OPLINK-BTI-OPS-MIB
AI MIB Summary
The OPLINK-BTI-OPS-MIB facilitates SNMP-based monitoring and management of Oplink BTI optical transport devices, specifically exposing metrics related to the Optical Protection Switching (OPS) state, protection group status, and signal integrity for version 2 of the OPSM software.
oplink device OPSM version 2 mib
Main OID:
deviceOPSMv2_MIB.1.3.6.1.4.1.19547.1.7
103
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
103 total| Object Name |
|---|
deviceOPSMv2_MIBoplink device OPSM version 2 mib MODULE-IDENTITY .1.3.6.1.4.1.19547.1.7 |
version2 OBJECT IDENTIFIER .1.3.6.1.4.1.19547.1.7.1 |
emuTablecontroller card parameters SEQUENCE OF EmuEntry .1.3.6.1.4.1.19547.1.7.1.1 |
emuEntryRow definition for emuTable EmuEntry .1.3.6.1.4.1.19547.1.7.1.1.1 |
emuMfgNameManufacturer name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.1.1.1 |
emuModuleTypeModule type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.1.1.2 |
emuPartNumPart Number. Can be any combination of alphanumerical characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.1.1.3 |
emuSerialNumSerial number. Can be any combination of alphanumerical characters.ro DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.4 |
emuMfgDateManufacturing date. The format is yyyy-mm-dd.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.1.1.5 |
emuCaliDateManufacturing date. The format is yyyy-mm-ddro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.1.1.6 |
emuFirmwareVerSoftware version. The format is X.Y.Zro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.1.1.7 |
emuHardwareVerHardware version. The format is X.Y.Zro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.1.1.8 |
emuVendorIDVendor ID. The ID number of vendor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.1.1.9 |
emuSysDateSystem date. The format is YYYY-MM-DDrw DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.10 |
emuSysTimeSystem time. The format is HH:MM:SSrw DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.11 |
emuIpAddrIP address. The format is aaa.bbb.ccc.dddrw DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.12 |
emuNetMaskNetmask. The format is aaa.bbb.ccc.dddrw DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.13 |
emuGatewayGateway. The format is aaa.bbb.ccc.dddrw DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.14 |
emuMacAddrMac address. The format is aa:bb:cc:dd:ee:ffro DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.15 |
emuUptimeUptime. System uptime (Unit: s)ro Integer32 .1.3.6.1.4.1.19547.1.7.1.1.1.16 |
emuBoardTempBoardTemp. Get temperature of EMU card(Unit: 0.1 degree celsius)ro HeTenthCentigrade .1.3.6.1.4.1.19547.1.7.1.1.1.17 |
emuHighTemperatureThresholdHighTempThreshold. Get/Set high temperature threshold value of EMU card(Unit: 0.1 degree celsuis), range:550~750rw HeTenthCentigrade .1.3.6.1.4.1.19547.1.7.1.1.1.18 |
emuLowTemperatureThresholdLowTempThreshold. Get/Set low temperature threshold value of EMU card(Unit: 0.1 degree celsius), range:-250~0rw HeTenthCentigrade .1.3.6.1.4.1.19547.1.7.1.1.1.19 |
emuGetModConfigGetModConfig. Get current OPSM module config. format: OPSM.PA600/OPSM.BAro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.1.1.20 |
emuDelModConfigDelModConfig. get: return a blank character set: Delete current OPSM module config. format: OPSM.PA600/OPSM.BArw DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.21 |
emuAddModConfigAddModConfig. get: return a blank character set: Add OPSM module config, format: OPSM.PA600/OPSM.BArw DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.22 |
emuSaveConfigSaveConfig. get: return a blank character set: parameter is null.rw DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.23 |
