ONEACCESS-IP-SERVICES-MIB
The ONEACCESS-IP-SERVICES-MIB facilitates the monitoring and management of IP service parameters, including session states, QoS policies, and traffic statistics, on OneAccess broadband aggregation and edge routers. This module provides the necessary OID structures for tracking protocol-specific performance metrics and operational status within the OneAccess IP services software stack.
Imported Objects
Objects
40 total| Object Name |
|---|
oacIpServicesConfigMIBfixed compilation issues MODULE-IDENTITY .1.3.6.1.4.1.13191.1.100.683 |
oacIpServicesConfig OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.1.8 |
oacIpServicesConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.1.8.1 |
oacIpServicesDnsConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.1.8.1.1 |
oacIpDnsConfigDomainNameConfiguration of the Domain Name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.1.1 |
oacIpDnsConfigMainAddThe main domain server IP addressrw IpAddress .1.3.6.1.4.1.13191.10.3.1.8.1.1.2 |
oacIpDnsConfigSndAddThe secondary domain server IP addressrw IpAddress .1.3.6.1.4.1.13191.10.3.1.8.1.1.3 |
oacIpDnsConfigTimeoutThe duration (default is 150 seconds) to wait for the name server answerrw Enumeration .1.3.6.1.4.1.13191.10.3.1.8.1.1.4 |
oacIpServicesDHCPCConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.1.8.1.2 |
oacDhcpClientAutoRestartAtmDHCP Client specific behaviorrw Enumeration .1.3.6.1.4.1.13191.10.3.1.8.1.2.1 |
oacDhcpClientBroadcastFlagActivation or not of the broadcast flag in DHCP Offer/Ack message, so that the server is made aware if the DHCP packets are unicast or broadcastrw Enumeration .1.3.6.1.4.1.13191.10.3.1.8.1.2.2 |
oacDhcpVendorIdTo include the option 60 within the DISCOVER messages and to append a proprietary vendor-ID stringrw OCTET STRING .1.3.6.1.4.1.13191.10.3.1.8.1.2.3 |
oacIpDhcpClientInterfaceTableThis table contains the Additional DHCP Client configuration on interfaces. The ifIndex in the INDEX clause identifies the interface where these options are applied. SEQUENCE OF OacIpDhcpClientInterfaceEntry .1.3.6.1.4.1.13191.10.3.1.8.1.2.4 |
oacIpDhcpClientInterfaceEntryAn entry in this table defines the additional option(s) sent by the DHCP Client. OacIpDhcpClientInterfaceEntry .1.3.6.1.4.1.13191.10.3.1.8.1.2.4.1 |
oacIpDhcpClientInterfaceIfNameThe name of the interface where the Dhcp Client is associated. Same as ifDescr from IF-MIBro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.2.4.1.1 |
oacIpDhcpClientInterfaceIgnoreDefRouteDo not insert default route in routing tablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.2.4.1.2 |
oacIpDhcpClientInterfaceLeaseOptLessRemove lease option 51 parameterrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.2.4.1.3 |
oacIpDhcpClientInterfaceUserClassIdInsert option 77 user class, if void option 77 is not insertedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.2.4.1.4 |
oacIpDhcpClientInterfaceRowStatusThe row status for this rule.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.2.4.1.5 |
oacIpDhcpAddClientInterfaceTableThis table contains the DHCP Client configuration on interfaces. The ifIndex in the INDEX clause identifies the interface where the DHCP Client is activated. SEQUENCE OF OacIpDhcpAddClientInterfaceEntry .1.3.6.1.4.1.13191.10.3.1.8.1.2.5 |
oacIpDhcpAddClientInterfaceEntryAn entry in this table defines the interface where the DHCP Client is activated. OacIpDhcpAddClientInterfaceEntry .1.3.6.1.4.1.13191.10.3.1.8.1.2.5.1 |
oacIpDhcpAddClientInterfaceActivateActivate the DHCP Client on the interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.2.5.1.1 |
oacIpDhcpAddClientInterfaceIfNameThe name of the interface where the Dhcp Client is associated. Same as ifDescr from IF-MIBro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.2.5.1.2 |
oacIpDhcpAddClientInterfaceClientIdSet of the Client Identifier. The optional argument indicates which MAC address shall be used in the DHCP DISCOVER message. When the optional client-id argument is not present, the DHCP DISCOVER message uses the MAC address of the interface otherwise if present it uses the client-id string value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.2.5.1.3 |
