NOTES-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for NOTES-MIB.
552
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
552 total| Object Name |
|---|
lotus OBJECT IDENTIFIER .1.3.6.1.4.1.334 |
RFC1155-SMI Unknown .1.3.6.1.4.1.334 |
notes OBJECT IDENTIFIER .1.3.6.1.4.1.334.72 |
lnUnknownEventTrapThis trap indicates that a Notes Event of Unknown severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book. TRAP-TYPE .1.3.6.1.4.1.334.72.0.0 |
lnFatalEventTrapThis trap indicates that a Notes Event of Fatal severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book. TRAP-TYPE .1.3.6.1.4.1.334.72.0.1 |
lnFailureEventTrapThis trap indicates that a Notes Event of Failure severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book. TRAP-TYPE .1.3.6.1.4.1.334.72.0.2 |
lnWarning1EventTrapThis trap indicates that a Notes Event of Warning1 severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book. TRAP-TYPE .1.3.6.1.4.1.334.72.0.3 |
lnWarning2EventTrapThis trap indicates that a Notes Event of Warning2 severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book. TRAP-TYPE .1.3.6.1.4.1.334.72.0.4 |
lnNormalEventTrapThis trap indicates that a Notes Event of Normal severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book. TRAP-TYPE .1.3.6.1.4.1.334.72.0.5 |
lnServerUpTrapThis trap indicates that the Notes server has come up. TRAP-TYPE .1.3.6.1.4.1.334.72.0.11 |
lnServerDownTrapThis trap indicates that the Notes server has gone down. TRAP-TYPE .1.3.6.1.4.1.334.72.0.12 |
lnServerPulseFailedTrapThis trap indicates that the Notes server is not responding
to the Lotus notes SNMP agent. The server may have crashed,
or may be busy. TRAP-TYPE .1.3.6.1.4.1.334.72.0.13 |
lnServerPulseRestoredTrapThis trap indicates that the Notes server is now responding
to the Lotus notes SNMP agent. TRAP-TYPE .1.3.6.1.4.1.334.72.0.14 |
lnSystemRebootingTrapThis trap indicates that the operating system the Notes server is
running has recieved an SNMP reboot request. The system is
now rebooting, this may take up to 5 minutes. TRAP-TYPE .1.3.6.1.4.1.334.72.0.15 |
lnServerNotRespondingTrapThis trap indicates that the Notes server has not responded
to the Lotus Notes SNMP agent for several minutes. There is
a chance that the Notes server may have crashed. TRAP-TYPE .1.3.6.1.4.1.334.72.0.16 |
lnServerNowRespondingTrapThis trap indicates that the Notes server is now responding
to the Lotus Notes SNMP agent after failing to respond for several
minutes. The server may be overloaded. TRAP-TYPE .1.3.6.1.4.1.334.72.0.17 |
lnAlarmStatisticThresholdThis trap is sent by NotesView for AIX when an alarm statistic
threshold is hit TRAP-TYPE .1.3.6.1.4.1.334.72.0.30 |
lnAlarmServerStatusChangeThis trap is sent by NotesView for AIX when the alarm status
of the server changes. TRAP-TYPE .1.3.6.1.4.1.334.72.0.31 |
lnAlarmPortStatusChangeThis trap is sent by NotesView for AIX when the alarm status
of a port changes. TRAP-TYPE .1.3.6.1.4.1.334.72.0.32 |
lnAlarmTaskStatusChangeThis trap is sent by NotesView for AIX when the alarm status
of a permanent task changes. TRAP-TYPE .1.3.6.1.4.1.334.72.0.33 |
lnAlarmNVStatClearThis trap is sent by NotesView for AIX to indicate that
an alarm statistic threshold condition has been cleared. TRAP-TYPE .1.3.6.1.4.1.334.72.0.34 |
lnAlarmAutoDiscoveryThis trap is sent by NotesView for AIX to indicate a discrepancy
between the information that Autodiscovery has detected, and what
the server has reported. TRAP-TYPE .1.3.6.1.4.1.334.72.0.35 |
lnAlarmServerNotesEventThis trap is sent by NotesView for AIX when a Notes
server event occurs. TRAP-TYPE .1.3.6.1.4.1.334.72.0.36 |
lnAlarmServerCfgChangeEventThis trap is sent by NotesView for AIX if the server
configuration has changed. TRAP-TYPE .1.3.6.1.4.1.334.72.0.37 |
lnAlarmMailProbeEventThis trap is sent by NotesView for AIX if the Mail Probe
task needs to generate an alarm. TRAP-TYPE .1.3.6.1.4.1.334.72.0.38 |
lnAlarmServerSNMPEventThis trap is sent by NotesView for AIX if the there is an
SNMP event that generates an alarm. TRAP-TYPE .1.3.6.1.4.1.334.72.0.39 |
lnAlarmNSFRemoteConsoleEventThis trap is sent by NotesView for AIX if the there is an
NSF remote console event TRAP-TYPE .1.3.6.1.4.1.334.72.0.40 |
lnAlarmMailBoxEventThis trap is sent by NotesView for AIX if the there
is a MailBox event. TRAP-TYPE .1.3.6.1.4.1.334.72.0.41 |
lnAlarmClearAllThis trap is sent by NotesView for AIX to cause the
alarm manager daemon (nvalarmgrd) to clear all alarms for all
servers and connections. The status of all objects on the map
will be reset to UNKNOWN. TRAP-TYPE .1.3.6.1.4.1.334.72.0.50 |
lnAlarmClearServersThis trap is sent by NotesView for AIX to cause the
alarm manager daemon (nvalarmgrd) to clear all alarms for a given
server or group of servers. The status of all the connections
for each serverId specified in the PDU will also be cleared.
The resulting status of all related objects on the map will
be reset to UNKNOWN. TRAP-TYPE .1.3.6.1.4.1.334.72.0.51 |
lnSignalAutodiscoveryStartThis trap is sent by the NotesView for AIX console when
the Autodiscovery process starts. The NotesView Alarm Manager
daemon (nvalarmgrd) will suspends all Alarm processing until
the Autodiscovery process is complete. TRAP-TYPE .1.3.6.1.4.1.334.72.0.52 |
lnSignalAutodiscoveryFinishedThis trap will be used by NotesView for AIX to signal the
Alarm Manager daemon (nvalarmgrd) that the Autodiscovery process
has completed or stopped. Alarm processing will continue at
this point, and all alarms that were received during Autodiscovery
will be processed. TRAP-TYPE .1.3.6.1.4.1.334.72.0.53 |
lnSignalServerConfigChgThis trap will be used by NotesView for AIX to signal the
Alarm Manager daemon (nvalarmgrd) that there has been
a Notes server configuration change. TRAP-TYPE .1.3.6.1.4.1.334.72.0.54 |
lnTrapRequestMostSevereStatusThis trap will be sent by the NotesView management station when it
needs to be updated with the most severe status of a given object TRAP-TYPE .1.3.6.1.4.1.334.72.0.55 |
lnTrapDisplayAlarmClearServersThis trap will be generated by the NotesView Alarm Manager in
order to display which server had its alarms cleared as a result
of receiving lnAlarmClearServers (trap type 51). One of these
traps will be generated for each server bound in the PDU for
the lnAlarmClearServers trap. For display only. The Alarm Manager
does not do any processing for this trap. TRAP-TYPE .1.3.6.1.4.1.334.72.0.60 |
lnTrapDisplayClearedAlarmThis trap will be sent by the NotesView management station when it
receives a clearing alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager. TRAP-TYPE .1.3.6.1.4.1.334.72.0.70 |
lnTrapDisplayIndeterminateAlarmThis trap will be sent by the NotesView management station when it
receives an indeterminate alarm from the poller (or console) to
display the alarm information on the NetView event cards. The alarms
are configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager. TRAP-TYPE .1.3.6.1.4.1.334.72.0.71 |
lnTrapDisplayWarningAlarmThis trap will be sent by the NotesView management station when it
receives a warning alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed on the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager. TRAP-TYPE .1.3.6.1.4.1.334.72.0.72 |
lnTrapDisplayMinorAlarmThis trap will be sent by the NotesView management station when it
receives a minor alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager. TRAP-TYPE .1.3.6.1.4.1.334.72.0.73 |
lnTrapDisplayCriticalAlarmThis trap will be sent by the NotesView management station when it
receives a critical alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager. TRAP-TYPE .1.3.6.1.4.1.334.72.0.74 |
lnTrapDisplayMajorAlarmThis trap will be sent by the NotesView management station when it
receives a major alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager. TRAP-TYPE .1.3.6.1.4.1.334.72.0.75 |
lnInfo OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1 |
lnStats OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1 |
lnAllStatsTableA table containing a one statistic per entry view of the
entire Notes server statistics structure. SEQUENCE OF LnAllStatsEntry .1.3.6.1.4.1.334.72.1.1.1 |
lnAllStatsEntryThe entry type definition for the lnAllStatsTable. LnAllStatsEntry .1.3.6.1.4.1.334.72.1.1.1.1 |
lnStatisticIndexA unique value for each statistic in the Notes server
statistics structure.ro INTEGER .1.3.6.1.4.1.334.72.1.1.1.1.1 |
lnStatisticStringA string describing one statistic from the Notes
Server statistics structure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.1.1.2 |
lnStatsStartTimeTime and date at which the statistics agent was
last started. Represented as the number of seconds
since midnight 1/1/70 GMT (UNIX epoch).ro INTEGER .1.3.6.1.4.1.334.72.1.1.2 |
lnStatsCurrentTimeTime and date of the last statistics update. Represented
as the number of seconds since midnight 1/1/70 GMT
(UNIX epoch).ro INTEGER .1.3.6.1.4.1.334.72.1.1.3 |
lnMail OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.4 |
lnDeadMailNumber of dead (undeliverable) mail messages.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.1 |
lnDeliveredMailNumber of messges received by router.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.2 |
lnTotalMailFailuresTotal number of routing failures since the
server started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.3 |
