NETAPP-MIB
AI MIB Summary
The NETAPP-MIB module provides SNMPv2 access to NetApp storage array entities, enabling the monitoring of aggregate health, volume status, disk pool utilization, and controller performance metrics. It facilitates the collection of specific operational data such as system uptime, interface statistics, and storage capacity thresholds for centralized network management.
The mib module for NetApp SNMPv2 entities
Main OID:
netappModuleId.1.3.6.1.6.3.789
2950
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
2950 total| Object Name |
|---|
netapp OBJECT IDENTIFIER .1.3.6.1.4.1.789 |
userDefinedA polling-style trap built using the 'snmp traps' command on the filer. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.2 |
dhmNoticeDegradedIODisk Health Monitor - Reported a Disk Degraded-I/O Event NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.6 |
dhmNoticePFAEventDisk Health Monitor - Reported a Disk Predictive-Failure Event NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.7 |
emergencyTrapA user-defined trap indicating an extremely urgent situation, usually indicating that the system has failed and is shutting down. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.11 |
alertTrapA user-defined trap indicating a condition that should be corrected immediately, such as a failed disk. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.12 |
criticalTrapA user-defined trap indicating a critical condition, such as a hard device error. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.13 |
errorTrapA user-defined trap indicating an error condition, such as a mistake in a configuration file. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.14 |
warningTrapA user-defined trap indicating a condition which is not an error, but which may require special handling. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.15 |
notificationTrapA user-defined trap meant to provide notification, such as an hourly uptime message. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.16 |
informationalTrapA user-defined trap used for informational purposes. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.17 |
dbgTrapA user-defined trap used for debugging purposes. This trap was previously mis-documented as being trap number 17, with the name debugTrap. It has always, actually, been trap 18. The name change is to avoid issues with environments that already have a record for debugTrap. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.18 |
diskFailedShutdownSystem is shutting down because the system has been running in degraded mode for 24 hours. The trap includes a string describing the failed disk. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.21 |
diskFailedOne or more disks failed. The trap includes a string describing the failed disk(s). NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.22 |
diskRepairedThe failed disks have been repaired. This trap is a placeholder - it is not currently sent by Data ONTAP. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.26 |
fanFailureShutdownCritical chassis or cpu fans have failed and the system is shutting down. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.31 |
fanFailedOne or more chassis fans failed. The trap includes a string describing the failed fan(s). NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.33 |
fanWarningOne or more chassis or cpu fans are in warning state. The trap includes a string describing the fan(s) in the warning state. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.35 |
fanRepairedAll fans are repaired. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.36 |
powerSupplyFailureShutdownCritical power supplies or power rails failed and the system is shutting down. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.41 |
powerSupplyFailedOne or more redundant power supplies failed. Include in the trap a string describing the failed power supply(ies). NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.43 |
powerSupplyWarningOne or more power supplies or power rails in warning state. Include in the trap a string describing the power supply(ies) or the power rail(s) in the warning state. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.45 |
powerSupplyRepairedPreviously-failed power supplies or power rails have been repaired. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.46 |
cpuTooBusyCPU utilization exceeds 90%. This trap is not enabled by default. To enable this trap set the registry entry options.monitor.cpu.enable to on. Note that as the threshold for this trap is checked once a minute it is possible to receive multiple instances of this trap in a short time. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.55 |
cpuOkCPU utilization has dropped back below 90%. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.56 |
nvramBatteryDischargedThe NVRAM battery is fully discharged. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.62 |
nvramBatteryLowThe charge in the NVRAM battery is low. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.63 |
clusterNodeFailedA node in a Cluster FailOver configuration failed. Its partner will assume service for the failed node. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.72 |
clusterNodeTakenOverThe partner has taken over for a failed cluster node. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.75 |
clusterNodeRepairedA cluster node has resumed operation. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.76 |
clusterNodeRepairingA cluster node has rebooted, and a giveback has started. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.77 |
volumeFullAt least one volume is more than 98% full. The string sent with the trap gives the name of the volume or volumes which exceed the volumeFull or volumeNearlyFull thresholds NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.82 |
volumeNearlyFullAt least one volume is more than 95% full. The string sent with the trap gives the name of the volume or volumes which exceed the volumeFull or volumeNearlyFull thresholds NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.85 |
volumeRepairedAll volumes are now under 95% full. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.86 |
volumesStillFullAt least one volume that was full or nearly full is now OK, but more volumes still exceed the volumeNearlyFull or volumeFull thresholds. This trap is generally sent within a short time of when a volume becomes OK, though if two volumes become OK within this timeframe, only one trap is sent. The string sent with the trap gives the name of the volume or volumes which still exceed the volumeFull or volumeNearlyFull thresholds. It does not send the name of any volume that is OK. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.87 |
overTempShutdownSystem temperature is too high to continue operating. The system is shutting down. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.91 |
overTempSystem temperature is too high and in the warning level. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.95 |
overTempRepairedSystem temperature has returned to an acceptable value. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.96 |
shelfFaultA disk storage shelf reported a fault, probably due to a problem with drive placement, fans, power, or temperature. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.103 |
shelfRepairedA previously-reported shelf fault is now corrected. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.106 |
globalStatusNonRecoverableThe appliance's overall status changed to 'nonRecoverable', indicating a problem so severe that the appliance is shutting down. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.111 |
globalStatusCriticalThe appliance's overall status changed to 'critical', indicating a problem that needs immediate attention. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.113 |
globalStatusNonCriticalThe appliance's overall status changed to 'nonCritical', indicating a problem that needs attention. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.115 |
globalStatusOkThe appliance's overall status returned to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.116 |
softQuotaExceededA user has exceeded their soft quota limit. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.126 |
softQuotaNormalA user is safely back under their soft quota limit. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.127 |
autosupportSendErrorUnable to send autosupport. The trap includes a string describing the reason for the failure. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.134 |
autosupportConfigurationErrorAutosupport may be configured incorrectly. The trap includes a string describing the mis-configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.135 |
autosupportSentAutosupport was sent successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.136 |
upsLinePowerOffUPS: Input line power has failed and UPS is now on battery. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.142 |
upsBatteryCriticalUPS: Battery is nearly exhausted, starting graceful shutdown. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.143 |
upsShuttingDownUPS: Shutting down now: Time left on battery is exhuasted. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.144 |
upsBatteryWarningUPS: Warning: Time left on battery is getting critical. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.145 |
upsLinePowerRestoredUPS: Input line power has been restored and UPS is now off battery. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.146 |
appEmergencyThe application encountered an extremely urgent situation and requires an immediate response. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.151 |
appAlertThe application is in a condition that should be corrected immediately. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.152 |
appCriticalThe application encountered a critical condition. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.153 |
appErrorThe application encountered an error condition. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.154 |
appWarningThe application is in a condition which is not an error, but which may require special handling. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.155 |
appNoticeThe application is notifing of a certain event. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.156 |
appInfoThe application's message is meant for informational purposes. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.157 |
appTrapThe application requires to be debugged. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.158 |
alfFilewrapThe internal audit file has wrapped. You are currently losing event records. Warning the user. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.162 |
alfFileSavedThe internal audit log has been autosaved to an external evt file. Notifying the user. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.166 |
alfFileNearlyFullThe internal audit log file is nearly full. The file is going to wrap. Notifying the user. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.167 |
quotaExceededOne of the quota limits has been exceeded. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Quota Event: status=exceeded, type={hard|soft|threshold}, user={username}, volume={volume}, limit_item={files|disk}, limit_value={#files|#kilobytes} [ , treeid={tree-id} ] [ , vfiler={vfiler} ] An example of a complete message would be: Quota Event: status=exceeded, type=soft, user=admin, volume=vol1, limit_item=disk, limit_value=1000000, treeid=8 Additional key=value items may, in the future, be appended to this message. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.176 |
quotaNormalOne of the quota limits has gone back down to a normal level. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Quota Event: status=normal, type={hard|soft|threshold}, user={username}, volume={volume}, limit_item={files|disk}, limit_value={#files|#kilobytes} [ , treeid={tree-id} ] [ , vfiler={vfiler} ] An example of a complete message would be: Quota Event: status=normal, type=soft, user=admin, volume=vol1, limit_item=disk, limit_value=1000000, treeid=8 Additional key=value items may, in the future, be appended to this message. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.177 |
waflDirFullThe directory has been filled to its limit NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.187 |
eccSummaryMemory ECC: number of new correctable ECC errors NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.192 |
eccMaskedMemory ECC: High frequency of ECC errors NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.195 |
ftpdErrorFtp daemon: service stopped NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.204 |
ftpdMaxConnNoticeFtp daemon: number of connections hits maximum number NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.206 |
ftpdMaxConnThresholdNoticeFtp daemon: number of connections nearly hits maximum number NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.216 |
scsitgtFCPLinkBreakSCSI Target: Link Break on FCP adapter NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.222 |
scsitgtPartnerPathMisconfiguredSCSI Target: FCP Partner Path Misconfigured NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.224 |
scsitgtThrottleNoticeSCSI Target: Throttle limit event notification NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.226 |
vifPrimaryLinkFailedVif: The primary Interface on a Single mode vif has failed NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.237 |
vifAllLinksFailedVif: All the links of the vif have failed NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.238 |
vfStoppedA vFiler has stopped. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.245 |
vfStartedA vFiler has started. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.246 |
vscanVirusDetectedErrorVScan: A virus scanner has detected a virus on the Filer NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.254 |
vscanDisConnectionVScan: A virus scanner has dropped its connection from the Filer NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.255 |
vscanConfigurationChangeVScan: There has been a change to the vscan configuration NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.256 |
vscanConnectionVScan: A virus scanner has made a connection to the Filer NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.257 |
vscanServerUpgradeVScan: The Vscan server has been upgraded NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.266 |
volumeRestrictedByMirrorBigIoA volume that experienced a medium error during reconstruction is restricted and marked wafl-inconsistent, but starting wafliron has failed. This trap is issued to alert operator that a volume is not accessible and wafliron must be started to allow access to it. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.272 |
volumeInconsistentUmountThis trap is issued when we unmount a volume due to an inconsistency. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.274 |
volumeStateChangedVolume is being taken offline or being restricted. The string sent with trap specifies name of affected volume and its state. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.275 |
volumeOnlineVolume is online now. The string sent with trap specifies name of volume which is online now. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.276 |
rmcCardNeedsReplacementRemote Management Controller card needs replacement. The trap includes a string specifying the reason for replacement NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.283 |
rmcCardMissingCablesRemote Management Controller card is missing its internal cable, or LAN cable or power supply cable. The trap includes a string specifing the missing component. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.284 |
volumeRemoteUnreachableLocal volume encountered an error while communicating to remote volume. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.294 |
volumeRemoteOkThe communication between remote volume and local volume returned to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.296 |
volumeRemoteRestoredThe data on remote volume has been fully restored to local volume. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.297 |
volumeRemoteRestoreBeginThe data on remote volume has started being restored to local volume by Restore-on-Demand. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.298 |
volumeRestrictedRootConflictVolume is restricted due to a root volume conflict. The string sent with trap specifies name of conflicting volume which is being restricted. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.304 |
volumeOfflineTooBigVolume can not be brought online because its raw size is larger than maximum allowed size. The string sent with trap specifies name of affected volume and its raw size, and maximum allowed size. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.314 |
volumeOfflineVolume is being taken offline. The string sent with trap specifies name of affected volume and reason for being taken offline. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.324 |
volumeRestrictedVolume is being restricted. The string sent with trap specifies name of affected volume and reason for being restricted. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.334 |
volumeDegradedDirtyVolume is degraded and has dirty parity. WAFL_check must be run on this volume before it can be brought online. The string sent with trap specifies name of affected volume. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.344 |
volumeErrorThis trap is issued when a volume can not be brought online due to an error. The string sent with trap specifies name of affected volume and error description. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.354 |
volumeSelectedRootConflictThis trap is issued when multiple root volumes are detected at boot time and one is selected as the root by default. The string sent with the trap specifies the name of the selected volume and the reason. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.356 |
snapmirrorSyncFailedSynchronous SnapMirror failed and went into asynchronous mode. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.364 |
snapmirrorSyncOkSynchronous SnapMirror went into synchronous mode. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.366 |
chassisTemperatureShutdownThe chassis temperature is extreme. The appliance has initiated a shutdown to protect itself. The operating environment should be monitored and corrected before restarting the appliance. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.371 |
chassisTemperatureWarningThe chassis temperature is either too high or too low. The temperature should be monitored and, if possible, corrected. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.372 |
chassisTemperatureUnknownThe chassis temperature is unknown, because reading can't be obtained from the chassis temperature sensor. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.375 |
chassisTemperatureOkThe chassis temperature is OK. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.376 |
chassisCPUFanStoppedOne or more CPU fans have stopped. The appliance has initiated a shutdown to protect itself. A new motherboard may be required to correct the fan. Contact customer support for direction. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.381 |
chassisCPUFanSlowA CPU fan is spinning too slowly. A new motherboard may be required to correct the fan. Contact customer support for direction. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.383 |
chassisCPUFanOkAll CPU fan(s) are properly functioning. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.386 |
chassisPowerSuppliesFailedMultiple chassis power supplies failed. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.391 |
chassisPowerSupplyDegradedOne or more chassis power supplies are degraded. A description of the degraded state has been logged to the console and message log file. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.392 |
chassisPowerSupplyFailedOne chassis power supply failed. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.393 |
chassisPowerSupplyRemovedOne or more chassis power supplies are removed. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.394 |
chassisPowerSupplyOffOne or more chassis power supplies are off. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.395 |
chassisPowerSuppliesOkThe chassis power supplies are all functioning properly. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.396 |
chassisPowerSupplyOkThis chassis power supply is functioning properly. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.397 |
chassisPowerDegradedThe power within the chassis is degraded. A description of the degraded state has been logged to the console and message log file. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.403 |
chassisPowerOkThe power within the chassis is functioning properly. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.406 |
chassisFanDegradedA chassis fan has been degraded. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.412 |
chassisFanRemovedA chassis fan FRU has been removed. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.413 |
chassisFanStoppedOne or more chassis fans have stopped. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.414 |
chassisFanWarningOne or more chassis fans is spinning slowly or too fast. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.415 |
chassisFanOkAll chassis fans are functioning properly. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.416 |
writeVerificationFailedA write has failed a verification test on a SnapValidator enabled volume. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.424 |
prefDCDisconnectAll connections to domain controllers in the preferred domain controllers list have been lost. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.434 |
domainControllerDisconnectA CIFS domain controller connection to the filer has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.435 |
dcPasswdChangeFailedAn attempt to change the filer's password with the domain controller has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.436 |
domainControllerConnectedA CIFS domain controller connection to the filer has been established. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.437 |
plexFailedThis trap is issued when one plex of a mirrored traditional volume or aggregate is failed. The string sent with this trap specifies name of affected plex or mirrored traditional volume or aggregate. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.444 |
plexOfflineThis trap is issued when a plex becomes offline. The string sent with this trap specifies name of affected plex or mirrored traditional volume or aggregate. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.454 |
shelfSESElectronicsFailedOne or more of the enclosure services devices in a disk shelf has failed. Some shelf designs combine the enclosure monitoring hardware function into the module that provides the storage interface to the shelf. A failure in the enclosure monitoring section of these combined modules does not necessarily indicate a failure in disk or loop or bus operation, which may be able to continue. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.464 |
shelfSESElectronicsInfoA previously reported failure of an enclosure services device in a disk shelf has been corrected, or the device has reported information that does not necessarily require customer action. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.467 |
shelfIFModuleFailedOne or more of the storage interface modules in a disk shelf has failed. Some shelf designs combine the enclosure monitoring hardware function into the module that operates the fibre channel loop or SCSI in the shelf. This failure is of the storage interface itself, not a failure of the enclosure monitoring, which may be able to continue. This failure may make one or more disks in the shelf or in the loop or bus unavailable. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.473 |
shelfIFModuleWarningOne or more of the storage interface modules in a disk shelf has a warning condition. Some shelf designs combine the enclosure monitoring hardware function into the module that operates the fibre channel loop or SCSI in the shelf. This warning condition is of the storage interface itself, not a failure of the enclosure monitoring, which may be able to continue. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.475 |
shelfIFModuleInfoA previously reported failure of a disk shelf interface module has been corrected, or the module has reported information that does not necessarily require customer action. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.477 |
maxDirSizeAlertA directory has reached its maxdirsize limit. Either increase the maxdirsize or clean up the directory. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.482 |
maxDirSizeWarningA directory is getting close to its maxdirsize limit. Either increase the maxdirsize or clean up the directory. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.485 |
cifsStatsExhaustMemCtrlBlkA request for a CIFS control block can not be granted. All control blocks are in use. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.497 |
chassisPSRemovedxMinShutdownPower Supply Unit is removed from the system. System will be shutdown in x minutes if it is not put back. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.501 |
chassisPSUsMismatchPower Supply Units in the system are of different type. Please replace them with correct Power Supply Units. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.505 |
chassisFanFailxMinShutdownMultiple chassis fan failure. System will shut down in a few minutes if not corrected. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.511 |
chassisPSUwrongInputPower Supply Unit (PSU) in the system is connected to an incompatible external power source. Please change the power source being used or replace the PSU with one that matches the current power source. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.515 |
powerSupplyFanFailxMinShutdownMultiple power supply fans failure. System will shut down in a few minutes if not corrected. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.521 |
remoteSystemMgtAlertsystem remote management detected a system down event. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Remote Management Event: type={system_down|system_up|test|keep_alive}, severity={alert|warning|notice|normal|debug|info}, event={post_error|watchdog_reset|power_loss|abnormal_reboot}, key=value An example of a complete message would be: Remote Management Event: type=system_down, severity=alert, event=watchdog_reset, ss=16bytes Additional key=value items may, in the future, be appended to this message. The events that would generate this trap would be: post_error: Fatal POST error on boot power_loss: Loss of power to system abnormal_reboot: l2_watchdog_reset NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.532 |
remoteSystemMgmtWarningsystem remote management detected a system down event. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Remote Management Event: type={system_down|system_up|test|keep_alive}, severity={alert|warning|notice|normal|debug|info}, event={loss-of-heartbeat}, key=value An example of a complete message would be: Remote Management Event: type=system_down, severity=warning, event=loss_of_heartbeat, ss=16bytes Additional key=value items may, in the future, be appended to this message. The events that would generate this trap would be: loss_of_heartbeat: Loss of heartbeat to the RLM. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.535 |
remoteSystemMgmtNotificationsystem remote management detected a system down event. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Remote Management Event: type={system_down|system_up|test|keep_alive}, severity={alert|warning|notice|normal|debug|info}, event={power_off_via_rlm,power_cycle_via_rlm,reset_via_rlm}, key=value An example of a complete message would be: Remote Management Event: type=system_down, severity=notice, event=power_off_via_rlm, ss=16bytes Additional key=value items may, in the future, be appended to this message. The events that would generate this trap would be: power_off_via_rlm: This indicates system power off power_cycle_via_rlm: This indicates system power cycle reset_via_rlm: This indicates system reset. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.536 |
remoteSystemMgmtPeriodicThis is a periodic keep alive from system remote management. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Remote Management Event: type={system_down|system_up|test|keep_alive}, severity={alert|warning|notice|normal|debug|info}, event={periodic_message} An example of a complete message would be: Remote Management Event: type=keep_alive, severity=info, event=periodic_message Additional key=value items may, in the future, be appended to this message. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.547 |
remotesystemMgmtTestThis is a test trap from system remote management. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Remote Management Event: type={system_down|system_up|test|keep_alive}, severity={alert|warning|notice|normal|debug|info}, event={periodic_message} An example of a complete message would be: Remote Management Event: type=test, severity=notice, event=test Additional key=value items may, in the future, be appended to this message. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.556 |
diskMultipathOneSwitchA multipathed disk is only connected to one switch. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.562 |
diskMultipathNoTakeoverMultipath disks or luns could not be detected for the partner. The node will be unable to takeover correctly. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.563 |
diskMultipathWarningSynchronous mirroring is enabled, even though disks are not multipathed. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.565 |
driveDisableErrA drive has been disabled by the shelf module due to hardware errors. If it is the only drive in the shelf that is disabled, replace the drive. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.574 |
hbaOfflineInformationA host bus adapter (HBA) port has been disabled. This state may be caused either by user command or by errors that make the interface unable to communicate with attached devices. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.587 |
lunSnapRestoreStatusStatus of the Snap Restore NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.606 |
lunCloneCreateCreated a LUN Clone NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.616 |
lunCloneSplitStartLUN Clone Split started NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.626 |
lunCloneSplitCompleteLUN Clone Split completed NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.627 |
flexCloneSplitStartFlex Clone Split started NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.636 |
flexCloneSplitCompleteFlex Clone Split completed NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.637 |
volumeCloneCreateCreated a Volume Clone NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.646 |
snapAutoDeleteSnapshot Autodeleted NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.656 |
volumeAutogrowVolume is Autogrown NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.666 |
timedTargetNotRespondingNTP Time Daemon lost contact with the configured target NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.674 |
extcacheCardErrorExternal cache card failure NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.676 |
extcacheCardOfflineExternal cache is taken offline NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.686 |
svBackupSnapWarningLimitThe remaining number of Snapshot copies for a backup schedule is below warning limit specified. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.695 |
avTrendLicenseExpiredTrend Micro antivirus license has expired NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.705 |
avTrendLicenseExpiringTrend Micro antivirus license is about to expire NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.706 |
rebootAbnormalSystem rebooted abnormally after any of the following events: event = watchdog reset, agent watchdog reset, panic, power-glitch. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.712 |
rebootNormalSystem rebooted normally after any of the following events: event = giveback, revert, WAFL check, power-on, internal reboot, internal halt, rlm system reset, operator initiated halt and reboot. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.716 |
volMoveCutoverDeferredA volume move job cannot be completed because cutover phase has been deferred. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.724 |
volMoveCutoverFailedA volume move job cannot be completed because the cutover attempt resulted in failure. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.734 |
volMoveDoneA volume move job completed successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.736 |
volMoveCutoverDeferredWaitA volume move has reached the cutover phase and is waiting for the user to trigger cutover because the user specified wait for cutover-action NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.737 |
scsibladeOutOfQuorumThe node has lost connectivitiy with the other nodes in the cluster. Both fcp and iscsi traffic have been disabled on this node. The corrective action is to reboot the node, and if the node is waiting for giveback then perform a giveback. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.741 |
scsibladeInQuorumThe node established connectivitiy with the other nodes in the cluster. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.746 |
qosMonitorMemoryMaxedQoS dynamic memory has reached its limit. Some QoS features may operate in a limited capacity. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.755 |
qosMonitorMemoryAbatedQoS dynamic memory is no longer at its limit. All QoS features will operate as normal. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.757 |
sfoAggregateRelocatedThis trap is issued when an SFO aggregate is relocated permanently from one node to another. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.767 |
avUpdateFailedThe anti-virus software update failed. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.773 |
avLicenseCheckFailedThe anti-virus software license validation failed. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.774 |
avMcAfeeProductExpiredMcAfee product has expired. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.775 |
avRemedyRemedy action taken. The file has been repaired, deleted or quarantined. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.776 |
avLicenseCheckLicense validation was successful. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.777 |
avRemedyFailureRemedy action failed. The file was not repaired, deleted or quarantined. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.783 |
avMcAfeeEngineExpiredMcAfee product has expired. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.785 |
avMcAfeeProductExpiringMcAfee product is expiring. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.786 |
av2gbFileNotScannedA file larger than 2GB is not scanned and marked as clean. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.793 |
avMcAfeeEngineExpiringMcAfee engine is expiring. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.796 |
avVirusfoundVirus found while scanning. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.802 |
avMcAfeeLicenseFailedMcAfee antivirus license activation failed. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.803 |
avDisableFailedThe anti-virus service disabling failed in the cluster. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.804 |
avDisableThe anti-virus service is disabled in the cluster. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.805 |
avMcAfeeLicenseExpiringMcAfee antivirus license is about to expire. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.806 |
avEnableThe anti-virus service is enabled in the cluster. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.807 |
avSpywareFoundSpyware found while scanning. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.812 |
avEnableFailedThe anti-virus service enabling failed in the cluster. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.813 |
avRollbackFailedThe anti-virus software rollback failed. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.814 |
avRollbackThe anti-virus software is rolled back. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.816 |
avUpdateThe anti-virus software is updated. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.817 |
snmpBusyThe SNMP server is too busy. NOTIFICATION-TYPE .1.3.6.1.4.1.789.0.824 |
netapp1 OBJECT IDENTIFIER .1.3.6.1.4.1.789.1 |
product OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.1 |
productTypeThe product type representing the target platform.ro Enumeration .1.3.6.1.4.1.789.1.1.1 |
productVersionVersion String for the Software Running on this platform.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.1.2 |
productIdThe System ID of this system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.1.3 |
productVendorThe vendor id of this system, indicating the company that has supplied the product.ro Enumeration .1.3.6.1.4.1.789.1.1.4 |
productModelThe model name of the system. Examples are FAS980 and FAS3050.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.1.5 |
productFirmwareVersionVersion string for the Firmware running on this platform.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.1.6 |
productGuiUrlThe complete URL used to access the administrative GUI for a browser-based interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.1.7 |
productApiUrlThe complete URL used to access the administrative API for a programmatic interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.1.8 |
productSerialNumThe product serial number. Returns unknown if it cannot be determined.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.1.9 |
productPartnerSerialNumThe partner's serial number, not applicable if there is no partner, and unknown if it cannot be determined.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.1.10 |
productCPUArchThe CPU architecture type of this appliancero Enumeration .1.3.6.1.4.1.789.1.1.11 |
productTrapDataThis returns a static string. This object is used as a placeholder for enterprise traps.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.1.12 |
productMachineTypeThe machine type of the system. Examples are FAS980 and FAS3050.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.1.13 |
productLicenseTableReturns information about the current list of licensed services, the type of license, and, if it is a time limited license, the expiration date. It also tells the services that are not licensed for the appliance, or if a time limited licensed service has expired. It will also return whether or not the the service was automatically enabled due to business packaging policies based on platform type.deprecated SEQUENCE OF ProductLicenseEntry .1.3.6.1.4.1.789.1.1.14 |
productLicenseEntryProvide a report of licenses.deprecated ProductLicenseEntry .1.3.6.1.4.1.789.1.1.14.1 |
productLicenseIndexIndex into the product license table.rodeprecated Integer32 .1.3.6.1.4.1.789.1.1.14.1.1 |
licenseServiceName of the service.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.1.14.1.2 |
licenseIsLicensedTrue if the service is licensed and has not expired, false otherwise.rodeprecated Enumeration .1.3.6.1.4.1.789.1.1.14.1.3 |
licenseIsExpiredTrue if the promotional/time-expiring/demo license has expired, false otherwise.rodeprecated Enumeration .1.3.6.1.4.1.789.1.1.14.1.4 |
licenseIsSiteTrue if the service is a site license, false otherwise.rodeprecated Enumeration .1.3.6.1.4.1.789.1.1.14.1.5 |
licenseExpirationTimeStampExpected expiration timestamp in seconds since January 1, 1970, if it's a promotional/time-expiring license. 0 for all other licenses.rodeprecated Integer32 .1.3.6.1.4.1.789.1.1.14.1.6 |
licenseIsAutoEnabledTrue if the service is automatically licensed (licenseIsLicensed will also be True) false otherwise.rodeprecated Enumeration .1.3.6.1.4.1.789.1.1.14.1.7 |
sysStat OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.2 |
cpu OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.2.1 |
cpuUpTimeThe time (in hundredths of a second) that the CPU has been up since the last boot.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.789.1.2.1.1 |
cpuBusyTimeThe time (in hundredths of a second) that the CPU has been doing useful work since the last boot.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.789.1.2.1.2 |
cpuBusyTimePerCentThe percent of time that the CPU has been doing useful work since the last time a client requested the cpuBusyTimePerCent.ro Integer32 .1.3.6.1.4.1.789.1.2.1.3 |
cpuIdleTimeThe time (in hundredths of a second) that the CPU has been idle since the last boot.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.789.1.2.1.4 |
cpuIdleTimePerCentThe percent of time that the CPU has been idle since the last time a client requested the cpuBusyTimePerCent.ro Integer32 .1.3.6.1.4.1.789.1.2.1.5 |
cpuCountThe number of CPUs in the system.ro Integer32 .1.3.6.1.4.1.789.1.2.1.6 |
cpuSwitchInvocationsThe number of sk_switch invocations.ro Counter32 .1.3.6.1.4.1.789.1.2.1.7 |
cpuContextSwitchesThe number of hardware context switches.ro Counter32 .1.3.6.1.4.1.789.1.2.1.8 |
cpuInterruptsThe number of interrupts during a CP.ro Counter32 .1.3.6.1.4.1.789.1.2.1.9 |
cpuNonCPInterruptsThe number of interrupts not during a CP.ro Counter32 .1.3.6.1.4.1.789.1.2.1.10 |
cpuCPInterruptPercentThe percentage of time handling CP interrupts.ro Integer32 .1.3.6.1.4.1.789.1.2.1.11 |
cpuNonCPInterruptPercentThe percentage of time handling non-cp interrupts.ro Integer32 .1.3.6.1.4.1.789.1.2.1.12 |
cpuTotalDomainSwitchesThe total number of Domain Switches.ro Counter32 .1.3.6.1.4.1.789.1.2.1.13 |
misc OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.2.2 |
miscNfsOpsThe total number of Server side NFS calls since the last bootrodeprecated Integer32 .1.3.6.1.4.1.789.1.2.2.1 |
miscNetRcvdKBThe total number of KBytes received on all the network interfaces, since the last boot.rodeprecated Integer32 .1.3.6.1.4.1.789.1.2.2.2 |
miscNetSentKBThe total number of KBytes transmitted on all the network interfaces, since the last boot.rodeprecated Integer32 .1.3.6.1.4.1.789.1.2.2.3 |
miscGlobalStatusThis indicates the overall status of the appliance. The algorithm to determine the value uses both hardware status (e.g. the number of failed fans) and volume status (e.g. number of volumes that are full). The algorithm is subject to change in future releases, but the range of values will not change.ro Enumeration .1.3.6.1.4.1.789.1.2.2.4 |
miscHighNfsOpsThe total number of Server side NFS calls since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64NfsOps instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.5 |
miscLowNfsOpsThe total number of Server side NFS calls since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64NfsOps instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.6 |
miscHighCifsOpsThe total number of Server side CIFS calls since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64CifsOps instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.7 |
miscLowCifsOpsThe total number of Server side CIFS calls since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64CifsOps instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.8 |
miscHighHttpOpsThe total number of HTTP operations received since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64HttpOps instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.9 |
miscLowHttpOpsThe total number of HTTP operations received since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64HttpOps instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.10 |
miscHighNetRcvdBytesThe total number of bytes received on all the network interfaces, since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64NetRcvdBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.11 |
miscLowNetRcvdBytesThe total number of bytes received on all the network interfaces, since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64NetRcvdBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.12 |
miscHighNetSentBytesThe total number of bytes transmitted on all the network interfaces, since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64NetSentBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.13 |
miscLowNetSentBytesThe total number of bytes transmitted on all the network interfaces, since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64NetSentBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.14 |
miscHighDiskReadBytesThe total number of bytes read from disk since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64DiskReadBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.15 |
miscLowDiskReadBytesThe total number of bytes read from disk since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64DiskReadBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.16 |
miscHighDiskWriteBytesThe total number of bytes written to disk since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64DiskWriteBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.17 |
miscLowDiskWriteBytesThe total number of bytes written to disk since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64DiskWriteBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.18 |
miscHighTapeReadBytesThe total number of bytes read from tape since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64TapeReadBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.19 |
miscLowTapeReadBytesThe total number of bytes read from tape since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64TapeReadBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.20 |
miscHighTapeWriteBytesThe total number of bytes written to tape since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64TapeWriteBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.21 |
miscLowTapeWriteBytesThe total number of bytes written to tape since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use misc64TapeWriteBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.2.2.22 |
miscCacheAgeAge in minutes of the oldest read-only blocks in the buffer cache. This indicates how fast read operations are cycling through system memory; when the appliance is reading very large files (larger than the machine's memory size), buffer cache age will be very low.ro Integer32 .1.3.6.1.4.1.789.1.2.2.23 |
miscCorrectedMachineChecksNumber of corrected machine checks since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.2.2.24 |
miscGlobalStatusMessageA string describing the global status, including a description of the condition (if any) that caused the status to be anything other than ok(3).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.2.25 |
miscWindowsSetupWizardVersionThe version number of Windows Setup Wizard required to configure the appliance. Windows Setup Wizard with a version number lower than this integer is not capable of configuring the appliance.ro Integer32 .1.3.6.1.4.1.789.1.2.2.26 |
misc64NfsOpsThe total number of Server side NFS calls since the last boot. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.2.2.27 |
misc64CifsOpsThe total number of Server side CIFS calls since the last boot. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.2.2.28 |
misc64HttpOpsThe total number of HTTP operations received since the last boot. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.2.2.29 |
misc64NetRcvdBytesThe total number of bytes received on all the network interfaces, since the last boot. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.2.2.30 |
misc64NetSentBytesThe total number of bytes transmitted on all the network interfaces, since the last boot. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.2.2.31 |
misc64DiskReadBytesThe total number of bytes read from disk since the last boot. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.2.2.32 |
misc64DiskWriteBytesThe total number of bytes written to disk since the last boot. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.2.2.33 |
misc64TapeReadBytesThe total number of bytes read from tape since the last boot. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.2.2.34 |
misc64TapeWriteBytesThe total number of bytes written to tape since the last boot. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.2.2.35 |
cf OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.2.3 |