oacIpDhcpAddClientInterfaceHostnameSet of the Hostname.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.2.5.1.4 |
oacIpDhcpAddClientInterfaceRowStatusThe row status for this rule.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.2.5.1.5 |
oacIpServicesArpProxyConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.1.8.1.3 |
oacIpProxyArpInterfaceConfigTableThis table contains the Proxy ARP configuration on interfaces. The ifIndex in the INDEX clause identifies the interface where Proxy ARP is applied SEQUENCE OF OacIpProxyArpInterfaceConfigEntry .1.3.6.1.4.1.13191.10.3.1.8.1.3.1 |
oacIpProxyArpInterfaceConfigEntryAn entry in this table defines the interface where the Proxy ARP is configured. OacIpProxyArpInterfaceConfigEntry .1.3.6.1.4.1.13191.10.3.1.8.1.3.1.1 |
oacIpProxyArpInterfaceConfigActivateActivate Proxy Arp.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.3.1.1.1 |
oacIpProxyArpInterfaceConfigIfNameThe name of the interface where Proxy Arp is activated. Same as ifDescr from IF-MIBro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.3.1.1.2 |
oacIpProxyArpInterfaceConfigRowStatusThe Row Status for this rule.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.3.1.1.3 |
oacIpServicesIcmpRedirConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.1.8.1.4 |
oacIpIcmpRedirConfigActivateEnable ICMP host redirects.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.1.8.1.4.1 |
oacIpIcmpRedirConfigRedirRoutesActivateEnable learning icmp redirect routes. It is possible to define the timeout (in seconds) of redirect routes See below the meaning of the different values : - Default timeout 180s - 0 Value to disable learning icmp redirect routes (default behaviour) - <1-4294967295> Timeout of redirect routes (seconds)rw INTEGER .1.3.6.1.4.1.13191.10.3.1.8.1.4.2 |
oacIpIcmpRedirConfigRateLimitUnreachrate limit icmp messages generated. See below the meaning of the different values : - Default value 500ms - 0 Default behaviour - <1-4294967295> Once per millisecondsrw INTEGER .1.3.6.1.4.1.13191.10.3.1.8.1.4.3 |
oacIpServicesConfigConformance OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.1.8.2 |
oacIpServicesGroups OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.1.8.2.1 |
oacIpServicesConfigGroupGroup of IP Servicesobjects Unknown .1.3.6.1.4.1.13191.10.3.1.8.2.1.1 |
oacIpServicesCompls OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.1.8.2.2 |
More MIBs from OneAccess
Browse all OneAccessMIBs →The ONEACCESS-VOICE-MIB provides managed objects for monitoring and controlling voice service parameters, including call session states, codec configurations, and QoS metrics, on OneAccess network access devices.
The OA-QOS-MIB module facilitates the monitoring and management of Quality of Service (QoS) parameters, specifically tracking traffic classification policies, queue depths, and bandwidth allocation statistics on OA (Open Access) network infrastructure. It enables administrators to verify service level agreement (SLA) compliance by exposing real-time metrics on packet dropping rates, latency, and jitter across prioritized traffic flows.
The OneAccess-RoundTripTime-MIB provides vendor-specific SNMP objects for monitoring network latency and round-trip time metrics on OneAccess broadband aggregation and edge routers. This module enables the tracking of path delay performance to facilitate troubleshooting of service quality and network congestion issues.
ONEACCESS-GLOBAL-REG defines the hierarchical namespace structure for OneAccess product-specific and generic MIB modules, organizing device identification and registration data under the `oacRegistration` and `oacProductSpecific` branches to enable standardized SNMP management of OneAccess architecture devices.
The ONEACCESS-JITTER-MIB module enables monitoring of network jitter and latency metrics on OneAccess broadband aggregation and edge routers. It provides specific counters and gauges to track packet delay variation, facilitating performance analysis for real-time traffic services such as VoIP and video streaming.
The OA-ZBFW-STATUS-MIB provides SNMP access to real-time operational status indicators for OAC ZBFW (Zone-Based Firewall) appliances, specifically monitoring session states, interface link status, and firewall engine health metrics.