lnTotalRoutedMailTotal number of mail messages routed since the
server started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.4 |
lnTransferredMailNumber of messages router attempted to transfer.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.5 |
lnWaitingMailNumber of mail messages waiting to be routed.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.6 |
lnNumWaitingRecipientsNumber of pending mail messages awaiting local delivery.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.7 |
lnMailDomainNotes server's mail domain.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.4.8 |
lnAverageMailDeliverTimeAverage time for mail delivery in seconds.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.9 |
lnAverageMailServerHopsAverage number of server hops for mail delivery.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.10 |
lnAverageMailSizeDeliveredAverage size of mail messages delivered in bytes.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.11 |
lnMaximumMailDeliverTimeMaximum time for mail delivery in seconds.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.12 |
lnMaximumMailServerHopsMaximum number of server hops for mail delivery.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.13 |
lnMaximumMailSizeDeliveredMaximum size of mail delivered in bytes.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.14 |
lnMinimumMailDeliverTimeMinimum time for mail delivery in seconds.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.15 |
lnMinimumMailServerHopsMinimum number of server hops for mail delivery.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.16 |
lnMinimumMailSizeDeliveredMinimum size of mail delivered in bytes.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.17 |
lnTotalKBTransferredTotal mail transferred in kilobytes.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.18 |
lnMailTransferFailuresNumber of mail messages the router was unable to transfer.ro INTEGER .1.3.6.1.4.1.334.72.1.1.4.19 |
lnReplica OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.5 |
lnRepDocsAddedNumber of docs added via replication since server
was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.1 |
lnRepDocsDeletedNumber of docs deleted via replication since server
was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.2 |
lnRepDocsUpdatedNumber of docs updated via replication since server
was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.3 |
lnRepFailedNumber of replications that generated an error.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.4 |
lnRepSuccessfulNumber of successful replications.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.5 |
lnReplicaCluster OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.5.6 |
lnRepClusterDocsAddedThe number of documents added by the cluster replicatorro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.1 |
lnRepClusterDocsDeletedThe number of documents deleted by the cluster replicatorro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.2 |
lnRepClusterDocsUpdatedThe number of documents updated by the cluster replicatorro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.3 |
lnRepClusterFailedThe number of failed replications since server startup.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.4 |
lnRepClusterFilesLocalThe number of databases on the current server for which
there are replicas on other servers in the cluster.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.5 |
lnRepClusterFilesRemoteThe number of databases on other servers to which the
cluster replicator pushes changes.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.6 |
lnRepClusterRetrySkippedThe number of times the cluster replicator did not attempt
to replicate a database. The retry is skipped when the
destination server is known to be unreachable, or the database
is waiting for another retry attempt.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.7 |
lnRepClusterRetryWaitingThe number of replicas that are waiting for retry attempts.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.8 |
lnRepClusterSecondsOnQueueThe amount of time in seconds that the last database
replicated spent on the work queue.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.9 |
lnRepClusterSecondsOnQueueAvgThe average amount of time in seconds that a database
spent on the work queue.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.10 |
lnRepClusterSecondsOnQueueMaxThe maximum amount of time in seconds that a database
spent on the work queue.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.11 |
lnRepClusterServersThe number of other servers in the cluster that are receiving
replications from this server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.12 |
lnRepClusterSessionBytesInThe total number of bytes received during cluster replicationro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.13 |
lnRepClusterSessionBytesOutThe total number of bytes sent during cluster replicationro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.14 |
lnRepClusterSuccessfulThe number of successful replications since server startup.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.15 |
lnRepClusterWorkQueueDepthThe current number of databases awaiting replication by
the cluster replicator.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.16 |
lnRepClusterWorkQueueDepthAvgThe average work queue depth since server startup.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.17 |
lnRepClusterWorkQueueDepthMaxThe maximum depth reached by the work queue since server startup.ro INTEGER .1.3.6.1.4.1.334.72.1.1.5.6.18 |
lnServer OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.6 |
lnServerTask OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.6.1 |
lnTaskCountNumber of Notes server tasks currently executing.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.1.1 |
lnTaskTableA table containing one entry for each Notes server
task that is actually running. SEQUENCE OF LnTaskEntry .1.3.6.1.4.1.334.72.1.1.6.1.2 |
lnTaskEntryThe entry type definition for the lnTaskTable. LnTaskEntry .1.3.6.1.4.1.334.72.1.1.6.1.2.1 |
lnTaskIndexA unique value for each entry in lnTaskTable.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.1.2.1.1 |
lnTaskTypeThe type of server task being represented by this entryro Enumeration .1.3.6.1.4.1.334.72.1.1.6.1.2.1.2 |
lnTaskDataInformation associated with this task entry. See the
description for lnTaskType.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.1.2.1.3 |
lnTaskNameThe actual name of the task as it appears in the
SERVER.TASK statistic on the serverro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.1.2.1.4 |
lnReplicatorStatusStatus of the Replicator task. Provided as a separate MIB
variable for the sake of efficiency.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.1.3 |
lnRouterStatusStatus of the Router task. Provided as a separate MIB
variable for the sake of efficiency.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.1.4 |
lnEventStatusStatus of the Event task. Provided as a separate MIB
variable for the sake of efficiency.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.1.5 |
lnServerInfo OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.6.2 |
lnServerNameServer Name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.2.1 |
lnServerTitleTitle assigned to this server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.2.2 |
lnServerAdministratorsContents of Administrator field from server record in
Public Address book.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.2.3 |
lnServerNotesVersionRelease of the Notes server that is running.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.2.4 |
lnServerSystemVersionRelease of the Operating System running on the server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.2.5 |
lnServerBootIDUnique number identifying the time this server was last booted.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.2.6 |
lnServerDataPathDrive and directory defined as this server's data directory.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.2.7 |
lnServerSwapPathDrive and directory for this server's swap file
(NOTE: this stat relies on the NOTES.INI variable
'SWAPPATH' if config.sys contains a swap path
different from the default.)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.2.8 |
lnServerRS232PortsNumber of RS232 ports on this server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.2.9 |
lnServerCoprocessorReturns 'Yes', if server is a 486 or 386 w/ 387, otherwise, Returns 'No'.ro Enumeration .1.3.6.1.4.1.334.72.1.1.6.2.10 |
lnServerOSOperating System the current Notes server is running.ro Enumeration .1.3.6.1.4.1.334.72.1.1.6.2.11 |
lnServerCPUCountThe number of processors installed on this server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.2.12 |
lnServerCPUTypeThe type of processor installed on the server (386,486, Pentium, etc).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.2.13 |
lnServerUsersTableA table containing one entry for each Notes user
on the server. SEQUENCE OF LnServerUsersEntry .1.3.6.1.4.1.334.72.1.1.6.2.14 |
lnServerUsersEntryThe entry type definition for the lnServerUsersTable. LnServerUsersEntry .1.3.6.1.4.1.334.72.1.1.6.2.14.1 |
