ODS-TRMIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
77
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
77 total| Object Name |
|---|
ods OBJECT IDENTIFIER .1.3.6.1.4.1.50 |
enc OBJECT IDENTIFIER .1.3.6.1.4.1.50.1 |
enBridge OBJECT IDENTIFIER .1.3.6.1.4.1.50.2 |
tokenRing OBJECT IDENTIFIER .1.3.6.1.4.1.50.3 |
trMib1 OBJECT IDENTIFIER .1.3.6.1.4.1.50.3.1 |
trSystem OBJECT IDENTIFIER .1.3.6.1.4.1.50.3.1.1 |
trBox OBJECT IDENTIFIER .1.3.6.1.4.1.50.3.1.1.1 |
boxChassisIdThe type of chassis used for the concentrator.
For modular concentrators, the hardware is
further qualifed by the value of cardId for each
card installed in the concentrator.ro Enumeration .1.3.6.1.4.1.50.3.1.1.1.1 |
boxMaxDeinCountContains the maximum number of successive
de-inserts that can occur before a given
port is shut off automatically.rw INTEGER .1.3.6.1.4.1.50.3.1.1.1.4 |
boxMaxDeinDeltaThe maximum time in seconds between successive
de-inserts for a given port for which the
portDeinCount will be incremeneted.rw INTEGER .1.3.6.1.4.1.50.3.1.1.1.5 |
boxResetSetting to 1 will reboot the agent.rw INTEGER .1.3.6.1.4.1.50.3.1.1.1.7 |
boxFWVersionThe version of the firmware that is currently
resident.ro DisplayString .1.3.6.1.4.1.50.3.1.1.1.8 |
trapIdThe trap Id for this particular trap. It is a
one-up counter that identifies this trap. INTEGER .1.3.6.1.4.1.50.3.1.1.1.9 |
changedOidThe Object Id of the variable that is the
reason for sending the trap. OBJECT IDENTIFIER .1.3.6.1.4.1.50.3.1.1.1.10 |
changedValueThe value of the variable that is being
trapped. INTEGER .1.3.6.1.4.1.50.3.1.1.1.11 |
changedDescrA textual description of the variable, the slot,
the port, and the new value that is being trapped. DisplayString .1.3.6.1.4.1.50.3.1.1.1.12 |
tftpAddressThe IP address from which TFTP packets will be
accepted by the agent.rw IpAddress .1.3.6.1.4.1.50.3.1.1.1.13 |
dosCommandA Dos command that will be executed.rw DisplayString .1.3.6.1.4.1.50.3.1.1.1.14 |
dosExitCodeThe status of the last executed DOS command.ro INTEGER .1.3.6.1.4.1.50.3.1.1.1.15 |
enbBcnIsoAlgEnable for the Beacon Isolation Algorithm.
When this variable is set to enable, then
if the ring beacons and is unable to recover
itself, the MAU will execute the Beacon
Isolation Algorithm. This algorithm will
attempt to isolate the problem in the ring to
a single port. This algorithm should
ONLY be enabled if all MAU's in the ring are
ODS MAU's with in-band agents that also have
enbBcnIsoAlg set to enable. NOTE: this should
be set to disable for all MAU's in the ring
if any of the in-band agents has control of
an MAU that has multiple rings.rw Enumeration .1.3.6.1.4.1.50.3.1.1.1.16 |
trCards OBJECT IDENTIFIER .1.3.6.1.4.1.50.3.1.1.2 |
cardNumSlotsThe number of slots in the concentrator. For
modular concentrators, this value is the maximum
number of cards that can be installed. For
non-modular concentrators, the value is always
one.ro INTEGER .1.3.6.1.4.1.50.3.1.1.2.1 |
cardNumCardsThe number of cards actually installed in the
concentrator. For non-modular concentrators, the
value is always one.ro INTEGER .1.3.6.1.4.1.50.3.1.1.2.2 |
cardTableA list of card entries for each card installed in
the concentrator. The number of entries is given
by the value of CardNumCards. SEQUENCE OF CardEntry .1.3.6.1.4.1.50.3.1.1.2.3 |
cardEntryA card entry containing objects pertaining to a
card installed in the concentrator. CardEntry .1.3.6.1.4.1.50.3.1.1.2.3.1 |
cardBypassThe current bypass state of the card.rw Enumeration .1.3.6.1.4.1.50.3.1.1.2.3.1.1 |
cardRingStarThe Ring/Star mode of the card.rw Enumeration .1.3.6.1.4.1.50.3.1.1.2.3.1.2 |
cardRingSpeedThe Ring Speed of the card.ro Enumeration .1.3.6.1.4.1.50.3.1.1.2.3.1.3 |
cardCableTypeThe card's Cable Type.rw Enumeration .1.3.6.1.4.1.50.3.1.1.2.3.1.4 |
cardResetThe card's Reset Switch state.ro Enumeration .1.3.6.1.4.1.50.3.1.1.2.3.1.6 |
cardSwitchThe state of the HW/SW switch on the card.ro Enumeration .1.3.6.1.4.1.50.3.1.1.2.3.1.7 |
cardControlWho currently controls the card, HW or SW.ro Enumeration .1.3.6.1.4.1.50.3.1.1.2.3.1.8 |
cardIdThe type of card installed in the concentrator.
