NETWORTH-FASTPIPES-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for NETWORTH-FASTPIPES-MIB.
61
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
61 total| Object Name |
|---|
networth OBJECT IDENTIFIER .1.3.6.1.4.1.215 |
RFC-1215 Unknown .1.3.6.1.4.1.215 |
nwfpPowerSupplyDownA nwfpPowerSupplyDown trap signifies that a system power supply has
stopped running. This trap will only be generated when the system power
supply changes its operational state from up to down due to internal
failure. TRAP-TYPE .1.3.6.1.4.1.215.0.11 |
nwfpPowerSupplyUpA nwfpPowerSupplyUp trap signifies that a system power supply is up
and running. This trap will only be generated when the system power
supply changes its operational state from down to up. TRAP-TYPE .1.3.6.1.4.1.215.0.12 |
nwfpfanDownA nwfpfanDown trap signifies that a system fan has stopped running.
This trap will only be generated when the system fan changes its
operational state from up to down due to internal failure. TRAP-TYPE .1.3.6.1.4.1.215.0.13 |
nwfpfanUpA nwfpfanUp trap signifies that a system fan is up and running.
This trap will only be generated when the system fan changes its
operational state from down to up. TRAP-TYPE .1.3.6.1.4.1.215.0.14 |
networthProducts OBJECT IDENTIFIER .1.3.6.1.4.1.215.1 |
networthInternetworking OBJECT IDENTIFIER .1.3.6.1.4.1.215.1.2 |
nwFastPipes OBJECT IDENTIFIER .1.3.6.1.4.1.215.1.2.2 |
nwfpProductTypeThe switch product type based on whether the switch is modular or
nonmodular, has one of four uplinks or none, and has routing or not.
The product types are:
Modular with no Uplink and no Routing
Modular with no Uplink and Routing
Modular with FDDI Uplink and no Routing
Modular with FDDI Uplink and Routing
Modular with ATM Uplink and no Routing
Modular with ATM Uplink and Routing
Modular with 100BT Uplink and no Routing
Modular with 100BT Uplink and Routing
Modular with 100VG Uplink and no Routing
Modular with 100VG Uplink and Routing
NonModular with no Uplink and no Routing
NonModular with no Uplink and Routing
NonModular with FDDI Uplink and no Routing
NonModular with FDDI Uplink and Routing
NonModular with ATM Uplink and no Routing
NonModular with ATM Uplink and Routing
NonModular with 100BT Uplink and no Routing
NonModular with 100BT Uplink and Routing
NonModular with 100VG Uplink and no Routing
NonModular with 100VG Uplink and Routingro DisplayString .1.3.6.1.4.1.215.1.2.2.1 |
nwfpResetSetting this object to reset(2) will cause the FastPipes to
perform a hardware reset within approximately 5 seconds.
Setting this object to reset-and-erase-config(3) will cause
the switch to perform a hardware reset to all config values stored
in nvram to default values within approximately 5 seconds.
Setting this object to no-reset(1) will have no effect. The
value no-reset(1) will be returned whenever this object is
retrieved.
The primary purpose for including this variable in the FastPipes
MIB is to allow SNMP managers to modify the operational mode
of the FastPipes.rw Enumeration .1.3.6.1.4.1.215.1.2.2.2 |
nwfpCurrentSoftwareVersionThe version of software currently running on the switch. The version
is specified in ASCII formatro DisplayString .1.3.6.1.4.1.215.1.2.2.3 |
nwfpFutureSoftwareVersionThe version of software the switch will run after the next reset.
