Npi-NuSwitch-COMMON-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
75
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
75 total| Object Name |
|---|
mgmt OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.2.2 |
RFC-1215 Unknown .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.2.2 |
directory OBJECT IDENTIFIER .1.3.6.1.1 |
experimental OBJECT IDENTIFIER .1.3.6.1.3 |
private OBJECT IDENTIFIER .1.3.6.1.4 |
enterprises OBJECT IDENTIFIER .1.3.6.1.4.1 |
npi OBJECT IDENTIFIER .1.3.6.1.4.1.1101 |
npi-Switching-MIB OBJECT IDENTIFIER .1.3.6.1.4.1.1101.2 |
switch-DS24 OBJECT IDENTIFIER .1.3.6.1.4.1.1101.2.13 |
switchBasicHubInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1101.2.13.1 |
switchHubMibVersionMIB version, 1 1 1 10000 -> 0.00.60ro INTEGER .1.3.6.1.4.1.1101.2.13.1.1 |
switchHubHwAgingSwitchEnable the HW aging or not. If enabled the default Aging
will be 300 secsrw Enumeration .1.3.6.1.4.1.1101.2.13.1.2 |
switchHubLedThe object indicates Hub's LED current status.ro OCTET STRING .1.3.6.1.4.1.1101.2.13.1.4 |
switchAddrSpanningTreefunctionThe object indicates that the spanning tree function
supports or not.ro Enumeration .1.3.6.1.4.1.1101.2.13.1.5 |
switchAddrSecurityfunctionThe object indicates the security function supports or not.ro Enumeration .1.3.6.1.4.1.1101.2.13.1.6 |
basicSwitchPortMonitoringfunctionThe object indicates the port monitor function supports or not.ro Enumeration .1.3.6.1.4.1.1101.2.13.1.7 |
basicSwitchVirtualLANfunctionThe object indicates the Virtual LAN function supports or not.ro Enumeration .1.3.6.1.4.1.1101.2.13.1.8 |
basicSwitchHubClearStatsClear switching hub's counters:
1. Bridge MIB (1.3.6.1.2.1.17.)
dot1dStpTopChange (.2.4.0)
2. Repeater MIB (1.3.6.1.2.1.22.)
!!! Only clear switching hub (unit=1) !!!
rptrMonitorGroupTotalFrames (.2.2.1.2)
rptrMonitorGroupTotalOctets (.2.2.1.3)
rptrMonitorGroupTotalErrors (.2.2.1.4)
3. Switch common MIB (1.3.6.1.4.1.1101.2.1.)
switchmonUnitCollision (.11.1)rw Enumeration .1.3.6.1.4.1.1101.2.13.1.11 |
basicSwitchRMONMIBfunctionThe object indicates the RMON MIB function supports or not.ro Enumeration .1.3.6.1.4.1.1101.2.13.1.12 |
switchBasicPortInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1101.2.13.2 |
switchPortTableBasic information for each port. SEQUENCE OF SwitchPortEntry .1.3.6.1.4.1.1101.2.13.2.1 |
switchPortEntryPort information entry. SwitchPortEntry .1.3.6.1.4.1.1101.2.13.2.1.1 |
switchPortIndexport number :
DS24 : ( 1 .. 24)
FE-1200 : ( 1 .. 12)
FE210 : ( 1 .. 12)
FE224: ( 1 .. 6)ro INTEGER .1.3.6.1.4.1.1101.2.13.2.1.1.1 |
switchPortTypeThe type of each port.ro Enumeration .1.3.6.1.4.1.1101.2.13.2.1.1.3 |
switchPortLinkThis object indicates the link status of each port is
up or down.ro Enumeration .1.3.6.1.4.1.1101.2.13.2.1.1.4 |
switchPortEnableEnable/disable status of the port,
default = enable(1).rw Enumeration .1.3.6.1.4.1.1101.2.13.2.1.1.5 |
switchPortFullDuplexFull/half duplex, default = disable(2),
Conditional Write: this object can be written only when
switchPortAutoNegotiation is disable and port is enabled.rw Enumeration .1.3.6.1.4.1.1101.2.13.2.1.1.6 |
switchPortVirtualLanModeStatusThe object indicates whether the port is in Virtual LAN mode.ro Enumeration .1.3.6.1.4.1.1101.2.13.2.1.1.8 |
switchPortSpeedPort data rate, this object can be writen only when
switchPortAutoNegotiation is set disable .rw Enumeration .1.3.6.1.4.1.1101.2.13.2.1.1.9 |
switchPortAutoNegotiationFunctionThe object indicates that the auto-negotiation function of
the port supports or not,
default = support(1).ro Enumeration .1.3.6.1.4.1.1101.2.13.2.1.1.10 |
switchPortAutoNegotiationEnable/disable the function of the port auto-negotiation,
default = enable (1).rw Enumeration .1.3.6.1.4.1.1101.2.13.2.1.1.11 |
switchPortMonitorInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1101.2.13.7 |
switchPortMonitorswitchA state to present whether the port monitor function is
ON or OF in the hub.