emuRestoreDefaultRestoreDefault. get: return a blank character set: parameter is null.rw DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.24 |
emuResetReset. get: return a blank character set: parameter is null.rw DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.25 |
emuFirmwareUpgradeStartFirmwareUpgradeStart. get: return a blank character set: The name of the upgrade iamge which must be upload to the /var/ftp directory before do this operation.rw DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.40 |
emuFirmwareUpgradeStatusFirmwareUpgradeStatus. The status and percent of upgrade format: [status], [percent] status:0--none upgrade, 1--in progress, 2--upgrade successful, others-upgrade error code percent:1-100ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.1.1.41 |
emuGetSNMPConfigGet all snmp users' information. format:[Version] [Trap on/off] [IP] [Port] [Community/Username] [Access/Level]... Version:v1|v2c|v3 Trap on/off:trap|notrap Access:Read|Write level:noauth|authNoPriv MD5/SHA|authPriv MD5/SHA DES/AESro OCTET STRING .1.3.6.1.4.1.19547.1.7.1.1.1.50 |
emuDelSNMPConfigDelete snmp user. get: return a blank character set: v1 or v2c format:[version] [IP] [Community] v3 format: [version] [username] Version:v1|v2c|v3 Community/Username:6-15 characters IP:xxx.xxx.xxx.xxxrw OCTET STRING .1.3.6.1.4.1.19547.1.7.1.1.1.51 |
emuAddSNMPConfigAdd snmp user. get: return a blank character set: v1 or v2c format:[Version] [Trap on/off] [IP] [Port] [Community] [Access] v3 format:[Version] [Trap on/off] [IP] [Port] [Username] [Access] [EngineID] [Level] [Auth protocol] [AuthKey] [Priv protocal] [PrivKey] Version:v1|v2c|v3 Trap on/off:trap|notrap IP:xxx.xxx.xxx.xxx Port:0-65535 Community/Username:6-15 characters Access:r|w (r:read;w:write) EngineID:0x(10-128) characters Level:AuthPriv|AuthNoPriv|noAuthNoPriv Auth protocol:MD5|SHA AuthKey:8-15 characters Priv protocal:DES|AES PrivKey:8-15 charactersrw OCTET STRING .1.3.6.1.4.1.19547.1.7.1.1.1.52 |
emuGetCurrentAlarmCurrent alarm. The current alarm of system.ro OCTET STRING .1.3.6.1.4.1.19547.1.7.1.1.1.60 |
emuGetHisAlarmHistory alarm. Full directory of history alarm file.ro DisplayString .1.3.6.1.4.1.19547.1.7.1.1.1.61 |
emuChassisIdchassis index Integer32 .1.3.6.1.4.1.19547.1.7.1.1.1.1001 |
emuSlotIdslot index Integer32 .1.3.6.1.4.1.19547.1.7.1.1.1.1002 |
emuItemIdport/channel index Integer32 .1.3.6.1.4.1.19547.1.7.1.1.1.1003 |
opsmTableOPSM parameters SEQUENCE OF OPSMEntry .1.3.6.1.4.1.19547.1.7.1.2 |
opsmEntryRow definition for opsmTable OPSMEntry .1.3.6.1.4.1.19547.1.7.1.2.1 |
opsmMfgNameManufacturer name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.2.1.1 |
opsmPartNumPart Number. Can be any combination of alphanumerical characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.2.1.2 |
opsmSerialNumSerial number. Can be any combination of alphanumerical characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.2.1.3 |
opsmMfgDateManufacturing date. The format is yyyy-mm-dd. yyyy-1st and 2nd bytes. mm-3rd byte, dd-4th bytero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.2.1.4 |
opsmCaliDateManufacturing date. The format is yyyy-mm-dd. yyyy-1st and 2nd bytes. mm-3rd byte, dd-4th bytero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.2.1.5 |
opsmHardwareVerHardware version. The format is X.Y.Zro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.2.1.6 |
opsmVendorIDVendor ID. The ID number of vendorro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.2.1.7 |
opsmModuleTypeModule type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.2.1.8 |
opsmFirmwareVerSoftware version. The format is X.Y.Zro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.2.1.9 |
