagThe value of this object is the LCP layer
diagnostic report.ro Enumeration .1.3.6.1.4.1.866.20.10.10.71.2.1.3 |
fmsPppProtoIpNcpStatusThe value of this object is the current state of
the IP NCP layer.ro Enumeration .1.3.6.1.4.1.866.20.10.10.71.2.1.4 |
fmsPppProtoIpNcpDiagThe value of this object is the IP NCP layer
diagnostic report.ro Enumeration .1.3.6.1.4.1.866.20.10.10.71.2.1.5 |
fmsPppProtoBrdgNcpStatusThe value of this object is the current state of
the Bridge NCP layer.ro Enumeration .1.3.6.1.4.1.866.20.10.10.71.2.1.6 |
fmsPppProtoBrdgNcpDiagThe value of this object is the Bridge NCP layer
diagnostic report.ro Enumeration .1.3.6.1.4.1.866.20.10.10.71.2.1.7 |
fmsPppProtoIpxNcpStatusThe value of this object is the current state of
the IPX NCP layer.ro Enumeration .1.3.6.1.4.1.866.20.10.10.71.2.1.8 |
fmsPppProtoIpxNcpDiagThe value of this object is the IPX NCP layer
diagnostic report.ro Enumeration .1.3.6.1.4.1.866.20.10.10.71.2.1.9 |
fmsPppProtoClnpNcpStatusThe value of this object is the current state of
the CLNP NCP layer.ro Enumeration .1.3.6.1.4.1.866.20.10.10.71.2.1.10 |
fmsPppProtoClnpNcpDiagThe value of this object is the CLNP NCP layer
diagnostic report.ro Enumeration .1.3.6.1.4.1.866.20.10.10.71.2.1.11 |
fmStatPppAuthenticationTable SEQUENCE OF FmStatPppAuthenticationEntry .1.3.6.1.4.1.866.20.10.10.71.10 |
fmStatPppAuthenticationEntryAn entry of fmStatPppAuthenticationTable. FmStatPppAuthenticationEntry .1.3.6.1.4.1.866.20.10.10.71.10.1 |
fmsPppAuthLineIdNumero de la ligne PPP.ro INTEGER .1.3.6.1.4.1.866.20.10.10.71.10.1.1 |
fmsPppAuthMasterAuthenticationAuthentifieur : Protocole d'authentification.ro Enumeration .1.3.6.1.4.1.866.20.10.10.71.10.1.10 |
fmsPppAuthMasterSuccessCounterAuthentifieur : Nb d'authentifications reussies.ro Counter .1.3.6.1.4.1.866.20.10.10.71.10.1.11 |
fmsPppAuthMasterFailureCounterAuthentifieur : Nb d'authentifications echouees.ro Counter .1.3.6.1.4.1.866.20.10.10.71.10.1.12 |
fmsPppAuthSlaveAuthenticationAuthentifie : Protocole d'authentification.ro Enumeration .1.3.6.1.4.1.866.20.10.10.71.10.1.20 |
fmsPppAuthSlaveSuccessCounterAuthentifie : Nb d'authentifications reussies.ro Counter .1.3.6.1.4.1.866.20.10.10.71.10.1.21 |
fmsPppAuthSlaveFailureCounterAuthentifie : Nb d'authentifications echouees.ro Counter .1.3.6.1.4.1.866.20.10.10.71.10.1.22 |
fmStatPppIpAddrAssignmentTable SEQUENCE OF FmStatPppIpAddrAssignmentEntry .1.3.6.1.4.1.866.20.10.10.71.11 |
fmStatPppIpAddrAssignmentEntryAn entry of fmStatPppIpAddrAssignmentTable. FmStatPppIpAddrAssignmentEntry .1.3.6.1.4.1.866.20.10.10.71.11.1 |
fmsPppIpAddrLineIdNumero de la ligne PPP.ro INTEGER .1.3.6.1.4.1.866.20.10.10.71.11.1.1 |
fmsPppIpAddrReceivedAdresse IP recue.ro IpAddress .1.3.6.1.4.1.866.20.10.10.71.11.1.10 |
fmsPppIpAddrSentAdresse IP attribuee.ro IpAddress .1.3.6.1.4.1.866.20.10.10.71.11.1.11 |
fmStatE1 OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.80 |
fmStatE1Ds1ChannelNumber OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.80.1 |
fmsE1Ds1ChIfNumberNombre de canaux E1 ou DS1ro INTEGER .1.3.6.1.4.1.866.20.10.10.80.1.1 |
fmStatE1Ds1ChannelTableThis table contains SEQUENCE OF FmStatE1Ds1ChannelEntry .1.3.6.1.4.1.866.20.10.10.80.2 |
fmStatE1Ds1ChannelEntryAn entry of fmStatE1Ds1ChannelTable. FmStatE1Ds1ChannelEntry .1.3.6.1.4.1.866.20.10.10.80.2.1 |
fmsE1Ds1ChIfPhysIdInterface physique E1ro INTEGER .1.3.6.1.4.1.866.20.10.10.80.2.1.1 |
fmsE1Ds1ChIfChannelIdInterface canal E1ro INTEGER .1.3.6.1.4.1.866.20.10.10.80.2.1.2 |
fmsE1Ds1ChIfTypeType de l'interfacero Enumeration .1.3.6.1.4.1.866.20.10.10.80.2.1.3 |
fmsE1Ds1ChIfDescrDescriptionro DisplayString .1.3.6.1.4.1.866.20.10.10.80.2.1.4 |
fmsE1Ds1ChIfMtuTaille maximum d'une tramero INTEGER .1.3.6.1.4.1.866.20.10.10.80.2.1.5 |
fmsE1Ds1ChIfSpeedDebit de l'interfacero INTEGER .1.3.6.1.4.1.866.20.10.10.80.2.1.6 |
fmsE1Ds1ChIfPhysAddressAdresse physiquero OCTET STRING .1.3.6.1.4.1.866.20.10.10.80.2.1.7 |
fmsE1Ds1ChIfAdminStatusEtat desire de l'interfacerw Enumeration .1.3.6.1.4.1.866.20.10.10.80.2.1.8 |
fmsE1Ds1ChIfOperStatusEtat operationnel de l'interfacero Enumeration .1.3.6.1.4.1.866.20.10.10.80.2.1.9 |
fmsE1Ds1ChIfLastChangeValeur de sysUpTime au moment ou l'interface est
passe dans l'etat operationnel courantro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.20.10.10.80.2.1.10 |
fmsE1Ds1ChIfInOctetsNombre d'octets recusro Counter .1.3.6.1.4.1.866.20.10.10.80.2.1.11 |
fmsE1Ds1ChIfInUcastPktsNombre de paquets Unicast recusro Counter .1.3.6.1.4.1.866.20.10.10.80.2.1.12 |
fmsE1Ds1ChIfInNUcastPktsNombre de paquets non Unicast recusro Counter .1.3.6.1.4.1.866.20.10.10.80.2.1.13 |
fmsE1Ds1ChIfInDiscardsNombre de paquets recus detruitsro Counter .1.3.6.1.4.1.866.20.10.10.80.2.1.14 |
fmsE1Ds1ChIfInErrorsNombre de paquets recus en erreurro Counter .1.3.6.1.4.1.866.20.10.10.80.2.1.15 |
fmsE1Ds1ChIfInUnknownProtosNombre de paquets recus avec protocole inconnuro Counter .1.3.6.1.4.1.866.20.10.10.80.2.1.16 |
fmsE1Ds1ChIfOutOctetsNombre d'octets emisro Counter .1.3.6.1.4.1.866.20.10.10.80.2.1.17 |
fmsE1Ds1ChIfOutUcastPktsNombre de paquets Unicast emisro Counter .1.3.6.1.4.1.866.20.10.10.80.2.1.18 |
fmsE1Ds1ChIfOutNUcastPktsNombre de paquets non Unicast emisro Counter .1.3.6.1.4.1.866.20.10.10.80.2.1.19 |
fmsE1Ds1ChIfOutDiscardsNombre de paquets emis detruitsro Counter .1.3.6.1.4.1.866.20.10.10.80.2.1.20 |
fmsE1Ds1ChIfOutErrorsNombre de paquets emis en erreurro Counter .1.3.6.1.4.1.866.20.10.10.80.2.1.21 |
fmsE1Ds1ChIfOutQLenLongueur de la file des paquets emisro Gauge .1.3.6.1.4.1.866.20.10.10.80.2.1.22 |
fmsE1Ds1ChIfSpecificOID de la MIB de referencero INTEGER .1.3.6.1.4.1.866.20.10.10.80.2.1.23 |
fmStatS2 OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.90 |
fmStatS2BChannelTable SEQUENCE OF FmStatS2BChannelEntry .1.3.6.1.4.1.866.20.10.10.90.1 |
fmStatS2BChannelEntryAn entry of fmStatS2BChannelTable. FmStatS2BChannelEntry .1.3.6.1.4.1.866.20.10.10.90.1.1 |
fmsS2BChPhysIfIdInterface physique associee au canalro INTEGER .1.3.6.1.4.1.866.20.10.10.90.1.1.1 |
fmsS2BChChannelIdNumero de canalro INTEGER .1.3.6.1.4.1.866.20.10.10.90.1.1.2 |
fmsS2BChProtoProtocole associe au canalro Enumeration .1.3.6.1.4.1.866.20.10.10.90.1.1.3 |
fmsS2BChIfSpeedDebit du canalro INTEGER .1.3.6.1.4.1.866.20.10.10.90.1.1.4 |
fmsS2BChAdminStatusEtat desire du canalrw Enumeration .1.3.6.1.4.1.866.20.10.10.90.1.1.5 |
fmsS2BChOperStatusEtat operationnel du canalro Enumeration .1.3.6.1.4.1.866.20.10.10.90.1.1.6 |
fmsS2BChIfLastChangeValeur de sysUpTime au moment ou le canal est
passe dans l'etat operationnel courantro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.20.10.10.90.1.1.7 |
fmsS2BChIfInOctetsNombre d'octets recusro Counter .1.3.6.1.4.1.866.20.10.10.90.1.1.8 |
fmsS2BChIfOutOctetsNombre d'octets emisro Counter .1.3.6.1.4.1.866.20.10.10.90.1.1.9 |
fmsS2BChIfCalledAddressAdresse appeleero OCTET STRING .1.3.6.1.4.1.866.20.10.10.90.1.1.10 |
fmsS2BChIfCallingAddressAdresse appelantero OCTET STRING .1.3.6.1.4.1.866.20.10.10.90.1.1.11 |
fmStatS0 OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.10.91 |
fmStatS0BChannelTable SEQUENCE OF FmStatS0BChannelEntry .1.3.6.1.4.1.866.20.10.10.91.1 |
fmStatS0BChannelEntryAn entry of fmStatS0BChannelTable. FmStatS0BChannelEntry .1.3.6.1.4.1.866.20.10.10.91.1.1 |
fmsS0BChPhysIfIdThe value of this object is the number of the
physical port the basic rate interface B channel
is related to.ro INTEGER .1.3.6.1.4.1.866.20.10.10.91.1.1.1 |
fmsS0BChChannelIdThe value of this object is the identification
number of the basic rate interface B channel.ro INTEGER .1.3.6.1.4.1.866.20.10.10.91.1.1.2 |
fmsS0BChProtoThe value of this object is the protocol related
to the basic rate interface B channel.ro Enumeration .1.3.6.1.4.1.866.20.10.10.91.1.1.3 |
fmsS0BChIfSpeedThe value of this object is the speed of the basic
rate interface B channel.ro INTEGER .1.3.6.1.4.1.866.20.10.10.91.1.1.4 |
fmsS0BChAdminStatusThe value of this object is the operational state
wanted for the basic rate interface B channel.rw Enumeration .1.3.6.1.4.1.866.20.10.10.91.1.1.5 |
fmsS0BChOperStatusThe value of this object is the current
operational state of the basic rate interface B
channel.ro Enumeration .1.3.6.1.4.1.866.20.10.10.91.1.1.6 |
fmsS0BChIfLastChangeThe value of this object is the value of the
sysUpTime at the time when the basic rate
interface B channel took its current operational
state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.20.10.10.91.1.1.7 |
fmsS0BChIfInOctetsThe value of this object is the number of bytes
received on the basic rate interface B channel.ro Counter .1.3.6.1.4.1.866.20.10.10.91.1.1.8 |
fmsS0BChIfOutOctetsThe value of this object is the number of bytes
sent on the basic rate interface B channel.ro Counter .1.3.6.1.4.1.866.20.10.10.91.1.1.9 |
fmsS0BChIfCalledAddressThe value of this object is the called address.ro OCTET STRING .1.3.6.1.4.1.866.20.10.10.91.1.1.10 |
fmsS0BChIfCallingAddressThe value of this object is the caller address.ro OCTET STRING .1.3.6.1.4.1.866.20.10.10.91.1.1.11 |
fmOsi OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.15 |
fmOsiCLNP OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.15.1 |
fmOsiCLNPSystem OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.15.1.1 |
fmOsiForwardingForwardingro Enumeration .1.3.6.1.4.1.866.20.10.15.1.1.20 |
fmOsiCLNPSysOutPDUsclnpSysOutPDUsro Counter .1.3.6.1.4.1.866.20.10.15.1.1.30 |
fmOsiCLNPSysInPDUsclnpSysInPDUsro Counter .1.3.6.1.4.1.866.20.10.15.1.1.35 |
fmOsiCLNPSysErrMemFailsclnpSysErrMemFailsro Counter .1.3.6.1.4.1.866.20.10.15.1.1.40 |
fmOsiCLNPCircuitTable SEQUENCE OF FmOsiCLNPCircuitEntry .1.3.6.1.4.1.866.20.10.15.1.5 |
fmOsiCLNPCircuitEntryAn entry of fmOsiCLNPCircuitTable. FmOsiCLNPCircuitEntry .1.3.6.1.4.1.866.20.10.15.1.5.1 |
fmOsiCLNPCircIndexclnpCircIndexro INTEGER .1.3.6.1.4.1.866.20.10.15.1.5.1.1 |
fmOsiCLNPCircOutPDUsclnpCircOutPDUsro Counter .1.3.6.1.4.1.866.20.10.15.1.5.1.35 |
fmOsiCLNPCircInPDUsclnpCircInPDUsro Counter .1.3.6.1.4.1.866.20.10.15.1.5.1.40 |
fmOsiESIS OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.15.5 |
fmOsiESISSystem OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.15.5.1 |
fmOsiESISSysOutPDUsesisSysOutPDUsro Counter .1.3.6.1.4.1.866.20.10.15.5.1.30 |
fmOsiESISSysInPDUsesisSysInPDUsro Counter .1.3.6.1.4.1.866.20.10.15.5.1.35 |
fmOsiESISCircuitTable SEQUENCE OF FmOsiESISCircuitEntry .1.3.6.1.4.1.866.20.10.15.5.5 |
fmOsiESISCircuitEntryAn entry of fmOsiESISCircuitTable. FmOsiESISCircuitEntry .1.3.6.1.4.1.866.20.10.15.5.5.1 |
fmOsiESISCircIndexesisCircIndexro INTEGER .1.3.6.1.4.1.866.20.10.15.5.5.1.1 |
fmOsiESISCircOutPDUsesisCircOutPDUsro Counter .1.3.6.1.4.1.866.20.10.15.5.5.1.35 |
fmOsiESISCircInPDUsesisCircInPDUsro Counter .1.3.6.1.4.1.866.20.10.15.5.5.1.40 |
fmOsiISIS OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.15.10 |
fmOsiISISSystem OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.15.10.1 |
fmOsiISISSysOutPduisisSysOutPDUsro Counter .1.3.6.1.4.1.866.20.10.15.10.1.30 |
fmOsiISISSysInPduisisSysInPDUsro Counter .1.3.6.1.4.1.866.20.10.15.10.1.33 |
fmOsiISISSysL1StateisisSysL1Statero Enumeration .1.3.6.1.4.1.866.20.10.15.10.1.35 |
fmOsiISISSysCorrLSPisisSysCorrLSPsro Counter .1.3.6.1.4.1.866.20.10.15.10.1.37 |
fmOsiISISSysL1DbaseOloadsisisSysLSPL1DbaseOloadsro Counter .1.3.6.1.4.1.866.20.10.15.10.1.40 |
fmOsiISISSysttmpToExMaxSaqNumsisisSysAttmptToExMaxSeqNumsro Counter .1.3.6.1.4.1.866.20.10.15.10.1.42 |
fmOsiISISSysSeqNumSkipsisisSysSeqNumSkipsro Counter .1.3.6.1.4.1.866.20.10.15.10.1.44 |
fmOsiISISSysOwnLSPPurgesisisSysOwnLSPPurgesro Counter .1.3.6.1.4.1.866.20.10.15.10.1.46 |
fmOsiISISSysISFieldLenMismatchesisisSysIDFieldLenMismatchesro Counter .1.3.6.1.4.1.866.20.10.15.10.1.48 |
fmOsiISISSysMaxAreaAddrMismatchesisisSysMaxAreaAddrMismatchesro Counter .1.3.6.1.4.1.866.20.10.15.10.1.50 |
fmOsiISISSysL2StateisisSysL2Statero Enumeration .1.3.6.1.4.1.866.20.10.15.10.1.52 |
fmOsiISISSysLSPL2DbaseOloadsisisSysLSPL2DbaseOloadsro Counter .1.3.6.1.4.1.866.20.10.15.10.1.54 |
fmOsiISISSysAuthFailsisisSysAuthFailsro Counter .1.3.6.1.4.1.866.20.10.15.10.1.56 |
fmOsiISISLogAdjcencyStateChangesisisLogAdjacencyStateChangesrw Counter .1.3.6.1.4.1.866.20.10.15.10.1.58 |
fmOsiISISCircuitTable SEQUENCE OF FmOsiISISCircuitEntry .1.3.6.1.4.1.866.20.10.15.10.5 |
fmOsiISISCircuitEntryAn entry of fmOsiISISCircuitTable. FmOsiISISCircuitEntry .1.3.6.1.4.1.866.20.10.15.10.5.1 |
fmOsiISISCircIndexisisCircIndexro INTEGER .1.3.6.1.4.1.866.20.10.15.10.5.1.1 |
fmOsiISISCircOutPduisisCircOutPDUsro Counter .1.3.6.1.4.1.866.20.10.15.10.5.1.30 |
fmOsiISISCircInPduisisCircInPDUsro Counter .1.3.6.1.4.1.866.20.10.15.10.5.1.35 |
fmOsiISISCircAdjChangesisisCircAdjChangesro Counter .1.3.6.1.4.1.866.20.10.15.10.5.1.40 |
fmOsiISISCircInitFailsisisCircInitFailsro Counter .1.3.6.1.4.1.866.20.10.15.10.5.1.42 |
fmOsiISISCircRejAdjsisisCircRejAdjsro Counter .1.3.6.1.4.1.866.20.10.15.10.5.1.44 |
fmOsiISISCircOutCtrlPduisisCircOutCtrlPDUsro Counter .1.3.6.1.4.1.866.20.10.15.10.5.1.46 |
fmOsiISISCircInCrtlPduisisCircInCtrlPDUsro Counter .1.3.6.1.4.1.866.20.10.15.10.5.1.48 |
fmOsiISISCircIDFieldLenMismatchesisisCircIDFieldLenMismatchesro Counter .1.3.6.1.4.1.866.20.10.15.10.5.1.50 |
fmOsiISISCircMaxAreaAddrMismatchesisisCircMaxAreaAddrMismatchesro Counter .1.3.6.1.4.1.866.20.10.15.10.5.1.52 |
fmOsiISISCircL1DesISisisCircL1DesISro DisplayString .1.3.6.1.4.1.866.20.10.15.10.5.1.54 |
fmOsiISISCircLANL1DesISChangesisisCircLANL1DesISChangesro Counter .1.3.6.1.4.1.866.20.10.15.10.5.1.56 |
fmOsiISISCircL2DesISisisCircL2DesISro DisplayString .1.3.6.1.4.1.866.20.10.15.10.5.1.58 |
fmOsiISISCircLANL2DesISChangesisisCircLANL2DesISChangesro Counter .1.3.6.1.4.1.866.20.10.15.10.5.1.60 |
fmOsiISISCircAuthFailsisisCircAuthFailsro Counter .1.3.6.1.4.1.866.20.10.15.10.5.1.62 |
fmOsiISISAreaTable SEQUENCE OF FmOsiISISAreaEntry .1.3.6.1.4.1.866.20.10.15.10.10 |
fmOsiISISAreaEntryAn entry of fmOsiISISAreaTable. FmOsiISISAreaEntry .1.3.6.1.4.1.866.20.10.15.10.10.1 |
fmOsiISISAreaAddressArea Addressro DisplayString .1.3.6.1.4.1.866.20.10.15.10.10.1.1 |
fmOsiISISISAdjacencyTable SEQUENCE OF FmOsiISISISAdjacencyEntry .1.3.6.1.4.1.866.20.10.15.10.15 |
fmOsiISISISAdjacencyEntryAn entry of fmOsiISISISAdjacencyTable. FmOsiISISISAdjacencyEntry .1.3.6.1.4.1.866.20.10.15.10.15.1 |
fmOsiISISISAdjCircIndexCircuit Indexro INTEGER .1.3.6.1.4.1.866.20.10.15.10.15.1.1 |
fmOsiISISISAdjIndexAdjacency Indexro INTEGER .1.3.6.1.4.1.866.20.10.15.10.15.1.5 |
fmOsiISISISAdjSysIDSystem IDro DisplayString .1.3.6.1.4.1.866.20.10.15.10.15.1.10 |
fmOsiISISISAdjStateStatero Enumeration .1.3.6.1.4.1.866.20.10.15.10.15.1.12 |
fmOsiISISISAdjSNPAAddressSNPA Addressro DisplayString .1.3.6.1.4.1.866.20.10.15.10.15.1.14 |
fmOsiISISISAdjTypeTypero Enumeration .1.3.6.1.4.1.866.20.10.15.10.15.1.20 |
fmOsiISISISAdjUsageUsagero Enumeration .1.3.6.1.4.1.866.20.10.15.10.15.1.22 |
fmOsiISISISAdjHoldTimerHolding Timerro INTEGER .1.3.6.1.4.1.866.20.10.15.10.15.1.26 |
fmOsiISISISAdjPriorityPriorityro INTEGER .1.3.6.1.4.1.866.20.10.15.10.15.1.30 |
fmOsiISISISAdjacencyAreaAddressTable SEQUENCE OF FmOsiISISISAdjacencyAreaAddressEntry .1.3.6.1.4.1.866.20.10.15.10.17 |
fmOsiISISISAdjacencyAreaAddressEntryAn entry of fmOsiISISISAdjacencyAreaAddressTable. FmOsiISISISAdjacencyAreaAddressEntry .1.3.6.1.4.1.866.20.10.15.10.17.1 |
fmOsiISISISAdjAreaAddrCircIndexCircuit Indexro INTEGER .1.3.6.1.4.1.866.20.10.15.10.17.1.1 |
fmOsiISISISAdjAreaAddrAdjIndexAdjacency Indexro INTEGER .1.3.6.1.4.1.866.20.10.15.10.17.1.3 |
fmOsiISISISAdjAreaAddressArea Addressro DisplayString .1.3.6.1.4.1.866.20.10.15.10.17.1.5 |
fmOsiISISESAdjacencyTable SEQUENCE OF FmOsiISISESAdjacencyEntry .1.3.6.1.4.1.866.20.10.15.10.20 |
fmOsiISISESAdjacencyEntryAn entry of fmOsiISISESAdjacencyTable. FmOsiISISESAdjacencyEntry .1.3.6.1.4.1.866.20.10.15.10.20.1 |
fmOsiISISESAdjCircIndexCircuit Indexro INTEGER .1.3.6.1.4.1.866.20.10.15.10.20.1.1 |
fmOsiISISESAdjAdjIndexAdjacency Indexro INTEGER .1.3.6.1.4.1.866.20.10.15.10.20.1.3 |
fmOsiISISESAdjESIDSystem IDro DisplayString .1.3.6.1.4.1.866.20.10.15.10.20.1.5 |
