Home/Catalog/OpticsIMETS-MIB

OpticsIMETS-MIB

AI MIB Summary

The OpticsIMETS-MIB module manages optical transport network cross-connects and flow services by monitoring circuit emulation service (CES) parameters and service type enumerations within the IMETS architecture. It specifically tracks XConnected table entries and flow service types to facilitate the configuration and status verification of TDM-over-Packet transport links.

TSDnm93270 (change by D. Ricco) Changes the definition of the following modes: - OpticsIMETSInFlowServiceType, - OpticsIMETSOutFlowServerType - OpticsIMETSFlowServiceType with addition of new values (ces, ces-pb, ces-pw) to the enumerative set (applicability for Circuit emulation service). Changed description of opticsIMETSCrossConnectServiceTypeIndex of opticsIMETSCrossConnectServiceTypeEntry for XConnected table per service type
Main OID:
opticsIMETSMib.1.3.6.1.4.1.637.54.1.25.3
273
Objects
Active
Status
6
Dependencies

Imported Objects

OPTICSIM-ETHREG-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
IF-MIB
TSDIM-SNMP-TC

Objects

273 total
Object Name
opticsIMETSMibTSDnm93270 (change by D. Ricco) Changes the definition of the following modes: - OpticsIMETSInFlowServiceType, - OpticsIMETSOutFlowServerType - OpticsIMETSFlowServiceType with addition of new values (ces, ces-pb, ces-pw) to the enumerative set (applicability for Circuit emulation service). Changed description of opticsIMETSCrossConnectServiceTypeIndex of opticsIMETSCrossConnectServiceTypeEntry for XConnected table per service type
MODULE-IDENTITY
.1.3.6.1.4.1.637.54.1.25.3
opticsIMETSObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.637.54.1.25.3.1
opticsIMETSTrafficDescrIndexNextThis object contains an appropriate value to be used for opticsIMETSTrafficDescrIndex when creating entries in the opticsIMETSTrafficDescrTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSTrafficDescrIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.1
opticsIMETSTrafficDescrTableThis table contains information on ETS Traffic Descriptor type and the associated parameters.
SEQUENCE OF OpticsIMETSTrafficDescrEntry
.1.3.6.1.4.1.637.54.1.25.3.1.2
opticsIMETSTrafficDescrEntryAn entry of the opticsIMETSTrafficDescrTable.
OpticsIMETSTrafficDescrEntry
.1.3.6.1.4.1.637.54.1.25.3.1.2.1
opticsIMETSTrafficDescrIndexThis object is used by the opticsIMETSInFlowTable to identify the row of this table. When creating a new row in the table the value of this index may be obtained by retrieving the value of opticsIMETSTrafficDescrIndexNext. The range is 1..MAXTrafficDescr, where MAXTrafficDescr is product dependent and it will be specified in the product specification document.
OpticsIMETSTrafficDescrIndex
.1.3.6.1.4.1.637.54.1.25.3.1.2.1.1
opticsIMETSTrafficDescrTypeThe value of this object identifies the type of ETS Traffic Descriptor with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: opticsIMETSTrafficDescrParam1 opticsIMETSTrafficDescrParam2 opticsIMETSTrafficDescrParam3 opticsIMETSTrafficDescrParam4 opticsIMETSTrafficDescrParam5.rw
OpticsIMETSTrafficDescrType
.1.3.6.1.4.1.637.54.1.25.3.1.2.1.2
opticsIMETSTrafficDescrParam1The first parameter of the ETS Traffic used according to the value of opticsIMETSTrafficDescrType.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.2.1.3
opticsIMETSTrafficDescrParam2The second parameter of the ETS Traffic used according to the value of opticsIMETSTrafficDescrType.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.2.1.4
opticsIMETSTrafficDescrParam3The third parameter of the ETS Traffic used according to the value of opticsIMETSTrafficDescrType.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.2.1.5
opticsIMETSTrafficDescrParam4The fourth parameter of the ETS Traffic used according to the value of opticsIMETSTrafficDescrType.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.2.1.6
opticsIMETSTrafficDescrParam5The fifth parameter of the ETS Traffic used according to the value of opticsIMETSTrafficDescrType.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.2.1.7
opticsIMETSTrafficDescrUserLabelThe canonical name assigned to the traffic descriptor.rw
OpticsIMUserLabel (TSDIM-SNMP-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.2.1.8
opticsIMETSTrafficDescrRowStatusThis object is used to create a new row or modify or delete an existing row in this table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.2.1.9
opticsIMETSTrafficDescrAdmittedMcRateThis attribute carries out 'on per flow basis' ingress admitted multicast rate (the threshold value of admitted bandwidth for NE generated multicast traffic as admitted on per <ingress interface, ingress flow> basis) and is specified in kilobits per second (Kbps). This value is requested to trigger discarding of NE generated multicast traffic received on this ingress interface and is minor or equal to that specified in ifSpeed for this interface. ifSpeed value for this attribute means that the multicast rate limitation on <ingress interface, ingress flow> basis is disabled; this is the default value. Null value for this attribute means discarding of NE generated multicast traffic associated to <ingress interface, ingress flow> logical pairrw
Gauge32
.1.3.6.1.4.1.637.54.1.25.3.1.2.1.10
opticsIMETSTrafficDescrAdmittedUnknRateThis attribute carries out 'on per flow basis' ingress admitted unknown traffic rate (the threshold value of admitted bandwidth for unknown traffic as admitted on per <ingress interface, ingress flow> basis) and is specified in kilobits per second (Kbps). This value is requested to trigger discarding of unknown traffic on this ingress interface and is minor or equal to that specified in ifSpeed for this interface. ifSpeed value for this attribute means that the unknown traffic rate limitation on <ingress interface, ingress flow> basis is disabled; this is the default value. Null value for this attribute means discarding of NE unknown traffic associated to <ingress interface, ingress flow> logical pairrw
Gauge32
.1.3.6.1.4.1.637.54.1.25.3.1.2.1.11
opticsIMETSTrafficDescrMcTypeThe value of this object identifies the type of ETS Traffic Descriptor for Multicast Traffic. Default value: ETS Traffic descriptor type assigned to Unicast Trafficrw
OpticsIMETSTrafficDescrType
.1.3.6.1.4.1.637.54.1.25.3.1.2.1.12
opticsIMETSTrafficDescrUnknTypeThe value of this object identifies the type of ETS Traffic Descriptor for Unknown Traffic. Default value: ETS Traffic descriptor type assigned to Unicast Trafficrw
OpticsIMETSTrafficDescrType
.1.3.6.1.4.1.637.54.1.25.3.1.2.1.13
opticsIMETSInFlowIndexNextThis object contains an appropriate value to be used for opticsIMETSInFlowIndex when creating entries in the opticsIMETSInFlowTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSInFlowIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.3
opticsIMETSInFlowTableThis table specifies informations regarding ETS ingress flow.
SEQUENCE OF OpticsIMETSInFlowEntry
.1.3.6.1.4.1.637.54.1.25.3.1.4
opticsIMETSInFlowEntryAn entry of the opticsIMETSInFlowTable.