opsmReset0: hard reset, 1: soft reset.rw Integer32 .1.3.6.1.4.1.19547.1.7.1.2.1.10 |
opsmProtectionModeThe mode of protection switch. 0: clear, 1: force to primary, 2: force to secondary.rw Integer32 .1.3.6.1.4.1.19547.1.7.1.2.1.20 |
opsmRevertiveSettingThe action when the opticial of primary channel is resumed. 0: Non-Revertive, 1: Revertive.rw Integer32 .1.3.6.1.4.1.19547.1.7.1.2.1.21 |
opsmDiffSwitchSettingEnable or disable the function of input power different detection. 0: Disable, 1: Enable.rw Integer32 .1.3.6.1.4.1.19547.1.7.1.2.1.22 |
opsmDiffAlarmThresholdGet/Set Input optical power different alarm threshold between primary and secondary, default:10,(Unit:0.1dBm),range: 0--100rw HeTenthdBm .1.3.6.1.4.1.19547.1.7.1.2.1.23 |
opsmDiffSwitchThresholdGet/Set Input optical power switching threshold between primary and secondary, default:20,(Unit:0.1dBm),range: 0--100rw HeTenthdBm .1.3.6.1.4.1.19547.1.7.1.2.1.24 |
opsmInherentDiffOffsetGet/Set Input Optical Power different Offset between primary and secondary,default:0,(Unit:0.1dBm),range: -300--300rw HeTenthdBm .1.3.6.1.4.1.19547.1.7.1.2.1.25 |
opsmWTRTimeUsed in conjunction with PortID to access WTR time: default:5,(Unit:1s),range: 1--720rw Integer32 .1.3.6.1.4.1.19547.1.7.1.2.1.26 |
opsmSwitchStatusThe status of protection switch. 0: IDLE, 1: WTR, 2: Auto, 3: SF_ALL, 4: N/A, 5: Forced.ro Integer32 .1.3.6.1.4.1.19547.1.7.1.2.1.27 |
opsmSwitchPositionThe position of switch. 0: Secondary 1: Primaryro Integer32 .1.3.6.1.4.1.19547.1.7.1.2.1.28 |
opsmInputLosAlarmThrPathPThe input los alarm threshold on primary path default: -250,(Unit:0.1dBm),range: -350--350rw HeTenthdBm .1.3.6.1.4.1.19547.1.7.1.2.1.40 |
opsmInputLosAlarmThrPathSThe input los alarm threshold on secondary path default: -250,(Unit:0.1dBm),range: -350--350rw HeTenthdBm .1.3.6.1.4.1.19547.1.7.1.2.1.41 |
opsmInputLosAlarmHysThe input los alarm hystersis on both path default: 10,(Unit:0.1dB),range: 10--30rw HeTenthdBm .1.3.6.1.4.1.19547.1.7.1.2.1.42 |
opsmInputPowerPathPThe input power on primary path. (Unit:0.1dBm)ro Integer32 .1.3.6.1.4.1.19547.1.7.1.2.1.43 |
opsmInputPowerPathSThe input power on secondary path. (Unit:0.1dBm)ro Integer32 .1.3.6.1.4.1.19547.1.7.1.2.1.44 |
opsmSwitchCountTimes the switch has changed its position.ro Integer32 .1.3.6.1.4.1.19547.1.7.1.2.1.45 |
opsmChassisIdchassis index Integer32 .1.3.6.1.4.1.19547.1.7.1.2.1.1001 |
opsmSlotIdslot index Integer32 .1.3.6.1.4.1.19547.1.7.1.2.1.1002 |
opsmItemIdport/channel index Integer32 .1.3.6.1.4.1.19547.1.7.1.2.1.1003 |
oplkV6Traps OBJECT IDENTIFIER .1.3.6.1.4.1.19547.1.7.1.1001 |
oplkemuNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.19547.1.7.1.1001.1 |
oplkemuNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.19547.1.7.1.1001.1.0 |
oplinkemuTemperatureAbnormalThis trap signifies that emu temperature is exceess or bellow normal temperature range. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.1.0.1 |
oplinkemuTemperatureResumeThis trap signifies that emu temperature abnormal alarm is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.1.0.2 |
oplinkemuFanRemoveThis trap signifies that emu fan card is removed. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.1.0.3 |
oplinkemuFanInsertThis trap signifies that emu fan remove alarm is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.1.0.4 |
oplinkemuPowerRemoveThis trap signifies that emu power card is removed. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.1.0.5 |
oplinkemuPowerInsertThis trap signifies that emu power remove alarm is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.1.0.6 |
