NH218-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
79
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
79 total| Object Name |
|---|
nbase OBJECT IDENTIFIER .1.3.6.1.4.1.629 |
RFC1155-SMI Unknown .1.3.6.1.4.1.629 |
gswitch OBJECT IDENTIFIER .1.3.6.1.4.1.629.2 |
nbsNPortsThe number of ports in this devicero INTEGER .1.3.6.1.4.1.629.2.1 |
nbsDevIdentify OBJECT IDENTIFIER .1.3.6.1.4.1.629.2.2 |
nbsUpLinkTypeUp-Link Type of the devicero Enumeration .1.3.6.1.4.1.629.2.2.1 |
nbsBaseHardVersHardware version of base cardro INTEGER .1.3.6.1.4.1.629.2.2.3 |
nbsCardHardVersHardware version of the agent cardro INTEGER .1.3.6.1.4.1.629.2.2.4 |
nbsUpLinkHardVersUp-Link hardware versionro INTEGER .1.3.6.1.4.1.629.2.2.5 |
nbsSoftVersAgent software versionro INTEGER .1.3.6.1.4.1.629.2.2.6 |
nbsSnifferPortSniffer Port Number.
Specify the Sniffer Port Number chosen by
the userro INTEGER .1.3.6.1.4.1.629.2.2.9 |
nbsCreatinDateAgent software creation date and timero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.629.2.2.10 |
nbsDeviceControl OBJECT IDENTIFIER .1.3.6.1.4.1.629.2.3 |
nbsSpanningTreeSpanning Tree Enable.
1 - The BPDU(Bridge Protocol Data Unit) packets are treated
as Multicast Packets, and therefore are forwarded to
all ports.
2 - Forwards BPDU(Bridge Protocol Data Unit) packets to the CPU only.rw Enumeration .1.3.6.1.4.1.629.2.3.6 |
nbsLearningProcessDisable Learning Process.
1 - Learning Process is disabled. The Switch-G will not learn
any new addresses from the wire.
2 - Learning Process is enabledrw Enumeration .1.3.6.1.4.1.629.2.3.7 |
nbsParitionEnablePartition Mode Enable.
When more then 32 collisions occur while transmitting, the
Switch-G port enters to the Partition mode. It waits for the first
good packet from the wire and then return to Normal mode of opration.
In Partition mode transmitting fromthe port is enabled but receiving is disabled.
1 - Patrition mode,
2 - Normal moderw Enumeration .1.3.6.1.4.1.629.2.3.8 |
nbsRMONmodeRMON Enable.
1 - The Switch-G enters the RMON mode(Station-to-Station
connectivity Matrix).
2 - RMON disabledrw Enumeration .1.3.6.1.4.1.629.2.3.9 |
nbsBufferThresholdBuffer Threshold Enable.
Meaningful only when RMONEn bit (internal) is set.
1 - The buffers allocated to the ports
are limited to the number which is written in the
Rx Buffers Threshold Register.
2 - There is no limitation on the buffers allocationrw Enumeration .1.3.6.1.4.1.629.2.3.10 |
nbsForwardMulticastForward Multicast.
Enable - multicast packets are Forwarded only to the CPU.
Disable - multicast packets are being forward to all portsrw Enumeration .1.3.6.1.4.1.629.2.3.12 |
nbsForwardUnkPktsForward Unknown Packets.
If defines whether the Switch-G will forward Unknown
packets to the Agent CPU or not.
1 - Forwared,
2 - Do not forwaredrw Enumeration .1.3.6.1.4.1.629.2.3.15 |
nbsBackOffModeThe CSMA/CD normal Back of mode multiples the back-off
time frame after each each collision. In aggressive mode
it stops to multiply after the second time. This way it
will have an advantage of any other NIC who uses normal
back-off mode.rw Enumeration .1.3.6.1.4.1.629.2.3.16 |
nbsPortsControl OBJECT IDENTIFIER .1.3.6.1.4.1.629.2.5 |
nbsPortsContTableA list of the port counters entries SEQUENCE OF NbsPortsContEntry .1.3.6.1.4.1.629.2.5.1 |
nbsPortsContEntryContains the information necessary to configure/describe a
port configuration. The number of rows/entries is fixed. A
row/entry may not be created or deleted NbsPortsContEntry .1.3.6.1.4.1.629.2.5.1.1 |
nbsPortIndex1The port# from 1 to nbsNPorts1ro INTEGER .1.3.6.1.4.1.629.2.5.1.1.1 |
nbsPortEnablePort Enable.
1 - Port is enabled
2 - Port is disabledrw Enumeration .1.3.6.1.4.1.629.2.5.1.1.2 |
nbsPortDuplexHalf/Full Duplex.
