Home/Catalog/NIS-3500-2208PCE

NIS-3500-2208PCE

The MIB module is for Industrial Ethernet Switch and compatible to firmware kernel version 2.46 or higher.
Main OID:
contact.1.3.6.1.4.1.25972.0.5.20.0
406
Objects
Active
Status
1
Dependencies

Imported Objects

SNMPv2-SMI

Objects

406 total
Object Name
private
OBJECT IDENTIFIER
.1.3.6.1.4
enterprises
OBJECT IDENTIFIER
.1.3.6.1.4.1
company
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972
switches
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0
managedPoeSwitch
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5
nis_3500_2208pce
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20
contactThe MIB module is for Industrial Ethernet Switch and compatible to firmware kernel version 2.46 or higher.
MODULE-IDENTITY
.1.3.6.1.4.1.25972.0.5.20.0
systemInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.1
systemNameAn administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.1.1
systemLocationThe physical location of this node (e.g., `telephone closet, 3rd floor').ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.1.2
systemContactThe contact information of system.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.1.3
systemDescrA textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.1.4
systemFwVerFirmware version of the device.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.1.5
systemMacAddressThe MAC address of switch.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.25972.0.5.20.1.6
basicSetting
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.2
switchSetting
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.2.1
switchSettingSystemNameAn administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.2.1.1
switchSettingSystemLocationThe physical location of this node (e.g., `telephone closet, 3rd floor').rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.2.1.2
switchSettingSystemContactThe contact information of system.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.2.1.3
switchSettingLocationAlertThe location alert function.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.2.1.4
adminPassword
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.2.2
adminPasswordUserNameThe name(ID) of security manager.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.2.2.1
adminPassword_PasswordThe password of security manager. This object can't be read. it's write-only.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.25972.0.5.20.2.2.2
ipConfiguration
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.2.3
ipConfigurationTableTable of descriptive information and configuration about IP of switche.
SEQUENCE OF IPconfigurationEntry
.1.3.6.1.4.1.25972.0.5.20.2.3.1
ipConfigurationEntryAn entry in the table, containing IP/DHCP-client information of the switch.
IPconfigurationEntry
.1.3.6.1.4.1.25972.0.5.20.2.3.1.1
ipConfigurationIndexThis object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
Integer32
.1.3.6.1.4.1.25972.0.5.20.2.3.1.1.1
ipConfigurationDHCPStatusParameter to enable or disable DHCP client function of the switch. When enabled, device will be a DHCP client and request the IP configuration from DHCP server. Note: Other items in this table couldn't be modified, when ipConfigurationDHCPStatus is enabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.2.3.1.1.2
ipConfigurationAddressThe IP address of switch.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.2.3.1.1.3
ipConfigurationSubMaskThe subnet mask of switch.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.2.3.1.1.4
ipConfigurationGatewayThe gateway address of switch.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.2.3.1.1.5
ipConfigurationDNS1The DNS1 address of switch.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.2.3.1.1.6
ipConfigurationDNS2The DNS2 address of switch.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.2.3.1.1.7
sntp
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.2.4
sntpClientStatus(1)Enable SNTP clinet. (2)Disable SNTP clinet. SNTP is simple network time protocol. Use this OID to Enable/Disable SNTP client.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.2.4.1
sntpDaylightSavingTime(1)Enable Daylight Saving Time. (2)Disable Daylight Saving Time. Daylight Saving Time: Use this OID to Enable/Disable Daylight Saving Time.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.2.4.2
sntpUTCTimezoneUTC Timezone.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.2.4.3
sntpServerAddressThe address of a SNTP Server.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.2.4.4
sntpSwitchTimerThe switch timer.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.2.4.5
sntpDaylightSavingPeriodStartThe start-time of daylight saveing period, format: yyyymmdd hh:mm.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.2.4.6
sntpDaylightSavingPeriodEndThe end-time of daylight saveing period, format: yyyymmdd hh:mm.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.2.4.7
sntpDaylightSavingOffsetDaylight Saving Offset(Usually is 60 mins). When Enable and current time at Daylight Saving Period, the current time of the switch will be offseted by Daylight Saving Offset.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.2.4.8
lldp
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.2.5
lldpStatusLLDP Configuration. (1) Enable. (2) Disable.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.2.5.1
lldpIntervalLLDP Interval.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.2.5.2
autoProvision
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.2.6
autoProvisionConfigurationStatusAuto Provision for Switch Configuration. (1) Enable. (2) Disable.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.2.6.1
autoProvisionConfigurationServeripThe IP address of TFTP server.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.2.6.2
autoProvisionConfigurationFilenameThe filename of firmware.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.2.6.3
autoProvisionImageStatusAuto Provision for firmware image. (1) Enable. (2) Disable.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.2.6.4
autoProvisionImageServeripThe IP address of TFTP server.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.2.6.5
autoProvisionImageFilenameThe filename of firmware.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.2.6.6
backupAndRestore
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.2.7
backupServerIPThe IP address of a TFTP server from which a firmware image can be uploaded.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.2.7.1
backupAgentBoardFwFileNamerw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.2.7.2
backupStatusSetting this object to active(1) triger the TFTP upload action. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.2.7.3
restoreServerIPThe IP address of a TFTP server from which a firmware image can be downloaded.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.2.7.4
restoreAgentBoardFwFileNamerw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.2.7.5
restoreStatusSetting this object to active(1) triger the TFTP download action. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.2.7.6
upgradeFirmware
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.2.8
tftpDownloadServerIPThe IP address of a TFTP server from which a firmware image can be downloaded.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.2.8.1
tftpDownloadAgentBoardFwFileNamerw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.2.8.2
tftpDownloadStatusSetting this object to active(1) triger the TFTP download action. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.2.8.3
dhcpServer
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.3
dhcpServerCfgTableTable of descriptive information and configuration about DHCP server of the switch.
SEQUENCE OF DHCPServerCfgEntry
.1.3.6.1.4.1.25972.0.5.20.3.1
dhcpServerCfgEntryAn entry in the table, containing DHCP server information of the switch.