The default is OFF.rw Enumeration .1.3.6.1.4.1.1101.2.13.7.1 |
switchPortMonitorMaxCountMax. monitor count in this hub
DS24 = 23ro INTEGER .1.3.6.1.4.1.1101.2.13.7.2 |
switchPortMonitorActiveCountCurrent active monitor count in this hub.ro INTEGER .1.3.6.1.4.1.1101.2.13.7.3 |
switchPortMonitoringOperationOperation information.rw OCTET STRING .1.3.6.1.4.1.1101.2.13.7.4 |
switchPortMonitorMessageStatusThe new operation message.ro Enumeration .1.3.6.1.4.1.1101.2.13.7.5 |
switchVirtualLanInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1101.2.13.8 |
switchVirtualLanSwitchA state to present whether the virtul LAN function is
ON or OFF in the hub.
To OFF the switch must write by the original manager.
The default value is OFF.rw Enumeration .1.3.6.1.4.1.1101.2.13.8.1 |
switchVirtualLanOperationOperation information for Virtual LAN.rw OCTET STRING .1.3.6.1.4.1.1101.2.13.8.2 |
switchVirtualLanMessagethe operation message.ro Enumeration .1.3.6.1.4.1.1101.2.13.8.5 |
switchStatisticInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1101.2.13.10 |
switchStatisticPortTableA table that contains information about every
port that is associated with this transparent
bridge. SEQUENCE OF SwitchStatisticPortEntry .1.3.6.1.4.1.1101.2.13.10.1 |
switchStatisticPortEntryA list of information for each port of a
transparent bridge. SwitchStatisticPortEntry .1.3.6.1.4.1.1101.2.13.10.1.1 |
switchStatisticPortThe port number of the port for which this entry
contains Transparent bridging management
information.