cfSettingsClustered Failover configuration settings. The value notConfigured(1) indicates that the cluster is not licensed. The thisNodeDead(5) setting indicates that this node has been taken over.ro Enumeration .1.3.6.1.4.1.789.1.2.3.1 |
cfStateClustered Failover state.ro Enumeration .1.3.6.1.4.1.789.1.2.3.2 |
cfCannotTakeoverCauseThe reason this node cannot takeover its partnerro Enumeration .1.3.6.1.4.1.789.1.2.3.3 |
cfPartnerStatusThis is the status last returned by the Clustered Failover partner.ro Enumeration .1.3.6.1.4.1.789.1.2.3.4 |
cfPartnerLastStatusUpdateIf non-zero, the absolute time of the last update from the Clustered Failover partner.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.789.1.2.3.5 |
cfPartnerNameHostname for Clustered Failover partner.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.3.6 |
cfPartnerSysidSystem ID for Clustered Failover partner.ro Integer32 .1.3.6.1.4.1.789.1.2.3.7 |
cfInterconnectStatusThe current status of the interconnect. The partialFailure(3) status indicates that one of the links in the interconnect hardware is down.ro Enumeration .1.3.6.1.4.1.789.1.2.3.8 |
environment OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.2.4 |
envOverTemperatureAn indication of whether the hardware is currently operating outside of its recommended temperature range. The hardware will shutdown if the temperature exceeds critical thresholds.ro Enumeration .1.3.6.1.4.1.789.1.2.4.1 |
envFailedFanCountCount of the number of chassis fans which are not operating within the recommended RPM range.ro Integer32 .1.3.6.1.4.1.789.1.2.4.2 |
envFailedFanMessageText message describing the current condition of chassis fans. This is useful only if envFailedFanCount is not zero.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.4.3 |
envFailedPowerSupplyCountCount of the number of power supplies which are in degraded mode.ro Integer32 .1.3.6.1.4.1.789.1.2.4.4 |
envFailedPowerSupplyMessageText message describing the state of any power supplies which are currently degraded. This is useful only if envFailedPowerSupplyCount is not zero.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.4.5 |
nvram OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.2.5 |
nvramBatteryStatusAn indication of the current status of the NVRAM battery or batteries. Batteries which are fully or partially discharged may not fully protect the system during a crash. The end-of-life status values are based on the manufacturer's recommended life for the batteries.ro Enumeration .1.3.6.1.4.1.789.1.2.5.1 |
cp OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.2.6 |
cpTimeThe time (in hundredths of a second) since boot during which the system has had a consistency point (cp) operation in progress.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.789.1.2.6.1 |
cpFromTimerOpsThe number of consistency point operations since boot that were caused by timer.ro Counter32 .1.3.6.1.4.1.789.1.2.6.2 |
cpFromSnapshotOpsThe number of consistency point operations since boot that were caused by snapshot operation.ro Counter32 .1.3.6.1.4.1.789.1.2.6.3 |
cpFromLowWaterOpsThe number of consistency point operations since boot that were caused by low water mark.ro Counter32 .1.3.6.1.4.1.789.1.2.6.4 |
cpFromHighWaterOpsThe number of consistency point operations since boot that were caused by high water mark.ro Counter32 .1.3.6.1.4.1.789.1.2.6.5 |
cpFromLogFullOpsThe number of consistency point operations since boot that were caused by nv-log full.ro Counter32 .1.3.6.1.4.1.789.1.2.6.6 |
cpFromCpOpsThe number of back to back consistency point operations since boot.ro Counter32 .1.3.6.1.4.1.789.1.2.6.7 |
cpTotalOpsThe total number of consistency point operations since boot.ro Counter32 .1.3.6.1.4.1.789.1.2.6.8 |
cpFromFlushOpsThe number of consistency point operations since boot that were caused by flushing unlogged write data.ro Counter32 .1.3.6.1.4.1.789.1.2.6.9 |
cpFromSyncOpsThe number of consistency point operations since boot that were caused by file system sync requests.ro Counter32 .1.3.6.1.4.1.789.1.2.6.10 |
cpFromLowVbufOpsThe number of consistency point operations since boot that were caused by low virtual buffers.ro Counter32 .1.3.6.1.4.1.789.1.2.6.11 |
cpFromCpDeferredOpsThe number of back to back consistency point operations since boot that were deferred.ro Counter32 .1.3.6.1.4.1.789.1.2.6.12 |
cpFromLowDatavecsOpsThe number of consistency point operations since boot that were caused by low datavecs.ro Counter32 .1.3.6.1.4.1.789.1.2.6.13 |
autosupport OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.2.7 |
autosupportStatusAn indication of the current status of autosupport on the appliance. describes the success or failure of most recent attempts to send autosupports.ro Enumeration .1.3.6.1.4.1.789.1.2.7.1 |
autosupportStatusMessageA string describing the autosupport status, including a description of the condition (if any) that caused the status to be anything other than ok(1).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.7.2 |
autosupportSuccessfulSendsCount of the number of autosupport messages successfully sent since the last reset.ro Counter32 .1.3.6.1.4.1.789.1.2.7.3 |
autosupportFailedSendsCount of the number of autosupport messages not sent successfully since the last reset.ro Counter32 .1.3.6.1.4.1.789.1.2.7.4 |
nodeStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.2.10 |
nodeStatTableTable containing all counters in the cluster, organized on a per-node, per-category, per-object basis. SEQUENCE OF NodeStatEntry .1.3.6.1.4.1.789.1.2.10.1 |
nodeStatEntryEntry for a single counter in the cluster, on a per-node, per-category, per-object basis. NodeStatEntry .1.3.6.1.4.1.789.1.2.10.1.1 |
nodeStatNodeNode from which the counter is collected. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.10.1.1.1 |
nodeStatCategoryIndexIndex of category. Integer32 .1.3.6.1.4.1.789.1.2.10.1.1.2 |
nodeStatInstanceIndexIndex of instance on which the counter exists. Integer32 .1.3.6.1.4.1.789.1.2.10.1.1.3 |
nodeStatCounterIndexIndex of counter within this category. Integer32 .1.3.6.1.4.1.789.1.2.10.1.1.4 |
nodeStatValueThe value of the counter.ro Counter64 .1.3.6.1.4.1.789.1.2.10.1.1.5 |
nodeStatUnitsUnits for this counter. Possible values include: 'B' (bytes), 's' (seconds), 'ms' (milliseconds), 'us' (microseconds), '%' (percent), or '' (none).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.10.1.1.6 |
nodeStatDescriptionDescription of this counter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.10.1.1.7 |
nodeStatPropertiesCounter properties. Possible values include: 'average', 'rate', 'delta', 'percent', ''.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.10.1.1.8 |
nodeStatCategoryNameName of counter's category.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.10.1.1.9 |
nodeStatInstanceNameName of counter's category instance.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.10.1.1.10 |
nodeStatCounterNameName of counter within this category.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.10.1.1.11 |
nodeStatLabelsList of counter labels. Used for counter arrays of if 'counter' value is not an integer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.10.1.1.12 |
nodeStatValuesList of values. Only used to for counter arrays.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.2.10.1.1.13 |
nfs OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3 |
curNfs OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1 |
rpcServ OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.1 |
rpcCallsThe total number of RPC calls received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.1 |
rpcBadCallsThe total number of calls rejected by the RPC layer, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.2 |
rpcNullRecvsThe number of times an RPC call was not available when it was thought to be received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.3 |
rpcBadLensThe number of RPC calls received with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.4 |
rpcServXDRCallsThe number of RPC calls received whose header could not be XDR decoded, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.5 |
rcpTcpCallsThe total number of RPC calls received for the TCP protocol, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.6 |
rcpTcpBadCallsThe total number of calls rejected by the RPC layer for the TCP protocol, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.7 |
rcpTcpNullRecvsThe number of times an RPC call for the TCP protocol was not available when it was thought to be received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.8 |
rcpTcpBadLensThe number of RPC calls for the TCP protocol received with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.9 |
rcpTcpServXDRCallsThe number of RPC calls for the TCP protocol received whose header could not be XDR decoded, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.10 |
rpcUdpCallsThe total number of RPC calls received for the UDP protocol, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.11 |
rpcUdpBadCallsThe total number of calls rejected by the RPC layer for the UDP protocol, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.12 |
rpcUdpNullRecvsThe number of times an RPC call for the UDP protocol was not available when it was thought to be received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.13 |
rpcUdpBadLensThe number of RPC calls for the UDP protocol received with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.14 |
rpcUdpServXDRCallsThe number of RPC calls for the UDP protocol received whose header could not be XDR decoded, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.1.15 |
nfsServ OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2 |
nfsCallsThe total number of NFS calls received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.1 |
nfsServBadCallsThe total number of received NFS calls rejected, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.2 |
nfsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.3 |
v2Calls OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.3.1 |
v2cNullsThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.1 |
v2cGetattrsThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.2 |
v2cSetattrsThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.3 |
v2cRootsThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.4 |
v2cLookupsThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.5 |
v2cReadlinksThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.6 |
v2cReadsThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.7 |
v2cWrcachesThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.8 |
v2cWritesThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.9 |
v2cCreatesThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.10 |
v2cRemovesThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.11 |
v2cRenamesThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.12 |
v2cLinksThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.13 |
v2cSymlinksThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.14 |
v2cMkdirsThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.15 |
v2cRmdirsThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.16 |
v2cReaddirsThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.17 |
v2cStatfssThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.1.18 |
v2Percent OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.3.2 |
v2pNullsThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.1 |
v2pGetattrsThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.2 |
v2pSetattrsThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.3 |
v2pRootsThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.4 |
v2pLookupsThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.5 |
v2pReadlinksThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.6 |
v2pReadsThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.7 |
v2pWrcachesThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.8 |
v2pWritesThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.9 |
v2pCreatesThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.10 |
v2pRemovesThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.11 |
v2pRenamesThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.12 |
v2pLinksThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.13 |
v2pSymlinksThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.14 |
v2pMkdirsThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.15 |
v2pRmdirsThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.16 |
v2pReaddirsThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.17 |
v2pStatfssThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.2.18 |
v2CachedCalls OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.3.3 |
v2ccNullsThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.1 |
v2ccGetattrsThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.2 |
v2ccSetattrsThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.3 |
v2ccRootsThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.4 |
v2ccLookupsThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.5 |
v2ccReadlinksThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.6 |
v2ccReadsThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.7 |
v2ccWrcachesThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.8 |
v2ccWritesThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.9 |
v2ccCreatesThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.10 |
v2ccRemovesThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.11 |
v2ccRenamesThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.12 |
v2ccLinksThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.13 |
v2ccSymlinksThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.14 |
v2ccMkdirsThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.15 |
v2ccRmdirsThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.16 |
v2ccReaddirsThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.17 |
v2ccStatfssThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.3.3.18 |
v2CachedPerCent OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.3.4 |
v2cpNullsThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.1 |
v2cpGetattrsThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.2 |
v2cpSetattrsThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.3 |
v2cpRootsThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.4 |
v2cpLookupsThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.5 |
v2cpReadlinksThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.6 |
v2cpReadsThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.7 |
v2cpWrcachesThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.8 |
v2cpWritesThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.9 |
v2cpCreatesThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.10 |
v2cpRemovesThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.11 |
v2cpRenamesThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.12 |
v2cpLinksThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.13 |
v2cpSymlinksThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.14 |
v2cpMkdirsThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.15 |
v2cpRmdirsThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.16 |
v2cpReaddirsThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.17 |
v2cpStatfssThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.3.4.18 |
nfsV3 OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.4 |
v3Calls OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.4.1 |
v3cNullsThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.1 |
v3cGetattrsThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.2 |
v3cSetattrsThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.3 |
v3cLookupsThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.4 |
v3cAccesssThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.5 |
v3cReadlinksThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.6 |
v3cReadsThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.7 |
v3cWritesThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.8 |
v3cCreatesThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.9 |
v3cMkdirsThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.10 |
v3cSymlinksThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.11 |
v3cMknodsThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.12 |
v3cRemovesThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.13 |
v3cRmdirsThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.14 |
v3cRenamesThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.15 |
v3cLinksThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.16 |
v3cReaddirsThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.17 |
v3cReaddirPlussThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.18 |
v3cFsstatsThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.19 |
v3cFsinfosThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.20 |
v3cPathconfsThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.21 |
v3cCommitsThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.1.22 |
v3Percent OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.4.2 |
v3pNullsThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.1 |
v3pGetattrsThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.2 |
v3pSetattrsThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.3 |
v3pLookupsThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.4 |
v3pAccesssThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.5 |
v3pReadlinksThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.6 |
v3pReadsThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.7 |
v3pWritesThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.8 |
v3pCreatesThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.9 |
v3pMkdirsThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.10 |
v3pSymlinksThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.11 |
v3pMknodsThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.12 |
v3pRemovesThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.13 |
v3pRmdirsThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.14 |
v3pRenamesThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.15 |
v3pLinksThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.16 |
v3pReaddirsThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.17 |
v3pReaddirPlussThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.18 |
v3pFsstatsThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.19 |
v3pFsinfosThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.20 |
v3pPathconfsThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.21 |
v3pCommitsThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.2.22 |
v3CachedCalls OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.4.3 |
v3ccNullsThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.1 |
v3ccGetattrsThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.2 |
v3ccSetattrsThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.3 |
v3ccLookupsThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.4 |
v3ccAccesssThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.5 |
v3ccReadlinksThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.6 |
v3ccReadsThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.7 |
v3ccWritesThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.8 |
v3ccCreatesThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.9 |
v3ccMkdirsThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.10 |
v3ccSymlinksThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.11 |
v3ccMknodsThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.12 |
v3ccRemovesThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.13 |
v3ccRmdirsThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.14 |
v3ccRenamesThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.15 |
v3ccLinksThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.16 |
v3ccReaddirsThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.17 |
v3ccReaddirPlussThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.18 |
v3ccFsstatsThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.19 |
v3ccFsinfosThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.20 |
v3ccPathconfsThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.21 |
v3ccCommitsThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.4.3.22 |
v3CachedPerCent OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.4.4 |
v3cpNullsThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.1 |
v3cpGetattrsThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.2 |
v3cpSetattrsThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.3 |
v3cpLookupsThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.4 |
v3cpAccesssThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.5 |
v3cpReadlinksThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.6 |
v3cpReadsThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.7 |
v3cpWritesThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.8 |
v3cpCreatesThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.9 |
v3cpMkdirsThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.10 |
v3cpSymlinksThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.11 |
v3cpMknodsThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.12 |
v3cpRemovesThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.13 |
v3cpRmdirsThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.14 |
v3cpRenamesThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.15 |
v3cpLinksThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.16 |
v3cpReaddirsThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.17 |
v3cpReaddirPlussThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.18 |
v3cpFsstatsThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.19 |
v3cpFsinfosThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.20 |
v3cpPathconfsThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.21 |
v3cpCommitsThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.2.4.4.22 |
replyCache OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.5 |
rcInProgressHitsThe number of NFS requests that were dropped, for calls already in progress, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.1 |
rcDelayHitsThe number of NFS requests that were dropped, for replies already generated within a short interval, since the last time the statistics were cleared. These stats are deprecated. A value of zero will always be returned for these stats.rodeprecated Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.2 |
rcMissesThe number of NFS requests received for which there were no corresponding entries already in the Reply Cache, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.3 |
rcNonIdemDoneHitsThe number of NFS requests received that resulted in replies being replayed from the Reply Cache, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.4 |
rcNonIdemNotDoneHitsThe number of NFS requests received for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.5 |
rcTcpInProgressHitsThe number of NFS requests that were dropped for the TCP protocol, for calls already in progress, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.6 |
rcTcpDelayHitsThe number of NFS requests that were dropped for the TCP protocol, for replies already generated within a short interval, since the last time the statistics were cleared. These stats are deprecated. A value of zero will always be returned for these stats.rodeprecated Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.7 |
rcTcpMissesThe number of NFS requests received for the TCP protocol for which there were no corresponding entries already in the Reply Cache, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.8 |
rcTcpNonIdemDoneHitsThe number of NFS requests received for the TCP protocol that resulted in replies being replayed from the Reply Cache, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.9 |
rcTcpNonIdemNotDoneHitsThe number of NFS requests received for the TCP protocol for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.10 |
rcUdpInProgressHitsThe number of NFS requests that were dropped for the UDP protocol, for calls already in progress, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.11 |
rcUdpDelayHitsThe number of NFS requests that were dropped for the UDP protocol, for replies already generated within a short interval, since the last time the statistics were cleared. These stats are deprecated. A value of zero will always be returned for these stats.rodeprecated Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.12 |
rcUdpMissesThe number of NFS requests received for the UDP protocol for which there were no corresponding entries already in the Reply Cache, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.13 |
rcUdpNonIdemDoneHitsThe number of NFS requests received for the UDP protocol that resulted in replies being replayed from the Reply Cache, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.14 |
rcUdpNonIdemNotDoneHitsThe number of NFS requests received for the UDP protocol for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.5.15 |
nfsrwStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.6 |
v2ReadStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.6.1 |
v2Read512CallsThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 0-511 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.1.1 |
v2Read1KCallsThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 512-1023 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.1.2 |
v2Read2KCallsThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 1K-2047 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.1.3 |
v2Read4KCallsThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 2K-4095 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.1.4 |
v2Read8KCallsThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 4K-8191 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.1.5 |
v2Read16KCallsThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 8K-16383 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.1.6 |
v2Read32KCallsThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 16K-32767 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.1.7 |
v2Read64KCallsThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 32K-65535 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.1.8 |
v2Read128KCallsThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 64K-131071 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.1.9 |
v2WriteStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.6.2 |
v2Write512CallsThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 0-511 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.2.1 |
v2Write1KCallsThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 512-1023 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.2.2 |
v2Write2KCallsThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 1K-2047 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.2.3 |
v2Write4KCallsThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 2K-4095 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.2.4 |
v2Write8KCallsThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 4K-8191 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.2.5 |
v2Write16KCallsThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 8K-16383 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.2.6 |
v2Write32KCallsThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 16K-32767 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.2.7 |
v2Write64KCallsThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 32K-65535 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.2.8 |
v2Write128KCallsThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 64K-131071 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.2.9 |
v3ReadStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.6.3 |
v3Read512CallsThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 0-511 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.3.1 |
v3Read1KCallsThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 512-1023 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.3.2 |
v3Read2KCallsThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 1K-2047 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.3.3 |
v3Read4KCallsThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 2K-4095 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.3.4 |
v3Read8KCallsThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 4K-8191 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.3.5 |
v3Read16KCallsThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 8K-16383 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.3.6 |
v3Read32KCallsThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 16K-32767 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.3.7 |
v3Read64KCallsThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 32K-65535 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.3.8 |
v3Read128KCallsThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 64K-131071 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.3.9 |
v3WriteStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.2.6.4 |
v3Write512CallsThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 0-511 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.4.1 |
v3Write1KCallsThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 512-1023 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.4.2 |
v3Write2KCallsThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 1K-2047 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.4.3 |
v3Write4KCallsThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 2K-4095 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.4.4 |
v3Write8KCallsThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 4K-8191 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.4.5 |
v3Write16KCallsThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 8K-16383 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.4.6 |
v3Write32KCallsThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 16K-32767 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.4.7 |
v3Write64KCallsThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 32K-65535 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.4.8 |
v3Write128KCallsThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 64K-131071 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.1.2.6.4.9 |
nfsPerClient OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.1.3 |
pclTableProvide a report of per-client NFS statistics since the last time the statistics were cleared. SEQUENCE OF PclEntry .1.3.6.1.4.1.789.1.3.1.3.1 |
pclEntryProvide a report of NFS statistics for the referenced NFS client since the last time the statistics were cleared. PclEntry .1.3.6.1.4.1.789.1.3.1.3.1.1 |
pclIpAddrThe IP address of the referenced client.ro IpAddress .1.3.6.1.4.1.789.1.3.1.3.1.1.1 |
pclRpcCallsThe total number of RPC calls received from the referenced client, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.2 |
pclRpcBadCallsThe total number of calls received from the referenced client that were rejected by the RPC layer, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.3 |
pclRpcNullRecvsThe number of times an RPC call was not available when it was thought to be received from referenced client, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.4 |
pclRpcBadLensThe number of RPC calls received from the referenced client with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.5 |
pclRpcServXDRCallsThe number of RPC calls received from the referenced client whose header could not be XDR decoded, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.6 |
pclNfsCallsThe total number of NFS calls received from the referenced client, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.7 |
pclNfsServBadCallsThe total number of NFS calls received from the referenced client that were rejected, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.8 |
pclNfsV2NullsThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_NULL (Do Nothing) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.9 |
pclNfsV2GetattrsThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.10 |
pclNfsV2SetattrsThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.11 |
pclNfsV2RootsThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_ROOT (Get Filesystem Root) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.12 |
pclNfsV2LookupsThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_LOOKUP (Look Up File Name) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.13 |
pclNfsV2ReadlinksThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_READLINK (Read From Symbolic Link) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.14 |
pclNfsV2ReadsThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_READ (Read From File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.15 |
pclNfsV2WrcachesThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITECACHE (Write to Cache) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.16 |
pclNfsV2WritesThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITE (Write to File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.17 |
pclNfsV2CreatesThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_CREATE (Create File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.18 |
pclNfsV2RemovesThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_REMOVE (Remove File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.19 |
pclNfsV2RenamesThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_RENAME (Rename File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.20 |
pclNfsV2LinksThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_LINK (Create Link to File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.21 |
pclNfsV2SymlinksThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.22 |
pclNfsV2MkdirsThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_MKDIR (Create Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.23 |
pclNfsV2RmdirsThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_RMDIR (Remove Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.24 |
pclNfsV2ReaddirsThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.25 |
pclNfsV2StatfssThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.26 |
pclNfsV3NullsThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_NULL (Do Nothing) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.27 |
pclNfsV3GetattrsThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.28 |
pclNfsV3SetattrsThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.29 |
pclNfsV3LookupsThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LOOKUP (Lookup Filename) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.30 |
pclNfsV3AccesssThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_ACCESS (Check Access Permission) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.31 |
pclNfsV3ReadlinksThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.32 |
pclNfsV3ReadsThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READ (Read From File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.33 |
pclNfsV3WritesThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_WRITE (Write to File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.34 |
pclNfsV3CreatesThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_CREATE (Create a File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.35 |
pclNfsV3MkdirsThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKDIR (Create a Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.36 |
pclNfsV3SymlinksThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.37 |
pclNfsV3MknodsThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKNOD (Create a Special Device) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.38 |
pclNfsV3RemovesThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_REMOVE (Remove a File) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.39 |
pclNfsV3RmdirsThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RMDIR (Remove a Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.40 |
pclNfsV3RenamesThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RENAME (Rename a File or Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.41 |
pclNfsV3LinksThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LINK (Create Link to an Object) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.42 |
pclNfsV3ReaddirsThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.43 |
pclNfsV3ReaddirPlussThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.44 |
pclNfsV3FsstatsThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.45 |
pclNfsV3FsinfosThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSINFO (Get Static File System Information) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.46 |
pclNfsV3PathconfsThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.47 |
pclNfsV3CommitsThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.48 |
pclPerCentThe number of the total NFS calls for the referenced client as a percentage of the total NFS calls received from all clients, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.49 |
pclNfsV2NullPerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_NULL (Do Nothing) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.50 |
pclNfsV2GetattrPerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_GETATTR (Get File Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.51 |
pclNfsV2SetattrPerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_SETATTR (Set File Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.52 |
pclNfsV2RootPerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_ROOT (Get Filesystem Root) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.53 |
pclNfsV2LookupPerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_LOOKUP (Look Up File Name) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.54 |
pclNfsV2ReadlinkPerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_READLINK (Read From Symbolic Link) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.55 |
pclNfsV2ReadPerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_READ (Read From File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.56 |
pclNfsV2WrcachePerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITECACHE (Write to Cache) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.57 |
pclNfsV2WritePerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITE (Write to File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.58 |
pclNfsV2CreatePerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_CREATE (Create File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.59 |
pclNfsV2RemovePerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_REMOVE (Remove File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.60 |
pclNfsV2RenamePerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_RENAME (Rename File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.61 |
pclNfsV2LinkPerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_LINK (Create Link to File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.62 |
pclNfsV2SymlinkPerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.63 |
pclNfsV2MkdirPerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_MKDIR (Create Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.64 |
pclNfsV2RmdirPerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_RMDIR (Remove Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.65 |
pclNfsV2ReaddirPerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_READDIR (Read From Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.66 |
pclNfsV2StatfsPerCentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.67 |
pclNfsV3NullPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_NULL (Do Nothing) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.68 |
pclNfsV3GetattrPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_GETATTR (Get File Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.69 |
pclNfsV3SetattrPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SETATTR (Set File Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.70 |
pclNfsV3LookupPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LOOKUP (Lookup Filename) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.71 |
pclNfsV3AccessPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_ACCESS (Check Access Permission) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.72 |
pclNfsV3ReadlinkPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.73 |
pclNfsV3ReadPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READ (Read From File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.74 |
pclNfsV3WritePerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_WRITE (Write to File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.75 |
pclNfsV3CreatePerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_CREATE (Create a File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.76 |
pclNfsV3MkdirPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKDIR (Create a Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.77 |
pclNfsV3SymlinkPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.78 |
pclNfsV3MknodPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKNOD (Create a Special Device) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.79 |
pclNfsV3RemovePerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_REMOVE (Remove a File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.80 |
pclNfsV3RmdirPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RMDIR (Remove a Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.81 |
pclNfsV3RenamePerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RENAME (Rename a File or Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.82 |
pclNfsV3LinkPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LINK (Create Link to an Object) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.83 |
pclNfsV3ReaddirPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIR (Read From Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.84 |
pclNfsV3ReaddirPlusPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.85 |
pclNfsV3FsstatPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.86 |
pclNfsV3FsinfoPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSINFO (Get Static File System Information) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.87 |
pclNfsV3PathconfPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.88 |
pclNfsV3CommitPerCentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.1.1.89 |
pclNfsV2Read512CallsThe number of NFS Version 2 read calls with request sizes between 0-511 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.90 |
pclNfsV2Read1KCallsThe number of NFS Version 2 read calls with request sizes between 512-1023 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.91 |
pclNfsV2Read2KCallsThe number of NFS Version 2 read calls with request sizes between 1K-2047 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.92 |
pclNfsV2Read4KCallsThe number of NFS Version 2 read calls with request sizes between 2K-4095 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.93 |
pclNfsV2Read8KCallsThe number of NFS Version 2 read calls with request sizes between 4K-8191 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.94 |
pclNfsV2Read16KCallsThe number of NFS Version 2 read calls with request sizes between 8K-16383 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.95 |
pclNfsV2Read32KCallsThe number of NFS Version 2 read calls with request sizes between 16K-32767 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.96 |
pclNfsV2Read64KCallsThe number of NFS Version 2 read calls with request sizes between 32K-65535 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.97 |
pclNfsV2Read128KCallsThe number of NFS Version 2 read calls with request sizes between 64K-131071 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.98 |
pclNfsV2Write512CallsThe number of NFS Version 2 write calls with request sizes between 0-511 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.99 |
pclNfsV2Write1KCallsThe number of NFS Version 2 write calls with request sizes between 512-1023 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.100 |
pclNfsV2Write2KCallsThe number of NFS Version 2 write calls with request sizes between 1K-2047 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.101 |
pclNfsV2Write4KCallsThe number of NFS Version 2 write calls with request sizes between 2K-4095 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.102 |
pclNfsV2Write8KCallsThe number of NFS Version 2 write calls with request sizes between 4K-8191 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.103 |
pclNfsV2Write16KCallsThe number of NFS Version 2 write calls with request sizes between 8K-16383 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.104 |
pclNfsV2Write32KCallsThe number of NFS Version 2 write calls with request sizes between 16K-32767 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.105 |
pclNfsV2Write64KCallsThe number of NFS Version 2 write calls with request sizes between 32K-65535 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.106 |
pclNfsV2Write128KCallsThe number of NFS Version 2 write calls with request sizes between 64K-131071 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.107 |
pclNfsV3Read512CallsThe number of NFS Version 3 read calls with request sizes between 0-511 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.108 |
pclNfsV3Read1KCallsThe number of NFS Version 3 read calls with request sizes between 512-1023 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.109 |
pclNfsV3Read2KCallsThe number of NFS Version 3 read calls with request sizes between 1K-2047 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.110 |
pclNfsV3Read4KCallsThe number of NFS Version 3 read calls with request sizes between 2K-4095 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.111 |
pclNfsV3Read8KCallsThe number of NFS Version 3 read calls with request sizes between 4K-8191 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.112 |
pclNfsV3Read16KCallsThe number of NFS Version 3 read calls with request sizes between 8K-16383 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.113 |
pclNfsV3Read32KCallsThe number of NFS Version 3 read calls with request sizes between 16K-32767 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.114 |
pclNfsV3Read64KCallsThe number of NFS Version 3 read calls with request sizes between 32K-65535 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.115 |
pclNfsV3Read128KCallsThe number of NFS Version 3 read calls with request sizes between 64K-131071 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.116 |
pclNfsV3Write512CallsThe number of NFS Version 3 write calls with request sizes between 0-511 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.117 |
pclNfsV3Write1KCallsThe number of NFS Version 3 write calls with request sizes between 512-1023 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.118 |
pclNfsV3Write2KCallsThe number of NFS Version 3 write calls with request sizes between 1K-2047 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.119 |
pclNfsV3Write4KCallsThe number of NFS Version 3 write calls with request sizes between 2K-4095 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.120 |
pclNfsV3Write8KCallsThe number of NFS Version 3 write calls with request sizes between 4K-8191 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.121 |
pclNfsV3Write16KCallsThe number of NFS Version 3 write calls with request sizes between 8K-16383 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.122 |
pclNfsV3Write32KCallsThe number of NFS Version 3 write calls with request sizes between 16K-32767 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.123 |
pclNfsV3Write64KCallsThe number of NFS Version 3 write calls with request sizes between 32K-65535 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.124 |
pclNfsV3Write128KCallsThe number of NFS Version 3 write calls with request sizes between 64K-131071 bytes received from this client.ro Counter32 .1.3.6.1.4.1.789.1.3.1.3.1.1.125 |
pclNumberNumber of entries in the pclTable table.ro Integer32 .1.3.6.1.4.1.789.1.3.1.3.2 |
totNfs OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2 |
trpcServ OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.1 |
trpcCallsThe total number of RPC calls received, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.1.1 |
trpcBadCallsThe total number of calls rejected by the RPC layer, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.1.2 |
trpcNullRecvsThe number of times an RPC call was not available when it was thought to be received, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.1.3 |
trpcBadLensThe number of RPC calls received with a length shorter than a minimum-sized RPC call, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.1.4 |