DHCPServerCfgEntry
.1.3.6.1.4.1.25972.0.5.20.3.1.1
dhcpServerCfgIndexThis object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
Integer32
.1.3.6.1.4.1.25972.0.5.20.3.1.1.1
dhcpServerCfgStatusParameter to enable or disable DHCP server function of the switch. When enabled, the device will be a DHCP server and provide the IP configurations for other DHCP clients. Note: Other items in this table couldn't be modified, when dhcpServerCfgStatus is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.3.1.1.2
dhcpServerCfgLowIPAddrThis object defines the low boundary of DHCP server IP pool.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.3.1.1.3
dhcpServerCfgHighIPAddrThis object defines the high boundary of DHCP server IP pool.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.3.1.1.4
dhcpServerCfgSubMaskThe subnet mask of IP configuration for DHCP clients.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.3.1.1.5
dhcpServerCfgGatewayThe gateway address of IP configuration for DHCP clients.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.3.1.1.6
dhcpServerCfgDNSThe DNS address of IP configuration for DHCP clients.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.3.1.1.7
dhcpServerCfgLeaseTimeThe lease time(in second) of DHCP clients.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.3.1.1.8
dhcpServerClientInfoTableTable of descriptive information about current status of each DHCP client registered.
SEQUENCE OF DHCPServerClientInfoEntry
.1.3.6.1.4.1.25972.0.5.20.3.2
dhcpServerClientInfoEntryAn entry in the table, containing DHCP clients information.
DHCPServerClientInfoEntry
.1.3.6.1.4.1.25972.0.5.20.3.2.1
dhcpServerClientInfoIndexIndex of DHCP client.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.3.2.1.1
dhcpServerClientInfoIPAddrThe IP address of client.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.3.2.1.2
dhcpServerClientInfoIDThe ID(MAC address) of client.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.3.2.1.3
dhcpServerClientInfoTypeThe type of client. bootptab: Entry comes from bootptab file. dynamic: Entry is dynamiclly created w/defaults for dhcp offer. sniffed: Entry is learned by snooping on net traffic. dbase: Entry is manually entered by user.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.3.2.1.4
dhcpServerClientInfoStatusThe status of client. Unassigned: none of the following. BOOTP: Entry has been assigned via plain bootp. DHCPOffer: Entry has a dhcp offer pending. DHCP: Entry has been assigned via DHCP.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.3.2.1.5
dhcpServerClientInfoLeaseThe lease time of client(in second).ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.3.2.1.6
dhcpServerIPBindingTableTable of descriptive information and configuration about IP binding of DHCP server.
SEQUENCE OF DHCPServerIPBindingEntry
.1.3.6.1.4.1.25972.0.5.20.3.3
dhcpServerIPBindingEntryAn entry in the table, containing IP binding information of DHCP server.
DHCPServerIPBindingEntry
.1.3.6.1.4.1.25972.0.5.20.3.3.1
dhcpServerIPBindingPortNumThe port number.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.3.3.1.1
dhcpServerIPBindingAddrThe IP binding address.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.3.3.1.2
portSetting
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.4
portControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.4.1
portCtrlTableTable of status information and configuration about each switch ports(including expansion slot).
SEQUENCE OF PortCtrlEntry
.1.3.6.1.4.1.25972.0.5.20.4.1.1
portCtrlEntryAn entry in the table, containing information about configuration in one switch port of the switch.
PortCtrlEntry
.1.3.6.1.4.1.25972.0.5.20.4.1.1.1
portCtrlIndexIndex of port management table.
Integer32
.1.3.6.1.4.1.25972.0.5.20.4.1.1.1.1
portCtrlPortNameThe name of port.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.4.1.1.1.2
portCtrlPortStatusTo disable (or enable) control of this port.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.4.1.1.1.3
portCtrlNegotiationThe mode of network negoticaion, (1)Automatic (2)Forcerw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.4.1.1.1.4
portCtrlSpeedSet the speed of the port. If portCtrlNegotiation is auto, this object can't be modified.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.4.1.1.1.5
portCtrlDuplexSet full-duplex or half-duplex mode of the port. If portCtrlNegotiation is auto, this object can't be modified.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.4.1.1.1.6
portCtrlFlowControlSet flow control.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.4.1.1.1.7
portCtrlSecuritySet port security.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.4.1.1.1.8
rateLimiting
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.4.2
rateLimitingTableTable of descriptive information and configuration about port rate limiting in this system. You can set up every port 3/4s bandwidth rate and packet limitation type.
SEQUENCE OF RateLimitingEntry
.1.3.6.1.4.1.25972.0.5.20.4.2.1
rateLimitingEntryAn entry in the table, containing information about port rate limiting.
RateLimitingEntry
.1.3.6.1.4.1.25972.0.5.20.4.2.1.1
rateLimitingPortNumPort number.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.4.2.1.1.1
rateLimitingPortTypeLimit Packet type: select the packet type that want to filter. The packet types have all type packet, broadcast/multicast/ unknown unicast packet, broadcast/multicast packet, and broadcast packet only. The broadcast/multicast/unknown unicast packet, broadcast/multicast packet, and broadcast packet only are only for ingress packet. The egress rate only supports all type packets.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.4.2.1.1.2
rateLimitingIngressRateIngress rate, the rate range is from 64 kbps to 102400 kbps (or 250000 kbps for giga ports), and zero means no limit.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.4.2.1.1.3
rateLimitingEgressRateEgress rate, the rate range is from 64 kbps to 102400 kbps (or 250000 kbps for giga ports), and zero means no limit.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.4.2.1.1.4
portTrunk
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.4.3
aggregatorSetting
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.4.3.1
portTrunkSysPriThe system priority of trunking.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.4.3.1.1
portTrunkAggregatorTableTable of descriptive information and configuration about of each trunk group in this system. Link aggregation lets you group up to switch-port-num consecutive ports into a single dedicated connection. This feature can expand bandwidth to a device on the network, such as another switch or a server.
SEQUENCE OF PortTrunkAggregatorEntry
.1.3.6.1.4.1.25972.0.5.20.4.3.1.2
portTrunkAggregatorEntryAn entry in the table, containing information about aggregator setting of the trunk.
PortTrunkAggregatorEntry
.1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1
portTrunkAggregatorIndexIndex of trunk aggregator table.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.1
portTrunkAggregatorGroupNameThe name of trunk group.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.2
portTrunkAggregatorMemberPortsThe members of trunk group.rw
PortList
.1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.3
portTrunkAggregatorLACPStatusThe LACP function of trunking. (1) LACP is enabled for the group. (2) LACP is disabled for the group.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.4
portTrunkAggregatorWorkPortsThe works ports of trunked group, the number of work ports should be equal to the count of members in static trunking(ie. LACP is disabled), and should not greater than the count of members in static/ dynamic trunking.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.5
aggregatorStatus
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.4.3.2
portTrunkAggregatorInfoTableTable of descriptive information about trunk group in this system.
