ONEACCESS-UPS-MIB
ONEACCESS-UPS-MIB enables SNMP-based monitoring and management of OneAccess Uninterruptible Power Supply units, exposing critical operational metrics such as battery status, input/output voltage levels, load percentage, and remaining runtime.
Imported Objects
Objects
11 total| Object Name |
|---|
oacUpsMIBThe MIB module to describe Uninterruptible Power Supplies. MODULE-IDENTITY .1.3.6.1.4.1.13191.10.3.4.1225 |
oacUpsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.1225.1 |
oacUpsBattery OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.1225.1.1 |
oacUpsBatteryStatusThe indication of the capacity remaining in the UPS system's batteries. A value of batteryNormal indicates that the remaining run-time is greater than upsConfigLowBattTime. A value of batteryLow indicates that the remaining battery run-time is less than or equal to upsConfigLowBattTime. A value of batteryDepleted indicates that the UPS will be unable to sustain the present load when and if the utility power is lost (including the possibility that the utility power is currently absent and the UPS is unable to sustain the output).ro Enumeration .1.3.6.1.4.1.13191.10.3.4.1225.1.1.1 |
oacUpsAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.1225.1.2 |
oacUpsAlarmsPresentThe present number of active alarm conditions.ro Gauge32 .1.3.6.1.4.1.13191.10.3.4.1225.1.2.1 |
oacUpsAlarmDescrA reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.ro AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.1225.1.2.2 |
oacUpsAlarmTimeThe value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of upsAlarmTime shall equal 0.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.1225.1.2.3 |
oacUpsTraps OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.1225.2 |
oacUpsTrapAlarmEntryAddedThis trap is sent each time an alarm is inserted into to the alarm table. It is sent on the insertion of all alarms except for upsAlarmOnBattery and upsAlarmTestInProgress. NOTIFICATION-TYPE .1.3.6.1.4.1.13191.10.3.4.1225.2.0 |
oacUpsTrapAlarmEntryRemovedThis trap is sent each time an alarm is removed from the alarm table. It is sent on the removal of all alarms except for upsAlarmTestInProgress. NOTIFICATION-TYPE .1.3.6.1.4.1.13191.10.3.4.1225.2.1 |
More MIBs from OneAccess
Browse all OneAccessMIBs →The ONEACCESS-VOICE-MIB provides managed objects for monitoring and controlling voice service parameters, including call session states, codec configurations, and QoS metrics, on OneAccess network access devices.
The OA-QOS-MIB module facilitates the monitoring and management of Quality of Service (QoS) parameters, specifically tracking traffic classification policies, queue depths, and bandwidth allocation statistics on OA (Open Access) network infrastructure. It enables administrators to verify service level agreement (SLA) compliance by exposing real-time metrics on packet dropping rates, latency, and jitter across prioritized traffic flows.
The OneAccess-RoundTripTime-MIB provides vendor-specific SNMP objects for monitoring network latency and round-trip time metrics on OneAccess broadband aggregation and edge routers. This module enables the tracking of path delay performance to facilitate troubleshooting of service quality and network congestion issues.
ONEACCESS-GLOBAL-REG defines the hierarchical namespace structure for OneAccess product-specific and generic MIB modules, organizing device identification and registration data under the `oacRegistration` and `oacProductSpecific` branches to enable standardized SNMP management of OneAccess architecture devices.
The ONEACCESS-JITTER-MIB module enables monitoring of network jitter and latency metrics on OneAccess broadband aggregation and edge routers. It provides specific counters and gauges to track packet delay variation, facilitating performance analysis for real-time traffic services such as VoIP and video streaming.
The OA-ZBFW-STATUS-MIB provides SNMP access to real-time operational status indicators for OAC ZBFW (Zone-Based Firewall) appliances, specifically monitoring session states, interface link status, and firewall engine health metrics.