OpticsIMETSInFlowEntry
.1.3.6.1.4.1.637.54.1.25.3.1.4.1
opticsIMETSInFlowIndexIndex for the conceptual row identifying a flow within this ETS ingress flow table. The range is 1..MAXInFlow, where MAXInFlow is product dependent and it will be specified in the product specification document.
OpticsIMETSFlowIndex
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.1
opticsIMETSInFlowServiceTypeIt indicates the service type to be carried over this flow. The default value is 'ethernet'.rw
OpticsIMETSInFlowServiceType
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.2
opticsIMETSInFlowServiceIDThis object contains an appropriate value service type dependent. If the opticsIMInFlowServiceType is equal to 'ethernet', this object is used to specify the ifIndex of the Ethernet port associated with this flow. If the opticsIMInFlowServiceType is equal to 'mpls', this object is used to specify the opticsIMMPLS2ETSMappingIndex of the opticsIMMPLS2ETSMappingTable. If the opticsIMInFlowServiceType is equal to 'providerBridge',this object is used to specify the opticsIMSVLAN2ETSMappingIndex of the opticsIMSVLAN2ETSMappingTable. If the opticsIMInFlowServiceType is equal to 'pbb', this object is used to specify PBB Instance Entry associated with this flow. The default value is 0 and indicates that this object is not yet set.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.3
opticsIMETSInFlowUserLabelThe canonical user label assigned to the flow.rw
OpticsIMUserLabel (TSDIM-SNMP-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.4
opticsIMETSInFlowTrafficDescrIt identifies the row in the opticsIMETSTrafficDescrTable which applies to the ETS flow, both in input and output direction.rw
OpticsIMETSTrafficDescrIndex
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.5
opticsIMETSInFlowTypeThis object is used to specify the flow type. The value 'unicastAutolearning(1)' is possible only if opticsIMETSInFlowServiceType is equal to 'ethernet(1)'. The default value is 'unicastNoAutolearning'.rw
OpticsIMETSFlowType
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.6
opticsIMETSInFlowPolicingModeIt defines the ETS Policing Mode. By default, policing is 'colorBlind'.rw
OpticsIMETSPolicingMode
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.7
opticsIMETSInFlowCrossConnectIdentifierThis object indicates that an ingress flow is cross-connected to other egress flows that belong to the same flow. All such associated ingress and egress flows have the same value of this object, and all their cross-connections are identified by entries in the opticsIMETSCrossConnectTable for which opticsIMETSCrossConnectIndex has the same value. The value of this object is initialized by the agent after the associated entries in the opticsIMETSCrossConnectTable have been created. The value '0' indicates that this object in not yet used in a cross-connection.ro
Integer32
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.8
opticsIMETSInFlowRowStatusFor creating, modifying, and deleting this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.9
opticsIMETSInFlowVlanPopIt enables/ disables the VLAN Pop Configuration. The value of this object is meaningful only if opticsIMETSInFlowServiceType is 'ethernet'. The default value is 'disabled'.rw
OpticsIMVlanConfiguration
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.10
opticsIMETSInFlowColorProfilePointerThis object points to a row in the opticsIMColorProfileTable. It defines the Color Profile associated with priority bits in the 'colorAware' mode. The value of this object is meaningful only if opticsIMETSInFlowServiceType is 'ethernet'. A value of 0 indicates that no Color Profile has been associated with this InFlow and then the 'colorBlind' mode is used. The default value is 0.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.11
opticsIMETSInFlowLayer2ProtocolListThis parameter enables to choose if to tunnel, toward a Provider Network, or filter data and Layer 2 Control frames. If the bit is 1 it indicates that the relative frame will be tunneled otherwise if 0 it will be discarded. Default value is all bits set to 1, so tunneling everything. This parameter is significant only if the ServiceType is 'ethernet'.rw
OpticsIMLayer2ProtocolList
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.12
opticsIMETSInFlowL2ActualProtocolListThis parameter reports weather a Data or a Layer 2 Control frame will be tunneled, toward a Provider Network, or filtered. If the bit is 1 it indicates that the relative frame will be tunneled otherwise if 0 it will be discarded. This parameter is significant only if the ServiceType is 'ethernet'. In this case, the value is obtained as a logical AND between the object opticsIMETSInFlowLayer2ProtocolList and the object opticsIMEthLayer2ProtocolList in the OpticsIMEthConfTable in the row with ifIndex=opticsIMETSInFlowServiceID.ro
OpticsIMLayer2ProtocolList
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.13
opticsIMETSInFlowGroupIDThis parameter defines the ETS Flow Group this ETS Input Flow belongs to. The value 0 represents the case where the ETS Flow does not belong to any ETS Flow Group. The default value is 0.rw
Integer32
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.14
opticsIMETSInFlowClassificationModeThis object is used to define the type of classification on incoming frames: either by priority bits or by Ip Dscp bits. It also allows a related classification check between the values written in opticsIMEth2ETSFlowClassifierTable and in opticsIMETSColorProfileTable. The default value is priority(0).rw
OpticsIMETSclassMode
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.15
opticsIMETSInFlowUseDEIThis object contains information about DEI Use (Default value: false) on incoming S-Tagged frames. The value of this object is meaningful only if opticsIMETSInFlowServiceType is 'ethernet'rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.16
opticsIMETSInFlowControlWordThis parameter enables the usage of the Martini Control Word when decapsulating Ethernet over MPLS. Default value is False. This parameter is significant only if the ServiceType is 'mpls'rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.4.1.17
opticsIMETSOutFlowIndexNextThis object contains an appropriate value to be used for opticsIMETSOutFlowIndex when creating entries in the opticsIMETSOutFlowTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSOutFlowIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to reflect the next unassigned index.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.5
opticsIMETSOutFlowTableThis table contains information about ETS egress flow.
SEQUENCE OF OpticsIMETSOutFlowEntry
.1.3.6.1.4.1.637.54.1.25.3.1.6
opticsIMETSOutFlowEntryAn entry of the opticsIMETSOutFlowTable.
OpticsIMETSOutFlowEntry
.1.3.6.1.4.1.637.54.1.25.3.1.6.1
opticsIMETSOutFlowIndexA unique value to identify the egress flow. The range is 1..MAXOutFlow, where MAXOutFlow is product dependent and it will be specified in the product specification document.