fmOsiISISESAdjStateStatero Enumeration .1.3.6.1.4.1.866.20.10.15.10.20.1.10 |
fmOsiISISESAdjNeighSNPAAdressSNPA Addressro DisplayString .1.3.6.1.4.1.866.20.10.15.10.20.1.15 |
fmOsiISISESAdjTypeTypero Enumeration .1.3.6.1.4.1.866.20.10.15.10.20.1.20 |
fmOsiISISReachableAddressTable SEQUENCE OF FmOsiISISReachableAddressEntry .1.3.6.1.4.1.866.20.10.15.10.25 |
fmOsiISISReachableAddressEntryAn entry of fmOsiISISReachableAddressTable. FmOsiISISReachableAddressEntry .1.3.6.1.4.1.866.20.10.15.10.25.1 |
fmOsiISISRASystemTypeSystem Typero Enumeration .1.3.6.1.4.1.866.20.10.15.10.25.1.1 |
fmOsiISISRAAddressReachable Addressro DisplayString .1.3.6.1.4.1.866.20.10.15.10.25.1.5 |
fmOsiISISRAMetricMetricro Enumeration .1.3.6.1.4.1.866.20.10.15.10.25.1.10 |
fmOsiISISRAPathIdentifierPath Idendifierro INTEGER .1.3.6.1.4.1.866.20.10.15.10.25.1.15 |
fmOsiISISRATypeTypero Enumeration .1.3.6.1.4.1.866.20.10.15.10.25.1.20 |
fmOsiISISRACircuitIdCircuit Idro INTEGER .1.3.6.1.4.1.866.20.10.15.10.25.1.25 |
fmOsiISISRAAdjacencyIdAdjacency Idro INTEGER .1.3.6.1.4.1.866.20.10.15.10.25.1.35 |
fmOsiISISRAPathCostPath Costro INTEGER .1.3.6.1.4.1.866.20.10.15.10.25.1.40 |
fmOsiISISRASNPAAddressSNPA Addressro DisplayString .1.3.6.1.4.1.866.20.10.15.10.25.1.45 |
fmPing OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.16 |
fmPingTable SEQUENCE OF FmPingEntry .1.3.6.1.4.1.866.20.10.16.1 |
fmPingEntryAn entry of fmPingTable. FmPingEntry .1.3.6.1.4.1.866.20.10.16.1.1 |
fmPingIdentifierIdentifierrw INTEGER .1.3.6.1.4.1.866.20.10.16.1.1.1 |
fmPingProtocolProtocolrw Enumeration .1.3.6.1.4.1.866.20.10.16.1.1.4 |
fmPingAddressAddressrw DisplayString .1.3.6.1.4.1.866.20.10.16.1.1.6 |
fmPingCountRequestCountRequestrw INTEGER .1.3.6.1.4.1.866.20.10.16.1.1.10 |
fmPingPacketSizePacketSizerw INTEGER .1.3.6.1.4.1.866.20.10.16.1.1.12 |
fmPingDelayDelayrw INTEGER .1.3.6.1.4.1.866.20.10.16.1.1.16 |
fmPingTimeoutTimeoutrw INTEGER .1.3.6.1.4.1.866.20.10.16.1.1.18 |
fmPingPermanentPermanent Flagrw Enumeration .1.3.6.1.4.1.866.20.10.16.1.1.20 |
fmPingSentPacketsSent Packetsro Counter .1.3.6.1.4.1.866.20.10.16.1.1.30 |
fmPingReceivedPacketsReceived Packetsro Counter .1.3.6.1.4.1.866.20.10.16.1.1.32 |
fmPingMinRoundTripMin Round Tripro INTEGER .1.3.6.1.4.1.866.20.10.16.1.1.40 |
fmPingAvgRoundTripAvg Round Tripro INTEGER .1.3.6.1.4.1.866.20.10.16.1.1.41 |
fmPingMaxRoundTripMax Round Tripro INTEGER .1.3.6.1.4.1.866.20.10.16.1.1.42 |
fmPingCompletedFlagPing completed flagro Enumeration .1.3.6.1.4.1.866.20.10.16.1.1.48 |
fmPingOwnerOwner descriptionrw DisplayString .1.3.6.1.4.1.866.20.10.16.1.1.50 |
fmPingAdminStateAdminStaterw Enumeration .1.3.6.1.4.1.866.20.10.16.1.1.52 |
fmRip2 OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.17 |
fmRip2GlobalGroup OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.17.1 |
fmRip2GlobalRouteChangesRIP2 Global Route Changes. The number of changes
made to the IP Route Database by RIP.ro Counter .1.3.6.1.4.1.866.20.10.17.1.1 |
fmRip2GlobalQueriesRIP2 Global Queries. The number of responses sent
to RIP queries from other systems.ro Counter .1.3.6.1.4.1.866.20.10.17.1.2 |
fmRip2IfStatTableA list of subnets which require separate
status monitoring in RIP SEQUENCE OF FmRip2IfStatEntry .1.3.6.1.4.1.866.20.10.17.2 |
fmRip2IfStatEntryAn entry of fmRip2IfStatTable. FmRip2IfStatEntry .1.3.6.1.4.1.866.20.10.17.2.1 |
fmRip2IfStatAddressRIP2 Interface Stat Ip Address. The IP Address of
this system on the indicated subnetro IpAddress .1.3.6.1.4.1.866.20.10.17.2.1.1 |
fmRip2IfStatRcvBadPacketsRIP2 Interface Stat Received Bad Packets. The
number of RIP response packets received bythe RIP
process which were subsequently discarded for
any reason (e.g. a version 0 packet, or an unknown
command type).ro Counter .1.3.6.1.4.1.866.20.10.17.2.1.2 |
fmRip2IfStatRcvBadRoutesRIP2 Interface Stat Received Bad Routes. The
number of routes, in valid RIP packets,which
were ignored for any reason (e.g. unknown address
family, or invalid metric).ro Counter .1.3.6.1.4.1.866.20.10.17.2.1.3 |
fmRip2IfStatSentUpdatesRIP2 Interface Stat Sent Updates. The number of
triggered RIP updates actually sent on this
interface. This explicitly does NOT include full
updates sent containing new information.ro Counter .1.3.6.1.4.1.866.20.10.17.2.1.4 |
fmRip2IfStatStatusRIP2 Interface Stat Status. Writing invalid has
the effect of deleting this interface.ro Enumeration .1.3.6.1.4.1.866.20.10.17.2.1.5 |
fmRip2IfConfTableA list of subnets which require separate
configuration in RIP. SEQUENCE OF FmRip2IfConfEntry .1.3.6.1.4.1.866.20.10.17.3 |
fmRip2IfConfEntryAn entry of fmRip2IfConfTable. FmRip2IfConfEntry .1.3.6.1.4.1.866.20.10.17.3.1 |
fmRip2IfConfAddressRIP2 Interface Conf Ip Address. The IP Address of
this system on the indicated subnet.ro IpAddress .1.3.6.1.4.1.866.20.10.17.3.1.1 |
fmRip2IfConfDomainRIP2 Interface Conf Domain. Value inserted into
the Routing Domain field of all RIP packets sent
on this interface.ro DisplayString .1.3.6.1.4.1.866.20.10.17.3.1.2 |
fmRip2IfConfAuthTypeRIP2 Interface Conf Authentiction Type. The type
of Authentication used on this interface.ro Enumeration .1.3.6.1.4.1.866.20.10.17.3.1.3 |
fmRip2IfConfAuthKeyRIP2 Interface Conf Authentication Key. The value
to be used as the Authentication Key whenever
the corresponding instance of
rip2IfConfAuthType has the value
simplePassword. A modification of the
corresponding instance of rip2IfConfAuthType does
not modify the rip2IfConfAuthKey value. If a
string shorter than 16 octets is supplied, it
will be left-justified and padded to 16 octets, on
the right, with nulls (0x00). Reading this object
always results in an OCTET STRING of length
zero; authentication may not be bypassed by
reading the MIB object.ro DisplayString .1.3.6.1.4.1.866.20.10.17.3.1.4 |
fmRip2IfConfSendRIP2 Interface Conf Send. What the router sends
on this interface. ripVersion1 implies sending
RIP updates compliant with RFC 1058.
rip1Compatible implies broadcasting RIP-2 updates
using RFC 1058 route subsumption rules.
ripVersion2 implies multicasting RIP-2 updates.ro Enumeration .1.3.6.1.4.1.866.20.10.17.3.1.5 |
fmRip2IfConfReceiveRIP2 Interface Conf Receive. This indicates which
version of RIP updates are to be accepted.
Note that rip2 and rip1OrRip2 implies reception
of multicast packets.ro Enumeration .1.3.6.1.4.1.866.20.10.17.3.1.6 |
fmRip2IfConfDefaultMetricRIP2 Interface Conf Default Metric. This variable
indicates what metric is to be used as a
default route in RIP updates originated on this
interface. A value of zero indicates that no
default route should be originated; in this case,
a default route via another router may be
propagated.ro INTEGER .1.3.6.1.4.1.866.20.10.17.3.1.7 |
fmRip2IfConfStatusRIP2 Interface Conf Status. Writing invalid has
the effect of deleting this interface.ro Enumeration .1.3.6.1.4.1.866.20.10.17.3.1.8 |
fmRip2PeerTableA list of RIP Peers. SEQUENCE OF FmRip2PeerEntry .1.3.6.1.4.1.866.20.10.17.4 |
fmRip2PeerEntryAn entry of fmRip2PeerTable. FmRip2PeerEntry .1.3.6.1.4.1.866.20.10.17.4.1 |
fmRip2PeerAddressRIP2 Peer Ip Address. The IP Address of the Peer
System.ro IpAddress .1.3.6.1.4.1.866.20.10.17.4.1.1 |
fmRip2PeerDomainRIP2 Peer Domain. The value in the Routing Domain
field in RIP packets received from the peerro DisplayString .1.3.6.1.4.1.866.20.10.17.4.1.2 |
fmRip2PeerLastUpdateRIP2 Peer Last Update. The value of sysUpTime when
the most recent RIP update was received from this
system.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.20.10.17.4.1.3 |
fmRip2PeerVersionRIP2 Peer Version. The RIP version number in the
header of the last RIP packet received.ro INTEGER .1.3.6.1.4.1.866.20.10.17.4.1.4 |
fmRip2PeerRcvBadPacketsRIP2 Peer Received Bad Packets. The number of RIP
response packets from this peer discarded as
invalid.ro Counter .1.3.6.1.4.1.866.20.10.17.4.1.5 |
fmRip2PeerRcvBadRoutesRIP2 Peer Received Bad Routes. The number of
routes from this peer that were ignored because
the entry format was invalid.ro Counter .1.3.6.1.4.1.866.20.10.17.4.1.6 |
fmOspf OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.18 |
fmOspfStandard OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.18.1 |
fmOspfStandardGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.18.1.1 |
fmOspfStandardRouterIdOSPF Router Id. A 32-bit integer uniquely
identifying the router in the Autonomous System.
By convention, to ensure uniqueness, this should
default to the value of one of the router's IP
interface addresses.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.1.1 |
fmOspfStandardAdminStatOSPF Administrative Status. The administrative
status of OSPF in the router. The value 'enabled'
denotes that the OSPF Process is active on at
least one interface; 'disabled' disables it on all
interfaces.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.1.2 |
fmOspfStandardVersionNumberOSPF Version Number. The current version number of
the OSPF protocol is 2.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.1.3 |
fmOspfStandardAreaBdrRtrStatusOSPF Area Border Router Status. A flag to note
whether this router is an area border router.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.1.4 |
fmOspfStandardASBdrRtrStatusOSPF AS Border Router Status A flag to note
whether this router is an Autonomous System border
router.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.1.5 |
fmOspfStandardExternLSACountOSPF Extern LSA Count. The number of external (LS
type 5) link-state advertisements in the
link-state database.ro Gauge .1.3.6.1.4.1.866.20.10.18.1.1.6 |
fmOspfStandardExternLSACksumSumOSPF Extern LSA Checksum. The 32-bit unsigned sum
of the LS checksums of the external link-state
advertisements contained in the link-state
database. This sum can be used to determine if
there has been a change in a router's link state
database, and to compare the link-state database
of two routers.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.1.7 |
fmOspfStandardTOSSupportOSPF TOS Support. The router's support for
type-of-service routing.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.1.8 |
fmOspfStandardOriginateNewLSAsOSPF Originate New LSAs. The number of new
link-state advertisements that have been
originated. This number is incremented each time
the router originates a new LSA.ro Counter .1.3.6.1.4.1.866.20.10.18.1.1.9 |
fmOspfStandardRxNewLSAsOSPF Receive New LSAs. The number of link-state
advertisements received determined to be new
instantiations. This number does not include newer
instantiations of self-originated link-state
advertisements.ro Counter .1.3.6.1.4.1.866.20.10.18.1.1.10 |
fmOspfStandardAreaTableInformation describing the configured parameters
and cumulative statistics of the router's attached
areas. SEQUENCE OF FmOspfStandardAreaEntry .1.3.6.1.4.1.866.20.10.18.1.2 |
fmOspfStandardAreaEntryAn entry of fmOspfStandardAreaTable. FmOspfStandardAreaEntry .1.3.6.1.4.1.866.20.10.18.1.2.1 |
fmOspfStandardAreaIdOSPF Area Id. A 32-bit integer uniquely
identifying an area. Area ID 0.0.0.0 is used for
the OSPF backbone.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.2.1.1 |
fmOspfStandardAuthTypeOSPF Area Authentication Type. The authentication
type specified for an area. Additional
authentication types may be assigned locally on a
per Area basis.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.2.1.2 |
fmOspfStandardImportASExternOSPF Area Import AS Extern. The area's support for
importing AS external link-state advertisements.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.2.1.3 |
fmOspfStandardSpfRunsOSPF Area SPF Runs. The number of times that the
intra-area route table has been calculated using
this area's link-state database. This is typically
done using Dijkstra's algorithm.ro Counter .1.3.6.1.4.1.866.20.10.18.1.2.1.4 |
fmOspfStandardAreaBdrRtrCountOSPF Area Border Router Count. The total number of
area border routers reachable within this area.
This is initially zero, and is calculated in each
SPF Pass.ro Gauge .1.3.6.1.4.1.866.20.10.18.1.2.1.5 |
fmOspfStandardASBdrRtrCountOSPF Area AS Border Router Count. The total number
of Autonomous System border routers reachable
within this area. This is initially zero, and is
calculated in each SPF Pass.ro Gauge .1.3.6.1.4.1.866.20.10.18.1.2.1.6 |
fmOspfStandardAreaLSACountOSPF Area LSA Count. The total number of
link-state advertisements in this area's
link-state database, excluding AS External LSA's.ro Gauge .1.3.6.1.4.1.866.20.10.18.1.2.1.7 |
fmOspfStandardAreaLSACksumSumOSPF Area LSA Checksum Sum. The 32-bit unsigned
sum of the link-state advertisements' LS checksums
contained in this area's link-state database. This
sum excludes external (LS type 5) link-state
advertisements. The sum can be used to determine
if there has been a change in a router's link
state database, and to compare the link-state
database of two routers.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.2.1.8 |
fmOspfStandardStubAreaTableThe set of metrics that will be advertised by a
default Area Border Router into a stub area SEQUENCE OF FmOspfStandardStubAreaEntry .1.3.6.1.4.1.866.20.10.18.1.3 |
fmOspfStandardStubAreaEntryAn entry of fmOspfStandardStubAreaTable. FmOspfStandardStubAreaEntry .1.3.6.1.4.1.866.20.10.18.1.3.1 |
fmOspfStandardStubAreaIDOSPF Stub Area Id. The 32 bit identifier for the
Stub Area. On creation, this can be derived from
the instance.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.3.1.1 |
fmOspfStandardStubTOSOSPF Stub Area TOS. The Type of Service associated
with the metric. On creation, this can be derived
from the instance.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.3.1.2 |
fmOspfStandardStubMetricOSPF Stub Area Metric. The metric value applied at
the indicated type of service. By default, this
equals the least metric at the type of service
among the interfaces to other areas.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.3.1.3 |
fmOspfStandardStubStatusOSPF Stub Area Status. This variable displays the
validity or invalidity of the entry. Setting it to
'invalid' has the effect of rendering it
inoperative. The internal effect (row removal) is
implementation dependent
.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.3.1.4 |
fmOspfStandardLsdbTableThe OSPF Process's Links State Database. SEQUENCE OF FmOspfStandardLsdbEntry .1.3.6.1.4.1.866.20.10.18.1.4 |
fmOspfStandardLsdbEntryAn entry of fmOspfStandardLsdbTable. FmOspfStandardLsdbEntry .1.3.6.1.4.1.866.20.10.18.1.4.1 |
fmOspfStandardLsdbAreaIdOSPF Link State Database Area Id The OSPF
Process's Links State Database.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.4.1.1 |
fmOspfStandardLsdbTypeOSPF Link State Database LS Type. The type of the
link state advertisement. Each link state type has
a separate advertisement format.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.4.1.2 |
fmOspfStandardLsdbLSIDOSPF Link State Database LS Id. The Link State ID
is an LS Type Specific field containing either a
Router ID or an IP Address; it identifies the
piece of the routing domain that is being
described by the advertisement.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.4.1.3 |
fmOspfStandardLsdbRouterIdOSPF Link State Database Router Id. The 32 bit
number that uniquely identifies the originating
router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.4.1.4 |
fmOspfStandardLsdbSequenceOSPF Link State Database Sequence. The sequence
number field is a signed 32-bit integer. It is
used to detect old and duplicate link state
advertisements. The space of sequence numbers is
linearly ordered. The larger the sequence number
the more recent the advertisement.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.4.1.5 |
fmOspfStandardLsdbAgeOSPF Link State Database Age. This field is the
age of the link state advertisement in seconds.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.4.1.6 |
fmOspfStandardLsdbChecksumOSPF Link State Database Checksum. This field is
the checksum of the complete contents of the
advertisement, excepting the age field. The age
field is excepted so that an advertisement's age
can be incremented without updating the checksum.
The checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.4.1.7 |
fmOspfStandardLsdbAdvertisementOSPF Link State Database Advertisement. The entire
Link State Advertisement, including its header.ro DisplayString .1.3.6.1.4.1.866.20.10.18.1.4.1.8 |
fmOspfStandardAreaRangeTableA range if IP addresses specified by an IP
address/IP network mask pair. For example, class
B address range of X.X.X.X with a network mask of
255.255.0.0 includes all IP addresses from X.X.0.0
to X.X.255.255. SEQUENCE OF FmOspfStandardAreaRangeEntry .1.3.6.1.4.1.866.20.10.18.1.5 |
fmOspfStandardAreaRangeEntryAn entry of fmOspfStandardAreaRangeTable. FmOspfStandardAreaRangeEntry .1.3.6.1.4.1.866.20.10.18.1.5.1 |
fmOspfStandardAreaRangeAreaIDOSPF Area Range Area Id. The Area the Address
Range is to be found within.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.5.1.1 |
fmOspfStandardAreaRangeNetOSPF Area Range Net. The IP Address of the Net or
Subnet indicated by the range.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.5.1.2 |
fmOspfStandardAreaRangeMaskOSPF Area Range Mask. The Subnet Mask that
pertains to the Net or Subnet.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.5.1.3 |
fmOspfStandardAreaRangeStatusOSPF Area Range Status. This variable displays the
validity or invalidity of the entry. Setting it to
'invalid' has the effect of rendering it
inoperative. The internal effect (row removal) is
implementation dependent.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.5.1.4 |
fmOspfStandardHostTableThe list of Hosts, and their metrics, that the
router will advertise as host routes. SEQUENCE OF FmOspfStandardHostEntry .1.3.6.1.4.1.866.20.10.18.1.6 |
fmOspfStandardHostEntryAn entry of fmOspfStandardHostTable. FmOspfStandardHostEntry .1.3.6.1.4.1.866.20.10.18.1.6.1 |
fmOspfStandardHostIpAddressOSPF Host Ip Address. The IP Address of the Host.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.6.1.1 |
fmOspfStandardHostTOSOSPF Host TOS. The Type of Service of the route
being configured.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.6.1.2 |
fmOspfStandardHostMetricOSPF Host Metric. The Metric to be advertised.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.6.1.3 |
fmOspfStandardHostStatusOSPF Host Status. This variable displays the
validity or invalidity of the entry. Setting it to
'invalid' has the effect of rendering it
inoperative. The internal effect (row removal) is
implementation dependent.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.6.1.4 |
fmOspfStandardIfTableThe OSPF Interface Table describes the interfaces
from the viewpoint of OSPF. SEQUENCE OF FmOspfStandardIfEntry .1.3.6.1.4.1.866.20.10.18.1.7 |
fmOspfStandardIfEntryAn entry of fmOspfStandardIfTable. FmOspfStandardIfEntry .1.3.6.1.4.1.866.20.10.18.1.7.1 |
fmOspfStandardIfIpAddressOSPF Interface Ip Address. The IP address of this
OSPF interface.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.7.1.1 |
fmOspfStandardAddressLessIfOSPF Interface Address Less If. For the purpose of
easing the instancing of addressed and addressless
interfaces; This variable takes the value 0 on
interfaces with IP Addresses, and the
corresponding value of ifIndex for interfaces
having no IP Address.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.7.1.2 |
fmOspfStandardIfAreaIdOSPF Interface Area Id. A 32-bit integer uniquely
identifying the area to which the interface
connects. Area ID 0.0.0.0 is used for the OSPF
backbone.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.7.1.3 |
fmOspfStandardIfTypeOSPF Interface Type. The OSPF interface type. By
way of a default, this field may be intuited from
the corresponding value of ifType. Broadcast LANs,
such as Ethernet and IEEE 802.5, take the value
'broadcast', X.25, Frame Relay, and similar
technologies take the value 'nbma', and links that
are definitively point to point take the value
'pointToPoint'ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.7.1.4 |
fmOspfStandardIfAdminStatOSPF Interface Administrative Status. The OSPF
interface's administrative status. The value
'enabled' denotes that neighbor relationships may
be formed on the interface, and the interface will
be advertised as an internal route to some area.
The value 'disabled' denotes that the interface is
external to OSPF.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.7.1.5 |
fmOspfStandardIfRtrPriorityOSPF Interface Router Priority. The priority of
this interface. Used in multi-access networks,
this field is used in the designated router
election algorithm. The value 0 signifies that the
router is not eligible to become the designated
router on this particular network. In the event of
a tie in this value, routers will use their router
id as a tie breakerro INTEGER .1.3.6.1.4.1.866.20.10.18.1.7.1.6 |
fmOspfStandardIfTransitDelayOSPF Interface Transit Delay. The estimated number
of seconds it takes to transmit a link- state
update packet over this interface.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.7.1.7 |
fmOspfStandardIfRetransIntervalOSPF Interface Retransmit Interval. The number of
seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when
retransmitting database description and link-state
request packets.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.7.1.8 |
fmOspfStandardIfHelloIntervalOSPF Interface Hello Interval. The length of time,
in seconds, between the Hello packets that the
router sends on the interface. This value must be
the same for all routers attached to a common
network.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.7.1.9 |
fmOspfStandardIfRtrDeadIntervalOSPF Interface Dead Interval. The number of
seconds that a router's Hello packets have not
been seen before it's neighbors declare the router
down. This should be some multiple of the Hello
interval. This value must be the same for all
routers attached to a common network.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.7.1.10 |
fmOspfStandardIfPollIntervalOSPF Interface Poll Interval. The larger time
interval, in seconds, between the Hello packets
sent to an inactive non-broadcast multi- access
neighbor.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.7.1.11 |
fmOspfStandardIfStateOSPF Interface State. The OSPF Interface State.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.7.1.12 |
fmOspfStandardIfDesignatedRouterOSPF Interface Designated Router. The IP Address
of the Designated Router.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.7.1.13 |
fmOspfStandardIfBackupDesignatedRouterOSPF Interface Backup Designated Router. The IP
Address of the Backup Designated Router.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.7.1.14 |
fmOspfStandardIfEventsOSPF Interface Events. The number of times this
OSPF interface has changed its state, or an error
has occurred.ro Counter .1.3.6.1.4.1.866.20.10.18.1.7.1.15 |
fmOspfStandardIfAuthKeyOSPF Interface Authentication Key. The
Authentication Key. If the Area's Authorization
Type is simplePassword, and the key length is
shorter than 8 octets, the agent will left adjust
and zero fill to 8 octets. When read, it always
returns an Octet String of length zero.ro DisplayString .1.3.6.1.4.1.866.20.10.18.1.7.1.16 |
fmOspfStandardIfMetricTableThe TOS metrics for a non-virtual interface
identified by the interface index. SEQUENCE OF FmOspfStandardIfMetricEntry .1.3.6.1.4.1.866.20.10.18.1.8 |
fmOspfStandardIfMetricEntryAn entry of fmOspfStandardIfMetricTable. FmOspfStandardIfMetricEntry .1.3.6.1.4.1.866.20.10.18.1.8.1 |
fmOspfStandardIfMetricIpAddressOSPF Interface Metric Ip Address. The IP address
of this OSPF interface. On row creation, this can
be derived from the instance.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.8.1.1 |
fmOspfStandardIfMetricAddressLessIfOSPF Interface Metric Address Less If. For the
purpose of easing the instancing of addressed and
addressless interfaces; This variable takes the
value 0 on interfaces with IP Addresses, and the
value of ifIndex for interfaces having no IP
Address. On row creation, this can be derived from
the instance.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.8.1.2 |
fmOspfStandardIfMetricTOSOSPF Interface Metric TOS. The type of service
metric being referenced. On row creation, this can
be derived from the instance.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.8.1.3 |
fmOspfStandardIfMetricMetricOSPF Interface Metric Metric. The metric of using
this type of service on this interface. The
default value of the TOS 0 Metric is 10^8 /
ifSpeed. The value FFFF is distinguished to mean
'no route via this TOS.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.8.1.4 |
fmOspfStandardIfMetricStatusID FMSIPOSPF Interface Metric Status. This
variable displays the validity or invalidity of
the entry. Setting it to 'invalid' has the effect
of rendering it inoperative. he internal effect
(row removal) is implementation dependent.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.8.1.5 |
fmOspfStandardVirtIfTableInformation about this router's virtual interfaces. SEQUENCE OF FmOspfStandardVirtIfEntry .1.3.6.1.4.1.866.20.10.18.1.9 |
fmOspfStandardVirtIfEntryAn entry of fmOspfStandardVirtIfTable. FmOspfStandardVirtIfEntry .1.3.6.1.4.1.866.20.10.18.1.9.1 |
fmOspfStandardVirtIfAreaIDOSPF Virtual Interface Area ID. The Transit Area
that the Virtual Link traverses. By definition,
this is not 0.0.0.0ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.9.1.1 |
fmOspfStandardVirtIfNeighborOSPF Virtual Interface Neighbor. The Router ID of
the Virtual Neighbor.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.9.1.2 |
fmOspfStandardVirtIfTransitDelayOSPF Virtual Interface Transit Delay. The
estimated number of seconds it takes to transmit a
link- state update packet over this interface.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.9.1.3 |
fmOspfStandardVirtIfRetransIntervalOSPF Virtual Interface Retransmit Interval. The
number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when
retransmitting database description and link-state
request packets. This value should be well over
the expected round-trip time.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.9.1.4 |
fmOspfStandardVirtIfHelloIntervalOSPF Virtual Interface Hello Interval. The length
of time, in seconds, between the Hello packets
that the router sends on the interface. This value
must be the same for the virtual neighbor.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.9.1.5 |
fmOspfStandardVirtIfRtrDeadIntervalOSPF Virtual Interface Router Dead Interval. The
number of seconds that a router's Hello packets
have not been seen before it's neighbors declare
the router down. This should be some multiple of
the Hello interval. This value must be the same
for the virtual neighbor.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.9.1.6 |
fmOspfStandardVirtIfStateOSPF Virtual Interface State. OSPF virtual
interface states.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.9.1.7 |
fmOspfStandardVirtIfEventsOSPF Virtual Interface Events. The number of state
changes or error events on this Virtual Link.ro Counter .1.3.6.1.4.1.866.20.10.18.1.9.1.8 |
fmOspfStandardVirtIfAuthKeyOSPF Virtual Interface Authentication Type. If
Authentication Type is simplePassword, the device
will left adjust and zero fill to 8 octets. When
read, ospfVifAuthKey always returns a string of
length zero.ro DisplayString .1.3.6.1.4.1.866.20.10.18.1.9.1.9 |
fmOspfStandardVirtIfStatusOSPF Virtual Interface Status. This variable
displays the validity or invalidity of the entry.
Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect (row
removal) is implementation dependent.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.9.1.10 |
fmOspfStandardNbrTableA table of non-virtual neighbor information. SEQUENCE OF FmOspfStandardNbrEntry .1.3.6.1.4.1.866.20.10.18.1.10 |
fmOspfStandardNbrEntryAn entry of fmOspfStandardNbrTable. FmOspfStandardNbrEntry .1.3.6.1.4.1.866.20.10.18.1.10.1 |
fmOspfStandardNbrIpAddressOSPF Neighbor Ip Address. The IP address of this
neighbor.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.10.1.1 |
fmOspfStandardNbrAddressLessIndexOSPF Neighbor Address Less Index. On an interface
having an IP Address, zero. On addressless
interfaces, the corresponding value of ifIndex in
the Internet Standard MIB. On row creation, this
can be derived from the instance.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.10.1.2 |
fmOspfStandardNbrRtrIdOSPF Neighbor Router Id. A 32-bit integer
(represented as a type IpAddress) uniquely
identifying the neighboring router in the
Autonomous System.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.10.1.3 |
fmOspfStandardNbrOptionsOSPF Neighbor Options. A Bit Mask corresponding to
the neighbor's options field. Bit 0, if set,
indicates that the area accepts and operates on
external information; if zero, it is a stub area.
Bit 1, if set, indicates that the system will
operate on Type of Service metrics other than TOS
0. If zero, the neighbor will ignore all metrics
except the TOS 0 metric.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.10.1.4 |
fmOspfStandardNbrPriorityOSPF Neighbor Priority. The priority of this
neighbor in the designated router election
algorithm. The value 0 signifies that the neighbor
is not eligible to become the designated router on
this particular network.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.10.1.5 |
fmOspfStandardNbrStateOSPF Neighbor State. The State of the relationship
with this Neighbor.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.10.1.6 |
fmOspfStandardNbrEventsOSPF Neighbor Events. The number of times this
neighbor relationship has changed state, or an
error has occurred.ro Counter .1.3.6.1.4.1.866.20.10.18.1.10.1.7 |
fmOspfStandardNbrLSRetransQLenOSPF Neighbor LS Retransmit Queue Length. The
current length of the retransmission queue.ro Gauge .1.3.6.1.4.1.866.20.10.18.1.10.1.8 |
fmOspfStandardNBMANbrStatusOSPF Neighbor Status. This variable displays the
validity or invalidity of the entry. Setting it to
'invalid' has the effect of rendering it
inoperative. The internal effect (row removal) is
implementation dependent.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.10.1.9 |
fmOspfStandardVirtNbrTableA table of virtual neighbor information. SEQUENCE OF FmOspfStandardVirtNbrEntry .1.3.6.1.4.1.866.20.10.18.1.11 |
fmOspfStandardVirtNbrEntryAn entry of fmOspfStandardVirtNbrTable. FmOspfStandardVirtNbrEntry .1.3.6.1.4.1.866.20.10.18.1.11.1 |
fmOspfStandardVirtNbrAreaOSPF Virtual Neighbor Area. The Transit Area
Identifier.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.11.1.1 |
fmOspfStandardVirtNbrRtrIdOSPF Virtual Neighbor Router Id. A 32-bit integer
uniquely identifying the neighboring router in the
Autonomous System.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.11.1.2 |
fmOspfStandardVirtNbrIpAddrOSPF Virtual Neighbor Ip Address. The IP address
this Virtual Neighbor is using.ro IpAddress .1.3.6.1.4.1.866.20.10.18.1.11.1.3 |
fmOspfStandardVirtNbrOptionsOSPF Virtual Neighbor Options. A bit map
corresponding to the neighbor's options field.
Thus, Bit 1, if set, indicates that the neighbor
supports Type of Service Routing; if zero, no
metrics other than TOS 0 are in use by the
neighbor.ro INTEGER .1.3.6.1.4.1.866.20.10.18.1.11.1.4 |
fmOspfStandardVirtNbrStateOSPF Virtual Neighbor State. The state of the
Virtual Neighbor Relationship.ro Enumeration .1.3.6.1.4.1.866.20.10.18.1.11.1.5 |
fmOspfStandardVirtNbrEventsOSPF Virtual Neighbor Events. The number of times
this virtual link has changed its state, or an
error has occurred.ro Counter .1.3.6.1.4.1.866.20.10.18.1.11.1.6 |
fmOspfStandardVirtNbrLSRetransQLenOSPF Virtual Neighbor LS Retransmit Queue Length.