lnServerUsersIndexA unique value for each entry in lnServerUsersTable.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.2.14.1.1 |
lnServerUserNameNotes UserName of server user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.2.14.1.2 |
lnServerUserSessionIDThe user's Notes session ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.2.14.1.3 |
lnServerUserAccessedDBsThe number of databases accessed by the users.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.2.14.1.4 |
lnServerPortsA list of ports on the server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.2.15 |
lnServerPoweredByIndicates what is powering the Domino server. A value here
would indicate the system is running Release 4.5 or better
of the Domino server. Value should = Notesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.2.16 |
lnServerStats OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.6.3 |
lnServerDroppedSessionsNumber of dropped sessions.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.1 |
lnServerTransPerMinAverage number of transactions per minute since the
server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.2 |
lnServerTransPerMinPeakPeak number of transactions that took place in any
given minute since the server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.3 |
lnServerTransPerMinPeakTimeDate and time when the peak number of transactions
per minute was last reached. Represented as the number
of seconds since midnight 1/1/70 GMT (UNIX epoch).ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.4 |
lnServerTransTotalTotal number of transactions the server has completed
since it was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.5 |
lnServerUsersNumber of users with sessions open on the server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.6 |
lnServerUsers1MinPeakThe peak number of concurrent users active
within the last minute.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.7 |
lnServerUsers1MinPeakTimeDate and time when the peak number of active concurrent
users were reached within the last minute. Represented as
the number of seconds since midnight 1/1/70 GMT (UNIX epoch).ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.8 |
lnServerUsers5MinPeakThe peak number of concurrent users that were active
within the last five minutes.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.9 |
lnServerUsers5MinPeakTimeDate and time when the peak number of active concurrent
users were reached within the last five minutes. Represented
as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.10 |
lnServerUsersPeakThe peak number of concurrent users with open sessions
since the server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.11 |
lnServerUsersPeakTimeDate and time when the peak number of concurrent users
with open sessions was last reached. Represented as the
number of seconds since midnight 1/1/70 GMT (UNIX epoch).ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.12 |
lnServerOpenReqMaxUsersThe number of times that a client has attempted to open
a database on this server when the server was at its
MAXUSERS limit.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.13 |
lnServerOpenReqPreV4ClientThe number of times Notes Release 4.0 (or higher)
clients have attempted to open a database on this server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.14 |
lnServerOpenReqRestrictedThe number of times that a client has attempted to open
a database on this server when the server was RESTRICTED.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.15 |
lnServerOpenReqV4ClientThe number of times Notes Clients post Release 4.0 have
attempted to open a database on this server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.16 |
lnServerBusyTimeQueryReceivedCountThe number of external 'busytime' queries the server has received.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.17 |
lnServerBusyTimeQueryRetObjSchedThe number of schedules that were returned by queries counted
by lnServerBusyTimeQueriesReceivedCountro INTEGER .1.3.6.1.4.1.334.72.1.1.6.3.18 |
lnCluster OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.6.4 |
lnClusterNameThe name of the cluster this server is a member of.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.4.1 |
lnClusterAvailIndexThe current percentage or an index of the current server's
availability. A value of 0 indicates that the server has
virtually no available resources. A value of 100 indicates
that the server is completely available.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.2 |
lnClusterAvailThresholdThe current setting of this server's availability threshold.
The value is compared against lnClusterAvailIndex.
BUSY - The availability index has dropped below the threshold.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.3 |
lnClusterPortNameDefault PortName being used for intra cluster network traffic.
There is no default port. Any available and active port may
be used for intra cluster traffic.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.4.4 |
lnClusterProbeCountThe total number of times this cluster member has completed a
probe request for another cluster member.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.5 |
lnClusterProbeTimeoutIn Minutes. The interval between intra cluster probes or
cluster member heartbeats.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.6 |
lnClusterTableA table containing one entry for each configured Notes server
cluster member known by this server.ro SEQUENCE OF LnClusterEntry .1.3.6.1.4.1.334.72.1.1.6.4.7 |
lnClusterEntryThe entry type definition for the lnClusterTable.ro LnClusterEntry .1.3.6.1.4.1.334.72.1.1.6.4.7.1 |
lnClusterTableIndexA unique value for each entry in the lnClusterTable.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.7.1.1 |
lnClusterMemberNameName of Notes Cluster Member.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.4.7.1.2 |
lnClusterMemberIndexThe last known load information for a cluster member.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.6.4.7.1.3 |
lnOpenRedirects OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.6.4.8 |
lnClusterFailoverByPathSuccThe number of times this server was successfully able
to redirect a client to another cluster member after the
client was unable to open a database by pathname on
a cluster member.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.8.1 |
lnClusterFailoverByPathUnsuccThe number of times this server was unsuccessful at
redirecting a client to another cluster member after the
client was unable to open a database by pathname for
a cluster member.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.8.2 |
lnClusterFailoverSuccThe number of times this server was successfully
able to redirect a client to another cluster member
after the client was unable to open a database by
replica ID on a cluster member.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.8.3 |
lnClusterFailoverUnsuccThe number of times this server was unsuccessful at
redirecting a client to another cluster member after the
client was unable to open a database by replica ID on
a cluster member.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.8.4 |
lnClusterLoadBalByPathSuccThe number of times this server was successfully able to
redirect a client to another cluster member after the client
attempted to open a database by pathname on a cluster
member that was BUSY.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.8.5 |
lnClusterLoadBalByPathUnsuccThe number of times this server was unsuccessful at
redirecting a client to another cluster member after the
client attempted to open a database by pathname on a
cluster member that was BUSY.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.8.6 |
lnClusterLoadBalSuccThe number of times this server was successfully able to
redirect a client to another cluster member after the client
attempted to open a database by replica ID on a cluster
member that was BUSY.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.8.7 |
lnClusterLoadBalUnsuccThe number of times this server was unsuccessful at
redirecting a client to another cluster member after the
client attempted to open a database by replica ID on
a cluster member that was BUSY.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.8.8 |
lnOpenRequest OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.6.4.9 |
lnClusterOpenReqClustBusyThe number of times that a client attempted to open a
database on this cluster member when it and the rest
of the cluster were BUSY.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.9.1 |
lnClusterOpenReqDBOutofServThe number of times a client attempted to open a database
that has been marked as out of service on this cluster
member.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.9.2 |
lnClusterOpenReqLoadBalancedThe number of times a client attempted to open a database
on this cluster member when the cluster member was BUSY.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.9.3 |
lnClusterTrans OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.6.4.10 |
lnClusterTransIntAvgTimeAverage transaction time (in milliseconds) for this
member of the cluster. Based on transaction data
captured over a number of recent intervals of time.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.10.1 |
lnClusterTransIntInSecCurrent setting for the length of the intervals.