oplinkemuVoltageAbnormalThis trap signifies that emu voltage is exceess or bellow normal voltage range. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.1.0.7 |
oplinkemuVoltageResumeThis trap signifies that emu voltage abnormal alarm is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.1.0.8 |
oplinkemuSubCardDeleteThis trap signifies that emu sub-card is delete. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.1.0.9 |
oplinkemuSubCardAddThis trap signifies that emu sub-card delete alarm is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.1.0.10 |
oplinkemuSubCardUnmatchThis trap signifies that emu sub-card is unmatch with the configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.1.0.11 |
oplinkemuSubCardMatchThis trap signifies that emu sub-card unmatch alarm is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.1.0.12 |
oplkopsmNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.19547.1.7.1.1001.2 |
oplkopsmNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.19547.1.7.1.1001.2.0 |
oplinkopsmInputLosRPI1This trap signifies that opsm input power los alarm on CH1 primary path is on. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.1 |
oplinkopsmInputLosResumeRPI1This trap signifies that opsm input power los alarm on CH1 primary path is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.2 |
oplinkopsmInputLosRSI1This trap signifies that opsm input power los alarm on CH1 secondary path is on. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.3 |
oplinkopsmInputLosResumeRSI1This trap signifies that opsm input power los alarm on CH1 secondary path is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.4 |
oplinkopsmInputLosRPI2This trap signifies that opsm input power los alarm on CH2 primary path is on. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.5 |
oplinkopsmInputLosResumeRPI2This trap signifies that opsm input power los alarm on CH2 primary path is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.6 |
oplinkopsmInputLosRSI2This trap signifies that opsm input power los alarm on CH2 secondary path is on. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.7 |
oplinkopsmInputLosResumeRSI2This trap signifies that opsm input power los alarm on CH2 secondary path is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.8 |
oplinkopsmPowerDiffChannel1This trap signifies that opsm input power different alarm on CH1 is on. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.9 |
oplinkopsmPowerDiffResumeChannel1This trap signifies that opsm input power different alarm on CH1 is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.10 |
oplinkopsmPowerDiffChannel2This trap signifies that opsm input power different alarm on CH2 is on. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.11 |
oplinkopsmPowerDiffResumeChannel2This trap signifies that opsm input power different alarm on CH2 is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.12 |
oplinkopsmSwitchFailChannel1This trap signifies that opsm switch fail alarm on CH1 is on. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.13 |
oplinkopsmSwitchSuccessChannel1This trap signifies that opsm switch fail alarm on CH1 is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.14 |
oplinkopsmSwitchFailChannel2This trap signifies that opsm switch fail alarm on CH2 is on. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.15 |
oplinkopsmSwitchSuccessChannel2This trap signifies that opsm switch fail alarm on CH2 is clear. NOTIFICATION-TYPE .1.3.6.1.4.1.19547.1.7.1.1001.2.0.16 |
oplinkTrapCodeThis object describes oplink trap. It contains information about chassis, slot, port, device type (card type) and specific error code. When get, return 0ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.19547.1.7.1.1002 |