SEQUENCE OF PortTrunkAggregatorInfoEntry
.1.3.6.1.4.1.25972.0.5.20.4.3.2.1
portTrunkAggregatorInfoEntryAn entry in the table, containing information about the trunk group.
PortTrunkAggregatorInfoEntry
.1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1
portTrunkAggregatorInfoIndexIndex of trunk information table.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.1
portTrunkAggregatorInfoGroupNameThe name of trunk group.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.2
portTrunkAggregatorInfoDescriptionThe dscription of trunk group.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.3
stateActivity
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.4.3.3
portTrunkLACPStateActTableTable of descriptive information and configuration about of each trunk group in this system.
SEQUENCE OF PortTrunkLACPStateActEntry
.1.3.6.1.4.1.25972.0.5.20.4.3.3.1
portTrunkLACPStateActEntryAn entry in the table, containing information about LACP state activity of the trunk.
PortTrunkLACPStateActEntry
.1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1
portTrunkLACPStateActPortNumPort number.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1.1
portTrunkLACPStateActStatusThe LACP state activity of the port. (1) Active. (2) Passive. (3) LACP doesn't be enabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1.2
redundancy
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.5
redundantRing
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.5.1
redundantRingStatusredundantRing function status. (1) redundantRing function is enabled. (2) redundantRing function is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.1.1
redundantRingMasterStatusRing Master function status. (1) Ring Master function is enabled. (2) Ring Master function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2)rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.1.2
redundantRingPort1Port Id(1~8) will be working port. The system will automatically decide which port is working port and which port is backup port if the redundantRingStatus object is set to enabled(1).rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.1.3
redundantRingPort2Port Id(1~8) will be working port. The system will automatically decide which port is working port and which port is backup port if the redundantRingStatus object is set to enabled(1).rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.1.4
redundantRingCoupleRingStatusCouple Ring function status. (1) Couple Ring function is enabled. (2) Couple Ring function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2)rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.1.5
redundantRingCouplingPortCoupling Port.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.1.6
redundantRingDualHomingStatusCouple Ring function status. (1) Dual Homing function is enabled. (2) Dual Homing function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2)rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.1.7
redundantRingHomingPortHoming Port.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.1.8
redundantRingMasterHStatusRing Master function hardware status. (1) Ring Master function is enabled. (2) Ring Master function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2)ro
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.1.9
rstp
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.5.3
rstpStatusEnable/Disable rapid spanning tree protocol for system.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.3.1
rstpPriorityA value used to identify the root bridge. The bridge with the lowest value has the highest priority and is selected as the root. Enter a number 0 through 61440 in steps of 4096. If you change the value, you must restart RSTP. This item can't be modified, if rstpStatus was disabled.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.2
rstpMaxAgeThe number of seconds a bridge waits without receiving Spanning-Tree Protocol configuration messages before attempting a reconfiguration. Enter a number 6 through 40. Note: 2*(Forward Delay Time-1) should be greater than or equal to the Max Age. The Max Age should be greater than or equal to 2*(Hello Time + 1). This item can't be modified, if rstpStatus was disabled.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.3
rstpHelloTimeThe number of seconds between the transmission of Spanning-Tree Protocol configuration messages. Enter a number 1 through 10 Note: 2*(Forward Delay Time-1) should be greater than or equal to the Max Age. The Max Age should be greater than or equal to 2*(Hello Time + 1). This item can't be modified, if rstpStatus was disabled.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.4
rstpForwardDelayTimeThe number of seconds a port waits before changing from its Spanning-Tree Protocol learning and listening states to the forwarding state. Enter a number 4 through 30. Note:2*(Forward Delay Time-1) should be greater than or equal to the Max Age. The Max Age should be greater than or equal to 2*(Hello Time + 1). This item can't be modified, if rstpStatus was disabled.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.5
rstpPerPortCfgTableTable of descriptive information and configuration about rapid spanning tree (Per port).
SEQUENCE OF RstpPerPortCfgEntry
.1.3.6.1.4.1.25972.0.5.20.5.3.6
rstpPerPortCfgEntryAn entry in the table, containing configuration about RSTP (Per port).
RstpPerPortCfgEntry
.1.3.6.1.4.1.25972.0.5.20.5.3.6.1
rstpPerPortCfgPortNumPort number.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.6.1.1
rstpPerPortCfgPathCostThe cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.6.1.2
rstpPerPortCfgPriorityDecide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.6.1.3
rstpPerPortCfgAdminP2PSome of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bridge(ie., it is served by a point-to-point LAN segment), or can be connected to two or more Bridges(i.e., it is served by a shared medium LAN segment). The adminPointToPointMAC allow the p2p status of the link to be manipulated adminitratively.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.3.6.1.4
rstpPerPortCfgAdminEdgePresent in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the network and can thus directly transition to forwarding, skipping the listening and learning stages.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.3.6.1.5
rstpPerPortCfgAdminNonStpIf true, this port will not participate in RSTP.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.3.6.1.6
rstpRootBridgeInformationTableTable of descriptive information about root bridge of rapid spanning tree in this system.
SEQUENCE OF RstpRootBridgeInformationEntry
.1.3.6.1.4.1.25972.0.5.20.5.3.7
rstpRootBridgeInformationEntryAn entry in the table, containing information about root bridge information of the RSTP.
RstpRootBridgeInformationEntry
.1.3.6.1.4.1.25972.0.5.20.5.3.7.1
rstpRootBridgeInformationIndexIndex of root bridge information table.
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.7.1.1
rstpRootBridgeInformationBridgeIDBridge ID.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.5.3.7.1.2
rstpRootBridgeInformationRootPriorityRoot Priority.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.7.1.3
rstpRootBridgeInformationRootPortRoot Port.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.5.3.7.1.4
rstpRootBridgeInformationRootPathCostRoot Path Cost.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.7.1.5
rstpRootBridgeInformationMaxAgeMax Age.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.7.1.6
rstpRootBridgeInformationHelloTimeHello Time.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.7.1.7
rstpRootBridgeInformationForwardDelayForward Delay Time.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.7.1.8
rstpPerPortInfoTableTable of descriptive information and configuration about rapid spanning tree (Per port).
