Home/Catalog/PBC-GENERIC-MIB

PBC-GENERIC-MIB

This module defines management objects which are common to all PBC chassis/system products.
Main OID:
pbcGenericSystemMib.1.3.6.1.4.1.5987.1.1.1
43
Objects
Active
Status
5
Dependencies

Imported Objects

Objects

43 total
Object Name
pbcGenericSystemMibThis module defines management objects which are common to all PBC chassis/system products.
MODULE-IDENTITY
.1.3.6.1.4.1.5987.1.1.1
pbcGeneric
OBJECT IDENTIFIER
.1.3.6.1.4.1.5987.2.1
pbcChassis
OBJECT IDENTIFIER
.1.3.6.1.4.1.5987.2.1.1
pbcChassisEntityIndexentPhysicalIndex of the chassis' entry in the Entity MIB's (RFC2737) entPhysicalTable or '0', if none.ro
Unsigned32
.1.3.6.1.4.1.5987.2.1.1.1
pbcChassisOperStatusChassis' current operational status.ro
Enumeration
.1.3.6.1.4.1.5987.2.1.1.2
pbcChassisSlotsNumber of slots in this chassis, or '0' if neither applicable nor determinable.ro
Unsigned32
.1.3.6.1.4.1.5987.2.1.1.3
pbcContactInfoPacific Broadband contact information.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5987.2.1.1.4
pbcHostNameName of this system.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5987.2.1.1.5
pbcDomainNameDomain name for this host.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5987.2.1.1.6
pbcDateTimeOfLastChangeDate and time of last change to either the configuration or the software.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.5987.2.1.1.7
pbcCardIfIndexTableNumEntriesNumber of entries currently in the pbcCardIfIndexTable. This should be the same number as there are entries in the ifTable.ro
Unsigned32
.1.3.6.1.4.1.5987.2.1.1.8
pbcCardIfIndexTableFor each ifIndex currently exposed by the system, this table will provide an association to the physical and logical objects which are related to it.
SEQUENCE OF PbcCardIfIndexEntry
.1.3.6.1.4.1.5987.2.1.1.9
pbcCardIfIndexEntryOne ifIndex mapping entry.
PbcCardIfIndexEntry
.1.3.6.1.4.1.5987.2.1.1.9.1
pbcCardIfCardIndexIndex of the card in the Chassis pbcCardTable which contains this interface or '0' if not applicable.ro
Unsigned32
.1.3.6.1.4.1.5987.2.1.1.9.1.1
pbcCardIfPortNumberChassis port number, unique per port on a given card for the same interface type. If pbcCardIfPortNumber is not applicable to the card, then the object instance won't be populated.ro
Unsigned32
.1.3.6.1.4.1.5987.2.1.1.9.1.2
pbcCardIfPortTypeThe type of port associated with this ifIndex: 0 = Not Applicable 1 = Downstream 2 = Upstream 3 = Fast Ethernet 4 = Gigabit Ethernet 5 = 10 Gigabit Ethernet 6 = RS-232ro
PortType
.1.3.6.1.4.1.5987.2.1.1.9.1.3
pbcCardIfSlotNumberChassis slot number, or '0' if neither applicable nor determinable.ro
Unsigned32
.1.3.6.1.4.1.5987.2.1.1.9.1.4
pbcCardIfPortIndexThe system unique port index number for the physical port associated with this ifIndex.ro
Unsigned32
.1.3.6.1.4.1.5987.2.1.1.9.1.5
pbcCardTableNumEntriesNumber of entries currently in the pbcCardTable.ro
Unsigned32
.1.3.6.1.4.1.5987.2.1.1.10
pbcCardTableChassis card table.
SEQUENCE OF PbcCardEntry
.1.3.6.1.4.1.5987.2.1.1.11
pbcCardEntryInstalled card types are enumerated here. These entries should not be removed when a card is ejected from the system. The pbcCardOperStatus of the ejected cards should be set to notPreset (8).
PbcCardEntry
.1.3.6.1.4.1.5987.2.1.1.11.1
pbcCardSlotNumberSlot number relative to the containing card or chassis, or '0' if neither applicable nor determinable.ro
Unsigned32
.1.3.6.1.4.1.5987.2.1.1.11.1.1
pbcCardEntityIndexentPhysicalIndex of this card's entry in the Entity MIB's (RFC2737) entPhysicalTable or '0', if none.ro
Unsigned32
.1.3.6.1.4.1.5987.2.1.1.11.1.2
pbcCardAdminStatusThe desired state of the card. When a card/module initializes, its initial pbcCardAdminStatus is down(2). As a result of either explicit management action or per configuration information retained by the managed system, pbcCardAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state). If a management application writes reset(4) to this object, the card will initiate a full re-initialization.rw
Enumeration
.1.3.6.1.4.1.5987.2.1.1.11.1.3