Used to capture transaction data for load balance
computations.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.10.2 |
lnClusterTransIntUsedInAvgCurrent setting of the number for intervals being
used to capture transaction data on load balance
computations.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.10.3 |
lnClusterTransLastIntAvgTimeAverage transaction time for the last interval of
transaction data captured on this cluster member.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.10.4 |
lnClusterTransNormValueThe current setting for the acceptable average
transaction time (in milliseconds) on this cluster
member.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.10.5 |
lnClusterProbeErrorThe number of times a server received an error while
probing another server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.6.4.11 |
lnComm OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.7 |
lnNumClosedOldSessionsNumber of sessions dropped because of too many
concurrent users.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.1 |
lnNetbiosTableA table containing one entry for each active NetBIOS
port on the server. Notes R3 only. SEQUENCE OF LnNetbiosEntry .1.3.6.1.4.1.334.72.1.1.7.2 |
lnNetbiosEntryThe entry type definition for the lnNetbiosTable, Notes R3 LnNetbiosEntry .1.3.6.1.4.1.334.72.1.1.7.2.1 |
lnNBIndexA unique value for each entry in lnNetbiosTable.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.1 |
lnNBPortNetBIOS port associated with this table entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.7.2.1.2 |
lnNBUnitNumberUnit number for this NetBIOS port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.3 |
lnNBMajVersionMajor version number of the NetBIOS driver being run on
this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.4 |
lnNMMinVersionMinor version number of the NetBIOS driver being run on
this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.5 |
lnNBReportPeriodPeriod of time over which the statistics for this port have
been accumulating.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.6 |
lnNBInUseSessionsNumber of NetBIOS sessions currently in use.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.7 |
lnNBMaxSessionsMaximum number of concurrent NetBIOS sessions
configured for this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.8 |
lnNBAvailCmdBlocksThe number of NetBIOS command blocks which are
currently available for use.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.9 |
lnNBTotalCmdBlocksMaximum number of NetBIOS command blocks
configured for this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.10 |
lnNBPacketSizePacket size for this NetBIOS port (in bytes).ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.11 |
lnNBReceivedPacketsTotal number of packets received by this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.12 |
lnNBSentPacketsTotal number of packets sent from this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.13 |
lnNBAbortedTransmissionsNumber of aborted transmissions for this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.14 |
lnNBRetriedTransmissionsNumber of retried transmissions for this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.15 |
lnNBAlignmentErrorsNumber of alignment errors for this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.16 |
lnNBCollisionErrorsNumber of collision errors for this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.17 |
lnNBCRCErrorsNumber of checksum errors for this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.2.1.18 |
lnXPCTableA table containing one entry for each active
XPC port on the server. SEQUENCE OF LnXPCEntry .1.3.6.1.4.1.334.72.1.1.7.3 |
lnXPCEntryThe entry type definition for the lnXPCTable. LnXPCEntry .1.3.6.1.4.1.334.72.1.1.7.3.1 |
lnXPCIndexA unique value for each entry in the lnXPCTable.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.3.1.1 |
lnXPCPortXPC port associated with this table entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.7.3.1.2 |
lnXPCStatusThe status of this XPC port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.7.3.1.3 |
lnXPCCarrierSpeedCommunication speed (in bits per second) between
local modem and remote modem.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.3.1.4 |
lnXPCPortSpeedCommunication speed (in bits per second) between
server and local modem.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.3.1.5 |
lnXPCActiveSessionsNumber of active user sessions on this XPC port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.3.1.6 |
lnXPCKiloBytesReceivedNumber of kilobytes received by this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.3.1.7 |
lnXPCKiloBytesSentNumber of kilobytes sent by this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.3.1.8 |
lnXPCMsgsReceivedNumber of messages received by this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.3.1.9 |
lnXPCMsgsSentNumber of messages sent by this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.3.1.10 |
lnXPCCRCErrorsNumber of checksum errors from this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.3.1.11 |
lnXPCPortErrorsNumber of port errors.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.3.1.12 |
lnXPCRetransmissionsNumber of retransmissions from this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.3.1.13 |
lnAppleTalkStatsLoggedNumber of AppleTalk statistics logged by the Notes server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.4 |
lnNetWareSPXIIStatsLoggedNumber of NetWare SPX II statistics logged by the Notes server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.5 |
lnNetPortTableA table containing one entry for each configured Notes network
port on the server. This table is new to the MIB as of Notes
Release 4. This table replaces most of the lnComm variables,
remaining for backward compatibility, found in Release 3 of Notes. SEQUENCE OF LnNetPortEntry .1.3.6.1.4.1.334.72.1.1.7.6 |
lnNetPortEntryThe entry type definition for the lnNetPortTable.
This is specific to Notes Release 4. LnNetPortEntry .1.3.6.1.4.1.334.72.1.1.7.6.1 |
lnNetPortIndexA unique value for each entry in lnPortTable.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.1 |
lnNetPortNameThe port name associate with this entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.7.6.1.2 |
lnNetPortKBytesRecTotal kilobytes received on this port.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.3 |
lnNetPortKBytesSentTotal kilobytes sent on this port.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.4 |
lnNetPortSessEstInThe number of inbound sessions established on this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.5 |
lnNetPortSessEstOutThe number of outbound sessions established on this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.6 |
lnNetPortSessLimitThe current limit on the number of concurrent sessions on the port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.7 |
lnNetPortSessLimitMaxUpward boundary of the range in which lnPortSessLimit may vary.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.8 |
lnNetPortSessLimitMinLower boundary of the range in which lnPortSessLimit may vary.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.9 |
lnNetPortSessPeakThe peak number of concurrent sessions on this port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.10 |
lnNetPortSessRecycledNumber of dropped sessions due to low network resources.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.11 |
lnNetPortSessRecyclingNumber of sessions currently being dropped due to low
network resources.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.12 |
lnSNARemoteLURemote LU.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.13 |
lnSNALocalLULocal LU.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.14 |
lnSNALNCVersionSNA LNC Version.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.15 |
lnSNAVersionSNA Version.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.16 |
lnSNAMaxSessionsMaximum number of SNA sessions that can exist.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.17 |
lnSNAActiveSessionsThe total number of active SNA sessions.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.18 |
lnSNATPTypeSNA transaction program type.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.19 |
lnSNATPStateSNA transaction program state.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.20 |
lnSNAConversationIdSNA conversation ID.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.21 |
lnSNAMaxSendRUSizeMaximum send request unit size sent.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.22 |
lnSNAMaxRcvRUSizeMaximum send request unit size received.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.23 |
lnSNASendPacingSizeThe maximum number of outstanding request units which can
be transmitted before receiving a pacing response from the
remote LU.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.24 |
lnSNARcvPacingSizeThe maximum number of oustanding request units which can
be received before transmitting a pacing response to the
remote LU.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.25 |
lnSNAPacingTypeThe SNA pacing size was originally determined at the creation
of a session and remained constant through the life of the
session. More recent implementations allow the pacing size
to dynamically change through the life of the session to increase
efficiency and take advantage of available buffers. This number
represents the type of pacing done.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.26 |
lnX25LocalResetsThe total number of local resets on this X25 port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.27 |
lnX25RemoteResetsThe total number of remote resets on this X25 port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.28 |
lnX25WindowSizeThe window size on this X25 port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.29 |
lnX25FrameSizeThe network frame size on this X25 port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.30 |
lnX25PktSizeThe network packet size on this X25 port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.31 |
lnX25UnderRunsThis occurs when data is not given to the UART on an X.25 board
fast enough for it to generate a complete packet on the wire.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.32 |
lnX25OverRunsThis occurs when data is given to the UART on an X.25 board
faster than the board can generate packets to put on the wire.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.33 |
lnX25REJTranThe total number of REJs transmitted by this X25 port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.34 |
lnX25REJRcvThe total number of REJs received by this X25 port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.35 |
lnX25VCCfgThe total number of virtual circuits configured on this X25 port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.36 |
lnX25VCInUseThe total number of virtual circuits currently in use on this X25 port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.37 |
lnX25CRCErrorsThe remote DTE address on this X25 port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.38 |