trpcServXDRCallsThe number of RPC calls received whose header could not be XDR decoded, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.1.5 |
tnfsServ OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2 |
tnfsCallsThe total number of NFS calls received, since last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.1 |
tnfsServBadCallsThe total number of received NFS calls rejected, since last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.2 |
tnfsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.3 |
tv2Calls OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.3.1 |
tv2cNullsThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.1 |
tv2cGetattrsThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.2 |
tv2cSetattrsThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, since the the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.3 |
tv2cRootsThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.4 |
tv2cLookupsThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.5 |
tv2cReadlinksThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.6 |
tv2cReadsThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.7 |
tv2cWrcachesThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.8 |
tv2cWritesThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.9 |
tv2cCreatesThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.10 |
tv2cRemovesThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.11 |
tv2cRenamesThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.12 |
tv2cLinksThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.13 |
tv2cSymlinksThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.14 |
tv2cMkdirsThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.15 |
tv2cRmdirsThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.16 |
tv2cReaddirsThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.17 |
tv2cStatfssThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.1.18 |
tv2Percent OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.3.2 |
tv2pNullsThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.1 |
tv2pGetattrsThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.2 |
tv2pSetattrsThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.3 |
tv2pRootsThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.4 |
tv2pLookupsThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.5 |
tv2pReadlinksThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.6 |
tv2pReadsThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.7 |
tv2pWrcachesThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.8 |
tv2pWritesThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.9 |
tv2pCreatesThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.10 |
tv2pRemovesThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.11 |
tv2pRenamesThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.12 |
tv2pLinksThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.13 |
tv2pSymlinksThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.14 |
tv2pMkdirsThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.15 |
tv2pRmdirsThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.16 |
tv2pReaddirsThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.17 |
tv2pStatfssThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure as a percentage of total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.2.18 |
tv2CachedCalls OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.3.3 |
tv2ccNullsThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.1 |
tv2ccGetattrsThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.2 |
tv2ccSetattrsThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.3 |
tv2ccRootsThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.4 |
tv2ccLookupsThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.5 |
tv2ccReadlinksThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.6 |
tv2ccReadsThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.7 |
tv2ccWrcachesThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.8 |
tv2ccWritesThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.9 |
tv2ccCreatesThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.10 |
tv2ccRemovesThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.11 |
tv2ccRenamesThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.12 |
tv2ccLinksThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.13 |
tv2ccSymlinksThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.14 |
tv2ccMkdirsThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.15 |
tv2ccRmdirsThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.16 |
tv2ccReaddirsThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.17 |
tv2ccStatfssThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.3.3.18 |
tv2CachedPerCent OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.3.4 |
tv2cpNullsThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.1 |
tv2cpGetattrsThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.2 |
tv2cpSetattrsThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.3 |
tv2cpRootsThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.4 |
tv2cpLookupsThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.5 |
tv2cpReadlinksThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.6 |
tv2cpReadsThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.7 |
tv2cpWrcachesThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.8 |
tv2cpWritesThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.9 |
tv2cpCreatesThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.10 |
tv2cpRemovesThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.11 |
tv2cpRenamesThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.12 |
tv2cpLinksThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.13 |
tv2cpSymlinksThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.14 |
tv2cpMkdirsThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.15 |
tv2cpRmdirsThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.16 |
tv2cpReaddirsThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.17 |
tv2cpStatfssThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.3.4.18 |
tnfsV3 OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.4 |
tv3Calls OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.4.1 |
tv3cNullsThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.1 |
tv3cGetattrsThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.2 |
tv3cSetattrsThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.3 |
tv3cLookupsThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.4 |
tv3cAccesssThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.5 |
tv3cReadlinksThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.6 |
tv3cReadsThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.7 |
tv3cWritesThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.8 |
tv3cCreatesThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.9 |
tv3cMkdirsThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.10 |
tv3cSymlinksThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.11 |
tv3cMknodsThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.12 |
tv3cRemovesThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.13 |
tv3cRmdirsThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.14 |
tv3cRenamesThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.15 |
tv3cLinksThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.16 |
tv3cReaddirsThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.17 |
tv3cReaddirPlussThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.18 |
tv3cFsstatsThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.19 |
tv3cFsinfosThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.20 |
tv3cPathconfsThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.21 |
tv3cCommitsThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.1.22 |
tv3Percent OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.4.2 |
tv3pNullsThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.1 |
tv3pGetattrsThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.2 |
tv3pSetattrsThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.3 |
tv3pLookupsThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.4 |
tv3pAccesssThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.5 |
tv3pReadlinksThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.6 |
tv3pReadsThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.7 |
tv3pWritesThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.8 |
tv3pCreatesThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.9 |
tv3pMkdirsThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.10 |
tv3pSymlinksThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.11 |
tv3pMknodsThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.12 |
tv3pRemovesThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.13 |
tv3pRmdirsThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.14 |
tv3pRenamesThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.15 |
tv3pLinksThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.16 |
tv3pReaddirsThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.17 |
tv3pReaddirPlussThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.18 |
tv3pFsstatsThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.19 |
tv3pFsinfosThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.20 |
tv3pPathconfsThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.21 |
tv3pCommitsThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, as a percentage of the total NFS calls received, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.2.22 |
tv3CachedCalls OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.4.3 |
tv3ccNullsThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.1 |
tv3ccGetattrsThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.2 |
tv3ccSetattrsThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.3 |
tv3ccLookupsThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.4 |
tv3ccAccesssThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.5 |
tv3ccReadlinksThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.6 |
tv3ccReadsThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.7 |
tv3ccWritesThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.8 |
tv3ccCreatesThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.9 |
tv3ccMkdirsThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.10 |
tv3ccSymlinksThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.11 |
tv3ccMknodsThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.12 |
tv3ccRemovesThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.13 |
tv3ccRmdirsThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.14 |
tv3ccRenamesThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.15 |
tv3ccLinksThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.16 |
tv3ccReaddirsThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.17 |
tv3ccReaddirPlussThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.18 |
tv3ccFsstatsThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.19 |
tv3ccFsinfosThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.20 |
tv3ccPathconfsThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.21 |
tv3ccCommitsThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.4.3.22 |
tv3CachedPerCent OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.4.4 |
tv3cpNullsThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.1 |
tv3cpGetattrsThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.2 |
tv3cpSetattrsThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.3 |
tv3cpLookupsThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.4 |
tv3cpAccesssThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.5 |
tv3cpReadlinksThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.6 |
tv3cpReadsThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.7 |
tv3cpWritesThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.8 |
tv3cpCreatesThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.9 |
tv3cpMkdirsThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.10 |
tv3cpSymlinksThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.11 |
tv3cpMknodsThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.12 |
tv3cpRemovesThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.13 |
tv3cpRmdirsThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.14 |
tv3cpRenamesThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.15 |
tv3cpLinksThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.16 |
tv3cpReaddirsThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.17 |
tv3cpReaddirPlussThe number of NFS Version 3 calls received for the NFSPROC3_READIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.18 |
tv3cpFsstatsThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.19 |
tv3cpFsinfosThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.20 |
tv3cpPathconfsThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.21 |
tv3cpCommitsThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.ro Integer32 .1.3.6.1.4.1.789.1.3.2.2.4.4.22 |
treplyCache OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.5 |
trcInProgressHitsThe number of NFS requests that were dropped, for calls already in progress, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.1 |
trcDelayHitsThe number of NFS requests that were dropped, for replies already generated within a short interval, since the last boot. These stats are deprecated. A value of zero will always be returned for these stats.rodeprecated Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.2 |
trcMissesThe number of NFS requests received for which there were no corresponding entries already in the Reply Cache, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.3 |
trcNonIdemDoneHitsThe number of NFS requests received that resulted in replies being replayed from the Reply Cache, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.4 |
trcNonIdemNotDoneHitsThe number of NFS requests received for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.5 |
trcTcpInProgressHitsThe number of NFS requests that were dropped for the TCP protocol, for calls already in progress, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.6 |
trcTcpDelayHitsThe number of NFS requests that were dropped for the TCP protocol, for replies already generated within a short interval, since the last boot. These stats are deprecated. A value of zero will always be returned for these stats.rodeprecated Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.7 |
trcTcpMissesThe number of NFS requests received for the TCP protocol for which there were no corresponding entries already in the Reply Cache, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.8 |
trcTcpNonIdemDoneHitsThe number of NFS requests received for the TCP protocol that resulted in replies being replayed from the Reply Cache, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.9 |
trcTcpNonIdemNotDoneHitsThe number of NFS requests received for the TCP protocol for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.10 |
trcUdpInProgressHitsThe number of NFS requests that were dropped for the UDP protocol, for calls already in progress, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.11 |
trcUdpDelayHitsThe number of NFS requests that were dropped for the UDP protocol, for replies already generated within a short interval, since the last boot. These stats are deprecated. A value of zero will always be returned for these stats.rodeprecated Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.12 |
trcUdpMissesThe number of NFS requests received for the UDP protocol for which there were no corresponding entries already in the Reply Cache, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.13 |
trcUdpNonIdemDoneHitsThe number of NFS requests received for the UDP protocol that resulted in replies being replayed from the Reply Cache, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.14 |
trcUdpNonIdemNotDoneHitsThe number of NFS requests received for the UDP protocol for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last boot.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.5.15 |
tnfsrwStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.6 |
tv2ReadStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.6.1 |
tv2Read512CallsThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 0-511 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.1.1 |
tv2Read1KCallsThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 512-1023 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.1.2 |
tv2Read2KCallsThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 1K-2047 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.1.3 |
tv2Read4KCallsThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 2K-4095 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.1.4 |
tv2Read8KCallsThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 4K-8191 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.1.5 |
tv2Read16KCallsThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 8K-16383 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.1.6 |
tv2Read32KCallsThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 16K-32767 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.1.7 |
tv2Read64KCallsThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 32K-65535 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.1.8 |
tv2Read128KCallsThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 64K-131071 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.1.9 |
tv2WriteStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.6.2 |
tv2Write512CallsThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 0-511 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.2.1 |
tv2Write1KCallsThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 512-1023 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.2.2 |
tv2Write2KCallsThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 1K-2047 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.2.3 |
tv2Write4KCallsThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 2K-4095 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.2.4 |
tv2Write8KCallsThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 4K-8191 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.2.5 |
tv2Write16KCallsThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 8K-16383 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.2.6 |
tv2Write32KCallsThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 16K-32767 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.2.7 |
tv2Write64KCallsThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 32K-65535 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.2.8 |
tv2Write128KCallsThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 64K-131071 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.2.9 |
tv3ReadStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.6.3 |
tv3Read512CallsThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 0-511 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.3.1 |
tv3Read1KCallsThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 512-1023 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.3.2 |
tv3Read2KCallsThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 1K-2047 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.3.3 |
tv3Read4KCallsThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 2K-4095 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.3.4 |
tv3Read8KCallsThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 4K-8191 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.3.5 |
tv3Read16KCallsThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 8K-16383 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.3.6 |
tv3Read32KCallsThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 16K-32767 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.3.7 |
tv3Read64KCallsThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 32K-65535 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.3.8 |
tv3Read128KCallsThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 64K-131071 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.3.9 |
tv3WriteStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.2.2.6.4 |
tv3Write512CallsThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 0-511 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.4.1 |
tv3Write1KCallsThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 512-1023 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.4.2 |
tv3Write2KCallsThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 1K-2047 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.4.3 |
tv3Write4KCallsThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 2K-4095 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.4.4 |
tv3Write8KCallsThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 4K-8191 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.4.5 |
tv3Write16KCallsThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 8K-16383 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.4.6 |
tv3Write32KCallsThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 16K-32767 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.4.7 |
tv3Write64KCallsThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 32K-65535 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.4.8 |
tv3Write128KCallsThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 64K-131071 bytes.ro Counter32 .1.3.6.1.4.1.789.1.3.2.2.6.4.9 |
nfsOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.3.3 |
nfsIsLicensedWhether the nfs protocol is licensed on the filer.ro Enumeration .1.3.6.1.4.1.789.1.3.3.1 |
quota OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.4 |
quotaStateIndicates whether the root volume's quotas are ON, OFF or initializing. This object is deprecated - use qvStateTable.qvStateStat instead.rodeprecated Enumeration .1.3.6.1.4.1.789.1.4.1 |
quotaInitPercentIndicates percentage of root volume quota computation done while quotas are in initializing state. This object is deprecated - use qvStateTable.qvInitPercent instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.2 |
qrTableProvide a report of the current file and space consumption for each user or group with a quota in /etc/quotas. All quotas are displayed regardless of volume, and no volume information is given. This table is deprecated - use qrVTable instead.deprecated SEQUENCE OF QrEntry .1.3.6.1.4.1.789.1.4.3 |
qrEntryProvide a report of the current file and space consumption for a referenced entry with a quota in the file /etc/quotas. All quotas are displayed regardless of volume, and no volume information is given. This object is deprecated - use qrVEntry instead.deprecated QrEntry .1.3.6.1.4.1.789.1.4.3.1 |
qrIndexA number that identifies this entry in the file /etc/quotas.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.3.1.1 |
qrTypeIdentifies the kind of quota for this qrEntry.rodeprecated Enumeration .1.3.6.1.4.1.789.1.4.3.1.2 |
qrIdThe UID (user's numerical ID) or the GID (numerical ID of the group that a user belongs to), as applicable, associated with this qrEntry.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.3.1.3 |
qrKBytesUsedThe current number of KBytes used for this qrEntry.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.3.1.4 |
qrKBytesLimitThe limit of KBytes that can be used for this qrEntry.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.3.1.5 |
qrFilesUsedThe current number of files used for this qrEntry.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.3.1.6 |
qrFileLimitThe limit of files that can be used for this qrEntry.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.3.1.7 |
qrPathNameA textual string that contains the path corresponding to this qrEntry.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.4.3.1.8 |
qvStateTableProvide a report of the current quota state of each volume in the system. SEQUENCE OF QvStateEntry .1.3.6.1.4.1.789.1.4.4 |
qvStateEntryProvide a report of the current quota state of each volume in the system. QvStateEntry .1.3.6.1.4.1.789.1.4.4.1 |
qvStateVolumeA number that identifies this volume. The mapping of this number to actual volumes may change if volumes are added or deleted. Use qvStateName to unambiguously identify a volume. The mapping established by this object is the same as the mapping of qrVVolume (below) to actual volumes. For instance, if a qvStateVolume value of '5' represents the volume 'vol2', a value of '5' in qrVVolume also represents the volume 'vol2'.ro Integer32 .1.3.6.1.4.1.789.1.4.4.1.1 |
qvStateNameIndicates the name of this volume.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.4.4.1.2 |
qvStateStatIndicates whether quotas are ON, OFF, initializing or corruptedro Enumeration .1.3.6.1.4.1.789.1.4.4.1.3 |
qvStateInitPercentIndicates percentage of quota computation done while quotas are in initializing state.ro Integer32 .1.3.6.1.4.1.789.1.4.4.1.4 |
qvStateVserverIndicates the vserver to which the volume belongs. Name from the cluster interfaces. Only applicable to cluster-mode volume.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.4.4.1.5 |
qrVTableProvide a report of the current file and space consumption for each user or group with a quota in /etc/quotas.deprecated SEQUENCE OF QrVEntry .1.3.6.1.4.1.789.1.4.5 |
qrVEntryProvide a report of the current file and space consumption for a referenced entry with a quota in the file /etc/quotas. Indices select the volume of the quota and the quota entry itself.deprecated QrVEntry .1.3.6.1.4.1.789.1.4.5.1 |
qrVIndexA number that identifies this entry in the file /etc/quotas in the given volume.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.5.1.1 |
qrVTypeIdentifies the kind of quota for this qrVEntry.rodeprecated Enumeration .1.3.6.1.4.1.789.1.4.5.1.2 |
qrVIdThe UID (user's numerical ID) or the GID (numerical ID of the group that a user belongs to), as applicable, associated with this qrVEntry. Check the qrVIdType field to see if this field is valid.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.5.1.3 |
qrVKBytesUsedThe current number of KBytes used for this qrVEntry.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.5.1.4 |
qrVKBytesLimitThe limit of KBytes that can be used for this qrVEntry.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.5.1.5 |
qrVFilesUsedThe current number of files used for this qrVEntry.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.5.1.6 |
qrVFileLimitThe limit of files that can be used for this qrVEntry.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.5.1.7 |
qrVPathNameA textual string that contains the path corresponding to this qrVEntry.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.4.5.1.8 |
qrVVolumeA number that identifies the volume for which this quota is in effect on. The volume that this value represents can be determined by checking the value of qvStateName (above) with qvStateVolume set to the value found here.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.5.1.9 |
qrVTreeA string that indicates which qtree this quota belongs to.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.4.5.1.10 |
qrVIdTypeA value that indicates which ID field is valid.rodeprecated Enumeration .1.3.6.1.4.1.789.1.4.5.1.11 |
qrVSidThe one or more IDs associated with this qrVEntry. If the qrVentry is associated with a Windows ID, the text form of the Windows ID (the SID) is here. If the qrVEntry is associated with more than one id, this contains a blank separated list of those IDs. Check the qrVIdType field to see if this field is valid.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.4.5.1.12 |
qrVKBytesThresholdA number of KBytes that when used by this entry produces a warning message.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.5.1.13 |
qrVKBytesLimitSoftThe limit of KBytes that can be used for this qrVEntry before a warning message and SNMP trap is produced.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.5.1.14 |
qrVFileLimitSoftThe limit of files that can be used for this qrVEntry before a warning message and SNMP trap is produced.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.5.1.15 |
qrV2TableProvide a report of the current file and space consumption for each user or group with a quota in /etc/quotas. SEQUENCE OF QrV2Entry .1.3.6.1.4.1.789.1.4.6 |
qrV2EntryProvide a report of the current file and space consumption for a referenced entry with a quota in the file /etc/quotas. Indices select the volume of the quota and the quota entry itself. QrV2Entry .1.3.6.1.4.1.789.1.4.6.1 |
qrV2IndexA number that identifies this entry in the file /etc/quotas in the given volume.ro Integer32 .1.3.6.1.4.1.789.1.4.6.1.1 |
qrV2TypeIdentifies the kind of quota for this qrV2Entry.ro Enumeration .1.3.6.1.4.1.789.1.4.6.1.2 |
qrV2IdThe UID (user's numerical ID) or the GID (numerical ID of the group that a user belongs to), as applicable, associated with this qrV2Entry. Check the qrV2IdType field to see if this field is valid.ro Integer32 .1.3.6.1.4.1.789.1.4.6.1.3 |
qrV2HighKBytesUsedThe current number of KBytes used for this qrV2Entry. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use qrV264KBytesUsed instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.6.1.4 |
qrV2LowKBytesUsedThe current number of KBytes used for this qrV2Entry. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use qrV264KBytesUsed instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.6.1.5 |
qrV2QuotaUnlimitedThis flag designates whether or not the size based quota limit for this qrV2Entry is unlimited. If false(1) then qrV2*KBytesLimit OID's are valid, if true(2) then qrV2*KBytesLimit OID's are unused and will return 0.ro Enumeration .1.3.6.1.4.1.789.1.4.6.1.6 |
qrV2HighKBytesLimitThe limit of KBytes that can be used for this qrV2Entry. This object returns the most significant 32 bits of the 64 bit unsigned integer. This will return 0 if qrV2QuotaUnlimited is true. This object is deprecated - Use qrV264KBytesLimit instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.6.1.7 |
qrV2LowKBytesLimitThe limit of KBytes that can be used for this qrV2Entry. This object returns the least significant 32 bits of the 64 bit unsigned integer. This will return 0 if qrV2QuotaUnlimited is true. This object is deprecated - Use qrV264KBytesLimit instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.6.1.8 |
qrV2FilesUsedThe current number of files used for this qrV2Entry.ro Integer32 .1.3.6.1.4.1.789.1.4.6.1.9 |
qrV2FileQuotaUnlimitedThis flag designates whether or not the file based quota limit for this qrV2Entry is unlimited. If false(1) then qrV2FileLimit is valid, if true(2) qrV2FileLimit will return 0.ro Enumeration .1.3.6.1.4.1.789.1.4.6.1.10 |
qrV2FileLimitThe limit of files that can be used for this qrV2Entry.ro Integer32 .1.3.6.1.4.1.789.1.4.6.1.11 |
qrV2PathNameA textual string that contains the path corresponding to this qrV2Entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.4.6.1.12 |
qrV2VolumeA number that identifies the volume for which this quota is in effect on. The volume that this value represents can be determined by checking the value of qvStateName (above) with qvStateVolume set to the value found here.ro Integer32 .1.3.6.1.4.1.789.1.4.6.1.13 |
qrV2TreeA string that indicates which qtree this quota belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.4.6.1.14 |
qrV2IdTypeA value that indicates which ID field is valid.ro Enumeration .1.3.6.1.4.1.789.1.4.6.1.15 |
qrV2SidThe one or more IDs associated with this qrV2Entry. If the qrV2entry is associated with a Windows ID, the text form of the Windows ID (the SID) is here. If the qrV2Entry is associated with more than one id, this contains a blank separated list of those IDs. Check the qrV2IdType field to see if this field is valid.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.4.6.1.16 |
qrV2ThresholdUnlimitedThis flag designates whether or not the size based threshold limit for this qrV2Entry is unlimited. If false(1) then qrV2*KBytesThreshold OID's are valid, if true(2) then qrV2*KBytesThreshold OID's are unused and will return 0.ro Enumeration .1.3.6.1.4.1.789.1.4.6.1.17 |
qrV2HighKBytesThresholdA number of KBytes that when used by this entry produces a warning message. This object returns the most significant 32 bits of the 64 bit unsigned integer. This will return 0 if qrV2ThresholdUnlimited is true. This object is deprecated - Use qrV264KBytesThreshold instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.6.1.18 |
qrV2LowKBytesThresholdA number of KBytes that when used by this entry produces a warning message. This object returns the least significant 32 bits of the 64 bit unsigned integer. This will return 0 if qrV2ThresholdUnlimited is true. This object is deprecated - Use qrV264KBytesThreshold instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.6.1.19 |
qrV2SoftQuotaUnlimitedThis flag designates whether or not the size based soft quota limit for this qrV2Entry is unlimited. If false(1) then qrV2*KBytesSoftLimit OID's are valid, if true(2) the qrV2*KBytesSoftLimit OID's are unused and will return 0.ro Enumeration .1.3.6.1.4.1.789.1.4.6.1.20 |
qrV2HighKBytesSoftLimitThe limit of KBytes that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use qrV264KBytesSoftLimit instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.6.1.21 |
qrV2LowKBytesSoftLimitThe limit of KBytes that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use qrV264KBytesSoftLimit instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.4.6.1.22 |
qrV2SoftFileQuotaUnlimitedThis flag designates whether or not the file based soft quota limit for this qrV2Entry is unlimited. If false(1) then qrV2SoftFileLimit is valid, if true(2) qrV2SoftFileLimit is unused and will return 0.ro Enumeration .1.3.6.1.4.1.789.1.4.6.1.23 |
qrV2SoftFileLimitThe limit of files that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This will return 0 if qrV2SoftFileQuotaUnlimited is true.ro Integer32 .1.3.6.1.4.1.789.1.4.6.1.24 |
qrV264KBytesUsedThe current number of KBytes used for this qrV2Entry. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.4.6.1.25 |
qrV264KBytesLimitThe limit of KBytes that can be used for this qrV2Entry. This object returns all of the 64 bit unsigned integer. This will return 0 if qrV2QuotaUnlimited is true.ro Counter64 .1.3.6.1.4.1.789.1.4.6.1.26 |
qrV264KBytesThresholdA number of KBytes that when used by this entry produces a warning message. This object returns the all of the 64 bit unsigned integer. This will return 0 if qrV2ThresholdUnlimited is true.ro Counter64 .1.3.6.1.4.1.789.1.4.6.1.27 |
qrV264KBytesSoftLimitThe limit of KBytes that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.4.6.1.28 |
qrV2VolumeNameIndicates the name of the volume to which this quota belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.4.6.1.29 |
qrV2VserverIndicates the vserver to which the volume belongs. Name from the cluster interfaces. Only applicable to cluster-mode volume.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.4.6.1.30 |
filesys OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.5 |
filesysMaxfilesAvailThe count of the maximum number of files allowable on the root volume. This object is deprecated - use dfEntry.dfMaxFilesAvail instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.1 |
filesysMaxfilesUsedThe count of the number of files currently in use on the root volume. This object is deprecated - use dfEntry.dfMaxFilesUsed instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.2 |
filesysMaxfilesPossibleThe largest value to which the filesysMaxfilesAvail parameter above can be increased by reconfiguration on the root volume. This object is deprecated - use dfEntry.dfMaxFilesPossible.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.3 |
dfTableProvide a report of the available disk space on the file systems. The tables shows the available disk space for volumes as well as aggregates. For node volumes and aggregates, only online volumes and aggregates are reported. For cluster volumes and aggregates, the dfStateOnline is set and and the value for other fields are undefined when volumes and aggregates are not online. SEQUENCE OF DfEntry .1.3.6.1.4.1.789.1.5.4 |
dfEntryProvide a report of the available disk space on the referenced file system. For entries returned from the cluster interfaces only, if the dfRowInfo is not set to 'available', the values reported for other fields may not be valid. DfEntry .1.3.6.1.4.1.789.1.5.4.1 |
dfIndexA number that identifies this entry for the referenced file system.ro Integer32 .1.3.6.1.4.1.789.1.5.4.1.1 |
dfFileSysThe name for the referenced file system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.4.1.2 |
dfKBytesTotalThe total capacity in KBytes for the referenced file system.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.4.1.3 |
dfKBytesUsedThe total disk space in KBytes that is in use on the referenced file system.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.4.1.4 |
dfKBytesAvailThe total disk space in KBytes that is free for use on the referenced file system.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.4.1.5 |
dfPerCentKBytesCapacityThe percentage of disk space currently in use on the referenced file system.ro Integer32 .1.3.6.1.4.1.789.1.5.4.1.6 |
dfInodesUsedThe total number of inodes in use on the referenced file system.ro Integer32 .1.3.6.1.4.1.789.1.5.4.1.7 |
dfInodesFreeThe total number of inodes that are available for use on the referenced file system.ro Integer32 .1.3.6.1.4.1.789.1.5.4.1.8 |
dfPerCentInodeCapacityThe percentage of disk space currently in use based on inode counts, on the referenced file system.ro Integer32 .1.3.6.1.4.1.789.1.5.4.1.9 |
dfMountedOnThe name of the file on which this file system is mounted.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.4.1.10 |
dfMaxFilesAvailThe count of the maximum number of files allowable on the referenced file system.ro Integer32 .1.3.6.1.4.1.789.1.5.4.1.11 |
dfMaxFilesUsedThe count of the number of files currently in use on the referenced file system.ro Integer32 .1.3.6.1.4.1.789.1.5.4.1.12 |
dfMaxFilesPossibleThe largest value to which the filesysMaxfilesAvail parameter above can be increased by reconfiguration on the referenced file system.ro Integer32 .1.3.6.1.4.1.789.1.5.4.1.13 |
dfHighTotalKBytesThe total capacity in KBytes for the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use df64TotalKBytes instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.4.1.14 |
dfLowTotalKBytesThe total capacity in KBytes for the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use df64TotalKBytes instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.4.1.15 |
dfHighUsedKBytesThe total disk space in KBytes that is in use on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use df64UsedKBytes instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.4.1.16 |
dfLowUsedKBytesThe total disk space in KBytes that is in use on the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use df64UsedKBytes instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.4.1.17 |
dfHighAvailKBytesThe total disk space in KBytes that is free for use on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use df64AvailKBytes instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.4.1.18 |
dfLowAvailKBytesThe total disk space in KBytes that is free for use on the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use df64AvailKBytes instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.4.1.19 |
dfStatusThe status of the file system.ro Enumeration .1.3.6.1.4.1.789.1.5.4.1.20 |
dfMirrorStatusOverall mirror status of the file system.ro Enumeration .1.3.6.1.4.1.789.1.5.4.1.21 |
dfPlexCountNumber of plexes in this file system.ro Integer32 .1.3.6.1.4.1.789.1.5.4.1.22 |
dfTypeIndicates the type of container.ro Enumeration .1.3.6.1.4.1.789.1.5.4.1.23 |
dfHighSisSharedKBytesThe total amount of data in KBytes that is shared by more that one instance on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use df64SisSharedKBytes instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.4.1.24 |
dfLowSisSharedKBytesThe total amount of data in KBytes that is shared by more that one instance on the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use df64SisSharedKBytes instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.4.1.25 |
dfHighSisSavedKBytesThe total disk space in KBytes that is saved by storing only one copy of the duplicated blocks on the referenced file system. The object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use df64SisSavedKBytes instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.4.1.26 |
dfLowSisSavedKBytesThe total disk space in KBytes that is saved by storing only one copy of the duplicated blocks on the referenced file system. The object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use df64SisSavedKBytes instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.4.1.27 |
dfPerCentSavedThe percentage of disk space saved by eliminating the duplicated blocks on the referenced file system.ro Integer32 .1.3.6.1.4.1.789.1.5.4.1.28 |
df64TotalKBytesThe total capacity in KBytes for the referenced file system. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.5.4.1.29 |
df64UsedKBytesThe total disk space in KBytes that is in use on the referenced file system. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.5.4.1.30 |
df64AvailKBytesThe total disk space in KBytes that is free for use on the referenced file system. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.5.4.1.31 |
df64SisSharedKBytesThe total amount of data in KBytes that is shared by more that one instance on the referenced file system. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.5.4.1.32 |
df64SisSavedKBytesThe total disk space in KBytes that is saved by storing only one copy of the duplicated blocks on the referenced file system. The object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.5.4.1.33 |
dfVserverName of the vserver to which the volume belongs. For aggregate and aggregate snapshot it will be an empty string. This field is returned only from the cluster interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.4.1.34 |
dfStateOnlineThe state of the cluster aggregates and volumes. If this is not true, all the values for the fields of this table are undefined. This field is returned only from the cluster interfaces.ro Boolean .1.3.6.1.4.1.789.1.5.4.1.35 |
dfRowInfoVolume or aggregate and its snapshot is 'available' or 'partiallyAvailable'. This field is returned only from the cluster interfaces. Possible values for this field are: 'available' Indicates a normal case when everything went fine while fetching the values for the fields of this table and all values returned are valid. 'partiallyAvailable' Indicates something went wrong while fetching the values for the fields of this table and not all values are valid. For fields that could not be fetched, default values are set. For integers it is -1, for counters 0, and for string it is null.ro Enumeration .1.3.6.1.4.1.789.1.5.4.1.36 |
df64CompressSavedProvides the compression savings in a volume in KBytes. This is only returned for volumes.ro Counter64 .1.3.6.1.4.1.789.1.5.4.1.37 |
dfCompressSavedPercentProvides the percentage of compression savings in a volume, which is ((compr_saved/(compr_saved + used)) * 100). This is only returned for volumes.ro Integer32 .1.3.6.1.4.1.789.1.5.4.1.38 |
df64DedupeSavedProvides the deduplication savings in a volume in KBytes. This is only returned for volumes.ro Counter64 .1.3.6.1.4.1.789.1.5.4.1.39 |
dfDedupeSavedPercentProvides the percentage of deduplication savings in a volume, which is ((dedup_saved/(dedup_saved + used)) * 100). This is only returned for volumes.ro Integer32 .1.3.6.1.4.1.789.1.5.4.1.40 |
df64TotalSavedProvides the total savings due to deduplication & compression in a volume in KBytes. This is only returned for volumes.ro Counter64 .1.3.6.1.4.1.789.1.5.4.1.41 |
dfTotalSavedPercentProvides the percentage of total savings due to deduplication & compression in a volume, which is ((total_saved/(total_saved + used)) * 100). This is only returned for volumes.ro Integer32 .1.3.6.1.4.1.789.1.5.4.1.42 |
df64TotalReservedKBytesThe total disk space in KBytes that is reserved on the referenced file system.ro Counter64 .1.3.6.1.4.1.789.1.5.4.1.43 |
snapshot OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.5.5 |
slTableProvide a report of the snapshots on the root volume. This table is deprecated - use slVTable instead.deprecated SEQUENCE OF SlEntry .1.3.6.1.4.1.789.1.5.5.1 |
slEntryProvide a report on a given snapshot on the root volume. This object is deprecated - use slVEntry instead.deprecated SlEntry .1.3.6.1.4.1.789.1.5.5.1.1 |
slIndexA number that identifies this entry for the referenced file system.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.5.1.1.1 |
slMonthThe month in which the snapshot was created.rodeprecated Enumeration .1.3.6.1.4.1.789.1.5.5.1.1.2 |
slDayThe day on which the snapshot was created.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.5.1.1.3 |
slHourThe hour in which the snapshot was created.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.5.1.1.4 |
slMinutesThe minute in which the snapshot was created.rodeprecated Integer32 .1.3.6.1.4.1.789.1.5.5.1.1.5 |
slNameThe name of the referenced snapshot.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.5.1.1.6 |
slVTableProvide a report of the snapshots on the file systems. SEQUENCE OF SlVEntry .1.3.6.1.4.1.789.1.5.5.2 |
slVEntryProvide a report on a given snapshot on the file system. Indices select the volume of the snapshot and the snapshot entry itself. SlVEntry .1.3.6.1.4.1.789.1.5.5.2.1 |
slVIndexA number that identifies this entry for the referenced file system.ro Integer32 .1.3.6.1.4.1.789.1.5.5.2.1.1 |
slVMonthThe month in which the snapshot was created.ro Enumeration .1.3.6.1.4.1.789.1.5.5.2.1.2 |
slVDayThe day on which the snapshot was created.ro Integer32 .1.3.6.1.4.1.789.1.5.5.2.1.3 |
slVHourThe hour in which the snapshot was created.ro Integer32 .1.3.6.1.4.1.789.1.5.5.2.1.4 |
slVMinutesThe minute in which the snapshot was created.ro Integer32 .1.3.6.1.4.1.789.1.5.5.2.1.5 |
slVNameThe name of the referenced snapshot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.5.2.1.6 |
slVVolumeA number that identifies the volume / aggregate that contains this snapshot.ro Integer32 .1.3.6.1.4.1.789.1.5.5.2.1.7 |
slVNumberNumber of snapshots for this volume / aggregate.ro Integer32 .1.3.6.1.4.1.789.1.5.5.2.1.8 |
slVVolumeNameThe name of the volume / aggregate. This does not have a /vol/ prefix.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.5.2.1.9 |
slVTypeIndicates the type of container for this snapshot.ro Enumeration .1.3.6.1.4.1.789.1.5.5.2.1.10 |
slQTableProvide a report of the snapshots and their contents on the file systems. SEQUENCE OF SlQEntry .1.3.6.1.4.1.789.1.5.5.3 |
slQEntryProvide a report on a given snapshot for a given qtree on the file system. Indices select the volume and qtree of the snapshot and the snapshot entry itself. SlQEntry .1.3.6.1.4.1.789.1.5.5.3.1 |
slQIndexA number that identifies this entry for the referenced file system.ro Integer32 .1.3.6.1.4.1.789.1.5.5.3.1.1 |
slQVolumeA number that identifies the volume that contains this snapshot.ro Integer32 .1.3.6.1.4.1.789.1.5.5.3.1.2 |
slQQtreeA number that identifies the qtree that contains this snapshot.ro Integer32 .1.3.6.1.4.1.789.1.5.5.3.1.3 |
slQSnapshotNameThe name of the referenced snapshot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.5.3.1.4 |
slQSnapshotTimeTime of the snapshot on the system. The time in seconds since January 1, 1970.ro Integer32 .1.3.6.1.4.1.789.1.5.5.3.1.5 |
slQQtreeNameA string that indicates which qtree is in this snapshotro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.5.3.1.6 |
slQQtreeContentThe content of the qtree treero Enumeration .1.3.6.1.4.1.789.1.5.5.3.1.7 |
slQSourceThe source of this qtree for a replicated qtree. '-' for a original qtree.ro OCTET STRING .1.3.6.1.4.1.789.1.5.5.3.1.8 |
slQSourceTimeTime of the source snapshot for a replicated qtree. Time of the current snapshot for an original qtree. The time in seconds since January 1, 1970. 0 if the qtree is in a transitioning stagero Integer32 .1.3.6.1.4.1.789.1.5.5.3.1.9 |
slQVolumeNameThe name of the volume. This does not have a /vol/ prefix.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.5.3.1.10 |
dfNumberNumber of entries in the dfTable table.ro Integer32 .1.3.6.1.4.1.789.1.5.6 |
fsStatus OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.5.7 |
fsOverallStatusAn indication of overall file system health. 'ok' indicates that all file systems have adequate space. 'nearlyFull' means that one or more is nearly full (more than 95% full). 'full' means that one or more are more than 98% full.ro Enumeration .1.3.6.1.4.1.789.1.5.7.1 |