The current length of the retransmission queue.ro Gauge .1.3.6.1.4.1.866.20.10.18.1.11.1.7 |
fmUsersRights OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.20 |
fmuVersionRight OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.20.1 |
fmuVersMaxVersion max autoriseero INTEGER .1.3.6.1.4.1.866.20.10.20.1.1 |
fmuLineAccess OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.20.5 |
fmuAccessLineNbMaxNombre max de lignes autorisesro INTEGER .1.3.6.1.4.1.866.20.10.20.5.1 |
fmuAccessX25PlsLineNbMaxNombre max de lignes X25 PLSro INTEGER .1.3.6.1.4.1.866.20.10.20.5.2 |
fmuAccessX25MlpLineNbMaxNombre max de lignes X25 MLPro INTEGER .1.3.6.1.4.1.866.20.10.20.5.3 |
fmuAccessAsynLineNbMaxNombre max de lignes Asynro INTEGER .1.3.6.1.4.1.866.20.10.20.5.4 |
fmuAccessVipLineNbMaxNombre max de lignes VIPro INTEGER .1.3.6.1.4.1.866.20.10.20.5.5 |
fmuAccessSdlcLineNbMaxNombre max de lignes SDLCro INTEGER .1.3.6.1.4.1.866.20.10.20.5.6 |
fmuAccessBsc3270LineNbMaxNombre max de lignes BSC 3270ro INTEGER .1.3.6.1.4.1.866.20.10.20.5.7 |
fmuAccessBsc2780LineNbMaxNombre max de lignes BSC 2780/3780ro INTEGER .1.3.6.1.4.1.866.20.10.20.5.8 |
fmuAccessBscTranspLineNbMaxNombre max de lignes BSC transparentro INTEGER .1.3.6.1.4.1.866.20.10.20.5.9 |
fmuAccessRnisChannelBNbMaxNombre de canaux B avec signalisationro INTEGER .1.3.6.1.4.1.866.20.10.20.5.10 |
fmuAccessRnisChannelDNbMaxNombre de canaux Dro INTEGER .1.3.6.1.4.1.866.20.10.20.5.11 |
fmuAccessHdlcTranspLineNbMaxNombre de lignes HDLC transparentro INTEGER .1.3.6.1.4.1.866.20.10.20.5.12 |
fmuAccessFrSuscribLineNbMaxNombre de lignes Frame Relay abonnero INTEGER .1.3.6.1.4.1.866.20.10.20.5.13 |
fmuAccessFrPublicNetworkLineNbMaxNombre de lignes Frame Relay parmi FRSE FRTE FRCEro INTEGER .1.3.6.1.4.1.866.20.10.20.5.14 |
fmuAccessFrseLineNbMaxNombre max de lignes FR SEro INTEGER .1.3.6.1.4.1.866.20.10.20.5.15 |
fmuAccessX29ReroutLineNbMaxNombre de lignes avec reroutage X29ro INTEGER .1.3.6.1.4.1.866.20.10.20.5.16 |
fmuAccessCvfLineNbMaxNombre de lignes abonnees CVFro INTEGER .1.3.6.1.4.1.866.20.10.20.5.17 |
fmuAccessX75LineNbMaxNombre max de lignes X75ro INTEGER .1.3.6.1.4.1.866.20.10.20.5.18 |
fmuAccessPaviLineNbMaxNombre max de lignes PAVIro INTEGER .1.3.6.1.4.1.866.20.10.20.5.19 |
fmuAccessX28PlusLineNbMaxNombre max de lignes X28 Plusro INTEGER .1.3.6.1.4.1.866.20.10.20.5.20 |
fmuAccessPadLineNbMaxNombre max de lignes PAD multinormesro INTEGER .1.3.6.1.4.1.866.20.10.20.5.21 |
fmuAccessPppaLineNbMaxNombre max de lignes PPPAro INTEGER .1.3.6.1.4.1.866.20.10.20.5.22 |
fmuAccessPppsLineNbMaxNombre max de lignes PPPSro INTEGER .1.3.6.1.4.1.866.20.10.20.5.23 |
fmuFunctionRight OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.20.10 |
fmuFunctionRouterAndBridgeComlan bridge ou routeurro Enumeration .1.3.6.1.4.1.866.20.10.20.10.1 |
fmuFunctionMemTypeForMCXType4Types de memoires (MCX type 4)ro Enumeration .1.3.6.1.4.1.866.20.10.20.10.2 |
fmuFunctionAccessFrProtocoAutorisation protocoles FRSNA FRIP FRI FRTro INTEGER .1.3.6.1.4.1.866.20.10.20.10.3 |
fmuFunctionBridgeAndStpFonction Pont et STPro Enumeration .1.3.6.1.4.1.866.20.10.20.10.4 |
fmuFunctionIpRouterFonction Routeur IPro Enumeration .1.3.6.1.4.1.866.20.10.20.10.5 |
fmuFunctionIpxRouterFonction Routeur IPXro Enumeration .1.3.6.1.4.1.866.20.10.20.10.6 |
fmuFunctionClnpRouterFonction Routeur CLNPro Enumeration .1.3.6.1.4.1.866.20.10.20.10.7 |
fmuFunctionLz77CompressionCompression LZ77ro Enumeration .1.3.6.1.4.1.866.20.10.20.10.8 |
fmuFunctionLz78CompressionCompression LZ78ro Enumeration .1.3.6.1.4.1.866.20.10.20.10.9 |
fmuFunctionSecurCardDroit securisero Enumeration .1.3.6.1.4.1.866.20.10.20.10.10 |
fmuFunctionLoadStatStatistiques de chargero Enumeration .1.3.6.1.4.1.866.20.10.20.10.11 |
fmuFunctionOverflowRescSecours-debordementro Enumeration .1.3.6.1.4.1.866.20.10.20.10.12 |
fmuFunctionPaePAEro Enumeration .1.3.6.1.4.1.866.20.10.20.10.13 |
fmuFunctionOnlineFileTransferTransfert de fichiers on linero Enumeration .1.3.6.1.4.1.866.20.10.20.10.14 |
fmuFunctionDPacketPaquet dans Dro Enumeration .1.3.6.1.4.1.866.20.10.20.10.15 |
fmuFunctionExploitMibUseDroits d'utilisation de la MIB exploitationro Enumeration .1.3.6.1.4.1.866.20.10.20.10.16 |
fmuFunctionLlcOnEthernetAutorisation LLC sur Ethernetro Enumeration .1.3.6.1.4.1.866.20.10.20.10.17 |
fmHardwareId OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.25 |
fmhTechnicalsFeatures OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.25.1 |
fmhTechnicEquipmTypeType de machinero Enumeration .1.3.6.1.4.1.866.20.10.25.1.1 |
fmhTechnicLineNbNombre de lignesro INTEGER .1.3.6.1.4.1.866.20.10.25.1.2 |
fmhTechnicPromFlashSizeTaille de la PROM Flashro Enumeration .1.3.6.1.4.1.866.20.10.25.1.3 |
fmhTechnicRamSizeTaille de la RAMro Enumeration .1.3.6.1.4.1.866.20.10.25.1.4 |
fmhTechnicEepromSizeTaille de l'EEPROMro Enumeration .1.3.6.1.4.1.866.20.10.25.1.5 |
fmhTechnicTransputerPresencePresence Transputerro Enumeration .1.3.6.1.4.1.866.20.10.25.1.6 |
fmhTechnicEthernetPresencePresence Ethernetro Enumeration .1.3.6.1.4.1.866.20.10.25.1.7 |
fmhTechnicTokenRingPresencePresence Token Ringro Enumeration .1.3.6.1.4.1.866.20.10.25.1.8 |
fmhTechnicMacAdressAdresse MACro OCTET STRING .1.3.6.1.4.1.866.20.10.25.1.9 |
fmhEquipmentId OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.25.5 |
fmhEqIdReferenceReference de l'equipementro INTEGER .1.3.6.1.4.1.866.20.10.25.5.1 |
fmhEqIdSerialNbEncodingTypeType de codage du numero de serie de l'equipementro Enumeration .1.3.6.1.4.1.866.20.10.25.5.2 |
fmhEqIdSerialNbNumero de serie de l'equipementro OCTET STRING .1.3.6.1.4.1.866.20.10.25.5.3 |
fmhEqIdFactoryReleaseDateDate de sortie d'usinero OCTET STRING .1.3.6.1.4.1.866.20.10.25.5.4 |
fmhEqIdFirstFactoryReturnDatePremiere date de retour usinero OCTET STRING .1.3.6.1.4.1.866.20.10.25.5.5 |
fmhEqIdSecondFactoryReturnDateDeuxieme date de retour usinero OCTET STRING .1.3.6.1.4.1.866.20.10.25.5.6 |
fmhEqIdThirdFactoryReturnDateTroisieme date de retour usinero OCTET STRING .1.3.6.1.4.1.866.20.10.25.5.7 |
fmhEqIdFourthFactoryReturnDateQuatrieme date de retour usinero OCTET STRING .1.3.6.1.4.1.866.20.10.25.5.8 |
fmhEqIdFifthFactoryReturnDateCinquieme date de retour usinero OCTET STRING .1.3.6.1.4.1.866.20.10.25.5.9 |
fmhE1S2ModuleDescription OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.25.10 |
fmhE1S2ModDescSoftwareVersionVersion logiciellero DisplayString .1.3.6.1.4.1.866.20.10.25.10.1 |
fmhE1S2ModDescHardwareVersionVersion materiellero DisplayString .1.3.6.1.4.1.866.20.10.25.10.2 |
fmsInverseArp OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.26 |
fmsInArpVirtualPortTable SEQUENCE OF FmsInArpVirtualPortEntry .1.3.6.1.4.1.866.20.10.26.1 |
fmsInArpVirtualPortEntryAn entry of fmsInArpVirtualPortTable. FmsInArpVirtualPortEntry .1.3.6.1.4.1.866.20.10.26.1.1 |
fmsInArpVpConnX121X121 address on which an inverse ARP has been done.ro OCTET STRING .1.3.6.1.4.1.866.20.10.26.1.1.1 |
fmsInArpVpVirtualPortIdVirtual Port Identifier of the Inverse ARP
statistic.ro INTEGER .1.3.6.1.4.1.866.20.10.26.1.1.2 |
fmsInArpVpOutRequestsNumber of Inverse ARP request sent on this
connection.ro Counter .1.3.6.1.4.1.866.20.10.26.1.1.3 |
fmsInArpVpInResponsesNumber of Inverse ARP reply received on the
connection.ro Counter .1.3.6.1.4.1.866.20.10.26.1.1.4 |
fmsInArpVpInRequestsNumber of Inverse ARP request received on the
connection.ro Counter .1.3.6.1.4.1.866.20.10.26.1.1.5 |
fmsInArpVpOutResponsesNumber of Inverse ARP reply sent on the connection.ro Counter .1.3.6.1.4.1.866.20.10.26.1.1.6 |
fmsInArpVpInverseArpStatusState of the inverse ARP resolution.ro Enumeration .1.3.6.1.4.1.866.20.10.26.1.1.7 |
fmsInArpVpRemoteIpAddrAssociated remote IP address.ro IpAddress .1.3.6.1.4.1.866.20.10.26.1.1.8 |
fmsInArpVpLocalIpAddrAssociated local IP address.ro IpAddress .1.3.6.1.4.1.866.20.10.26.1.1.9 |
fmsBootP OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.27 |
fmsBootPClient OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.10.27.1 |
fmsBootPClientStatusThe value of this object identifies result of
BootP transaction.ro Enumeration .1.3.6.1.4.1.866.20.10.27.1.1 |
fmsBootPClientFileNameThe value of this object identifies the file name
received after bootreply reception.ro DisplayString .1.3.6.1.4.1.866.20.10.27.1.2 |
fmsBootPClientServerIpAddrThe value of this object identifies the server IP
address which has contacted bootp client manager.ro IpAddress .1.3.6.1.4.1.866.20.10.27.1.3 |
fmsBootPClientGatewayIpAddrThe value of this object identifies the gateway IP
address. This field is used in optional
cross-gateway booting.ro IpAddress .1.3.6.1.4.1.866.20.10.27.1.4 |
fmsBootPRelayTableThis table describes the parameters used in BootP
Relay mode. It gives statistics of BootP packets
transfers. SEQUENCE OF FmsBootPRelayEntry .1.3.6.1.4.1.866.20.10.27.10 |
fmsBootPRelayEntryAn entry of fmsBootPRelayTable. FmsBootPRelayEntry .1.3.6.1.4.1.866.20.10.27.10.1 |
fmsBootPRelayVirtualPortIdThe value of this object identifies the Virtual
Port Identifier of BootP Relay statistic.ro INTEGER .1.3.6.1.4.1.866.20.10.27.10.1.1 |
fmsBootPRelayRelayedPktsThe value of this object identifies the number of
packets routed by gateway in the case of BootP
Relay mode.ro Counter .1.3.6.1.4.1.866.20.10.27.10.1.2 |
fmsBootPRelayDroppedPktsThe value of this object identifies the number of
destroyed packets.ro Counter .1.3.6.1.4.1.866.20.10.27.10.1.3 |
fmsBootPRelayRecRequestsThe value of this object identifies the number of
received packets.ro Counter .1.3.6.1.4.1.866.20.10.27.10.1.4 |
fmsBootPRelayRecRepliesThe value of this object identifies the number of
received responses.ro Counter .1.3.6.1.4.1.866.20.10.27.10.1.5 |
frxDiagnostic OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.20 |
fdPhysicalPorts OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.20.10 |
fdpIdentification OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.20.10.1 |
fdpIdentPhysPortIdThe value of this object is the physical port
number. This value may be modified only if
fdpIdentPhysPortState is 'notConfigured', 'up' or
'down'.rw INTEGER .1.3.6.1.4.1.866.20.20.10.1.1 |
fdpIdentPhysPortStateThe value of this object is the state of the
physical port identified by fdpIdentPhysPortId.ro Enumeration .1.3.6.1.4.1.866.20.20.10.1.3 |
fdpControl OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.20.10.2 |
fdpCtrlCommandThe value of this object is the desired state of
the physical port described in fdpIdentPhysPortId.
The equipment answers always with the value
'ready' to a GetRequest on this object.rw Enumeration .1.3.6.1.4.1.866.20.20.10.2.1 |
fdpCtrlDiagCodeThe value of this object is the result of the
last SET on fdpCtrlCommand.ro Enumeration .1.3.6.1.4.1.866.20.20.10.2.10 |
fdpTest OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.20.10.3 |
fdpTestLoopBackTypeThe value of this object is the desired loop type
run on the physical port described in
fdpIdentPhysPortId.rw Enumeration .1.3.6.1.4.1.866.20.20.10.3.1 |
fdpTestOutputPacketsCountThe value of this object is the maximum number of
messages to be sent during the test. '0' means
'infinite'.rw INTEGER .1.3.6.1.4.1.866.20.20.10.3.2 |
fdpTestMaxDurationThe value of this object is the maximum duration
of the test in seconds.rw INTEGER .1.3.6.1.4.1.866.20.20.10.3.3 |
fdpTestCommandThe value of this object permits to start or stop
the loop test described in fdpTestLoopBackType,
fdpTestOutputPacketsCount and fdpTestMaxDuration.
The equipment answers always with the value
'ready' to a GetRequest on this object.rw Enumeration .1.3.6.1.4.1.866.20.20.10.3.4 |
fdpTestDiagCodeThe value of this object is the result of the
last SET on fdpTestCommand.ro Enumeration .1.3.6.1.4.1.866.20.20.10.3.10 |
fdpTestStateThe value of this object is the state of the last
test started.ro Enumeration .1.3.6.1.4.1.866.20.20.10.3.11 |
fdpTestOutPktsCounterThe value of this object is the number of
messages sent during the test.ro INTEGER .1.3.6.1.4.1.866.20.20.10.3.12 |
fdpTestInPktsCounterThe value of this object is the number of
messages received during the test.ro INTEGER .1.3.6.1.4.1.866.20.20.10.3.13 |
fdpTestInErrPktsCounterThe value of this object is the number of
incorrect messages received during the test.ro INTEGER .1.3.6.1.4.1.866.20.20.10.3.14 |
fdpTestInErrOctetsCounterThe value of this object is the number of
incorrect characters received during the test.ro INTEGER .1.3.6.1.4.1.866.20.20.10.3.15 |
fdpModemManagement OBJECT IDENTIFIER .1.3.6.1.4.1.866.20.20.10.4 |
fdpModCommandThe value of this object permits to open or close
a session with a modem connected on the physical
port described in fdpIdentPhysPortId. The
equipment answers always with the value 'ready' to
a GetRequest on this object.rw Enumeration .1.3.6.1.4.1.866.20.20.10.4.1 |
fdpModControlDataThe value of this object is AT Commands to be
sent to the modemrw DisplayString .1.3.6.1.4.1.866.20.20.10.4.2 |
fdpModDiagCodeThe value of this object is the result of the
last SET on fdpModCommand or fdpModControlData.
The value 'modemData' means that the modem has
sent one or several responses which may be seen in
fdpModResponseTable.ro Enumeration .1.3.6.1.4.1.866.20.20.10.4.10 |
fdpModResponseTableThis table contents the result of the last AT
commands described in fdpModControlData. SEQUENCE OF FdpModResponseEntry .1.3.6.1.4.1.866.20.20.10.4.15 |
fdpModResponseEntryAn entry of fdpModResponseTable. FdpModResponseEntry .1.3.6.1.4.1.866.20.20.10.4.15.1 |
fdpModRespEltNumThe value of this object is the identifier of one
text line of a response of the modem.ro INTEGER .1.3.6.1.4.1.866.20.20.10.4.15.1.1 |
fdpModRespElementThe value of this object contains the ASCII
characters of this text line.ro DisplayString .1.3.6.1.4.1.866.20.20.10.4.15.1.2 |
vcxSoftware OBJECT IDENTIFIER .1.3.6.1.4.1.866.30 |
vcxConfig OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1 |
vcControl OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.1 |
vcCtlDaterw OCTET STRING .1.3.6.1.4.1.866.30.1.1.1 |
vcCtlHourrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.30.1.1.2 |
vcCtlConfigComrw Enumeration .1.3.6.1.4.1.866.30.1.1.3 |
vcCtlConfigLoadrw INTEGER .1.3.6.1.4.1.866.30.1.1.4 |
vcCtlErrorTable SEQUENCE OF VcCtlErrorEntry .1.3.6.1.4.1.866.30.1.1.10 |
vcCtlErrorEntryAn entry of vcCtlErrorTable. VcCtlErrorEntry .1.3.6.1.4.1.866.30.1.1.10.1 |
vcCtlErrorIndexro INTEGER .1.3.6.1.4.1.866.30.1.1.10.1.1 |
vcCtlErrorCodero INTEGER .1.3.6.1.4.1.866.30.1.1.10.1.2 |
vcCtlErrorMessagero DisplayString .1.3.6.1.4.1.866.30.1.1.10.1.3 |
vcCtlErrorTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.30.1.1.10.1.4 |
vcSystem OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.5 |
vcSysConfActiverw Enumeration .1.3.6.1.4.1.866.30.1.5.1 |
vcSysConfDatero OCTET STRING .1.3.6.1.4.1.866.30.1.5.2 |
vcSysConfHourro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.30.1.5.3 |
vcManagement OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.10 |
vcmAlrmGenTable SEQUENCE OF VcmAlrmGenEntry .1.3.6.1.4.1.866.30.1.10.1 |
vcmAlrmGenEntryAn entry of vcmAlrmGenTable. VcmAlrmGenEntry .1.3.6.1.4.1.866.30.1.10.1.1 |
vcmAlrmGenFamilyIdro Enumeration .1.3.6.1.4.1.866.30.1.10.1.1.1 |
vcmAlrmGenTypro Enumeration .1.3.6.1.4.1.866.30.1.10.1.1.2 |
vcmAlrmGenTrapSendrw Enumeration .1.3.6.1.4.1.866.30.1.10.1.1.3 |
vcmAlrmGenDisplayrw Enumeration .1.3.6.1.4.1.866.30.1.10.1.1.4 |
vcmAlrmSCTable SEQUENCE OF VcmAlrmSCEntry .1.3.6.1.4.1.866.30.1.10.2 |
vcmAlrmSCEntryAn entry of vcmAlrmSCTable. VcmAlrmSCEntry .1.3.6.1.4.1.866.30.1.10.2.1 |
vcmAlrmSCFamilyIdro Enumeration .1.3.6.1.4.1.866.30.1.10.2.1.1 |
vcmAlrmSCTypro Enumeration .1.3.6.1.4.1.866.30.1.10.2.1.2 |
vcmAlrmSCTrapSendrw Enumeration .1.3.6.1.4.1.866.30.1.10.2.1.3 |