lnX25LocalDTEAddressThe local DTE address on this X25 port.ro INTEGER .1.3.6.1.4.1.334.72.1.1.7.6.1.39 |
lnDisk OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.8 |
lnDiskFixedNumber of fixed disks configured on this server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.8.1 |
lnDiskFreeSwapAmount of free space left in swap area (in kilobytes).ro INTEGER .1.3.6.1.4.1.334.72.1.1.8.2 |
lnDriveTableA table containing one entry for each disk (including
network disks) configured on the server. SEQUENCE OF LnDriveEntry .1.3.6.1.4.1.334.72.1.1.8.3 |
lnDriveEntryThe entry type definition for the lnDriveTable. LnDriveEntry .1.3.6.1.4.1.334.72.1.1.8.3.1 |
lnDriveIndexA unique value for each entry in lnDriveTable.ro INTEGER .1.3.6.1.4.1.334.72.1.1.8.3.1.1 |
lnDriveLetterThe drive letter of the disk associated with this entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.8.3.1.2 |
lnDriveSizeThe total size of this drive in kilobytes.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.8.3.1.3 |
lnDriveFreeThe amount of free space left on this drive in kilobytes.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.8.3.1.4 |
lnDiskRemoteThe number of network disks or volumes mounted.ro INTEGER .1.3.6.1.4.1.334.72.1.1.8.4 |
lnMem OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.9 |
lnMemAllocTotalTotal memory allocated (should be sum of
process and shared).ro INTEGER .1.3.6.1.4.1.334.72.1.1.9.1 |
lnMemAllocProcessTotal process-private memory allocated by all
currently-running processes.ro INTEGER .1.3.6.1.4.1.334.72.1.1.9.2 |
lnMemAllocSharedTotal shared memory allocated.ro INTEGER .1.3.6.1.4.1.334.72.1.1.9.3 |
lnMemAvailabilityAvailable memory on this server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.9.4 |
lnMemFreeTotal free memory, reported in kilobytes, as shown
in the MEM.FREE Notes statistic.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.9.5 |
lnMemSwapSizeSize of swap file (NOTE: this stat relies on the NOTES.INI
variable 'SWAPPATH' if config.sys contains a swap
path different from the default.)ro INTEGER .1.3.6.1.4.1.334.72.1.1.9.6 |
lnMemPhysicalRAMThe total amount of physical memory on the server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.9.7 |
lnDatabase OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.10 |
lnDBBufferControlPoolSizeSize of the buffer control pool.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.1 |
lnDBBufferControlPoolUsedNumber of bytes used in buffer control pool.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.2 |
lnDBBufferPoolAllocatedNumber of bytes allocated from the buffer pool.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.3 |
lnDBBufferPoolMaximumMaximum size of the buffer pool.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.4 |
lnDBBufferPoolUsedNumber of used buffers from the buffer pool.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.5 |
lnDBNSFPoolSizeSize of NSF pool.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.6 |
lnDBNSFPoolUsedAmount of space used in NSF pool.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.7 |
lnDBBufferPoolPercentReadsInBufferPercentage of buffer pool reads.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.8 |
lnDBBufferPoolReadsNumber of database buffer pool reads.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.9 |
lnDBBufferPoolWritesNumber of database buffer pool writes.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.10 |
lnDBNIFPoolSizeSize of database NIF pool.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.11 |
lnDBNIFPoolUsedNumber of database NIF pools.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.12 |
lnDBNIFPoolPeakThe peak number of database NIF pools.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.13 |
lnDBNSFPoolPeakThe peak number of database NSF pools.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.14 |
lnDBCacheCurrentEntriesThe number of databases currently in the cache. Administrators
should monitor this number to see whether it approaches the
NSF-DBCACHE-MAXENTRIES setting. If it does, this indicates
the cache is under pressure. If this situation
occurs frequently, the administrator should increase the setting for
NSF-DBCACHE-MAXENTRIES.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.15 |
lnDBCacheHighWaterMarkThe maximum number of databases in the cache during this
running of the Domino server program. Note that this number
may be artificially high due to startup activity, so it may
be of limited use as a genuine indicator of cache performance.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.16 |
lnDBCacheHitsThe number of times an lnDBCacheInitialDbOpen is satisfied by
finding a database in the cache. A high 'hits-to-opens' ratio
indicates the database cache is working effectively, since
most users are opening databases in the cache without having
to wait for the usual time required by an initial (non-cache)
open. If the ratio is low (in other words, more users are
having to wait for databases not in the cache to open), the
administrator can increase the NSF-DBCACHE-MAXENTRIES
settings.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.17 |
lnDBCacheInitialDbOpensThe number of times a user/server opened a database that was
not already being used by another user/server. By comparing
this number to lnDBCacheHits, administrators can gauge the
effectiveness of the cache.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.18 |
lnDBCacheLookupsThe number of lookups performed on the cache.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.19 |
lnDBCacheMaxEntriesThe number of databases that the server can currently
hold in its cache at once.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.20 |
lnDBCacheOvercrowdingRejectionsThe number of times a database is not placed into the
cache when it is closed because lnDBCacheCurrentEntries equals
or exceeds lnDBCacheMaxEntries*1.5. This number should stay
low. If it begins to rise, you should increase the
NSF-DbCache-Maxentries settings.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.21 |
lnDBBufferControlPoolPeakThe peak size of buffer control pool.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.10.22 |
lnAgentMgr OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.11 |
lnDailyAccessDenialsThe number of times the agent manager failed to execute
a given task, probably due to ACL restrictions.ro INTEGER .1.3.6.1.4.1.334.72.1.1.11.1 |
lnDailyScheduledRunsThe number of tasks that the agent manager has scheduled
to run during the course of the day.ro INTEGER .1.3.6.1.4.1.334.72.1.1.11.2 |
lnDailyTriggeredRunsThe number of tasks that the agent manager has had triggered
to run by an event during the course of the day.ro INTEGER .1.3.6.1.4.1.334.72.1.1.11.3 |
lnDailyUnsuccessfulRunsThe number of tasks the agent manager has unsuccessfully
run during the course of the day.ro INTEGER .1.3.6.1.4.1.334.72.1.1.11.4 |
lnDailyUsedRunTimeThe number of seconds used to run an agent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.11.5 |
lnHourlyAccessDenialsThe number of tasks that the agent manager failed to
execute during the last hour, probably due to ACL restrictions.ro INTEGER .1.3.6.1.4.1.334.72.1.1.11.6 |
lnHourlyScheduledRunsThe number of tasks the agent manager has scheduled to
run during the last hour.ro INTEGER .1.3.6.1.4.1.334.72.1.1.11.7 |
lnHourlyTriggeredRunsThe number of tasks the agent manager has had triggered to
run by an event during the last hour.ro INTEGER .1.3.6.1.4.1.334.72.1.1.11.8 |
lnHourlyUnsuccessfulRunsThe number of tasks the agent manager has unsuccessfully
run during the last hour.ro INTEGER .1.3.6.1.4.1.334.72.1.1.11.9 |
lnHourlyUsedRunTimeThe number of seconds to run an agent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.11.10 |
lnMTA OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.12 |
lnMTATableA table containing one entry for each running
Notes server MTA. SEQUENCE OF LnMTAEntry .1.3.6.1.4.1.334.72.1.1.12.1 |
lnMTAEntryThe entry type definition for the lnMTATable. LnMTAEntry .1.3.6.1.4.1.334.72.1.1.12.1.1 |
lnMTAIndexA unique value for each MTA running on the Notes server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.12.1.1.1 |
lnMTANameA string representing the name of a MTA running on
the Notes server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.12.1.1.2 |
lnMTADeadMsgsThe number of dead mail messages. (Messages that are stuck
in the MTA queue.)ro INTEGER .1.3.6.1.4.1.334.72.1.1.12.1.1.3 |
lnMTAWaitingRecpThe number of recipients for pending mail. (The number of
recipients responsible for lnMTAWaitingMsgs.)ro INTEGER .1.3.6.1.4.1.334.72.1.1.12.1.1.4 |
lnMTAWaitingMsgsThe amount of mail awaiting routing. (The number of messages
that are in the process of being routed.)ro INTEGER .1.3.6.1.4.1.334.72.1.1.12.1.1.5 |
lnMTATransferFailuresThe number of messages the MTA could not transfer.ro INTEGER .1.3.6.1.4.1.334.72.1.1.12.1.1.6 |
lnMTATotalKBTransferredThe total number of kilobyte transferred outbound
or into any of the .box's by this MTA.ro INTEGER .1.3.6.1.4.1.334.72.1.1.12.1.1.7 |
lnMTATransferredMsgsThe total number of messages transferred outbound or
into any of the .box's by this MTA.ro INTEGER .1.3.6.1.4.1.334.72.1.1.12.1.1.8 |
lnMTATotalRoutedThe total amount of mail routed (# of recipients routed to)
outbound or into any of the .box's.ro INTEGER .1.3.6.1.4.1.334.72.1.1.12.1.1.9 |
lnWeb OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.13 |
lnWebAccessFtpThe number of FTP connections on this Web server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.1 |
lnWebAccessGopherThe number of Gopher connections on this Web server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.2 |
lnWebAccessHttpThe number of HTTP connections on this Web server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.3 |
lnWebKBytesReceivedTotal kilobytes received by this Web server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.4 |
lnWebKBytesSentTotal kilobytes sent by this Web server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.5 |
lnWebImageCacheHitsThe number of successful hits on the image cache.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.6 |
lnWebImageCacheMissesThe number of image cache misses.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.7 |
lnWebLogMessages'Yes' if message logging is turned on.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.13.8 |
lnWebActiveProcessesThe number of active Web Retriever processes.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.9 |
lnWebBusyProcessesThe number of Web Retriever processes currently busy working.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.10 |
lnWebIdleProcessesThe number of Web Retriever processes that are sitting idle.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.11 |
lnWebMaxProcessesThe maximum number of Web Retriever processes allowable on this server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.12 |
lnWebProcessStateThe number of image cache misses.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.13.13 |
lnWebTimeCurrentThe current time, as set on this Web Retriever.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.13.14 |