fsStatusMessageA string indicating any file systems which are full or nearly full.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.7.2 |
fsMaxUsedBytesPerCentThe percentage of space currently in use or reserved by the fullest file system.ro Integer32 .1.3.6.1.4.1.789.1.5.7.3 |
fsMaxUsedInodesPerCentThe percentage of inodes currently in use by the fullest file system.ro Integer32 .1.3.6.1.4.1.789.1.5.7.4 |
volTableList the volumes defined on the system, including offline volumes. SEQUENCE OF VolEntry .1.3.6.1.4.1.789.1.5.8 |
volEntryProvide details about a particular volume. For entries returned only from the cluster interfaces, if the volRowInfo is not set to 'available', the values reported by other fields of this table may not be valid. VolEntry .1.3.6.1.4.1.789.1.5.8.1 |
volIndexA number that identifies this volume. The volIndex is not related to any other table defined in this MIB, and may change as volumes are created and destroyed.ro Integer32 .1.3.6.1.4.1.789.1.5.8.1.1 |
volNameName of the volume. This includes no /vol/ prefix.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.2 |
volFSIDUnique identifier for this volume.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.3 |
volOwningHostIndication of which host owns this volume. This field is not supported in a cluster.ro Enumeration .1.3.6.1.4.1.789.1.5.8.1.4 |
volStateState of the volume, such as 'online' or 'offline'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.5 |
volStatusStatus of the volume, such as 'normal' or 'reconstructing'. May include several values separated by comma and space.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.6 |
volOptionsOptions associated with the volume, such as 'root' and 'nosnapdir=off'. May include several values separated by comma.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.7 |
volUUIDA unique id associated with the volume.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.8 |
volAggrNameName of the aggregate this flexible volume is a part of.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.9 |
volTypeType of this volume, older volumes are traditional while newer volumes contained in aggregates are flexible.ro Enumeration .1.3.6.1.4.1.789.1.5.8.1.10 |
volCloneTrue indicates flexible volume is a clone.ro Enumeration .1.3.6.1.4.1.789.1.5.8.1.11 |
volCloneOfName of flexible volume this flexible volume is a clone of.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.12 |
volCloneSnapName of original cloned snapshot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.13 |
volVserverVserver to which the volume belongs. Name from the cluster interfaces. Only applicable to cluster-mode volume.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.14 |
volMSIDThe volume's Mirror Set ID. MSIDs are formatted as 10-character strings composed of 8 hex characters prefixed with '0x'. Only applicable to cluster-mode volume.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.15 |
volDSIDThe volume's Data Set ID. DSIDs are formatted as 10-character strings composed of 8 hex characters prefixed with '0x'. Only applicable to cluster-mode volume.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.16 |
volSpaceGuaranteeEnabledWhether or not the space guarantee style associated with the volume is currently in effect. This field does not appear if the flexible volume is restricted or offline.ro Enumeration .1.3.6.1.4.1.789.1.5.8.1.17 |
volSpaceGuaranteeThe space guarantee style associated with the volume, such as 'volume', etc. This field does not appear if the flexible volume is restricted or offline.ro Enumeration .1.3.6.1.4.1.789.1.5.8.1.18 |
volLanguageThe language currently set for the volume. For example, 'English '.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.19 |
volLanguageCodeThe language code currently set for the volume. For example, 'en'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.20 |
volCloneChildrenListA comma separated list of all volume's child clones.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.21 |
volJunctionPathActiveIndicates if a Junction Path is active on this volume. This field is returned only from the cluster interfaces.ro Boolean .1.3.6.1.4.1.789.1.5.8.1.22 |
volJunctionPathThe mount path for the volume, relative to the root volume. This field is returned only from the cluster interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.23 |
volJunctionPathSourceSource directory of the Junction Path for this volume. This field is returned only from the cluster interfaces. Two possible values are 'LSM volume' for Load Share Mirror volumes 'RW volume' for Read-Write volumes.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.24 |
volRowInfoVolume is 'available' or 'partiallyAvailable'. This field is returned only from the cluster interfaces. Two possible values are: 'available' Indicates a normal case when everything went fine while fetching the values for the fields of this table and all values returned are valid. 'partiallyAvailable' Indicates something went wrong while fetching the values of the fields for this table and not all values are valid. For fields that could not be fetched, default values are set. For integers it is -1, for counters 0, and for string it is null.ro Enumeration .1.3.6.1.4.1.789.1.5.8.1.25 |
volNvfailIndicates whether nvfail option is enabled on this volume.ro Boolean .1.3.6.1.4.1.789.1.5.8.1.26 |
volInNvfailedStateIndicates whether the volume is in nvfailed state. This is only applicable to cluster-mode volumes.ro Boolean .1.3.6.1.4.1.789.1.5.8.1.27 |
volInstanceUUIDA unique id associated with the volume that moves with the volume when the volume is migrated.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.28 |
volProvenanceUUIDA unique id associated with the volume that identifies the source of the volume content.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.8.1.29 |
volNumberNumber of volumes in the volTable.ro Integer32 .1.3.6.1.4.1.789.1.5.9 |
qtreeTableProvide a list of the qtrees on the system. SEQUENCE OF QtreeEntry .1.3.6.1.4.1.789.1.5.10 |
qtreeEntryProvide details about a particular qtree. QtreeEntry .1.3.6.1.4.1.789.1.5.10.1 |
qtreeIndexIndex into the qtree table.ro Integer32 .1.3.6.1.4.1.789.1.5.10.1.1 |
qtreeVolumeA number that identifies the volume that contains this qtree.ro Integer32 .1.3.6.1.4.1.789.1.5.10.1.2 |
qtreeVolumeNameThe name of the volume that contains this qtree. This includes no /vol/prefix.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.10.1.3 |
qtreeIdThe Id number of the qtree.ro Integer32 .1.3.6.1.4.1.789.1.5.10.1.4 |
qtreeNameThe name of the qtree.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.10.1.5 |
qtreeStyleThe security style of the qtree.ro Enumeration .1.3.6.1.4.1.789.1.5.10.1.6 |
qtreeStatusThe status of the qtree.ro Enumeration .1.3.6.1.4.1.789.1.5.10.1.7 |
qtreeOplockAn indication of whether the oplocks is enabled or not for this qtree.ro Enumeration .1.3.6.1.4.1.789.1.5.10.1.8 |
qtreeVserverIndicates the vserver to which the volume belongs. Name from the cluster interfaces. Only applicable to cluster-mode volume.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.10.1.9 |
aggrTableList the aggregates defined on the system, including offline aggregates. SEQUENCE OF AggrEntry .1.3.6.1.4.1.789.1.5.11 |
aggrEntryProvide details about a particular aggregate. For entries returned only from the cluster interfaces, if the aggrRowInfo is not set to 'available', the values reported by other fields of this table may not be valid. AggrEntry .1.3.6.1.4.1.789.1.5.11.1 |
aggrIndexA number that identifies this aggregate. The aggrIndex is not related to any other table defined in this MIB, and may change as aggregates are created and destroyed.ro Integer32 .1.3.6.1.4.1.789.1.5.11.1.1 |
aggrNameName of the aggregate. This includes no /vol/ prefix.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.11.1.2 |
aggrFSIDUnique identifier for this aggregate.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.11.1.3 |
aggrOwningHostIndication of which host owns this aggregate. This field is not supported in a cluster.ro Enumeration .1.3.6.1.4.1.789.1.5.11.1.4 |
aggrStateState of the aggregate, such as 'online' or 'offline'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.11.1.5 |
aggrStatusStatus of the aggregate, such as 'normal' or 'reconstructing'. May include several values separated by comma and space.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.11.1.6 |
aggrOptionsOptions associated with the aggregate.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.11.1.7 |
aggrUUIDA unique id associated with the aggregate.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.11.1.8 |
aggrFlexvollistList of all the flexible volumes within this aggregate. This field is not supported in a cluster.ro OCTET STRING .1.3.6.1.4.1.789.1.5.11.1.9 |
aggrTypeType of this container, containers containing flexible volumes are aggregate.ro Enumeration .1.3.6.1.4.1.789.1.5.11.1.10 |
aggrRaidTypeType of raid protection of the aggregate, such as 'raid0', 'mirrored raid0', 'raid4', 'mirrored raid4', 'raid_dp', 'mirrored raid_dp'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.11.1.11 |
aggrHATypeAggregate failover type, such as 'cfo' for cluster failover, 'sfo' for storage failover. This is set to 'none' if aggregate failover type is not known.ro Enumeration .1.3.6.1.4.1.789.1.5.11.1.12 |
aggrOwnersCurrent owner(s) or the node(s) to which the aggregate belongs to. In case of striped aggregates, this will be a comma separated list of nodes to which the aggregate belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.11.1.13 |
aggrRowInfoAggregate is 'available' or 'partiallyAvailable'. This OID is available only from the cluster management interfaces. Two possible values are: 'available' : Indicates a normal case when everything went fine while fetching the values of the fields for this table and all values returned are valid. 'partiallyAvailable' : Indicates something went wrong while fetching the values of the fields for this table and not all the values are valid. For fields that could not be fetched, default values are set. For integers it is -1, for counters 0, and for string it is null.ro Enumeration .1.3.6.1.4.1.789.1.5.11.1.14 |
aggrVolumeFootprintsFootprint of data and metadata inside volumes belonging to the Aggregate.ro Counter64 .1.3.6.1.4.1.789.1.5.11.1.15 |
aggrVolumeFootprintsPercentFootprint of data and metadata inside volumes belonging to the aggregate as a percentage of aggregate size.ro Integer32 .1.3.6.1.4.1.789.1.5.11.1.16 |
aggrFilesystemMetadataMetadata of the Aggregate.ro Counter64 .1.3.6.1.4.1.789.1.5.11.1.17 |
aggrFilesystemMetadataPercentMetadata of the Aggregate as a percentage of Aggregate size.ro Integer32 .1.3.6.1.4.1.789.1.5.11.1.18 |
aggrNumberNumber of aggregates in the aggrTable.ro Integer32 .1.3.6.1.4.1.789.1.5.12 |
volMoveStatusTableStatus of Vol Move operation SEQUENCE OF VolMoveStatusEntry .1.3.6.1.4.1.789.1.5.13 |
volMoveStatusEntryProvide movement details of a particular volume VolMoveStatusEntry .1.3.6.1.4.1.789.1.5.13.1 |
volMoveIndexA number that identifies this volume. The volIndex is not related to any other table defined in this MIB, and may change as volumes are created and destroyed.ro INTEGER .1.3.6.1.4.1.789.1.5.13.1.1 |
volMoveSrcNameName of the vol move source volume. This will not have the /vol/ prefix.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.13.1.2 |
volMoveDstaggrNameName of the vol move destination aggregatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.13.1.3 |
volMoveCOattemptsMaximum Cutover attempts for specified vol move operationro Integer32 .1.3.6.1.4.1.789.1.5.13.1.4 |
volMoveCOtimeMaximum Cutover time for specified vol move operationro Integer32 .1.3.6.1.4.1.789.1.5.13.1.5 |
volMoveStateState of the vol move operationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.5.13.1.6 |
raid OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.6 |
raidTableDisplay RAID configuration information for the root volume. This table is deprecated - use raidVTable instead.deprecated SEQUENCE OF RaidEntry .1.3.6.1.4.1.789.1.6.1 |
raidEntryDisplay RAID configuration information for the referenced disk drive. This only works for disks contained within the root volume, and will include spare drives. This object is deprecated - use raidVEntry instead.deprecated RaidEntry .1.3.6.1.4.1.789.1.6.1.1 |
raidIndexA number that identifies this entry for the referenced disk drive.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.1.1.1 |
raidDiskNameThe name identifying the referenced disk drive.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.1.1.2 |
raidStatusThe status of the referenced disk drive.rodeprecated Enumeration .1.3.6.1.4.1.789.1.6.1.1.3 |
raidDiskIdThe disk identifier for the referenced disk drive.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.1.1.4 |
raidScsiAdapterThe identifier of the SCSI adapter for the referenced disk drive.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.1.1.5 |
raidScsiIdThe identifier for the referenced disk drive on the referenced SCSI adapter.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.1.1.6 |
raidUsedMbThe number of MBytes currently in use on the referenced disk drive.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.1.1.7 |
raidUsedBlocksThe number of Blocks currently in use on the referenced disk drive.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.1.1.8 |
raidTotalMbThe number of MBytes physically available on the referenced disk drive.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.1.1.9 |
raidTotalBlocksThe number of Blocks physically available on the referenced disk drive.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.1.1.10 |
raidCompletionPerCentIn the case when reconstruction/adding a spare, verification or scrubbing is in progress, the percent of such reconstruction, verification or scrubbing that has been completed on the referenced disk drive.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.1.1.11 |
raidVTableDisplay RAID configuration information. SEQUENCE OF RaidVEntry .1.3.6.1.4.1.789.1.6.2 |
raidVEntryDisplay RAID configuration information for the referenced volume, raid group, and disk drive. RaidVEntry .1.3.6.1.4.1.789.1.6.2.1 |
raidVIndexA number that identifies this disk drive within the given volume and RAID group.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.1 |
raidVDiskNameThe name identifying the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.2 |
raidVStatusThe status of the referenced disk drive.ro Enumeration .1.3.6.1.4.1.789.1.6.2.1.3 |
raidVDiskIdThe disk identifier for the referenced disk drive. This OID is not available from the Cluster management interfaces.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.4 |
raidVScsiAdapterThe identifier of the SCSI adapter for the referenced disk drive. This OID is not available from the Cluster management interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.5 |
raidVScsiIdThe identifier for the referenced disk drive on the referenced SCSI adapter. This OID is not available from the Cluster management interfaces.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.6 |
raidVUsedMbThe number of MBytes currently in use on the referenced disk drive.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.7 |
raidVUsedBlocksThe number of Blocks currently in use on the referenced disk drive. This object is deprecated. Use raidV64UsedBlocks object instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.2.1.8 |
raidVTotalMbThe number of MBytes physically available on the referenced disk drive.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.9 |
raidVTotalBlocksThe number of Blocks physically available on the referenced disk drive. This object is deprecated. Use raidV64TotalBlocks object instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.2.1.10 |
raidVCompletionPerCentIn the case when rapid raid recovery, disk copy, reconstruction/adding a spare, verification or scrubbing is in progress, the percent of such copy, reconstruction, verification or scrubbing that has been completed on the referenced disk drive.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.11 |
raidVVolA number that identifies the volume that this entry belongs to. The first volume is '1'.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.12 |
raidVGroupA number that identifies the RAID group within the given volume that this entry belongs to. The first RAID group is '1', and number across all plexes.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.13 |
raidVDiskNumberThe number of disks within this RAID group.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.14 |
raidVGroupNumberThe number of RAID groups within this volume.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.15 |
raidVDiskPortA number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. This OID is not available from the Cluster management interfaces.ro Enumeration .1.3.6.1.4.1.789.1.6.2.1.16 |
raidVSecondaryDiskNameThe name identifying the secondary path to the referenced disk drive. This OID is not available from the Cluster management interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.17 |
raidVSecondaryDiskPortA number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. This OID is not available from the Cluster management interfaces.ro Enumeration .1.3.6.1.4.1.789.1.6.2.1.18 |
raidVShelfNumber identifying the shelf where the disk is located.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.19 |
raidVBayNumber identifying the disk bay within the shelf where the disk is located.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.20 |
raidVPlexA number that identifies the plex within the given volume that this entry belongs to. The first plex is '1'.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.21 |
raidVPlexGroupA number that identifies the RAID group within the given plex that this entry belongs to. The first RAID group is '1'.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.22 |
raidVPlexNumberThe number of plexes within this volume. This number is always 1 or 2.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.23 |
raidVPlexNameA name that identifies the plex that this entry belongs to. A plex name can be anything, but is usually a string like 'plex0' or 'plex1'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.24 |
raidVSectorSizeA number that specifies bytes per sector for this entry. Values are '512' or '520'.ro Integer32 .1.3.6.1.4.1.789.1.6.2.1.25 |
raidVDiskSerialNumberSerial number of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.26 |
raidVDiskVendorThe vendor of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.27 |
raidVDiskModelModel string of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.28 |
raidVDiskFirmwareRevisionFirmware revision number of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.29 |
raidVDiskRPMRPM of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.30 |
raidVDiskTypeInterface type of the referenced disk drive. e.g SCSI, or ATA.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.31 |
raidVDiskPoolA name that identifies the disk pool that this entry belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.32 |
raidVDiskCopyDestDiskNameWhen raidVStatus value is prefailed, this string identifies the name of the disk which is the copy target of the referenced prefailed disk.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.33 |
raidVDiskUIDUnique identifier for the disk. The maximum length is 90 characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.34 |
raidV64UsedBlocksThe number of Blocks currently in use on the referenced disk drive. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.6.2.1.35 |
raidV64TotalBlocksThe number of Blocks physically available on the referenced disk drive. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.6.2.1.36 |
raidVCarrierIDUnique identifier of the disk carrier.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.2.1.37 |
spareTableDisplay spare disk configuration information. SEQUENCE OF SpareEntry .1.3.6.1.4.1.789.1.6.3 |
spareEntryDisplay configuration information for the referenced spare disk drive. SpareEntry .1.3.6.1.4.1.789.1.6.3.1 |
spareIndexA number that identifies this entry for the referenced disk drive in the list of spare disk drives.ro Integer32 .1.3.6.1.4.1.789.1.6.3.1.1 |
spareDiskNameThe name identifying the referenced spare disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.3.1.2 |
spareStatusThe status of the referenced spare disk drive.ro Enumeration .1.3.6.1.4.1.789.1.6.3.1.3 |
spareDiskIdThe disk identifier for the referenced spare disk drive. This OID is not available from the Cluster management interfaces.ro Integer32 .1.3.6.1.4.1.789.1.6.3.1.4 |
spareScsiAdapterThe identifier of the SCSI adapter for the referenced spare disk drive. This OID is not available from the Cluster management interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.3.1.5 |
spareScsiIdThe identifier for the referenced spare disk drive on the referenced SCSI adapter. This OID is not available from the Cluster management interfaces.ro Integer32 .1.3.6.1.4.1.789.1.6.3.1.6 |
spareTotalMbThe number of MBytes physically available on the referenced spare disk drive.ro Integer32 .1.3.6.1.4.1.789.1.6.3.1.7 |
spareTotalBlocksThe number of Blocks physically available on the referenced spare disk drive. This object is deprecated. Use spare64TotalBlocks object instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.3.1.8 |
spareDiskPortA number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. This OID is not available from the Cluster management interfaces.ro Enumeration .1.3.6.1.4.1.789.1.6.3.1.9 |
spareSecondaryDiskNameThe name identifying the secondary path to the referenced disk drive. This OID is not available from the Cluster management interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.3.1.10 |
spareSecondaryDiskPortA number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. This OID is not available from the Cluster management interfaces.ro Enumeration .1.3.6.1.4.1.789.1.6.3.1.11 |
spareShelfNumber identifying the shelf where the disk is located.ro Integer32 .1.3.6.1.4.1.789.1.6.3.1.12 |
spareBayNumber identifying the disk bay within the shelf where the disk is located.ro Integer32 .1.3.6.1.4.1.789.1.6.3.1.13 |
sparePoolA name that identifies the disk pool that this entry belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.3.1.14 |
spareSectorSizeA number that specifies bytes per sector for this entry. Values are '512' or '520'.ro Integer32 .1.3.6.1.4.1.789.1.6.3.1.15 |
spareDiskSerialNumberSerial number of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.3.1.16 |
spareDiskVendorThe vendor of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.3.1.17 |
spareDiskModelModel string of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.3.1.18 |
spareDiskFirmwareRevisionFirmware revision number of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.3.1.19 |
spareDiskRPMRPM of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.3.1.20 |
spareDiskTypeInterface type of the referenced disk drive. e.g SCSI, or ATA.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.3.1.21 |
spareDiskUIDExternal unique identifier for the disk. The Maximum length is 90 characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.3.1.22 |
spare64TotalBlocksThe number of Blocks physically available on the referenced spare disk drive. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.6.3.1.23 |
spareCarrierIDUnique identifier of the disk carrier.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.3.1.24 |
diskSummary OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.6.4 |
diskTotalCountThe total number of disks on the system.ro Integer32 .1.3.6.1.4.1.789.1.6.4.1 |
diskActiveCountThe number of disks which are currently active, including parity disks.ro Integer32 .1.3.6.1.4.1.789.1.6.4.2 |
diskReconstructingCountThe number of disks which are currently being reconstructed.ro Integer32 .1.3.6.1.4.1.789.1.6.4.3 |
diskReconstructingParityCountThe number of parity disks which are currently being reconstructed.ro Integer32 .1.3.6.1.4.1.789.1.6.4.4 |
diskVerifyingParityCountThe number of disks which are currently being verified.ro Integer32 .1.3.6.1.4.1.789.1.6.4.5 |
diskScrubbingCountThe number of disks which are currently being scrubbed.ro Integer32 .1.3.6.1.4.1.789.1.6.4.6 |
diskFailedCountThe number of disks which are currently broken.ro Integer32 .1.3.6.1.4.1.789.1.6.4.7 |
diskSpareCountThe number of available spare disks.ro Integer32 .1.3.6.1.4.1.789.1.6.4.8 |
diskAddingSpareCountThe number of spare disks which are currently being added into a RAID group.ro Integer32 .1.3.6.1.4.1.789.1.6.4.9 |
diskFailedMessageIf diskFailedCount is non-zero, this is a string describing the failed disk or disks. Each failed disk is described with a sentence like Parity disk in volume vol0, RAID group 1, failed. or Disk on adapter 8a, shelf 1, bay 0, failed. or Parity disk in aggregate aggr0, RAID group 1, failed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.4.10 |
diskPrefailedCountThe number of disks which are prefailed and marked for rapid raid recovery.ro Integer32 .1.3.6.1.4.1.789.1.6.4.11 |
raidVNumberNumber of entries in the raidVTable table. This is the total number of traditional volumes and aggregates in the system.ro Integer32 .1.3.6.1.4.1.789.1.6.5 |
spareNumberNumber of entries in the spareTable table.ro Integer32 .1.3.6.1.4.1.789.1.6.6 |
otherDiskNumberNumber of entries in the otherDiskTable table.ro Integer32 .1.3.6.1.4.1.789.1.6.7 |
raidPNumberNumber of entries in the raidPTable table. This is the total number of traditional volumes and aggregates in the system.ro Integer32 .1.3.6.1.4.1.789.1.6.8 |
otherDiskTableDisplay out-of-service disk configuration information. SEQUENCE OF OtherDiskEntry .1.3.6.1.4.1.789.1.6.9 |
otherDiskEntryDisplay configuration information for the referenced disk drive. OtherDiskEntry .1.3.6.1.4.1.789.1.6.9.1 |
otherDiskIndexA number that identifies this entry for the referenced disk drive in the list of out-of-service disk drives. Out-of-service disks include all disks that are not in service in a raid group or available as a spare disk.ro Integer32 .1.3.6.1.4.1.789.1.6.9.1.1 |
otherDiskDiskNameThe name identifying the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.9.1.2 |
otherDiskStatusThe status of the referenced disk drive.ro Enumeration .1.3.6.1.4.1.789.1.6.9.1.3 |
otherDiskDiskIdThe disk identifier for the referenced disk drive.ro Integer32 .1.3.6.1.4.1.789.1.6.9.1.4 |
otherDiskScsiAdapterThe identifier of the SCSI adapter for the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.9.1.5 |
otherDiskScsiIdThe identifier for the referenced disk drive on the referenced SCSI adapter.ro Integer32 .1.3.6.1.4.1.789.1.6.9.1.6 |
otherDiskTotalMbThe number of MBytes physically available on the referenced disk drive.ro Integer32 .1.3.6.1.4.1.789.1.6.9.1.7 |
otherDiskTotalBlocksThe number of Blocks physically available on the referenced disk drive. This object is deprecated. Use otherDisk64TotalBlocks object instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.9.1.8 |
otherDiskDiskPortA number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.ro Enumeration .1.3.6.1.4.1.789.1.6.9.1.9 |
otherDiskSecondaryDiskNameThe name identifying the secondary path to the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.9.1.10 |
otherDiskSecondaryDiskPortA number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.ro Enumeration .1.3.6.1.4.1.789.1.6.9.1.11 |
otherDiskShelfNumber identifying the shelf where the disk is located.ro Integer32 .1.3.6.1.4.1.789.1.6.9.1.12 |
otherDiskBayNumber identifying the disk bay within the shelf where the disk is located.ro Integer32 .1.3.6.1.4.1.789.1.6.9.1.13 |
otherDiskPoolA name that identifies the disk pool that this entry belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.9.1.14 |
otherDiskSectorSizeA number that specifies bytes per sector for this entry. Values are '512' or '520'.ro Integer32 .1.3.6.1.4.1.789.1.6.9.1.15 |
otherDiskSerialNumberSerial number of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.9.1.16 |
otherDiskVendorThe vendor of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.9.1.17 |
otherDiskModelModel string of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.9.1.18 |
otherDiskFirmwareRevisionFirmware revision number of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.9.1.19 |
otherDiskRPMRPM of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.9.1.20 |
otherDiskTypeInterface type of the referenced disk drive. e.g SCSI, or ATA.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.9.1.21 |
otherDisk64TotalBlocksThe number of Blocks physically available on the referenced disk drive. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.6.9.1.22 |
otherDiskCarrierIDUnique identifier of the disk carrier.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.9.1.23 |
raidPTableDisplay RAID configuration information. SEQUENCE OF RaidPEntry .1.3.6.1.4.1.789.1.6.10 |
raidPEntryDisplay RAID configuration information for the referenced volume, plex, raid group, and disk drive. RaidPEntry .1.3.6.1.4.1.789.1.6.10.1 |
raidPIndexA number that identifies this disk drive within the given volume and RAID group.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.1 |
raidPStatusThe status of the referenced disk drive.ro Enumeration .1.3.6.1.4.1.789.1.6.10.1.2 |
raidPVolA number that identifies the volume that this entry belongs to. The first volume is '1'.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.3 |
raidPPlexA number that identifies the plex that this entry belongs to. The first plex is '1'.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.4 |
raidPGroupA number that identifies the RAID group within the given plex that this entry belongs to. The first RAID group is '1'.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.5 |
raidPPlexNumberThe number of plexes within this volume. This number is always 1 or 2.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.6 |
raidPGroupNumberThe number of RAID groups within this plex.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.7 |
raidPDiskNumberThe number of disks within this RAID group.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.8 |
raidPPlexNameA name that identifies the plex that this entry belongs to. A plex name can be anything, but is usually a string like 'plex0' or 'plex1'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.10.1.9 |
raidPDiskNameThe name identifying the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.10.1.10 |
raidPDiskPortA number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.ro Enumeration .1.3.6.1.4.1.789.1.6.10.1.11 |
raidPSecondaryDiskNameThe name identifying the secondary path to the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.10.1.12 |
raidPSecondaryDiskPortA number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.ro Enumeration .1.3.6.1.4.1.789.1.6.10.1.13 |
raidPScsiAdapterThe identifier of the SCSI adapter for the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.10.1.14 |
raidPScsiIdThe identifier for the referenced disk drive on the referenced SCSI adapter.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.15 |
raidPDiskIdThe disk identifier for the referenced disk drive.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.16 |
raidPShelfNumber identifying the shelf where the disk is located.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.17 |
raidPBayNumber identifying the disk bay within the shelf where the disk is located.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.18 |
raidPSectorSizeA number that specifies bytes per sector for this entry. Values are '512' or '520'.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.19 |
raidPUsedMbThe number of MBytes currently in use on the referenced disk drive.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.20 |
raidPUsedBlocksThe number of Blocks currently in use on the referenced disk drive. This object is deprecated. Use raidP64UsedBlocks object instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.10.1.21 |
raidPTotalMbThe number of MBytes physically available on the referenced disk drive.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.22 |
raidPTotalBlocksThe number of Blocks physically available on the referenced disk drive. This object is deprecated. Use raidP64TotalBlocks object instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.10.1.23 |
raidPCompletionPerCentIn the case when rapid raid recovery, disk copy, reconstruction or adding a spare, verification or scrubbing is in progress, the percent of such copy, reconstruction, verification or scrubbing that has been completed on the referenced disk drive.ro Integer32 .1.3.6.1.4.1.789.1.6.10.1.24 |
raidPDiskSerialNumberSerial number of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.10.1.25 |
raidPDiskVendorThe vendor of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.10.1.26 |
raidPDiskModelModel string of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.10.1.27 |
raidPDiskFirmwareRevisionFirmware revision number of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.10.1.28 |
raidPDiskRPMRPM of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.10.1.29 |
raidPDiskTypeInterface type of the referenced disk drive. e.g SCSI, or ATA.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.10.1.30 |
raidPDiskPoolA name that identifies the disk pool that this entry belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.10.1.31 |
raidPDiskCopyDestDiskNameWhen raidPStatus value is prefailed, this string identifies the name of the disk which is the copy target of the referenced prefailed disk.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.10.1.32 |
raidP64UsedBlocksThe number of Blocks currently in use on the referenced disk drive. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.6.10.1.33 |
raidP64TotalBlocksThe number of Blocks physically available on the referenced disk drive. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.6.10.1.34 |
raidPCarrierIDUnique identifier of the disk carrier.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.10.1.35 |
plexTableA table containing plex specific information. SEQUENCE OF PlexEntry .1.3.6.1.4.1.789.1.6.11 |
plexEntryProvide a report on file system plexes. PlexEntry .1.3.6.1.4.1.789.1.6.11.1 |
plexIndexA number that identifies this entry for the referenced plex.ro Integer32 .1.3.6.1.4.1.789.1.6.11.1.1 |
plexNameThe identifier of the plex.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.11.1.2 |
plexVolNameThe volume to which this plex belongs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.11.1.3 |
plexStatusThe status of the plex.ro Enumeration .1.3.6.1.4.1.789.1.6.11.1.4 |
plexPercentResyncingIf the plex is resyncing, the percent completion of the resync.ro Integer32 .1.3.6.1.4.1.789.1.6.11.1.5 |
outOfDateDiskCountNumber of entries in the outOfDateDiskTable table.ro Integer32 .1.3.6.1.4.1.789.1.6.12 |
outOfDateDiskTableDisplay out-of-date disk information. SEQUENCE OF OutOfDateDiskEntry .1.3.6.1.4.1.789.1.6.13 |
outOfDateDiskEntryDisplay information for the referenced out-of-date disk. OutOfDateDiskEntry .1.3.6.1.4.1.789.1.6.13.1 |
outOfDateDiskIndexA number that identifies this entry for the referenced disk drive in the list of out-of-date diskdrives.ro Integer32 .1.3.6.1.4.1.789.1.6.13.1.1 |
outOfDateDiskDiskNameThe name identifying the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.13.1.2 |
outOfDateDiskDiskIdThe disk identifier for the referenced disk drive.ro Integer32 .1.3.6.1.4.1.789.1.6.13.1.3 |
outOfDateDiskScsiAdapterThe identifier of the SCSI adapter for the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.13.1.4 |
outOfDateDiskScsiIdThe identifier for the referenced disk drive on the referenced SCSI adapter.ro Integer32 .1.3.6.1.4.1.789.1.6.13.1.5 |
outOfDateDiskTotalMbThe number of MBytes physically available on the referenced disk drive.ro Integer32 .1.3.6.1.4.1.789.1.6.13.1.6 |
outOfDateDiskTotalBlocksThe number of Blocks physically available on the referenced disk drive. This object is deprecated. Use outOfDateDisk64TotalBlocks object instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.6.13.1.7 |
outOfDateDiskDiskPortA number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.ro Enumeration .1.3.6.1.4.1.789.1.6.13.1.8 |
outOfDateDiskSecondaryDiskNameThe name identifying the secondary path to the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.13.1.9 |
outOfDateDiskSecondaryDiskPortA number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone.ro Enumeration .1.3.6.1.4.1.789.1.6.13.1.10 |
outOfDateDiskShelfNumber identifying the shelf where the disk is located.ro Integer32 .1.3.6.1.4.1.789.1.6.13.1.11 |
outOfDateDiskBayNumber identifying the disk bay within the shelf where the disk is located.ro Integer32 .1.3.6.1.4.1.789.1.6.13.1.12 |
outOfDateDiskPoolA name that identifies the disk pool that this entry belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.13.1.13 |
outOfDateDiskSectorSizeA number that specifies bytes per sector for this entry. Values are '512' or '520'.ro Integer32 .1.3.6.1.4.1.789.1.6.13.1.14 |
outOfDateDiskSerialNumberSerial number of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.13.1.15 |
outOfDateDiskVendorThe vendor of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.13.1.16 |
outOfDateDiskModelModel string of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.13.1.17 |
outOfDateDiskFirmwareRevisionFirmware revision number of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.13.1.18 |
outOfDateDiskRPMRPM of the referenced disk drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.13.1.19 |
outOfDateDiskTypeInterface type of the referenced disk drive. e.g SCSI, or ATA.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.13.1.20 |
outOfDateDisk64TotalBlocksThe number of Blocks physically available on the referenced disk drive. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.6.13.1.21 |
outOfDateDiskCarrierIDUnique identifier of the disk carrier.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.6.13.1.22 |
cifs OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.7 |
cifsOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.7.1 |
cifsIsEnabledWhether the CIFS protocol is active on the filer.ro Enumeration .1.3.6.1.4.1.789.1.7.1.1 |
cifsIsLoginEnabledWhether new CIFS connections to the filer are currently allowed.ro Enumeration .1.3.6.1.4.1.789.1.7.1.2 |
cifsHostNameThe host name used by the CIFS protocol on this filer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.7.1.3 |
cifsAltNamesAlternate names recognized by the filer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.7.1.4 |
cifsDomainJoinedHas the filer joined an NT domain? If this value is true, cifsDomainName will contain the name of the domain. Otherwise, the filer may have joined a WorkGroup, and cifsWGName will contain the name of the WorkGroup.ro Enumeration .1.3.6.1.4.1.789.1.7.1.5 |
cifsDomainNameThe domain name used by the CIFS protocol on this filer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.7.1.6 |
cifsWGNameThe workgroup name (if any) used by the CIFS protocol on this filer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.7.1.7 |
cifsDCNameThe name of the Domain Controller used by this filer to authenticate users and file requests.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.7.1.8 |
cifsIsWinsEnabledTrue if WINS name resolution is enabled on the filer.ro Enumeration .1.3.6.1.4.1.789.1.7.1.9 |
cifsWinsServersThe name(s) of the WINS servers registered with the filer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.7.1.10 |
cifsSecurityModelWhich type of authentication semantics (Unix or PC) are in use for PC access to Unix files on the filer. If Unix semantics are in use, no ACL on a Unix file is ever checked. If PC semantics are in use, the share level ACL on the share containing the file is used for authentication instead of the group portion of the permissions on the file.ro Enumeration .1.3.6.1.4.1.789.1.7.1.11 |
cifsPCGenericUserThe name of the generic PC user, if any. This username is used for CIFS access by Unix users who have not authenticated through CIFS or NT.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.7.1.12 |
cifsOplocksEnabledWhether oplocks are enabled on the filer.ro Enumeration .1.3.6.1.4.1.789.1.7.1.15 |
cifsLevel2OplocksEnabledWhether level 2 oplocks are enabled on the filer.ro Enumeration .1.3.6.1.4.1.789.1.7.1.16 |
cifsPreserveCaseIf this option is set to preserve-case (the default), all filename references will be case preserving. Otherwise, they are forced to lowercase.ro Enumeration .1.3.6.1.4.1.789.1.7.1.17 |
cifsSymlinksEnabledIf this option is enabled, CIFS accesses will follow symbolic links using Unix semantics.ro Enumeration .1.3.6.1.4.1.789.1.7.1.19 |
cifsSymlinkCycleProtEnabledIf this option is enabled, CIFS accesses will through symbolic links will check for cycles in the link graph.ro Enumeration .1.3.6.1.4.1.789.1.7.1.20 |
cifsIsLicensedWhether the CIFS protocol is licensed on the filer.ro Enumeration .1.3.6.1.4.1.789.1.7.1.21 |
cifsPerClientStatsEnabledTrue when cifs.per_client_stats are being collected.ro Enumeration .1.3.6.1.4.1.789.1.7.1.22 |
cifsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.7.2 |
cifsStatusEncoding of CIFS startup state on the filer.ro Integer32 .1.3.6.1.4.1.789.1.7.2.1 |
cifsNeedPWDoes the administrative password need to be set before start?ro Integer32 .1.3.6.1.4.1.789.1.7.2.2 |
cifsTimeToShutdownTime remaining until CIFS shutdownro Integer32 .1.3.6.1.4.1.789.1.7.2.3 |
cifsMaxConnectionsThe maximum number of simultaneous CIFS connections allowed on the filer.ro Integer32 .1.3.6.1.4.1.789.1.7.2.4 |
cifsMaxTreesThe maximum number of simultaneous CIFS trees allowed on the filer.ro Integer32 .1.3.6.1.4.1.789.1.7.2.5 |
cifsMaxSharesThe maximum number of simultaneous CIFS shares allowed on the filer.ro Integer32 .1.3.6.1.4.1.789.1.7.2.6 |
cifsMaxFilesThe maximum number of concurrently open CIFS files and directories allowed on the filer.ro Integer32 .1.3.6.1.4.1.789.1.7.2.7 |
cifsMaxACLsThis object is deprecated, and always has a value of 0.ro Integer32 .1.3.6.1.4.1.789.1.7.2.8 |
cifsConnectedUsersThe current number of CIFS users on the filer.ro Counter32 .1.3.6.1.4.1.789.1.7.2.9 |
cifsNTreesThe current number of CIFS trees on the filer.ro Counter32 .1.3.6.1.4.1.789.1.7.2.10 |
cifsNSharesThe current number of CIFS shares on the filer.ro Counter32 .1.3.6.1.4.1.789.1.7.2.11 |
cifsNSessionsThe current number of active CIFS sessions on the filer.ro Counter32 .1.3.6.1.4.1.789.1.7.2.12 |
cifsNOpenFilesThe number of open CIFS files and directories on the filer.ro Counter32 .1.3.6.1.4.1.789.1.7.2.13 |
cifsNOpenDirsThe number of open CIFS directories on the filer.ro Counter32 .1.3.6.1.4.1.789.1.7.2.14 |
cifsNOplockBreakWaitsThe number of open files waiting for oplock break messages to be sent.ro Counter32 .1.3.6.1.4.1.789.1.7.2.16 |
cifsNOplockAckWaitsThe number of open files waiting for acknowledgements to oplock break messages.ro Counter32 .1.3.6.1.4.1.789.1.7.2.17 |
cifsSuspectOpsA smoothed average of the number of events per second of the type frequently seen during virus attacks.ro Integer32 .1.3.6.1.4.1.789.1.7.2.18 |
cifsNDomainControllersThe number of Domain Controllers found.ro Integer32 .1.3.6.1.4.1.789.1.7.2.19 |
cifsStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.7.3 |
cifsServ OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.7.3.1 |
cifsOps OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.7.3.1.1 |
cifsTotalOpsThe number of CIFS operations done by the filer, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.1.1 |
cifsTotalCallsThe total number of CIFS calls received, since the last time the statistics were cleared. This is the number of cifsTotalOps plus the number of miscellaneous operations that are not logged which were received in that time period.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.1.2 |
cifsBadCallsThe total number of received CIFS calls rejected, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.1.3 |
cifsGetAttrsThe total number of CIFS operations to get the attributes on a file or directory, since the last time the statistics were reset.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.1.4 |
cifsReadsThe total number of CIFS Read operations on a file or directory, since the last time the statistics were reset.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.1.5 |
cifsWritesThe total number of CIFS write operations on a file or directory, since the last time the statistics were reset.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.1.6 |
cifsLocksThe number of CIFS file locking requests since the last time the statistics were reset.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.1.7 |
cifsOpensThe number of calls, via CIFS, to open a file or directory, since the last time the statistics were reset.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.1.8 |
cifsDirOpsThe number of CIFS directory operations, since the last time the statistics were reset.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.1.9 |
cifsOthersThe number of CIFS operations, since the last time the statistics were reset, that don't fall into the categories for GetAttr, SetAttr, Read, Write, Lock, DirOp and Open.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.1.10 |
cifsSetAttrsThe total number of CIFS operations to set the attributes on a file or directory, since the last time the statistics were reset.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.1.11 |
cifsReqs OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.7.3.1.2 |
smbNegProtsThe number of SMB NEGOTIATE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.1 |
smbSessionSetupAndXsThe number of SMB SESSION_SETUP_ANDX requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.2 |
smbLogoffAndXsThe number of SMB LOGOFF_ANDX requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.3 |
smbTreeConnectAndXsThe number of SMB TREE_CONNECT_ANDX requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.4 |
smbTreeDisconnectsThe number of SMB TREE_DISCONNECT requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.5 |
smbTrans2QueryFSInfosThe number of SMB TRANS2_QUERY_FS_INFORMATION requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.6 |
smbEchosThe number of SMB ECHO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.7 |
smbNTCancelsThe number of SMB NT_CANCEL requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.8 |
smbNTCreateAndXsThe number of SMB NT_CREATE_ANDX requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.9 |
smbNTTransactCreatesThe number of SMB NT_TRANSACT_CREATE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.10 |
smbCreateTemporariesThe SMB CREATE_TEMPORARY operation is not presently supported, so this value should always be zero.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.11 |
smbReadAndXsThe number of SMB READ_ANDX requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.12 |
smbWriteAndXsThe number of SMB WRITE_ANDX requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.13 |
smbLockingAndXsThe number of SMB LOCKING_ANDX requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.14 |
smbSeeksThe number of SMB SEEK requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.15 |
smbFlushesThe number of SMB FLUSH requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.16 |
smbClosesThe number of SMB CLOSE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.17 |
smbDeletesThe number of SMB DELETE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.18 |
smbRenamesThe number of SMB RENAME requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.19 |
smbMovesThe SMB MOVE request is not presently supported, so this value should always be zero.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.20 |
smbCopiesThe SMB COPY request is not presently supported, so this value should always be zero.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.21 |
smbTrans2QueryPathInfosThe number of SMB TRANS2_QUERY_PATH_INFORMATION requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.22 |
smbTrans2QueryFileInfosThe number of SMB TRANS2_QUERY_FILE_INFORMATION requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.23 |
smbTrans2SetPathInfosThe number of SMB TRANS2_SET_PATH_INFORMATION requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.24 |
smbTrans2SetFileInfosThe number of SMB TRANS2_SET_FILE_INFORMATION requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.25 |
smbDeleteDirsThe number of SMB DELETE_DIRECTORY requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.26 |