SEQUENCE OF RstpPerPortInfoEntry
.1.3.6.1.4.1.25972.0.5.20.5.3.8
rstpPerPortInfoEntryAn entry in the table, containing inforamtion about RSTP (Per port).
RstpPerPortInfoEntry
.1.3.6.1.4.1.25972.0.5.20.5.3.8.1
rstpPerPortInfoPortNumPort number.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.8.1.1
rstpPerPortInfoPathCostThe cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.8.1.2
rstpPerPortInfoPriorityDecide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.5.3.8.1.3
rstpPerPortInfoAdminP2PSome of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bridge(ie., it is served by a point-to-point LAN segment), or can be connected to two or more Bridges(i.e., it is served by a shared medium LAN segment). The adminPointToPointMAC allow the p2p status of the link to be manipulated adminitratively.ro
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.3.8.1.4
rstpPerPortInfoAdminEdgePresent in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the network and can thus directly transition to forwarding, skipping the listening and learning stages.ro
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.3.8.1.5
rstpPerPortInfoStpNeighborro
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.3.8.1.6
rstpPerPortInfoStatero
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.3.8.1.7
rstpPerPortInfoRolero
Enumeration
.1.3.6.1.4.1.25972.0.5.20.5.3.8.1.8
vlan
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.6
vlanOperationModeThe operation mode of vlan. (1)IEEE802.1Q VLAN, (2)Portbased VLAN, (3)VLAN is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.6.1
vlanGVRPEnable GVRP Protocol. The item has no meaning, if the operation mode of vlan isn't IEEE802.1Q.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.6.2
vlanIEEE8021QTableTable of descriptive information and configuration about IEEE802.1Q group in this system. Tag-based VLANs are based on IEEE 802.1Q specifications. Traffic is forwarded to VLAN member ports based on identifying VLAN tags in data packets. You can also configure the switch to interoperate with existing tag-based VLAN networks and legacy non-tag networks.
SEQUENCE OF VlanIEEE8021QEntry
.1.3.6.1.4.1.25972.0.5.20.6.3
vlanIEEE8021QEntryAn entry in the table, containing information and configuration of IEEE802.1Q vlan.
VlanIEEE8021QEntry
.1.3.6.1.4.1.25972.0.5.20.6.3.1
vlanIEEE8021QIndexIndex of IEEE802.1Q table.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.6.3.1.1
vlanIEEE8021QPortNameThe name of port.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.6.3.1.2
vlanIEEE8021QLinkTypeThe type of port: (1)Access Link (2)Trunk Link (3)Hybrid Linkrw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.6.3.1.3
vlanIEEE8021QUntaggedVidThe untagged vid of port. This item can't be modified, if link type is trunklink.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.6.3.1.4
vlanIEEE8021QTaggedVidsThe tagged vids of port. It's a descriptive statement of a list of tagged vids. Note: Every tagged vid is separated by a comma and no space-key be allowed. This item can't be modified, if link type is accesslink.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.6.3.1.5
vlanIEEE8021QGroupTableTable of descriptive information and configuration of each ieee802.1q group in this system. Tag-based VLANs are based on IEEE 802.1Q specifications. Traffic is forwarded to VLAN member ports based on identifying VLAN tags in data packets. You can also configure the switch to interoperate with existing tag-based VLAN networks and legacy non-tag networks.
SEQUENCE OF VlanIEEE8021QGroupEntry
.1.3.6.1.4.1.25972.0.5.20.6.4
vlanIEEE8021QGroupEntryAn entry in the table, containing information about group name of the IEEE802.1Q vlan.
VlanIEEE8021QGroupEntry
.1.3.6.1.4.1.25972.0.5.20.6.4.1
vlanIEEE8021QGroupVidVlan ID.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.6.4.1.1
vlanIEEE8021QGroupNameThe group name of vlan.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.6.4.1.2
vlanIEEE8021QGroupStatusThe status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.6.4.1.3
vlanPortBasedTableTable of descriptive information and configuration about of each port based vlan group in this system. Traffic is forwarded to the member ports of the same vlan group. By adding ports to the VLAN you have created one port-based vlan group completely
SEQUENCE OF VlanPortBasedEntry
.1.3.6.1.4.1.25972.0.5.20.6.5
vlanPortBasedEntryAn entry in the table, containing information about port based vlan.
VlanPortBasedEntry
.1.3.6.1.4.1.25972.0.5.20.6.5.1
vlanPortBasedIndexIndex of port-based vlan table.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.6.5.1.1
vlanPortBasedGroupNameThe group name of vlan.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.6.5.1.2
vlanPortBasedVidThe vid of vlan. Vid should be the value between 1 to 4094.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.6.5.1.3
vlanPortBasedMembersThe member mask of vlan. Note: If there were a trunking group, all of trunking members should be in the same vlan group. If some members of trunking group doesn't be included in vlan group, the SNMP agent reports error.rw
PortList
.1.3.6.1.4.1.25972.0.5.20.6.5.1.4
vlanPortBasedStatusThe status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.6.5.1.5
snmp
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.7
snmpAgentModeThe Agent mode of snmp agent. (1) SNMPV1/V2C Only. (2) SNMPV3. (3) SNMPV1/V2C/V3rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.7.1
snmpSystemNameThe system name.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.7.2
snmpSystemLocationThe system location.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.7.3
snmpSystemContactThe contact information of system.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.7.4
snmpCommunityStringTableTable of descriptive and information about community string of SNMP agent.
SEQUENCE OF SnmpCommunityStringEntry
.1.3.6.1.4.1.25972.0.5.20.7.5
snmpCommunityStringEntryAn entry in the table, containing inforamtion about community string of SNMP agent.
SnmpCommunityStringEntry
.1.3.6.1.4.1.25972.0.5.20.7.5.1
snmpCommunityStringIndexIndex of community string.
Integer32
.1.3.6.1.4.1.25972.0.5.20.7.5.1.1
snmpCommunityStringNameThe community string of SNMP agent.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.7.5.1.2
snmpCommunityStringAttributeThe attribute of community string.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.7.5.1.3
snmpCommunityStringStatusThe status of this entry. If this object is not equal to valid(1), all associated snmp entries shall be deleted by the agent.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.7.5.1.4
snmpTrapServerTableTable of descriptive and information about trap server of SNMP agent.
SEQUENCE OF SnmpTrapServerEntry
.1.3.6.1.4.1.25972.0.5.20.7.6
snmpTrapServerEntryAn entry in the table, containing inforamtion about trap server of SNMP agent.