lnWebTimeDurationShows the amount of time this Web Retriever has been running.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.13.15 |
lnWebTimeStartThe time the Web Retriever processes started.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.13.16 |
lnWebUrlFailThe number URL requests that have failed on this Web Retriever.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.17 |
lnWebUrlRequestedThe total number of URL requests on this Web Retriever.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.18 |
lnWebUrlSucceededThe number of URL requests successfully completed on this server.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.19 |
lnWebRetrieverVersionThe version of the Web Retriever software that is running.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.13.20 |
lnWebVpoolMaxBufThe number of buffer VPOOLs which have reached maximum size.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.21 |
lnWebVpoolMaxElementThe number of element VPOOLs which have reached maximum size.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.22 |
lnWebVpoolMaxMarkerThe number of marker VPOOLs which have reached maximum size.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.23 |
lnWebVpoolMaxTextThe number of text VPOOLs which have reached maximum size.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.24 |
lnWebVpoolMaxUrlThe number of URL VPOOLs which have reached maximum size.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.25 |
lnWebProcessTableThis table will show statistics for all Web Retriever
processes on the server. SEQUENCE OF LnWebProcEntry .1.3.6.1.4.1.334.72.1.1.13.26 |
lnWebProcEntryThis defines the MIB variables specific to each Web Retriever process. LnWebProcEntry .1.3.6.1.4.1.334.72.1.1.13.26.1 |
lnWebProcIndexA unique index entry for each Web Retriever process.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.1 |
lnWebProcNumberThe number associated with the Web Retriever process in
the Notes stats structure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.13.26.1.2 |
lnWebProcAccFtpThe number of FTP connections this Web Retriever process is handling.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.3 |
lnWebProcAccGopherThe number of Gopher connections this Web Retriever
process is handling.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.4 |
lnWebProcAccHttpThe number of HTTP connections this Web Retriever
process is handling.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.5 |
lnWebProcKBytesRecThe total number of kilobytes this Web Retriever process has received.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.6 |
lnWebProcKBytesSentThe total number of kilobytes this Web Retriever process has sent.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.7 |
lnWebProcCacheHitsThe total number of successful image cache hits for
this Web Retriever.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.8 |
lnWebProcCacheMissesThe total number of image cache misses for
this Web Retriever.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.9 |
lnWebProcPidThe process ID associated with this Web Retriever process.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.10 |
lnWebProcUrlFailThe number of URL opens that failed for this Web Retriever process.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.11 |
lnWebProcUrlReqThe number of URL open requests this Web Retriever process handled.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.12 |
lnWebProcUrlSuccThe number of successful URL opens this Web Retriever process handled.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.13 |
lnWebProcVpoolCurBufThe number of buffer VPOOLs currently allocated for this Web Retriever process.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.14 |
lnWebProcVpoolCurElementThe number of element VPOOLs currently allocated for this Web Retriever process.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.15 |
lnWebProcVpoolCurMarkerThe number of marker VPOOLs currently allocated for this Web Retriever process.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.16 |
lnWebProcVpoolCurTextThe number of text VPOOLs currently allocated for this Web Retriever process.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.17 |
lnWebProcVpoolCurUrlThe number of URL VPOOLs currently allocated for this Web Retriever process.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.18 |
lnWebProcVpoolMaxBufThe number of buffer VPOOLs allocated for this Web Retriever process
that have reached their maximum size.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.19 |
lnWebProcVpoolMaxElementThe number of element VPOOLs allocated to this Web Retriever process
that have reached their maximum size.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.20 |
lnWebProcVpoolMaxMarkerThe number of VPOOLs allocated to this Web Retriever process
that have reached their maximum size.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.21 |
lnWebProcVpoolMaxTextThe number of text VPOOLs allocated to this Web Retriever process
that have reached their maximum size.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.22 |
lnWebProcVpoolMaxUrlThe number of URL VPOOLs allocated to this Web Retriever process
that have reached their maximum size.ro INTEGER .1.3.6.1.4.1.334.72.1.1.13.26.1.23 |
lnObject OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.14 |
lnObjectFileNameThe name of the primary single-copy object store (SCOS) database
currently in use.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.14.1 |
lnObjectTableThis table describes statistics for the single-copy object store
of each SCOS database that is currently being accessed. SEQUENCE OF LnObjectEntry .1.3.6.1.4.1.334.72.1.1.14.2 |
lnObjectEntryAll items in LnObjectTable. LnObjectEntry .1.3.6.1.4.1.334.72.1.1.14.2.1 |
lnObjectIndexAn internal index for each SCOS database in use.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.1 |
lnObjectNameThe name of the single copy object store database.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.14.2.1.2 |
lnObjectSharedBy01Messages with 1 pointer.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.3 |
lnObjectSharedBy02Messages with 2 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.4 |
lnObjectSharedBy03Messages with 3 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.5 |
lnObjectSharedBy04Messages with 4 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.6 |
lnObjectSharedBy05Messages with 5 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.7 |
lnObjectSharedBy06Messages with 6 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.8 |
lnObjectSharedBy07Messages with 7 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.9 |
lnObjectSharedBy08Messages with 8 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.10 |
lnObjectSharedBy09Messages with 9 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.11 |
lnObjectSharedBy10Messages with 10 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.12 |
lnObjectSharedBy11Messages with 11 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.13 |
lnObjectSharedBy12Messages with 12 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.14 |
lnObjectSharedBy13Messages with 13 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.15 |
lnObjectSharedBy14Messages with 14 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.16 |
lnObjectSharedBy15Messages with 15 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.17 |
lnObjectSharedBy16Messages with 16 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.18 |
lnObjectSharedBy17Messages with 17 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.19 |
lnObjectSharedBy18Messages with 18 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.20 |
lnObjectSharedBy19Messages with 19 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.21 |
lnObjectSharedBy20Messages with 20 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.22 |
lnObjectSharedByGreaterMessages with more than 20 pointers.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.23 |
lnObjectSharedByTotalThe total number of shared messages.ro INTEGER .1.3.6.1.4.1.334.72.1.1.14.2.1.24 |
lnDomino OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.15 |
lnDominoInfo OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.15.1 |
lnDominoBuildNameThe name given to the build.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.1.1 |
lnDominoBuildNumberThe build number given to the build.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.1.2 |
lnDominoBuildPlatformThe platform this build was created on.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.1.3 |
lnDominoBuildVersionThe version string associated with this build.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.1.4 |
lnDominoThreadsActivePeakThe peak number of active threads since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.5 |
lnDominoThreadsTotalThe total number of available threads to service Domino requests.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.6 |
lnDominoThreadsPeakTotalThe total peak number of active threads since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.7 |
lnDominoThreadsPeakTimeThe time when the peak number of threads to service Domino requests
occured, represented as the number of seconds since midnight
1/1/70 GMT (UNIX epoch).ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.8 |
lnDominoStartTimeThe time and date the Domino server was started, represented as the
number of seconds since midnight 1/1/70 GMT (UNIX epoch).ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.9 |
lnDominoReqPerMinTotalThe total number of Domino requests in the last minute.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.10 |
lnDominoReqPerMinPeakThe highest number of Domino requests to occur during
a one minute interval.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.11 |
lnDominoReqPerMinPeakTimeThe time that the peak number of Domino requests occured during
a one minute interval, represented as the number of seconds since
midnight 1/1/70 GMT (UNIX epoch).ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.12 |
lnDominoReqPer5MinsTotalThe total number of Domino requests in the last five minutes.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.13 |
lnDominoReqPer5MinsPeakThe highest number of Domino requests to occur during a
five minute interval.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.14 |
lnDominoReqPer5MinsPeakTimeThe time that the peak number of Domino requets occured during
a five minute interval, represented as the number of seconds since
midnight 1/1/70 GMT (UNIX epoch).ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.15 |
lnDominoReqPerHourTotalThe total number of Domino requetss in the last hour.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.16 |
lnDominoReqPerHourPeakThe highest number of Domino requests to occur during a 1 hour interval.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.17 |
lnDominoReqPerHourPeakTimeThe time that the peak number of Domino requests occured during a
one hour interval, represented as the number of seconds since
midnight 1/1/70 GMT (UNIX epoch).ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.18 |