OpticsIMETSFlowIndex
.1.3.6.1.4.1.637.54.1.25.3.1.6.1.1
opticsIMETSOutFlowServerTypeSet by the operator to indicate the PSN type on which this flow will be carried. The default value is 'ethernet'.rw
OpticsIMETSOutFlowServerType
.1.3.6.1.4.1.637.54.1.25.3.1.6.1.2
opticsIMETSOutFlowServerIDThis object contains an appropriate value server type dependent. If the opticsIMOutFlowServerType is equal to 'ethernet', this object is used to specify the ifIndex of the Ethernet port associated with this flow. If the opticsIMOutFlowServerType is equal to 'mpls', this object is used to specify the opticsIMETS2MPLSMappingIndex of the opticsIMETS2MPLSMappingTable. If the opticsIMOutFlowServerType is equal to 'providerBridge',this object is used to specify the opticsIMETS2SVLANMappingIndex of the opticsIMETS2SVLANMappingTable. If the opticsIMOutFlowServerType is equal to 'pbb', this object is used to specify Optics PBB Instance Entry associated with this flow. The default value is 0 and indicates that this object is not yet set.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.6.1.3
opticsIMETSOutFlowUserLabelThe canonical user label assigned to the flow.rw
OpticsIMUserLabel (TSDIM-SNMP-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.6.1.4
opticsIMETSOutFlowCrossConnectIdentifierThis object indicates that an egress flow is cross-connected to another ingress flow that belong to the same flow. All such associated ingress and egress flows have the same value of this object, and all their cross-connections are identified by entries in the opticsIMETSCrossConnectTable for which opticsIMETSCrossConnectIndex has the same value. The value of this object is initialized by the agent after the associated entries in the opticsIMETSCrossConnectTable have been created. The value '0' indicates that this object in not yet used in a cross-connection.ro
Integer32
.1.3.6.1.4.1.637.54.1.25.3.1.6.1.5
opticsIMETSOutFlowRowStatusFor creating, modifying, and deleting this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.6.1.6
opticsIMETSOutFlowVlanStackPointerThis object points to a row in the opticsIMETSVlanStackConfTable. It defines the Vlan Stack Configuration. The value of this object is meaningful only if opticsIMETSOutFlowServerType is 'ethernet'. A value of 0 indicates that no Vlan Push has been associated with this OutFlow. The default value is 0.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.6.1.7
opticsIMETSOutFlowControlWordThis parameter enables the usage of the Martini Control Word when encapsulating Ethernet over MPLS. Default value is False. This parameter is significant only if the ServerType is 'mpls'rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.6.1.8
opticsIMETSCrossConnectIndexNextThis object contains an appropriate value to be used for opticsIMETSCrossConnectIndex when creating entries in the opticsIMETSCrossConnectTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSCrossConnectIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to replect the next unassigned index.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.7
opticsIMETSCrossConnectTableThe ETS Cross Connect table. An ETS cross-connection which cross-connects an ingress and one or more egress flow is modeled as one entry in this table.
SEQUENCE OF OpticsIMETSCrossConnectEntry
.1.3.6.1.4.1.637.54.1.25.3.1.8
opticsIMETSCrossConnectEntryAn entry of the opticsIMETSCrossConnectTable.
OpticsIMETSCrossConnectEntry
.1.3.6.1.4.1.637.54.1.25.3.1.8.1
opticsIMETSCrossConnectIndexA unique value to identify this ETS cross-connect. The range is 1..MAXCrossConnect, where MAXCrossConnect is product dependent and it will be specified in the product specification document.
Integer32
.1.3.6.1.4.1.637.54.1.25.3.1.8.1.1
opticsIMETSCrossConnectInFlowIndexThe value of this object is equal to opticsIMETSInFlowIndex value of opticsIMETSInFlowTable.
OpticsIMETSFlowIndex
.1.3.6.1.4.1.637.54.1.25.3.1.8.1.2
opticsIMETSCrossConnectOutFlowIndexThe value of this object is equal to opticsIMETSOutFlowIndex value of opticsIMETSOutFlowTable.
OpticsIMETSFlowIndex
.1.3.6.1.4.1.637.54.1.25.3.1.8.1.3
opticsIMETSCrossConnectRowStatusFor creating, modifying, and deleting this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.8.1.4
opticsIMEth2ETSFlowClassifierIndexNextThis object contains an appropriate value to be used for opticsIMEth2ETSFlowClassifierIndex when creating entries in the opticsIMEth2ETSFlowClassifierTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMEth2ETSFlowClassifierIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to replect the next unassigned index.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.9
opticsIMEth2ETSFlowClassifierTableThis table provides Ethernet port mapping, Ethernet type content value, VLAN and priority or IpDscp configuration for each Ethernet ingress flow. This table is indexed by the same index that was created for the associated entry of the opticsIMETSInFlowTable. The opticsIMETSInFlowIndex and the opticsIMEth2ETSFlowClassifierIndex are used as indexes. One or more entries are created in this table by the manager only if there is an antry in the opticsIMETSInFlowTable with an opticsIMETSInFlowServiceType equal to 'ethernet'.
SEQUENCE OF OpticsIMEth2ETSFlowClassifierEntry
.1.3.6.1.4.1.637.54.1.25.3.1.10
opticsIMEth2ETSFlowClassifierEntryAn entry of the opticsIMEth2ETSFlowClassifierTable.
OpticsIMEth2ETSFlowClassifierEntry
.1.3.6.1.4.1.637.54.1.25.3.1.10.1
opticsIMEth2ETSFlowClassifierInFlowIndexThe value of this object is equal to opticsIMETSInFlowIndex value of opticsIMETSInFlowTable.
OpticsIMETSFlowIndex
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.1
opticsIMEth2ETSFlowClassifierIndexA unique value to identify this Flow Classifier. The range is 1..MAXFlowClassifier, where MAXFlowClassifier is product dependent and it will be specified in the product specification document.