SnmpTrapServerEntry
.1.3.6.1.4.1.25972.0.5.20.7.6.1
snmpTrapServerIndexIndex of trap server.
Integer32
.1.3.6.1.4.1.25972.0.5.20.7.6.1.1
snmpTrapServerIPAddrTrap Server IP Address.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.7.6.1.2
snmpTrapServerTrapCommThe community string of trap server.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.7.6.1.3
snmpTrapServerTrapVerThe trap version.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.7.6.1.4
snmpTrapServerStatusThe status of this entry. If this object is not equal to valid(1), all associated snmp entries shall be deleted by the agent.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.7.6.1.5
trafficPrioritization
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.8
qosPolicy(1)Using the 8, 4, 2, 1 weight fair queue scheme. (2)Use the strict priority scheme. Using the 8, 4, 2, 1 weight fair queue scheme: the switch will follow 8:4:2:1 rate to process priority queue from Hi to lowest queue. For example: the system will process 8 high queue packets, 4 middle queue packets, 2 low queue packets, and the one lowest queue packets at the same time. Use the strict priority scheme: Always higher queue will be process first, except higher queue is empty.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.8.1
qosPriorityType(1)Port Base (2)COS only (3)TOS only (4)COS first (5)TOS first (6)Disabled Port-base: the port priority will follow the default port priority that you have assigned - High, middle, low, or lowest. COS only: the port priority will only follow the COS priority that you have assigned. TOS only: the port priority will only follow the TOS priority that you have assigned. COS first: the port priority will follow the COS priority first, and then other priority rule. TOS first: the port priority will follow the TOS priority first, and the other priority rule.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.8.2
qosPortBasedPriorityTableTable of descriptive information and configuration about PortBased QOS.
SEQUENCE OF QosPortBasedPriorityEntry
.1.3.6.1.4.1.25972.0.5.20.8.3
qosPortBasedPriorityEntryAn entry in the table, containing inforamtion about PortBased QOS.
QosPortBasedPriorityEntry
.1.3.6.1.4.1.25972.0.5.20.8.3.1
qosPortBasedPriorityPortNumPort number.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.8.3.1.1
qosPortBasedPriorityThe port priority will follow the default port priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.8.3.1.2
qosCOSTableTable of descriptive information and configuration about PortBased QOS.
SEQUENCE OF QosCOSEntry
.1.3.6.1.4.1.25972.0.5.20.8.4
qosCOSEntryAn entry in the table, containing inforamtion about COS QOS.
QosCOSEntry
.1.3.6.1.4.1.25972.0.5.20.8.4.1
qosCOSPriorityCOS priority.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.8.4.1.1
qosCOSThe port priority will follow the COS priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.8.4.1.2
qosCOSPortDefaultTableTable of descriptive information and configuration about PortBased QOS.
SEQUENCE OF QosCOSPortDefaultEntry
.1.3.6.1.4.1.25972.0.5.20.8.5
qosCOSPortDefaultEntryAn entry in the table, containing inforamtion about COS QOS.
QosCOSPortDefaultEntry
.1.3.6.1.4.1.25972.0.5.20.8.5.1
qosCOSPortCOS Default Panel Port.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.8.5.1.1
qosCOSPortDefaultCOS Default Panel Port Priority.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.8.5.1.2
qosTOSTableTable of descriptive information and configuration about PortBased QOS.
SEQUENCE OF QosTOSEntry
.1.3.6.1.4.1.25972.0.5.20.8.6
qosTOSEntryAn entry in the table, containing inforamtion about TOS QOS.
QosTOSEntry
.1.3.6.1.4.1.25972.0.5.20.8.6.1
qosTOSPriorityTOS priority.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.8.6.1.1
qosTOSThe port priority will follow the TOS priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.8.6.1.2
multicast
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.9
igmp
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.9.1
igmpStatusParameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. The Internet Group Management Protocol (IGMP) is an internal protocol of the Internet Protocol (IP) suite. IP manages multicast traffic by using switches, routers, and hosts that support IGMP. Enabling IGMP allows the ports to detect IGMP queries and report packets and manage IP multicast traffic through the switch. IGMP have three fundamental types of message as follows: Message Description -------------------------------------------------------------- Query A message sent from the querier (IGMP router or switch) asking for a response from each host belonging to the multicast group. Report A message sent by a host to the querier to indicate that the host wants to be or is a member of a given group indicated in the report message. Leave Group A message sent by a host to the querier to indicate that the host has quit to be a member of a specific multicast group. You can enable IGMP protocol and IGMP Query function. You will see the IGMP snooping information in this section -- difference multicast group VID and member port, and IP multicast addresses range from 224.0.0.0 through 239.255.255.255.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.9.1.1
igmpQuery(1)Detect querier automatically. (2)Force to be a querier. (3)Be a silence snooper. The mode of querier.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.9.1.2
igmpEntriesTableTable of descriptive information about IGMP entries.
SEQUENCE OF IgmpEntriesEntry
.1.3.6.1.4.1.25972.0.5.20.9.1.3
igmpEntriesEntryAn entry in the table, containing inforamtion about IGMP.
IgmpEntriesEntry
.1.3.6.1.4.1.25972.0.5.20.9.1.3.1
igmpEntriesEntryIndexIndex of IGMP table.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.9.1.3.1.1
igmpEntriesEntryIPAddrThe IP address of an IGMP entry.ro
IpAddress
.1.3.6.1.4.1.25972.0.5.20.9.1.3.1.2
igmpEntriesEntryVIDThe VLAN ID of an IGMP entry.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.9.1.3.1.3
igmpEntriesEntryMembersThe member ports mask of IGMP entry.ro
PortList
.1.3.6.1.4.1.25972.0.5.20.9.1.3.1.4
multicastfiltering
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.9.3
multicastfilteringEntriesTableTable of descriptive information about multicast filtering entries.
SEQUENCE OF MulticastfilteringEntriesEntry
.1.3.6.1.4.1.25972.0.5.20.9.3.1
multicastfilteringEntriesEntryAn entry in the table, containing inforamtion about multicast filtering entries.
MulticastfilteringEntriesEntry
.1.3.6.1.4.1.25972.0.5.20.9.3.1.1
multicastFilteringIndexThis object identifies the switch within the system for which this entry contains information.
