NBS-TUNABLE-MIB
AI MIB Summary
The NBS-TUNABLE-MIB module enables the monitoring and configuration of optical tunable parameters, such as center wavelength, bandwidth, and power levels, on network-based tunable optics hardware. This interface facilitates precise control over dynamic optical signal characteristics to maintain link integrity and optimize spectral efficiency in high-capacity transport networks.
MIB for representing Tunable Optics parameters
Main OID:
nbsTunableMib.1.3.6.1.4.1.629.203
13
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
13 total| Object Name |
|---|
nbsTunableMibMIB for representing Tunable Optics parameters MODULE-IDENTITY .1.3.6.1.4.1.629.203 |
nbsTunableGrpMIB for representing Tunable Optics parameters OBJECT IDENTIFIER .1.3.6.1.4.1.629.203.1 |
nbsTunableChannelTableSizeThe number of entries in nbsTunableChannelTable.ro Unsigned32 .1.3.6.1.4.1.629.203.1.1 |
nbsTunableChannelTableA table to report and configure tunable optics settings. SEQUENCE OF NbsTunableChannelEntry .1.3.6.1.4.1.629.203.1.2 |
nbsTunableChannelEntryDescribes a setting for an interface's tunable optics. NbsTunableChannelEntry .1.3.6.1.4.1.629.203.1.2.1 |
nbsTunableChannelIfIndexThe Mib2 ifIndex of this optic's portro InterfaceIndex .1.3.6.1.4.1.629.203.1.2.1.1 |
nbsTunableChannelFreqStartThe first allowable frequency for this tunable optic, in
GigaHertz (GHz), unless FreqExponent != 9.
For L-Band, ITU Grid 48 is '184800'
For Q-Band, ITU Grid 48 is '184850'
For C-Band, ITU Grid 1 is '190100'
For H-Band, ITU Grid 1 is '190150'
If GHz does not provide the appropriate resolution, the
tunable optic may report a FreqExponent less than 9.
If 32 bits is insufficient to cover the range in GHz, the
tunable optic may report a FreqExponent greater than 9.ro INTEGER .1.3.6.1.4.1.629.203.1.2.1.2 |
nbsTunableChannelFreqEndThe last allowable frequency (inclusive) for this tunable
optic, in GigaHertz (GHz), unless FreqExponent != 9.
For L-Band, ITU Grid 99 is '189900'
For Q-Band, ITU Grid 99 is '189950'
For C-Band, ITU Grid 72 is '197200'
For H-Band, ITU Grid 72 is '197250'
If GHz does not provide the appropriate resolution, the
tunable optic may report a FreqExponent less than 9.
If 32 bits is insufficient to cover the range in GHz, the
tunable optic may report a FreqExponent greater than 9.ro INTEGER .1.3.6.1.4.1.629.203.1.2.1.3 |
nbsTunableChannelFreqStepThe spacing of the allowable frequencies that this tunable
optic supports, in GigaHertz (GHz), unless FreqExponent != 9.
100 indicates the standard ITU grid spacing of 100GHz.
For example, if this tunable optic supports both C and H
band, or both Q and L band, FreqStep should report 50.
If this tunable optic supports steps finer than 1GHz,
the tunable optic may report a FreqExponent less than 9.ro INTEGER .1.3.6.1.4.1.629.203.1.2.1.4 |
nbsTunableChannelFreqExponentThe exponent of all the Freq values (including FreqStep). 9
(the default) indicates all units are in GigaHertz (GHz).ro INTEGER .1.3.6.1.4.1.629.203.1.2.1.5 |
nbsTunableChannelFreqAdminThe administratively desired frequency of this tunable
optic, in GigaHertz (GHz), unless FreqExponent != 9.rw INTEGER .1.3.6.1.4.1.629.203.1.2.1.6 |
nbsTunableChannelFreqOperThe current operational frequency of this tunable
optic, in GigaHertz (GHz), unless FreqExponent != 9.ro INTEGER .1.3.6.1.4.1.629.203.1.2.1.7 |
nbsTunableChannelFreqDefaultThe default frequency of this tunable optic, in GigaHertz
(GHz), unless FreqExponent != 9.ro INTEGER .1.3.6.1.4.1.629.203.1.2.1.8 |