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.2
opticsIMEth2ETSFlowClassifierVlanThis object defines the VLAN on the ETS flow. The default value is 4097.rw
OpticsIMETSVlanCfg
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.3
opticsIMEth2ETSFlowClassifierMaxVlanThis object is used to define the MAX value of VLAN range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierVlan. If a range is not used the value must be set to 0. The default value is 0.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.4
opticsIMEth2ETSFlowClassifierPriorityThis object defines the groups of user priority mapped into the ingress flow. The default value is 'dontCare'.rw
OpticsmIMETSPriority
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.5
opticsIMEth2ETSFlowClassifierMaxPriorityThis object is used to define the MAX value of priority range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierPriority. If a range is not used the value must be set to 0. The default value is 0.rw
Enumeration
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.6
opticsIMEth2ETSFlowClassifierRowStatusEnable creating, deleting and modifying this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.7
opticsIMEth2ETSFlowClassifierIpDscpThis object defines the groups of user Ip Dscp values mapped into the ingress flow. The default value is 'dontCare'.rw
OpticsIMETSIpDscp
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.8
opticsIMEth2ETSFlowClassifierMaxIpDscpThis object is used to define the MAX value of Ip Dscp range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierIpDscp. If a range is not used the value must be set to 0. The default value is 0.rw
Enumeration
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.9
opticsIMEth2ETSFlowClassifierEthTypeThis object defines the group of Ethernet Type mapped into the ingress flow. The possible values and the related meanings for them are contained in the Functionality Specification document. The default value is 0, that means 'dontCare'.rw
INTEGER
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.10
opticsIMEth2ETSFlowClassifierVridThis object defines the VRID [Configurable item in the range 1-255 (decimal)] on the ETS flow. VRID is last byte in virtual router MAC address as in rfc3768. The virtual router MAC address associated with a virtual router is an IEEE 802 MAC Address in the following format: 0-00-5E-00-01-{VRID} (in hex in internet standard bit-order) The first three octets are derived from the IANA's OUI. The next two octets (00-01) indicate the address block assigned to the VRRP protocol. {VRID} is the VRRP Virtual Router Identifier. This mapping provides for up to 255 VRRP routers on a network. Default value is 256rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.11
opticsIMEth2ETSFlowClassifierMaxVridThis object is used to define the MAX value of VRID range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierVrid. If a range is not used the value must be set to 0. The default value is 0.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.12
opticsIMEth2ETSFlowClassifierVpiThis object defines ATM VPI on the ETS flow. The default value is 4096.rwdeprecated
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.13
opticsIMEth2ETSFlowClassifierMaxVpiThis object is used to define the MAX value of ATM VPI range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierVpi. If a range is not used the value must be set to 0. The default value is 0.rwdeprecated
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.14
opticsIMEth2ETSFlowClassifierVciThis object defines ATM VCI on the ETS flow. The default value is 65536.rwdeprecated
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.15
opticsIMEth2ETSFlowClassifierMaxVciThis object is used to define the MAX value of ATM VCI range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierVci. If a range is not used the value must be set to 0. The default value is 0.rwdeprecated
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.16
opticsIEth2ETSFlowClassifierSourceMacAddrIt indicates the 48 bits source MAC address. The specified source mac of the packet The packet's source mac address is AND-ed with the value of FlowClassifierSourceMacAddrBitmask and then compared against the value of this object.rw
OCTET STRING
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.17
opticsIEth2ETSFlowClassifierSourceMacAddrBitmaskThe specified source mac address mask. If it is not configured, the default value is all 1rw
OCTET STRING
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.18
opticsIEth2ETSFlowClassifierDestMacAddrIt indicates the 48 bits destination MAC address. The specified destination mac of the packet The packet's destination mac address is AND-ed with the value of FlowClassifierDestMacAddrBitmask and then compared against the value of this object.rw
OCTET STRING
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.19
opticsIEth2ETSFlowClassifierDestMacAddrBitmaskThe specified destination mac address mask. If it is not configured, the default value is all 1rw
OCTET STRING
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.20
opticsIMEth2ETSFlowClassifierInnerVlanThis object defines the Inner VLAN on the ETS flow. The default value is 4097.rw
OpticsIMETSVlanCfg
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.21
opticsIMEth2ETSFlowClassifierMaxInnerVlanThis object is used to define the MAX value of Inner VLAN range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierVlan. If a range is not used the value must be set to 0. The default value is 0.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.22
opticsIMEth2ETSFlowClassifierInnerPriorityThis object defines the groups of Inner user priority mapped into the ingress flow. The default value is 'dontCare'.rw
OpticsmIMETSPriority
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.23
opticsIMEth2ETSFlowClassifierMaxInnerPriorityThis object is used to define the MAX value of Inner priority range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierPriority. If a range is not used the value must be set to 0. The default value is 0.rw
Enumeration
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.24
opticsIEth2ETSFlowClassifierSourceIPV4AddrIt indicates the 32 bits source IP address. The specified source IP of the packet The packet's source IP address is AND-ed with the value of FlowClassifierSourceIPV4AddrBitmask and then compared against the value of this object.rw
OCTET STRING
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.25
opticsIEth2ETSFlowClassifierSourceIPV4AddrBitmaskThe specified source IPv4 address mask. If it is not configured, the default value is all 0.rw
OCTET STRING
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.26
opticsIEth2ETSFlowClassifierDestIPV4AddrIt indicates the 32 bits destination IPv4 address. The specified destination mac of the packet The packet's destination IPv4 address is AND-ed with the value of FlowClassifierDestIPV4AddrBitmask and then compared against the value of this object.rw
OCTET STRING
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.27
opticsIEth2ETSFlowClassifierDestIPV4AddrBitmaskThe specified destination IPv4 address mask. If it is not configured, the default value is all 0.rw
OCTET STRING
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.28
opticsIEth2ETSFlowClassifierL4PortTypeThis object specifies L4 port protocol type. The default value is product-specific.rw
Enumeration
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.29
opticsIEth2ETSFlowClassifierSourceL4PortNumberIt indicates the 16 bits source L4 port number. The default value is 65537 (don't care).rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.30
opticsIEth2ETSFlowClassifierMaxSourceL4PortNumberThis object is used to define the MAX value of source L4 Port number range for this ETS ingress flow and must be greater than opticsIEth2ETSFlowClassifierSourceTCPPortNumber. If a range is not used the value must be set to 0. The default value is 0.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.31
opticsIEth2ETSFlowClassifierDestL4PortNumberIt indicates the 16 bits destination L4 port number. The default value is 65537 (don't care).rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.32
opticsIEth2ETSFlowClassifierMaxDestL4PortNumberThis object is used to define the MAX value of destination L4 Port number range for this ETS ingress flow and must be greater than opticsIEth2ETSFlowClassifierDestTCPPortNumber. If a range is not used the value must be set to 0. The default value is 0.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.33
opticsIEth2ETSFlowClassifierSourceIPV6AddrIt indicates the 128 bits source IP address. The specified source IP of the packet The packet's source IP address is AND-ed with the value of FlowClassifierSourceIPV6AddrBitmask and then compared against the value of this object.rw
OCTET STRING
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.34
opticsIEth2ETSFlowClassifierSourceIPV6AddrBitmaskThe specified source IPv6 address mask. If it is not configured, the default value is all 0.rw
OCTET STRING
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.35
opticsIEth2ETSFlowClassifierDestIPV6AddrIt indicates the 138 bits destination IPv6 address. The specified destination mac of the packet The packet's destination IPv4 address is AND-ed with the value of FlowClassifierDestIPV6AddrBitmask and then compared against the value of this object.rw
OCTET STRING
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.36
opticsIEth2ETSFlowClassifierDestIPV6AddrBitmaskThe specified destination IPv6 address mask. If it is not configured, the default value is all 0.rw
OCTET STRING
.1.3.6.1.4.1.637.54.1.25.3.1.10.1.37
opticsIMETSInFlowServiceIDTableThis table is a read-only version of the opticsIMETSInFlowTable. It is ordered by ServiceID and InFlow. An entry is created, in this table, automatically by the agent, when an entry is activated by the manager in the opticsIMETSInFlowTable with opticsIMETSInFlowRowStatus equal to 'active'. An entry is deleted, in this table, automatically by the agent, when an entry is deactivated or deleted by the manager in the opticsIMETSInFlowTable with opticsIMETSInFlowRowStatus equal to 'destroy' or 'notInService'.
SEQUENCE OF OpticsIMETSInFlowServiceIDEntry
.1.3.6.1.4.1.637.54.1.25.3.1.11
opticsIMETSInFlowServiceIDEntryAn entry of opticsIMETSInFlowServiceIDTable.
OpticsIMETSInFlowServiceIDEntry
.1.3.6.1.4.1.637.54.1.25.3.1.11.1
opticsIMETSInFlowServiceIDServiceTypeIndexThe value of this object is equal to opticsIMETSInFlowServiceType in the opticsIMETSInFlowTable.