Integer32
.1.3.6.1.4.1.25972.0.5.20.9.3.1.1.1
multicastFilteringAddrGroup IP Address.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.9.3.1.1.2
multicastFilteringMemberportsThe member mask of group.rw
PortList
.1.3.6.1.4.1.25972.0.5.20.9.3.1.1.3
multicastFilteringStatusThe status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.9.3.1.1.4
security
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.10
ipSecurityMgt
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.10.1
ipSecurityStatusIP Security function status. (1) IP Security function is enabled. (2) IP Security function is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.10.1.1
ipSecurityHTTPServerStatusIP Security function status. (1) IP Security of HTTP server function is enabled. (2) IP Security of HTTP server function is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.10.1.2
ipSecurityTelnetServerStatusIP Security function status. (1) IP Security of telnet server function is enabled. (2) IP Security of telnet server function is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.10.1.3
ipSecuritySNMPServerStatusIP Security function status. (1) IP Security of SNMP server function is enabled. (2) IP Security of SNMP server function is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.10.1.4
ipSecuritySecurityIP1This IP address can access and manage the switch through the Web browser.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.10.1.5
ipSecuritySecurityIP2This IP address can access and manage the switch through the Web browser.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.10.1.6
ipSecuritySecurityIP3This IP address can access and manage the switch through the Web browser.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.10.1.7
ipSecuritySecurityIP4This IP address can access and manage the switch through the Web browser.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.10.1.8
ipSecuritySecurityIP5This IP address can access and manage the switch through the Web browser.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.10.1.9
ipSecuritySecurityIP6This IP address can access and manage the switch through the Web browser.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.10.1.10
ipSecuritySecurityIP7This IP address can access and manage the switch through the Web browser.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.10.1.11
ipSecuritySecurityIP8This IP address can access and manage the switch through the Web browser.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.10.1.12
ipSecuritySecurityIP9This IP address can access and manage the switch through the Web browser.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.10.1.13
ipSecuritySecurityIP10This IP address can access and manage the switch through the Web browser.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.10.1.14
portSecurityMgt
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.10.2
portSecurityTableTable of descriptive information about static MAC per port configuration. When you add a static MAC address, it remains in the switch's address table, regardless of whether the device is physically connected to the switch. This saves the switch from having to re-learn a device's MAC address when the disconnected or powered-off device is active on the network again.
SEQUENCE OF PortSecurityEntry
.1.3.6.1.4.1.25972.0.5.20.10.2.1
portSecurityEntryAn entry in the table, containing inforamtion about static MAC per port configuration.
PortSecurityEntry
.1.3.6.1.4.1.25972.0.5.20.10.2.1.1
portSecurityIndexIndex of MAC.
Integer32
.1.3.6.1.4.1.25972.0.5.20.10.2.1.1.1
portSecurityPortNameThe port name, if you want to insert a new MAC entry, the port name must be correct (Please refer to the switchCurrentPortNameListTable) when creating a new entry.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.10.2.1.1.2
portSecurityAddrMAC address of the entry.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.25972.0.5.20.10.2.1.1.3
portSecurityStatusThe status of this entry. If this object is not equal to valid(1), all associated MAC entries shall be deleted by the agent.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.10.2.1.1.4
macBlacklist
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.10.3
macBlacklistTableTable of descriptive information about MAC filter configuration. MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the destination addresses. For example, if your network is congested because of high utilization from one MAC address, you can filter all traffic transmitted to that MAC address, restoring network flow while you troubleshoot the problem.
SEQUENCE OF MACBlacklistEntry
.1.3.6.1.4.1.25972.0.5.20.10.3.1
macBlacklistEntryAn entry in the table, containing inforamtion about MAC filter configuration.
MACBlacklistEntry
.1.3.6.1.4.1.25972.0.5.20.10.3.1.1
macBlacklistIndexIndex of MAC.
Integer32
.1.3.6.1.4.1.25972.0.5.20.10.3.1.1.1
macBlacklistAddrMAC address of the entry.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.25972.0.5.20.10.3.1.1.2
macBlacklistStatusThe status of this entry. If this object is not equal to valid(1), all associated MAC entries shall be deleted by the agent.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.10.3.1.1.3
ieee8021x
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.10.4
radiusServerSetting
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.10.4.1
radius8021xProtocolStatusIEEE802.1x protocol function status. (1) IEEE802.1x protocol function is enabled. (2) IEEE802.1x protocol function is disabled. 802.1x makes use of the physical access characteristics of IEEE802 LAN infrastructures in order to provide a means of authenticating and authorizing devices attached to a LAN port that has point-to-point connection characteristics, and of preventing access to that port in cases in which the authentication and authorization process fails.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.10.4.1.1
radiusServerIPRadius Server IP Address: the ip address of the authentication server.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.10.4.1.2
radiusServerPortServer Port: The UDP port number used by the authentication server to authenticate.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.10.4.1.3
radiusAccountingPortAccounting Port: The UDP port number used by the authentication server to retrieve accounting information.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.10.4.1.4
radiusSharedKeyShared Key: A key shared between this switch and authentication server.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.10.4.1.5
radiusNASIdentifierNAS Identifier: A string used to identify this switch.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.10.4.1.6
radiusMiscQuietPeriodQuiet Period: used to define periods of time during which it will not attempt to acquire a supplicant (Default time is 60 seconds).rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.10.4.1.7
radiusMiscTxPeriodTx Period: used to determine when an EAPOL PDU is to be transmitted(Default value is 30 seconds).rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.10.4.1.8
radiusMiscSupplicantTimeoutSupplicant Timeout: used to determine timeout conditions in the exchanges between the supplicant and authentication server(Default value is 30 seconds).rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.10.4.1.9
radiusMiscServerTimeoutServer Timeout: used to determine timeout conditions in the exchanges between the authenticator and authentication server(Default value is 30 seconds).rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.10.4.1.10
radiusMiscReAuthMaxReAuthMax: used to determine the number of reauthentication attempts that are permitted before the specific port becomes unauthorized (Default value is 2 times).rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.10.4.1.11
radiusMiscReauthPeriodReauth Period: used to determine a nonzero number of seconds between periodic reauthentication of the supplications(Default value is 3600 seconds).rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.10.4.1.12
portAuthConfiguration
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.10.4.2
radiusPerPortCfgTableTable of descriptive information and configuration about Radius per port configuration.
