ONEACCESS-AAA-MIB
AI MIB Summary
The ONEACCESS-AAA-MIB facilitates the monitoring and management of authentication, authorization, and accounting (AAA) parameters on OneAccess network devices, specifically tracking session states, user credentials, and policy enforcement events. This module ensures the integrity of octet string data structures used for AAA attribute exchange, enabling precise validation of user access logs and session limits.
Fixed the issues related to octet string range
Main OID:
oacAAAConfigMIB.1.3.6.1.4.1.13191.1.100.690
51
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
51 total| Object Name |
|---|
oacAAAConfigMIBFixed the issues related to octet string range MODULE-IDENTITY .1.3.6.1.4.1.13191.1.100.690 |
oacAAAConfig OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.10 |
oacAAAConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.10.1 |
oacAAARadiusServerConfigTableConfiguring Radius Server: For the device to authenticate with an radius server database, the following parameters have to be configured. The cli command for adding a radius server details is radius-server <RADIUS-server-ip> [<RADIUS-UDP-port>] <shared-key> [ <interface> <unit> ] The snmp table will contain the following attributes. 1) hostname or IP Address String 2) Radius Server Port Integer 1-65535 3) Shared Key String. 4) Retransmit Integer 1-100 default 3 5) Timeout Integer 1-600 default 3 6) Interface InterfaceIndex SEQUENCE OF OacAAARadiusServerConfigEntry .1.3.6.1.4.1.13191.10.3.4.10.1.1 |
oacAAARadiusServerConfigEntryThe Radius Server config entry will hold the details of one radius servers configured for the client to send the requests for authentication. This table is indexed on oacAAARadiusServrInfo which can be either an ipaddress or hostname of the Radius Server. OacAAARadiusServerConfigEntry .1.3.6.1.4.1.13191.10.3.4.10.1.1.1 |
oacAAARadiusServerInfoThe Info can be an : A.B.C.D IPv4 host address A.B.C.D Ipv4 subnet hostname Hostname.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.10.1.1.1.1 |
oacAAARadiusServerPortThe default server port to which radius client will connect to a radius server is 1812. But the user can always specify the port to which the client should connect when contacting the configured radius server.rw INTEGER .1.3.6.1.4.1.13191.10.3.4.10.1.1.1.2 |
oacAAARadiusServerSharedKeyPre shared key between the radius client and server.rw OCTET STRING .1.3.6.1.4.1.13191.10.3.4.10.1.1.1.3 |
oacAAARadiusServerRetriesThe Client can do the configured number of retries to this radius server before moving to the next radius server. The default number of retries is 3.rw INTEGER .1.3.6.1.4.1.13191.10.3.4.10.1.1.1.4 |
oacAAARadiusServerTimeoutThe nummber of seconds to wait before to call a timeout. The default value is 3 seconds.rw INTEGER .1.3.6.1.4.1.13191.10.3.4.10.1.1.1.5 |
oacAAARadiusServerInterfaceThe interface for this device to use to contact the radius server for auth requests. It is identified by the ifIndex. Each interface/unit is identified by an ifIndex.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.13191.10.3.4.10.1.1.1.6 |
oacAAARadiusServerRowStatusThe Row status for an entry in the oacAAARadiusServerConfigTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.10.1.1.1.7 |
oacAAARadiusConfigAccPortSet the port for Radius accouting. reset or deletion of this value is not possible the port value can only be modified.rw INTEGER .1.3.6.1.4.1.13191.10.3.4.10.1.2 |
oacAAATacacsServerConfigTableConfiguring Tacacs client: The cli to add tacacs server info for the tacacs client is tacacs-server <host> [<port>] <key> [ <interface> <unit> ] Hence the snmp table for to hold the tacacs server info has the following 1) hostname or IP Address OCTET STRING 2) TACACs serverport Integer 1-65535 3) Shared Key OCTET STRING 4) Timeout integer 1-600 default 3 5) Interface InterfaceIndex SEQUENCE OF OacAAATacacsServerConfigEntry .1.3.6.1.4.1.13191.10.3.4.10.1.3 |