If this variable is different than nwfpCurrentSoftwareVersion,
the switch will request a download for the new software the next
time the switch is reset (as in setting the variable nwfpReset or
power cycling the unit). The version should be specified
as an ASCII string.rw DisplayString .1.3.6.1.4.1.215.1.2.2.4 |
nwfpTFTPServerIPAddressThe IP address of the TFTP Server to which the FastPipes will send
its next TFTP request.rw IpAddress .1.3.6.1.4.1.215.1.2.2.5 |
nwfpCurrentUplinkSoftwareVersThe version of software currently running on the switch's Uplink
Card. The version is an ASCI string of the form.ro DisplayString .1.3.6.1.4.1.215.1.2.2.6 |
nwfpFutureUplinkSoftwareVersThe version of software the switch's Uplink Card will run after the
next reset. If this variable is different than
nwfpCurrentUplinkSoftwareVers, the switch will request a download
for the new software the next time the switch is reset (as in setting
the variable nwfpReset or power cycling the unit). The version
should be specified as an ASCII string.rw DisplayString .1.3.6.1.4.1.215.1.2.2.7 |
nwfpLastFailureReasonThe last error that caused a switch failure. A value of zero (0)
indicates that there has not been a switch failure since the nvram
was last erased.
A non-zero value indicates the reason for the last switch failure.
A normal switch reset or power cycle will not change the value of
this variable (it will still indicate the reason for the last
known failure).ro INTEGER .1.3.6.1.4.1.215.1.2.2.8 |
nwfpEEPROMVersionThe hardware EEPROM version. The string 'unknown' is returned if
the value is not known.ro DisplayString .1.3.6.1.4.1.215.1.2.2.9 |
nwfpManufactureDateThe hardware manufacture date. The string 'unknown' is returned if
the value is not known.ro DisplayString .1.3.6.1.4.1.215.1.2.2.10 |
nwfpAuthErrIPaddressThe IP address of the device that sent the SNMP packet that caused
an authentication error trap to be issued by the switch.ro IpAddress .1.3.6.1.4.1.215.1.2.2.11 |
nwfpRAMsizeThe size of RAM.ro Enumeration .1.3.6.1.4.1.215.1.2.2.12 |
nwfpEthernetTableA table of ethernet-port-specific information for the FastPipes.
This table augments the Ethernet RFC1398 MIB. SEQUENCE OF NwfpEthernetEntry .1.3.6.1.4.1.215.1.2.2.13 |
nwfpEthernetEntryA list of information for every ethernet interface. NwfpEthernetEntry .1.3.6.1.4.1.215.1.2.2.13.1 |
nwfpIfIndexEthernet interface number that corresponds to the ifIndex value
in mib-2.ro INTEGER .1.3.6.1.4.1.215.1.2.2.13.1.1 |
nwfpBOOTPrequestFlagThis flag determines whether this ethernet interface will send a BOOTP
request. When booting, the FastPipes will broadcast a BOOTP request
from the lowest ethernet interface with this value enabled(1). If that
BOOTP request fails, the FastPipes will broadcast another BOOTP request
from the next ethernet interface with this value enabled(1). At least
one ethernet interface must have this value enabled(1) or BOOTP will
not work.rw Enumeration .1.3.6.1.4.1.215.1.2.2.13.1.2 |
nwfpBOOTPServerIPAddressThe IP address of the BOOTP Server that responded to the FastPipes's
BOOTP request.ro IpAddress .1.3.6.1.4.1.215.1.2.2.18 |
nwfpBOOTPEthernetIFThe Ethernet interface number that successfully completed the BOOTP
interaction.ro INTEGER .1.3.6.1.4.1.215.1.2.2.19 |
nwfpUplinkSoftwarePathThe path to the switch software file. Following this path will reveal
the actual version of the file.rw DisplayString .1.3.6.1.4.1.215.1.2.2.20 |
nwfpSerialNumberThe hardware serial number.ro DisplayString .1.3.6.1.4.1.215.1.2.2.21 |
nwfpConfigurationThis object returns the type of base module that is being queried.ro Enumeration .1.3.6.1.4.1.215.1.2.2.22 |
nwfpUpLinkEEPROMVersionThe uplink EEPROM version. The string 'unknown' is returned
if the value is not known.ro DisplayString .1.3.6.1.4.1.215.1.2.2.23 |
nwfpUpLinkManufactureDateThe uplink manufacture date. The string 'unknown' is returned if
the value is not known.ro DisplayString .1.3.6.1.4.1.215.1.2.2.24 |
nwfpUpLinkSerialNumberThe uplink serial number.ro DisplayString .1.3.6.1.4.1.215.1.2.2.25 |
nwfpUpLinkConfigurationThis object returns the type of HSSP (Uplink) module that is in the
base unit.ro Enumeration .1.3.6.1.4.1.215.1.2.2.26 |
nwfpSoftwarePathThe path to the switch software file. Following this path will
reveal the actual version of the file.rw DisplayString .1.3.6.1.4.1.215.1.2.2.27 |
nwfpCurrentBooterSoftwareVersionThe version of Booter software currently running on the switch.