vcmAlrmSCDisplayrw Enumeration .1.3.6.1.4.1.866.30.1.10.2.1.4 |
vcmAlrmVCTable SEQUENCE OF VcmAlrmVCEntry .1.3.6.1.4.1.866.30.1.10.3 |
vcmAlrmVCEntryAn entry of vcmAlrmVCTable. VcmAlrmVCEntry .1.3.6.1.4.1.866.30.1.10.3.1 |
vcmAlrmVCFamilyIdro Enumeration .1.3.6.1.4.1.866.30.1.10.3.1.1 |
vcmAlrmVCTypro Enumeration .1.3.6.1.4.1.866.30.1.10.3.1.2 |
vcmAlrmVCTrapSendrw Enumeration .1.3.6.1.4.1.866.30.1.10.3.1.3 |
vcmAlrmVCDisplayrw Enumeration .1.3.6.1.4.1.866.30.1.10.3.1.4 |
vcmAlrmLMITable SEQUENCE OF VcmAlrmLMIEntry .1.3.6.1.4.1.866.30.1.10.4 |
vcmAlrmLMIEntryAn entry of vcmAlrmLMITable. VcmAlrmLMIEntry .1.3.6.1.4.1.866.30.1.10.4.1 |
vcmAlrmLMIFamilyIdro Enumeration .1.3.6.1.4.1.866.30.1.10.4.1.1 |
vcmAlrmLMITypro Enumeration .1.3.6.1.4.1.866.30.1.10.4.1.2 |
vcmAlrmLMITrapSendrw Enumeration .1.3.6.1.4.1.866.30.1.10.4.1.3 |
vcmAlrmLMIDisplayrw Enumeration .1.3.6.1.4.1.866.30.1.10.4.1.4 |
vcmAlrmSwTable SEQUENCE OF VcmAlrmSwEntry .1.3.6.1.4.1.866.30.1.10.5 |
vcmAlrmSwEntryAn entry of vcmAlrmSwTable. VcmAlrmSwEntry .1.3.6.1.4.1.866.30.1.10.5.1 |
vcmAlrmSwFamilyIdro Enumeration .1.3.6.1.4.1.866.30.1.10.5.1.1 |
vcmAlrmSwTypro Enumeration .1.3.6.1.4.1.866.30.1.10.5.1.2 |
vcmAlrmSwTrapSendrw Enumeration .1.3.6.1.4.1.866.30.1.10.5.1.3 |
vcmAlrmSwDisplayrw Enumeration .1.3.6.1.4.1.866.30.1.10.5.1.4 |
vcmAlrmCmpTable SEQUENCE OF VcmAlrmCmpEntry .1.3.6.1.4.1.866.30.1.10.6 |
vcmAlrmCmpEntryAn entry of vcmAlrmCmpTable. VcmAlrmCmpEntry .1.3.6.1.4.1.866.30.1.10.6.1 |
vcmAlrmCmpFamilyIdro Enumeration .1.3.6.1.4.1.866.30.1.10.6.1.1 |
vcmAlrmCmpTypro Enumeration .1.3.6.1.4.1.866.30.1.10.6.1.2 |
vcmAlrmCmpTrapSendrw Enumeration .1.3.6.1.4.1.866.30.1.10.6.1.3 |
vcmAlrmCmpDisplayrw Enumeration .1.3.6.1.4.1.866.30.1.10.6.1.4 |
vcmAlrmFaxTable SEQUENCE OF VcmAlrmFaxEntry .1.3.6.1.4.1.866.30.1.10.7 |
vcmAlrmFaxEntryAn entry of vcmAlrmFaxTable. VcmAlrmFaxEntry .1.3.6.1.4.1.866.30.1.10.7.1 |
vcmAlrmFaxFamilyIdro Enumeration .1.3.6.1.4.1.866.30.1.10.7.1.1 |
vcmAlrmFaxTypro Enumeration .1.3.6.1.4.1.866.30.1.10.7.1.2 |
vcmAlrmFaxTrapSendrw Enumeration .1.3.6.1.4.1.866.30.1.10.7.1.3 |
vcmAlrmFaxDisplayrw Enumeration .1.3.6.1.4.1.866.30.1.10.7.1.4 |
vcmAlrmTftpTable SEQUENCE OF VcmAlrmTftpEntry .1.3.6.1.4.1.866.30.1.10.8 |
vcmAlrmTftpEntryAn entry of vcmAlrmTftpTable. VcmAlrmTftpEntry .1.3.6.1.4.1.866.30.1.10.8.1 |
vcmAlrmTftpFamilyIdro Enumeration .1.3.6.1.4.1.866.30.1.10.8.1.1 |
vcmAlrmTftpTypro Enumeration .1.3.6.1.4.1.866.30.1.10.8.1.2 |
vcmAlrmTftpTrapSendrw Enumeration .1.3.6.1.4.1.866.30.1.10.8.1.3 |
vcmAlrmTftpDisplayrw Enumeration .1.3.6.1.4.1.866.30.1.10.8.1.4 |
vcmAlrmSvcTable SEQUENCE OF VcmAlrmSvcEntry .1.3.6.1.4.1.866.30.1.10.9 |
vcmAlrmSvcEntryAn entry of vcmAlrmSvcTable. VcmAlrmSvcEntry .1.3.6.1.4.1.866.30.1.10.9.1 |
vcmAlrmSvcFamilyIdro Enumeration .1.3.6.1.4.1.866.30.1.10.9.1.1 |
vcmAlrmSvcTypro Enumeration .1.3.6.1.4.1.866.30.1.10.9.1.2 |
vcmAlrmSvcTrapSendrw Enumeration .1.3.6.1.4.1.866.30.1.10.9.1.3 |
vcmAlrmSvcDisplayrw Enumeration .1.3.6.1.4.1.866.30.1.10.9.1.4 |
vcInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.15 |
vcfPhysicalPortTable SEQUENCE OF VcfPhysicalPortEntry .1.3.6.1.4.1.866.30.1.15.1 |
vcfPhysicalPortEntryAn entry of vcfPhysicalPortTable. VcfPhysicalPortEntry .1.3.6.1.4.1.866.30.1.15.1.1 |
vcfPhysPortIdro Enumeration .1.3.6.1.4.1.866.30.1.15.1.1.1 |
vcfPhysPortConnectorro Enumeration .1.3.6.1.4.1.866.30.1.15.1.1.2 |
vcfNumericLines OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.15.5 |
vcfNumericLineTable SEQUENCE OF VcfNumericLineEntry .1.3.6.1.4.1.866.30.1.15.5.1 |
vcfNumericLineEntryAn entry of vcfNumericLineTable. VcfNumericLineEntry .1.3.6.1.4.1.866.30.1.15.5.1.1 |
vcfNumericLineInterfaceIdro Enumeration .1.3.6.1.4.1.866.30.1.15.5.1.1.1 |
vcfNumericLineTypero Enumeration .1.3.6.1.4.1.866.30.1.15.5.1.1.2 |
vcfDataLineTable SEQUENCE OF VcfDataLineEntry .1.3.6.1.4.1.866.30.1.15.5.2 |
vcfDataLineEntryAn entry of vcfDataLineTable. VcfDataLineEntry .1.3.6.1.4.1.866.30.1.15.5.2.1 |
vcfDataLineInterfaceIdro Enumeration .1.3.6.1.4.1.866.30.1.15.5.2.1.1 |
vcfDataLineRaterw Enumeration .1.3.6.1.4.1.866.30.1.15.5.2.1.2 |
vcfDataLineRts105rw Enumeration .1.3.6.1.4.1.866.30.1.15.5.2.1.3 |
vcfDataLineDtr108rw Enumeration .1.3.6.1.4.1.866.30.1.15.5.2.1.4 |
vcfDataLineCts106rw Enumeration .1.3.6.1.4.1.866.30.1.15.5.2.1.5 |
vcfDataLineDsr107rw Enumeration .1.3.6.1.4.1.866.30.1.15.5.2.1.6 |
vcfDataLineDcd109rw Enumeration .1.3.6.1.4.1.866.30.1.15.5.2.1.7 |
vcfConfLineTable SEQUENCE OF VcfConfLineEntry .1.3.6.1.4.1.866.30.1.15.5.3 |
vcfConfLineEntryAn entry of vcfConfLineTable. VcfConfLineEntry .1.3.6.1.4.1.866.30.1.15.5.3.1 |
vcfConfLineInterfaceIdro Enumeration .1.3.6.1.4.1.866.30.1.15.5.3.1.1 |
vcfConfLineRatero Enumeration .1.3.6.1.4.1.866.30.1.15.5.3.1.2 |
vcFrameRelaySw OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.20 |
vcFrSwitchingTable SEQUENCE OF VcFrSwitchingEntry .1.3.6.1.4.1.866.30.1.20.1 |
vcFrSwitchingEntryAn entry of vcFrSwitchingTable. VcFrSwitchingEntry .1.3.6.1.4.1.866.30.1.20.1.1 |
vcFrSwL0Dlciro INTEGER .1.3.6.1.4.1.866.30.1.20.1.1.1 |
vcFrSwL1Dlciro INTEGER .1.3.6.1.4.1.866.30.1.20.1.1.2 |
vcFrSwStatusrw Enumeration .1.3.6.1.4.1.866.30.1.20.1.1.3 |
vcFrSwL0DlciPriorityrw Enumeration .1.3.6.1.4.1.866.30.1.20.1.1.4 |
vcFrSwL0MuxEnablerw Enumeration .1.3.6.1.4.1.866.30.1.20.1.1.5 |
vcFrSwL0ChanelIdentifierCIDrw INTEGER .1.3.6.1.4.1.866.30.1.20.1.1.6 |
vcFrSwL1DlciPriorityrw Enumeration .1.3.6.1.4.1.866.30.1.20.1.1.7 |
vcFrSwL1MuxEnablerw Enumeration .1.3.6.1.4.1.866.30.1.20.1.1.8 |
vcFrSwL1ChanelIdentifierCIDrw INTEGER .1.3.6.1.4.1.866.30.1.20.1.1.9 |
vcLogicalPorts OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.25 |
vclLogicalPortTable SEQUENCE OF VclLogicalPortEntry .1.3.6.1.4.1.866.30.1.25.1 |
vclLogicalPortEntryAn entry of vclLogicalPortTable. VclLogicalPortEntry .1.3.6.1.4.1.866.30.1.25.1.1 |
vclLogPortIdro INTEGER .1.3.6.1.4.1.866.30.1.25.1.1.1 |
vclLogPortStatusrw Enumeration .1.3.6.1.4.1.866.30.1.25.1.1.2 |
vclLogPortTyperw Enumeration .1.3.6.1.4.1.866.30.1.25.1.1.3 |
vclHdlcAccessLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.25.5 |
vclHdlcLogPortTable SEQUENCE OF VclHdlcLogPortEntry .1.3.6.1.4.1.866.30.1.25.5.1 |
vclHdlcLogPortEntryAn entry of vclHdlcLogPortTable. VclHdlcLogPortEntry .1.3.6.1.4.1.866.30.1.25.5.1.1 |
vclHdlcLpLogPortIdro INTEGER .1.3.6.1.4.1.866.30.1.25.5.1.1.1 |
vclHdlcLpFragmentationLengthrw INTEGER .1.3.6.1.4.1.866.30.1.25.5.1.1.2 |
vclHdlcLpRemoteAddressrw OCTET STRING .1.3.6.1.4.1.866.30.1.25.5.1.1.3 |
vclFrameRelay OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.25.10 |
vclFrCommunicationEquipment OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.25.10.1 |
vclFrCeLogPortTable SEQUENCE OF VclFrCeLogPortEntry .1.3.6.1.4.1.866.30.1.25.10.1.1 |
vclFrCeLogPortEntryAn entry of vclFrCeLogPortTable. VclFrCeLogPortEntry .1.3.6.1.4.1.866.30.1.25.10.1.1.1 |
vclFrCeLpLogPortIdro INTEGER .1.3.6.1.4.1.866.30.1.25.10.1.1.1.1 |
vclFrCeLpInterfaceIdrw Enumeration .1.3.6.1.4.1.866.30.1.25.10.1.1.1.2 |
vclFrTerminalEquipment OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.25.10.2 |
vclFrTeLogPortTable SEQUENCE OF VclFrTeLogPortEntry .1.3.6.1.4.1.866.30.1.25.10.2.1 |
vclFrTeLogPortEntryAn entry of vclFrTeLogPortTable. VclFrTeLogPortEntry .1.3.6.1.4.1.866.30.1.25.10.2.1.1 |
vclFrTeLpLogPortIdro INTEGER .1.3.6.1.4.1.866.30.1.25.10.2.1.1.1 |
vclFrTeLpInterfaceIdrw Enumeration .1.3.6.1.4.1.866.30.1.25.10.2.1.1.2 |
vclFrTeLpConfigIdro INTEGER .1.3.6.1.4.1.866.30.1.25.10.2.1.1.3 |
vclFrTeLpLmirw Enumeration .1.3.6.1.4.1.866.30.1.25.10.2.1.1.4 |
vclFrSwitchEquipment OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.25.10.3 |
vclFrSeLogPortTable SEQUENCE OF VclFrSeLogPortEntry .1.3.6.1.4.1.866.30.1.25.10.3.1 |
vclFrSeLogPortEntryAn entry of vclFrSeLogPortTable. VclFrSeLogPortEntry .1.3.6.1.4.1.866.30.1.25.10.3.1.1 |
vclFrSeLpLogPortIdro INTEGER .1.3.6.1.4.1.866.30.1.25.10.3.1.1.1 |
vclFrSeLpInterfaceIdrw Enumeration .1.3.6.1.4.1.866.30.1.25.10.3.1.1.2 |
vclFrSeLpConfigIdro INTEGER .1.3.6.1.4.1.866.30.1.25.10.3.1.1.3 |
vclFrConfigurationTe OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.25.10.4 |
vclFrLmiParameterTable SEQUENCE OF VclFrLmiParameterEntry .1.3.6.1.4.1.866.30.1.25.10.4.1 |
vclFrLmiParameterEntryAn entry of vclFrLmiParameterTable. VclFrLmiParameterEntry .1.3.6.1.4.1.866.30.1.25.10.4.1.1 |
vclFrLmiParaConfigIdro INTEGER .1.3.6.1.4.1.866.30.1.25.10.4.1.1.1 |
vclFrLmiParaDlcirw INTEGER .1.3.6.1.4.1.866.30.1.25.10.4.1.1.2 |
vclFrLmiParaStandardrw Enumeration .1.3.6.1.4.1.866.30.1.25.10.4.1.1.3 |
vclFrLmiParaAccessibilityConditionrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.4.1.1.4 |
vclFrLmiParaN391FullStatusPollCountrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.4.1.1.5 |
vclFrLmiParaN392ErrorThresholdrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.4.1.1.6 |
vclFrLmiParaN393MonitoredEventCountrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.4.1.1.7 |
vclFrLmiParaT391LinkIntegPollTimerrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.4.1.1.8 |
vclFrConfigurationSe OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.25.10.5 |
vclFrSeSignallingTable SEQUENCE OF VclFrSeSignallingEntry .1.3.6.1.4.1.866.30.1.25.10.5.1 |
vclFrSeSignallingEntryAn entry of vclFrSeSignallingTable. VclFrSeSignallingEntry .1.3.6.1.4.1.866.30.1.25.10.5.1.1 |
vclFrSeSigConfigIdro INTEGER .1.3.6.1.4.1.866.30.1.25.10.5.1.1.1 |
vclFrSeSigOuputTimeoutrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.5.1.1.2 |
vclFrSeSigSignalOutputWinSizerw INTEGER .1.3.6.1.4.1.866.30.1.25.10.5.1.1.3 |
vclFrSeSigN200RetransMaxCountrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.5.1.1.5 |
vclFrSeSigT200RetransTimerrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.5.1.1.6 |
vclFrSeSigT203InactivityTimerrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.5.1.1.7 |
vclFrSeSigT303SetupResponseTimerrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.5.1.1.8 |
vclFrSeSigT305DisconnectResponseTimerrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.5.1.1.9 |
vclFrSeSigT308ReleaseResponseTimerrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.5.1.1.10 |
vclFrSeSigT310CallProceedingTimerrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.5.1.1.11 |
vclFrSeSigT316RestartAcknowledgeTimerrw INTEGER .1.3.6.1.4.1.866.30.1.25.10.5.1.1.12 |
vcWanSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.30 |
vcwEquipParams OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.30.1 |
vcwEquipDnicZoAddrrw OCTET STRING .1.3.6.1.4.1.866.30.1.30.1.1 |
vcwEquipVoiceRoutingServicePortAddrrw OCTET STRING .1.3.6.1.4.1.866.30.1.30.1.2 |
vcwEquipIpVirtualPortAddrrw OCTET STRING .1.3.6.1.4.1.866.30.1.30.1.3 |
vcwEquipRemoteConfPortAddrrw OCTET STRING .1.3.6.1.4.1.866.30.1.30.1.4 |
vcwEquipVoiceVirtualPortAddrrw OCTET STRING .1.3.6.1.4.1.866.30.1.30.1.5 |
vcwEquipSVCDisconnectOnCongestionrw Enumeration .1.3.6.1.4.1.866.30.1.30.1.6 |
vcwEquipOutLogPortrw INTEGER .1.3.6.1.4.1.866.30.1.30.1.7 |
vcwABPvcLpTable SEQUENCE OF VcwABPvcLpEntry .1.3.6.1.4.1.866.30.1.30.2 |
vcwABPvcLpEntryAn entry of vcwABPvcLpTable. VcwABPvcLpEntry .1.3.6.1.4.1.866.30.1.30.2.1 |
vcwABPvcLpIdro INTEGER .1.3.6.1.4.1.866.30.1.30.2.1.1 |
vcwABPvcLpAddressrw OCTET STRING .1.3.6.1.4.1.866.30.1.30.2.1.2 |
vcwWanRouteTable SEQUENCE OF VcwWanRouteEntry .1.3.6.1.4.1.866.30.1.30.3 |
vcwWanRouteEntryAn entry of vcwWanRouteTable. VcwWanRouteEntry .1.3.6.1.4.1.866.30.1.30.3.1 |
vcwWanRouteDnicZoAddressro OCTET STRING .1.3.6.1.4.1.866.30.1.30.3.1.1 |
vcwWanRouteStatusrw Enumeration .1.3.6.1.4.1.866.30.1.30.3.1.2 |
vcwWanRouteLogPortIdrw INTEGER .1.3.6.1.4.1.866.30.1.30.3.1.3 |
vcVirtualPorts OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.35 |
vcvVirtualPortTable SEQUENCE OF VcvVirtualPortEntry .1.3.6.1.4.1.866.30.1.35.1 |
vcvVirtualPortEntryAn entry of vcvVirtualPortTable. VcvVirtualPortEntry .1.3.6.1.4.1.866.30.1.35.1.1 |
vcvVirtualPortIdro Enumeration .1.3.6.1.4.1.866.30.1.35.1.1.1 |
vcvIpVirtualPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.35.5 |
vcvIpLocalTable SEQUENCE OF VcvIpLocalEntry .1.3.6.1.4.1.866.30.1.35.5.1 |
vcvIpLocalEntryAn entry of vcvIpLocalTable. VcvIpLocalEntry .1.3.6.1.4.1.866.30.1.35.5.1.1 |
vcvIpLocVirtualPortIdro Enumeration .1.3.6.1.4.1.866.30.1.35.5.1.1.1 |
vcvIpLocAddressHostrw IpAddress .1.3.6.1.4.1.866.30.1.35.5.1.1.2 |
vcvIpLocSubNetMaskrw IpAddress .1.3.6.1.4.1.866.30.1.35.5.1.1.3 |
vcvIpLocMturo INTEGER .1.3.6.1.4.1.866.30.1.35.5.1.1.4 |
vcvIpLocRouteNextHoprw IpAddress .1.3.6.1.4.1.866.30.1.35.5.1.1.5 |
vcvIpLocMinimumRecallTimerrw INTEGER .1.3.6.1.4.1.866.30.1.35.5.1.1.6 |
vcvIpLocSvcClearCallTimerrw INTEGER .1.3.6.1.4.1.866.30.1.35.5.1.1.7 |
vcvIpLocSvcCallRetryCountrw INTEGER .1.3.6.1.4.1.866.30.1.35.5.1.1.8 |
vcvSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.35.5.5 |
vcvSnmpGen OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.35.5.5.1 |
vcvSnmpGenVirtualPortIdrw Enumeration .1.3.6.1.4.1.866.30.1.35.5.5.1.1 |
vcvSnmpGenCommunityStringReadOnlyrw DisplayString .1.3.6.1.4.1.866.30.1.35.5.5.1.2 |
vcvSnmpGenCommunityStringReadWriterw DisplayString .1.3.6.1.4.1.866.30.1.35.5.5.1.3 |
vcvSnmpGenCommunityStringTraprw DisplayString .1.3.6.1.4.1.866.30.1.35.5.5.1.4 |
vcvSnmpGenAuthenticationFailureTraprw Enumeration .1.3.6.1.4.1.866.30.1.35.5.5.1.5 |
vcvSnmpManagerTable SEQUENCE OF VcvSnmpManagerEntry .1.3.6.1.4.1.866.30.1.35.5.5.2 |
vcvSnmpManagerEntryAn entry of vcvSnmpManagerTable. VcvSnmpManagerEntry .1.3.6.1.4.1.866.30.1.35.5.5.2.1 |
vcvSnmpManagerIpAddressro IpAddress .1.3.6.1.4.1.866.30.1.35.5.5.2.1.1 |
vcvSnmpManagerStatusrw Enumeration .1.3.6.1.4.1.866.30.1.35.5.5.2.1.2 |
vcvSnmpManagerNamerw DisplayString .1.3.6.1.4.1.866.30.1.35.5.5.2.1.3 |
vcvSnmpManagerSendTrapsrw Enumeration .1.3.6.1.4.1.866.30.1.35.5.5.2.1.4 |
vcvSnmpManagerTrapsUdpPortrw INTEGER .1.3.6.1.4.1.866.30.1.35.5.5.2.1.5 |
vcvRemoteConfTable SEQUENCE OF VcvRemoteConfEntry .1.3.6.1.4.1.866.30.1.35.5.5.3 |
vcvRemoteConfEntryAn entry of vcvRemoteConfTable. VcvRemoteConfEntry .1.3.6.1.4.1.866.30.1.35.5.5.3.1 |
vcvRemoteConfNamero DisplayString .1.3.6.1.4.1.866.30.1.35.5.5.3.1.1 |
vcvRemoteConfStatusrw Enumeration .1.3.6.1.4.1.866.30.1.35.5.5.3.1.2 |
vcvRemoteConfWanAddressrw OCTET STRING .1.3.6.1.4.1.866.30.1.35.5.5.3.1.3 |
vcvTftpTable SEQUENCE OF VcvTftpEntry .1.3.6.1.4.1.866.30.1.35.5.10 |
vcvTftpEntryAn entry of vcvTftpTable. VcvTftpEntry .1.3.6.1.4.1.866.30.1.35.5.10.1 |
vcvTftpIpAddressro IpAddress .1.3.6.1.4.1.866.30.1.35.5.10.1.1 |
vcvTftpStatusrw Enumeration .1.3.6.1.4.1.866.30.1.35.5.10.1.2 |
vcvTftpNamerw DisplayString .1.3.6.1.4.1.866.30.1.35.5.10.1.3 |
vcvTftpRetryTimerrw INTEGER .1.3.6.1.4.1.866.30.1.35.5.10.1.4 |
vcvTftpInactTimerrw INTEGER .1.3.6.1.4.1.866.30.1.35.5.10.1.5 |
vcvRemoteNetToMediaTable SEQUENCE OF VcvRemoteNetToMediaEntry .1.3.6.1.4.1.866.30.1.35.5.15 |
vcvRemoteNetToMediaEntryAn entry of vcvRemoteNetToMediaTable. VcvRemoteNetToMediaEntry .1.3.6.1.4.1.866.30.1.35.5.15.1 |
vcvRemNetIpAddressro IpAddress .1.3.6.1.4.1.866.30.1.35.5.15.1.1 |
vcvRemNetStatusrw Enumeration .1.3.6.1.4.1.866.30.1.35.5.15.1.2 |
vcvRemNetWanAddressrw OCTET STRING .1.3.6.1.4.1.866.30.1.35.5.15.1.3 |
vcvRemNetEncapsulationrw Enumeration .1.3.6.1.4.1.866.30.1.35.5.15.1.4 |
vcvVoiceVirtualPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.35.10 |
vcvVoiceGen OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.35.10.1 |
vcvVoiceVirtualPortIdrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.1.1 |
vcvVoiceTransportTable SEQUENCE OF VcvVoiceTransportEntry .1.3.6.1.4.1.866.30.1.35.10.2 |
vcvVoiceTransportEntryAn entry of vcvVoiceTransportTable. VcvVoiceTransportEntry .1.3.6.1.4.1.866.30.1.35.10.2.1 |
vcvVoiceTransProfileIdrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.2.1.1 |
vcvVoiceTransEncapsulationModerw Enumeration .1.3.6.1.4.1.866.30.1.35.10.2.1.2 |
vcvVoiceTransMaxPayLoadNumberrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.2.1.3 |
vcvVoiceTransCompressionAlgorithmrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.2.1.4 |
vcvVoiceTransJitterCompensationrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.2.1.5 |
vcvVoiceTransVoicePacketsCombinationrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.2.1.6 |
vcvVoiceTransQosBcrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.2.1.7 |
vcvVoiceTransQosBerw Enumeration .1.3.6.1.4.1.866.30.1.35.10.2.1.8 |
vcvVoiceTransQosCirrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.2.1.9 |
vcvVoiceSuscriberTable SEQUENCE OF VcvVoiceSuscriberEntry .1.3.6.1.4.1.866.30.1.35.10.3 |
vcvVoiceSuscriberEntryAn entry of vcvVoiceSuscriberTable. VcvVoiceSuscriberEntry .1.3.6.1.4.1.866.30.1.35.10.3.1 |
vcvVoiceSuscrOrderNumberro INTEGER .1.3.6.1.4.1.866.30.1.35.10.3.1.1 |
vcvVoiceSuscrNumberro DisplayString .1.3.6.1.4.1.866.30.1.35.10.3.1.2 |
vcvVoiceSuscrStatusrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.3.1.3 |
vcvVoiceSuscrTransportNetworkro Enumeration .1.3.6.1.4.1.866.30.1.35.10.3.1.4 |
vcvVoiceSuscrTransportNetworkAddressrw OCTET STRING .1.3.6.1.4.1.866.30.1.35.10.3.1.5 |
vcvVoiceSuscrTransportProfileIdrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.3.1.6 |
vcvVoiceSuscrRemovedDigitNumberrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.3.1.7 |
vcvVoiceSuscrInsPrefixrw DisplayString .1.3.6.1.4.1.866.30.1.35.10.3.1.8 |
vcvVoiceSuscrInsSuffixrw DisplayString .1.3.6.1.4.1.866.30.1.35.10.3.1.9 |
vcvVoiceSwTable SEQUENCE OF VcvVoiceSwEntry .1.3.6.1.4.1.866.30.1.35.10.4 |
vcvVoiceSwEntryAn entry of vcvVoiceSwTable. VcvVoiceSwEntry .1.3.6.1.4.1.866.30.1.35.10.4.1 |
vcvVoiceSwOrderNumberro INTEGER .1.3.6.1.4.1.866.30.1.35.10.4.1.1 |
vcvVoiceSwSuscriberNumberro DisplayString .1.3.6.1.4.1.866.30.1.35.10.4.1.2 |
vcvVoiceSwStatusrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.4.1.3 |
vcvVoiceSwLogPortSetIdrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.4.1.4 |
vcvVoiceSwRemovedDigitNumberrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.4.1.5 |
vcvVoiceSwInsPrefixrw DisplayString .1.3.6.1.4.1.866.30.1.35.10.4.1.6 |
vcvVoiceSwInsSuffixrw DisplayString .1.3.6.1.4.1.866.30.1.35.10.4.1.7 |
vcvDialingReceptTable SEQUENCE OF VcvDialingReceptEntry .1.3.6.1.4.1.866.30.1.35.10.5 |
vcvDialingReceptEntryAn entry of vcvDialingReceptTable. VcvDialingReceptEntry .1.3.6.1.4.1.866.30.1.35.10.5.1 |
vcvDialRxSuscriberNumberro DisplayString .1.3.6.1.4.1.866.30.1.35.10.5.1.1 |
vcvDialRxStatusrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.5.1.2 |
vcvDialRxNumberLengthrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.5.1.3 |
vcvDialRxEndOfDialingTimerrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.5.1.4 |
vcvVoiceLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.35.10.10 |
vcvVoiceLogicalPortTable SEQUENCE OF VcvVoiceLogicalPortEntry .1.3.6.1.4.1.866.30.1.35.10.10.1 |
vcvVoiceLogicalPortEntryAn entry of vcvVoiceLogicalPortTable. VcvVoiceLogicalPortEntry .1.3.6.1.4.1.866.30.1.35.10.10.1.1 |
vcvVoiceLogPortIdro INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.1.1.1 |
vcvVoiceLogPortStatusrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.1.1.2 |
vcvVoiceLogPortTyperw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.1.1.3 |
vcvProfileTone OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.35.10.10.5 |
vcvToneGenTable SEQUENCE OF VcvToneGenEntry .1.3.6.1.4.1.866.30.1.35.10.10.5.1 |
vcvToneGenEntryAn entry of vcvToneGenTable. VcvToneGenEntry .1.3.6.1.4.1.866.30.1.35.10.10.5.1.1 |
vcvToneGenProfileIdro INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.5.1.1.1 |
vcvToneGenLevelrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.5.1.1.2 |
vcvToneTable SEQUENCE OF VcvToneEntry .1.3.6.1.4.1.866.30.1.35.10.10.5.2 |
vcvToneEntryAn entry of vcvToneTable. VcvToneEntry .1.3.6.1.4.1.866.30.1.35.10.10.5.2.1 |
vcvToneProfileIdro INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.5.2.1.1 |
vcvToneTypero Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.5.2.1.2 |
vcvToneEnablerw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.5.2.1.3 |
vcvToneFreq1rw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.5.2.1.4 |
vcvToneDuration1rw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.5.2.1.5 |
vcvToneFreq2rw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.5.2.1.6 |
vcvToneDuration2rw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.5.2.1.7 |
vcvVoiceLogicalPortEM OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.35.10.10.10 |
vcvEMPerm OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.35.10.10.10.1 |
vcvEMPermTable SEQUENCE OF VcvEMPermEntry .1.3.6.1.4.1.866.30.1.35.10.10.10.1.1 |
vcvEMPermEntryAn entry of vcvEMPermTable. VcvEMPermEntry .1.3.6.1.4.1.866.30.1.35.10.10.10.1.1.1 |
vcvEMPermLpIdro INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.1.1.1.1 |
vcvEMPermCommunicationModerw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.10.1.1.1.2 |
vcvEMPermRemoteNumberrw DisplayString .1.3.6.1.4.1.866.30.1.35.10.10.10.1.1.1.3 |
vcvEMPermInterfaceIdrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.10.1.1.1.4 |
vcvEMSw OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.35.10.10.10.2 |
vcvEMSwTable SEQUENCE OF VcvEMSwEntry .1.3.6.1.4.1.866.30.1.35.10.10.10.2.1 |
vcvEMSwEntryAn entry of vcvEMSwTable. VcvEMSwEntry .1.3.6.1.4.1.866.30.1.35.10.10.10.2.1.1 |
vcvEMSwLpIdro INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.1.1.1 |
vcvEMSwLogPortSetIdrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.1.1.2 |
vcvEMSwCallTyperw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.10.2.1.1.3 |
vcvEMSwRemoteNumberrw DisplayString .1.3.6.1.4.1.866.30.1.35.10.10.10.2.1.1.4 |
vcvEMSwConfigIdro INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.1.1.5 |
vcvEMSwInterfaceIdrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.10.2.1.1.6 |
vcvEMConfigTable SEQUENCE OF VcvEMConfigEntry .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2 |
vcvEMConfigEntryAn entry of vcvEMConfigTable. VcvEMConfigEntry .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1 |
vcvEMConfIdro INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.1 |
vcvEMConfCallSignallingrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.2 |
vcvEMConfDialingModerw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.3 |
vcvEMConfDialingTimeOutrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.4 |
vcvEMConfSigChannelDiscTimeOutrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.5 |
vcvEMConfTimeBetweenSuccOutCallrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.6 |
vcvEMConfLineInterfacePolarityrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.7 |
vcvEMConfMinLineSeizureAckTimerw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.8 |
vcvEMConfMaxLineSeizureAckTimerw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.9 |
vcvEMConfLineSeizureAckTimerw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.10 |
vcvEMConfClearToIncCallTimerw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.11 |
vcvEMConfSeizureAckPulseDurationrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.12 |
vcvEMConfMinSeizureAckPulseDurationrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.13 |
vcvEMConfDialingFormatrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.14 |
vcvEMConfInterdigitTimerw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.15 |
vcvEMConfPauseTimerw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.16 |
vcvEMConfDtmfDigitTimerw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.17 |
vcvEMConfDtmfDigitLevelrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.18 |
vcvEMConfDelayBeforeDialingrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.19 |
vcvEMConfDigitReceptionTimeOutrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.20 |
vcvEMConfEndOfDialingTimerrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.21 |
vcvEMConfToneProfilero INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.10.2.2.1.22 |
vcvVoiceLogicalPortFxx OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.35.10.10.15 |
vcvFxxLpTable SEQUENCE OF VcvFxxLpEntry .1.3.6.1.4.1.866.30.1.35.10.10.15.1 |
vcvFxxLpEntryAn entry of vcvFxxLpTable. VcvFxxLpEntry .1.3.6.1.4.1.866.30.1.35.10.10.15.1.1 |
vcvFxxLpLogPortIdro INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.1.1.1 |
vcvFxxLpSetIdrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.1.1.2 |
vcvFxxLpCallTyperw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.15.1.1.3 |
vcvFxxLpRemoteNumberrw DisplayString .1.3.6.1.4.1.866.30.1.35.10.10.15.1.1.4 |
vcvFxxLpConfigIdro INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.1.1.5 |
vcvFxxLpInterfaceIdrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.15.1.1.6 |
vcvFxxConfigTable SEQUENCE OF VcvFxxConfigEntry .1.3.6.1.4.1.866.30.1.35.10.10.15.2 |
vcvFxxConfigEntryAn entry of vcvFxxConfigTable. VcvFxxConfigEntry .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1 |
vcvFxxConfIdro INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.1 |
vcvFxxConfCallSignallingro Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.2 |
vcvFxxConfDialingModerw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.3 |
vcvFxxConfSigChannelDiscTimeOutrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.4 |
vcvFxxConfTimeBetweenSuccOutCallrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.5 |
vcvFxxConfDialingFormatrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.6 |
vcvFxxConfInterdigitTimerw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.7 |
vcvFxxConfPauseTimerw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.8 |
vcvFxxConfDtmfDigitTimerw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.9 |
vcvFxxConfDtmfDigitLevelrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.10 |
vcvFxxConfTxRecallSignalDurationrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.11 |
vcvFxxConfDelayBeforeDialingrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.12 |
vcvFxxConfDialingTimeOutrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.13 |
vcvFxxConfDigitReceptionTimeOutrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.14 |
vcvFxxConfEndOfDialingTimerrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.15 |
vcvFxxConfMinRxRecallSignalDurationrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.16 |
vcvFxxConfToneProfilero INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.17 |
vcvFxxConfRingingProfilero INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.2.1.18 |
vcvFxxRingTable SEQUENCE OF VcvFxxRingEntry .1.3.6.1.4.1.866.30.1.35.10.10.15.3 |
vcvFxxRingEntryAn entry of vcvFxxRingTable. VcvFxxRingEntry .1.3.6.1.4.1.866.30.1.35.10.10.15.3.1 |
vcvFxxRingProfilero INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.3.1.1 |
vcvFxxRingFrequencyrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.3.1.2 |
vcvFxxRingTopDurationrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.3.1.3 |
vcvFxxRingSilenceDurationrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.3.1.4 |
vcvFxxRingMaxRingingTimerw INTEGER .1.3.6.1.4.1.866.30.1.35.10.10.15.3.1.5 |
vcvAnalogLines OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.1.35.10.15 |
vcvAnalogLineTable SEQUENCE OF VcvAnalogLineEntry .1.3.6.1.4.1.866.30.1.35.10.15.1 |
vcvAnalogLineEntryAn entry of vcvAnalogLineTable. VcvAnalogLineEntry .1.3.6.1.4.1.866.30.1.35.10.15.1.1 |
vcvAnalogLineInterfaceIdro Enumeration .1.3.6.1.4.1.866.30.1.35.10.15.1.1.1 |
vcvAnalogLineTypeInterfacerw Enumeration .1.3.6.1.4.1.866.30.1.35.10.15.1.1.2 |
vcvAnalogLineVoiceProfilerw INTEGER .1.3.6.1.4.1.866.30.1.35.10.15.1.1.3 |
vcvVoiceProfileTable SEQUENCE OF VcvVoiceProfileEntry .1.3.6.1.4.1.866.30.1.35.10.15.5 |
vcvVoiceProfileEntryAn entry of vcvVoiceProfileTable. VcvVoiceProfileEntry .1.3.6.1.4.1.866.30.1.35.10.15.5.1 |
vcvVoiceProfIdro INTEGER .1.3.6.1.4.1.866.30.1.35.10.15.5.1.1 |
vcvVoiceProfTransmitLevelrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.15.5.1.2 |
vcvVoiceProfReceiveLevelrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.15.5.1.3 |
vcvVoiceProfSilenceDetectionrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.15.5.1.4 |
vcvVoiceProfSilenceDetectionLevelrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.15.5.1.5 |
vcvVoiceProfEchoCancellationrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.15.5.1.6 |
vcvVoiceProfEchoCancellationLengthrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.15.5.1.7 |
vcvVoiceProfNoiseFramesPeriodicityrw INTEGER .1.3.6.1.4.1.866.30.1.35.10.15.5.1.8 |
vcvVoiceProfLoopActivationrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.15.5.1.9 |
vcvVoiceProfFaxActivationrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.15.5.1.10 |
vcvVoiceProfMaximumFaxSpeedrw Enumeration .1.3.6.1.4.1.866.30.1.35.10.15.5.1.11 |
vcvVoicePhysicalPortTable SEQUENCE OF VcvVoicePhysicalPortEntry .1.3.6.1.4.1.866.30.1.35.10.15.10 |
vcvVoicePhysicalPortEntryAn entry of vcvVoicePhysicalPortTable. VcvVoicePhysicalPortEntry .1.3.6.1.4.1.866.30.1.35.10.15.10.1 |
vcvVoicePhysPortIdro Enumeration .1.3.6.1.4.1.866.30.1.35.10.15.10.1.1 |
vcvVoicePhysPortConnectorro Enumeration .1.3.6.1.4.1.866.30.1.35.10.15.10.1.2 |
dvbConfig OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20 |
dcControl OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.1 |
dcCtlDaterw OCTET STRING .1.3.6.1.4.1.866.30.20.1.1 |
dcCtlHourrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.30.20.1.2 |
dcCtlConfigComrw Enumeration .1.3.6.1.4.1.866.30.20.1.3 |
dcCtlConfigLoadrw INTEGER .1.3.6.1.4.1.866.30.20.1.4 |
dcCtlErrorTable SEQUENCE OF DcCtlErrorEntry .1.3.6.1.4.1.866.30.20.1.10 |
dcCtlErrorEntryAn entry of dcCtlErrorTable. DcCtlErrorEntry .1.3.6.1.4.1.866.30.20.1.10.1 |
dcCtlErrorIndexro INTEGER .1.3.6.1.4.1.866.30.20.1.10.1.1 |
dcCtlErrorCodero INTEGER .1.3.6.1.4.1.866.30.20.1.10.1.2 |
dcCtlErrorMessagero DisplayString .1.3.6.1.4.1.866.30.20.1.10.1.3 |
dcCtlErrorTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.30.20.1.10.1.4 |
dcSystem OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.5 |
dcSysConfActiverw Enumeration .1.3.6.1.4.1.866.30.20.5.1 |
dcSysConfDatero OCTET STRING .1.3.6.1.4.1.866.30.20.5.2 |
dcSysConfHourro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.30.20.5.3 |
dcManagement OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.10 |
dcmAlrmGenTable SEQUENCE OF DcmAlrmGenEntry .1.3.6.1.4.1.866.30.20.10.1 |
dcmAlrmGenEntryAn entry of dcmAlrmGenTable. DcmAlrmGenEntry .1.3.6.1.4.1.866.30.20.10.1.1 |
dcmAlrmGenFamilyIdro Enumeration .1.3.6.1.4.1.866.30.20.10.1.1.1 |
dcmAlrmGenTypro Enumeration .1.3.6.1.4.1.866.30.20.10.1.1.2 |
dcmAlrmGenTrapSendrw Enumeration .1.3.6.1.4.1.866.30.20.10.1.1.3 |
dcmAlrmGenDisplayrw Enumeration .1.3.6.1.4.1.866.30.20.10.1.1.4 |
dcmAlrmSCTable SEQUENCE OF DcmAlrmSCEntry .1.3.6.1.4.1.866.30.20.10.2 |
dcmAlrmSCEntryAn entry of dcmAlrmSCTable. DcmAlrmSCEntry .1.3.6.1.4.1.866.30.20.10.2.1 |
dcmAlrmSCFamilyIdro Enumeration .1.3.6.1.4.1.866.30.20.10.2.1.1 |
dcmAlrmSCTypro Enumeration .1.3.6.1.4.1.866.30.20.10.2.1.2 |
dcmAlrmSCTrapSendrw Enumeration .1.3.6.1.4.1.866.30.20.10.2.1.3 |
dcmAlrmSCDisplayrw Enumeration .1.3.6.1.4.1.866.30.20.10.2.1.4 |
dcmAlrmVCTable SEQUENCE OF DcmAlrmVCEntry .1.3.6.1.4.1.866.30.20.10.3 |
dcmAlrmVCEntryAn entry of dcmAlrmVCTable. DcmAlrmVCEntry .1.3.6.1.4.1.866.30.20.10.3.1 |
dcmAlrmVCFamilyIdro Enumeration .1.3.6.1.4.1.866.30.20.10.3.1.1 |
dcmAlrmVCTypro Enumeration .1.3.6.1.4.1.866.30.20.10.3.1.2 |