1 - Port works in Half-Duplex mode
2 - Port works in Full-Duplex moderw Enumeration .1.3.6.1.4.1.629.2.5.1.1.3 |
nbsPortMonitorMonitoring Mode.
1 - Port works in normal mode
2 - Port is set as Sniffer port (monitor mode) were all recived
and transmit packats from all ports are sent to the Sniffer portrw Enumeration .1.3.6.1.4.1.629.2.5.1.1.5 |
nbsPortPolDetectionAuto-Polarity Disable.
Enable/Disable Auto-Polarity detection function
1 - Disable
2 - Enablerw Enumeration .1.3.6.1.4.1.629.2.5.1.1.6 |
nbsPortBroadcastFilter Broadcast.
1 - Broadcast packats are forwarded to all ports.
2 - The Switch-G discards Broadcast packatsrw Enumeration .1.3.6.1.4.1.629.2.5.1.1.7 |
nbsPortForwardUnkForward Unknown.
1 - Unknown packats are forwarded.
2 - The Switch-G does not forward unknown packats
to this portrw Enumeration .1.3.6.1.4.1.629.2.5.1.1.8 |
nbsPortSpaningSpaning Tree Enable.
Meaniningful only when Spaning Tree for the switch is set
(nbsSpanningTree) is set.
1 - All packets are accepted.
2 - The Switch-G discards all incoming/outgoing packets
except for BPDU packetsrw Enumeration .1.3.6.1.4.1.629.2.5.1.1.9 |
nbsPortSpeedPorts Speed.
Meaningfull only for ports that support both 10 and 100
MBps speeds.
1 - Only for Uplink Ports: Switch-G - Ports ## 27,28
Switch-G - Ports ## 17,18
2 - After reset the port will operate in 10 MBps
3 - After reset the port will operate in 100 Mbps
4 - The port will operate in 1000 Mbps
5 - The port will operate in 10000 MBps (for example, XFP).rw Enumeration .1.3.6.1.4.1.629.2.5.1.1.10 |
nbsPortsStatus OBJECT IDENTIFIER .1.3.6.1.4.1.629.2.6 |
nbsPortsStatTableA list of all the port status objects SEQUENCE OF NbsPortsStatEntry .1.3.6.1.4.1.629.2.6.1 |
nbsPortsStatEntryThe ports status information.
port configuration. The number of rows/entries is fixed. A
row/entry may not be created or deleted NbsPortsStatEntry .1.3.6.1.4.1.629.2.6.1.1 |
nbsPortIndexThe port# from 1 to nbsNPorts1ro INTEGER .1.3.6.1.4.1.629.2.6.1.1.1 |
nbsPortTypePort Typero Enumeration .1.3.6.1.4.1.629.2.6.1.1.2 |
nbsPartitionPorts Partition.
Indicates the ports Partition status.
1 - No Partition (Normal mode)
2 - Partitionro Enumeration .1.3.6.1.4.1.629.2.6.1.1.3 |
nbsLinkTestPorts Link Test Fail.
Indicates the ports Link Test status
1 - Link Test Pass
2 - Link Test Failro Enumeration .1.3.6.1.4.1.629.2.6.1.1.4 |
nbsPortsCounters OBJECT IDENTIFIER .1.3.6.1.4.1.629.2.7 |
nbsPortsCountTableA list of the port counters entries SEQUENCE OF NbsPortsCountEntry .1.3.6.1.4.1.629.2.7.1 |
nbsPortsCountEntryContains the information necessary to configure/describe a
port configuration. The number of rows/entries is fixed. A
row/entry may not be created or deleted NbsPortsCountEntry .1.3.6.1.4.1.629.2.7.1.1 |
nbsPortIndex2The port# from 1 to nbsNPorts1ro INTEGER .1.3.6.1.4.1.629.2.7.1.1.1 |
nbsPortByteRecGood Bytes Recivedro Counter .1.3.6.1.4.1.629.2.7.1.1.2 |
nbsPortMulByteRecGood Multicast Bytes Recivedro Counter .1.3.6.1.4.1.629.2.7.1.1.3 |
nbsPortBroadByteRecGood Broadcast Bytes Recivedro Counter .1.3.6.1.4.1.629.2.7.1.1.4 |
nbsPortByteSentGood Bytes Sentro Counter .1.3.6.1.4.1.629.2.7.1.1.5 |
nbsPortFramesRecGood Frames Recivedro Counter .1.3.6.1.4.1.629.2.7.1.1.6 |
nbsPortMulFramesRecGood Multicast Frames Recivedro Counter .1.3.6.1.4.1.629.2.7.1.1.7 |
nbsPortBroadFramesRecBroadcast Frames Recivedro Counter .1.3.6.1.4.1.629.2.7.1.1.8 |
nbsPortFramesSentFrames Sentro Counter .1.3.6.1.4.1.629.2.7.1.1.9 |
nbsPortCollisionsRecive and Transmit Collisionro Counter .1.3.6.1.4.1.629.2.7.1.1.10 |
nbsPortLateCollRecive and Transmit Late Collisionro Counter .1.3.6.1.4.1.629.2.7.1.1.11 |
nbsPortCRCAligErrRecive CRC or Alignment Errorro Counter .1.3.6.1.4.1.629.2.7.1.1.12 |
nbsPortFramesShortRecive Framesro Counter .1.3.6.1.4.1.629.2.7.1.1.13 |
nbsPortFrameLongRecive Frames > 1518 bytes with Good CRCro Counter .1.3.6.1.4.1.629.2.7.1.1.14 |
nbsPortJabberRecive Frames > 1518 bytes with Bad CRCro Counter .1.3.6.1.4.1.629.2.7.1.1.15 |
nbsPortBadByteRecBad Bytes Recived.