The version is an ASCII string.ro DisplayString .1.3.6.1.4.1.215.1.2.2.28 |
nwfpFutureBooterSoftwareVersionThe version of Booter software the switch will run after the next reset.
If this variable is different than nwfpCurrentSoftwareVersion,
the switch will request a download for the new software the next
time the switch is reset (as in setting the variable nwfpReset or
power cycling the unit). The version is an ASCII string.rw DisplayString .1.3.6.1.4.1.215.1.2.2.29 |
nwfpBooterSoftwarePathThe path to the Booter software file. Following this path will
reveal the actual version of the file.rw DisplayString .1.3.6.1.4.1.215.1.2.2.30 |
nwfpSaveConfigThis object allows the user to permanently save configuration parameters
into the NVRAM of a managed device. It can only be written with
save-all(2). Writing this object with config-info-saved(1) has no effect.
Setting this object to save-all(2) will save all configuration info
changed into the NVRAM.
Reading this object will normally return config-info-saved(1) if the
previous save operation is successful. It will return the value set when
the previous set operation failed.rw Enumeration .1.3.6.1.4.1.215.1.2.2.31 |
nwfpFddiIPFragWhen on(2), the FastPipes FDDI Uplink will perform IP fragmentation.
When off(1), IP fragmentation is not done and FDDI frames containing
IP information that exceed the Ethernet maximum frame size will
be dropped. Default mode is on(2).rw Enumeration .1.3.6.1.4.1.215.1.2.2.32 |
nwfpFddiToEthIPTransThis attribute defines how FDDI frames containing IP packets get
translated into Ethernet frames. When automatic(3) mode is selected,
then FDDI frames are translated either in 802.3 RAW or ethernet-ii frames,
depending on the FDDI frame format (FDDI SNAP frames are translated into
ethernet-ii frames and FDDI 802.2 frames are translated into 802.3 RAW
frames). When ethernet-802-3-RAW(2) mode is selected, all FDDI frames are
translated into 802.3 RAW frames. When ethernet-ii(1) mode is selected,
all FDDI frames are translated into ethernet-ii frames. Default mode is
automatic(3).rw Enumeration .1.3.6.1.4.1.215.1.2.2.33 |
nwfpFddiSNAPToEthIPXTransThis attribute defines how incoming FDDI SNAP frames containing IPX
information are translated into ethernet frames. When ethernet-ii(1) mode
is selected, then, the incoming FDDI SNAP frames are translated into
ethernet-ii frames. When ieee8022snap(2) is selected, then the incoming
FDDI SNAP frames are translated into ethernet SNAP frames. Default mode
is ethernet-ii(1).rw Enumeration .1.3.6.1.4.1.215.1.2.2.34 |
nwfpFddi8022ToEthIPXTransThis attribute defines how incoming FDDI 802.2 frames containing IPX
information are translated into ethernet frames. When the 802-3-Raw(1)
mode is selected, then, incoming FDDI 802.2 frames are translated into
802.3 Raw format. When the 802-2(2) format is selected, then incoming
FDDI 802.2 frames are translated into 802.2 frames. Default mode is
802-3-Raw(1).rw Enumeration .1.3.6.1.4.1.215.1.2.2.35 |
nwfpFddiLocTrafFilteringDefines whether or not traffic local to the FDDI network the FastPipes
is connected to is filtered or not (i.e not forwarded to the FastPipes
switch process). The default is on(2)rw Enumeration .1.3.6.1.4.1.215.1.2.2.36 |
nwfpSpanningTreeEnableWhen set to enable(1), the FastPipes will run the Spanning Tree Protocol
(STP). When set to disable(2), the FastPipes will not run STP. Default
value is enable(1).rw Enumeration .1.3.6.1.4.1.215.1.2.2.37 |