lnDominoReqPerDayTotalThe total number of Domino requestes in the last day.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.19 |
lnDominoReqPerDayPeakThe highest number of Domino requests to occur during a one day interval.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.20 |
lnDominoReqPerDayPeakTimeThe time that the peak number of Domino requests occured during
a one day interval, represented as the number of seconds since
midnight 1/1/70 GMT (UNIX epoch).ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.21 |
lnDominoRequestsTotalThe total number of Domino requests since the Domino server
was started. A value of zero may indicate the statistic's value is
too large to be passed via SNMP.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.22 |
lnDominoCacheCommandDisplaceRateCommand cache displace rate.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.23 |
lnDominoCacheCommandHitRateDomino command cache hit rate.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.24 |
lnDominoCacheDatabaseDisplaceRateDomino database cache displace rate.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.25 |
lnDominoCacheDatabaseHitRateDomino database cache hit rate.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.1.26 |
lnDominoCmdInfo OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.15.2 |
lnDominoCmdInfoEditDocumentThe number of EditDocument commands requested since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.1 |
lnDominoCmdInfoOpenServerThe number of OpenServer commands requested since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.2 |
lnDominoCmdInfoOpenDatabaseThe number of OpenDatabase commands requested since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.3 |
lnDominoCmdInfoOpenViewThe number of OpenView commands requested since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.4 |
lnDominoCmdInfoOpenDocumentThe number of OpenDocument commands requested since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.5 |
lnDominoCmdInfoOpenElementThe number of OpenElement commands requested since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.6 |
lnDominoCmdInfoOpenIconThe number of OpenIcon commands requested since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.7 |
lnDominoCmdInfoOpenFormThe number of OpenForm commands requested since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.8 |
lnDominoCmdInfoOpenAgentThe number of OpenAgent commands requested since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.9 |
lnDominoCmdInfoOpenNavigatorThe number of OpenNavigator commands requested since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.10 |
lnDominoCmdInfoOpenAboutThe number of OpenAbout commands requested since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.11 |
lnDominoCmdInfoOpenHelpThe number of OpenHelp commands requested since the Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.12 |
lnDominoCmdInfoCreateDocumentThe number of CreateDocument commands requested since the Domino server
was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.13 |
lnDominoCmdInfoSaveDocumentThe number of SaveDocument commands requested since the
Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.14 |
lnDominoCmdInfoDeleteDocumentThe number of DeleteDocument commands requested since the
Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.15 |
lnDominoCmdInfoSearchSiteThe number of SearchSite commands requested since the
Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.16 |
lnDominoCmdInfoSearchViewThe number of SearchView commands requested since the
Domino server was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.17 |
lnDominoCmdInfoUnknownThe number of unrecognized Domino commands.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.18 |
lnDominoCmdInfoLoginThe number of Login commands requested since the Domino server
was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.19 |
lnDominoCmdInfoNavigateThe number of Navigate commands requested since the Domino server
was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.20 |
lnDominoCmdInfoReadFormThe number of Read Form commands requested since the Domino server
was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.21 |
lnDominoCmdInfoTotalThe total number of commands performed since the Domino server
was started.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.2.22 |
lnDominoConfig OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.15.3 |
lnDominoCfgPortNumberThe TCP/IP port number from the server record.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.3.1 |
lnDominoCfgPortStatusThe TCP/IP port status (enabled or disabled).ro Enumeration .1.3.6.1.4.1.334.72.1.1.15.3.2 |
lnDominoCfgHostNameThe HostName of the Domino server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.3 |
lnDominoCfgDNSLookupThe status of DNS lookup (enabled or disabled).ro Enumeration .1.3.6.1.4.1.334.72.1.1.15.3.4 |
lnDominoCfgHomeURLThe URL that requests are directed to if only the server name is specified.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.5 |
lnDominoCfgWelcomePageThe page name to direct to if no explicit page name is
specified in the URL.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.6 |
lnDominoCfgActiveThreadsMaxThe maximum number of active threads servicing HTTP requests.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.3.7 |
lnDominoCfgActiveThreadsMinThe minimum number of active threads servicing HTTP requests.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.3.8 |
lnDominoCfgSSLPortNumberThe TCP/IP port number for HTTP requests using SLL.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.3.9 |
lnDominoCfgSSLStatusThe SSL status (enabled or disabled).ro Enumeration .1.3.6.1.4.1.334.72.1.1.15.3.10 |
lnDominoCfgSSLKeyFileThe file name for SSL keys.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.11 |
lnDominoCfgCacheDirectoryThe directory for the Domino cache.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.12 |
lnDominoCfgCacheSizeMaxThe maximum size of the Domino cache in MB.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.3.13 |
lnDominoCfgCacheDeleteDelete Domino cache on shutdown (enabled or disabled).ro Enumeration .1.3.6.1.4.1.334.72.1.1.15.3.14 |
lnDominoCfgGarbageCollectionStatusStatus of garbage collection (enabled or disabled).ro Enumeration .1.3.6.1.4.1.334.72.1.1.15.3.15 |
lnDominoCfgGarbageCollectionIntervalThe interval between garbage collections in minutes.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.3.16 |
lnDominoCfgImageFormatGraphics conversion image format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.17 |
lnDominoCfgImageInterlacedGraphics interlacing (enabled or disabled).ro Enumeration .1.3.6.1.4.1.334.72.1.1.15.3.18 |
lnDominoCfgViewLinesThe number of lines per view segment.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.3.19 |
lnDominoCfgDirectoryHTMLThe location of the HTML directory setting.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.20 |
lnDominoCfgDirectoryURLPathCGIThe CGI URL path.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.21 |
lnDominoCfgDirectoryCGIThe location of the CGI directory setting.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.22 |
lnDominoCfgDirectoryURLPathIconsThe Domino icons URL path.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.23 |
lnDominoCfgDirectoryIconsThe location of the Domino icons directory setting.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.24 |
lnDominoCfgLogAccessThe filename for Domino access logs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.25 |
lnDominoCfgLogErrorThe filename for Domino error logs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.26 |
lnDominoCfgLogTimeStampThe Domino timestamp format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.27 |
lnDominoCfgLogFilterThe Domino log filter setting.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.15.3.28 |
lnDominoCfgTimeoutIdleThreadThe interval (in minutes) before idle threads timeout.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.3.29 |
lnDominoCfgTimeoutInputThe interval (in minutes) before timeout expires while waiting for input.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.3.30 |
lnDominoCfgTimeoutOutputThe interval (in minutes) before timeout expires while waiting for output.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.3.31 |
lnDominoCfgTimeoutCGIThe interval (in minutes) before CGI timeout expires while waiting for input.ro INTEGER .1.3.6.1.4.1.334.72.1.1.15.3.32 |
lnCalendar OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.16 |
lnCalTotalAllApptsResourcesThe total number of scheduled appointment and resource reservations.ro INTEGER .1.3.6.1.4.1.334.72.1.1.16.1 |
lnCalTotalAllUsersResourcesThe total number of resources that have been reserved, plus
the number of users with scheduled appointments.ro INTEGER .1.3.6.1.4.1.334.72.1.1.16.2 |
lnCalTotalAppointmentsThe total number of scheduled appointments.ro INTEGER .1.3.6.1.4.1.334.72.1.1.16.3 |
lnCalTotalReservationsThe total number of reservations for resources.ro INTEGER .1.3.6.1.4.1.334.72.1.1.16.4 |
lnCalTotalResourcesThe total number of resources that have been reserved.ro INTEGER .1.3.6.1.4.1.334.72.1.1.16.5 |
lnCalTotalUsersThe total number of users that have scheduled appointments.ro INTEGER .1.3.6.1.4.1.334.72.1.1.16.6 |
lnCollector OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.1.1.17 |
lnCollectorTimeCollectedTime and date at which the statistics collector task last
collected statistics; represented as the number of seconds
since midnight 1/1/70 GMT (UNIX epoch).ro INTEGER .1.3.6.1.4.1.334.72.1.1.17.1 |
lnCollectorTimeElapsedThe time that has elapsed since the statistics collector
task was started.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.1.17.2 |
lnMIBVersionDomino SNMP support level (MIB Version).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.3 |
lnQSBuildNumberThe build number of the Query/Set Notes add-in task.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.1.5 |
lnControl OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.2 |
lnNotesServerSetStateSet to 'down' to shut Notes server down, set to 'up' to
restart Notes server. Note: access to this feature is
controlled through external (non-SNMP) security measures.rw Enumeration .1.3.6.1.4.1.334.72.2.1 |
lnNotesServerStateEquals 'down' if the Notes server is down, equals 'up'
if the Notes server is running.ro Enumeration .1.3.6.1.4.1.334.72.2.2 |
lnLastTrapSeqSequence number of last trap sent. Same as the
index number that trap in the lnRecentTrapsTable.ro INTEGER .1.3.6.1.4.1.334.72.2.3 |
lnRecentTrapsTableA table containing the last 10 generated traps. SEQUENCE OF LnRecentTrapsEntry .1.3.6.1.4.1.334.72.2.4 |
lnRecentTrapsEntryThe entry type definition for the lnRecentTrapsTable. LnRecentTrapsEntry .1.3.6.1.4.1.334.72.2.4.1 |
lnTrapSeqA unique value for each trap record in
the sequence of entries returned to the
lnRecentTrapsTable.ro INTEGER .1.3.6.1.4.1.334.72.2.4.1.1 |
lnTrapInfoA string containing the information for a trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.2.4.1.2 |
lnRemoteRebootSet to 'yes' to reboot the entire system.