smbCheckDirsThe SMB COPY request is not presently supported, so this value should always be zero.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.27 |
smbTrans2FindFirst2sThe number of SMB TRANS2_FIND_FIRST2 requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.28 |
smbTrans2FindNext2sThe number of SMB TRANS2_FIND_NEXT2 requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.29 |
smbFindClose2sThe number of SMB FIND_CLOSE2 requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.30 |
smbNTTransactNotifyChgsThe number of SMB NT_TRANSACT_NOTIFY_CHANGE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.31 |
smbTrans2GetDFSReferralsThe SMB TRANS2_GET_DFS_REFERRAL request is not presently supported, so this value should always be zero.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.32 |
smbTrans2ReportDFSIncsThe SMB TRANS2_REPORT_DFS_INCONSISTENCY request is not presently supported, so this value should always be zero.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.33 |
smbOpenPrintFilesThe SMB OPEN_PRINT_FILE request is not supported, so this value should always be zero.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.34 |
smbGetPrintQueuesThe SMB GET_PRINT_QUEUE request is not supported, so this value should always be zero.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.35 |
smbNTTransactIoctlsThe number of SMB NT_TRANSACT_IOCTL requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.36 |
smbNTTransactQuerySecDescsThe number of SMB NT_TRANSACT_QUERY_SECURITY_DESC requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.37 |
smbNTTransactSetSecDescsThe number of SMB NT_TRANSACT_SET_SECURITY_DESC requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.38 |
smbTrans2CreateDirsThe number of SMB TRANS2_CREATE_DIRECTORY requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.39 |
smbNTCancelCNsThe number of SMB NT_CANCEL requests against change notifications since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.40 |
smbNTCancelOthersThe number of SMB NT_CANCEL requests against operations other than change notifications, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.41 |
smb2EchosThe number of SMB2 ECHO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.42 |
smb2NegProtsThe number of SMB2 NEGOTIATE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.43 |
smb2SessionSetupsThe number of SMB2 SESSION_SETUP requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.44 |
smb2LogoffsThe number of SMB2 LOGOFF requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.45 |
smb2TreeConnectsThe number of SMB2 TREE_CONNECT requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.46 |
smb2TreeDisconnectsThe number of SMB2 TREE_DISCONNECT requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.47 |
smb2CancelsThe number of SMB2 CANCEL requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.48 |
smb2CreatesThe number of SMB2 CREATE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.49 |
smb2IpcCreatesThe number of SMB2 IPC CREATE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.50 |
smb2ReadsThe number of SMB2 READ requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.51 |
smb2WritesThe number of SMB2 WRITE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.52 |
smb2IpcReadsThe number of SMB2 IPC READ requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.53 |
smb2IpcWritesThe number of SMB2 IPC WRITE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.54 |
smb2LocksThe number of SMB2 LOCK requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.55 |
smb2UnLocksThe number of SMB2 UNLOCK requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.56 |
smb2OplkBrkAckThe number of SMB2 Oplock Break Acknowledgements, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.57 |
smb2FlushsThe number of SMB2 FLUSH requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.58 |
smb2ClosesThe number of SMB2 CLOSE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.59 |
smb2QueryFileBasicInfosThe number of SMB2 QUERY_FILE_BASIC_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.60 |
smb2QueryFileStandardInfosThe number of SMB2 QUERY_FILE_STANDARD_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.61 |
smb2QueryFileInternalInfosThe number of SMB2 QUERY_FILE_INT_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.62 |
smb2QueryFileEAInfosThe number of SMB2 QUERY_FILE_EA_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.63 |
smb2QueryFileFullEAInfosThe number of SMB2 QUERY_FILE_FULL_EA_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.64 |
smb2QueryFileModeInfosThe number of SMB2 QUERY_FILE_MODE_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.65 |
smb2QueryFileAltNamesThe number of SMB2 QUERY_FILE_ALT_NAME_INFO_ requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.66 |
smb2QueryFileStreamInfosThe number of SMB2 QUERY_FILE_STREAM_INFO_ requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.67 |
smb2QueryFileNetOpenInfosThe number of SMB2 QUERY_FILE_NET_OPEN_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.68 |
smb2QueryFileAttrTagInfosThe number of SMB2 QUERY_FILE_ATTR_TAG_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.69 |
smb2QueryFileUnsupportedsThe number of SMB2 Unsupported QUERY_FILE_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.70 |
smb2QueryFileInvalidsThe number of SMB2 invalid QUERY_FILE_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.71 |
smb2QueryFsVolInfosThe number of SMB2 QUERY_FS_VOLUME_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.72 |
smb2QueryFsSizeInfosThe number of SMB2 QUERY_FS_SIZE_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.73 |
smb2QueryFsDeviceInfosThe number of SMB2 QUERY_FS_DEVICE_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.74 |
smb2QueryFsAttrInfosThe number of SMB2 QUERY_FS_ATTR_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.75 |
smb2QueryFsFullSizeInfosThe number of SMB2 QUERY_FS_FULL_SIZE_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.76 |
smb2QueryFsObjectIdInfosThe number of SMB2 QUERY_FS_OBJECT_ID_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.77 |
smb2QueryFsInvalidsThe number of SMB2 invalid QUERY_FS_INFO requestd, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.78 |
smb2SetBasicInfosThe number of SMB2 SET_BASIC_INFO requesed, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.79 |
smb2SetRenameInfosThe number of SMB2 SET_FILE_RENAME_INFO requeved, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.80 |
smb2SetFileLinkInfosThe number of SMB2 SET_FILE_LINK_INFO requived, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.81 |
smb2SetFileDispInfosThe number of SMB2 SET_FILE_DISP_INFO reqeived, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.82 |
smb2SetFullEaInfosThe number of SMB2 SET_FULL_EA_INFO received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.83 |
smb2SetModeInfosThe number of SMB2 SET_MODE_INFO received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.84 |
smb2SetAllocInfosThe number of SMB2 SET_ALLOC_INFO received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.85 |
smb2SetEofInfosThe number of SMB2 SET_EOF_INFO received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.86 |
smb2SetInfoUnsupportedsThe number of SMB2 Unsupported SET_INFO received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.87 |
smb2SetInfoInvalidsThe number of invalid SMB2 SET_INFO received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.88 |
smb2FsctlPipeTransceivesThe number of SMB2 FSCTL_PIPE_TRANSCEIVE received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.89 |
smb2FsctlPipePeeksThe number of SMB2 FSCTL_PIPE_PEEK received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.90 |
smb2FsctlEnumSnapshotssThe number of SMB2 FSCTL_ENUMERATE_SNAPSHOTS received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.91 |
smb2FsctlDfsReferralssThe number of SMB2 FSCTL_DFS_REFERRALS received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.92 |
smb2FsctlSetSparsesThe number of SMB2 FSCTL_SET_SPARSE received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.93 |
smb2FsctlSecureSharesThe number of SMB2 FSCTL_SECURE_SHARE received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.94 |
smb2FsctlFileUnsupportedsThe number of Unsupported SMB2 File FSCTL received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.95 |
smb2FsctlIpcUnsupportedsThe number of Unsupported SMB2 IPC FSCTL received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.96 |
smb2QueryDirsThe number of SMB2 QUERY_DIR received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.97 |
smb2ChgNfysThe number of SMB2 CHANGE_NOTIFY received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.98 |
smb2QuerySecurityInfosThe number of SMB2 QUERY_INFO SECURITY requests received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.99 |
smb2SetSecurityInfosThe number of SMB2 SET_INFO SECURITY requests received, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.100 |
smb2QueryFileAccessInfosThe number of SMB2 QUERY_FILE_ACCESS_INFO requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.2.101 |
cifsPercent OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.7.3.1.3 |
smbNegProtPctThe number of SMB NEGOTIATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.1 |
smbSessionSetupAndXPctThe number of SMB SESSION_SETUP_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.2 |
smbLogoffAndXPctThe number of SMB LOGOFF_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.3 |
smbTreeConnectAndXPctThe number of SMB TREE_CONNECT_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.4 |
smbTreeDisconnectAndXPctThe number of SMB TREE_DISCONNECT_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.5 |
smbTrans2QueryFSInfoPctThe number of SMB TRANS2_QUERY_FS_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.6 |
smbEchoPctThe number of SMB ECHO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.7 |
smbNTCancelPctThe number of SMB NT_CANCEL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.8 |
smbCreateAndXPctThe number of SMB NT_CREATE_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.9 |
smbTransactCreatePctThe number of SMB NT_TRANSACT_CREATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.10 |
smbCreateTemporaryPctThe number of SMB CREATE_TEMPORARY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.11 |
smbReadAndXPctThe number of SMB READ_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.12 |
smbWriteAndXPctThe number of SMB WRITE_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.13 |
smbLockingAndXPctThe number of SMB LOCKING_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.14 |
smbSeekPctThe number of SMB SEEK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.15 |
smbFlushPctThe number of SMB FLUSH requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.16 |
smbClosePctThe number of SMB CLOSE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.17 |
smbDeletePctThe number of SMB DELETE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.18 |
smbRenamePctThe number of SMB RENAME requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.19 |
smbMovePctThe number of SMB MOVE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.20 |
smbCopyPctThe number of SMB COPY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.21 |
smbTrans2QueryPathInfoPctThe number of SMB TRANS2_QUERY_PATH_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.22 |
smbTrans2QueryFileInfoPctThe number of SMB TRANS2_QUERY_FILE_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.23 |
smbTrans2SetPathInfoPctThe number of SMB TRANS2_SET_PATH_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.24 |
smbTrans2SetFileInfoPctThe number of SMB TRANS2_SET_FILE_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.25 |
smbDeleteDirPctThe number of SMB DELETE_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.26 |
smbCheckDirPctThe number of SMB CHECK_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.27 |
smbTrans2FindFirst2PctThe number of SMB TRANS2_FIND_FIRST2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.28 |
smbTrans2FindNext2PctThe number of SMB TRANS2_FIND_NEXT2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.29 |
smbFindClose2PctThe number of SMB FIND_CLOSE2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.30 |
smbNTTransactNotifyChgPctThe number of SMB NT_TRANSACT_NOTIFY_CHANGE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.31 |
smbTrans2GetDFSReferralPctThe number of SMB TRANS2_GET_DFS_REFERRAL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.32 |
smbTrans2ReportDFSIncPctThe number of SMB TRANS2_REPORT_DFS_INCONSISTENCY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.33 |
smbOpenPrintFilePctThe number of SMB OPEN_PRINT_FILE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.34 |
smbGetPrintQueuePctThe number of SMB GET_PRINT_QUEUE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.35 |
smbNTTransactIoctlPctThe number of SMB NT_TRANSACT_IOCTL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.36 |
smbNTTransactQuerySecDescPctThe number of SMB NT_TRANSACT_QUERY_SECURITY_DESC requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.37 |
smbNTTransactSetSecDescPctThe number of SMB NT_TRANSACT_SET_SECURITY_DESC requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.38 |
smbTrans2CreateDirPctThe number of SMB TRANS2_CREATE_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.39 |
smbNTCancelCNPctThe number of SMB NT_CANCEL requests against change notifications, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.40 |
smbNTCancelOtherPctThe number of SMB NT_CANCEL requests against calls other than change notifications, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.41 |
smb2EchoPctThe number of SMB2 ECHO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.42 |
smb2NegProtPctThe number of SMB2 NEGOTIATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.43 |
smb2SessionSetupPctThe number of SMB2 SESSION_SETUP requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.44 |
smb2LogoffPctThe number of SMB2 LOGOFF requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.45 |
smb2TreeConnectPctThe number of SMB2 TREE_CONNECT requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.46 |
smb2TreeDisconnectPctThe number of SMB2 TREE_DISCONNECT requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.47 |
smb2CancelPctThe number of SMB2 CANCEL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.48 |
smb2CreatePctThe number of SMB2 CREATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.49 |
smb2IpcCreatePctThe number of SMB2 IPC CREATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.50 |
smb2ReadPctThe number of SMB2 READ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.51 |
smb2WritePctThe number of SMB2 WRITE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.52 |
smb2IpcReadPctThe number of SMB2 IPC READ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.53 |
smb2IpcWritePctThe number of SMB2 IPC WRITE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.54 |
smb2LockPctThe number of SMB2 LOCK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.55 |
smb2UnLockPctThe number of SMB2 UNLOCK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.56 |
smb2OplkBrkAckPctThe number of SMB2 Oplock Break Acknowledgement, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.57 |
smb2FlushPctThe number of SMB2 FLUSH requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.58 |
smb2ClosePctThe number of SMB2 CLOSE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.59 |
smb2QueryFileBasicInfoPctThe number of SMB2 QUERY_FILE_BASIC_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.60 |
smb2QueryFileStandardInfoPctThe number of SMB2 QUERY_FILE_STANDARD_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.61 |
smb2QueryFileInternalInfoPctThe number of SMB2 QUERY_FILE_INT_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.62 |
smb2QueryFileEAInfoPctThe number of SMB2 QUERY_FILE_EA_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.63 |
smb2QueryFileFullEAInfoPctThe number of SMB2 QUERY_FILE_FULL_EA_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.64 |
smb2QueryFileModeInfoPctThe number of SMB2 QUERY_FILE_MODE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.65 |
smb2QueryFileAltNamePctThe number of SMB2 QUERY_FILE_ALT_NAME_INFO_ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.66 |
smb2QueryFileStreamInfoPctThe number of SMB2 QUERY_FILE_STREAM_INFO_ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.67 |
smb2QueryFileNetOpenInfoPctThe number of SMB2 QUERY_FILE_NET_OPEN_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.68 |
smb2QueryFileAttrTagInfoPctThe number of SMB2 QUERY_FILE_ATTR_TAG_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.69 |
smb2QueryFileUnsupportedPctThe number of SMB2 Unsupported QUERY_FILE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.70 |
smb2QueryFileInvalidPctThe number of SMB2 invalid QUERY_FILE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.71 |
smb2QueryFsVolInfoPctThe number of SMB2 QUERY_FS_VOLUME_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.72 |
smb2QueryFsSizeInfoPctThe number of SMB2 QUERY_FS_SIZE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.73 |
smb2QueryFsDeviceInfoPctThe number of SMB2 QUERY_FS_DEVICE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.74 |
smb2QueryFsAttrInfoPctThe number of SMB2 QUERY_FS_ATTR_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.75 |
smb2QueryFsFullSizeInfoPctThe number of SMB2 QUERY_FS_FULL_SIZE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.76 |
smb2QueryFsObjectIdInfoPctThe number of SMB2 QUERY_FS_OBJECT_ID_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.77 |
smb2QueryFsInvalidPctThe number of SMB2 invalid QUERY_FS_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.78 |
smb2SetBasicInfoPctThe number of SMB2 SET_BASIC_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.79 |
smb2SetRenameInfoPctThe number of SMB2 SET_FILE_RENAME_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.80 |
smb2SetFileLinkInfoPctThe number of SMB2 SET_FILE_LINK_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.81 |
smb2SetFileDispInfoPctThe number of SMB2 SET_FILE_DISP_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.82 |
smb2SetFullEaInfoPctThe number of SMB2 SET_FULL_EA_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.83 |
smb2SetModeInfoPctThe number of SMB2 SET_MODE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.84 |
smb2SetAllocInfoPctThe number of SMB2 SET_ALLOC_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.85 |
smb2SetEofInfoPctThe number of SMB2 SET_EOF_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.86 |
smb2SetInfoUnsupportedPctThe number of SMB2 Unsupported SET_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.87 |
smb2SetInfoInvalidPctThe number of invalid SMB2 SET_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.88 |
smb2FsctlPipeTransceivePctThe number of SMB2 FSCTL_PIPE_TRANSCEIVE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.89 |
smb2FsctlPipePeekPctThe number of SMB2 FSCTL_PIPE_PEEK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.90 |
smb2FsctlEnumSnapshotsPctThe number of SMB2 FSCTL_ENUMERATE_SNAPSHOTS requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.91 |
smb2FsctlDfsReferralsPctThe number of SMB2 FSCTL_DFS_REFERRALS requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.92 |
smb2FsctlSetSparsePctThe number of SMB2 FSCTL_SET_SPARSE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.93 |
smb2FsctlSecureSharePctThe number of SMB2 FSCTL_SECURE_SHARE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.94 |
smb2FsctlFileUnsupportedPctThe number of Unsupported SMB2 File FSCTL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.95 |
smb2FsctlIpcUnsupportedPctThe number of Unsupported SMB2 IPC FSCTL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.96 |
smb2QueryDirPctThe number of SMB2 QUERY_DIR requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.3.97 |
cifsObsReqs OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.7.3.1.4 |
obsSmbClosePrintFilesThe number of SMB CLOSE_PRINT_FILE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.1 |
obsSmbCreatesThe number of SMB CREATE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.2 |
obsSmbCreateDirsThe number of SMB CREATE_DIRECTORY requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.3 |
obsSmbCreateNewsThe number of SMB CREATE_NEW requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.4 |
obsSmbLockAndReadsThe number of SMB LOCK_AND_READ requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.5 |
obsSmbLockByteRangesThe number of SMB LOCK_BYTE_RANGE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.6 |
obsSmbOpensThe number of SMB OPEN requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.7 |
obsSmbOpenAndXsThe number of SMB OPEN_ANDX requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.8 |
obsSmbProcessExitsThe number of SMB PROCESS_EXIT requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.9 |
obsSmbQueryInfosThe number of SMB QUERY_INFORMATION requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.10 |
obsSmbQueryInfo2sThe number of SMB QUERY_INFORMATION2 requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.11 |
obsSmbReadsThe number of SMB READ requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.12 |
obsSmbReadMPXsThe SMB READ_MPX request is not supported, so this value should always be zero.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.13 |
obsSmbReadRawsThe number of SMB READ_RAW requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.14 |
obsSmbSearchsThe number of SMB SEARCH requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.15 |
obsSmbSetInfosThe number of SMB SET_INFORMATION requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.16 |
obsSmbSetInfo2sThe number of SMB SET_INFORMATION2 requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.17 |
obsSmbQueryInfoDisksThe number of SMB QUERY_INFORMATION_DISK requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.18 |
obsSmbTrans2Open2sThe number of SMB TRANS2_OPEN2 requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.19 |
obsSmbTreeConnectsThe number of SMB TREE_CONNECT requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.20 |
obsSmbUnlockByteRangesThe number of SMB UNLOCK_BYTE_RANGE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.21 |
obsSmbWritesThe number of SMB WRITE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.22 |
obsSmbWriteAndUnlocksThe number of SMB WRITE_AND_UNLOCK requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.23 |
obsSmbWriteAndClosesThe number of SMB WRITE_AND_CLOSE requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.24 |
obsSmbWriteMPXsThe SMB WRITE_MPX request is not supported, so this value should always be zero.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.25 |
obsSmbWritePrintFilesThe SMB WRITE_PRINT_FILE request is not supported, so this value should always be zero.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.26 |
obsSmbWriteRawsThe number of SMB WRITE_RAW requests, since the last time the statistics were cleared.ro Counter32 .1.3.6.1.4.1.789.1.7.3.1.4.27 |
cifsObsPercent OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.7.3.1.5 |
obsSmbClosePrintFilePctThe number of SMB CLOSE_PRINT_FILE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.1 |
obsSmbCreatePctThe number of SMB CREATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.2 |
obsSmbCreateDirPctThe number of SMB CREATE_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.3 |
obsSmbCreateNewPctThe number of SMB CREATE_NEW requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.4 |
obsSmbLockAndReadPctThe number of SMB LOCK_AND_READ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.5 |
obsSmbLockByteRangePctThe number of SMB LOCK_BYTE_RANGE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.6 |
obsSmbOpenPctThe number of SMB OPEN requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.7 |
obsSmbOpenAndXPctThe number of SMB OPEN_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.8 |
obsSmbProcessExitPctThe number of SMB PROCESS_EXIT requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.9 |
obsSmbQueryInfoPctThe number of SMB QUERY_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.10 |
obsSmbQueryInfo2PctThe number of SMB QUERY_INFORMATION2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.11 |
obsSmbReadPctThe number of SMB READ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.12 |
obsSmbReadMPXPctThe number of SMB READ_MPX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.13 |
obsSmbReadRawPctThe number of SMB READ_RAW requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.14 |
obsSmbSearchPctThe number of SMB SEARCH requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.15 |
obsSmbSetInfoPctThe number of SMB SET_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.16 |
obsSmbSetInfo2PctThe number of SMB SET_INFORMATION2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.17 |
obsSmbQueryInfoDiskPctThe number of SMB QUERY_INFORMATION_DISK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.18 |
obsSmbTrans2Open2PctThe number of SMB TRANS2_OPEN2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.19 |
obsSmbTreeConnectPctThe number of SMB TREE_CONNECT requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.20 |
obsSmbUnlockByteRangePctThe number of SMB UNLOCK_BYTE_RANGE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.21 |
obsSmbWritePctThe number of SMB WRITE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.22 |
obsSmbWriteAndUnlockPctThe number of SMB WRITE_AND_UNLOCK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.23 |
obsSmbWriteAndClosePctThe number of SMB WRITE_AND_CLOSE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.24 |
obsSmbWriteMPXPctThe number of SMB WRITE_MPX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.25 |
obsSmbWritePrintFilePctThe number of SMB WRITE_PRINT_FILE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.26 |
obsSmbWriteRawPctThe number of SMB WRITE_RAW requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.ro Integer32 .1.3.6.1.4.1.789.1.7.3.1.5.27 |
cifsMisc OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.7.4 |
cifsCancelLocksUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.1 |
cifsWaitLocksUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.2 |
cifsCopyToAlignsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.3 |
cifsAlignedSmallsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.4 |
cifsAlignedLargesUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.5 |
cifsAlignedSmallRelsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.6 |
cifsAlignedLargeRelsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.7 |
cifsMbufWaitsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.8 |
cifsNbtWaitsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.9 |
cifsCwaWaitsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.10 |
cifsMultipleVCsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.11 |
cifsPDCUpcallsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.12 |
cifsQueuedWriteRawsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.13 |
cifsNBTDisconnectsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.14 |
cifsSMBDisconnectsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.15 |
cifsDupDisconnectsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.16 |
cifsOpLkBatchToL2sUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.17 |
cifsOpLkBatchToNonesUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.18 |
cifsOpLkL2ToNonesUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.19 |
cifsOpLkNoBreakAcksUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.20 |
cifsOpLkIgnoredAcksUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.21 |
cifsOpLkMultiWaitersUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.22 |
cifsSharingErrorRetriesUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.23 |
cifsOpLkWaiterTimedOutsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.24 |
cifsOpLkDelayedBreaksUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.25 |
cifsOpLkEarlyNFSsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.26 |
cifsOpLkNFSWaitedsUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.27 |
cifsMaxNFSBkWaiterCountUndocumentedro Integer32 .1.3.6.1.4.1.789.1.7.4.28 |
cifsClearTextPasswdThis indicates whether the cifs clients are using clear text passwords when authenticating with the filer. If cifsDomainJoined is false and this variable is also false, then the filer is using NT Security from a local user list.ro Enumeration .1.3.6.1.4.1.789.1.7.4.29 |
cifsSmb2MidUsedHashUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.30 |
cifsSmb2MidUnusedHashUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.31 |
cifsSmb2MidInvRejectUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.32 |
cifsSmb2DurableCreateReceivedUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.33 |
cifsSmb2DurableCreateSucceededUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.34 |
cifsSmb2DurableReclaimReceivedUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.35 |
cifsSmb2DurableReclaimSucceededUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.36 |
cifsSmb2DurableHandlePreservedUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.37 |
cifsSmb2DurableHandlePurgedUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.38 |
cifsSmb2DurableHandleExpiredUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.39 |
cifsSmb2FileDirInfoUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.40 |
cifsSmb2FileFullDirInfoUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.41 |
cifsSmb2FileIdFullDirInfoUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.42 |
cifsSmb2FileBothDirInfoUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.43 |
cifsSmb2FileIdBothDirInfoUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.44 |
cifsSmb2FileNamesInfoUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.45 |
cifsSmb2FileDirUnsupportedUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.46 |
cifsSmb2QueryInfoUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.47 |
cifsSmb2SetInfoUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.48 |
cifsSmb2IoctlUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.49 |
cifsSmb2RelatedCompRequestUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.50 |
cifsSmb2UnRelatedCompRequestUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.51 |
cifsSmb2FileRequestUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.52 |
cifsSmb2PipeRequestUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.53 |
cifsSmb2UnsupportedUndocumentedro Counter32 .1.3.6.1.4.1.789.1.7.4.54 |
cifsSmb2InvalidSignaturesNumber of CIFS SMB 2.0 messages received with incorrect signature.ro Counter32 .1.3.6.1.4.1.789.1.7.4.55 |
netcache OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8 |
ncOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.1 |
ncIsEnabledWhether Netcache is enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.1 |
ncIsLicensedWhether Netcache is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.2 |
ncDnsOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.1.3 |
ncDnsIsEnabledWhether the Domain Name System (DNS) is enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.3.1 |
ncHttpOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.1.4 |
ncHttpIsEnabledWhether HTTP is enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.4.1 |
ncNntpOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.1.5 |
ncNntpIsEnabledWhether NNTP is enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.5.1 |
ncNntpIsLicensedWhether NNTP is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.5.2 |
ncStreamingOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.1.6 |
ncStreamingMmsIsEnabledWhether Microsoft Media Services (MMS) is enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.6.1 |
ncStreamingMmsIsLicensedWhether Microsoft Windows Media Service (MMS) is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.6.2 |
ncStreamingMmsProIsLicensedWhether Microsoft Windows Media Service Pro (MMS) is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.6.3 |
ncStreamingRtspIsEnabledWhether the Real Time Streaming Protocol (RTSP) is enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.6.4 |
ncStreamingQuickTimeIsLicensedWhether QuickTime is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.6.5 |
ncStreamingRealIsLicensedWhether Real Media streaming is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.6.6 |
ncStreamingMmsUltraIsLicensedWhether Microsoft Windows Media Service Ultra (MMS) is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.6.7 |
ncStreamingRealProIsLicensedWhether Real Media Pro streaming is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.6.8 |
ncStreamingRealUltraIsLicensedWhether Real Media Ultra streaming is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.6.9 |
ncIcapOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.1.7 |
ncIcapIsEnabledWhether ICAP v0.95 is enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.7.1 |
ncIcapIsLicensedWhether ICAP is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.7.2 |
ncIcapv1IsEnabledWhether ICAP v1.0 is enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.7.3 |
ncGrmOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.1.8 |
ncGrmServerOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.1.8.1 |
ncGrmServerIsEnabledWhether the Global Request Manager (GRM) Server is enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.8.1.1 |
ncGrmServerIsLicensedWhether the Global Request Manager (GRM) Server is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.8.1.2 |
ncGrmAgentOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.1.8.2 |
ncGrmAgentIsEnabledWhether the Global Request Manager (GRM) Agent enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.8.2.1 |
ncGrmAgentIsLicensedWhether the Global Request Manager (GRM) Agent is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.8.2.2 |
ncCdOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.1.9 |
ncCdIsEnabledWhether Content Director is enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.9.1 |
ncHttpsProxyOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.1.10 |
ncHttpsProxyIsEnabledWhether HTTPS is enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.10.1 |
ncHttpsProxyIsLicensedWhether HTTPS is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.10.2 |
ncCmsOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.1.11 |
ncCmsIsEnabledWhether CMS is enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.8.1.11.1 |
ncInfo OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.2 |
ncVersionThe Netcache version string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.8.2.1 |
ncAdminPortNetcache Admin Port number - this is the first in the list of admin ports configured for the NetCache.ro Integer32 .1.3.6.1.4.1.789.1.8.2.2 |
accelmonitor OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.2.3 |
amNumberThe number of entries in the acceleration monitor table.ro Integer32 .1.3.6.1.4.1.789.1.8.2.3.1 |
amMonitorVariable for user defined SNMP traps to monitor whether there has been a status change of any of the acceleration servers that netcache is probing.ro Enumeration .1.3.6.1.4.1.789.1.8.2.3.2 |
amMonitorStringUsed in conjunction with amMonitor. This returns a string in format of: 'IP:port status' which reports the status of all the servers netcache is accelerating as of last status change.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.8.2.3.3 |
amTableA list of acceleration server and port entries. The number of entries is given by the value of amNumber. SEQUENCE OF AmEntry .1.3.6.1.4.1.789.1.8.2.3.4 |
amEntryAn acceleration monitor entry contains: the server IP address, server port and the status. AmEntry .1.3.6.1.4.1.789.1.8.2.3.4.1 |
amIndexA unique value for each entry in the acceleration monitor table.ro Integer32 .1.3.6.1.4.1.789.1.8.2.3.4.1.1 |
amAddressThe IP address of the acceleration server the NetCache is monitoring.ro IpAddress .1.3.6.1.4.1.789.1.8.2.3.4.1.2 |
amPortThe corresponding port on the server that NetCache is monitoring.ro Integer32 .1.3.6.1.4.1.789.1.8.2.3.4.1.3 |
amStatusThe status of the service running on the server. active - in queue but no probes done yet. up - the server is reachable and responding to probes. down - the server is unreachable. inactive - monitoring is disabled.ro Enumeration .1.3.6.1.4.1.789.1.8.2.3.4.1.4 |
ncLocalConfigChangedWhether the local configuration file on NetCache was changed without using DFM configuration management.ro Enumeration .1.3.6.1.4.1.789.1.8.2.4 |
ncLocalConfigVersionThe current cache configuration's version.ro Integer32 .1.3.6.1.4.1.789.1.8.2.5 |
grmMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.2.6 |
grmMonitorToggleVariable for user defined SNMP traps to monitor whether there has been a status change of any of the GRM agents reporting to this GRM server.ro Enumeration .1.3.6.1.4.1.789.1.8.2.6.1 |
grmMonitorStringUsed in conjunction with grmMonitor. This returns a string in format of: 'IP status.' which reports the status of all the GRM agents reporting to this GRM server as of last status change.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.8.2.6.2 |
takeoverinfo OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.2.7 |
takeoverAddrsIndicates the list of interfaces and their corresponding IP addresses of the partner NetCache that this appliance has taken over.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.8.2.7.1 |
takeoverModeIndicates the current takeover mode of this appliance.ro Enumeration .1.3.6.1.4.1.789.1.8.2.7.2 |
takeoverStatusIndicates the current status of the takeover partner of this appliance. up(1) indicates that the takeover partner is reachable. unknown(2) indicates that an unknown error occured. failed(3) indicates that the partner has failed, takeoverAddrs indicates the partner's IP address this appliance has taken over.ro Enumeration .1.3.6.1.4.1.789.1.8.2.7.3 |
ncStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.3 |
ncObjectsStoredThe total number of objects stored currently.ro Integer32 .1.3.6.1.4.1.789.1.8.3.1 |
ncBytesToClientsTotal bytes sent to clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.2 |
ncBytesFromClientsTotal bytes received from clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.3 |
ncBytesToServersTotal bytes sent to serversro Counter32 .1.3.6.1.4.1.789.1.8.3.4 |
ncBytesFromServersTotal bytes received from serversro Counter32 .1.3.6.1.4.1.789.1.8.3.5 |
ncHttp OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.3.6 |
ncHttpTotalRequestsTotal HTTP requests so farro Counter32 .1.3.6.1.4.1.789.1.8.3.6.1 |
ncHttpHitRequestsHTTP requests that resulted in hits so farro Counter32 .1.3.6.1.4.1.789.1.8.3.6.2 |
ncHttpMissRequestsHTTP requests that resulted in misses so farro Counter32 .1.3.6.1.4.1.789.1.8.3.6.3 |
ncHttpServConnsNumber of currently open TCP/IP connections to HTTP servers (active and idle)ro Integer32 .1.3.6.1.4.1.789.1.8.3.6.4 |
ncHttpCliConnsNumber of currently open TCP/IP connections to HTTP clients (active and idle)ro Integer32 .1.3.6.1.4.1.789.1.8.3.6.5 |
ncHttpBWSavingsBandwidth savings for HTTP requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.6.6 |
ncHttpObjHitrateObject Hitrate HTTP requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.6.7 |
ncHttpRespTimePerByteResponse time in milliseconds per byte for HTTP requests.ro Integer32 .1.3.6.1.4.1.789.1.8.3.6.8 |
ncHttpAvgRespTimeAverage response time in milliseconds for all HTTP requests.ro Integer32 .1.3.6.1.4.1.789.1.8.3.6.9 |
ncHttpAvgHitRespTimeAverage response time in milliseconds for HTTP hit requests.ro Integer32 .1.3.6.1.4.1.789.1.8.3.6.10 |
ncHttpAvgMissRespTimeAverage response time in milliseconds for HTTP miss requests.ro Integer32 .1.3.6.1.4.1.789.1.8.3.6.11 |
ncHttpInstAvgRespTimeAverage response time in milliseconds for all HTTP requests during the last 60 seconds.ro Integer32 .1.3.6.1.4.1.789.1.8.3.6.12 |
ncHttpInstAvgHitRespTimeAverage response time in milliseconds for HTTP hit requests during the last 60 seconds.ro Integer32 .1.3.6.1.4.1.789.1.8.3.6.13 |
ncHttpInstAvgMissRespTimeAverage response time in milliseconds for HTTP miss requests during the last 60 seconds.ro Integer32 .1.3.6.1.4.1.789.1.8.3.6.14 |
ncHttpTotalRespTimeTotal fetch time in milliseconds for HTTP requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.6.15 |
ncHttpTotalHitRespTimeTotal fetch time in milliseconds for HTTP HIT requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.6.16 |
ncHttpTotalMissRespTimeTotal fetch time in milliseconds for HTTP MISS requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.6.17 |
ncHttpBytesToClientsTotal HTTP bytes sent to clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.6.18 |
ncHttpBytesFromClientsTotal HTTP bytes received from clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.6.19 |
ncHttpBytesToServersTotal HTTP bytes sent to serversro Counter32 .1.3.6.1.4.1.789.1.8.3.6.20 |
ncHttpBytesFromServersTotal HTTP bytes received from serversro Counter32 .1.3.6.1.4.1.789.1.8.3.6.21 |
ncHttpHighTotalRespTimesTotal fetch time in milliseconds for HTTP requests. This object returns the most significant 32 bits of the 64 bit unsigned integer.ro Counter32 .1.3.6.1.4.1.789.1.8.3.6.22 |
ncHttpLowTotalRespTimesTotal fetch time in milliseconds for HTTP requests. This object returns the least significant 32 bits of the 64 bit unsigned integer.ro Counter32 .1.3.6.1.4.1.789.1.8.3.6.23 |
ncHttpHighTotalHitRespTimesTotal fetch time in milliseconds for HTTP HIT requests. This object returns the most significant 32 bits of the 64 bit unsigned integer.ro Counter32 .1.3.6.1.4.1.789.1.8.3.6.24 |
ncHttpLowTotalHitRespTimesTotal fetch time in milliseconds for HTTP HIT requests. This object returns the least significant 32 bits of the 64 bit unsigned integer.ro Counter32 .1.3.6.1.4.1.789.1.8.3.6.25 |
ncHttpHighTotalMissRespTimesTotal fetch time in milliseconds for HTTP MISS requests. This object returns the most significant 32 bits of the 64 bit unsigned integer.ro Counter32 .1.3.6.1.4.1.789.1.8.3.6.26 |
ncHttpLowTotalMissRespTimesTotal fetch time in milliseconds for HTTP MISS requests. This object returns the least significant 32 bits of the 64 bit unsigned integer.ro Counter32 .1.3.6.1.4.1.789.1.8.3.6.27 |
ncHttpReqRateRequest Rate for HTTP requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.6.28 |
ncHttpObjHitRateLast1MinHTTP object hit rate in the last 1 minute.ro Integer32 .1.3.6.1.4.1.789.1.8.3.6.29 |
ncHttpObjHitRateLast5MinHTTP object hit rate in the last 5 minutes.ro Integer32 .1.3.6.1.4.1.789.1.8.3.6.30 |
ncHttpByteHitRateLast1MinHTTP byte hit rate in the last 1 minute.ro Integer32 .1.3.6.1.4.1.789.1.8.3.6.31 |
ncHttpByteHitRateLast5MinHTTP byte hit rate in the last 5 minutes.ro Integer32 .1.3.6.1.4.1.789.1.8.3.6.32 |
ncHttpBWSavingsLast1MinBandwidth savings for HTTP requests in the last 1 minutero Integer32 .1.3.6.1.4.1.789.1.8.3.6.33 |
ncHttpBWSavingsLast5MinBandwidth savings for HTTP requests in the last 5 minutesro Integer32 .1.3.6.1.4.1.789.1.8.3.6.34 |
ncHttpActiveServConnsNumber of currently active TCP/IP connections to HTTP serversro Integer32 .1.3.6.1.4.1.789.1.8.3.6.35 |
ncHttpActiveCliConnsNumber of currently active TCP/IP connections to HTTP clientsro Integer32 .1.3.6.1.4.1.789.1.8.3.6.36 |
ncHttpAccelTableNumber of kilobytes sent to and recieved from the client side per acceleration rule SEQUENCE OF NcHttpAccelEntry .1.3.6.1.4.1.789.1.8.3.6.37 |
ncHttpAccelEntryEach entry contains the number of kilobytes sent and received to/from the clients side per acceleration rule NcHttpAccelEntry .1.3.6.1.4.1.789.1.8.3.6.37.1 |
ncHttpAccelIndexA unique value for each entry in the http acceleration stats tablero Integer32 .1.3.6.1.4.1.789.1.8.3.6.37.1.1 |
ncHttpAccelKbytesFromClientThe total number of kilobytes received from the client for this acceleration rulero Counter32 .1.3.6.1.4.1.789.1.8.3.6.37.1.2 |
ncHttpAccelKbytesToClientThe total number of kilobytes sent to the client for this acceleration rulero Counter32 .1.3.6.1.4.1.789.1.8.3.6.37.1.3 |
ncHttpAccelHitsThe number of times this acceleration rule has been hitro Counter32 .1.3.6.1.4.1.789.1.8.3.6.37.1.4 |
ncHttpsAccelTableNumber of kilobytes sent to and recieved from the client side per acceleration rule SEQUENCE OF NcHttpsAccelEntry .1.3.6.1.4.1.789.1.8.3.6.38 |
ncHttpsAccelEntryEach entry contains the number of kilobytes sent and received to/from the clients side per acceleration rule NcHttpsAccelEntry .1.3.6.1.4.1.789.1.8.3.6.38.1 |
ncHttpsAccelIndexA unique value for each entry in the http acceleration stats tablero Integer32 .1.3.6.1.4.1.789.1.8.3.6.38.1.1 |
ncHttpsAccelKbytesFromClientThe total number of kilobytes received from the client for this acceleration rulero Counter32 .1.3.6.1.4.1.789.1.8.3.6.38.1.2 |
ncHttpsAccelKbytesToClientThe total number of kilobytes sent to the client for this acceleration rulero Counter32 .1.3.6.1.4.1.789.1.8.3.6.38.1.3 |
ncHttpsAccelHitsThe number of times this acceleration rule has been hitro Counter32 .1.3.6.1.4.1.789.1.8.3.6.38.1.4 |
ncNntp OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.3.7 |
ncNntpTotalRequestsNNTP total requests so farro Counter32 .1.3.6.1.4.1.789.1.8.3.7.1 |
ncNntpCacheableRequestsNNTP requests that were cacheablero Counter32 .1.3.6.1.4.1.789.1.8.3.7.2 |
ncNntpProxyRequestsNNTP requests that were non-cacheablero Counter32 .1.3.6.1.4.1.789.1.8.3.7.3 |
ncNntpServConnsNumber of currently open TCP/IP connections to NNTP servers (active and idle)ro Integer32 .1.3.6.1.4.1.789.1.8.3.7.4 |
ncNntpCliConnsNumber of currently open TCP/IP connections to NNTP clients (active and idle)ro Integer32 .1.3.6.1.4.1.789.1.8.3.7.5 |
ncNntpBWSavingsBandwidth savings for NNTP requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.7.6 |
ncNntpRespTimePerByteResponse time per byte for NNTP requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.7.7 |
ncNntpBytesToClientsTotal NNTP bytes sent to clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.7.8 |
ncNntpBytesFromClientsTotal NNTP bytes received from clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.7.9 |
ncNntpBytesToServersTotal NNTP bytes sent to serversro Counter32 .1.3.6.1.4.1.789.1.8.3.7.10 |
ncNntpBytesFromServersTotal NNTP bytes received from serversro Counter32 .1.3.6.1.4.1.789.1.8.3.7.11 |
ncNntpObjHitrateObject Hitrate of NNTP requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.7.12 |
ncNntpActiveServConnsNumber of currently active TCP/IP connections to NNTP serversro Integer32 .1.3.6.1.4.1.789.1.8.3.7.13 |
ncNntpActiveCliConnsNumber of currently active TCP/IP connections to NNTP clientsro Integer32 .1.3.6.1.4.1.789.1.8.3.7.14 |
ncFtp OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.3.8 |
ncFtpTotalRequestsFTP total requests so farro Counter32 .1.3.6.1.4.1.789.1.8.3.8.1 |
ncFtpHitRequestsFTP requests that resulted in hits so farro Counter32 .1.3.6.1.4.1.789.1.8.3.8.2 |
ncFtpMissRequestsFTP requests that resulted in misses so farro Counter32 .1.3.6.1.4.1.789.1.8.3.8.3 |
ncFtpServConnsNumber of currently open TCP/IP connections to FTP servers (active and idle)ro Integer32 .1.3.6.1.4.1.789.1.8.3.8.4 |
ncFtpCliConnsNumber of currently open TCP/IP connections to FTP clients (active and idle)ro Integer32 .1.3.6.1.4.1.789.1.8.3.8.5 |
ncFtpBWSavingsBandwidth savings for FTP requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.8.6 |
ncFtpRespTimePerByteResponse time per byte for FTP requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.8.7 |
ncFtpBytesToClientsTotal FTP bytes sent to clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.8.8 |
ncFtpBytesFromClientsTotal FTP bytes received from clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.8.9 |
ncFtpBytesToServersTotal FTP bytes sent to serversro Counter32 .1.3.6.1.4.1.789.1.8.3.8.10 |
ncFtpBytesFromServersTotal FTP bytes received from serversro Counter32 .1.3.6.1.4.1.789.1.8.3.8.11 |
ncFtpObjHitrateObject Hitrate of FTP requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.8.12 |
ncFtpActiveServConnsNumber of currently active TCP/IP connections to FTP serversro Integer32 .1.3.6.1.4.1.789.1.8.3.8.13 |
ncFtpActiveCliConnsNumber of currently active TCP/IP connections to FTP clientsro Integer32 .1.3.6.1.4.1.789.1.8.3.8.14 |
ncStreaming OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.3.9 |
ncStreamingServConnsNumber of currently open TCP/IP connections to streaming servers (active and idle)ro Integer32 .1.3.6.1.4.1.789.1.8.3.9.1 |
ncStreamingCliConnsNumber of currently open TCP/IP connections to streaming clients (active and idle)ro Integer32 .1.3.6.1.4.1.789.1.8.3.9.2 |