dcmAlrmVCTrapSendrw Enumeration .1.3.6.1.4.1.866.30.20.10.3.1.3 |
dcmAlrmVCDisplayrw Enumeration .1.3.6.1.4.1.866.30.20.10.3.1.4 |
dcmAlrmLMITable SEQUENCE OF DcmAlrmLMIEntry .1.3.6.1.4.1.866.30.20.10.4 |
dcmAlrmLMIEntryAn entry of dcmAlrmLMITable. DcmAlrmLMIEntry .1.3.6.1.4.1.866.30.20.10.4.1 |
dcmAlrmLMIFamilyIdro Enumeration .1.3.6.1.4.1.866.30.20.10.4.1.1 |
dcmAlrmLMITypro Enumeration .1.3.6.1.4.1.866.30.20.10.4.1.2 |
dcmAlrmLMITrapSendrw Enumeration .1.3.6.1.4.1.866.30.20.10.4.1.3 |
dcmAlrmLMIDisplayrw Enumeration .1.3.6.1.4.1.866.30.20.10.4.1.4 |
dcmAlrmSwTable SEQUENCE OF DcmAlrmSwEntry .1.3.6.1.4.1.866.30.20.10.5 |
dcmAlrmSwEntryAn entry of dcmAlrmSwTable. DcmAlrmSwEntry .1.3.6.1.4.1.866.30.20.10.5.1 |
dcmAlrmSwFamilyIdro Enumeration .1.3.6.1.4.1.866.30.20.10.5.1.1 |
dcmAlrmSwTypro Enumeration .1.3.6.1.4.1.866.30.20.10.5.1.2 |
dcmAlrmSwTrapSendrw Enumeration .1.3.6.1.4.1.866.30.20.10.5.1.3 |
dcmAlrmSwDisplayrw Enumeration .1.3.6.1.4.1.866.30.20.10.5.1.4 |
dcmAlrmCmpTable SEQUENCE OF DcmAlrmCmpEntry .1.3.6.1.4.1.866.30.20.10.6 |
dcmAlrmCmpEntryAn entry of dcmAlrmCmpTable. DcmAlrmCmpEntry .1.3.6.1.4.1.866.30.20.10.6.1 |
dcmAlrmCmpFamilyIdro Enumeration .1.3.6.1.4.1.866.30.20.10.6.1.1 |
dcmAlrmCmpTypro Enumeration .1.3.6.1.4.1.866.30.20.10.6.1.2 |
dcmAlrmCmpTrapSendrw Enumeration .1.3.6.1.4.1.866.30.20.10.6.1.3 |
dcmAlrmCmpDisplayrw Enumeration .1.3.6.1.4.1.866.30.20.10.6.1.4 |
dcmAlrmFaxTable SEQUENCE OF DcmAlrmFaxEntry .1.3.6.1.4.1.866.30.20.10.7 |
dcmAlrmFaxEntryAn entry of dcmAlrmFaxTable. DcmAlrmFaxEntry .1.3.6.1.4.1.866.30.20.10.7.1 |
dcmAlrmFaxFamilyIdro Enumeration .1.3.6.1.4.1.866.30.20.10.7.1.1 |
dcmAlrmFaxTypro Enumeration .1.3.6.1.4.1.866.30.20.10.7.1.2 |
dcmAlrmFaxTrapSendrw Enumeration .1.3.6.1.4.1.866.30.20.10.7.1.3 |
dcmAlrmFaxDisplayrw Enumeration .1.3.6.1.4.1.866.30.20.10.7.1.4 |
dcmAlrmTftpTable SEQUENCE OF DcmAlrmTftpEntry .1.3.6.1.4.1.866.30.20.10.8 |
dcmAlrmTftpEntryAn entry of dcmAlrmTftpTable. DcmAlrmTftpEntry .1.3.6.1.4.1.866.30.20.10.8.1 |
dcmAlrmTftpFamilyIdro Enumeration .1.3.6.1.4.1.866.30.20.10.8.1.1 |
dcmAlrmTftpTypro Enumeration .1.3.6.1.4.1.866.30.20.10.8.1.2 |
dcmAlrmTftpTrapSendrw Enumeration .1.3.6.1.4.1.866.30.20.10.8.1.3 |
dcmAlrmTftpDisplayrw Enumeration .1.3.6.1.4.1.866.30.20.10.8.1.4 |
dcmAlrmSvcTable SEQUENCE OF DcmAlrmSvcEntry .1.3.6.1.4.1.866.30.20.10.9 |
dcmAlrmSvcEntryAn entry of dcmAlrmSvcTable. DcmAlrmSvcEntry .1.3.6.1.4.1.866.30.20.10.9.1 |
dcmAlrmSvcFamilyIdro Enumeration .1.3.6.1.4.1.866.30.20.10.9.1.1 |
dcmAlrmSvcTypro Enumeration .1.3.6.1.4.1.866.30.20.10.9.1.2 |
dcmAlrmSvcTrapSendrw Enumeration .1.3.6.1.4.1.866.30.20.10.9.1.3 |
dcmAlrmSvcDisplayrw Enumeration .1.3.6.1.4.1.866.30.20.10.9.1.4 |
dcmAlrmSyncTable SEQUENCE OF DcmAlrmSyncEntry .1.3.6.1.4.1.866.30.20.10.10 |
dcmAlrmSyncEntryAn entry of dcmAlrmSyncTable. DcmAlrmSyncEntry .1.3.6.1.4.1.866.30.20.10.10.1 |
dcmAlrmSyncFamilyIdro Enumeration .1.3.6.1.4.1.866.30.20.10.10.1.1 |
dcmAlrmSyncTypro Enumeration .1.3.6.1.4.1.866.30.20.10.10.1.2 |
dcmAlrmSyncTrapSendrw Enumeration .1.3.6.1.4.1.866.30.20.10.10.1.3 |
dcmAlrmSyncDisplayrw Enumeration .1.3.6.1.4.1.866.30.20.10.10.1.4 |
dcInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.15 |
dcfPhysicalPortTable SEQUENCE OF DcfPhysicalPortEntry .1.3.6.1.4.1.866.30.20.15.1 |
dcfPhysicalPortEntryAn entry of dcfPhysicalPortTable. DcfPhysicalPortEntry .1.3.6.1.4.1.866.30.20.15.1.1 |
dcfPhysPortIdro Enumeration .1.3.6.1.4.1.866.30.20.15.1.1.1 |
dcfPhysPortConnectorro Enumeration .1.3.6.1.4.1.866.30.20.15.1.1.2 |
dcfNumericLines OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.15.5 |
dcfNumericLineTable SEQUENCE OF DcfNumericLineEntry .1.3.6.1.4.1.866.30.20.15.5.1 |
dcfNumericLineEntryAn entry of dcfNumericLineTable. DcfNumericLineEntry .1.3.6.1.4.1.866.30.20.15.5.1.1 |
dcfNumericLineInterfaceIdro Enumeration .1.3.6.1.4.1.866.30.20.15.5.1.1.1 |
dcfNumericLineTypero Enumeration .1.3.6.1.4.1.866.30.20.15.5.1.1.2 |
dcfDataLineTable SEQUENCE OF DcfDataLineEntry .1.3.6.1.4.1.866.30.20.15.5.2 |
dcfDataLineEntryAn entry of dcfDataLineTable. DcfDataLineEntry .1.3.6.1.4.1.866.30.20.15.5.2.1 |
dcfDataLineInterfaceIdro Enumeration .1.3.6.1.4.1.866.30.20.15.5.2.1.1 |
dcfDataLineRaterw Enumeration .1.3.6.1.4.1.866.30.20.15.5.2.1.2 |
dcfDataLineRts105rw Enumeration .1.3.6.1.4.1.866.30.20.15.5.2.1.3 |
dcfDataLineDtr108rw Enumeration .1.3.6.1.4.1.866.30.20.15.5.2.1.4 |
dcfDataLineCts106rw Enumeration .1.3.6.1.4.1.866.30.20.15.5.2.1.5 |
dcfDataLineDsr107rw Enumeration .1.3.6.1.4.1.866.30.20.15.5.2.1.6 |
dcfDataLineDcd109rw Enumeration .1.3.6.1.4.1.866.30.20.15.5.2.1.7 |
dcfConfLineTable SEQUENCE OF DcfConfLineEntry .1.3.6.1.4.1.866.30.20.15.5.3 |
dcfConfLineEntryAn entry of dcfConfLineTable. DcfConfLineEntry .1.3.6.1.4.1.866.30.20.15.5.3.1 |
dcfConfLineInterfaceIdro Enumeration .1.3.6.1.4.1.866.30.20.15.5.3.1.1 |
dcfConfLineRatero Enumeration .1.3.6.1.4.1.866.30.20.15.5.3.1.2 |
dcLogicalPorts OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.20 |
dclLogicalPortTable SEQUENCE OF DclLogicalPortEntry .1.3.6.1.4.1.866.30.20.20.1 |
dclLogicalPortEntryAn entry of dclLogicalPortTable. DclLogicalPortEntry .1.3.6.1.4.1.866.30.20.20.1.1 |
dclLogPortIdro INTEGER .1.3.6.1.4.1.866.30.20.20.1.1.1 |
dclLogPortStatusrw Enumeration .1.3.6.1.4.1.866.30.20.20.1.1.2 |
dclLogPortTyperw Enumeration .1.3.6.1.4.1.866.30.20.20.1.1.3 |
dclFrameRelay OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.20.5 |
dclFrTerminalEquipment OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.20.5.1 |
dclFrTeLogPortTable SEQUENCE OF DclFrTeLogPortEntry .1.3.6.1.4.1.866.30.20.20.5.1.1 |
dclFrTeLogPortEntryAn entry of dclFrTeLogPortTable. DclFrTeLogPortEntry .1.3.6.1.4.1.866.30.20.20.5.1.1.1 |
dclFrTeLpLogPortIdro INTEGER .1.3.6.1.4.1.866.30.20.20.5.1.1.1.1 |
dclFrTeLpInterfaceIdro Enumeration .1.3.6.1.4.1.866.30.20.20.5.1.1.1.2 |
dclFrTeLpConfigIdro INTEGER .1.3.6.1.4.1.866.30.20.20.5.1.1.1.3 |
dclFrTeLpLmirw Enumeration .1.3.6.1.4.1.866.30.20.20.5.1.1.1.4 |
dclFrSwitchEquipment OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.20.5.2 |
dclFrSeLogPortTable SEQUENCE OF DclFrSeLogPortEntry .1.3.6.1.4.1.866.30.20.20.5.2.1 |
dclFrSeLogPortEntryAn entry of dclFrSeLogPortTable. DclFrSeLogPortEntry .1.3.6.1.4.1.866.30.20.20.5.2.1.1 |
dclFrSeLpLogPortIdro INTEGER .1.3.6.1.4.1.866.30.20.20.5.2.1.1.1 |
dclFrSeLpInterfaceIdro Enumeration .1.3.6.1.4.1.866.30.20.20.5.2.1.1.2 |
dclFrSeLpConfigIdro INTEGER .1.3.6.1.4.1.866.30.20.20.5.2.1.1.3 |
dclFrConfigurationTe OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.20.5.3 |
dclFrLmiParameterTable SEQUENCE OF DclFrLmiParameterEntry .1.3.6.1.4.1.866.30.20.20.5.3.1 |
dclFrLmiParameterEntryAn entry of dclFrLmiParameterTable. DclFrLmiParameterEntry .1.3.6.1.4.1.866.30.20.20.5.3.1.1 |
dclFrLmiParaConfigIdro INTEGER .1.3.6.1.4.1.866.30.20.20.5.3.1.1.1 |
dclFrLmiParaDlcirw INTEGER .1.3.6.1.4.1.866.30.20.20.5.3.1.1.2 |
dclFrLmiParaStandardrw Enumeration .1.3.6.1.4.1.866.30.20.20.5.3.1.1.3 |
dclFrLmiParaAccessibilityConditionrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.3.1.1.4 |
dclFrLmiParaN391FullStatusPollCountrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.3.1.1.5 |
dclFrLmiParaN392ErrorThresholdrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.3.1.1.6 |
dclFrLmiParaN393MonitoredEventCountrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.3.1.1.7 |
dclFrLmiParaT391LinkIntegPollTimerrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.3.1.1.8 |
dclFrConfigurationSe OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.20.5.4 |
dclFrSeSignallingTable SEQUENCE OF DclFrSeSignallingEntry .1.3.6.1.4.1.866.30.20.20.5.4.1 |
dclFrSeSignallingEntryAn entry of dclFrSeSignallingTable. DclFrSeSignallingEntry .1.3.6.1.4.1.866.30.20.20.5.4.1.1 |
dclFrSeSigConfigIdro INTEGER .1.3.6.1.4.1.866.30.20.20.5.4.1.1.1 |
dclFrSeSigOuputTimeoutrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.4.1.1.2 |
dclFrSeSigSignalOutputWinSizerw INTEGER .1.3.6.1.4.1.866.30.20.20.5.4.1.1.3 |
dclFrSeSigN200RetransMaxCountrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.4.1.1.5 |
dclFrSeSigT200RetransTimerrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.4.1.1.6 |
dclFrSeSigT203InactivityTimerrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.4.1.1.7 |
dclFrSeSigT303SetupResponseTimerrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.4.1.1.8 |
dclFrSeSigT305DisconnectResponseTimerrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.4.1.1.9 |
dclFrSeSigT308ReleaseResponseTimerrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.4.1.1.10 |
dclFrSeSigT310CallProceedingTimerrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.4.1.1.11 |
dclFrSeSigT316RestartAcknowledgeTimerrw INTEGER .1.3.6.1.4.1.866.30.20.20.5.4.1.1.12 |
dcWanSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.25 |
dcwEquipParams OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.25.1 |
dcwEquipDnicZoAddrrw OCTET STRING .1.3.6.1.4.1.866.30.20.25.1.1 |
dcwEquipVoiceRoutingServicePortAddrrw OCTET STRING .1.3.6.1.4.1.866.30.20.25.1.2 |
dcwEquipIpVirtualPortAddrrw OCTET STRING .1.3.6.1.4.1.866.30.20.25.1.3 |
dcwEquipRemoteConfPortAddrrw OCTET STRING .1.3.6.1.4.1.866.30.20.25.1.4 |
dcwEquipVoiceVirtualPortAddrrw OCTET STRING .1.3.6.1.4.1.866.30.20.25.1.5 |
dcwEquipSVCDisconnectOnCongestionrw Enumeration .1.3.6.1.4.1.866.30.20.25.1.6 |
dcwABPvcLpTable SEQUENCE OF DcwABPvcLpEntry .1.3.6.1.4.1.866.30.20.25.2 |
dcwABPvcLpEntryAn entry of dcwABPvcLpTable. DcwABPvcLpEntry .1.3.6.1.4.1.866.30.20.25.2.1 |
dcwABPvcLpIdro INTEGER .1.3.6.1.4.1.866.30.20.25.2.1.1 |
dcwABPvcLpAddressrw OCTET STRING .1.3.6.1.4.1.866.30.20.25.2.1.2 |
dcVirtualPorts OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.30 |
dcvVirtualPortTable SEQUENCE OF DcvVirtualPortEntry .1.3.6.1.4.1.866.30.20.30.1 |
dcvVirtualPortEntryAn entry of dcvVirtualPortTable. DcvVirtualPortEntry .1.3.6.1.4.1.866.30.20.30.1.1 |
dcvVirtualPortIdro Enumeration .1.3.6.1.4.1.866.30.20.30.1.1.1 |
dcvIpVirtualPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.30.5 |
dcvIpLocalTable SEQUENCE OF DcvIpLocalEntry .1.3.6.1.4.1.866.30.20.30.5.1 |
dcvIpLocalEntryAn entry of dcvIpLocalTable. DcvIpLocalEntry .1.3.6.1.4.1.866.30.20.30.5.1.1 |
dcvIpLocVirtualPortIdro Enumeration .1.3.6.1.4.1.866.30.20.30.5.1.1.1 |
dcvIpLocAddressHostrw IpAddress .1.3.6.1.4.1.866.30.20.30.5.1.1.2 |
dcvIpLocSubNetMaskrw IpAddress .1.3.6.1.4.1.866.30.20.30.5.1.1.3 |
dcvIpLocMturo INTEGER .1.3.6.1.4.1.866.30.20.30.5.1.1.4 |
dcvIpLocRouteNextHoprw IpAddress .1.3.6.1.4.1.866.30.20.30.5.1.1.5 |
dcvIpLocMinimumRecallTimerrw INTEGER .1.3.6.1.4.1.866.30.20.30.5.1.1.6 |
dcvIpLocSvcClearCallTimerrw INTEGER .1.3.6.1.4.1.866.30.20.30.5.1.1.7 |
dcvIpLocSvcCallRetryCountrw INTEGER .1.3.6.1.4.1.866.30.20.30.5.1.1.8 |
dcvSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.30.5.5 |
dcvSnmpGen OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.30.5.5.1 |
dcvSnmpGenVirtualPortIdrw Enumeration .1.3.6.1.4.1.866.30.20.30.5.5.1.1 |
dcvSnmpGenCommunityStringReadOnlyrw DisplayString .1.3.6.1.4.1.866.30.20.30.5.5.1.2 |
dcvSnmpGenCommunityStringReadWriterw DisplayString .1.3.6.1.4.1.866.30.20.30.5.5.1.3 |
dcvSnmpGenCommunityStringTraprw DisplayString .1.3.6.1.4.1.866.30.20.30.5.5.1.4 |
dcvSnmpGenAuthenticationFailureTraprw Enumeration .1.3.6.1.4.1.866.30.20.30.5.5.1.5 |
dcvSnmpManagerTable SEQUENCE OF DcvSnmpManagerEntry .1.3.6.1.4.1.866.30.20.30.5.5.2 |
dcvSnmpManagerEntryAn entry of dcvSnmpManagerTable. DcvSnmpManagerEntry .1.3.6.1.4.1.866.30.20.30.5.5.2.1 |
dcvSnmpManagerIpAddressro IpAddress .1.3.6.1.4.1.866.30.20.30.5.5.2.1.1 |
dcvSnmpManagerStatusrw Enumeration .1.3.6.1.4.1.866.30.20.30.5.5.2.1.2 |
dcvSnmpManagerNamerw DisplayString .1.3.6.1.4.1.866.30.20.30.5.5.2.1.3 |
dcvSnmpManagerSendTrapsrw Enumeration .1.3.6.1.4.1.866.30.20.30.5.5.2.1.4 |
dcvSnmpManagerTrapsUdpPortrw INTEGER .1.3.6.1.4.1.866.30.20.30.5.5.2.1.5 |
dcvRemoteConfTable SEQUENCE OF DcvRemoteConfEntry .1.3.6.1.4.1.866.30.20.30.5.5.3 |
dcvRemoteConfEntryAn entry of dcvRemoteConfTable. DcvRemoteConfEntry .1.3.6.1.4.1.866.30.20.30.5.5.3.1 |
dcvRemoteConfNamero DisplayString .1.3.6.1.4.1.866.30.20.30.5.5.3.1.1 |
dcvRemoteConfStatusrw Enumeration .1.3.6.1.4.1.866.30.20.30.5.5.3.1.2 |
dcvRemoteConfWanAddressrw OCTET STRING .1.3.6.1.4.1.866.30.20.30.5.5.3.1.3 |
dcvTftpTable SEQUENCE OF DcvTftpEntry .1.3.6.1.4.1.866.30.20.30.5.10 |
dcvTftpEntryAn entry of dcvTftpTable. DcvTftpEntry .1.3.6.1.4.1.866.30.20.30.5.10.1 |
dcvTftpIpAddressro IpAddress .1.3.6.1.4.1.866.30.20.30.5.10.1.1 |
dcvTftpStatusrw Enumeration .1.3.6.1.4.1.866.30.20.30.5.10.1.2 |
dcvTftpNamerw DisplayString .1.3.6.1.4.1.866.30.20.30.5.10.1.3 |
dcvTftpRetryTimerrw INTEGER .1.3.6.1.4.1.866.30.20.30.5.10.1.4 |
dcvTftpInactTimerrw INTEGER .1.3.6.1.4.1.866.30.20.30.5.10.1.5 |
dcvRemoteNetToMediaTable SEQUENCE OF DcvRemoteNetToMediaEntry .1.3.6.1.4.1.866.30.20.30.5.15 |
dcvRemoteNetToMediaEntryAn entry of dcvRemoteNetToMediaTable. DcvRemoteNetToMediaEntry .1.3.6.1.4.1.866.30.20.30.5.15.1 |
dcvRemNetIpAddressro IpAddress .1.3.6.1.4.1.866.30.20.30.5.15.1.1 |
dcvRemNetStatusrw Enumeration .1.3.6.1.4.1.866.30.20.30.5.15.1.2 |
dcvRemNetWanAddressrw OCTET STRING .1.3.6.1.4.1.866.30.20.30.5.15.1.3 |
dcvRemNetEncapsulationrw Enumeration .1.3.6.1.4.1.866.30.20.30.5.15.1.4 |
dcvVoiceVirtualPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.30.10 |
dcvVoiceGen OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.30.10.1 |
dcvVoiceVirtualPortIdrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.1.1 |
dcvVoiceTransportTable SEQUENCE OF DcvVoiceTransportEntry .1.3.6.1.4.1.866.30.20.30.10.2 |
dcvVoiceTransportEntryAn entry of dcvVoiceTransportTable. DcvVoiceTransportEntry .1.3.6.1.4.1.866.30.20.30.10.2.1 |
dcvVoiceTransProfileIdrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.2.1.1 |
dcvVoiceTransEncapsulationModerw Enumeration .1.3.6.1.4.1.866.30.20.30.10.2.1.2 |
dcvVoiceTransMaxPayLoadNumberrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.2.1.3 |
dcvVoiceTransCompressionAlgorithmrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.2.1.4 |
dcvVoiceTransJitterCompensationrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.2.1.5 |
dcvVoiceTransVoicePacketsCombinationrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.2.1.6 |
dcvVoiceTransQosBcrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.2.1.7 |
dcvVoiceTransQosBerw Enumeration .1.3.6.1.4.1.866.30.20.30.10.2.1.8 |
dcvVoiceTransQosCirrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.2.1.9 |
dcvVoiceSuscriberTable SEQUENCE OF DcvVoiceSuscriberEntry .1.3.6.1.4.1.866.30.20.30.10.3 |
dcvVoiceSuscriberEntryAn entry of dcvVoiceSuscriberTable. DcvVoiceSuscriberEntry .1.3.6.1.4.1.866.30.20.30.10.3.1 |
dcvVoiceSuscrOrderNumberro INTEGER .1.3.6.1.4.1.866.30.20.30.10.3.1.1 |
dcvVoiceSuscrNumberro DisplayString .1.3.6.1.4.1.866.30.20.30.10.3.1.2 |
dcvVoiceSuscrStatusrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.3.1.3 |
dcvVoiceSuscrTransportNetworkro Enumeration .1.3.6.1.4.1.866.30.20.30.10.3.1.4 |
dcvVoiceSuscrTransportNetworkAddressrw OCTET STRING .1.3.6.1.4.1.866.30.20.30.10.3.1.5 |
dcvVoiceSuscrTransportProfileIdrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.3.1.6 |
dcvVoiceSuscrRemovedDigitNumberrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.3.1.7 |
dcvVoiceSuscrInsPrefixrw DisplayString .1.3.6.1.4.1.866.30.20.30.10.3.1.8 |
dcvVoiceSuscrInsSuffixrw DisplayString .1.3.6.1.4.1.866.30.20.30.10.3.1.9 |
dcvVoiceSwTable SEQUENCE OF DcvVoiceSwEntry .1.3.6.1.4.1.866.30.20.30.10.4 |
dcvVoiceSwEntryAn entry of dcvVoiceSwTable. DcvVoiceSwEntry .1.3.6.1.4.1.866.30.20.30.10.4.1 |
dcvVoiceSwOrderNumberro INTEGER .1.3.6.1.4.1.866.30.20.30.10.4.1.1 |
