OG-SIGNAL-MIB

AI MIB Summary

The OG-SIGNAL-MIB module enables the monitoring and management of serial console port signal states and line conditions on Opengear devices via SNMP. It exposes specific metrics regarding DCD, DSR, DTR, RTS, and CTS signal transitions to facilitate remote serial port troubleshooting and status verification.

Opengear serial console signal MIB

Main OID:

ogSignalMib.1.3.6.1.4.1.25049.10.11

Objects

Active

Status

Dependencies

Imported Objects

Objects

19 total

Object Name	Syntax	OID
ogSignalMibOpengear serial console signal MIB MODULE-IDENTITY `.1.3.6.1.4.1.25049.10.11`	MODULE-IDENTITY	`.1.3.6.1.4.1.25049.10.11`
ogSignalMibNotificationPrefix OBJECT IDENTIFIER `.1.3.6.1.4.1.25049.10.11.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.25049.10.11.2`
ogsgnlMibNotifications OBJECT IDENTIFIER `.1.3.6.1.4.1.25049.10.11.2.0`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.25049.10.11.2.0`
ogsgnlEventOccurredThe notification sent when a signal change occurs NOTIFICATION-TYPE `.1.3.6.1.4.1.25049.10.11.2.0.200`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.25049.10.11.2.0.200`
ogSignalMibConformance OBJECT IDENTIFIER `.1.3.6.1.4.1.25049.10.11.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.25049.10.11.3`
ogSignalMibCompliances OBJECT IDENTIFIER `.1.3.6.1.4.1.25049.10.11.3.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.25049.10.11.3.1`
ogSignalMibComplianceThe compliance statement for entities which implement the Opengear Signal MIB. Unknown `.1.3.6.1.4.1.25049.10.11.3.1.1`	Unknown	`.1.3.6.1.4.1.25049.10.11.3.1.1`
ogSignalMibGroups OBJECT IDENTIFIER `.1.3.6.1.4.1.25049.10.11.3.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.25049.10.11.3.2`
ogSignalMibGroupA collection of objects providing the signal MIB capability. Unknown `.1.3.6.1.4.1.25049.10.11.3.2.1`	Unknown	`.1.3.6.1.4.1.25049.10.11.3.2.1`
ogsgnlNotificationsGroupA collection of notification(s) for signal system. Unknown `.1.3.6.1.4.1.25049.10.11.3.2.2`	Unknown	`.1.3.6.1.4.1.25049.10.11.3.2.2`
ogSignalMibObjects OBJECT IDENTIFIER `.1.3.6.1.4.1.25049.10.11.10`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.25049.10.11.10`
ogsgnlEvent OBJECT IDENTIFIER `.1.3.6.1.4.1.25049.10.11.10.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.25049.10.11.10.1`
ogsgnlEventTableA table of serial signal events generated by this device. SEQUENCE OF OgSgnlEventEntry `.1.3.6.1.4.1.25049.10.11.10.1.1`	SEQUENCE OF OgSgnlEventEntry	`.1.3.6.1.4.1.25049.10.11.10.1.1`
ogsgnlEventEntryA console connection event occuring at this device. Each entry is indexed by a message index. OgSgnlEventEntry `.1.3.6.1.4.1.25049.10.11.10.1.1.1`	OgSgnlEventEntry	`.1.3.6.1.4.1.25049.10.11.10.1.1.1`
ogsgnlEventIndexA monotonically increasing integer for the sole purpose of indexing messages. When it reaches the maximum value the agent flushes the table and wraps the value back to 1. Integer32 `.1.3.6.1.4.1.25049.10.11.10.1.1.1.1`	Integer32	`.1.3.6.1.4.1.25049.10.11.10.1.1.1.1`
ogsgnlEventTypeThe particular signal which changedro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.25049.10.11.10.1.1.1.10`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.25049.10.11.10.1.1.1.10`
ogsgnlEventStateThe current signal statero DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.25049.10.11.10.1.1.1.11`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.25049.10.11.10.1.1.1.11`
ogsgnlEventPortNumberSerial port number on which this signal appliesro Integer32 `.1.3.6.1.4.1.25049.10.11.10.1.1.1.12`	Integer32	`.1.3.6.1.4.1.25049.10.11.10.1.1.1.12`
ogsgnlEventPortLabelThe label for the serial port where the signal applies.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.25049.10.11.10.1.1.1.13`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.25049.10.11.10.1.1.1.13`