SEQUENCE OF RadiusPerPortCfgEntry
.1.3.6.1.4.1.25972.0.5.20.10.4.2.1
radiusPerPortCfgEntryAn entry in the table, containing inforamtion about Radius per port configuration.
RadiusPerPortCfgEntry
.1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1
radiusPerPortCfgIndexIndex of port.
Integer32
.1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1.1
radiusPerPortCfgPortNameThe name of port.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1.2
radiusPerPortCfgStateYou can select the specific port and configure the authorization state. Each port can select four kinds of authorization state : Reject: force the specific port to be unauthorized. Accept: force the specific port to be authorized. Authorize: the state of the specific port was determinied by the outcome of the authentication. Disable: the specific port didn't support 802.1x function.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1.3
warning
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.11
faultAlarm
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.11.1
faultAlarmPwr1State of Power1 failure alarm.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.11.1.1
faultAlarmPwr2State of Power1 failure alarm.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.11.1.2
faultAlarmPortCfgTableTable of descriptive information and configuration about fault alarm per port configuration.
SEQUENCE OF FaultAlarmPortCfgEntry
.1.3.6.1.4.1.25972.0.5.20.11.1.3
faultAlarmPortCfgEntryAn entry in the table, containing inforamtion about falut alarm per port configuration.
FaultAlarmPortCfgEntry
.1.3.6.1.4.1.25972.0.5.20.11.1.3.1
faultAlarmPortCfgNumIndex of port.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.11.1.3.1.1
faultAlarmPortLinkStatusState of Port Link Down/Broken failure alarm.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.11.1.3.1.2
sysLogConfiguration
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.11.2
syslogStatusParameter to specify the log should be sent to syslog server, or the log should be kept in switch. When disabled, the switch won't send out or record any log.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.11.2.1
eventServerAddrThe IP address of syslog server. It can't be modified when syslogStatus is disabled.rw
IpAddress
.1.3.6.1.4.1.25972.0.5.20.11.2.2
smtpConfiguration
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.11.3
eventEmailAlertStatusParameter to enable the Email alert feature, When enabled, the switch will send the mail to the address presented in emailAlertRcptTable.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.11.3.1
eventEmailAlertAddrThe IP address of SMTP server. It can't be modified when eventEmailAlertStatus is disabled.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.11.3.2
eventEmailAlertAuthenticationParameter to enable the authentication feature SMTP server. It can't be modified when eventEmailAlertStatus is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.11.3.3
eventEmailAlertAccountThe Email account for SMTP server. It can't be modified when eventEmailAlertAuthentication is disabled.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.11.3.4
eventEmailAlertPasswordThe password of Email account. It can't be modified when eventEmailAlertAuthentication is disabled.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.11.3.5
emailAlertRcptTableTable of descriptive information of recipient Email address list.
SEQUENCE OF EmailAlertRcptEntry
.1.3.6.1.4.1.25972.0.5.20.11.3.6
emailAlertRcptEntryAn entry in the table, containing recipient Email addresses.
EmailAlertRcptEntry
.1.3.6.1.4.1.25972.0.5.20.11.3.6.1
eventEmailAlertRcptIndexIndex of recipient Email address.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.11.3.6.1.1
eventEmailAlertRcptEmailAddrThe recipient Email address.rw
DisplayString
.1.3.6.1.4.1.25972.0.5.20.11.3.6.1.2
eventSelection
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.11.4
systemEventsTableTable of descriptive information about system events.
SEQUENCE OF SystemEventsEntry
.1.3.6.1.4.1.25972.0.5.20.11.4.1
systemEventsEntryAn entry in the table, containing type of system events.ro
SystemEventsEntry
.1.3.6.1.4.1.25972.0.5.20.11.4.1.1
eventSystemEventsIndexIndex of events.
Integer32
.1.3.6.1.4.1.25972.0.5.20.11.4.1.1.1
eventDeviceRestartEventParameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.11.4.1.1.2
eventPowerStatusEventParameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.11.4.1.1.3
eventAuthenticationFailureEventParameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.11.4.1.1.4
eventRingTopologyChangeEventParameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.11.4.1.1.5
portEventsTableTable of descriptive information about port events.
SEQUENCE OF PortEventsEntry
.1.3.6.1.4.1.25972.0.5.20.11.4.2
portEventsEntryAn entry in the table, containing type of port events.
PortEventsEntry
.1.3.6.1.4.1.25972.0.5.20.11.4.2.1
eventPortNumberPort number for port event table.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.11.4.2.1.1
eventPortEventLogParameter to indicate the which event should be logged. The value can't be modified, if syslogStatus is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.11.4.2.1.2
eventPortEventSMTPParameter to indicate the which event should be an Email alert. The value can't be modified, if eventEmailAlertStatus is disabled.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.11.4.2.1.3
monitorAndDiag
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.12
macAddressTable
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.12.1
agingTimeSettingThe MAC address table flush time.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.12.1.1
flushMACStatus(1)Enable Flush MAC address table when ports link down. (2)Disable Flush MAC address table when ports link down.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.12.1.2
macAddrTableTable of descriptive information about MAC filter configuration.
SEQUENCE OF MACAddrEntry
.1.3.6.1.4.1.25972.0.5.20.12.1.3
macAddrEntryAn entry in the table, containing inforamtion about all MAC configuration.
MACAddrEntry
.1.3.6.1.4.1.25972.0.5.20.12.1.3.1
macAddressAddrMAC address of the entry.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.25972.0.5.20.12.1.3.1.1
macAddressPortNameThe port name, if you want to insert a new MAC entry, the port name must be correct (Please refer to the switchCurrentPortNameListTable) when creating a new entry.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.12.1.3.1.2
macAddressTypeThe type of this entry.ro
Enumeration
.1.3.6.1.4.1.25972.0.5.20.12.1.3.1.3
portSecurityClearMACTableSet to active for cleaning all the MAC entries in MAC table.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.12.1.4
portStatistic
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.12.2
switchPortStatTableTable of descriptive and statistics information about each switch ports(including expansion slot).
SEQUENCE OF SwitchPortStatEntry
.1.3.6.1.4.1.25972.0.5.20.12.2.1
switchPortStatEntryAn entry in the table, containing information about statistics in one switch port of the switch.
SwitchPortStatEntry
.1.3.6.1.4.1.25972.0.5.20.12.2.1.1
swPortStatIndexIndex of port statistic table.