nwfpTpFdbMaxSizeGives the maximum number of entries that the forwarding data base may
havero INTEGER .1.3.6.1.4.1.215.1.2.2.38 |
nwfpTpFdbNbEntriesUsedGives the number of entries currently existing in the forwarding data
base.ro INTEGER .1.3.6.1.4.1.215.1.2.2.39 |
nwfpEthIPX8023ToFddiTransWhen set to ieee8022(2), an LLC header is added to the FDDI
frame, between the MAC header and the IPX header. When set to
ethernet-802-3-RAW(1), 802.3 raw packet format will be used in performing
packet translation. The default mode is ethernet-802-3-RAW(1).rw Enumeration .1.3.6.1.4.1.215.1.2.2.40 |
nwfpPowerSupplyNumberThe number of system power supplies installed (regardless of their
current state) in the FastPipe product.ro INTEGER .1.3.6.1.4.1.215.1.2.2.41 |
nwfpPowerSupplyTableA table of system power supply specific information for the FastPipes. SEQUENCE OF NwfpPowerSupplyEntry .1.3.6.1.4.1.215.1.2.2.42 |
nwfpPowerSupplyEntryA list of information for every power supply installed NwfpPowerSupplyEntry .1.3.6.1.4.1.215.1.2.2.42.1 |
nwfpPowerSupplyIndexA unique value for each power supply.ro INTEGER .1.3.6.1.4.1.215.1.2.2.42.1.1 |
nwfpPowerSupplyStatusThe status of the power supply. The value good(1) is returned if the
power supply identified by nwfpPowerSupplyIndex is running properly. The
value bad(2) is returned if the power supply identified by nwfpPowerSupplyIndex
has failed to operate properly but has been inserted into the slot. This
will include an inserted power supply with no power. The value na(3) is
returned if the power supply has not been inserted into the slot.ro Enumeration .1.3.6.1.4.1.215.1.2.2.42.1.2 |
nwfpFanNumberThe number of system fans installed (regardless of their current state)
in the FastPipe product.ro INTEGER .1.3.6.1.4.1.215.1.2.2.43 |
nwfpFanTableA table of system fan specific information for the FastPipes. SEQUENCE OF NwfpFanEntry .1.3.6.1.4.1.215.1.2.2.44 |
nwfpFanEntryA list of information for every fans installed NwfpFanEntry .1.3.6.1.4.1.215.1.2.2.44.1 |
nwfpFanIndexA unique value for each fan. Its value ranges between 1 and the value
of nwfpFanNumber.ro INTEGER .1.3.6.1.4.1.215.1.2.2.44.1.1 |
nwfpFanStatusThe status of the system fan. The value good(1) is returned if the fan
identified by nwfpFanIndex is running properly. The value bad(2) is
returned if the fan identified by nwfpFanIndex has failed to operate
properly.ro Enumeration .1.3.6.1.4.1.215.1.2.2.44.1.2 |
nwfpMonitorPortThe index value of a port which will receive all traffic from
the ports specified in the nwfpMonitorSource bitmask. Acceptable
values are 1 to Max port number.rw INTEGER .1.3.6.1.4.1.215.1.2.2.45 |
nwfpMonitorSourceA bitmask of the port numbers to monitor. This bitmask (which
must not include the port number used for nwfpMonitorPort) specifies
which ports are to be monitored. Traffic sent to the ports specified
in this bitmask will also be sent to nwfpMonitorPort. Bit 0
in the bitmask corresponds to port 1, bit 1 corresponds to port 2,
and so on.
The greater the number of ports specified in the bitmask,
the lower the integrity of information to the monitoring port. i.e.
the more ports monitored, the greater the probability of lost data.rw INTEGER .1.3.6.1.4.1.215.1.2.2.46 |
nwfpMonitorPortStatusStatus value of RMON monitoring. When set to disabled the port
specified in nwfpMonitorPort will not receive monitored data. When set to
enabled the port will begin recieving data from the ports
specified in nwfpMonitorSource.rw Enumeration .1.3.6.1.4.1.215.1.2.2.47 |