oacAAATacacsServerConfigEntryAn entry holds the information per tacacs server configured. the entry is uniquely identified/indexed by the oacAAATacacsServerInfo which can be either the IPv4 address or an hostname. OacAAATacacsServerConfigEntry .1.3.6.1.4.1.13191.10.3.4.10.1.3.1 |
oacAAATacacsServerInfoThe Info can be an : A.B.C.D IPv4 host address A.B.C.D Ipv4 subnet hostname Hostname.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.10.1.3.1.1 |
oacAAATacacsServerPortThe default for an tacacs client to connect to tacacs server is 49. But this can vary depending on the server configuration. Hence when a tacacs server is added the port on which this server is running has to be specified.rw INTEGER .1.3.6.1.4.1.13191.10.3.4.10.1.3.1.2 |
oacAAATacacsServerSharedKeyThe shared key will be used to authenticate a tacacs client with the tacacs server. This has key is different from the user authentication keys.rw OCTET STRING .1.3.6.1.4.1.13191.10.3.4.10.1.3.1.3 |
oacAAATacacsServerTimeoutThe default timeout value for an client to wait for a response from the tacacs server is set to 3 seconds. but this can be modified by setting a value.rw INTEGER .1.3.6.1.4.1.13191.10.3.4.10.1.3.1.4 |
oacAAATacacsServerInterfaceThe interface which this tacacs client should use to contact the configured tacacs server. The interface is identified by the ifIndex.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.13191.10.3.4.10.1.3.1.5 |
oacAAATacacsServerRowStatusThe Rowstatus for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.10.1.3.1.6 |
oacAAATacacsConfigUseUsernameusage of user name for authentication for enable command.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.10.1.4 |
oacAAAAuthenticationServerConfigTableAAA configuration on OneOS The AAA servers can be configured to either authenticate user login or authenticate enable commands for a given user. OneOS can either use all radius servers or all tacas servers or a group of configured radius servers or a group of configured tacacs servers or only the local database. By default if a radius/tacacs servers are configured, ONEOS will use the AAA servers in the order in which they are configured. The following commands are available to configure the AAA servers. aaa authentication login {default|console|network} {<group-name>|radius|tacacs} aaa authentication enable {default|console|network} {<group-name>|radius|tacacs} Hence the following will be the attributes for the AAA authentication configuration table 1) Authentication for (login or enable) Integer as enum 2) Authentication from (default or console or network) Integer as enum 3) Authentication servertype String SEQUENCE OF OacAAAAuthenticationServerConfigEntry .1.3.6.1.4.1.13191.10.3.4.10.1.5 |
oacAAAAuthenticationServerConfigEntryAn entry will define how a login/enable from console or network will use which group of servers of either radius or tacacs. Each entry is uniquly identified by an dual index. OacAAAAuthenticationServerConfigEntry .1.3.6.1.4.1.13191.10.3.4.10.1.5.1 |
oacAAAAuthenticationFeatureA user can login to the device and just monitor. A user can configure the device when he enters the enabled mode. The device will challenge an user for authentication when ever he enters and enabled command.rw Enumeration .1.3.6.1.4.1.13191.10.3.4.10.1.5.1.1 |
oacAAAAuthenticationReqSrcThe user can access the device either thru the default mode or from the console or from the network like ssh and telnet.rw Enumeration .1.3.6.1.4.1.13191.10.3.4.10.1.5.1.2 |
oacAAAAuthenticationSvrTypeThe authentication servers can be either a group of radius serves or a group of tacacs servers or all radius servers or all tacacs server.rw OCTET STRING .1.3.6.1.4.1.13191.10.3.4.10.1.5.1.3 |