ncStreamingBWSavingsBandwidth savings for all streaming requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.9.3 |
ncStreamingRespTimePerByteResponse time per byte for all streaming requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.9.4 |
ncStreamingHitRequestsSTREAMING requests that resulted in hits so farro Counter32 .1.3.6.1.4.1.789.1.8.3.9.5 |
ncStreamingMissRequestsSTREAMING requests that resulted in misses so farro Counter32 .1.3.6.1.4.1.789.1.8.3.9.6 |
ncStreamingTotalRequestsSTREAMING total requests so farro Counter32 .1.3.6.1.4.1.789.1.8.3.9.7 |
ncStreamingLiveBytesToClientsTotal Streaming Live bytes sent to clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.8 |
ncStreamingLiveBytesFromClientsTotal Streaming Live bytes received from clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.9 |
ncStreamingLiveBytesToServersTotal Streaming Live bytes sent to serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.10 |
ncStreamingLiveBytesFromServersTotal Streaming Live bytes received from serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.11 |
ncStreamingProxyBytesToClientsTotal Streaming Proxy bytes sent to clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.12 |
ncStreamingProxyBytesFromClientsTotal Streaming Proxy bytes received from clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.13 |
ncStreamingProxyBytesToServersTotal Streaming Proxy bytes sent to serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.14 |
ncStreamingProxyBytesFromServersTotal Streaming Proxy bytes received from serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.15 |
ncStreamingOBTClientsTotal Streaming Ondemand bytes sent to clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.16 |
ncStreamingOBFClientsTotal Streaming Ondemand bytes received from clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.17 |
ncStreamingOBTServersTotal Streaming Ondemand bytes sent to serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.18 |
ncStreamingOBFServersTotal Streaming Ondemand bytes received from serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.19 |
ncStreamingObjHitrateObject Hitrate of Streaming requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.9.20 |
ncStreamingRealBytesToClientsTotal Streaming Real bytes sent to clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.21 |
ncStreamingRealBytesFromClientsTotal Streaming Real bytes received from clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.22 |
ncStreamingRealBytesToServersTotal Streaming Real bytes sent to serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.23 |
ncStreamingRealBytesFromServersTotal Streaming Real bytes received from serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.24 |
ncStreamingMmsBytesToClientsTotal Streaming Mms bytes sent to clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.25 |
ncStreamingMmsBytesFromClientsTotal Streaming Mms bytes received from clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.26 |
ncStreamingMmsBytesToServersTotal Streaming Mms bytes sent to serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.27 |
ncStreamingMmsBytesFromServersTotal Streaming Mms bytes received from serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.28 |
ncStreamingQTBTClientsTotal Streaming QuickTime bytes sent to clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.29 |
ncStreamingQTBFClientsTotal Streaming QuickTime bytes received from clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.30 |
ncStreamingQTBTServersTotal Streaming QuickTime bytes sent to serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.31 |
ncStreamingQTBFServersTotal Streaming QuickTime bytes received from serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.32 |
ncStreamingLiveBWSavingsBandwidth savings for all Live streaming requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.9.33 |
ncStreamingOndemandBWSavingsBandwidth savings for all VOD streaming requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.9.34 |
ncStreamingRealBWSavingsBandwidth savings for all Real streaming requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.9.35 |
ncStreamingMmsBWSavingsBandwidth savings for all MMS streaming requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.9.36 |
ncStreamingQuickTimeBWSavingsBandwidth savings for all QuickTime streaming requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.9.37 |
ncStreamingActiveServConnsNumber of currently active TCP/IP connections to streaming serversro Integer32 .1.3.6.1.4.1.789.1.8.3.9.38 |
ncStreamingActiveCliConnsNumber of currently active TCP/IP connections to streaming clientsro Integer32 .1.3.6.1.4.1.789.1.8.3.9.39 |
ncStreamingRtspWMBytesToClientsTotal Streaming Windows Media RTSP bytes sent to clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.40 |
ncStreamingRtspWMBFClientsTotal Streaming Windows Media RTSP bytes received from clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.9.41 |
ncStreamingRtspWMBytesToServersTotal Streaming Windows Media RTSP bytes sent to serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.42 |
ncStreamingRtspWMBFServersTotal Streaming Windows Media RTSP bytes received from serversro Counter32 .1.3.6.1.4.1.789.1.8.3.9.43 |
ncStreamingRtspWMBWSavingsBandwidth savings for all Windows Media RTSP streaming requestsro Integer32 .1.3.6.1.4.1.789.1.8.3.9.44 |
ncStreamingAccelTableNumber of kilobytes sent to and recieved from the client side per acceleration rule SEQUENCE OF NcStreamingAccelEntry .1.3.6.1.4.1.789.1.8.3.9.45 |
ncStreamingAccelEntryEach entry contains the number of kilobytes sent and received to/from the clients side per acceleration rule NcStreamingAccelEntry .1.3.6.1.4.1.789.1.8.3.9.45.1 |
ncStreamingAccelIndexA unique value for each entry in the streaming acceleration stats tablero Integer32 .1.3.6.1.4.1.789.1.8.3.9.45.1.1 |
ncStreamingAccelKbytesFromClientThe total number of kilobytes received from the client for this acceleration rulero Counter32 .1.3.6.1.4.1.789.1.8.3.9.45.1.2 |
ncStreamingAccelKbytesToClientThe total number of kilobytes sent to the client for this acceleration rulero Counter32 .1.3.6.1.4.1.789.1.8.3.9.45.1.3 |
ncStreamingAccelHitsThe number of times this acceleration rule has been hitro Counter32 .1.3.6.1.4.1.789.1.8.3.9.45.1.4 |
ncStreamingClientsDelayedSWNumber of clients delayed because of a Bandwidth Limitro Counter32 .1.3.6.1.4.1.789.1.8.3.9.46 |
ncTotalBWSavingsTotal Bandwidth savings for HTTP, FTP, NNTP, and Streaming protocolsro Integer32 .1.3.6.1.4.1.789.1.8.3.10 |
ncDns OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.3.11 |
ncDnsRequestsReceivedTotal DNS requests received from clientsro Counter32 .1.3.6.1.4.1.789.1.8.3.11.1 |
ncDnsCacheHitsHits on the DNS cache. This includes hits for DNS lookups generated by NetCache internallyro Counter32 .1.3.6.1.4.1.789.1.8.3.11.2 |
ncDnsCacheMissesMisses on the DNS cache. This includes misses for DNS lookups generated by NetCache internallyro Counter32 .1.3.6.1.4.1.789.1.8.3.11.3 |
ncDnsSuccessfulForwardLookupsForward DNS lookups that are successfulro Counter32 .1.3.6.1.4.1.789.1.8.3.11.4 |
ncDnsFailedForwardLookupsForward DNS lookups that failedro Counter32 .1.3.6.1.4.1.789.1.8.3.11.5 |
ncDnsPendingForwardLookupsForward DNS lookups that are in progressro Integer32 .1.3.6.1.4.1.789.1.8.3.11.6 |
ncDnsSuccessfulReverseLookupsReverse DNS lookups that are successfulro Counter32 .1.3.6.1.4.1.789.1.8.3.11.7 |
ncDnsFailedReverseLookupsReverse DNS lookups that failedro Counter32 .1.3.6.1.4.1.789.1.8.3.11.8 |
ncDnsPendingReverseLookupsReverse DNS lookups that are in progressro Integer32 .1.3.6.1.4.1.789.1.8.3.11.9 |
ncDnsIres OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.3.11.10 |
ncDnsIresIsEnabledHas Full Service Resolver been enabledro Enumeration .1.3.6.1.4.1.789.1.8.3.11.10.1 |
ncDnsIresIsInitialisedHas Full Service Resolver initalisedro Enumeration .1.3.6.1.4.1.789.1.8.3.11.10.2 |
ncDnsIresForwardLookupsFull Service Resolver's Forward Lookupsro Counter32 .1.3.6.1.4.1.789.1.8.3.11.10.3 |
ncDnsIresPendingForwardLookupsFull Service Resolver's Pending Forward Lookupsro Counter32 .1.3.6.1.4.1.789.1.8.3.11.10.4 |
ncDnsIresReverseLookupsFull Service Resolver's Reverse Lookupsro Counter32 .1.3.6.1.4.1.789.1.8.3.11.10.5 |
ncDnsIresPendingReverseLookupsFull Service Resolver's Pending Reverse Lookupsro Counter32 .1.3.6.1.4.1.789.1.8.3.11.10.6 |
ncAuth OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.3.12 |
ncNtlm OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.3.12.1 |
ncNtlmPossibleProblemWhether a possible ntlm problem is detected in the appliance's domain environment.ro Enumeration .1.3.6.1.4.1.789.1.8.3.12.1.1 |
ncRM OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.3.13 |
ncRMMem OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.8.3.13.1 |
ncRMMemTotalTotal memory in kilobytes available for allocations after boot. It does not imply the total system memory.ro Integer32 .1.3.6.1.4.1.789.1.8.3.13.1.1 |
ncRMMemFreeCurrent free memory in kilobytes available for allocations.ro Integer32 .1.3.6.1.4.1.789.1.8.3.13.1.2 |
snapmirror OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.9 |
snapmirrorOnIndicates whether snapmirror has been turned on or not.ro Enumeration .1.3.6.1.4.1.789.1.9.1 |
snapmirrorActiveRestoreCountNumber of active SnapMirror restores.ro Integer32 .1.3.6.1.4.1.789.1.9.2 |
snapmirrorScheduledRestoreCountNumber of scheduled SnapMirror restores.ro Integer32 .1.3.6.1.4.1.789.1.9.3 |
snapmirrorBackupNumberNumber of active SnapMirror backups.ro Integer32 .1.3.6.1.4.1.789.1.9.4 |
snapmirrorBackupSuccessesNumber of SnapMirror backups which completed. Reset on reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.5 |
snapmirrorRestoreSuccessesNumber of SnapMirror restores which completed. Reset on reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.6 |
snapmirrorBackupAbortsNumber of SnapMirror backup transfers which have aborted. Reset on reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.7 |
snapmirrorRestoreRestartAbortsNumber of SnapMirror restore temporary aborts. Reset on reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.8 |
snapmirrorRestoreWaitAbortsNumber of SnapMirror restore permanent aborts. Reset on reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.9 |
snapmirrorWrittenBytesNumber of Megabytes written by SnapMirror. Reset on reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.10 |
snapmirrorReadBytesNumber of Megabytes read by SnapMirror. Reset on reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.11 |
snapmirrorActiveDstNumberNumber of active SnapMirror destination.ro Integer32 .1.3.6.1.4.1.789.1.9.12 |
snapmirrorActiveSrcNumberNumber of active SnapMirror Source.ro Integer32 .1.3.6.1.4.1.789.1.9.13 |
snapmirrorFilerTotalDstSuccessesTotal number of successful snapmirror transfers to the destination. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.14 |
snapmirrorFilerTotalSrcSuccessesTotal number of successful snapmirror transfers from the source. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.15 |
snapmirrorFilerTotalSrcFailuresTotal number of failed SnapMirror transfers on the source. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.16 |
snapmirrorFilerTotalDstFailuresTotal number of failed SnapMirror transfers on the destination. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.17 |
snapmirrorFilerTotalDstDefermentsTotal number of deferred snapmirror transfer on the destination. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.18 |
snapmirrorIsLicensedWhether the snapmirror is licensed on the filer.ro Enumeration .1.3.6.1.4.1.789.1.9.19 |
snapmirrorStatusTableprovide a list of snapmirror status. SEQUENCE OF SnapmirrorStatusEntry .1.3.6.1.4.1.789.1.9.20 |
snapmirrorStatusEntryProvide a report of current status of snapmirror. SnapmirrorStatusEntry .1.3.6.1.4.1.789.1.9.20.1 |
snapmirrorIndexIndex into the snapmirror status table.ro Integer32 .1.3.6.1.4.1.789.1.9.20.1.1 |
snapmirrorSrcSource of the snapmirror. <filer>:<vol> or <filer>:/vol/<qtree_name>ro OCTET STRING .1.3.6.1.4.1.789.1.9.20.1.2 |
snapmirrorDstDestination of the snapmirror. <filer>:<vol> or <filer>:/vol/<qtree_name>ro OCTET STRING .1.3.6.1.4.1.789.1.9.20.1.3 |
snapmirrorStatusCurrent transfer status of the snapmirror.ro Enumeration .1.3.6.1.4.1.789.1.9.20.1.4 |
snapmirrorStateCurrent state of the snapmirror.ro Enumeration .1.3.6.1.4.1.789.1.9.20.1.5 |
snapmirrorLagHow far behind from the source the destination is.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.789.1.9.20.1.6 |
snapmirrorTotalSuccessesTotal number of successful transfer since the snapmirror is initialized. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.20.1.7 |
snapmirrorTotalRestartSuccessesTotal number of successful restarted transfer since the snapmirror is initialized. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.20.1.8 |
snapmirrorTotalFailuresTotal number of failed or aborted transfer since the snapmirror is initialized. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.20.1.9 |
snapmirrorTotalDefermentsTotal number of deferment since the snapmirror is initialized. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.20.1.10 |
snapmirrorTotalTransMBsTotal transfer size in MB for the snapmirror. Reset on reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.20.1.11 |
snapmirrorTotalTransTimeSecondsTotal number of seconds spent in successful transfer for the snapmirror. Reset on reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.20.1.12 |
snapmirrorThrottleValueCurrent throttle value for the snapmirror.ro Integer32 .1.3.6.1.4.1.789.1.9.20.1.13 |
snapmirrorMirrorTimestampTimestamp of the last snapshot successfully transferred from the source to the destination.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.9.20.1.14 |
snapmirrorBaseSnapshotThe name of the current base snapshot for the snapmirror.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.9.20.1.15 |
snapmirrorLastTransTypeThe type of the previous successful transfer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.9.20.1.16 |
snapmirrorLastTransMBsLast successful transfer size in MB for the snapmirror.ro Counter32 .1.3.6.1.4.1.789.1.9.20.1.17 |
snapmirrorLastTransTimeSecondsDuration of last successful transfer in seconds for the snapmirror.ro Counter32 .1.3.6.1.4.1.789.1.9.20.1.18 |
snapmirrorScheduleUpdate schedule for the snapmirror in conf file format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.9.20.1.19 |
snapmirrorScheduleDescDescription of the update schedule for the snapmirror.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.9.20.1.20 |
snapmirrorArgumentsArguments for the snapmirror in conf file format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.9.20.1.21 |
snapmirrorSyncToAsyncThe number of times changing from sync mode to async mode since the snapmirror is initialized. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.9.20.1.22 |
snapmirrorConnTableProvide a list of snapmirror connection definitions. SEQUENCE OF SnapmirrorConnEntry .1.3.6.1.4.1.789.1.9.21 |
snapmirrorConnEntryProvide a report of a defined multipath connection. SnapmirrorConnEntry .1.3.6.1.4.1.789.1.9.21.1 |
snapmirrorConnIndexIndex into the snapmirror multipath connection table.ro Integer32 .1.3.6.1.4.1.789.1.9.21.1.1 |
snapmirrorConnNameThe name of the snapmirror multipath connection.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.9.21.1.2 |
snapmirrorConnTypeThe type of the snapmirror multipath connection.ro Enumeration .1.3.6.1.4.1.789.1.9.21.1.3 |
snapmirrorConnSrc1The name of the source for the first path.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.9.21.1.4 |
snapmirrorConnDst1The name of the destination for the first path.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.9.21.1.5 |
snapmirrorConnSrc2The name of the source for the second path.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.9.21.1.6 |
snapmirrorConnDst2The name of the destination for the second path.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.9.21.1.7 |
ndmp OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.10 |
ndmpOnIndicates whether ndmpd has been turned on or not.ro Enumeration .1.3.6.1.4.1.789.1.10.1 |
ndmpSessionOpenedTotal number of ndmpd sessions currently opened. Sessions may be running backups, restores or neither.ro Integer32 .1.3.6.1.4.1.789.1.10.2 |
ndmpBackupActiveNumber of ndmpd backups currently active.ro Integer32 .1.3.6.1.4.1.789.1.10.3 |
ndmpRestoreActiveNumber of ndmpd restores currently active.ro Integer32 .1.3.6.1.4.1.789.1.10.4 |
ndmpTapeActiveNumber of tape drives currently active.ro Integer32 .1.3.6.1.4.1.789.1.10.5 |
ndmpBackupSuccessesNumber of ndmpd backups that succeeded.ro Counter32 .1.3.6.1.4.1.789.1.10.6 |
ndmpRestoreSuccessesNumber of ndmpd restores that succeeded.ro Counter32 .1.3.6.1.4.1.789.1.10.7 |
ndmpBackupFailuresNumber of ndmpd backups that failed.ro Counter32 .1.3.6.1.4.1.789.1.10.8 |
ndmpRestoreFailuresNumber of ndmpd restores that failed.ro Counter32 .1.3.6.1.4.1.789.1.10.9 |
ndmpBackupFailureReasonWhen the ndmpBackupFailures value is non-zero, this string describes the reason for the most recent backup failure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.10.10 |
ndmpRestoreFailureReasonWhen the ndmpRestoreFailures value is non-zero, this string describes the reason for the most recent restore failure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.10.11 |
fabric OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.11 |
fabricInstancesThe number of distinct fabrics present.ro Integer32 .1.3.6.1.4.1.789.1.11.1 |
fabricTableProvide a list of fabrics. SEQUENCE OF FabricEntry .1.3.6.1.4.1.789.1.11.2 |
fabricEntryProvide a report of current configuration and status of fabrics. FabricEntry .1.3.6.1.4.1.789.1.11.2.1 |
fabricIndexA number that identifies this fabric entry.ro Integer32 .1.3.6.1.4.1.789.1.11.2.1.1 |
fabricStatusThis indicates the overall status of the SAN fabric(s).ro Enumeration .1.3.6.1.4.1.789.1.11.2.1.2 |
fabricStatusMessageA string describing the fabric status, including a description of the condition (if any) that caused the status to be anything other than ok(3).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.11.2.1.3 |
fabricNameThis is the WWN of the fabric.ro OCTET STRING .1.3.6.1.4.1.789.1.11.2.1.4 |
fabricOwnerThis indicates who owns the management of the fabric.ro Enumeration .1.3.6.1.4.1.789.1.11.2.1.5 |
switchTableProvide a list of switches and hubs connected to the fabric. SEQUENCE OF SwitchEntry .1.3.6.1.4.1.789.1.11.3 |
switchEntryProvide a report of current configuration and status of fabric interconnect elements. This include switches and hubs. SwitchEntry .1.3.6.1.4.1.789.1.11.3.1 |
switchIndexA number that identifies this switch entry.ro Integer32 .1.3.6.1.4.1.789.1.11.3.1.1 |
switchNameThis is the WWN of the switch.ro OCTET STRING .1.3.6.1.4.1.789.1.11.3.1.2 |
switchSymbolicNameThis is the symbolic name of the switch.ro OCTET STRING .1.3.6.1.4.1.789.1.11.3.1.3 |
switchTypeThe type of the switch.ro Enumeration .1.3.6.1.4.1.789.1.11.3.1.4 |
switchDomainThe domain identifier of the switch.ro Integer32 .1.3.6.1.4.1.789.1.11.3.1.5 |
switchManagementIdThe in-band management identifier of the switch.ro Integer32 .1.3.6.1.4.1.789.1.11.3.1.6 |
switchStatusThe current status of the switch.ro Enumeration .1.3.6.1.4.1.789.1.11.3.1.7 |
switchStatusMessageA string describing the switch status, including a description of the condition (if any) that caused the status to be anything other than ok(3).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.11.3.1.8 |
switchLinkSpeedThe link speed of the switch. The value is an integer whose units are Gbits (for example, a value of 2 represents a link speed of 2 Gbit).ro Integer32 .1.3.6.1.4.1.789.1.11.3.1.9 |
switchHighPacketsProcessedNumber of Packets successfully processed since the last reboot/reset of the switch. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use switch64PacketsProcessed instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.11.3.1.10 |
switchLowPacketsProcessedNumber of Packets successfully processed since the last reboot/reset of the switch. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use switch64PacketsProcessed instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.11.3.1.11 |
switchHighPacketsRejectedNumber of Packets rejected since the last reboot/reset of the switch. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use switch64PacketsRejected instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.11.3.1.12 |
switchLowPacketsRejectedNumber of Packets rejected since the last reboot/reset of the switch. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use switch64PacketsRejected instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.11.3.1.13 |
switchFabricIndexThe index of the fabric on which this switch resides. The value ranges from 1 to the value of fabricInstances.ro Integer32 .1.3.6.1.4.1.789.1.11.3.1.14 |
switch64PacketsProcessedNumber of Packets successfully processed since the last reboot/reset of the switch. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.11.3.1.15 |
switch64PacketsRejectedNumber of Packets rejected since the last reboot/reset of the switch. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.11.3.1.16 |
portTableProvide a list of ports connected to the fabric. SEQUENCE OF PortEntry .1.3.6.1.4.1.789.1.11.4 |
portEntryProvide a report of current configuration and status of ports in the fabric. PortEntry .1.3.6.1.4.1.789.1.11.4.1 |
portIndexA number that identifies this port entry.ro Integer32 .1.3.6.1.4.1.789.1.11.4.1.1 |
portNameThis is the WWN of the port.ro OCTET STRING .1.3.6.1.4.1.789.1.11.4.1.2 |
portSwitchIndexThe index of the switch on which this port resides. The value ranges from 1 to the number of of switches.ro Integer32 .1.3.6.1.4.1.789.1.11.4.1.3 |
portSwitchNameThis is the WWN of the switch to which the port is attached.ro OCTET STRING .1.3.6.1.4.1.789.1.11.4.1.4 |
portNumberThe port number on the switch.ro Integer32 .1.3.6.1.4.1.789.1.11.4.1.5 |
portTypeThe type of the port.ro Enumeration .1.3.6.1.4.1.789.1.11.4.1.6 |
portStateThe current state of the port.ro Enumeration .1.3.6.1.4.1.789.1.11.4.1.7 |
portFabricIndexThe index of the fabric on which this port resides. The value ranges from 1 to the value of fabricInstances.ro Integer32 .1.3.6.1.4.1.789.1.11.4.1.8 |
dafs OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.12 |
dafsOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.12.1 |
dafsIsLicensedWhether the dafs protocol is licensed on the filer. Data ONTAP Specificroobsolete Enumeration .1.3.6.1.4.1.789.1.12.1.1 |
dafsMaxRequestsServerServer wide maximum number of concurrent requests Data ONTAP Specificroobsolete Integer32 .1.3.6.1.4.1.789.1.12.1.2 |
dafsMaxRequestsServer maximum number of concurrent requests per session Data ONTAP Specificroobsolete Integer32 .1.3.6.1.4.1.789.1.12.1.3 |
dafsMaxRequestSizeServer maximum size of an inline requestro Integer32 .1.3.6.1.4.1.789.1.12.1.4 |
dafsMaxResponseSizeServer maximum size of an inline responsero Integer32 .1.3.6.1.4.1.789.1.12.1.5 |
dafsMaxPendingRequestsServerServer wide maximum number of requests that can queue waiting for resources Data ONTAP Specificroobsolete Integer32 .1.3.6.1.4.1.789.1.12.1.6 |
dafsUseChecksumsServer uses checksumsro Enumeration .1.3.6.1.4.1.789.1.12.1.7 |
dafsNicNumRequestDemonsServer default number of request demons per Nic. Data ONTAP Specificroobsolete Integer32 .1.3.6.1.4.1.789.1.12.1.8 |
dafsAnonymousAuthenticationAllow the server to acception connections with authentication type NONE.ro Enumeration .1.3.6.1.4.1.789.1.12.1.9 |
dafsServerEnabledCurrent status of the DAFS server. If true, the DAFS server is running.ro Enumeration .1.3.6.1.4.1.789.1.12.1.10 |
dafsDefaultUidDefault client User ID if anonymously connected.ro Integer32 .1.3.6.1.4.1.789.1.12.1.11 |
dafsDefaultGidDefault client Group ID if anonymously connected.ro Integer32 .1.3.6.1.4.1.789.1.12.1.12 |
dafsMaxDisconnectedSessionsMaximum number of disconnected sessions for which the DAFS server will retain response cache data.ro Integer32 .1.3.6.1.4.1.789.1.12.1.13 |
dafsMaxIdleSecondsMaximum number of seconds server will keep a session open without hearing from the client.ro Integer32 .1.3.6.1.4.1.789.1.12.1.14 |
dafsNicTableA table containing DAFS NIC specific information. SEQUENCE OF DafsNicEntry .1.3.6.1.4.1.789.1.12.2 |
dafsNicEntryInformation about a particular current DAFS nic. An object of this type is transient, in that it ceases to exist when (or soon after) the nic is detached. DafsNicEntry .1.3.6.1.4.1.789.1.12.2.1 |
dafsNicIndexA unique value for each interface. Its value ranges between 1 and the value of DafsNicNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.ro Integer32 .1.3.6.1.4.1.789.1.12.2.1.1 |
dafsNicNameA textual string containing the logical name under which the nic has been attached.ro DisplayString .1.3.6.1.4.1.789.1.12.2.1.2 |
dafsNicDeviceA textual string containing the physical name of the nic that has been attached.ro DisplayString .1.3.6.1.4.1.789.1.12.2.1.3 |
dafsNicStateCurrent state of DAFS nicro Enumeration .1.3.6.1.4.1.789.1.12.2.1.4 |
dafsNicListenAddrTransport specific address structure giving the DAFS listen address for this NIC.ro OCTET STRING .1.3.6.1.4.1.789.1.12.2.1.5 |
dafsNicNumRqstDemonsNumber of request demons assigned to this Nic to handle Nic related events. Data ONTAP Specificroobsolete Integer32 .1.3.6.1.4.1.789.1.12.2.1.6 |
dafsNicInBytesTotal number of bytes, include DMA, received on this interfacero Counter32 .1.3.6.1.4.1.789.1.12.2.1.7 |
dafsNicDirectInBytesTotal number of bytes read directly from the peer memory through this interfacero Counter32 .1.3.6.1.4.1.789.1.12.2.1.8 |
dafsNicOutBytesTotal number of bytes, include DMA, sent on this interfacero Counter32 .1.3.6.1.4.1.789.1.12.2.1.9 |
dafsNicDirectOutBytesTotal number of bytes written directly to the peer memory through this interfacero Counter32 .1.3.6.1.4.1.789.1.12.2.1.10 |
curDafs OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.12.3 |
dafsPendingRequestsServer wide current number of requests that are queued waiting for resources Data ONTAP Specificroobsolete Integer32 .1.3.6.1.4.1.789.1.12.3.1 |
dafsCurrentRequestsServer wide current number of active requests Data ONTAP Specificroobsolete Integer32 .1.3.6.1.4.1.789.1.12.3.2 |
totDafs OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.12.4 |
dafsCallsTotal number of DAFS calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.1 |
dafsClientAuthsTotal number of Client Auth calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.2 |
dafsClientConnectsTotal number of Client Connect calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.3 |
dafsClientConnectAuthsTotal number of Client Connect Auth calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.4 |
dafsConnectBindsTotal number of Connect Bind calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.5 |
dafsDisconnectsTotal number of Disconnect calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.6 |
dafsRegisterCredsTotal number of Register Credential calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.7 |
dafsReleaseCredsTotal number of Release Credential calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.8 |
dafsSecinfosTotal number of Secinfo calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.9 |
dafsServerAuthsTotal number of Server Auth calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.10 |
dafsCheckResponsesTotal number of Check Response calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.11 |
dafsFetchResponsesTotal number of Fetch Response calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.12 |
dafsDiscardResponsesTotal number of Discard Responses calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.13 |
dafsAccessesTotal number of Access calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.14 |
dafsCacheHintsTotal number of Cache Hint calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.15 |
dafsClosesTotal number of Close calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.16 |
dafsCommitsTotal number of Commit calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.17 |
dafsCreatesTotal number of Create calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.18 |
dafsDelegPurgesTotal number of Delegate Purge calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.19 |
dafsDelegReturnsTotal number of Delegate Return calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.20 |
dafsGetFsattrsTotal number of Get Fsattr calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.21 |
dafsGetRootHandlesTotal number of Get Root Handle calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.22 |
dafsGetattrInlinesTotal number of Getattr Inline calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.23 |
dafsGetattrDirectsTotal number of Getattr Direct calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.24 |
dafsLinksTotal number of Link calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.25 |
dafsLocksTotal number of Lock calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.26 |
dafsLocktsTotal number of LockT calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.27 |
dafsLockusTotal number of LockU calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.28 |
dafsLookUpsTotal number of LookUp calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.29 |
dafsLookUppsTotal number of LookUpp calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.30 |
dafsNullsTotal number of Null calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.31 |
dafsNverifysTotal number of Nverify calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.32 |
dafsOpensTotal number of Open calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.33 |
dafsOpenDowngradesTotal number of Open Downgrade calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.34 |
dafsOpenattrsTotal number of Openattr calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.35 |
dafsReadInlinesTotal number of Read Inline calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.36 |
dafsReadDirectsTotal number of Read Direct calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.37 |
dafsReaddirInlinesTotal number of Readdir Inline calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.38 |
dafsReaddirDirectsTotal number of Readdir Direct calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.39 |
dafsReadlinkInlinesTotal number of Readlink Inline calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.40 |
dafsReadlinkDirectsTotal number of Readlink Direct calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.41 |
dafsRemovesTotal number of Remove calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.42 |
dafsRenamesTotal number of Rename calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.43 |
dafsSetattrInlinesTotal number of Setattr Inline calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.44 |
dafsSetattrDirectsTotal number of Setattr Direct calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.45 |
dafsVerifysTotal number of Verify calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.46 |
dafsBatchSubmitsTotal number of Batch Submit calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.47 |
dafsWriteInlinesTotal number of Write Inline calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.48 |
dafsWriteDirectsTotal number of Write Direct calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.49 |
dafsBcGetattrsTotal number of BC Getattr calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.50 |
dafsBcNullsTotal number of BC Null calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.51 |
dafsBcRecallsTotal number of BC Recall calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.52 |
dafsBcBatchCompletionsTotal number of BC Batch Completion calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.53 |
dafsAppendInlinesTotal number of Append Inline calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.54 |
dafsAppendDirectsTotal number of Append Direct calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.55 |
dafsGetFencingListsTotal number of Get Fencing List calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.56 |
dafsSetFencingListsTotal number of Set Fencing List calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.57 |
dafsHurryUpsTotal number of Hurry Up calls since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.58 |
dafsInBytesTotal number of bytes, including DMA, received since the last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.59 |
dafsDirectInBytesTotal number of bytes received directly into memory since last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.60 |
dafsOutBytesTotal number of bytes, including DMA, sent since the last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.61 |
dafsDirectOutBytesTotal number of bytes sent directly into remote memory since the last rebootro Counter32 .1.3.6.1.4.1.789.1.12.4.62 |
dafsSessionTableA table containing current DAFS client session information. SEQUENCE OF DafsSessionEntry .1.3.6.1.4.1.789.1.12.5 |
dafsSessionEntryInformation about a particular DAFS session. An object of this type is transient, in that it ceases to exist when (or soon after) the client disconnects. DafsSessionEntry .1.3.6.1.4.1.789.1.12.5.1 |
dafsSessionIndexA unique value for each session.ro Integer32 .1.3.6.1.4.1.789.1.12.5.1.1 |
dafsSessionIdSession Identifier assigned by the server.ro OCTET STRING .1.3.6.1.4.1.789.1.12.5.1.2 |
dafsSessionEndianByte order used on this session.ro Enumeration .1.3.6.1.4.1.789.1.12.5.1.3 |
dafsSessionAllowBackChannelSession may use a back control channel.ro Enumeration .1.3.6.1.4.1.789.1.12.5.1.4 |
dafsSessionAllowRdmaReadChannelSession may use a RDMA read channel.ro Enumeration .1.3.6.1.4.1.789.1.12.5.1.5 |
dafsSessionUseChecksumsSession uses checksums.ro Enumeration .1.3.6.1.4.1.789.1.12.5.1.6 |
dafsSessionMaxCredentialsMaximum number of credientials that can be registered on this session.ro Integer32 .1.3.6.1.4.1.789.1.12.5.1.7 |
dafsSessionMaxRequestSizeMaximum size of a DAFS request.ro Integer32 .1.3.6.1.4.1.789.1.12.5.1.8 |
dafsSessionMaxResponseSizeMaximum size of a DAFS response.ro Integer32 .1.3.6.1.4.1.789.1.12.5.1.9 |
dafsSessionMaxRequestsMaximum number of concurrent requests.ro Integer32 .1.3.6.1.4.1.789.1.12.5.1.10 |
dafsSessionInlineWriteHeaderSizeSize of DAFS headers plus padding to the start of data. Used to better align inline data.ro Integer32 .1.3.6.1.4.1.789.1.12.5.1.11 |
dafsSessionClientIdStringClient ID string supplied by the client. Intended to uniquely identify that client.ro OCTET STRING .1.3.6.1.4.1.789.1.12.5.1.12 |
dafsSessionClientVerifierSupplied by the client to uniquely identify an instnce of a client.ro OCTET STRING .1.3.6.1.4.1.789.1.12.5.1.13 |
dafsSessionNumCredentialsCurrent number of credentials registered on this sessionro Integer32 .1.3.6.1.4.1.789.1.12.5.1.14 |
dafsSessionNumRequestsCurrent number of active requests on this sessionro Integer32 .1.3.6.1.4.1.789.1.12.5.1.15 |
dafsExportTableA table containing DAFS Export filesystems. SEQUENCE OF DafsExportEntry .1.3.6.1.4.1.789.1.12.6 |
dafsExportEntryInformation about a particular current DAFS export. An object of this type is transient, in that it ceases to exist when (or soon after) the export is deleted. DafsExportEntry .1.3.6.1.4.1.789.1.12.6.1 |
dafsExportIndexA unique value for each export. Its value ranges between 1 and the number of exports. The value for each export must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.ro Integer32 .1.3.6.1.4.1.789.1.12.6.1.1 |
dafsExportNameA textual string containing information about the export. This is the logical export name.ro DisplayString .1.3.6.1.4.1.789.1.12.6.1.2 |
dafsExportPathA textual string containing information about the export. This is the local filesystem path to the export.ro DisplayString .1.3.6.1.4.1.789.1.12.6.1.3 |
dafsExportEnabledThis export is available for access.ro Enumeration .1.3.6.1.4.1.789.1.12.6.1.4 |
dafsExportRwModeGlobal export mode. This represents the maximum access rights.ro Enumeration .1.3.6.1.4.1.789.1.12.6.1.5 |
dafsExportAccessListA textual string containing information about the export. This is the list of hosts that may access the export. If empty, all hosts may access the export.ro DisplayString .1.3.6.1.4.1.789.1.12.6.1.6 |
vi OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.13 |
viaNodeConnection OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.13.1 |
viaNodeSystemNameA string by which the node is identified in the cluster.ro DisplayString .1.3.6.1.4.1.789.1.13.1.1 |
viaCreatedThe number of VIs created.ro Integer32 .1.3.6.1.4.1.789.1.13.1.2 |
viaConnectRequestThe number of times Connect Request call is made.ro Counter32 .1.3.6.1.4.1.789.1.13.1.3 |
viaConnectWaitThe number of times Connect wait call is made.ro Counter32 .1.3.6.1.4.1.789.1.13.1.4 |
viaDisconnectNumber of times VI got disconnected with out any error.ro Counter32 .1.3.6.1.4.1.789.1.13.1.5 |
viaConnectTimeOutNumber of times VI connect request got timed out.ro Counter32 .1.3.6.1.4.1.789.1.13.1.6 |
viaConnectedNumber of time VI got connected with out any error.ro Counter32 .1.3.6.1.4.1.789.1.13.1.7 |
viaCurrConnectPendingThe number of VIs for which connect request is pending.ro Gauge32 .1.3.6.1.4.1.789.1.13.1.8 |
viaCurrConnectWaitPendingThe number of VIs for which connect wait request is pending.ro Gauge32 .1.3.6.1.4.1.789.1.13.1.9 |
viaCurrConnectedThe number of VIs for which the current state is CONNECTED.ro Gauge32 .1.3.6.1.4.1.789.1.13.1.10 |
viaCurrErrorThe number of VIs for which the current state is ERRORro Gauge32 .1.3.6.1.4.1.789.1.13.1.11 |
viaTotalErrorThe number of VIs which encountered error state.ro Counter32 .1.3.6.1.4.1.789.1.13.1.12 |
viaInMsgsThe total number of incoming Messages received.ro Counter32 .1.3.6.1.4.1.789.1.13.1.13 |
viaInRdmaThe total number of incoming RDMA requests received.ro Counter32 .1.3.6.1.4.1.789.1.13.1.14 |
viaInBytesThe total number of incoming bytes received, including those received in error. This count includes bytes received on currently established connections. This corresponds to the sum of bytes received through received messages, incoming RDMA writes and RDMA reads issuedro Counter32 .1.3.6.1.4.1.789.1.13.1.15 |
viaInRDMAReadBytesThe total number of incoming bytes received through RDMA read, including those received in error. This count includes bytes received on currently established connections.ro Counter32 .1.3.6.1.4.1.789.1.13.1.16 |
viaInRDMAWriteBytesThe total number of bytes received through incoming RDMA writes, including those received in error. This count includes bytes received on currently established connections.ro Counter32 .1.3.6.1.4.1.789.1.13.1.17 |
viaOutMsgsThe total number of Messages sent.ro Counter32 .1.3.6.1.4.1.789.1.13.1.18 |
viaOutRdmaThe total number of RDMA requests sent.ro Counter32 .1.3.6.1.4.1.789.1.13.1.19 |
viaOutBytesThe total number of bytes sent, including those sent in error. This count includes bytes sent on currently established connections.ro Counter32 .1.3.6.1.4.1.789.1.13.1.20 |
viaOutRDMAReadBytesThe total number of bytes sent through an incoming RDMA read request, including those sent in error. This count includes bytes sent on currently established connections.ro Counter32 .1.3.6.1.4.1.789.1.13.1.21 |
viaOutRDMAWriteBytesThe total number of bytes sent through a RDMA write operation, including those sent in error. This count includes bytes sent on currently established connections.ro Counter32 .1.3.6.1.4.1.789.1.13.1.22 |
viaConnTableA table containing via connection specific information. SEQUENCE OF ViaConnEntry .1.3.6.1.4.1.789.1.13.1.23 |
viaConnEntryA conceptual row of the viaConnTable containing information about a particular current via connection. Each row of this table is transient, and it ceases to exist when the connection makes transition to the CLOSED state. ViaConnEntry .1.3.6.1.4.1.789.1.13.1.23.1 |
viaConnStateThe state of this via connection Legal States: Idle 1 Pending Connect 2 Connected 3 Error 4ro Enumeration .1.3.6.1.4.1.789.1.13.1.23.1.1 |
viaConnVINumberA number which uniquely defines a connection.ro Integer32 .1.3.6.1.4.1.789.1.13.1.23.1.2 |
viaConnRemoteNetAddressIP address of the remote system of the connection.ro IpAddress .1.3.6.1.4.1.789.1.13.1.23.1.3 |
viaConnLocalNetAddressLocal IPadress of the connection.ro IpAddress .1.3.6.1.4.1.789.1.13.1.23.1.4 |
viaConnRemotePortNumberRemote TCP portnumber of the connection.ro Integer32 .1.3.6.1.4.1.789.1.13.1.23.1.5 |
viaConnLocalPortNumberLocal TCP Portnumber of the connection.ro Integer32 .1.3.6.1.4.1.789.1.13.1.23.1.6 |
viaConnLocalDescriminatorAn identifier used by the local process to identify the VI connection.ro OCTET STRING .1.3.6.1.4.1.789.1.13.1.23.1.7 |
viaConnRemoteDescriminatorAn identifier used by the remote process to identify the VI connection.ro OCTET STRING .1.3.6.1.4.1.789.1.13.1.23.1.8 |
viaConnLocalMaxTransferSizeThe local limit on the maximum packet size that can be transfered through the connection.ro Integer32 .1.3.6.1.4.1.789.1.13.1.23.1.9 |
viaConnRemoteMaxTransferSizeThe remote limit on the maximum packet size that can be transfered through the connection.ro Integer32 .1.3.6.1.4.1.789.1.13.1.23.1.10 |
viaConnLocalEnableRdmaWriteThe value is 1 if remote DMA write is enabled in the local system otherwise, it is 0.ro Integer32 .1.3.6.1.4.1.789.1.13.1.23.1.11 |
viaConnLocalEnableRdmaReadThe value is 1 if remote DMA read is enabled in the local system otherwise, it is 0.ro Integer32 .1.3.6.1.4.1.789.1.13.1.23.1.12 |
viaConnRemoteEnableRdmaWriteThe value is 1 if remote DMA write is enabled in the remote system otherwise, it is 0.ro Integer32 .1.3.6.1.4.1.789.1.13.1.23.1.13 |
viaConnRemoteEnableRdmaReadThe value is 1 if remote DMA read is enabled in the remote system otherwise, it is 0.ro Integer32 .1.3.6.1.4.1.789.1.13.1.23.1.14 |
viaConnSentMessagesTotal number of messages sent through the connection.ro Counter32 .1.3.6.1.4.1.789.1.13.1.23.1.15 |
viaConnSentRdmaReadMessagesTotal number of rdma read messages sent through the connection.ro Counter32 .1.3.6.1.4.1.789.1.13.1.23.1.16 |
viaConnSentRdmaWriteMessagesTotal number of rdma write messages sent through the connection.ro Counter32 .1.3.6.1.4.1.789.1.13.1.23.1.17 |
viaConnRcvdMessagesTotal number of messages received through the connection.ro Counter32 .1.3.6.1.4.1.789.1.13.1.23.1.18 |
viaConnRcvdRdmaReadMessagesTotal number of rdma read messages received through the connection.ro Counter32 .1.3.6.1.4.1.789.1.13.1.23.1.19 |
viaConnRcvdRdmaWriteMessagesTotal number of rdma write messages received through the connection.ro Counter32 .1.3.6.1.4.1.789.1.13.1.23.1.20 |
viaErrors OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.13.2 |
viaErrPostDescThe total number of descriptors completed in error by NIC.ro Counter32 .1.3.6.1.4.1.789.1.13.2.1 |
viaErrConnLostThe total number of Lost Connection errors.ro Counter32 .1.3.6.1.4.1.789.1.13.2.2 |
viaErrRecvQEmptyThe total number of errors due to an empty receive Queue.ro Counter32 .1.3.6.1.4.1.789.1.13.2.3 |
viaErrRdmawProtThe total number of remote DMA write protection errors.ro Counter32 .1.3.6.1.4.1.789.1.13.2.4 |
viaErrRdmarProtThe total number of remote DMA read protection errors.ro Counter32 .1.3.6.1.4.1.789.1.13.2.5 |
viaErrCompProtThe total number of protection errors.ro Counter32 .1.3.6.1.4.1.789.1.13.2.6 |
viaErrorThresholdSetting this threshold will cause a trap to be enabled such that if the total error exceeds error threshold set a viaNodeErrorsTrap trap will be generated.ro Integer32 .1.3.6.1.4.1.789.1.13.2.7 |
viaNicAttributes OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.13.3 |
viaNicTableA table containing via NIC-specific information. SEQUENCE OF ViaNicEntry .1.3.6.1.4.1.789.1.13.3.1 |
viaNicEntryA conceptual row of the viaNicTable containing information about a particular present VINic. ViaNicEntry .1.3.6.1.4.1.789.1.13.3.1.1 |
viaNicIndexThe index of the NIC in the NIC table.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.1 |
viaNameThe symbolic name of the NIC device.ro DisplayString .1.3.6.1.4.1.789.1.13.3.1.1.2 |
viaHardwareVersionThe version of the VINIC described by this MIB.ro DisplayString .1.3.6.1.4.1.789.1.13.3.1.1.3 |
viaProviderVersionThe version of the VI provider.ro DisplayString .1.3.6.1.4.1.789.1.13.3.1.1.4 |
viaNicAddressThe Network address of this NIC.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.789.1.13.3.1.1.5 |
viaThreadSafe1 if synchronisation model is thread safe else 0.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.6 |
viaMaxDiscriminatorLengthThe maximum number of bytes that the VI provider allows for a connection descriminator.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.7 |
viaMaxRegisterBytesMaximum number of bytes that can be registered.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.8 |
viaMaxRegisterRegionsMaximum number of memory regions that can be registered.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.9 |
viaMaxRegisterBlockBytesLargest contiguous block of memory that can be registered.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.10 |
viaMaxVIThe limit on the total number of VI instances this entity can support.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.11 |
viaMaxDescriptorsPerQueueMaximum Descriptors per VI Work Queue that this VI provider can support.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.12 |
viaMaxSegmentsPerDescMaximum number of segments per descriptor that this VI provider can support.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.13 |
viaMaxCQMaximum number of completion queues this VI provider can support.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.14 |
viaMaxCQEntriesMaximum number of Completion queue entries per completion queue that this VI provider can support.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.15 |
viaMaxTransferSizeThe maximum transfer size supported by the VI Nic. The maximum transfer size is the amount of data that can be described by a single VI descriptor.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.16 |
viaNativeMTUThe native MTU size of the underlying network. For frame-based networks, this could reflect its native frame size. For cell-based networks, it could reflect the MTU of the appropriate abstraction layer that it supports.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.17 |
viaMaxPTagsThe maximum number of protection tags that are supported by this VI provider.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.18 |
viaCurrRegisterBytesNumber of bytes registered by the VI user for this NIC.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.19 |
viaCurrRegisterRegionsNumber of memory regions that is registered by VI user for this NIC.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.20 |
viaCurrVIThe current number of VI instances for this NIC.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.21 |
viaCurrCQCurrent number of completion queues this VI provider has.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.22 |
viaCurrPTagsCurrent Number of protection tags this VI provider has.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.23 |
viaConnectionListenPortPort number on which VI server is listening for VI connection request.ro Integer32 .1.3.6.1.4.1.789.1.13.3.1.1.24 |
backup OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.14 |
dump OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.14.1 |
dmpActivesNumber of active dump.ro Integer32 .1.3.6.1.4.1.789.1.14.1.1 |
dmpAttemptsNumber of dump attempted.ro Counter32 .1.3.6.1.4.1.789.1.14.1.2 |
dmpSuccessesNumber of dump succeeded.ro Counter32 .1.3.6.1.4.1.789.1.14.1.3 |
dmpFailuresNumber of dump failed.ro Counter32 .1.3.6.1.4.1.789.1.14.1.4 |
dmpTableProvides a report of dumps on each dump subtree. SEQUENCE OF DmpEntry .1.3.6.1.4.1.789.1.14.1.5 |
dmpEntryShows statistics of dumps on an unique dump subtree. DmpEntry .1.3.6.1.4.1.789.1.14.1.5.1 |
dmpIndexIndex into the subtree dump table.ro Integer32 .1.3.6.1.4.1.789.1.14.1.5.1.1 |
dmpStPathThe full path to the dump subtree. In the format of /vol/<volname>/...ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.14.1.5.1.2 |
dmpStAttemptsNo. of dump attempted for the subtree.ro Counter32 .1.3.6.1.4.1.789.1.14.1.5.1.3 |
dmpStSuccessesNo. of dump succeeded for the subtree.ro Counter32 .1.3.6.1.4.1.789.1.14.1.5.1.4 |
dmpStFailuresNo. of dump failed for the subtree.ro Counter32 .1.3.6.1.4.1.789.1.14.1.5.1.5 |
dmpTimeThe start time for the last attempt to dump the subtree, including the currently running one. The time in seconds since January 1, 1970.ro Integer32 .1.3.6.1.4.1.789.1.14.1.5.1.6 |
dmpStatusThe status for the last dump attempt on the subtree.ro Enumeration .1.3.6.1.4.1.789.1.14.1.5.1.7 |
dmpLevelThe level of the dump.ro Integer32 .1.3.6.1.4.1.789.1.14.1.5.1.8 |