This value will be returned as 'yes' if the system is in
the process of rebooting but hasn't come down yetrw Enumeration .1.3.6.1.4.1.334.72.2.5 |
lnServerTblA table containing the list of Domino Servers that have been
partitioned across this machine. This must be configured by the
system administrator. This table only reflects the Domino Servers
that are listed in the file lnsnmp.ini since there is no way to
query a given machine for a list of potentially available servers. SEQUENCE OF LnRecentTrapsEntry .1.3.6.1.4.1.334.72.2.6 |
lnServerTblEntryThe entry type definition for the lnServerTbl. LnRecentTrapsEntry .1.3.6.1.4.1.334.72.2.6.1 |
lnServerTblIndexThe MIB index for this row in the lnServerTbl.ro INTEGER .1.3.6.1.4.1.334.72.2.6.1.1 |
lnServerTblNameThe name of the server as it appears in lnsnmp.ini.
However, if a server's addin task registers with the Main Proxy Agent,
The addin task will update the server's name with the correct name
if a match can be found.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.2.6.1.2 |
lnServerTblNotesPartitionThe value that is entered in lnsnmp.ini.
This MUST match the environment variable NOTESPARTITION for
Domino Servers partitioned on Windows-NT Systems. This
has no real meaning for Domino Servers on UNIX platforms.ro INTEGER .1.3.6.1.4.1.334.72.2.6.1.3 |
lnServerTblDataDirThe data directory of the given Domino server as entered
in lnsnmp.ini; See lnServerTblDataDirValid for an indication on
whether or not this is a valid Domino Server data directory.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.2.6.1.4 |
lnServerTblDataDirValidThe Main Proxy Agent validates the Domino Server data directory
that is entered in lnsnmp.ini. This will be TRUE if this is a valid
directory and the file notes.ini exists within that directory.
It will be false otherwise.ro Enumeration .1.3.6.1.4.1.334.72.2.6.1.5 |
lnServerTblStateThis will indicate the current state of the server. The server will
be considered down until at least one of the Domino Management Agent
tasks starts and registers with the Main Proxy Agent.ro Enumeration .1.3.6.1.4.1.334.72.2.6.1.6 |
lnServerIdentifiedItselfThis will indicate if the server has ever run and identified
itself to the Main Proxy Agent at any time during the current
lifespan of the Main Proxy Agent. This may be used as an
indication that a given Domino server may not be configured
correctly in lnsnmp.ini. The server identification occurs when
one of the Domino Management Agent addin tasks is started.ro Enumeration .1.3.6.1.4.1.334.72.2.6.1.7 |
lnServerTblSetStateThis will indicate the current state of the Domino server and
allow remote SNMP control over stopping & starting the Domion
server. The server will be considered down until at least one
of the Domino management Agent addin tasks starts and registers
with the Main Proxy Agent.rw Enumeration .1.3.6.1.4.1.334.72.2.6.1.8 |
lnTotalPartitionsIf the file lnsnmp.ini exists, this MIB variable will represent
the number of 'Server=' entries in that file. If the file lnsnmp.ini
does not exist, the value of lnTotalPartitions will equal zero.ro INTEGER .1.3.6.1.4.1.334.72.2.7 |
lnMPAIniFileLocationThe directory that the file lnsnmp.ini was read from.
Normally this is either the Windows-NT directory or this will
be /opt/lotus for UNIX systems. However, on either platform, if
the file is not found, the PATH environment variable will be
searched. The first instance of lnsnmp.ini in the PATH will
be opened.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.2.8 |
lnInterceptor OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.3 |
lnEvtServerOriginating server for this event.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.3.1 |
lnEvtTypeReturns a value for the type of this event.ro Enumeration .1.3.6.1.4.1.334.72.3.2 |
lnEvtSeverityReturns a value for the severity of this event.ro Enumeration .1.3.6.1.4.1.334.72.3.3 |
lnEvtWhenReturns a value for the date and time of this event.ro INTEGER .1.3.6.1.4.1.334.72.3.4 |
lnEvtDataInformation about this event.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.3.5 |
lnEvtSeqSequence number of this event for internal
use only. This information is not available in
this MIB variable. If you wish to determine the
sequence number for the last trap, please see
the variable lnControl.lnRecentTrapsTable.lnRecentTrapEntry.lnTrapSeq.ro INTEGER .1.3.6.1.4.1.334.72.3.6 |
lnUnix OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.4 |
lnAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.4.1 |
lnAlarmServerHandleThis represents the server for which the alarm will be generated for. INTEGER .1.3.6.1.4.1.334.72.4.1.1 |
lnAlarmTargetHandleThis represents the entity on the server that caused the alarm
to be generated INTEGER .1.3.6.1.4.1.334.72.4.1.2 |
lnAlarmDateThe date the alarm occured. INTEGER .1.3.6.1.4.1.334.72.4.1.3 |
lnAlarmTimeThe time the alarm occured. INTEGER .1.3.6.1.4.1.334.72.4.1.4 |
lnAlarmSeverityThe severity of the alarm being generated by the SNMP trap Enumeration .1.3.6.1.4.1.334.72.4.1.5 |
lnAlarmIntArgReturns a value for the integer argument associated with the Alarm. INTEGER .1.3.6.1.4.1.334.72.4.1.6 |
lnAlarmLongArgThe long integer argument associated with the Alarm. INTEGER .1.3.6.1.4.1.334.72.4.1.7 |
lnAlarmDoubleArgThe string representation of a floating point value. OCTET STRING .1.3.6.1.4.1.334.72.4.1.8 |
lnAlarmTextArg1The first text argument associated with the Alarm. OCTET STRING .1.3.6.1.4.1.334.72.4.1.9 |
lnAlarmTextArg2The second text argument associated with the Alarm. OCTET STRING .1.3.6.1.4.1.334.72.4.1.10 |
lnAlarmSeverityStrA string representation of the alarm severity. This is
used in the trap that is sent to the management station to
be displayed on the NetView event cards. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.4.1.11 |
lnAlarmTypeStrA string representation of the alarm's type. This is
used in the trap that is sent to the management station to
be displayed on the NetView event cards. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.4.1.12 |
lnAlarmMessageA message indicating why the alarm was raised. This is
used in the trap that is sent to the management station to
be displayed on the NetView event cards. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.4.1.13 |
lnAlarmMessageExtA message extension with more detailed information explaining
why the alarm was raised. This is used in the trap that is sent
to the management station to be displayed on the NetView event
cards. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.4.1.14 |
lnAlarmServerNameThe server name of the Notes server the alarm was raised
against. This is used in the trap that is sent to the management
station to be displayed in the NetView event cards. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.4.1.15 |
lnSignal OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.4.2 |
lnSignalServerIdThis variable will be embedded in the lnSignalServerConfigChg trap.
This is an integer that represents the ServerId of the
Notes server that caused the signal to be raised. INTEGER .1.3.6.1.4.1.334.72.4.2.1 |
lnSignalOldServerTypeThis variable will be embedded in the lnSignalServerConfigChg trap.
This is an the integer value representing the old server class. INTEGER .1.3.6.1.4.1.334.72.4.2.2 |
lnSignalNewServerTypeThis variable will be embedded in the lnSignalServerConfigChg trap.
This is an integer value representing the new server class. INTEGER .1.3.6.1.4.1.334.72.4.2.3 |
lnSignalWhatHasChangedThis variable will be embedded in the lnSignalServerConfigChg trap.
This is an integer value indicating what has changed on
the server. INTEGER .1.3.6.1.4.1.334.72.4.2.4 |
lnSignalServerNameThe server name. This will appear in the information trap
displayed in the NetView Event Cards when a specific server has
had all its alarms cleared. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.4.2.5 |
mapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.334.72.100 |
lnMainProxyAgentVersionInformation relevant to the Lotus Main SNMP Proxy Agentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.334.72.100.1 |
notesPump OBJECT IDENTIFIER .1.3.6.1.4.1.334.73 |