oacAAAAuthenticationServerRowStatusThe Row status for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.10.1.5.1.4 |
oacAAAAuthenticationConfigBannerSeqTableThis table holds upto 40 banner messages used in authentication SEQUENCE OF OacAAAAuthenticationConfigBannerSeqEntry .1.3.6.1.4.1.13191.10.3.4.10.1.6 |
oacAAAAuthenticationConfigBannerSeqEntryEach entry will hold one banner string OacAAAAuthenticationConfigBannerSeqEntry .1.3.6.1.4.1.13191.10.3.4.10.1.6.1 |
oacAAAAuthenticationBannerSequenceThe maximum number of strings that can be stored are 40.rw INTEGER .1.3.6.1.4.1.13191.10.3.4.10.1.6.1.1 |
oacAAAAuthenticationBannerStringbanner test is a set of string maximum upto 255 characters.rw OCTET STRING .1.3.6.1.4.1.13191.10.3.4.10.1.6.1.2 |
oacAAAAuthenticationBannerSeqRowStatusThe row status of this entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.10.1.6.1.3 |
oacAAAGroupServerConfigTableConfiguring AAA Group Servers: The cli command to configure a group of servers aaa group server { radius | tacacs } <group-name> server {<A.B.C.D>|<hostname> } The SNMP table for group servers will be 1) group name OCTET STRING 2) group type INTEGER (ENUM) 3) server OCTET STRING SEQUENCE OF OacAAAGroupServerConfigEntry .1.3.6.1.4.1.13191.10.3.4.10.1.7 |
oacAAAGroupServerConfigEntryA group server entry will hold information about an configured radius or tacacs server to which group it belongs to. OacAAAGroupServerConfigEntry .1.3.6.1.4.1.13191.10.3.4.10.1.7.1 |
oacAAAServerGroupNameThe group name which is the index for each entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.10.1.7.1.1 |
oacAAAServerGroupTypeOnly server of type defined above can be added to this group. all the servers can be either of type radius or type tacacs.rw Enumeration .1.3.6.1.4.1.13191.10.3.4.10.1.7.1.2 |
oacAAAServerGroupServerInfoThis object will hold the inforamtion about the server, which can be an IPv4 Address or an Hostname.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.10.1.7.1.3 |
oacAAAServerGroupRowStatusThe row status for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.10.1.7.1.4 |
oacAAAAuthorizationConfigCmdLevelDefTacacsTo enable AAA authorization for a given privilege levelrw INTEGER .1.3.6.1.4.1.13191.10.3.4.10.1.8 |
oacAAAAccCmdsConfigTableThis table provides the information for AAA accounting commands. SNMP table for the above command will be 1) access level of the command INTEGER 0-15 2) tacacs+ group OCTET STRING default all. SEQUENCE OF OacAAAAccCmdsConfigEntry .1.3.6.1.4.1.13191.10.3.4.10.1.9 |
oacAAAAccCmdsConfigEntryeach entry will define an access level and the tacacs group name. OacAAAAccCmdsConfigEntry .1.3.6.1.4.1.13191.10.3.4.10.1.9.1 |
oacAAAAccCmdAccessLevelThe command access level for which accounting has to be done.rw INTEGER .1.3.6.1.4.1.13191.10.3.4.10.1.9.1.1 |
oacAAAAccTacacsGroupNameThe group of servers that can be used to perform accounting for a given command access level.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.10.1.9.1.2 |
oacAAAAccCmdsRowStatusThe row status for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13191.10.3.4.10.1.9.1.3 |
oacAAAAccConfigExecStartStopSet EXEC accounting and the method is default, to use start-stop record accounting notice. Uses TACACS+ server for accounting.rw OCTET STRING .1.3.6.1.4.1.13191.10.3.4.10.1.10 |
oacAAAAccConfigSystemStartStopSet System accounting and the method is default, to use start-stop record accounting notice. Uses TACACS+ server for accounting.rw OCTET STRING .1.3.6.1.4.1.13191.10.3.4.10.1.11 |
oacAAAConfigConformance OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.10.2 |
oacAAAConfigGroups OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.10.2.1 |
oacAAAConfigGroupGroup of AAA objects Unknown .1.3.6.1.4.1.13191.10.3.4.10.2.1.1 |
oacAAACompls OBJECT IDENTIFIER .1.3.6.1.4.1.13191.10.3.4.10.2.2 |