If the chassis is a modular chassis, then cardId
defines the type of card. However, if the chassis
is an 841 or 861 type chassis, then boxChassisId
fully defines the type of card installed, so for
a non-modular chassis the cardId specifies the
Revision level.ro Enumeration .1.3.6.1.4.1.50.3.1.1.2.3.1.9 |
cardIndexThe slot in which the card is installed. This
value uniquely identifies the card. Its value
ranges between 1 and the value of CardNumSlots.ro INTEGER .1.3.6.1.4.1.50.3.1.1.2.3.1.10 |
cardDescripA textual description of the card including
the ODS model number, media type and number of
ports.ro DisplayString .1.3.6.1.4.1.50.3.1.1.2.3.1.11 |
cardNumPortsThe number of configurable ports on the card.
For some cards, the value may be zero.ro INTEGER .1.3.6.1.4.1.50.3.1.1.2.3.1.12 |
cardHasPortsThis value describes if there are configurable
user ports on the card.ro Enumeration .1.3.6.1.4.1.50.3.1.1.2.3.1.13 |
cardHasRingIntThis value describes if the card has ring in and
ring out ports.ro Enumeration .1.3.6.1.4.1.50.3.1.1.2.3.1.14 |
cardHasTWThis value describes if the card's user ports are
twisted wire or not.ro Enumeration .1.3.6.1.4.1.50.3.1.1.2.3.1.15 |
cardHasCtrlThis value describes if the card has a HW/SW Control
switch or not.ro Enumeration .1.3.6.1.4.1.50.3.1.1.2.3.1.16 |
cardHasBypassThis value describes if the card has a Bypass
switch or not.ro Enumeration .1.3.6.1.4.1.50.3.1.1.2.3.1.17 |
trPorts OBJECT IDENTIFIER .1.3.6.1.4.1.50.3.1.1.3 |
portTableA list of port entries for each interface port in
the concentrator. The number of entries is given
by the sum of CardNumPorts for each card in the
CardTable. SEQUENCE OF PortEntry .1.3.6.1.4.1.50.3.1.1.3.1 |
portEntryA port entry containing objects pertaining to an
interface port in the concentrator. PortEntry .1.3.6.1.4.1.50.3.1.1.3.1.1 |
portEnableThe current enable status of the port. If
the value is off(2), no data is passed through
the port.rw Enumeration .1.3.6.1.4.1.50.3.1.1.3.1.1.1 |
portActStatusWhether we currently see activity on the port.
If we have activity, then the value is true(1).ro Enumeration .1.3.6.1.4.1.50.3.1.1.3.1.1.2 |
portRingInsertWhether someone is currently inserted onto the
ring through this port. If true(1), then someone
is inserted onto this port.ro Enumeration .1.3.6.1.4.1.50.3.1.1.3.1.1.3 |
portDeinCountCurrent count of successive deinserts that occurred
on this port, each within MaxDeinDelta of the previous
deinsert.rw Counter .1.3.6.1.4.1.50.3.1.1.3.1.1.4 |
portCardThe card on which the port exists. The card
identified by this value is the same card as
identified by the same value of CardIndex.ro INTEGER .1.3.6.1.4.1.50.3.1.1.3.1.1.5 |
portIndexAn integer which uniquely identifes this port on
the card. Its value ranges between 1 and the
value of CardNumPorts for the card.ro INTEGER .1.3.6.1.4.1.50.3.1.1.3.1.1.6 |
trRing OBJECT IDENTIFIER .1.3.6.1.4.1.50.3.1.1.4 |
ringportTableA list of entries for Ring In and Ring Out
ports of the concentrator. SEQUENCE OF RingEntry .1.3.6.1.4.1.50.3.1.1.4.1 |
ringEntryA ring port entry containing objects pertaining
the concentrator's Ring In and Ring Out ports. RingEntry .1.3.6.1.4.1.50.3.1.1.4.1.1 |
rpModeThe current status of the ring port.rw Enumeration .1.3.6.1.4.1.50.3.1.1.4.1.1.1 |
rpFOTWWhether fiber optic or twisted wire are
currently being used by the ring port.rw Enumeration .1.3.6.1.4.1.50.3.1.1.4.1.1.2 |
rpLoopBackWhether the concentrator's ring port is in
loopback mode.ro Enumeration .1.3.6.1.4.1.50.3.1.1.4.1.1.3 |
rpVoltSenseWhether voltage is being sensed across the
ring port.ro Enumeration .1.3.6.1.4.1.50.3.1.1.4.1.1.4 |
rpActStatusWhether we currently see activity on the port.