OpticsIMETSInFlowServiceType
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.1
opticsIMETSInFlowServiceIDServiceIDIndexThe value of this object is equal to opticsIMETSInFlowServiceID value of opticsIMETSInFlowTable.
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.2
opticsIMETSInFlowServiceIDInFlowIndexThe value of this object is equal to opticsIMETSInFlowIndex value of opticsIMETSInFlowTable.
OpticsIMETSFlowIndex
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.3
opticsIMETSInFlowServiceIDUserLabelThis object is the read-only version of the opticsIMETSInFlowUserLabel in the opticsIMETSInFlowTable.ro
OpticsIMUserLabel (TSDIM-SNMP-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.4
opticsIMETSInFlowServiceIDTrafficDescrThis object is the read-only version of the opticsIMETSInFlowTrafficDescr in the opticsIMETSInFlowTable.ro
OpticsIMETSTrafficDescrIndex
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.5
opticsIMETSInFlowServiceIDFlowTypeThis object is the read-only version of the opticsIMETSInFlowType in the opticsIMETSInFlowTable.ro
OpticsIMETSFlowType
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.6
opticsIMETSInFlowServiceIDPolicingModeThis object is the read-only version of the opticsIMETSInFlowPolicingMode in the opticsIMETSInFlowTable.ro
OpticsIMETSPolicingMode
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.7
opticsIMETSInFlowServiceIDCrossConnectIdentifierThis object is the read-only version of the opticsIMETSInFlowCrossConnectIdentifier in the opticsIMETSInFlowTable.ro
Integer32
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.8
opticsIMETSInFlowServiceIDVlanPopThis object is the read-only version of the opticsIMETSInFlowVlanPop in the opticsIMETSInFlowTable.ro
OpticsIMVlanConfiguration
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.9
opticsIMETSInFlowServiceIDColorProfilePointerThis object is the read-only version of the opticsIMETSInFlowColorProfilePointer in the opticsIMETSInFlowTable.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.10
opticsIMETSInFlowServiceIDLayer2ProtocolListThis object is the read-only version of the opticsIMETSInFlowLayer2ProtocolList in the opticsIMETSInFlowTable.ro
OpticsIMLayer2ProtocolList
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.11
opticsIMETSInFlowServiceIDL2ActualProtocolListThis object is the read-only version of the opticsIMETSInFlowL2ProtocolList in the opticsIMETSInFlowTable.ro
OpticsIMLayer2ProtocolList
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.12
opticsIMETSInFlowServiceIDGroupIDThis object is the read-only version of the opticsIMETSInFlowGroupID in the opticsIMETSInFlowTable.ro
Integer32
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.13
opticsIMETSInFlowServiceIDClassificationModeThis object is read-only version of the opticsIMETSInFlowClassificationMode in the opticsIMETSInFlowTablero
OpticsIMETSclassMode
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.14
opticsIMETSInFlowServiceIDUseDEIThis object is the read-only version of the opticsIMETSInFlowUseDEI in the opticsIMETSInFlowTable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.15
opticsIMETSInFlowServiceIDControlWordThis object is the read-only version of the opticsIMETSInFlowControlWord in the opticsIMETSInFlowTable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.11.1.16
opticsIMETSOutFlowServerIDTableThis table is a read-only version of the opticsIMETSOutFlowTable. It is ordered by ServerID and OutFlow. An entry is created, in this table, automatically by the agent, when an entry is activated by the manager in the opticsIMETSOutFlowTable with opticsIMETSOutFlowRowStatus equal to 'active'. An entry is deleted, in this table, automatically by the agent, when an entry is deactivated or deleted by the manager in the opticsIMETSOutFlowTable with opticsIMETSInFlowRowStatus equal to 'destroy' or 'notInService'.
SEQUENCE OF OpticsIMETSOutFlowServerIDEntry
.1.3.6.1.4.1.637.54.1.25.3.1.12
opticsIMETSOutFlowServerIDEntryAn entry of opticsIMETSOutFlowServerIDTable.
OpticsIMETSOutFlowServerIDEntry
.1.3.6.1.4.1.637.54.1.25.3.1.12.1
opticsIMETSOutFlowServerIDServerTypeIndexThe value of this object is equal to opticsIMETSOutFlowServerType in the opticsIMETSOutFlowTable.
OpticsIMETSOutFlowServerType
.1.3.6.1.4.1.637.54.1.25.3.1.12.1.1
opticsIMETSOutFlowServerIDServerIDIndexThe value of this object is equal to opticsIMETSOutFlowServiceID value of opticsIMETSOutFlowTable.
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.12.1.2
opticsIMETSOutFlowServerIDOutFlowIndexThe value of this object is equal to opticsIMETSOutFlowIndex value of opticsIMETSOutFlowTable.
OpticsIMETSFlowIndex
.1.3.6.1.4.1.637.54.1.25.3.1.12.1.3
opticsIMETSOutFlowServerIDUserLabelThis object is the read-only version of the opticsIMETSOutFlowUserLabel in the opticsIMETSOutFlowTable.ro
OpticsIMUserLabel (TSDIM-SNMP-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.12.1.4
opticsIMETSOutFlowServerIDCrossConnectIdentifierThis object is the read-only version of the opticsIMETSOutFlowCrossConnectIdentifier in the opticsIMETSOutFlowTable.ro
Integer32
.1.3.6.1.4.1.637.54.1.25.3.1.12.1.5
opticsIMETSOutFlowServerIDVlanStackPointerThis object is the read-only version of the opticsIMETSOutFlowVlanStackPointer in the opticsIMETSOutFlowTable.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.12.1.6
opticsIMETSOutFlowServerIDControlWordThis object is the read-only version of the opticsIMETSOutFlowCrossControlWord in the opticsIMETSOutFlowTable.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.12.1.7
opticsIMETSOutFlowServerIDAtmVpiOutThis object, applicable to ATM Flow, is the read-only version of the opticsIMETSOutFlowAtmVpiOut in the opticsIMETSOutFlowAtmTable AUGMENT of opticsIMETSOutFlowTable.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.12.1.8
opticsIMETSOutFlowServerIDAtmVciOutThis object, applicable to ATM Flow, is the read-only version of the opticsIMETSOutFlowAtmVciOut in the opticsIMETSOutFlowAtmTable AUGMENT of opticsIMETSOutFlowTable.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.12.1.9
opticsIMETSOutFlowServerIDAtmConcGroupNumberThis object, applicable to ATM Flow, is the read-only version of the opticsIMETSOutFlowAtmConcGroupNumber in the opticsIMETSOutFlowAtmTable AUGMENT of opticsIMETSOutFlowTable.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.12.1.10
opticsIMETSVlanStackConfIndexNextThis object contains an appropriate value to be used for opticsIMETSVlanStackConfIndex when creating entries in the opticsIMETSVlanStackConfTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSVlanStackConfIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to replect the next unassigned index.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.13
opticsIMETSVlanStackConfTableThe opticsIMETSVlanStackConfOutFlowIndex and the opticsIMETSVlanStackConfVlanIndex are used as indexes. The manager creates an entry in this table for each OutFlow with VLAN Push operation enabled. One or more entries are created in this table by the manager for each OutFlow in opticsIMETSOutFlowTable.