dcvVoiceSwSuscriberNumberro DisplayString .1.3.6.1.4.1.866.30.20.30.10.4.1.2 |
dcvVoiceSwStatusrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.4.1.3 |
dcvVoiceSwLogPortSetIdrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.4.1.4 |
dcvVoiceSwRemovedDigitNumberrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.4.1.5 |
dcvVoiceSwInsPrefixrw DisplayString .1.3.6.1.4.1.866.30.20.30.10.4.1.6 |
dcvVoiceSwInsSuffixrw DisplayString .1.3.6.1.4.1.866.30.20.30.10.4.1.7 |
dcvDialingReceptTable SEQUENCE OF DcvDialingReceptEntry .1.3.6.1.4.1.866.30.20.30.10.5 |
dcvDialingReceptEntryAn entry of dcvDialingReceptTable. DcvDialingReceptEntry .1.3.6.1.4.1.866.30.20.30.10.5.1 |
dcvDialRxSuscriberNumberro DisplayString .1.3.6.1.4.1.866.30.20.30.10.5.1.1 |
dcvDialRxStatusrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.5.1.2 |
dcvDialRxNumberLengthrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.5.1.3 |
dcvDialRxEndOfDialingTimerrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.5.1.4 |
dcvVoiceLogPort OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.30.10.10 |
dcvVoiceLogicalPortTable SEQUENCE OF DcvVoiceLogicalPortEntry .1.3.6.1.4.1.866.30.20.30.10.10.1 |
dcvVoiceLogicalPortEntryAn entry of dcvVoiceLogicalPortTable. DcvVoiceLogicalPortEntry .1.3.6.1.4.1.866.30.20.30.10.10.1.1 |
dcvVoiceLogPortIdro INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.1.1.1 |
dcvVoiceLogPortStatusrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.10.1.1.2 |
dcvVoiceLogPortTyperw Enumeration .1.3.6.1.4.1.866.30.20.30.10.10.1.1.3 |
dcvProfileTone OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.30.10.10.5 |
dcvToneGenTable SEQUENCE OF DcvToneGenEntry .1.3.6.1.4.1.866.30.20.30.10.10.5.1 |
dcvToneGenEntryAn entry of dcvToneGenTable. DcvToneGenEntry .1.3.6.1.4.1.866.30.20.30.10.10.5.1.1 |
dcvToneGenProfileIdro INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.5.1.1.1 |
dcvToneGenLevelrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.5.1.1.2 |
dcvToneTable SEQUENCE OF DcvToneEntry .1.3.6.1.4.1.866.30.20.30.10.10.5.2 |
dcvToneEntryAn entry of dcvToneTable. DcvToneEntry .1.3.6.1.4.1.866.30.20.30.10.10.5.2.1 |
dcvToneProfileIdro INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.5.2.1.1 |
dcvToneTypero Enumeration .1.3.6.1.4.1.866.30.20.30.10.10.5.2.1.2 |
dcvToneEnablerw Enumeration .1.3.6.1.4.1.866.30.20.30.10.10.5.2.1.3 |
dcvToneFreq1rw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.5.2.1.4 |
dcvToneDuration1rw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.5.2.1.5 |
dcvToneFreq2rw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.5.2.1.6 |
dcvToneDuration2rw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.5.2.1.7 |
dcvVoiceLogicalPortTSPCM OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.30.10.10.10 |
dcvTSPCMPerm OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.30.10.10.10.1 |
dcvTSPCMPermTable SEQUENCE OF DcvTSPCMPermEntry .1.3.6.1.4.1.866.30.20.30.10.10.10.1.1 |
dcvTSPCMPermEntryAn entry of dcvTSPCMPermTable. DcvTSPCMPermEntry .1.3.6.1.4.1.866.30.20.30.10.10.10.1.1.1 |
dcvTSPCMPermLpIdro INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.1.1.1.1 |
dcvTSPCMPermCommunicationModerw Enumeration .1.3.6.1.4.1.866.30.20.30.10.10.10.1.1.1.2 |
dcvTSPCMPermRemoteNumberrw DisplayString .1.3.6.1.4.1.866.30.20.30.10.10.10.1.1.1.3 |
dcvTSPCMPermConfigIdro INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.1.1.1.4 |
dcvTSPCMPermChannIfIdrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.1.1.1.5 |
dcvTSPCMSw OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.30.10.10.10.2 |
dcvTSPCMSwTable SEQUENCE OF DcvTSPCMSwEntry .1.3.6.1.4.1.866.30.20.30.10.10.10.2.1 |
dcvTSPCMSwEntryAn entry of dcvTSPCMSwTable. DcvTSPCMSwEntry .1.3.6.1.4.1.866.30.20.30.10.10.10.2.1.1 |
dcvTSPCMSwLpIdro INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.2.1.1.1 |
dcvTSPCMSwLogPortSetIdrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.2.1.1.2 |
dcvTSPCMSwCallTyperw Enumeration .1.3.6.1.4.1.866.30.20.30.10.10.10.2.1.1.3 |
dcvTSPCMSwRemoteNumberrw DisplayString .1.3.6.1.4.1.866.30.20.30.10.10.10.2.1.1.4 |
dcvTSPCMSwConfigIdro INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.2.1.1.5 |
dcvTSPCMSwChannIfIdrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.2.1.1.6 |
dcvCASConfigTable SEQUENCE OF DcvCASConfigEntry .1.3.6.1.4.1.866.30.20.30.10.10.10.5 |
dcvCASConfigEntryAn entry of dcvCASConfigTable. DcvCASConfigEntry .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1 |
dcvCASConfIdro INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.1 |
dcvCASConfSignallingTransportrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.2 |
dcvCASConfCallSignallingrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.3 |
dcvCASConfDialingModerw Enumeration .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.4 |
dcvCASConfDialingTimeOutrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.5 |
dcvCASConfSigChannelDiscTimeOutrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.6 |
dcvCASConfTimeBetweenSuccOutCallrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.7 |
dcvCASConfLineInterfacePolarityrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.8 |
dcvCASConfMinLineSeizureAckTimerw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.9 |
dcvCASConfMaxLineSeizureAckTimerw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.10 |
dcvCASConfLineSeizureAckTimerw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.11 |
dcvCASConfClearToIncCallTimerw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.12 |
dcvCASConfSeizureAckPulseDurationrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.13 |
dcvCASConfMinSeizureAckPulseDurationrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.14 |
dcvCASConfDialingFormatrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.15 |
dcvCASConfInterdigitTimerw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.16 |
dcvCASConfPauseTimerw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.17 |
dcvCASConfDtmfDigitTimerw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.18 |
dcvCASConfDtmfDigitLevelrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.19 |
dcvCASConfDelayBeforeDialingrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.20 |
dcvCASConfDigitReceptionTimeOutrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.21 |
dcvCASConfEndOfDialingTimerrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.22 |
dcvCASConfToneProfilero INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.23 |
dcvCASConfIdleStaterw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.24 |
dcvCASConfAlarmStaterw INTEGER .1.3.6.1.4.1.866.30.20.30.10.10.10.5.1.25 |
dcvDigitalLines OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.30.10.15 |
dcvIfPCM OBJECT IDENTIFIER .1.3.6.1.4.1.866.30.20.30.10.15.1 |
dcvIfPCMPhysTable SEQUENCE OF DcvIfPCMPhysEntry .1.3.6.1.4.1.866.30.20.30.10.15.1.1 |
dcvIfPCMPhysEntryAn entry of dcvIfPCMPhysTable. DcvIfPCMPhysEntry .1.3.6.1.4.1.866.30.20.30.10.15.1.1.1 |
dcvIfPCMPhysIfIdro Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.1.1.1.1 |
dcvIfPCMPhysTypeIdrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.1.1.1.2 |
dcvIfPCMPhysPhysicalPortrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.1.1.1.3 |
dcvIfPCMChannelTable SEQUENCE OF DcvIfPCMChannelEntry .1.3.6.1.4.1.866.30.20.30.10.15.1.2 |
dcvIfPCMChannelEntryAn entry of dcvIfPCMChannelTable. DcvIfPCMChannelEntry .1.3.6.1.4.1.866.30.20.30.10.15.1.2.1 |
dcvIfPCMChannelIfIdro INTEGER .1.3.6.1.4.1.866.30.20.30.10.15.1.2.1.1 |
dcvIfPCMChannelStatusrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.1.2.1.2 |
dcvIfPCMChannelVoiceProfIdrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.15.1.2.1.3 |
dcvIfPCMChannelPhysIfro Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.1.2.1.4 |
dcvVoiceProfileTable SEQUENCE OF DcvVoiceProfileEntry .1.3.6.1.4.1.866.30.20.30.10.15.5 |
dcvVoiceProfileEntryAn entry of dcvVoiceProfileTable. DcvVoiceProfileEntry .1.3.6.1.4.1.866.30.20.30.10.15.5.1 |
dcvVoiceProfIdro INTEGER .1.3.6.1.4.1.866.30.20.30.10.15.5.1.1 |
dcvVoiceProfTransmitLevelrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.15.5.1.2 |
dcvVoiceProfReceiveLevelrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.15.5.1.3 |
dcvVoiceProfSilenceDetectionrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.5.1.4 |
dcvVoiceProfSilenceDetectionLevelrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.5.1.5 |
dcvVoiceProfEchoCancellationrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.5.1.6 |
dcvVoiceProfEchoCancellationLengthrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.5.1.7 |
dcvVoiceProfNoiseFramesPeriodicityrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.15.5.1.8 |
dcvVoiceProfLoopActivationrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.5.1.9 |
dcvVoiceProfFaxActivationrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.5.1.10 |
dcvVoiceProfMaximumFaxSpeedrw Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.5.1.11 |
dcvVoiceProfCESModerw Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.5.1.12 |
dcvVoiceProfCESModeAverageDelayrw INTEGER .1.3.6.1.4.1.866.30.20.30.10.15.5.1.13 |
dcvVoicePhysicalPortTable SEQUENCE OF DcvVoicePhysicalPortEntry .1.3.6.1.4.1.866.30.20.30.10.15.10 |
dcvVoicePhysicalPortEntryAn entry of dcvVoicePhysicalPortTable. DcvVoicePhysicalPortEntry .1.3.6.1.4.1.866.30.20.30.10.15.10.1 |
dcvVoicePhysPortIdro Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.10.1.1 |
dcvVoicePhysPortConnectorro Enumeration .1.3.6.1.4.1.866.30.20.30.10.15.10.1.2 |
mmxSoftware OBJECT IDENTIFIER .1.3.6.1.4.1.866.40 |
compacProxySoftware OBJECT IDENTIFIER .1.3.6.1.4.1.866.51 |
cpcManagement OBJECT IDENTIFIER .1.3.6.1.4.1.866.51.10 |
cmEvents OBJECT IDENTIFIER .1.3.6.1.4.1.866.51.10.5 |
cmeEventSynchronizeAction.rw Enumeration .1.3.6.1.4.1.866.51.10.5.4 |
cmeClearVirtualCircuitInfo OBJECT IDENTIFIER .1.3.6.1.4.1.866.51.10.5.5 |
cmeClearX121AddressThe value of this object is the X121 address of
the remote equipment.ro DisplayString .1.3.6.1.4.1.866.51.10.5.5.1 |
cmeClearCallUserDataThe value of this object is the call user data
send to the Compac management function.ro DisplayString .1.3.6.1.4.1.866.51.10.5.5.2 |
cmeClearEventThe value of this object is the type of
X25 failed connection.ro Enumeration .1.3.6.1.4.1.866.51.10.5.5.3 |
cmeClearCauseThe value of this object is the X25 clear cause
number.ro INTEGER .1.3.6.1.4.1.866.51.10.5.5.4 |
cmeClearDiagThe value of this object is the X25 clear
diagnostic number.ro INTEGER .1.3.6.1.4.1.866.51.10.5.5.5 |
cmeClearTimeStampThe value of this object is the sysUpTime at last
disconnection time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.866.51.10.5.5.6 |
cpcDiagnostic OBJECT IDENTIFIER .1.3.6.1.4.1.866.51.20 |
cdPhysicalPorts OBJECT IDENTIFIER .1.3.6.1.4.1.866.51.20.10 |
cdpIdentification OBJECT IDENTIFIER .1.3.6.1.4.1.866.51.20.10.1 |
cdpIdentPhysPortTypePhysical port typerw Enumeration .1.3.6.1.4.1.866.51.20.10.1.2 |
cpcFileTransfer OBJECT IDENTIFIER .1.3.6.1.4.1.866.51.30 |
cfFileTransferServiceFile Transfer Servicerw Enumeration .1.3.6.1.4.1.866.51.30.1 |
cfConfigurationFileToDownloadName of configuration file to downloadrw DisplayString .1.3.6.1.4.1.866.51.30.2 |
cfConfigurationFileToUploadName of file in which configuration will be
uploadedrw DisplayString .1.3.6.1.4.1.866.51.30.3 |
cfSoftwareFileToDownloadName of software file to downloadrw DisplayString .1.3.6.1.4.1.866.51.30.4 |
cfStartUpChoiceAfterResetChoice of start up after resetrw Enumeration .1.3.6.1.4.1.866.51.30.5 |
cfModuleToIdentifySelection of module for hardware identificationrw Enumeration .1.3.6.1.4.1.866.51.30.6 |
cfZoneToIdentifySelection of zone for hardware identificationrw Enumeration .1.3.6.1.4.1.866.51.30.7 |
cfHardwareIdentificationPasswordrw DisplayString .1.3.6.1.4.1.866.51.30.8 |
cfSoftwareListPasswordrw DisplayString .1.3.6.1.4.1.866.51.30.9 |
cfServiceReportReport after service executionro Enumeration .1.3.6.1.4.1.866.51.30.10 |
cfVersionVersion of equipment returned by software
identificationro DisplayString .1.3.6.1.4.1.866.51.30.11 |
cfRevisionRevision of equipment returned by software
identificationro DisplayString .1.3.6.1.4.1.866.51.30.12 |
cfEditionEdition of equipment returned by software
identificationro DisplayString .1.3.6.1.4.1.866.51.30.13 |
cfCpuBoardTypeType of CPU board returned by software
identificationro DisplayString .1.3.6.1.4.1.866.51.30.14 |
cfProductTypeType of product returned by software
identificationro DisplayString .1.3.6.1.4.1.866.51.30.15 |
cfConfigurationVersionVersion of configuration returned by software
identificationro DisplayString .1.3.6.1.4.1.866.51.30.16 |
cfConfigurationReleaseRelease of configuration returned by software
identificationro DisplayString .1.3.6.1.4.1.866.51.30.17 |
cfConfigurationEditionEdition of configuration returned by software
identificationro DisplayString .1.3.6.1.4.1.866.51.30.18 |
cfConfigurationDateDate of configuration returned by software
identificationro DisplayString .1.3.6.1.4.1.866.51.30.19 |
cfUserFieldUser field returned by software identificationro DisplayString .1.3.6.1.4.1.866.51.30.20 |
cf12NcNumber3512NC Number in 35xxxx returned by software
identificationro DisplayString .1.3.6.1.4.1.866.51.30.21 |
cf12NcNumber7512NC Number in 75xxxx returned by software
identificationro DisplayString .1.3.6.1.4.1.866.51.30.22 |
cfField1Field 1 returned by hardware identificationro DisplayString .1.3.6.1.4.1.866.51.30.23 |
cfField2Field 2 returned by hardware identificationro DisplayString .1.3.6.1.4.1.866.51.30.24 |
cfField3Field 3 returned by hardware identificationro DisplayString .1.3.6.1.4.1.866.51.30.25 |
cfField4Field 4 returned by hardware identificationro DisplayString .1.3.6.1.4.1.866.51.30.26 |
cfFlashSizeFlash size returned by hardware identificationro DisplayString .1.3.6.1.4.1.866.51.30.27 |
cfRamSizeRAM size returned by hardware identificationro DisplayString .1.3.6.1.4.1.866.51.30.28 |
cfEepromSizeEEPROM size returned by hardware identificationro DisplayString .1.3.6.1.4.1.866.51.30.29 |
cfNumberOfLinesNumber of lines returned by hardware
identificationro DisplayString .1.3.6.1.4.1.866.51.30.30 |
cfTransputerPresencePresence of transputer on board returned by hardware
identificationro OCTET STRING .1.3.6.1.4.1.866.51.30.31 |
cfMpbBoardReference255Reference 255xxxx of the MPB returned by hardware
identificationro DisplayString .1.3.6.1.4.1.866.51.30.32 |
cfMpbBoardSerialNumberSerial number of the MPB board returned by
hardware identificationro DisplayString .1.3.6.1.4.1.866.51.30.33 |
cfMtbBoardReference255Reference 255xxxx of the MTB returned by hardware
identificationro DisplayString .1.3.6.1.4.1.866.51.30.34 |
cfMtbBoardSerialNumberSerial number of the MTB board returned by
hardware identificationro DisplayString .1.3.6.1.4.1.866.51.30.35 |
cfReleaseDateRelease date returned by hardware identificationro DisplayString .1.3.6.1.4.1.866.51.30.36 |
cfFactoryReturnDate1Factory return date number 1 returned by hardware
identificationro DisplayString .1.3.6.1.4.1.866.51.30.37 |
cfFactoryReturnDate2Factory return date number 2 returned by hardware
identificationro DisplayString .1.3.6.1.4.1.866.51.30.38 |
cfFactoryReturnDate3Factory return date number 3 returned by hardware
identificationro DisplayString .1.3.6.1.4.1.866.51.30.39 |
cfFactoryReturnDate4Factory return date number 4 returned by hardware
identificationro DisplayString .1.3.6.1.4.1.866.51.30.40 |
cfFactoryReturnDate5Factory return date number 5 returned by hardware
identificationro DisplayString .1.3.6.1.4.1.866.51.30.41 |
cfSoftwareListList of software (user's right)ro DisplayString .1.3.6.1.4.1.866.51.30.42 |