if we have activity, then the value is true(1).ro Enumeration .1.3.6.1.4.1.50.3.1.1.4.1.1.5 |
rpCarrSenseWhether a carrier is sensed on the ring port.ro Enumeration .1.3.6.1.4.1.50.3.1.1.4.1.1.6 |
rpCardThe card on which the ring ports exist. The
card identified by this value is the same card as
identified by the same value of CardIndex.ro INTEGER .1.3.6.1.4.1.50.3.1.1.4.1.1.7 |
rpIndexAn integer which uniquely identifies this ring
port on the card. Its value ranges between
1 (Ring In) and 2 (Ring Out).ro Enumeration .1.3.6.1.4.1.50.3.1.1.4.1.1.8 |
rpHasTWWhether or not the ring port has Twisted Wire.ro Enumeration .1.3.6.1.4.1.50.3.1.1.4.1.1.9 |
trTrapEnable OBJECT IDENTIFIER .1.3.6.1.4.1.50.3.1.1.5 |
teLoopBackThe Loopback state for a ring port has changed.
This trap will be sent to the defined management
station(s) if the value of teLoopBack enabled(1).rw Enumeration .1.3.6.1.4.1.50.3.1.1.5.1 |
teModeThe state of the Ring Port mode switch has
changed (Normal, Internal Loop, Auto Loop).
This trap will be sent to the defined management
station(s) if the value of teMode is enabled(1).rw Enumeration .1.3.6.1.4.1.50.3.1.1.5.2 |
teFOTWThe state of the Fiber Optic/Twisted Wire
switch has changed. This trap will be sent to
the defined management station(s) if the value
of teFOTW is enabled(1).rw Enumeration .1.3.6.1.4.1.50.3.1.1.5.3 |
teRingInsertA user was inserted onto the ring or de-inserted
from the ring. This trap will be sent to
the defined management station(s) if the value
of teRingInsert is enabled(1).rw Enumeration .1.3.6.1.4.1.50.3.1.1.5.4 |
teDeinCountThe De-insert count for one of the user ports
is now greater than 1. This trap will be sent to
the defined management station(s) if the value
of teDeinCount is enabled(1).rw Enumeration .1.3.6.1.4.1.50.3.1.1.5.5 |
teEnableThe state of one of the user port switches has
changed. This trap will be sent to the defined
management station(s) if the value of
teEnable is enabled(1).rw Enumeration .1.3.6.1.4.1.50.3.1.1.5.6 |
teBypassThe state of the Bypass control switch has
changed. This trap will be sent to the defined
management station(s) if the value of teBypass
is enabled(1).rw Enumeration .1.3.6.1.4.1.50.3.1.1.5.7 |
teRingStarThe state of the Ring/Star control switch has
changed. This trap will be sent to the defined
management station(s) if the value of teRingStar
is enabled(1).rw Enumeration .1.3.6.1.4.1.50.3.1.1.5.8 |
teRingSpeedThe state of the Ring Speed (Clock) control switch
has changed. This trap will be sent to the defined
management station(s) if the value of te_4_16 is
enabled(1).rw Enumeration .1.3.6.1.4.1.50.3.1.1.5.9 |
teCableTypeThe state of the Cable Type control switch has
changed. This trap will be sent to the defined
management station(s) if the value of teCableType
is enabled(1).rw Enumeration .1.3.6.1.4.1.50.3.1.1.5.10 |
teSwitchThe state of the HW/SW control switch has
changed. This trap will be sent to the defined
management station(s) if the value of teSwitch
is enabled(1).rw Enumeration .1.3.6.1.4.1.50.3.1.1.5.12 |
teLanManagerThe Ringin or Ringout has gone into Loopback.
This alert will be sent to IBM's Lan Manager
management station(s) if the value of teLanManager
is enabled(1).rw Enumeration .1.3.6.1.4.1.50.3.1.1.5.15 |
trAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.50.3.1.2 |
trBridge OBJECT IDENTIFIER .1.3.6.1.4.1.50.4 |