SEQUENCE OF OpticsIMETSVlanStackConfEntry
.1.3.6.1.4.1.637.54.1.25.3.1.14
opticsIMETSVlanStackConfEntryAn entry of the opticsIMETSVlanStackConfTable.
OpticsIMETSVlanStackConfEntry
.1.3.6.1.4.1.637.54.1.25.3.1.14.1
opticsIMETSVlanStackConfIndexA unique value to identify the VLAN Stack Configuration. When creating a new row in the table, the value of this index may be obtained by retrieving the value of opticsIMETSVlanStackConfIndexNext. The range is 1..MAXVlanStackConf, where MAXVlanStackConf is product dependent and it will be specified in the product specification document.
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.14.1.1
opticsIMETSVlanStackConfVlanIndexA value to identify the VLAN number. The range is 1..3.
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.14.1.2
opticsIMETSVlanStackConfVlanIDThis object defines the VLAN value to be set for VLAN tag to be pushed. The range is 0..4095. The default value is 0.rw
OpticsIMETSVlanCfg
.1.3.6.1.4.1.637.54.1.25.3.1.14.1.3
opticsIMETSVlanStackConfPriorityModeThis object represents the way by which priority bits of VLAN tag have to be managed, by opticsIMETSVlanStackConfPriority and opticsIMETSVlanStackConfPriorityYellow. The default value is 'colorBlind'.rw
OpticsIMPriorityMode
.1.3.6.1.4.1.637.54.1.25.3.1.14.1.4
opticsIMETSVlanStackConfPriorityThis object defines value of the priority bits to be set in VLAN tag to be pushed. In the 'colorBlind' mode, it is the value to be set for all outgoing frames in the flow. In the 'colorAware' mode, it is the value to be set only for green frames. The range is 'pri000(0)'..'pri111(7)'. The default value is 0.rw
OpticsmIMETSPriority
.1.3.6.1.4.1.637.54.1.25.3.1.14.1.5
opticsIMETSVlanStackConfPriorityYellowThis object defines value of the priority bits to be set in VLAN tag to be pushed. It is the value to be set for yellow frames in the flow. The value of this object is meaningful only if the mode is 'colorAware'. The range is 'pri000(0)'..'pri111(7)'. The default value is 0.rw
OpticsmIMETSPriority
.1.3.6.1.4.1.637.54.1.25.3.1.14.1.6
opticsIMETSVlanStackConfRowStatusEnable creating, deleting and modifying this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.14.1.7
opticsIMETSVlanStackConfUseDEIThis object contains information about DEI Use (Default value: false) on outgoing S-Tagged frames. It is the value to be set for yellow frames in the flow. The value of this object is meaningful only if the mode is 'colorAware'.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.14.1.8
opticsIMETSColorProfileIndexNextThis object contains an appropriate value to be used for opticsIMETSColorProfileIndex when creating entries in the opticsIMETSColorProfileTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSColorProfileIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to replect the next unassigned index.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.15
opticsIMETSColorProfileTableThis table contains information about ETS Color Profiles either referred to Priority bits or to IP-Dscp bits.
SEQUENCE OF OpticsIMETSColorProfileEntry
.1.3.6.1.4.1.637.54.1.25.3.1.16
opticsIMETSColorProfileEntryAn entry of the opticsIMETSColorProfileTable.
OpticsIMETSColorProfileEntry
.1.3.6.1.4.1.637.54.1.25.3.1.16.1
opticsIMETSColorProfileIndexA unique value to identify the color profile. When creating a new row in the table, the value of this index may be obtained by retrieving the value of opticsIMETSColorProfileIndexNext. The range is 1..MAXColorProfile, where MAXColorProfile is product dependent and it will be specified in the product specification document.
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.1
opticsIMETSColorProfilePriority0Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 0. The default value is 'green'.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.2
opticsIMETSColorProfilePriority1Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 1. The default value is 'green'.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.3
opticsIMETSColorProfilePriority2Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 2. The default value is 'green'.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.4
opticsIMETSColorProfilePriority3Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 3. The default value is 'green'.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.5
opticsIMETSColorProfilePriority4Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 4. The default value is 'green'.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.6
opticsIMETSColorProfilePriority5Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 5. The default value is 'green'.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.7
opticsIMETSColorProfilePriority6Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 6. The default value is 'green'.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.8
opticsIMETSColorProfilePriority7Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 7. The default value is 'green'.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.9
opticsIMETSColorProfileUserLabelThe canonical user label assigned to the Color Profile.rw
OpticsIMUserLabel (TSDIM-SNMP-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.10
opticsIMETSColorProfileRowStatusFor creating, modifying, and deleting this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.11
opticsIMETSColorProfileModeThis object is used to select the type of color profile set on incoming frames: either by priority bits or by Ip Dscp bits. The default value is priority(0).rw
OpticsIMETSclassMode
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.12
opticsIMETSColorProfileDscp0Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000000. The default value is yellow.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.13
opticsIMETSColorProfileDscp1Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000001. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.14
opticsIMETSColorProfileDscp2Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000010. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.15
opticsIMETSColorProfileDscp3Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000011. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.16
opticsIMETSColorProfileDscp4Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000100. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.17
opticsIMETSColorProfileDscp5Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000101. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.18
opticsIMETSColorProfileDscp6Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000110. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.19
opticsIMETSColorProfileDscp7Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000111. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.20
opticsIMETSColorProfileDscp8Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001000. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.21
opticsIMETSColorProfileDscp9Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001001. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.22
opticsIMETSColorProfileDscp10Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001010. The default value is red.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.23
opticsIMETSColorProfileDscp11Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001011. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.24
opticsIMETSColorProfileDscp12Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001100. The default value is yellow.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.25
opticsIMETSColorProfileDscp13Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001101. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.26
opticsIMETSColorProfileDscp14Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001110. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.27
opticsIMETSColorProfileDscp15Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001111. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.28
opticsIMETSColorProfileDscp16Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010000. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.29
opticsIMETSColorProfileDscp17Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010001. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.30
opticsIMETSColorProfileDscp18Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010010. The default value is red.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.31
opticsIMETSColorProfileDscp19Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010011. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.32
opticsIMETSColorProfileDscp20Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010100. The default value is yellow.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.33
opticsIMETSColorProfileDscp21Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010101. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.34
opticsIMETSColorProfileDscp22Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010110. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.35
opticsIMETSColorProfileDscp23Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010111. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.36
opticsIMETSColorProfileDscp24Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011000. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.37
opticsIMETSColorProfileDscp25Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011001. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.38
opticsIMETSColorProfileDscp26Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011010. The default value is red.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.39
opticsIMETSColorProfileDscp27Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011011. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.40
opticsIMETSColorProfileDscp28Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011100. The default value is yellow.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.41
opticsIMETSColorProfileDscp29Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011101. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.42