FE-1200 : ( 1 .. 12)
FE-210 : ( 1 .. 12)
FE-224 : ( 1 .. 6)ro INTEGER .1.3.6.1.4.1.1101.2.13.10.1.1.1 |
switchStatisticPortInFramesThe number of frames that have been received by
this port from its segment. Note that a frame
received on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames.ro Counter .1.3.6.1.4.1.1101.2.13.10.1.1.2 |
switchStatisticPortOutFramesThe number of frames that have been transmitted
by this port to its segment. Note that a frame
transmitted on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames.ro Counter .1.3.6.1.4.1.1101.2.13.10.1.1.3 |
switchStatisticPortInDiscardsCount of valid frames received which were
discarded (i.e., filtered) by the Forwarding
Process.ro Counter .1.3.6.1.4.1.1101.2.13.10.1.1.4 |
switchStatisticPortInKBytesThe number of k-bytes of switchStatisticPortInFramero Counter .1.3.6.1.4.1.1101.2.13.10.1.1.5 |
switchStatisticPortOutKBytesThe number of k-bytes of switchStatisticPortOutFramero Counter .1.3.6.1.4.1.1101.2.13.10.1.1.6 |
switchStatisticPortRxFCSErrorThe number of received FCS error packet countro Counter .1.3.6.1.4.1.1101.2.13.10.1.1.7 |
switchStatisticPortRxAllignErrorThe number of received allignment error packet countro Counter .1.3.6.1.4.1.1101.2.13.10.1.1.8 |
switchStatisticPortRxRUNTErrorThe number of received RUNT error packet countro Counter .1.3.6.1.4.1.1101.2.13.10.1.1.9 |
switchStatisticPortRxFrameLongErrorThe number of received farme too long error packet countro Counter .1.3.6.1.4.1.1101.2.13.10.1.1.10 |
switchStatisticPortOutDiscardsCount of valid frames received which were
discarded (i.e., filtered) by the outgoing Forwarding
Process.ro Counter .1.3.6.1.4.1.1101.2.13.10.1.1.11 |
switchStatisticPortNetCollisionThe number of nework collision countro Counter .1.3.6.1.4.1.1101.2.13.10.1.1.12 |
switchStatisticPortHashCollisionThe number of forward collision countro Counter .1.3.6.1.4.1.1101.2.13.10.1.1.13 |
switchStatisticPortLossPacketThe number of loss packets after the input buffer fullro Counter .1.3.6.1.4.1.1101.2.13.10.1.1.14 |
switchMonUnitInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1101.2.13.11 |
switchmonUnitCollision11 1ro Counter .1.3.6.1.4.1.1101.2.13.11.1 |
switchSpanningTreeInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1101.2.13.14 |
switchSpanningTreeSwitchA switch to select whether the spanning tree is ON or OFF.
The default is ON. If the value is changed, the system need
to be restarted.rw Enumeration .1.3.6.1.4.1.1101.2.13.14.1 |
switchSnmpManagerTableThis table contains the information needed
for SNMP Management. SEQUENCE OF SwitchSnmpManagerEntry .1.3.6.1.4.1.1101.2.13.15 |
switchSnmpManagerEntry SwitchSnmpManagerEntry .1.3.6.1.4.1.1101.2.13.15.1 |
switchSnmpManagerIndexro INTEGER .1.3.6.1.4.1.1101.2.13.15.1.1 |
switchSnmpManagerHostnameThe host name of the management station which
has the SNMP access .rw DisplayString .1.3.6.1.4.1.1101.2.13.15.1.2 |
switchSnmpManagerIpAddrThe Internet address of the management station which
has the SNMP access .rw IpAddress .1.3.6.1.4.1.1101.2.13.15.1.3 |
switchSnmpManagerCommCommunity name used for SNMP management for
this stationrw DisplayString .1.3.6.1.4.1.1101.2.13.15.1.4 |
switchCommManagerTableThis table contains the information needed
for access permissions for community SEQUENCE OF SwitchCommManagerEntry .1.3.6.1.4.1.1101.2.13.16 |
switchCommManagerEntry SwitchCommManagerEntry .1.3.6.1.4.1.1101.2.13.16.1 |
switchCommManagerIndexro INTEGER .1.3.6.1.4.1.1101.2.13.16.1.1 |
switchCommManagerCommCommunity name used for SNMP management for
this stationrw DisplayString .1.3.6.1.4.1.1101.2.13.16.1.2 |
switchCommManagerGetThe object indicates whether this comminuty has
SNMP Get access or not.rw Enumeration .1.3.6.1.4.1.1101.2.13.16.1.3 |
switchCommManagerSetThe object indicates whether this comminuty has
SNMP Set access or not.rw Enumeration .1.3.6.1.4.1.1101.2.13.16.1.4 |
switchCommManagerTrapThe object indicates whether trap is set to this
comminuty or not.rw Enumeration .1.3.6.1.4.1.1101.2.13.16.1.5 |