pbcCardOperStatusThe operational status of the card. The pbcCardOperStatus is operational(2) when a card is recognized by the device and is enabled for operation. pbcCardOperStatus is disabled(3) if the card is not recognized by the device, or if it is not enabled for operation. pbcCardOperStatus is standby(4) if the card is enabled and acting as a standby/redundant slave. pbcCardOperStatus is testing (5) when the card is in the diagnostic mode. pbcCardOperStatus is failure (6) if a hardware or software failure is recognized. pbcCardOperStatus is initializing (7) when the card is booting up and not ready to accept any external c onfiguration. pbcCardOperStatus is notPresent (8) if the card has been removed from the system.ro
Enumeration
.1.3.6.1.4.1.5987.2.1.1.11.1.4
pbcCardUpTimeThe value of sysUpTime for this management entity, when this card was last (re-)initialized.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.5987.2.1.1.11.1.5
pbcCardnvRAMSizeAmount of non-volatile RAM in bytes.ro
Unsigned32
.1.3.6.1.4.1.5987.2.1.1.11.1.6
pbcCardNumPortsNumber of ports on this card, or '0' if no ports or not applicable or determinable.ro
Unsigned32
.1.3.6.1.4.1.5987.2.1.1.11.1.7
pbcCardTypeThe card type of the card. Here are the various types of cards supported: ccm -Chassis Control Module dm - DOCSIS Module nic - Network Interface Module rim - Redundant Rear I/O Module sim - Switching Rear I/O Module There may be one or two cards in one slot - one in front and the other in the rear of the midplane.ro
Enumeration
.1.3.6.1.4.1.5987.2.1.1.11.1.8
pbcCardPositionThe position of the card relative to the midplane. The pbcCardTable may contain one or two entry per slot. If there are two entries present per slot, then the pbcCardPosition of one should have the value front (2) and the other should have the value rear (2).ro
Enumeration
.1.3.6.1.4.1.5987.2.1.1.11.1.9
pbcCardPortTableDescribes the ports on a particular card and their current status.
SEQUENCE OF PbcCardPortEntry
.1.3.6.1.4.1.5987.2.1.1.12
pbcCardPortEntryPort characteristics comprising an entry in the table. These entries should not be removed when a card is ejected from the system. The pbcCardPortStatus of the ejected cards should be set to notPreset (5).
PbcCardPortEntry
.1.3.6.1.4.1.5987.2.1.1.12.1
pbcCardPortStatusThe current operational status of this port. pbcCardPortStatus is active(2) when a port is enabled for operation. pbcCardPortStatus is disabled(3) if the port is not enabled for operation. pbcCardPortStatus is standby(4) if the port is on a card is acting as a standby. The pbcCardPortStatus is not-present(5) if the card containing the port has been removed from the system.ro
Enumeration
.1.3.6.1.4.1.5987.2.1.1.12.1.1
pbcCardPortEntityIndexentPhysicalIndex of this port's entry in the Entity MIB's (RFC2737) entPhysicalTable or '0', if none.ro
Unsigned32
.1.3.6.1.4.1.5987.2.1.1.12.1.2
pbcCardPortAliasAlias name for the port as specified by a network manager. On the first instantiation of the interface, the value of the pbcCardPortAlias is zero-length string. When a value is written into an instance of the pbcCardPortAlias through a set operation, then the agent must retain the supplied value as long as the port remains instantiated, including across all re-initializations and reboots of the system.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.5987.2.1.1.12.1.3
pbcPortIfTableLists the interfaces (ifIndex values) associated with a specific port.
SEQUENCE OF PbcPortIfEntry
.1.3.6.1.4.1.5987.2.1.1.13
pbcPortIfEntryAn entry in the pbcPortIfEntry table. For each port number within the system, assigned by the chassis CCM, there is one entry for each IfIndex associated with that port. If no interfaces are associated with this port, then an entry with a portIfIndex value of -1 will appear in this table.
PbcPortIfEntry
.1.3.6.1.4.1.5987.2.1.1.13.1
pbcPortIfIndexifIndex associated with this port or '-1', if none.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.5987.2.1.1.13.1.1
pbcGenericConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.5987.2.1.2
pbcGenericGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.5987.2.1.2.1
pbcChassisGroupObjects associated with generic PBC chassis management.
Unknown
.1.3.6.1.4.1.5987.2.1.2.1.1
pbcGenericCompliance
OBJECT IDENTIFIER
.1.3.6.1.4.1.5987.2.1.2.2
pbcGenericBasicComplianceGroup support required for basic level compliance.
Unknown
.1.3.6.1.4.1.5987.2.1.2.2.1
PBC-GENERIC-MIB - SNMP MIB Reference | MIBs Explorer