opticsIMETSColorProfileDscp30Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011110. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.43
opticsIMETSColorProfileDscp31Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011111. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.44
opticsIMETSColorProfileDscp32Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100000. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.45
opticsIMETSColorProfileDscp33Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100001. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.46
opticsIMETSColorProfileDscp34Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100010. The default value is red.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.47
opticsIMETSColorProfileDscp35Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100011. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.48
opticsIMETSColorProfileDscp36Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100100. The default value is yellow.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.49
opticsIMETSColorProfileDscp37Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100101. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.50
opticsIMETSColorProfileDscp38Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100110. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.51
opticsIMETSColorProfileDscp39Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100111. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.52
opticsIMETSColorProfileDscp40Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101000. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.53
opticsIMETSColorProfileDscp41Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101001. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.54
opticsIMETSColorProfileDscp42Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101010. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.55
opticsIMETSColorProfileDscp43Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101011. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.56
opticsIMETSColorProfileDscp44Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101100. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.57
opticsIMETSColorProfileDscp45Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101101 The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.58
opticsIMETSColorProfileDscp46Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101110. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.59
opticsIMETSColorProfileDscp47Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101111. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.60
opticsIMETSColorProfileDscp48Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110000. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.61
opticsIMETSColorProfileDscp49Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110001. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.62
opticsIMETSColorProfileDscp50Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110010. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.63
opticsIMETSColorProfileDscp51Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110101. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.64
opticsIMETSColorProfileDscp52Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110100. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.65
opticsIMETSColorProfileDscp53Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110101. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.66
opticsIMETSColorProfileDscp54Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110110. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.67
opticsIMETSColorProfileDscp55Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110111. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.68
opticsIMETSColorProfileDscp56Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111000. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.69
opticsIMETSColorProfileDscp57Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111001. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.70
opticsIMETSColorProfileDscp58Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111010. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.71
opticsIMETSColorProfileDscp59Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111011. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.72
opticsIMETSColorProfileDscp60Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111100. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.73
opticsIMETSColorProfileDscp61Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111101. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.74
opticsIMETSColorProfileDscp62Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111110. The default value is green.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.75
opticsIMETSColorProfileDscp63Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111111. The default value is 'green'.rw
OpticsIMColorType
.1.3.6.1.4.1.637.54.1.25.3.1.16.1.76
opticsIMETSFlowGroupIndexNextThis object contains an appropriate value to be used for opticsIMETSFlowGroupIndex when creating entries in the opticsIMETSFlowGroupTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSFlowGroupIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.17
opticsIMETSFlowGroupTableThis table contains information about ETS Flow Group configuration.
SEQUENCE OF OpticsIMETSFlowGroupEntry
.1.3.6.1.4.1.637.54.1.25.3.1.18
opticsIMETSFlowGroupEntryAn entry of the opticsIMETSFlowGroupTable. The ifIndex represents the Ethernet interface with client type='ets' associated with all the flows belonging to the group (i.e. all the flows belonging to this group must have the opticsIMETSInFlowServiceID equal to ifIndex). In any case the opticsIMETSFlowGroupIndex should be a globally unique index.
OpticsIMETSFlowGroupEntry
.1.3.6.1.4.1.637.54.1.25.3.1.18.1
opticsIMETSFlowGroupIndexA unique value to identify the ETS Flow Group. When creating a new row in the table, the value of this index may be obtained by retrieving the value of opticsIMETSFlowGroupIndex. The range is 1..MAXFlowGroup, where MAXFlowGroup is product dependent and it will be specified in the product specification document.
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.18.1.1
opticsIMETSFlowGroupPolicingModeIt defines the Policing Mode. By default, policing is 'colorBlind'.rw
OpticsIMETSPolicingMode
.1.3.6.1.4.1.637.54.1.25.3.1.18.1.2
opticsIMETSFlowGroupTrafficDescrIndexIt identifies the row in the opticsIMETSTrafficDescrTable which applies to the ETS flow group, both in input and output direction.rw
OpticsIMETSTrafficDescrIndex
.1.3.6.1.4.1.637.54.1.25.3.1.18.1.3
opticsIMETSFlowGroupUserLabelThe canonical user label assigned to the flow group.rw
OpticsIMUserLabel (TSDIM-SNMP-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.18.1.4
opticsIMETSFlowGroupRowStatusFor creating, modifying, and deleting this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.18.1.5
opticsIMETSFlowGroupColorProfilePointerThis object points to a row in the opticsIMColorProfileTable. It defines the Color Profile associated with priority bits in the 'colorAware' mode. A value of 0 indicates that no Color Profile has been associated with this Flow Group and then the 'colorBlind' mode is used. The default value is 0.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.18.1.6
opticsIMETSCrossConnectServiceTypeTableThis table is read-only version of ETS Cross Connect table. It is organized by service Type and it contains useful data for the manager
SEQUENCE OF OpticsIMETSCrossConnectServiceTypeEntry
.1.3.6.1.4.1.637.54.1.25.3.1.19
opticsIMETSCrossConnectServiceTypeEntryAn entry of the opticsIMETSCrossConnectServiceTypeTable.
OpticsIMETSCrossConnectServiceTypeEntry
.1.3.6.1.4.1.637.54.1.25.3.1.19.1
opticsIMETSCrossConnectServiceTypeIndexThe value of this object is equal to the Flow Service Type: value specified opticsIMETSInFlowServiceType of the opticsIMETSInFlowTable or opticsIMETSOutFlowServiceType of opticsIMETSOutFlowTable. The rule is the following one: if one of two Flow legs has the value of service type different from Ethernet, this value is assigned to opticsIMETSCrossConnectServiceTypeIndex. In case of atm service or pw on atm, atm service type is identified. In case of circuit emulation (ces, ces on provider bridge, ces on pw), the service type value (ces-pw or ces-pb) is identified
OpticsIMETSFlowServiceType
.1.3.6.1.4.1.637.54.1.25.3.1.19.1.1
opticsIMETSCrossConnectServiceTypeInFlowUserLabelThe canonical user label assigned to the Inflow. This attribute value is equal to opticsIMETSInFlowUserLabel of opticsIMETSInFlowTablero
OpticsIMUserLabel (TSDIM-SNMP-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.19.1.2
opticsIMETSCrossConnectServiceTypeInFlowServiceIDThis object contains an appropriate value service type dependent. This attribute value is equal to opticsIMETSInFlowServiceID of opticsIMETSInFlowTablero
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.19.1.3
opticsIMETSCrossConnectServiceTypeOutFlowUserLabelThe canonical user label assigned to the Outflow. This attribute value is equal to opticsIMETSOutFlowUserLabel of opticsIMETSOutFlowTablero
OpticsIMUserLabel (TSDIM-SNMP-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.19.1.4
opticsIMETSCrossConnectServiceTypeOutFlowServerIDThis object contains an appropriate value service type dependent. This attribute value is equal to opticsIMETSOutFlowServerID of opticsIMETSOutFlowTablero
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.19.1.5
opticsIMATMCellConcGroupIndexNextThis object contains an appropriate value to be used for opticsIMATMCellConcGroupIndex when creating entries in the opticsIMATMCellConcGroupTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMATMCellConcGroupIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to reflect the next unassigned index.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.20
opticsIMATMCellConcGroupTableThis table contains configurations for the CellConcGroup
SEQUENCE OF OpticsIMATMCellConcGroupEntry
.1.3.6.1.4.1.637.54.1.25.3.1.21
opticsIMATMCellConcGroupEntryAn entry of the opticsIMATMCellConcGroupTable.