Bytes with CRC errors and frame too longro Counter .1.3.6.1.4.1.629.2.7.1.1.16 |
nbsAddressTable OBJECT IDENTIFIER .1.3.6.1.4.1.629.2.8 |
nbsMACAddrTableThe DRAM address table contains all the MAC addresses
up to 8K records. SEQUENCE OF NbsMACAddrEntry .1.3.6.1.4.1.629.2.8.1 |
nbsMACAddrEntryThe entries (records) NbsMACAddrEntry .1.3.6.1.4.1.629.2.8.1.1 |
nbsAddrIndexAn index from 1 to 8K. * (number of devices+1)ro INTEGER .1.3.6.1.4.1.629.2.8.1.1.1 |
nbsMACAddressThe MAC Address where the packet came fromrw OCTET STRING .1.3.6.1.4.1.629.2.8.1.1.3 |
nbsAddrPortThe source port in this devicerw INTEGER .1.3.6.1.4.1.629.2.8.1.1.4 |
nbsAddrStaticStatic indecation bit in the MAC Address entryrw Enumeration .1.3.6.1.4.1.629.2.8.1.1.5 |
nbsAddrForwardToThis indicates whether to forward frames destined
to this MAC address to all ports or only to the
destination portrw Enumeration .1.3.6.1.4.1.629.2.8.1.1.6 |
nbsSlotsTable OBJECT IDENTIFIER .1.3.6.1.4.1.629.2.9 |
nbsCardsTabledefine the Cards' Types
(for NH5500 and other GSWITCH HUBS..). SEQUENCE OF NbsCardsEntry .1.3.6.1.4.1.629.2.9.1 |
nbsCardsEntryThe entries (records) NbsCardsEntry .1.3.6.1.4.1.629.2.9.1.1 |
nbsCardIndexThe slot#. An index from 1 to The number of slots.ro INTEGER .1.3.6.1.4.1.629.2.9.1.1.1 |
nbsCardTypeThe Card's type:
copper20Ethernet10or100Base (2) - Slot including 20 fast copper 10/100 MBps Ports;
copper40Ethernet10Base (3) - Slot including 40 normal copper 10 MBps Ports;
fibre10Ethernet100Base (6) - Slot including 10 fast fibre optic 100 MBps Ports;
universal (9) - Slot including Uplink Modules of the different types;ro Enumeration .1.3.6.1.4.1.629.2.9.1.1.2 |
nbsNMacRecordsThe number of Records (addresses) in the MAC tablero INTEGER .1.3.6.1.4.1.629.2.10 |
nbsMacFirstGapThe index of the first gap (empty record) in the MAC tablero INTEGER .1.3.6.1.4.1.629.2.11 |
nbsPALPorts OBJECT IDENTIFIER .1.3.6.1.4.1.629.2.12 |
nbsPALPortsTableTable contain data only for
the existing PAL modules ports. SEQUENCE OF NbsPALPortsEntry .1.3.6.1.4.1.629.2.12.1 |
nbsPALPortsEntryThe PAL Optic Power Ports status. NbsPALPortsEntry .1.3.6.1.4.1.629.2.12.1.1 |
nbsPALPortIndexThe number of the real existing PAL port.
(the same as [ifIndex] in the MIB-II).ro INTEGER .1.3.6.1.4.1.629.2.12.1.1.1 |
nbsPALPortOpticPowerPAL Port Optic Power status.
(interval: 0 - 15)ro INTEGER .1.3.6.1.4.1.629.2.12.1.1.2 |