dmpNumFilesThe number of files dumped.ro Integer32 .1.3.6.1.4.1.789.1.14.1.5.1.9 |
dmpDataAmountThe amount of data dumped, in Megabytes.ro Integer32 .1.3.6.1.4.1.789.1.14.1.5.1.10 |
dmpStartTimeThe start time of the dump. The time is in seconds since January 1, 1970.ro Integer32 .1.3.6.1.4.1.789.1.14.1.5.1.11 |
dmpDurationThe duration of the dump.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.789.1.14.1.5.1.12 |
restore OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.14.2 |
rstActivesNumber of active restore.ro Integer32 .1.3.6.1.4.1.789.1.14.2.1 |
rstAttemptsNumber of restore attempted.ro Counter32 .1.3.6.1.4.1.789.1.14.2.2 |
rstSuccessesNumber of restore succeeded.ro Counter32 .1.3.6.1.4.1.789.1.14.2.3 |
rstFailuresNumber of restore failed.ro Counter32 .1.3.6.1.4.1.789.1.14.2.4 |
vfiler OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.16 |
vfilerIsLicensedWhether vfiler is licensed on the filer.ro Enumeration .1.3.6.1.4.1.789.1.16.1 |
vfFilersNumber of vfilers in the physical Filer.ro Counter32 .1.3.6.1.4.1.789.1.16.2 |
vfTableProvide a report of per-vfiler general information SEQUENCE OF VfEntry .1.3.6.1.4.1.789.1.16.3 |
vfEntryProvide a report of per-vfiler information VfEntry .1.3.6.1.4.1.789.1.16.3.1 |
vfIndexA number that identifies this entry for the referenced vfiler.ro Integer32 .1.3.6.1.4.1.789.1.16.3.1.1 |
vfNameA textual string that contains the name of the referenced vfiler.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.16.3.1.2 |
vfUuidThe UUID of the referenced vfiler.ro OCTET STRING .1.3.6.1.4.1.789.1.16.3.1.3 |
vfIpAddressesThe total number of IP addresses for the referenced vfiler.ro Integer32 .1.3.6.1.4.1.789.1.16.3.1.4 |
vfStoragePathsThe total number of storage paths for the referenced vfiler.ro Integer32 .1.3.6.1.4.1.789.1.16.3.1.5 |
vfIpSpaceA textual string that contains the name of the ipspace that the referenced vfiler belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.16.3.1.6 |
vfAllowedProtocolsTotal number of protocols allowed for the referenced vfiler.ro Integer32 .1.3.6.1.4.1.789.1.16.3.1.7 |
vfDisallowedProtocolsTotal number of protocols disallowed for the referenced vfiler.ro Integer32 .1.3.6.1.4.1.789.1.16.3.1.8 |
vfStateStatus of the vfiler: Running or stopped.ro Enumeration .1.3.6.1.4.1.789.1.16.3.1.9 |
vfIpTableProvide a report of per-vfiler IP addresses information SEQUENCE OF VfIpEntry .1.3.6.1.4.1.789.1.16.4 |
vfIpEntryProvide a report of per-vfiler IP addresses information VfIpEntry .1.3.6.1.4.1.789.1.16.4.1 |
vfFiIndexA number that identifies the referenced vfiler.ro Integer32 .1.3.6.1.4.1.789.1.16.4.1.1 |
vfIpIndexA number that identifies which IP address in the referenced vfiler.ro Integer32 .1.3.6.1.4.1.789.1.16.4.1.2 |
vfIpAddrA IP address for the referenced vfiler.ro IpAddress .1.3.6.1.4.1.789.1.16.4.1.3 |
vfSpTableProvide a report of per-vfiler storage path information SEQUENCE OF VfSpEntry .1.3.6.1.4.1.789.1.16.5 |
vfSpEntryProvide a report of per-vfiler storage path information VfSpEntry .1.3.6.1.4.1.789.1.16.5.1 |
vfFsIndexA number that identifies the referenced vfiler.ro Integer32 .1.3.6.1.4.1.789.1.16.5.1.1 |
vfSpIndexA number that identifies which storage path in the referenced vfiler.ro Integer32 .1.3.6.1.4.1.789.1.16.5.1.2 |
vfSpNameThe storage path name for the referenced vfiler.ro OCTET STRING .1.3.6.1.4.1.789.1.16.5.1.3 |
vfProTableProvide a report of per-vfiler protocol information SEQUENCE OF VfProEntry .1.3.6.1.4.1.789.1.16.6 |
vfProEntryProvide a report of per-vfiler protocol information VfProEntry .1.3.6.1.4.1.789.1.16.6.1 |
vfFpIndexA number that identifies the referenced vfiler.ro Integer32 .1.3.6.1.4.1.789.1.16.6.1.1 |
vfProIndexA number that identifies a protocol in the referenced vfiler.ro Integer32 .1.3.6.1.4.1.789.1.16.6.1.2 |
vfProNameA textual string that contains the protocol name for the referenced vfiler.ro OCTET STRING .1.3.6.1.4.1.789.1.16.6.1.3 |
vfProStatusWhether the referenced vfiler protocol is allowed or disallowed.ro Enumeration .1.3.6.1.4.1.789.1.16.6.1.4 |
blocks OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.17 |
fcpIsLicensedWhether FCP access protocols are licensed on the filer.ro Enumeration .1.3.6.1.4.1.789.1.17.1 |
iscsiIsLicensedWhether iSCSI access protocols are licensed on the filer.ro Enumeration .1.3.6.1.4.1.789.1.17.2 |
fcpLowReadBytesThe total number of bytes read via FCP since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use fcp64ReadBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.3 |
fcpHighReadBytesThe total number of bytes read via FCP since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use fcp64ReadBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.4 |
fcpLowWriteBytesThe total number of bytes written via FCP since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use fcp64WriteBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.5 |
fcpHighWriteBytesThe total number of bytes written via FCP since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use fcp64WriteBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.6 |
iscsiLowReadBytesThe total number of bytes read via iSCSI since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use iscsi64ReadBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.7 |
iscsiHighReadBytesThe total number of bytes read via iSCSI since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use iscsi64ReadBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.8 |
iscsiLowWriteBytesThe total number of bytes written via iSCSI since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use iscsi64WriteBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.9 |
iscsiHighWriteBytesThe total number of bytes written via iSCSI since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use iscsi64WriteBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.10 |
iscsiHighOpsThe total number of iSCSI ops handled since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use iscsi64Ops instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.11 |
iscsiLowOpsThe total number of iSCSI ops handled since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use iscsi64Ops instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.12 |
fcpHighOpsThe total number of FCP ops handled since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use fcp64Ops instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.13 |
fcpLowOpsThe total number of FCP ops handled since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use fcp64Ops instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.14 |
lun OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.17.15 |
lunCountNumber of LUNs in the Filer in 7-mode. Unsupported in C-mode.ro Integer32 .1.3.6.1.4.1.789.1.17.15.1 |
lunTableProvide a report of per-LUN general information SEQUENCE OF LunEntry .1.3.6.1.4.1.789.1.17.15.2 |
lunEntryProvide a report of per-LUN information LunEntry .1.3.6.1.4.1.789.1.17.15.2.1 |
lunIndexA number that identifies the referenced LUN.ro Integer32 .1.3.6.1.4.1.789.1.17.15.2.1.1 |
lunNameThe name of the LUN. This is also the path to the LUN on the filer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.15.2.1.2 |
lunCommentThe comment, if any, for this LUN.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.15.2.1.3 |
lunSizeLowSize of the LUN in bytes. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lunSize64 instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.17.15.2.1.4 |
lunSizeHighSize of the LUN in bytes. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lunSize64 instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.17.15.2.1.5 |
lunMappedThis LUN has been mapped to at least one initiator group.ro Enumeration .1.3.6.1.4.1.789.1.17.15.2.1.6 |
lunSerialNumberThe 12 character SCSI serial number of the LUN.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.15.2.1.7 |
lunQtreeNameA string that indicates which qtree this LUN belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.15.2.1.8 |
lunHighOpsThe total number of Target side SCSI ops for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64Ops instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.9 |
lunLowOpsThe total number of Target side SCSI ops for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64Ops instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.10 |
lunHighReadBytesThe total number of bytes read from this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64ReadBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.11 |
lunLowReadBytesThe total number of bytes read from this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64ReadBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.12 |
lunHighWriteBytesThe total number of bytes written to this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64WriteBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.13 |
lunLowWriteBytesThe total number of bytes written to this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64WriteBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.14 |
lunHighErrorsThe total number of errors seen on this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64Errors instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.15 |
lunLowErrorsThe total number of errors seen on this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64Errors instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.16 |
lunOnlineWhether the LUN is online.ro Enumeration .1.3.6.1.4.1.789.1.17.15.2.1.17 |
lunSnapStatusWhether a snapshot of this LUN can be taken. Not supported in c-mode.ro Enumeration .1.3.6.1.4.1.789.1.17.15.2.1.18 |
lunShareStatusThe sharing status for the LUN. Not supported in c-mode.ro Enumeration .1.3.6.1.4.1.789.1.17.15.2.1.19 |
lunSpaceReservedWhether the LUN has space reservation enabled.ro Enumeration .1.3.6.1.4.1.789.1.17.15.2.1.20 |
lunStatsResetTimeNumber of seconds since this LUN's stats were last reset.ro Integer32 .1.3.6.1.4.1.789.1.17.15.2.1.21 |
lunHighReadOpsThe total number of Target side SCSI read ops for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64ReadOps instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.22 |
lunLowReadOpsThe total number of Target side SCSI read ops for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64ReadOps instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.23 |
lunHighWriteOpsThe total number of Target side SCSI write ops for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64WriteOps instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.24 |
lunLowWriteOpsThe total number of Target side SCSI write ops for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64WriteOps instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.25 |
lunHighOtherOpsThe total number of Target side SCSI ops that are not read or write for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64OtherOps instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.26 |
lunLowOtherOpsThe total number of Target side SCSI ops that are not read or write for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lun64OtherOps instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.17.15.2.1.27 |
lunSize64Size of the LUN in bytes. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.17.15.2.1.28 |
lun64OpsThe total number of Target side SCSI ops for this LUN since the stats were last reset. This object all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.17.15.2.1.29 |
lun64ReadBytesThe total number of bytes read from this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.17.15.2.1.30 |
lun64WriteBytesThe total number of bytes written to this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.17.15.2.1.31 |
lun64ErrorsThe total number of errors seen on this LUN since the stats were last reset. This object returns all the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.17.15.2.1.32 |
lun64ReadOpsThe total number of Target side SCSI read ops for this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.17.15.2.1.33 |
lun64WriteOpsThe total number of Target side SCSI write ops for this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.17.15.2.1.34 |
lun64OtherOpsThe total number of Target side SCSI ops that are not read or write for this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.17.15.2.1.35 |
lunAlignmentThe alignment of the LUN. Possible values are: 'aligned': LUN is aligned. 'misaligned': LUN is misaligned. 'possibly_misaligned': LUN is possibly misaligned. 'indeterminate': Not enough information is available to determine LUN alignment.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.15.2.1.36 |
lunVserverName of the vserver to which the LUN belongs. This field is returned only from the c-mode cluster and vserver management interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.15.2.1.37 |
lunMapTableProvide a table listing the initiator group to Logical Unit Number mapping for each LUN. SEQUENCE OF LunMapEntry .1.3.6.1.4.1.789.1.17.15.3 |
lunMapEntryProvide a per LUN and Initiator group mapping of SCSI logical unit numbers. LunMapEntry .1.3.6.1.4.1.789.1.17.15.3.1 |
lunMapLUNIndexA number that identifies the LUN in the table.ro Integer32 .1.3.6.1.4.1.789.1.17.15.3.1.1 |
lunMapInitiatorGroupIndexA number that identifies an initiator group in the table.ro Integer32 .1.3.6.1.4.1.789.1.17.15.3.1.2 |
lunMapLUNNameThe name of the LUN.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.15.3.1.3 |
lunMapInitiatorGroupNameThe name of the initiator group that this LUN is mapped to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.15.3.1.4 |
lunMapLogicalUnitNumberSCSI Logical Unit Number that this LUN is mapped to for this initiator group.ro Integer32 .1.3.6.1.4.1.789.1.17.15.3.1.5 |
lunMapVserverName of the vserver containing the LUN and initiator group. This field is returned only from the c-mode management and cluster interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.15.3.1.6 |
initiator OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.17.16 |
initiatorGroupTableProvide a report of per-initiator group general information SEQUENCE OF InitiatorGroupEntry .1.3.6.1.4.1.789.1.17.16.1 |
initiatorGroupEntryProvide a report of per-initiator group information InitiatorGroupEntry .1.3.6.1.4.1.789.1.17.16.1.1 |
initiatorGroupIndexA number that identifies a specific initiator group.ro Integer32 .1.3.6.1.4.1.789.1.17.16.1.1.1 |
initiatorGroupNameThe name of the initiator groupro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.16.1.1.2 |
initiatorGroupTypeType of this initiator group, either iSCSI or FCPro Enumeration .1.3.6.1.4.1.789.1.17.16.1.1.3 |
initiatorGroupOSOperating system the clients in this initiator group run. This governs the finer details of SCSI protocol interaction with these initiatorsro Enumeration .1.3.6.1.4.1.789.1.17.16.1.1.4 |
initiatorGroupThrottleReservePercentage of filer scsi command blocks reserved for this initiator groupro Integer32 .1.3.6.1.4.1.789.1.17.16.1.1.5 |
initiatorGroupThrottleBorrowTrue if this inititiator group is allowed to exceed its throttle settings if more resources are needed and otherwise available. If initiatorGroupThrottleReserve is 0, this value is meaninglessro Enumeration .1.3.6.1.4.1.789.1.17.16.1.1.6 |
initiatorGroupUsePartnerThe takeover mode for the initiator group. This is only applicable to FCP initiator groups on clustered filersro Enumeration .1.3.6.1.4.1.789.1.17.16.1.1.7 |
initiatorGroupUseALUAIf true this initiator group supports Asymetric Logical Unit Access.ro Enumeration .1.3.6.1.4.1.789.1.17.16.1.1.8 |
initiatorGroupVserverName of the vserver containing the initiator group. This field is available only from the c-mode cluster and vserver management interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.16.1.1.9 |
initiatorGroupMemberTableTable of individual Initator names in each Initiator group SEQUENCE OF InitiatorGroupMemberEntry .1.3.6.1.4.1.789.1.17.16.2 |
initiatorGroupMemberEntryProvide a report of per-initiator group information InitiatorGroupMemberEntry .1.3.6.1.4.1.789.1.17.16.2.1 |
initiatorGroupMemberIndexA number that identifies a specific initiator group.ro Integer32 .1.3.6.1.4.1.789.1.17.16.2.1.1 |
initiatorGroupMemberNameIndexA number the identifies the initiator in the group.ro Integer32 .1.3.6.1.4.1.789.1.17.16.2.1.2 |
initiatorNameA textual name for this initiator.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.16.2.1.3 |
initiatorListTableTable of initiators that are connected to the filer. SEQUENCE OF InitatorListEntry .1.3.6.1.4.1.789.1.17.16.3 |
initiatorListEntryProvide a report of per-connected-initiator information. InitatorListEntry .1.3.6.1.4.1.789.1.17.16.3.1 |
initiatorListEntryIndexA number that identifies the initiator connected to the target adapter.ro Integer32 .1.3.6.1.4.1.789.1.17.16.3.1.1 |
targetAdapterNameThe name of the target adapter in the filer. In c-mode, this field returns the target LIF name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.16.3.1.2 |
connectedInitiatorNodeNameA textual name for this initiator node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.16.3.1.3 |
connectedInitiatorPortNameThe FibreChannel device's portname. This is FCP only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.16.3.1.4 |
connectedInitiatorTypeType of this init group, either iSCSI or FCPro Enumeration .1.3.6.1.4.1.789.1.17.16.3.1.5 |
connectedInitiatorIsidThe iSCSI isid (initiator session id) for this initiator. This is iSCSI only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.16.3.1.6 |
connectedInitiatorPortalGroupThe iSCSI portal group ID for this initiator. This is iSCSI only.ro Integer32 .1.3.6.1.4.1.789.1.17.16.3.1.7 |
connectedInitiatorVserverName of the vserver hosting the LIF on which the initiator connection is made. This field is returned only from the c-mode cluster and vserver management interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.16.3.1.8 |
fcpTarget OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.17.17 |
fcpTargetTableProvide a report of fcp target adapter general information. This table is not available from the c-mode management interfaces SEQUENCE OF FcpTargetTableEntry .1.3.6.1.4.1.789.1.17.17.1 |
fcpTargetTableEntryProvide a report of per fcp target device information FcpTargetTableEntry .1.3.6.1.4.1.789.1.17.17.1.1 |
fcpTargetTableIndexA number that identifies a specific fcp target device.ro Integer32 .1.3.6.1.4.1.789.1.17.17.1.1.1 |
fcpTargetNameThe name of the fcp target devicero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.17.1.1.2 |
fcpTargetNNThe FC WWNN of the fcp target devicero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.17.1.1.3 |
fcpTargetPNThe FC WWPN of the fcp target devicero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.17.1.1.4 |
fcpTargetSpeedspeed in gigabits per second. 0 is unknown.ro Integer32 .1.3.6.1.4.1.789.1.17.17.1.1.5 |
fcpTargetStatusStatus of the fcp target adapterro Enumeration .1.3.6.1.4.1.789.1.17.17.1.1.6 |
fcpTargetStandbyWhether this target adapter is in standby mode.ro Enumeration .1.3.6.1.4.1.789.1.17.17.1.1.7 |
fcpTargetTopologyfibre channel topology for this adapter.ro Enumeration .1.3.6.1.4.1.789.1.17.17.1.1.8 |
fcpTargetTypeResponsibility/Type for this adapter.ro Enumeration .1.3.6.1.4.1.789.1.17.17.1.1.9 |
fcpCfModeFailover setting for the FCP target cluster. This field is not available from the c-mode management interfacesro Enumeration .1.3.6.1.4.1.789.1.17.18 |
pset OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.17.19 |
psetTableProvide a report of portset general information SEQUENCE OF PortSetEntry .1.3.6.1.4.1.789.1.17.19.1 |
psetEntryProvide a report of portset information PortSetEntry .1.3.6.1.4.1.789.1.17.19.1.1 |
psetIndexA number that identifies a specific port set.ro Integer32 .1.3.6.1.4.1.789.1.17.19.1.1.1 |
psetNameThe name of the port setro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.19.1.1.2 |
psetTypeType of this port set, either iSCSI, fcp or mixed.ro Enumeration .1.3.6.1.4.1.789.1.17.19.1.1.3 |
psetVserverName of the vserver to which the port set belongs. This field is returned only from the c-mode cluster and vserver management interfaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.19.1.1.4 |
psetMemberTableTable of individual Port names in each Port set SEQUENCE OF PsetMemberEntry .1.3.6.1.4.1.789.1.17.19.2 |
psetMemberEntryProvide a report of portset port information PsetMemberEntry .1.3.6.1.4.1.789.1.17.19.2.1 |
psetMemberIndexA number that identifies a specific port set.ro Integer32 .1.3.6.1.4.1.789.1.17.19.2.1.1 |
psetMemberNameIndexA number the identifies the port in the set.ro Integer32 .1.3.6.1.4.1.789.1.17.19.2.1.2 |
psetPortNameA textual name for this port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.19.2.1.3 |
psetPortVserverName of the vserver to which the port set and LIFs in the port set belong. This field is available from c-mode management interfaces only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.19.2.1.4 |
fcp64ReadBytesThe total number of bytes read via FCP since the last boot. This object returns all of the 64 bit unsigned integer. This field is not available from the c-mode management interfacesro Counter64 .1.3.6.1.4.1.789.1.17.20 |
fcp64WriteBytesThe total number of bytes written via FCP since the last boot. This object returns all of the 64 bit unsigned integer. This field is not available from the c-mode management interfacesro Counter64 .1.3.6.1.4.1.789.1.17.21 |
iscsi64ReadBytesThe total number of bytes read via iSCSI since the last boot. This object returns all of the 64 bit unsigned integer. This field is not available from the c-mode management interfacesro Counter64 .1.3.6.1.4.1.789.1.17.22 |
iscsi64WriteBytesThe total number of bytes written via iSCSI since the last boot. This object returns all of the 64 bit unsigned integer. This field is not available from the c-mode management interfacesro Counter64 .1.3.6.1.4.1.789.1.17.23 |
iscsi64OpsThe total number of iSCSI ops handled since the last boot. This object returns all of the 64 bit unsigned integer. This field is not available from the c-mode management interfacesro Counter64 .1.3.6.1.4.1.789.1.17.24 |
fcp64OpsThe total number of FCP ops handled since the last boot. This object returns all of the 64 bit unsigned integer. This field is not available from the c-mode management interfacesro Counter64 .1.3.6.1.4.1.789.1.17.25 |
fcpTargetPort OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.17.26 |
fcpTargetPortTableProvide a report of fcp target port general information This table is available from c-mode management interfaces only. SEQUENCE OF FcpTargetPortTableEntry .1.3.6.1.4.1.789.1.17.26.1 |
fcpTargetPortTableEntryProvide a report of per fcp target port device information. FcpTargetPortTableEntry .1.3.6.1.4.1.789.1.17.26.1.1 |
fcpTargetPortNodeNameName of the node hosting the FCP target port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.26.1.1.1 |
fcpTargetPortNameFCP target port name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.26.1.1.2 |
fcpTargetPortSpeedSpeed in gigabits per second. 0 indicates speed is set to auto.ro Integer32 .1.3.6.1.4.1.789.1.17.26.1.1.3 |
fcpTargetPortStandbyWhether this target adapter is in standby mode.ro Enumeration .1.3.6.1.4.1.789.1.17.26.1.1.4 |
fcpTargetPortTopologyFibre channel topology for this adapter.ro Enumeration .1.3.6.1.4.1.789.1.17.26.1.1.5 |
fcpTargetLif OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.17.27 |
fcpTargetLifTableProvide a report of FCP target LIFs general information. This table is available from c-mode management interfaces only. SEQUENCE OF FcpTargetLifTableEntry .1.3.6.1.4.1.789.1.17.27.1 |
fcpTargetLifTableEntryProvide a report of per fcp target LIF information. FcpTargetLifTableEntry .1.3.6.1.4.1.789.1.17.27.1.1 |
fcpTargetLifVserverVserver containing the FCP target LIF.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.27.1.1.1 |
fcpTargetLifNameThe name of the FCP target device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.27.1.1.2 |
fcpTargetLifHomeNodeThe home node of the FCP target LIF.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.27.1.1.3 |
fcpTargetLifHomePortThe home port of the FCP target LIF.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.27.1.1.4 |
fcpTargetLifNNThe FC WWNN of the FCP target hosting the LIF.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.27.1.1.5 |
fcpTargetLifPNThe FC WWPN of the FCP target LIF.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.17.27.1.1.6 |
fcpTargetLifStatusAdminStatus of the FCP target LIF assigned by an administrator.ro Enumeration .1.3.6.1.4.1.789.1.17.27.1.1.7 |
fcpTargetLifStatusOperOperational status of the FCP target LIF.ro Enumeration .1.3.6.1.4.1.789.1.17.27.1.1.8 |
nfscache OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.18 |
nfsCacheOptions OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.18.1 |
nfsCacheIsEnabledWhether NFS caching is enabled on this system.ro Enumeration .1.3.6.1.4.1.789.1.18.1.1 |
nfsCacheIsLicensedWhether NFS caching is licensed on this system.ro Enumeration .1.3.6.1.4.1.789.1.18.1.2 |
nfsCacheStats OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.18.2 |
nfsCacheBytesFromClientsTotal NFS bytes received from clientsrodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.1 |
nfsCacheBytesToClientsTotal NFS bytes sent to clientsrodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.2 |
nfsCacheBytesFromServersTotal NFS bytes received from serversrodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.3 |
nfsCacheBytesToServersTotal NFS bytes sent to serversrodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.4 |
nfsCacheTotalRequestsTotal NFS requests receivedrodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.5 |
nfsCacheHitRequestsTotal NFS requests resulting in cache hitsrodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.6 |
nfsCacheMissRequestsTotal NFS requests resulting in cache missesrodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.7 |
nfsCacheMissCacheableRequestsTotal NFS requests that were cacheable missesro Counter32 .1.3.6.1.4.1.789.1.18.2.8 |
nfsCacheMissUnCacheableRequestsTotal NFS requests that were uncacheable missesro Counter32 .1.3.6.1.4.1.789.1.18.2.9 |
nfsCacheEjectRequestsTotal NFS requests resulting in object eject due to expirationro Counter32 .1.3.6.1.4.1.789.1.18.2.10 |
nfsCacheVerifyRequestsTotal NFS requests resulting in object verificationro Counter32 .1.3.6.1.4.1.789.1.18.2.11 |
nfsCacheRpcRecordsTotal RPC records receivedro Counter32 .1.3.6.1.4.1.789.1.18.2.12 |
nfsCacheBWSavingsBandwidth savings for NFS requestsro Integer32 .1.3.6.1.4.1.789.1.18.2.13 |
nfsCacheHighBytesFromClientsTotal NFS bytes received from clients. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64BytesFromClients instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.14 |
nfsCacheLowBytesFromClientsTotal NFS bytes received from clients. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64BytesFromClients instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.15 |
nfsCacheHighBytesToClientsTotal NFS bytes sent to clients. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64BytesToClients instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.16 |
nfsCacheLowBytesToClientsTotal NFS bytes sent to clients. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64BytesToClients instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.17 |
nfsCacheHighBytesFromServersTotal NFS bytes received from servers. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64BytesFromServers instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.18 |
nfsCacheLowBytesFromServersTotal NFS bytes received from servers. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64BytesFromServers instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.19 |
nfsCacheHighBytesToServersTotal NFS bytes sent to servers. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64BytesToServers instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.20 |
nfsCacheLowBytesToServersTotal NFS bytes sent to servers. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64BytesToServers instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.21 |
nfsCacheHighTotalRequestsTotal NFS requests received. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64TotalRequests instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.22 |
nfsCacheLowTotalRequestsTotal NFS requests received. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64TotalRequests instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.23 |
nfsCacheHighHitRequestsTotal NFS requests resulting in cache hits. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64HitRequests instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.24 |
nfsCacheLowHitRequestsTotal NFS requests resulting in cache hits. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64HitRequests instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.25 |
nfsCacheHighMissRequestsTotal NFS requests resulting in cache misses. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64MissRequests instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.26 |
nfsCacheLowMissRequestsTotal NFS requests resulting in cache misses. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64MissRequests instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.18.2.27 |
nfsCache64BytesFromClientsTotal NFS bytes received from clients. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.18.2.28 |
nfsCache64BytesToClientsTotal NFS bytes sent to clients. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.18.2.29 |
nfsCache64BytesFromServersTotal NFS bytes received from servers. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.18.2.30 |
nfsCache64BytesToServersTotal NFS bytes sent to servers. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.18.2.31 |
nfsCache64TotalRequestsTotal NFS requests received. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.18.2.32 |
nfsCache64HitRequestsTotal NFS requests resulting in cache hits. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.18.2.33 |
nfsCache64MissRequestsTotal NFS requests resulting in cache misses. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.18.2.34 |
snapvault OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.19 |
svOnIndicates whether snapvault has been turned on or not.ro Enumeration .1.3.6.1.4.1.789.1.19.1 |
svSystemActiveDstNumberNumber of active snapvault destionations.ro Integer32 .1.3.6.1.4.1.789.1.19.2 |
svSystemActiveSrcNumberNumber of active snapvault sources.ro Integer32 .1.3.6.1.4.1.789.1.19.3 |
svSystemTotalPrimarySuccessesTotal number of successful snapvault transfers from the snapvault primary. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.19.4 |
svSystemTotalSecondarySuccessesTotal number of successful snapvault transfers to the snapvault secondary. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.19.5 |
svSystemTotalPrimaryFailuresTotal number of failed snapvault transfers on the snapvault primary. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.19.6 |
svSystemTotalSecondaryFailuresTotal number of failed snapvault transfers on the snapvault secondary. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.19.7 |
svSystemTotalSecondaryDefermentsTotal number of deferred snapvault transfers on the snapvault secondary. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.19.8 |
svPrimaryIsLicensedWhether the snapvault_client(primary) is licensed on the filer.ro Enumeration .1.3.6.1.4.1.789.1.19.9 |
svSecondaryIsLicensedWhether the snapvault_server(secondary) is licensed on the filer.ro Enumeration .1.3.6.1.4.1.789.1.19.10 |
snapvaultStatusTableprovide a list of snapvault status. SEQUENCE OF SnapvaultStatusEntry .1.3.6.1.4.1.789.1.19.11 |
snapvaultStatusEntryProvide a report of current status of snapvault. SnapvaultStatusEntry .1.3.6.1.4.1.789.1.19.11.1 |
svIndexIndex into the snapvault status table.ro Integer32 .1.3.6.1.4.1.789.1.19.11.1.1 |
svSrcSource of the snapvault relationship. <filer>:/vol/<qtree_name>ro OCTET STRING .1.3.6.1.4.1.789.1.19.11.1.2 |
svDstDestionation of the snapvault relationship. <filer>:/vol/<qtree_name>ro OCTET STRING .1.3.6.1.4.1.789.1.19.11.1.3 |
svStatusCurrent transfer status of the snapvault relationship.ro Enumeration .1.3.6.1.4.1.789.1.19.11.1.4 |
svStateCurrent state of the snapvault relationship.ro Enumeration .1.3.6.1.4.1.789.1.19.11.1.5 |
svLagHow far behind from the source the destination is.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.789.1.19.11.1.6 |
svTotalSuccessesTotal number of successful transfer since the snapvault relationship was established. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.19.11.1.7 |
svTotalRestartSuccessesTotal number of successful restarted transfer since the snapvault relationship was established. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.19.11.1.8 |
svTotalFailuresTotal number of failed or aborted transfer since the snapvault relationship was established. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.19.11.1.9 |
svTotalDefermentsTotal number of deferment since the snapvault relationship was established. Persistent across reboot.ro Counter32 .1.3.6.1.4.1.789.1.19.11.1.10 |
svTotalTransMBsTotal transfer size in MB for the snapvault. Reset on reboot.ro Counter32 .1.3.6.1.4.1.789.1.19.11.1.11 |
svTotalTransTimeSecondsTotal number of seconds spent in successful transfer for the snapvault relationship. Reset on reboot.ro Counter32 .1.3.6.1.4.1.789.1.19.11.1.12 |
svThrottleValueCurrent throttle value for the snapvault relationship.ro Integer32 .1.3.6.1.4.1.789.1.19.11.1.13 |
svSrcSnapshotTimeTime when the source snapshot was created. The time in seconds since January 1, 1970. The source snapshot here is the last snapshot successfully transferred from the source to the destination.ro Integer32 .1.3.6.1.4.1.789.1.19.11.1.14 |
svBaseSnapshotThe name of the current base snapshot for the snapvault relationship.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.19.11.1.15 |
svLastTransTypeThe type of the previous successful transfer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.19.11.1.16 |
svLastTransMBsLast successful transfer size in MB for the snapvault relationship.ro Integer32 .1.3.6.1.4.1.789.1.19.11.1.17 |
svLastTransTimeSecondsDuration of last successful transfer in seconds for the snapvault relationship.ro Integer32 .1.3.6.1.4.1.789.1.19.11.1.18 |
snapvaultHostTableProvide a list of remote snapvault hosts. SEQUENCE OF SnapvaultHostEntry .1.3.6.1.4.1.789.1.19.12 |
snapvaultHostEntryProvide snapvault statistics for a remote host which has one or more current established relationships with the local snapvault system. SnapvaultHostEntry .1.3.6.1.4.1.789.1.19.12.1 |
svHostIndexIndex into the snapvault remote host table.ro Integer32 .1.3.6.1.4.1.789.1.19.12.1.1 |
svHostNameThe name of the remote snapvault host.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.19.12.1.2 |
svHostTypeThe type of the remote snapvault host.ro Enumeration .1.3.6.1.4.1.789.1.19.12.1.3 |
svHostTotalSuccessesTotal number of successful snapvault transfers for all current established relationships between the local snapvault system and the given remote host.ro Integer32 .1.3.6.1.4.1.789.1.19.12.1.4 |
svHostTotalFailuresTotal number of failed snapvault transfers for all current established relationships between the local snapvault system and the given remote host.ro Integer32 .1.3.6.1.4.1.789.1.19.12.1.5 |
svHostTotalDefermentsTotal number of deferred snapvault transfers for all current established relationships between the local snapvault system and the given remote host. 0 for snapvault client host.ro Integer32 .1.3.6.1.4.1.789.1.19.12.1.6 |
snapvaultSchedTableProvide a list of snapvault schedules. SEQUENCE OF SnapvaultSchedEntry .1.3.6.1.4.1.789.1.19.13 |
snapvaultSchedEntryProvide a report of schedules of snapvault. SnapvaultSchedEntry .1.3.6.1.4.1.789.1.19.13.1 |
svSchedIndexIndex into the snapvault schedule table.ro Integer32 .1.3.6.1.4.1.789.1.19.13.1.1 |
svSchedVolumeThe name of the volume on the snapvault for the snapvault schedule. This does not have a /vol/ prefix.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.19.13.1.2 |
svSchedSnapshotThe name of the snapshot for the snapvault schedule.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.19.13.1.3 |
svSchedStatusCurrent status of the snapvault schedule.ro Enumeration .1.3.6.1.4.1.789.1.19.13.1.4 |
svSchedTypeThe type of the snapvault schedule.ro Enumeration .1.3.6.1.4.1.789.1.19.13.1.5 |
svSchedScheduleThe update schedule of the snapvault.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.19.13.1.6 |
svDrPrimaryIsLicensedWhether the snapvault disaster recovery primary is licensed on the filer.ro Enumeration .1.3.6.1.4.1.789.1.19.14 |
ftpd OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.20 |
ftpdOnIndicates whether ftpd has been turned on or not.ro Enumeration .1.3.6.1.4.1.789.1.20.1 |
ftpdCurrentConnsNumber of currently open TCP/IP connections to ftp daemon (active and idle)ro Integer32 .1.3.6.1.4.1.789.1.20.2 |
ftpdMaxConnsNumber of maximum simultaneous TCP/IP connections to ftp daemonro Integer32 .1.3.6.1.4.1.789.1.20.3 |
ftpdTotalConnsNumber of total TCP/IP connections to ftp daemonro Integer32 .1.3.6.1.4.1.789.1.20.4 |
storage OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.21 |
enclosure OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.21.1 |
enclNumberThe number of storage enclosures in the storage subsystem.ro Integer32 .1.3.6.1.4.1.789.1.21.1.1 |
enclTableDisplay disk enclosure environmental information for disk shelves that support SCSI Enclosure Services. SEQUENCE OF EnclEntry .1.3.6.1.4.1.789.1.21.1.2 |
enclEntryDisplay disk enclosure (shelf) environmental information for the referenced disk enclosure. EnclEntry .1.3.6.1.4.1.789.1.21.1.2.1 |
enclIndexA number that identifies this enclosure among the possible monitored enclosures. This number normally uniquely identifies one shelf within one boot, but may it change between boots. The number may also change within a boot if shelves are removed and added.ro Integer32 .1.3.6.1.4.1.789.1.21.1.2.1.1 |
enclContactStateThe state of the communication between the filer or storage engine and the enclosure monitoring device in the enclosure.ro Enumeration .1.3.6.1.4.1.789.1.21.1.2.1.2 |
enclChannelShelfAddrThe adapter number or switch name and the port number (together, called the channel), and shelf ID of this enclosure. Examples are 8a.1 and switch:5.1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.3 |
enclProductLogicalIDThe logical identifier of this enclosure. This a form of the World-Wide Name (WWN).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.4 |
enclProductIDThe product ID of the shelf hardware module that provides the enclosure monitoring function. Example is LRC.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.5 |
enclProductVendorThe name of the vendor of this enclosure. Example is Xyratex.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.6 |
enclProductModelThe model name of this enclosure. Example is DiskShelf14.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.7 |
enclProductRevisionThe revision number of this enclosure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.8 |
enclProductSerialNoThe serial number of this enclosure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.9 |
enclNumberDiskBaysThe number of disk bays in this enclosure.ro Integer32 .1.3.6.1.4.1.789.1.21.1.2.1.10 |
enclDisksPresentThe list of disks present by bay number in this enclosure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.11 |
enclPowerSuppliesMaximumThe maximum number of power supplies in this enclosure.ro Integer32 .1.3.6.1.4.1.789.1.21.1.2.1.12 |
enclPowerSuppliesPresentThe list of power supplies present in the enclosure. Numbering is from left to right (top supply, then bottom, on each side, if applicable) in their intended location in the shelf, while facing the supplies.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.13 |
enclPowerSuppliesSerialNosThe list of serial numbers of power supplies present in the enclosure. Not all shelves are able to report the power supply serial number. Communication errors may make the serial number unavailable. The order follows that of enclPowerSuppliesPresentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.14 |
enclPowerSuppliesFailedThe list of failed power supplies in this enclosure, numbered as in enclPowerSuppliesPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.15 |
enclFansMaximumThe maximum number of fans or fan modules monitored by this enclosure. R100/R150 shelf power supply fans are not included in this number.ro Integer32 .1.3.6.1.4.1.789.1.21.1.2.1.16 |
enclFansPresentThe list of fans or fan modules present and for which status is known in this enclosure. Numbering begins with fans on the front of the enclosure, if applicable. Fans are numberedleft-to-right (upper fans, then lower, if applicable) as facing the fans or the modules that contain them, such as power supply modules. R100/R150 shelf power supply fans are not included in this list.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.17 |
enclFansFailedThe list of failed fans or fan modules in this enclosure. Fans are numbered as described in enclFansPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.18 |
enclTempSensorsMaximumThe maximum number of temperature sensors monitored by this enclosure.ro Integer32 .1.3.6.1.4.1.789.1.21.1.2.1.19 |
enclTempSensorsPresentThe list of temperature sensors present and for which status is known in this enclosure. Temperature sensors are numbered top-to-bottom and left-to-right, beginning with the front of the enclosure, then the rear, as the modules containing them are faced.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.20 |
enclTempSensorsOverTempFailThe list of temperature sensors reporting overtemperature failure in this enclosure. Sensors are numbered as in TempSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.21 |
enclTempSensorsOverTempWarnThe list of temperature sensors reporting overtemperature warning in this enclosure. Sensors are numbered as in TempSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.22 |
enclTempSensorsUnderTempFailThe list of temperature sensors reporting undertemperature failure in this enclosure. Sensors are numbered as in TempSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.23 |
enclTempSensorsUnderTempWarnThe list of temperature sensors reporting undertemperature warning in this enclosure. Sensors are numbered as in TempSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.24 |
enclTempSensorsCurrentTempThe list of temperatures reported by all temperature sensors in the enclosure, including the ambient temperature. Sensors are numbered as in TempSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.25 |
enclTempSensorsOverTempFailThrThe list of overtemperature failure thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.26 |
enclTempSensorsOverTempWarnThrThe list of overtemperature warning thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.27 |
enclTempSensorsUnderTempFailThrThe list of undertemperature failure thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.28 |
enclTempSensorsUnderTempWarnThrThe list of undertemperature warning thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.29 |
enclElectronicsMaximumThe number of enclosure services electronics modules that it is possible for this enclosure to detect and/or monitor.ro Integer32 .1.3.6.1.4.1.789.1.21.1.2.1.30 |
enclElectronicsPresentThe list those enclosure services electronics modules present in this enclosure. Numbering is from left-to-right or top-to-bottom in their intended location in the shelf, while facing the electronics modules. It is normal for the R200 FC-AT module to be reported as the second module.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.31 |
enclElectronicsSerialNosThe list of serial numbers of the enclosure services electronics modules present in this enclosure. The order follows that of enclElectronicsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.32 |
enclElectronicsFailedThe list of failed electronics elements. Valid only if enclElectronicsPresent shows that some are present.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.33 |
enclVoltSensorsMaximumThe number of voltage sensors monitored by this enclosure.ro Integer32 .1.3.6.1.4.1.789.1.21.1.2.1.34 |
enclVoltSensorsPresentThe list of voltage sensors present and for which status is known in this enclosure. Voltage sensors are numbered top-to-bottom and left-to-right, as the modules containing them are faced.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.35 |
enclVoltSensorsOverVoltFailThe list of voltage sensors reporting overvoltage failure in this enclosure. Sensors are numbered as in VoltSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.36 |
enclVoltSensorsOverVoltWarnThe list of voltage sensors reporting overvoltage warning in this enclosure. Sensors are numbered as in VoltSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.37 |
enclVoltSensorsUnderVoltFailThe list of voltage sensors reporting undervoltage failure in this enclosure. Sensors are numbered as in VoltSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.38 |
enclVoltSensorsUnderVoltWarnThe list of voltage sensors reporting undervoltage warning in this enclosure. Sensors are numbered as in VoltSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.39 |
enclVoltSensorsCurrentVoltThe list of voltages reported by all voltage sensors in the enclosure, Sensors are numbered as in VoltSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.40 |
enclVoltSensorsOverVoltFailThrThe list of overvoltage failure thresholds for all voltage sensors in the enclosure. Sensors are numbered as in VoltSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.41 |
enclVoltSensorsOverVoltWarnThrThe list of overvoltage warning thresholds for all voltage sensors in the enclosure. Sensors are numbered as in VoltSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.42 |
enclVoltSensorsUnderVoltFailThrThe list of undervoltage failure thresholds for all voltage sensors in the enclosure. Sensors are numbered as in VoltSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.43 |
enclVoltSensorsUnderVoltWarnThrThe list of undervoltage warning thresholds for all voltage sensors in the enclosure. Sensors are numbered as in VoltSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.44 |
enclCurSensorsMaximumThe number of current sensors monitored by this enclosure.ro Integer32 .1.3.6.1.4.1.789.1.21.1.2.1.45 |
enclCurSensorsPresentThe list of current sensors present and for which status is known in this enclosure. Current sensors are numbered top-to-bottom and left-to-right, beginning with the front of the enclosure, then the rear, as the modules containing them are faced.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.46 |
enclCurSensorsOverCurFailThe list of current sensors reporting overcurrent failure in this enclosure. Sensors are numbered as in CurSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.47 |
enclCurSensorsOverCurWarnThe list of current sensors reporting overcurrent warning in this enclosure. Sensors are numbered as in CurSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.48 |
enclCurSensorsCurrentCurThe list of currents reported by all current sensors in the enclosure, Sensors are numbered as in CurSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.49 |
enclCurSensorsOverCurFailThrThe list of overcurrent failure thresholds for all current sensors in the enclosure. Sensors are numbered as in CurSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.50 |
enclCurSensorsOverCurWarnThrThe list of overcurrent warning thresholds for all current sensors in the enclosure. Sensors are numbered as in CurSensorsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.51 |
enclSASConnectMaximumThe number of possible SAS connectors monitored by this enclosure.ro Integer32 .1.3.6.1.4.1.789.1.21.1.2.1.52 |
enclSASConnectPresentThe list of SAS connector numbers in this enclosure that have cables attached. Connectors are numbered beginning at one on module one, counting connectors innermost-to-outermost on the module, then module two innermost-to-outermost. Modules are numbered as in enclElectronicsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.53 |
enclSASConnectVendorThe list of vendors of cables attached to the SES connectors of the enclosure. If no cable, is attached, the entry is shown as <N/A>.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.54 |
enclSASConnectTypeThe list of connector types of connectors attached to the enclosure. If no cable is attached, the entry is shown as <N/A>.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.55 |