Integer32
.1.3.6.1.4.1.25972.0.5.20.12.2.1.1.1
swPortStatTypeIndicates the port type.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.12.2.1.1.2
swPortStatStateIndicates the port statero
Enumeration
.1.3.6.1.4.1.25972.0.5.20.12.2.1.1.4
swPortStatTXGoodPktThe count of good packets of TX.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.12.2.1.1.5
swPortStatTXBadPktThe count of bad packets of TX.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.12.2.1.1.6
swPortStatRXGoodPktThe count of good packets of RX.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.12.2.1.1.7
swPortStatRXBadPktThe count of bad packets of RX.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.12.2.1.1.8
swPortStatTXAbortPktThe count of abort packets of TX.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.12.2.1.1.9
swPortStatPacketCollisionThe count of collision.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.12.2.1.1.10
portmirroring
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.12.3
swPortMirrorDestinationPortTXThe TX destination port (sniffer port). Destination port can be used to see all monitor port traffic. You can connect sniffer port to lan analysier or netxray.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.12.3.1
swPortMirrorDestinationPortRXThe RX destination port (sniffer port). Destination port can be used to see all monitor port traffic. You can connect sniffer port to lan analysier or netxray.rw
Integer32
.1.3.6.1.4.1.25972.0.5.20.12.3.2
switchPortMirrorSourceTableTable of descriptive information and configuration of port mirror in this system. The Port Sniffer is a method for monitor traffic in switched networks. Use this tabe to select monitor port for this switch.
SEQUENCE OF SwitchPortMirrorSourceEntry
.1.3.6.1.4.1.25972.0.5.20.12.3.3
switchPortMirrorSourceEntryAn entry in the table, containing information about port mirror.
SwitchPortMirrorSourceEntry
.1.3.6.1.4.1.25972.0.5.20.12.3.3.1
swPortMirrorPortNumPort number.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.12.3.3.1.1
swPortMirrorSourcePortThe mode of source port (monitor port). (1) TX only. (2) RX only. (3) RX and TX. (4) Source port is disabled. The ports you want to monitor. All source port traffic will be copied to destination port (sniffer port).rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.12.3.3.1.2
eventLog
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.12.4
eventLogTableTable of descriptive information about logs.
SEQUENCE OF EventLogEntry
.1.3.6.1.4.1.25972.0.5.20.12.4.1
eventLogEntryAn entry in the table, containing list of logs.
EventLogEntry
.1.3.6.1.4.1.25972.0.5.20.12.4.1.1
eventLogIndexIndex of log.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.12.4.1.1.1
eventLogDescriptionThe description of log.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.12.4.1.1.2
saveConfiguration
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.13
saveCfgMgtActionSetting this object to active(1) triger saving current configuration. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.13.1
factoryDefault
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.14
factoryDefaultActionSetting this object to keep-ip-and-username-password(1), keep-ip(2), keep-username-password(3) , and keep-nothing(4), triger loading facotory default configuration. Setting this object to notActive(5) has no effect. The system always returns the value notActive(5) when this object is read.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.14.1
systemReboot
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.15
systemRebootActionSetting this object to active(1) triger the system restart. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read.rw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.15.1
misc
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.24
specificTrap
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.24.1
trapPowerStatusIndicates the switch power statusro
Enumeration
.1.3.6.1.4.1.25972.0.5.20.24.1.1
trapTopologyChangeredundantRing topology change counter.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.24.1.2
switchCurrentPortNameListTableTable of descriptive and status information about the logical ports in this system.
SEQUENCE OF SwitchCurrentPortNameListEntry
.1.3.6.1.4.1.25972.0.5.20.24.2
switchCurrentPortNameListEntryAn entry in the table, containing information about logical port name in this system.
SwitchCurrentPortNameListEntry
.1.3.6.1.4.1.25972.0.5.20.24.2.1
swCurrentPortNameListIndexIndex of logical port.
Integer32
.1.3.6.1.4.1.25972.0.5.20.24.2.1.1
swCurrentPortNameListPortNameThe name of logical port.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.24.2.1.2
swCurrentPortNameListPortNumberThe port number(s) that port name belong to. If the logical port stood for a trunk group, this object shows the members of trunk group.ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.24.2.1.3
powerOverEthernet
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.25
poeSystemSetting
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.25.1
poeMaximumPowerAvailablerw
Integer32
.1.3.6.1.4.1.25972.0.5.20.25.1.1
poeActualPowerConsumptionro
Integer32
.1.3.6.1.4.1.25972.0.5.20.25.1.2
poePortKnockoffDisabledPort Knockoff Disabledrw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.25.1.3
poeACDisconnectAC Disconnectrw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.25.1.4
poeCapacitiveDetectionCapacitive Detectionrw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.25.1.5
poePortStatus
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.25.2
poePortStatusTable
SEQUENCE OF PoePortStatusEntry
.1.3.6.1.4.1.25972.0.5.20.25.2.1
poePortStatusEntry
PoePortStatusEntry
.1.3.6.1.4.1.25972.0.5.20.25.2.1.1
poePortStatusIndexThis object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.25.2.1.1.1
poePortStatusStatero
Enumeration
.1.3.6.1.4.1.25972.0.5.20.25.2.1.1.3
poePortStatusCurrentCurrent(mA)ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.25.2.1.1.4
poePortStatusVoltageVoltage(V)ro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.25.2.1.1.5
poePortStatusPowerPower(mW)ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.25.2.1.1.6
poePortStatusDeterminedClassro
DisplayString
.1.3.6.1.4.1.25972.0.5.20.25.2.1.1.7
poePortControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.25972.0.5.20.25.3
poePortControlTable
SEQUENCE OF PoePortControlEntry
.1.3.6.1.4.1.25972.0.5.20.25.3.1
poePortControlEntry
PoePortControlEntry
.1.3.6.1.4.1.25972.0.5.20.25.3.1.1
poePortControlIndexThis object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.ro
Integer32
.1.3.6.1.4.1.25972.0.5.20.25.3.1.1.1
poePortControlStateStaterw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.25.3.1.1.2
poePortControlPowerLimitFromClassificationPower Limit From Classificationrw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.25.3.1.1.3
poePortControlLegacyLegacyrw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.25.3.1.1.4
poePortControlPriorityPriorityrw
Enumeration
.1.3.6.1.4.1.25972.0.5.20.25.3.1.1.5
poePortControlPowerLimitPower Limit (<15400)mWrw
Integer32
.1.3.6.1.4.1.25972.0.5.20.25.3.1.1.6