OpticsIMATMCellConcGroupEntry
.1.3.6.1.4.1.637.54.1.25.3.1.21.1
opticsIMATMCellConcGroupIndexA unique value to identify the CONC_GROUP. The range is 1..65535.
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.21.1.1
opticsIMATMCellConcGroupMaxConcCellsMax number of Concatenated Cells in a CONC_GROUP The range is 1..32. The default value is 16.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.21.1.2
opticsIMATMCellConcGroupTimeOutTimeout for the generation of a MPLS packet containing concatenated ATM cells. The range is 1..100. The default value is 50.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.21.1.3
opticsIMATMCellConcGroupCLPTriggerThis object indicate if the CLP (Cell Loss Priority) bit changing in the ATM cells is used (true) or not (false) as trigger for the generation of the MPLS packet containing concatenated ATM cells. The default value is false?rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.21.1.4
opticsIMATMCellConcGroupCoSCoS of all the ATM Flow in the CONC_GROUP.ro
OpticsIMETSTrafficDescrType
.1.3.6.1.4.1.637.54.1.25.3.1.21.1.5
opticsIMATMCellConcGroupRowStatusFor creating, modifying, and deleting this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.21.1.6
opticsIMATM2ETSFlowClassifierIndexNextThis object contains an appropriate value to be used for opticsIMATM2ETSFlowClassifierIndex when creating entries in the opticsIMATM2ETSFlowClassifierTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMATM2ETSFlowClassifierIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to replect the next unassigned index.ro
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.22
opticsIMATM2ETSFlowClassifierTableThis table provides ATM configuration for each ATM ingress flow. This table is indexed by the same index that was created for the associated entry of the opticsIMETSInFlowTable. The opticsIMETSInFlowIndex and the opticsIMATM2ETSFlowClassifierIndex are used as indexes. One or more entries are created in this table by the manager only if there is an antry in the opticsIMETSInFlowTable with an opticsIMETSInFlowServiceType equal to 'ATM' or PW-ATM?
SEQUENCE OF OpticsIMATM2ETSFlowClassifierEntry
.1.3.6.1.4.1.637.54.1.25.3.1.23
opticsIMATM2ETSFlowClassifierEntryAn entry of the opticsIMATM2ETSFlowClassifierTable.
OpticsIMATM2ETSFlowClassifierEntry
.1.3.6.1.4.1.637.54.1.25.3.1.23.1
opticsIMATM2ETSFlowClassifierInFlowIndexThe value of this object is equal to opticsIMETSInFlowIndex value of opticsIMETSInFlowTable.
OpticsIMETSFlowIndex
.1.3.6.1.4.1.637.54.1.25.3.1.23.1.1
opticsIMATM2ETSFlowClassifierIndexA unique value to identify this Flow Classifier. The range is 1..MAXFlowClassifier, where MAXFlowClassifier is product dependent and it will be specified in the product specification document.
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.23.1.2
opticsIMATM2ETSFlowClassifierVpiThis object defines ATM VPI on the ETS flow. The default value is 4096.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.23.1.3
opticsIMATM2ETSFlowClassifierMaxVpiThis object is used to define the MAX value of ATM VPI range for this ETS ingress flow and must be greater than opticsIMATM2ETSFlowClassifierVpi. If a range is not used the value must be set to 0. The default value is 0.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.23.1.4
opticsIMATM2ETSFlowClassifierVciThis object defines ATM VCI on the ETS flow. The default value is 65536.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.23.1.5
opticsIMATM2ETSFlowClassifierMaxVciThis object is used to define the MAX value of ATM VCI range for this ETS ingress flow and must be greater than opticsIMATM2ETSFlowClassifierVci. If a range is not used the value must be set to 0. The default value is 0.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.23.1.6
opticsIMATM2ETSFlowClassifierRowStatusEnable creating, deleting and modifying this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.637.54.1.25.3.1.23.1.7
opticsIMETSOutFlowAtmTableThis table contains information about ATM ETS egress flow.
SEQUENCE OF OpticsIMETSOutFlowAtmEntry
.1.3.6.1.4.1.637.54.1.25.3.1.24
opticsIMETSOutFlowAtmEntryAn entry of the opticsIMETSOutFlowAtmTable.
OpticsIMETSOutFlowAtmEntry
.1.3.6.1.4.1.637.54.1.25.3.1.24.1
opticsIMETSOutFlowAtmVpiOutThis object is used to define the Vpi in output (to be included in the PW-ATM or at egress in the ATM port). If the value is 4096 (out of range) the value of the Vpi is not changed. The default value is 4096.rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.24.1.1
opticsIMETSOutFlowAtmVciOutThis object is used to define the Vci in output (to be included in the PW-ATM or at egress in the ATM port). If the value is 65536 (out of range) the value of the Vci is not changed. The default value is 65536rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.24.1.2
opticsIMETSOutFlowAtmConcGroupNumberThis object is used to define the number of the CONC-GROUP the OutFlow belongs to. If 0 the Outflow is not concatenated. The default value is 0rw
Unsigned32
.1.3.6.1.4.1.637.54.1.25.3.1.24.1.3
opticsimETSMCConf
OBJECT IDENTIFIER
.1.3.6.1.4.1.637.54.1.25.99.3
opticsimETSMCCompl
OBJECT IDENTIFIER
.1.3.6.1.4.1.637.54.1.25.99.3.1
opticsimETSMCGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.637.54.1.25.99.3.2
opticsIMETSTrafficDescrGroupCollection of objects of opticsIMETSTrafficDescrTable.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.1
opticsIMETSInFlowGroupCollection of objects of opticsIMETSInFlowTable.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.2
opticsIMETSOutFlowGroupCollection of objects of opticsIMETSOutFlowTable.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.3
opticsIMETSCrossConnectGroupCollection of objects of opticsIMETSCrossCopnnectTable.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.4
opticsIMEth2ETSFlowClassifierGroupCollection of objects of opticsIMEth2ETSFlowClassifierTable.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.5
opticsIMETSInFlowServiceIDGroupCollection of objects of opticsIMETSInFlowServiceIDTable.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.6
opticsIMETSOutFlowServerIDGroupCollection of objects of opticsIMETSOutFlowServiceIDTable.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.7
opticsIMETSVlanStackConfGroupCollection of objects of opticsIMETSVlanStackConfTable.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.8
opticsIMETSColorProfileGroupCollection of objects of opticsIMETSColorProfileTable.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.9
opticsIMETSGroupFlowGroupCollection of objects of opticsIMETSFlowGroup.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.10
opticsIMETSCrossConnectServiceTypeGroupCollection of objects of opticsIMETSCrossConnectServiceTypeTable.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.11
opticsIMATMCellConcGroupGroupCollection of objects of opticsIMATMCellConcGroupTable.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.12
opticsIMATM2ETSFlowClassifierGroupCollection of objects of opticsIMATM2ETSFlowClassifierTable.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.13
opticsIMETSOutFlowAtmGroupCollection of objects of the opticsIMETSOutFlowAtmTable.
Unknown
.1.3.6.1.4.1.637.54.1.25.99.3.2.14