enclSASConnectCableLenThe list of lengths (in meters) of cables attached to the the enclosure. If no cable is attached, the entry is shown as <N/A>.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.56 |
enclSASConnectCableTechThe list of cable technologies of connectors attached to the enclosure. If no cable is attached, the entry is shown as <N/A>.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.57 |
enclSASConnectCableEndThe list of identifiers of which end of the cable is attached to the enclosure. If no cable is attached, the entry is shown as <N/A>.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.58 |
enclSASConnectSerialNosThe list of serial numbers of the SAS cables attached to this enclosure. If no cable is attached, the entry is shown as <N/A>.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.59 |
enclSASConnectPartNosThe list of part numbers of the SAS cables attached to this enclosure. If no cable is attached, the entry is shown as <N/A>.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.60 |
enclPowerSuppliesPartNosThe list of part numbers of power supplies present in the enclosure. Not all shelves are able to report the power supply part number. Communication errors may make the part number unavailable. The order follows that of enclPowerSuppliesPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.61 |
enclFansSpeedThe list of fan speeds in revolutons per minute (RPM) for fans or fan modules present and for which speed status is known in this enclosure. Not all enclosure types report fan speeds. Fans are numbered as described in enclFansPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.62 |
enclElectronicsPartNosThe list of part numbers of the enclosure services electronics modules present in this enclosure. The order follows that of enclElectronicsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.63 |
enclElectronicsCPLDVersThe list of CPLDs ('complex programmable logic devices') of the enclosure services electronics modules present in this enclosure. Not all module types contain this part. The order follows that of enclElectronicsPresent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.64 |
enclNodeNameNode to which this enclosure belongs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.1.2.1.65 |
haTableHigh Availability configuration information table. This table fields are returned only from the cluster interfaces SEQUENCE OF HaEntry .1.3.6.1.4.1.789.1.21.2 |
haEntryHigh Availability Entry HaEntry .1.3.6.1.4.1.789.1.21.2.1 |
haNodeNameName of the node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.2.1.1 |
haNodeSysidSystem ID of the node.ro Unsigned32 .1.3.6.1.4.1.789.1.21.2.1.2 |
haSettingsHigh Availability configuration settings. The value notConfigured(1) indicates that the HA is not licensed. The thisNodeDead(5) setting indicates that this node has been takenover.ro Enumeration .1.3.6.1.4.1.789.1.21.2.1.3 |
haStateHigh Availability State.ro Enumeration .1.3.6.1.4.1.789.1.21.2.1.4 |
haCannotTakeoverCauseThe reason node cannot takeover its HA partnerro Enumeration .1.3.6.1.4.1.789.1.21.2.1.5 |
haPartnerStatusThis is the status last returned by its HA partner.ro Enumeration .1.3.6.1.4.1.789.1.21.2.1.6 |
haPartnerLastStatusUpdateIf non-zero, the absolute time of the last update from the partner.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.789.1.21.2.1.7 |
haPartnerNameHostname of partner.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.21.2.1.8 |
haPartnerSysidSystem ID of partner.ro Unsigned32 .1.3.6.1.4.1.789.1.21.2.1.9 |
haInterconnectStatusThe current status of the interconnect. The partialFailure(3) status indicates that one of the links in the interconnect hardware is down.ro Enumeration .1.3.6.1.4.1.789.1.21.2.1.10 |
network OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.22 |
netInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.22.1 |
netifNumberThe number of network interfaces (regardless of their current state) present on this system.ro Integer32 .1.3.6.1.4.1.789.1.22.1.1 |
netifTableA list of interface entries. The number of entries is given by the value of netifNumber. SEQUENCE OF NetIfEntry .1.3.6.1.4.1.789.1.22.1.2 |
netifEntryAn interface entry containing objects at the subnetwork layer and below for a particular interface. NetIfEntry .1.3.6.1.4.1.789.1.22.1.2.1 |
netifIndexA unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.ro Integer32 .1.3.6.1.4.1.789.1.22.1.2.1.1 |
netifDescrA textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.ro DisplayString .1.3.6.1.4.1.789.1.22.1.2.1.2 |
ifHighInOctetsThe total number of octets received on the interface, including framing characters. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64InOctets instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.3 |
ifLowInOctetsThe total number of octets received on the interface, including framing characters. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64InOctets instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.4 |
ifHighInUcastPktsThe number of subnetwork-unicast packets delivered to a higher-layer protocol. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64InUcastPkts instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.5 |
ifLowInUcastPktsThe number of subnetwork-unicast packets delivered to a higher-layer protocol. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64InUcastPkts instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.6 |
ifHighInNUcastPktsThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64InNUcastPkts instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.7 |
ifLowInNUcastPktsThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64InNUcastPkts instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.8 |
ifHighInDiscardsThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64InDiscards instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.9 |
ifLowInDiscardsThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64InDiscards instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.10 |
ifHighInErrorsThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64InErrors instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.11 |
ifLowInErrorsThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64InErrors instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.12 |
ifHighInUnknownProtosThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64InUnknownProtos instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.13 |
ifLowInUnknownProtosThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64InUnknownProtos instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.14 |
ifHighOutOctetsThe total number of octets transmitted out of the interface, including framing characters. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64OutOctets instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.15 |
ifLowOutOctetsThe total number of octets transmitted out of the interface, including framing characters. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64OutOctets instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.16 |
ifHighOutUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64OutUcastPkts instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.17 |
ifLowOutUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64OutUcastPkts instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.18 |
ifHighOutNUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64OutNUcastPkts instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.19 |
ifLowOutNUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64OutNUcastPkts instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.20 |
ifHighOutDiscardsThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64OutDiscards instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.21 |
ifLowOutDiscardsThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64OutDiscards instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.22 |
ifHighOutErrorsThe number of outbound packets that could not be transmitted because of errors. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64OutErrors instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.23 |
ifLowOutErrorsThe number of outbound packets that could not be transmitted because of errors. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use if64OutErrors instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.22.1.2.1.24 |
if64InOctetsThe total number of octets received on the interface, including framing characters. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.22.1.2.1.25 |
if64InUcastPktsThe number of subnetwork-unicast packets delivered to a higher-layer protocol. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.22.1.2.1.26 |
if64InNUcastPktsThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.22.1.2.1.27 |
if64InDiscardsThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.22.1.2.1.28 |
if64InErrorsThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.22.1.2.1.29 |
if64InUnknownProtosThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.22.1.2.1.30 |
if64OutOctetsThe total number of octets transmitted out of the interface, including framing characters. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.22.1.2.1.31 |
if64OutUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.22.1.2.1.32 |
if64OutNUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.22.1.2.1.33 |
if64OutDiscardsThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.22.1.2.1.34 |
if64OutErrorsThe number of outbound packets that could not be transmitted because of errors. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.22.1.2.1.35 |
netportTableA list of network ports (both physical and logical) on all nodes in the cluster. SEQUENCE OF NetportEntry .1.3.6.1.4.1.789.1.22.2 |
netportEntryNetwork port entry. NetportEntry .1.3.6.1.4.1.789.1.22.2.1 |
netportNodeNode where the port belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.2.1.1 |
netportPortPort identity.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.2.1.2 |
netportRoleRole of the port. A port must have one of the following roles: cluster(1), data(2), mgmt(3), intercluster(4), cluster-mgmt(5) or undef(0). The cluster port is used to communicate to other node(s) in the cluster. The data port services clients' requests. It is where all the file requests come in. The management port is used by administrator to manage resources within a node. The intercluster port is used to communicate to other cluser. The cluster-mgmt port is used to manage resources within the cluster. The undef role is for the port that has not yet been assigned a role.ro Enumeration .1.3.6.1.4.1.789.1.22.2.1.3 |
netportLinkStateThe link-state of the port. Normally it is either UP(2) or DOWN(3).ro Enumeration .1.3.6.1.4.1.789.1.22.2.1.4 |
netportMtuThe Maximum Transmission Unit (MTU) refers to the size (in bytes) of the largest packet that is supported by the port.ro INTEGER .1.3.6.1.4.1.789.1.22.2.1.5 |
netportAutonegAdminIndicates whether the port's auto-negotiation property is enabled by an administrator.ro Boolean .1.3.6.1.4.1.789.1.22.2.1.6 |
netportAutonegOperIndicates whether the auto-negotiation is enabled on the port.ro Boolean .1.3.6.1.4.1.789.1.22.2.1.7 |
netportDuplexAdminThe duplex mode of the port set by the administrator. It can be either undef(0), auto(1), half-duplex(2), or full-duplex(3).ro Enumeration .1.3.6.1.4.1.789.1.22.2.1.8 |
netportDuplexOperThe duplex mode appears on the port. It can be either undef(0), auto(1), half-duplex(2), or full-duplex(3).ro Enumeration .1.3.6.1.4.1.789.1.22.2.1.9 |
netportSpeedAdminThe speed of the port set by an adminstrator. It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or ten Gb/s(5).ro Enumeration .1.3.6.1.4.1.789.1.22.2.1.10 |
netportSpeedOperThe speed appears on the port. It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or ten Gb/s(5).ro Enumeration .1.3.6.1.4.1.789.1.22.2.1.11 |
netportSpeedThe speed that appears in the port scaled to megabits/sec.ro INTEGER .1.3.6.1.4.1.789.1.22.2.1.12 |
netportMacThe port's MAC addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.2.1.13 |
netportUpAdminIndicates whether the port status is set 'UP' by an adminstrator.ro Boolean .1.3.6.1.4.1.789.1.22.2.1.14 |
netportTypeThe type of the port which can be either physical(0), if-group(1), vlan(2) or undef(3).ro Enumeration .1.3.6.1.4.1.789.1.22.2.1.15 |
netportIfgNodeThis field shows the if-group node name if the port type is if-group, It show an empty string, otherwise.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.2.1.16 |
netportIfgPortThis field shows the if-group port if the port type is if-group, It show an empty string, otherwise.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.2.1.17 |
netportIfgDistrFuncIf the port type is if-group, this field shows the distribution function of the port. This function is used to pick the forwarding port for a packet. It can be either mac(0), ip(1), or sequential(2). The mac function selects the port based on the hash of the MAC address of the destination. Instead of MAC address, the ip function uses the destination's IP address. The sequential function uses the round-robin port selection.ro Enumeration .1.3.6.1.4.1.789.1.22.2.1.18 |
netportIfgModeIf the port type is if-group, this field shows the if-group's policy. It can be either multimode(0), multimode-lacp(1), or single-mode(2). Otherwise, it shows an empty string. The multimode policy uses the static link-aggregation, while the multimode-lacp uses the link-aggregation with lacp (Link Aggregate Control Protocol). The single mode does not use link-aggregation.ro Enumeration .1.3.6.1.4.1.789.1.22.2.1.19 |
netportVlanNodeIf the port type is vlan, this field shows its vlan node. Otherwise, it shows an empty string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.2.1.20 |
netportVlanPortIf the port type is vlan, this field shows its vlan port. Otherwise, it shows an empty string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.2.1.21 |
netportVlanTagIf the port type is vlan, this field shows its vlan tag. Otherwise, it shows an empty string.ro INTEGER .1.3.6.1.4.1.789.1.22.2.1.22 |
netportFlowcontrolAdminThe flowcontrol of the port set by an adminstrator. It can be either undef(0), none(1), receive(2), send(3), or full(4).ro Enumeration .1.3.6.1.4.1.789.1.22.2.1.23 |
netportFlowcontrolOperThe flowcontrol that appears on the port. It can be either undef(0), none(1), receive(2), send(3), or full(4).ro Enumeration .1.3.6.1.4.1.789.1.22.2.1.24 |
netportAutorevertDelayIf the port is designated as a cluster port, this field shows the delay in seconds before autoreverting a LIF to this port. otherwise, it shows an empty string.ro INTEGER .1.3.6.1.4.1.789.1.22.2.1.25 |
netportRemoteDeviceIdRemote device ID discovered by L2 protocol.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.2.1.26 |
netportIfGrpTableA table of if-groups, where each entry represents an interface of the group. SEQUENCE OF NetportIfGrpEntry .1.3.6.1.4.1.789.1.22.3 |
netportIfGrpEntryIf-group entry. NetportIfGrpEntry .1.3.6.1.4.1.789.1.22.3.1 |
netportIfGrpNodeThe node that the If-group belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.3.1.1 |
netportIfGrpNameThe name of the if-group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.3.1.2 |
netportIfGrpDistrFuncThe distribute function of the if-group. This function is used to pick the forwarding port for a packet. It can be either mac(0), ip(1), or sequential(2). The mac function selects the port based on the hash of the MAC address of the destination. Instead of MAC address, the ip function uses IP address. The sequential function uses the round-robin port selection.ro Enumeration .1.3.6.1.4.1.789.1.22.3.1.3 |
netportIfGrpModeThe policy of the if-group. It can be either multimode(0), multimode-lacp(1), or single-mode(2). The multimode policy uses the static link-aggregation, while the multimode-lacp uses the link-aggregation with lacp (Link Aggregate Control Protocol). The single mode does not use link-aggregation.ro Enumeration .1.3.6.1.4.1.789.1.22.3.1.4 |
netportIfGrpMacThe MAC address of the if-group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.3.1.5 |
netportIfGrpActivePortsThe participation of the network ports in the if-group. It can be full, partial, and none.ro Enumeration .1.3.6.1.4.1.789.1.22.3.1.6 |
netportIfGrpPortsA list of network ports that participate in the if-group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.3.1.7 |
netportIfGrpUpPortsA list of network ports that are 'UP' in the if-group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.3.1.8 |
netportIfGrpDownPortsA list of network ports that are 'DOWN' in the if-group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.3.1.9 |
logicalInterfaceTableA list of logical interface entries. SEQUENCE OF LogicalInterfaceEntry .1.3.6.1.4.1.789.1.22.4 |
logicalInterfaceEntryLogical interface entry. LogicalInterfaceEntry .1.3.6.1.4.1.789.1.22.4.1 |
logicalInterfaceServerThe node where the logical interface belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.4.1.1 |
logicalInterfaceVifThe name of the logical interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.4.1.2 |
logicalInterfaceRoleThe role of logical interface. An interface can have one of the following roles: undef(0), cluster(1), data(2), mgmt(3), intercluster(4), and cluster-mgmt(5). The cluster interface is used to communicate to other node(s) in the cluster. The data interface services external clients where all the file requests come in. The management interface is used by administrator to manage resources within a node. The intercluster interface is used to communicate to other cluser. The cluster-mgmt port is used to manage resources within the cluster. The undef role is for the interface that has not yet been assigned a role.ro Enumeration .1.3.6.1.4.1.789.1.22.4.1.3 |
logicalInterfaceHomeNodeThe home node of the interface where the interface is initially setup.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.4.1.4 |
logicalInterfaceHomePortThe home port of the interface where the interface is initially setup.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.4.1.5 |
logicalInterfaceCurrNodeThe node where the interface is currently on.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.4.1.6 |
logicalInterfaceCurrPortThe port where the interface is currently attached to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.4.1.7 |
logicalInterfaceStatusOperThe operational status, which can be UP(0) or DOWN(1).ro Enumeration .1.3.6.1.4.1.789.1.22.4.1.8 |
logicalInterfaceNumericIdThe interface ID.ro INTEGER .1.3.6.1.4.1.789.1.22.4.1.9 |
logicalInterfaceIsHomeIndicates whether the interface is at the home node.ro Boolean .1.3.6.1.4.1.789.1.22.4.1.10 |
logicalInterfaceAddressThe IP address assigned to the interface.ro IpAddress .1.3.6.1.4.1.789.1.22.4.1.11 |
logicalInterfaceNetmaskThe netmask assigned to the interface.ro IpAddress .1.3.6.1.4.1.789.1.22.4.1.12 |
logicalInterfaceNetmaskLengthThe number of set bits of the netmask.ro INTEGER .1.3.6.1.4.1.789.1.22.4.1.13 |
logicalInterfaceRoutingGroupThe interface's routing group namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.4.1.14 |
logicalInterfaceStatusAdminThe status of the interface assigned by an administrator. It can be either UP(0) or DOWN(1).ro Enumeration .1.3.6.1.4.1.789.1.22.4.1.15 |
logicalInterfaceFailoverPolicyThe interface's failover policy. It can be next-available(0), where the interface will failover to any next available interface, priority(1), where the interface will failover to the interface that has the highest priority, or disabled(2).ro Enumeration .1.3.6.1.4.1.789.1.22.4.1.16 |
logicalInterfaceFirewallPolicyThe firewall policy of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.4.1.17 |
logicalInterfaceAutoRevertIndicates whether the auto-revert property of the interface is set. If the value is 'true', the interface will automatically revert back to the home port whenever the interface is not on the home port and the home port becomes operational.ro Boolean .1.3.6.1.4.1.789.1.22.4.1.18 |
logicalInterfaceStickyIndicates whethere the sticky bit is set. It is the readonly field that is set by the system. When it is set, the interface's auto-revert is disabled. It is set when the interface is migrated manually, so that it will not auto-revert to the home port.ro Boolean .1.3.6.1.4.1.789.1.22.4.1.19 |
logicalInterfaceUseFailoverGroupThe field identifies whether the interface's failover is system-defined(0), set to 'enabled'(1) or 'disable'(2).ro Enumeration .1.3.6.1.4.1.789.1.22.4.1.20 |
logicalInterfaceDnsZoneThe interface's DNS Zonero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.4.1.21 |
logicalInterfaceAllowLbMigrateIndicates whether the load balancing migration is enabled for the interface.ro Boolean .1.3.6.1.4.1.789.1.22.4.1.22 |
logicalInterfaceLbWeightThe load balancing weight of the interface. It can be either minimum (0), maximum(100), or load(101).ro Enumeration .1.3.6.1.4.1.789.1.22.4.1.23 |
logicalInterfaceFailoverGroupThe interface failover group's name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.4.1.24 |
logicalInterfaceStatusVserverThe status of the interface with respect to it's Vserver. It can be either UP(0) or DOWN(1).ro Enumeration .1.3.6.1.4.1.789.1.22.4.1.25 |
logicalInterfaceDataProtocolA list of data protocols.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.4.1.26 |
logicalInterfaceFcpWwpnThe WWPN of a FCP data LIF.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.4.1.27 |
logicalInterfaceCommentA comment to further identify a LIF.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.22.4.1.28 |
logicalInterfaceListenForDnsQueryIndicates whether the LIF has to listen for DNS queries for load-balancing.ro Boolean .1.3.6.1.4.1.789.1.22.4.1.29 |
netOpts OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.22.5 |
netOptsv6Table OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.22.5.1 |
netOptsv6EnabledIndicates whether the cluster supports IPv6.ro Boolean .1.3.6.1.4.1.789.1.22.5.1.1 |
netOptsSwitchlessCluster OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.22.5.2 |
netOptsSwitchlessClusterEnabledIndicates whether the cluster network is switchless.ro Boolean .1.3.6.1.4.1.789.1.22.5.2.1 |
sis OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.23 |
sisIsLicensedIndicates whether Advanced SIS is licensed on the filer.ro Enumeration .1.3.6.1.4.1.789.1.23.1 |
sisTableProvide a list of the SIS volumes on the system. SEQUENCE OF SisEntry .1.3.6.1.4.1.789.1.23.2 |
sisEntryProvide details about a particular SIS volume. For entries returned only from the cluster interfaces, the value of sisRowAvailable needs to be 1, for the contents of the row to be valid. SisEntry .1.3.6.1.4.1.789.1.23.2.1 |
sisIndexA number that identifies this entry for the SIS volume.ro Integer32 .1.3.6.1.4.1.789.1.23.2.1.1 |
sisPathThe path to the SIS volume.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.23.2.1.2 |
sisStateIndicates whether SIS is enabled on the volume or not.ro Enumeration .1.3.6.1.4.1.789.1.23.2.1.3 |
sisStatusCurrent status of the SIS volume.ro Enumeration .1.3.6.1.4.1.789.1.23.2.1.4 |
sisProgressThe progress of the current SIS operation.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.23.2.1.5 |
sisTypeIndicates whether it is a regular or snapvaulted SIS volume.ro Enumeration .1.3.6.1.4.1.789.1.23.2.1.6 |
sisScheduleThe schedule for the SIS operations.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.23.2.1.7 |
sisLastOpBeginTimeThe starting time of the last completed SIS operation.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.23.2.1.8 |
sisLastOpEndTimeThe ending time of the last completed SIS operation.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.23.2.1.9 |
sisHighLastOpSizeThe total amount of data in KBytes that the last completed SIS operation had processed. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use sis64LastOpSize instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.23.2.1.10 |
sisLowLastOpSizeThe total amount of data in KBytes that the last completed SIS operation had processed. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use sis64LastOpSize instead.rodeprecated Integer32 .1.3.6.1.4.1.789.1.23.2.1.11 |
sisLastOpErrorThe error that the last SIS operation encountered if it failed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.23.2.1.12 |
sis64LastOpSizeThe total amount of data in KBytes that the last completed SIS operation had processed. This object returns all of the 64 bit unsigned integer.ro Counter64 .1.3.6.1.4.1.789.1.23.2.1.13 |
sisIsCompressionEnabledIndicates whether background compression is enabled on the volume or not.ro Boolean .1.3.6.1.4.1.789.1.23.2.1.14 |
sisIsInlineEnabledIndicates whether inline compression is enabled on the volume or notro Boolean .1.3.6.1.4.1.789.1.23.2.1.15 |
sisVserverVserver owning the Storage efficiency volume. This entry is only available from the cluster interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.23.2.1.16 |
sisPolicyStorage efficiency policy name set on the volume. This entry is only available from the cluster interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.23.2.1.17 |
sisRowAvailableIndicates if other fields in this entry are available. This field is returned only from the cluster interfaces. If something goes wrong while fetching the values for fields in this table, the values returned may not be valid. The volume returned may not be a SIS volume. For fields that could not be fetched, default values are set. For integers it is -1, for counters 0, and for string it is null.ro Boolean .1.3.6.1.4.1.789.1.23.2.1.18 |
sisMinBlocksSharedThe minimum number of contiguous blocks in a file that will be considered for block sharing. If the number of contiguous duplicate blocks is less than this number, then they won't be considered for sharing.ro Integer32 .1.3.6.1.4.1.789.1.23.2.1.19 |
sisBlocksSkippedSharingNumber of blocks not considered for sharing because contiguous duplicate blocks were less than the value set for sisMinBlocksShared.ro Counter32 .1.3.6.1.4.1.789.1.23.2.1.20 |
sisChangelogUsedPercentPercentage of changelog used.ro Integer32 .1.3.6.1.4.1.789.1.23.2.1.21 |
sisLastSuccessfulOpBeginTimeThe starting time of the last successful SIS operation.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.23.2.1.22 |
sisLastSuccessfulOpEndTimeThe ending time of the last successful SIS operation.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.23.2.1.23 |
sisLastOpStateThe state of the last SIS operation.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.23.2.1.24 |
sisLogicalSizeThe size of logical data in the volume in bytes. This may be calculated approximately using these fields in dfTable MIB [df64DedupeSaved + df64CompressSaved + df64SisSharedKBytes * 1024].ro Counter64 .1.3.6.1.4.1.789.1.23.2.1.25 |
sisLogicalLimitIndicates SIS logical limit for the volume. It is equal to WAFL maximum nominal size of 64bit volume.ro Counter64 .1.3.6.1.4.1.789.1.23.2.1.26 |
sisQueuedJobIndicates type of sis operation that is queued for the volume. Possible values: 'scan', 'start', 'check', 'downgrade'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.23.2.1.27 |
sisStaleFpPercentageIndicates percentage of fingerprints that are stale in the fingerprint database. It can be more than 100%, if blocks are overwritten or deleted.ro Integer32 .1.3.6.1.4.1.789.1.23.2.1.28 |
sisIsIddEnabledIndicates Incompressible data detection is enabled on compressed volume.ro Boolean .1.3.6.1.4.1.789.1.23.2.1.29 |
sisQuickCheckFsizeCompression quick check file size. If Incompressible data detection is enabled and if the file size is >= quick-check-fsize, inline compression will do a 4k quick check before doing full CG compression.ro Counter64 .1.3.6.1.4.1.789.1.23.2.1.30 |
sisIsConstituentIndicates whether the volume is a constituent or not.ro Boolean .1.3.6.1.4.1.789.1.23.2.1.31 |
compress OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.24 |
compressIsLicensedIndicates whether compression is licensed on the filer.rodeprecated Enumeration .1.3.6.1.4.1.789.1.24.1 |
compressTableProvide a report of the total space used as well as the space saved by compression on volumes.deprecated SEQUENCE OF CompressEntry .1.3.6.1.4.1.789.1.24.2 |
compressEntryProvide a report of the total space used as well as the space saved by compression on the referenced file system.deprecated CompressEntry .1.3.6.1.4.1.789.1.24.2.1 |
compressIndexA number that identifies this entry for the referenced file system.rodeprecated Integer32 .1.3.6.1.4.1.789.1.24.2.1.1 |
compressFileSysThe name for the referenced file system.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.24.2.1.2 |
compressHighUsedKBytesThe total disk space in KBytes that is in use on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use compress64UsedKBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.24.2.1.3 |
compressLowUsedKBytesThe total disk space in KBytes that is in use on the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use compress64UsedKBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.24.2.1.4 |
compress64UsedKBytesThe total disk space in KBytes that is in use on the referenced file system. This object returns all of the 64 bit unsigned integer.rodeprecated Counter64 .1.3.6.1.4.1.789.1.24.2.1.5 |
compressHighSavedKBytesThe disk space in KBytes of disk space that is saved by compression on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use compress64SavedKBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.24.2.1.6 |
compressLowSavedKBytesThe disk space in KBytes of disk space that is saved by compression on the referenced filesystem. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use compress64SavedKBytes instead.rodeprecated Counter32 .1.3.6.1.4.1.789.1.24.2.1.7 |
compress64SavedKBytesThe disk space in KBytes of disk space that is saved by compression on the referenced filesystem. This object returns all of the 64 bit unsigned integer.rodeprecated Counter64 .1.3.6.1.4.1.789.1.24.2.1.8 |
compressPercentSavedThe percentage of disk space saved by compression on the referenced filesystem.rodeprecated INTEGER .1.3.6.1.4.1.789.1.24.2.1.9 |
cluster OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.25 |
clusterIdentity OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.25.1 |
clusterIdentityUuidCluster's universally unique identifier (UUID).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.1.1 |
clusterIdentityNameName of the cluster of which this node is a member.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.1.2 |
clusterIdentitySerialNumberCluster Serial Numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.1.3 |
nodeTableTable of all nodes in the cluster. SEQUENCE OF NodeEntry .1.3.6.1.4.1.789.1.25.2 |
nodeEntryEntry for a node in the cluster. NodeEntry .1.3.6.1.4.1.789.1.25.2.1 |
nodeNameNode Name. Same as sysName for a specific node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.2.1.1 |
nodeOwnerNode Owner. Same as sysContact for a specific node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.2.1.2 |
nodeLocationNode Location. Same as sysLocation for a specific node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.2.1.3 |
nodeModelNode Model. Same as productModel for a specific node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.2.1.4 |
nodeSerialNumberNode Serial Number. Same as productSerialNum for a specific node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.2.1.5 |
nodeAssetTagValue of customer-assigned asset tag for this node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.2.1.6 |
nodeUptimeNode Uptime. Same as sysUpTime for a specific node.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.789.1.25.2.1.7 |
nodeNvramIdNVRAM ID of this node.ro INTEGER .1.3.6.1.4.1.789.1.25.2.1.8 |
nodeSystemIdNode System ID. Same as productId for a specific node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.2.1.9 |
nodeVendorNode Vendor. Similar to productVendor for a specific node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.2.1.10 |
nodeHealthWhether or not the node can communicate with the cluster.ro Boolean .1.3.6.1.4.1.789.1.25.2.1.11 |
nodeEligibilityAn eligible node is one that has been designated by the administrator as an active participant in the cluster.ro Boolean .1.3.6.1.4.1.789.1.25.2.1.12 |
nodeEpsilonWhether or not this node has epsilon to keep the quorum up if only half of the nodes can communicate.ro Boolean .1.3.6.1.4.1.789.1.25.2.1.13 |
nodeUuidUniversally unique identifier (UUID) of the node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.2.1.14 |
nodeCpuUptimeThe time (in hundredths of a second) that the CPU has been up since the last boot.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.789.1.25.2.1.15 |
nodeCpuBusyTimeThe time (in hundredths of a second) that the CPU has been doing useful work since the last boot.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.789.1.25.2.1.16 |
nodeNvramBatteryStatusAn indication of the current status of the NVRAM battery or batteries. Batteries which are fully or partially discharged may not fully protect the system during a crash. The end-of-life status values are based on the manufacturer's recommended life for the batteries.ro Enumeration .1.3.6.1.4.1.789.1.25.2.1.17 |
nodeEnvOverTemperatureAn indication of whether the hardware is currently operating outside of its recommended temperature range. The hardware will shutdown if the temperature exceeds critical thresholds.ro Enumeration .1.3.6.1.4.1.789.1.25.2.1.18 |
nodeEnvFailedFanCountCount of the number of chassis fans which are not operating within the recommended RPM range.ro INTEGER .1.3.6.1.4.1.789.1.25.2.1.19 |
nodeEnvFailedFanMessageText message describing the current condition of chassis fans. This is useful only if envFailedFanCount is not zero.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.2.1.20 |
nodeEnvFailedPowerSupplyCountCount of the number of power supplies which are in degraded mode.ro INTEGER .1.3.6.1.4.1.789.1.25.2.1.21 |
nodeEnvFailedPowerSupplyMessageText message describing the state of any power supplies which are currently degraded. This is useful only if envFailedPowerSupplyCount is not zero.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.2.1.22 |
nodeProductVersionNode Product Version. Similar to productVersion for a specific node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.2.1.23 |
nodeFirmwareVersionNode Firmware Version. Similar to productFirmwareVersion for a specific node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.2.1.24 |
clusterLicenseTableCluster Licensesdeprecated SEQUENCE OF ClusterLicenseEntry .1.3.6.1.4.1.789.1.25.3 |
clusterLicenseEntryDetails about each installed cluster license.deprecated ClusterLicenseEntry .1.3.6.1.4.1.789.1.25.3.1 |
clusterLicenseFeatureCluster license feature ID, see clusterLicenseDescription for the name/description of this featurerodeprecated Integer32 .1.3.6.1.4.1.789.1.25.3.1.1 |
clusterLicenseCodeCluster License Coderodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.3.1.2 |
clusterLicenseDescriptionCluster License Feature Descriptionrodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.3.1.3 |
clusterLicenseSerialNumberCluster Serial Numberrodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.3.1.4 |
clusterLicenseLimitCluster feature limit value. The units of this value are feature specific, for example number of nodes, capacity in TB, number of streams, etc. Information about this limit will be in the clusterLicenseDescription.rodeprecated Integer32 .1.3.6.1.4.1.789.1.25.3.1.5 |
clusterLicenseExpirationDateCluster License Expiration Date if it existsrodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.3.1.6 |
licenseTableLicenses SEQUENCE OF LicenseEntry .1.3.6.1.4.1.789.1.25.4 |
licenseEntryDetails about each installed license. LicenseEntry .1.3.6.1.4.1.789.1.25.4.1 |
licenseSerialNumberLicense Serial Numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.4.1.1 |
licensePackageLicense package ID, see licenseDescription for the name/description of this packagero Integer32 .1.3.6.1.4.1.789.1.25.4.1.2 |
licenseOwnerName of the Node or Cluster that the license belongs toro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.4.1.3 |
licenseDescriptionLicense Package Descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.4.1.4 |
licenseTypeLicense Typero Enumeration .1.3.6.1.4.1.789.1.25.4.1.5 |
licenseExpirationLicense Expiration Date if it existsro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.4.1.6 |
licenseLegacyIndicates if the license is a Legacy Licensero Enumeration .1.3.6.1.4.1.789.1.25.4.1.7 |
licenseCustomerIDCustomer Identification Number, if existsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.25.4.1.8 |
extcache OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.26 |
extcacheTypeIndicates the type of external cache being used. Examples are none, PCS, IOMEM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.26.1 |
extcacheSubTypeIndicates the sub-type of external cache being used. Examples are none, PAM1, PAM2.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.26.2 |
extcache64UptimeIndicates the uptime of the external cache.ro Counter64 .1.3.6.1.4.1.789.1.26.3 |
extcache64SizeIndicates size of the external cache in bytes.ro Counter64 .1.3.6.1.4.1.789.1.26.4 |
extcache64UsedsizeIndicates number of bytes used in the external cache.ro Counter64 .1.3.6.1.4.1.789.1.26.5 |
extcache64TotalBuffersIndicates total number of 4k blocks in the external cache.ro Counter64 .1.3.6.1.4.1.789.1.26.6 |
extcacheOptionsIndicates external cache options that are currently turned on.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.26.7 |
extcache64HitsIndicates number of wafl buffers read from the external cachero Counter64 .1.3.6.1.4.1.789.1.26.8 |
extcache64MissesIndicates the number of external cache missesro Counter64 .1.3.6.1.4.1.789.1.26.9 |
extcache64InsertsIndicates number of wafl buffers inserted into the external cachero Counter64 .1.3.6.1.4.1.789.1.26.10 |
extcache64EvictsIndicates the number of buffers evicted from the external cachero Counter64 .1.3.6.1.4.1.789.1.26.11 |
extcache64InvalidatesIndicates the number of buffers invalidated in the external cachero Counter64 .1.3.6.1.4.1.789.1.26.12 |
extcache64BlocksRef0Indicates the number of non-referenced buffers currently in the external cachero Counter64 .1.3.6.1.4.1.789.1.26.13 |
extcache64HitNormalL0Indicates the number of L0 buffers read from the external cachero Counter64 .1.3.6.1.4.1.789.1.26.14 |
extcache64MetaDataIndicates the number of metadata buffers read from the external cachero Counter64 .1.3.6.1.4.1.789.1.26.15 |
extcache64ReadLatencyIndicates the average latency of read IOs in the external cache in millisecondsro Counter64 .1.3.6.1.4.1.789.1.26.16 |
extcache64WriteLatencyIndicates the average latency of write IOs in the external cache in millisecondsro Counter64 .1.3.6.1.4.1.789.1.26.17 |
extcache64RCLengthIndicates the average read chain length in the external cachero Counter64 .1.3.6.1.4.1.789.1.26.18 |
extcache64WCLengthIndicates the average write chain length in the external cachero Counter64 .1.3.6.1.4.1.789.1.26.19 |
extcacheIsFlexShareOnIndicates whether FlexShare is onro Enumeration .1.3.6.1.4.1.789.1.26.20 |
vserver OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.27 |
vserverTableVirtual Server Table SEQUENCE OF VserverEntry .1.3.6.1.4.1.789.1.27.1 |
vserverEntryVirtual Server Entry VserverEntry .1.3.6.1.4.1.789.1.27.1.1 |
vserverIndexIndex of virtual server. Unsigned32 .1.3.6.1.4.1.789.1.27.1.1.1 |
vserverNameName of virtual server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.27.1.1.2 |
vserverUuidUniversally unique identifier (UUID) of virtual server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.27.1.1.3 |
vserverRootVolumeVirtual server's root volumero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.27.1.1.4 |
vserverAggregateName of aggregate the vserver's root volume is in.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.27.1.1.5 |
vserverNsSwitchVserver Name Service Switch setting (eg: nis, ldap, file).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.27.1.1.6 |
vserverNisDomainVserver NIS Domainro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.27.1.1.7 |
vserverRootVolumeSecurityStyleVserver Root Volume Security Stylero Enumeration .1.3.6.1.4.1.789.1.27.1.1.8 |
vserverLdapClientVserver LDAP Clientro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.27.1.1.9 |
vserverLanguageLanguage of this vserver's volumes. For example, 'English'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.27.1.1.10 |
vserverSnapshotPolicyVserver Default Snapshot Policyro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.27.1.1.11 |
vserverCommentCustomer assigned comment for this vserverro DisplayString .1.3.6.1.4.1.789.1.27.1.1.12 |
vserverAntiVirusOnAccessPolicyVserver Default Anti-Virus On-Access Policyro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.27.1.1.13 |
vserverQuotaPolicyQuota Policy assigned for all volumes in this vserverro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.27.1.1.14 |
vserverTypeType of the vserver. There are three distinct supported types: admin, node, and data. 'data' vservers are the default scale-out vservers. One 'admin' vserver exists per cluster and it provides universal administrative access to the cluster. One 'node' vserver exists per node in the cluster and identifies the physical controller.ro Enumeration .1.3.6.1.4.1.789.1.27.1.1.15 |
vserverStateState of the vserverro Enumeration .1.3.6.1.4.1.789.1.27.1.1.16 |
vserverAggrListThis is a comma-separated list of aggregates on which the Vserver can perform volume operations. The aggregates may be shared for use with other Vservers.ro OCTET STRING .1.3.6.1.4.1.789.1.27.1.1.17 |
vserverAllowedProtocolListThis is a comma-separated list of protocols/services allowed to run on the Vserver. Eg: NFS,CIFS,iSCSI,FCP.ro OCTET STRING .1.3.6.1.4.1.789.1.27.1.1.18 |
vserverNumVolumesNumber of volumes that are contained in the Vserver.ro Integer32 .1.3.6.1.4.1.789.1.27.1.1.19 |
vserverMaxVolumesMaximum number of volumes that can be created on the Vserver.ro Integer32 .1.3.6.1.4.1.789.1.27.1.1.20 |
vserverDisallowedProtocolListThis is a comma-separated list of protocols/services disallowed to run on the Vserver. Eg: NFS,CIFS,iSCSI,FCP.ro OCTET STRING .1.3.6.1.4.1.789.1.27.1.1.21 |
vserverIsRepositoryThis Vserver is a Vserver with Infinite Volume. A Vserver with Infinite Volume contains a single Infinite Volume.ro Boolean .1.3.6.1.4.1.789.1.27.1.1.22 |
qos OBJECT IDENTIFIER .1.3.6.1.4.1.789.1.28 |
qosWorkloadTableQoS Workload Table. SEQUENCE OF QosWorkloadEntry .1.3.6.1.4.1.789.1.28.1 |
qosWorkloadEntryEntry for a QoS Workload. QosWorkloadEntry .1.3.6.1.4.1.789.1.28.1.1 |
qosWorkloadUuidWorkload Uuidro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.1.1.1 |
qosWorkloadNameWorkload Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.1.1.2 |
qosWorkloadClassWorkload Classro Enumeration .1.3.6.1.4.1.789.1.28.1.1.3 |
qosWorkloadIdWorkload IDro Counter32 .1.3.6.1.4.1.789.1.28.1.1.4 |
qosWorkloadPolicyGroupPolicy Group Uuidro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.1.1.5 |
qosWorkloadVserverVserver IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.1.1.6 |
qosWorkloadVolumeVolume Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.1.1.7 |
qosWorkloadLunLUN Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.1.1.8 |
qosWorkloadFileFilenamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.1.1.9 |
qosWorkloadQtreeQtreero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.1.1.10 |
qosWorkloadReadAheadReadahead Tunablesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.1.1.11 |
qosWorkloadExtCacheExt Cache Tunablesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.1.1.12 |
qosPolicyGroupTableQoS Policy Group Table. SEQUENCE OF QosPolicyGroupEntry .1.3.6.1.4.1.789.1.28.2 |
qosPolicyGroupEntryEntry for a QoS Policy Group. QosPolicyGroupEntry .1.3.6.1.4.1.789.1.28.2.1 |
qosPolicyGroupUuidPolicy Group Uuidro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.2.1.1 |
qosPolicyGroupNamePolicy Group Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.2.1.2 |
qosPolicyGroupPgidPolicy Group IDro Counter32 .1.3.6.1.4.1.789.1.28.2.1.3 |
qosPolicyGroupClassPolicy Group Classro Enumeration .1.3.6.1.4.1.789.1.28.2.1.4 |
qosPolicyGroupMaxThroughputMaximum Throughputro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.2.1.5 |
qosPolicyGroupVserverVserver that the QoS Policy Group belongs toro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.2.1.6 |
qosReadaheadSettingsTableTable of QoS Read-Ahead Settings. SEQUENCE OF QosReadaheadSettingsEntry .1.3.6.1.4.1.789.1.28.3 |
qosReadaheadSettingsEntryEntry for a Read-Ahead Setting. QosReadaheadSettingsEntry .1.3.6.1.4.1.789.1.28.3.1 |
qosReadaheadSettingNameReadahead Setting Name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.789.1.28.3.1.1 |
qosReadaheadClassReadahead Setting Class.ro Enumeration .1.3.6.1.4.1.789.1.28.3.1.2 |
qosReadaheadDefaultIndicates if this is the default Read-Ahead Setting.ro Boolean .1.3.6.1.4.1.789.1.28.3.1.3 |
qosReadaheadMinBlocksMinimum Blocks to Speculate.ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.4 |
qosReadaheadMaxBlocksMaximum Blocks to Speculate.ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.5 |
qosReadaheadAlignBlocksBlock Alignment.ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.6 |
qosReadaheadMaxGapMaximum Speculative Blocks Outstanding.ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.7 |
qosReadaheadMaxRangeMaximum Range Used When Aging Streams (Blocks.ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.8 |
qosReadaheadMinRangeMinimum Range Used When Aging Streams (Blocks).ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.9 |
qosReadaheadMaxDeadlineMaximum Deadline Offset (ms).ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.10 |
qosReadaheadInterarrivalWeightWeight for Interarrival Time Aging (%).ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.11 |
qosReadaheadDiskResponseWeightWeight for Disk Response Time Aging (%).ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.12 |
qosReadaheadMinDiskResponseTimeMinimum Disk Response Time (ms).ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.13 |
qosReadaheadMaxDiskResponseTimeMaximum Disk Response Time (ms)..ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.14 |
qosReadaheadDiskResponseFactorDisk Response Time Factor.ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.15 |
qosReadaheadOvershootAllowable Overshoot (%).ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.16 |
qosReadaheadUseTimingUse Timing Algorithms.ro Boolean .1.3.6.1.4.1.789.1.28.3.1.17 |
qosReadaheadUseAsyncUse Asynchronous Speculation.ro Boolean .1.3.6.1.4.1.789.1.28.3.1.18 |
qosReadaheadMetadataDo Metadata Speculation.ro Boolean .1.3.6.1.4.1.789.1.28.3.1.19 |
qosReadaheadForceDumpForce DUMP-Style Readahead.ro Boolean .1.3.6.1.4.1.789.1.28.3.1.20 |
qosReadaheadForceFullForce Full-File Readahead.ro Boolean .1.3.6.1.4.1.789.1.28.3.1.21 |
qosReadaheadForceNoneDisable Readahead.ro Boolean .1.3.6.1.4.1.789.1.28.3.1.22 |
qosReadaheadUseFeedbackProvide Cache-Miss Feedback.ro Boolean .1.3.6.1.4.1.789.1.28.3.1.23 |
qosReadaheadSmallFileBlocksMaximum Blocks for Small-File Handling.ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.24 |
qosReadaheadMetadataBlocksMinimum Blocks for Which Metadata is Predicted.ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.25 |
qosReadaheadEarlyCountNumber of IO Operations Cautiously Predicted.ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.26 |
qosReadaheadJitterThreshold for Detecting Jitter (%).ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.27 |
qosReadaheadMinRetireTimeMinimum Time Before a Stream is Retired (us)ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.28 |
qosReadaheadMaxRetireTimeMaximum Time Before a Stream is Retired (us)ro Integer32 .1.3.6.1.4.1.789.1.28.3.1.29 |
qosReadaheadUseHistogramUse Histogram-based predictions.ro Boolean .1.3.6.1.4.1.789.1.28.3.1.30 |
netappProducts OBJECT IDENTIFIER .1.3.6.1.4.1.789.2 |
netappFiler OBJECT IDENTIFIER .1.3.6.1.4.1.789.2.1 |
netappNetCache OBJECT IDENTIFIER .1.3.6.1.4.1.789.2.2 |
netappClusteredFiler OBJECT IDENTIFIER .1.3.6.1.4.1.789.2.3 |
netappNode OBJECT IDENTIFIER .1.3.6.1.4.1.789.2.4 |
netappCluster OBJECT IDENTIFIER .1.3.6.1.4.1.789.2.5 |
netappVserver OBJECT IDENTIFIER .1.3.6.1.4.1.789.2.6 |
netappDataFabricManager OBJECT IDENTIFIER .1.3.6.1.4.1.789.3 |
netappSupportConsole OBJECT IDENTIFIER .1.3.6.1.4.1.789.4 |
netappOnCommand OBJECT IDENTIFIER .1.3.6.1.4.1.789.5 |
netappModuleIdThe mib module for NetApp SNMPv2 entities MODULE-IDENTITY .1.3.6.1.6.3.789 |