ONEACCESS-PING-MIB
The ONEACCESS-PING-MIB module enables monitoring and management of ICMP echo request/reply operations on OneAccess network devices, specifically tracking ping success rates, round-trip times, and interface reachability status.
Imported Objects
Objects
14 total| Object Name |
|---|
oacPingMIBModuleContact updated MODULE-IDENTITY .1.3.6.1.4.1.13191.1.100.6601 |
oacPingNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.3.0 |
oacPingObjects OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.3.1 |
oacPingResultsTableDefines the Ping Results Table for providing the capability of performing ping operations at a remote host. This table contains objects outside the scope of RFC2925. An entry is added to the oacPingResultsTable when an pingCtlEntry is started by successful transition of its pingCtlAdminStatus object to enabled(1). An entry is removed from the oaPingResultsTable when its corresponding pingCtlEntry is deleted. SEQUENCE OF OacPingResultsEntry .1.3.6.1.4.1.13191.10.3.4.3.1.3 |
oacPingResultsEntryDefines an entry in the oacPingResultsTable. The oacPingResultsTable has the same indexing as the pingCtlTable in order for a oaPingResultsEntry to correspond to the pingCtlEntry that caused it to be created. OacPingResultsEntry .1.3.6.1.4.1.13191.10.3.4.3.1.3.1 |
oacPingJitterSamplesReflects the number of jitter samples taken, it is usually one less than pingResultsProbeResponses. If 0, then the values of oacPingResultsMinJitter, oacPingResultsMaxJitter and oacPingResultsAverageJitter are not valid.ro Unsigned32 .1.3.6.1.4.1.13191.10.3.4.3.1.3.1.1 |
oacPingResultsMinJitterThe minimum ping jitter value measured.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.13191.10.3.4.3.1.3.1.2 |
oacPingResultsMaxJitterThe maximum ping jitter value measured.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.13191.10.3.4.3.1.3.1.3 |
oacPingResultsAverageJitterThe average ping jitter value measured.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.13191.10.3.4.3.1.3.1.4 |
oacPingConformance OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.3.2 |
oacPingCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.3.2.1 |
oacPingComplianceThe compliance statement for the ONEACCESS-PING-MIB. Unknown .1.3.6.1.4.1.13191.10.3.4.3.2.1.1 |
oacPingGroups OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.3.2.2 |
oacPingGroupThe group of objects that comprise the OneAccess extensions to the remote ping capability in RFC2925. Unknown .1.3.6.1.4.1.13191.10.3.4.3.2.2.1 |
More MIBs from OneAccess
Browse all OneAccessMIBs →The ONEACCESS-VOICE-MIB provides managed objects for monitoring and controlling voice service parameters, including call session states, codec configurations, and QoS metrics, on OneAccess network access devices.
The OA-QOS-MIB module facilitates the monitoring and management of Quality of Service (QoS) parameters, specifically tracking traffic classification policies, queue depths, and bandwidth allocation statistics on OA (Open Access) network infrastructure. It enables administrators to verify service level agreement (SLA) compliance by exposing real-time metrics on packet dropping rates, latency, and jitter across prioritized traffic flows.
The OneAccess-RoundTripTime-MIB provides vendor-specific SNMP objects for monitoring network latency and round-trip time metrics on OneAccess broadband aggregation and edge routers. This module enables the tracking of path delay performance to facilitate troubleshooting of service quality and network congestion issues.
ONEACCESS-GLOBAL-REG defines the hierarchical namespace structure for OneAccess product-specific and generic MIB modules, organizing device identification and registration data under the `oacRegistration` and `oacProductSpecific` branches to enable standardized SNMP management of OneAccess architecture devices.
The ONEACCESS-JITTER-MIB module enables monitoring of network jitter and latency metrics on OneAccess broadband aggregation and edge routers. It provides specific counters and gauges to track packet delay variation, facilitating performance analysis for real-time traffic services such as VoIP and video streaming.
The OA-ZBFW-STATUS-MIB provides SNMP access to real-time operational status indicators for OAC ZBFW (Zone-Based Firewall) appliances, specifically monitoring session states, interface link status, and firewall engine health metrics.