NBS-SIGCOND-MIB
AI MIB Summary
The NBS-SIGCOND-MIB module provides SNMP access to monitor and configure signal conditioning parameters, including input/output signal levels, filtering states, and alarm thresholds, for NBS (Network Business Solutions) signal conditioning hardware or embedded software modules. It enables the tracking of real-time signal integrity metrics and the management of conditioning profiles to ensure compliant signal transmission within telecommunications or industrial control networks.
Signal Conditioning mib
Main OID:
nbsSigCondMib.1.3.6.1.4.1.629.227
68
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
68 total| Object Name |
|---|
nbsSigCondMibSignal Conditioning mib MODULE-IDENTITY .1.3.6.1.4.1.629.227 |
nbsSigCondVoaPortGrpVariable Optical Attenuation at the port level. OBJECT IDENTIFIER .1.3.6.1.4.1.629.227.1 |
nbsSigCondVoaPortTableSizeThe number of ports supporting variable optical attenuation at the port level.ro Unsigned32 .1.3.6.1.4.1.629.227.1.1 |
nbsSigCondVoaPortTableList of ports supporting variable optical attenuation at the port level. SEQUENCE OF NbsSigCondVoaPortEntry .1.3.6.1.4.1.629.227.1.2 |
nbsSigCondVoaPortEntry NbsSigCondVoaPortEntry .1.3.6.1.4.1.629.227.1.2.1 |
nbsSigCondVoaPortIfIndexThe Mib2 ifIndex of the attenuable port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.227.1.2.1.1 |
nbsSigCondVoaPortRxAttenuAdminPersistent and immediately updated. User-requested attenuation to be applied to received signal, expressed in millidecibels (mdB). Not supported value: -200000rw INTEGER (-100000..100000) .1.3.6.1.4.1.629.227.1.2.1.2 |
nbsSigCondVoaPortRxAttenuOperAttenuation actually being applied to received signal, in millidecibels (mdB). Not supported value: -200000ro INTEGER .1.3.6.1.4.1.629.227.1.2.1.3 |
nbsSigCondVoaPortTxAttenuAdminPersistent and immediately updated. User-requested attenuation to be applied before transmitting signal, expressed in millidecibels (mdB). Not supported value: -200000rw INTEGER (-100000..100000) .1.3.6.1.4.1.629.227.1.2.1.4 |
nbsSigCondVoaPortTxAttenuOperAttenuation actually being applied before transmitting signal, in millidecibels (mdB). Not supported value: -200000ro INTEGER .1.3.6.1.4.1.629.227.1.2.1.5 |
nbsSigCondVoaChannelGrpVariable Optical Attenuation at the channel level. OBJECT IDENTIFIER .1.3.6.1.4.1.629.227.2 |
nbsSigCondVoaChannelRangeTableSizeThe number of mux ports supporting variable optical attenuation at the channel level.ro Unsigned32 .1.3.6.1.4.1.629.227.2.1 |
nbsSigCondVoaChannelRangeTableThe channel attenuation values supported on this port. SEQUENCE OF NbsSigCondVoaChannelRangeEntry .1.3.6.1.4.1.629.227.2.2 |
nbsSigCondVoaChannelRangeEntry NbsSigCondVoaChannelRangeEntry .1.3.6.1.4.1.629.227.2.2.1 |
nbsSigCondVoaChannelRangeIfIndexThe Mib2 ifIndex of the mux port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.227.2.2.1.1 |
nbsSigCondVoaChannelRangeMinThe lowest channel attenuation value supported by this mux port, expressed in millidecibels (mdB). This is the smallest attenuation supported.ro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.2.2.1.2 |
nbsSigCondVoaChannelRangeMaxThe greatest channel attenuation value supported by this mux port, expressed in millidecibels (mdB). This is the largest attenuation supported.ro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.2.2.1.3 |
nbsSigCondVoaChannelRangeIncrThe precision of the VOA, expressed in millidecibels (mdB). The minimum difference between attenuation values.ro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.2.2.1.4 |
nbsSigCondRamanGrpRaman amplifier information for the port. OBJECT IDENTIFIER .1.3.6.1.4.1.629.227.3 |
nbsSigCondRamanTableSizeThe number of raman ports in this system.ro Unsigned32 .1.3.6.1.4.1.629.227.3.1 |
nbsSigCondRamanTableTable of Raman readings. SEQUENCE OF NbsSigCondRamanEntry .1.3.6.1.4.1.629.227.3.2 |
nbsSigCondRamanEntryRaman readings on an individual port. NbsSigCondRamanEntry .1.3.6.1.4.1.629.227.3.2.1 |
nbsSigCondRamanIfIndexThe Mib2 ifIndex of the Raman port InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.227.3.2.1.1 |
nbsSigCondRamanPumpPwrAdminPersistent and immediately updated. User-requested pump power, in microwatts (uW). User interfaces should show this in millWatts (mW). Not supported value: -1rw INTEGER .1.3.6.1.4.1.629.227.3.2.1.2 |
nbsSigCondRamanPumpPwrOperAgent reported pump power, in microwatts (uW). User interfaces should show this in millWatts (mW). Not supported value: -1ro INTEGER .1.3.6.1.4.1.629.227.3.2.1.3 |
nbsSigCondEqualizeGrpManagement info for equalizing power levels among channels within a WDM port OBJECT IDENTIFIER .1.3.6.1.4.1.629.227.20 |
nbsSigCondEqualizeTableSizeThe number of entries in nbsSigCondEqualizeTable.ro Unsigned32 .1.3.6.1.4.1.629.227.20.1 |
nbsSigCondEqualizeTableList of WDM ports supporting power level equalization. SEQUENCE OF NbsSigCondEqualizeEntry .1.3.6.1.4.1.629.227.20.2 |
nbsSigCondEqualizeEntryEqualization parameters and settings NbsSigCondEqualizeEntry .1.3.6.1.4.1.629.227.20.2.1 |
nbsSigCondEqualizeIfIndexThe Mib2 ifIndex of this channel's WDM portro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.227.20.2.1.1 |
nbsSigCondEqualizeStateUsed to enable or disable channel equalization on this port. The value disabled(2) disables the feature. No attempt to equalize power levels will be made, and no equalization events will be triggered. The value enabled(3) enables the feature. A best-effort attempt to keep the port signal within the nbsSigCondEqualizeDesired range will be made. Equalization events will be triggered if the power cannot be kept within the nbsSigCondEqualizeDesired range. If this port does not support equalization, this object will report notSupported (1), and any SET requests to this object will be rejected.rw Enumeration .1.3.6.1.4.1.629.227.20.2.1.10 |
nbsSigCondEqualizeLimitMinThe lowest channel TxPower setting the equalizer supportsro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.20.2.1.11 |
nbsSigCondEqualizeLimitMaxThe highest channel TxPower setting the equalizer supportsro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.20.2.1.12 |
nbsSigCondEqualizeDesiredMinThe user-settable minimum channel TxPower level. Allowed values are from nbsSigCondEqualizeLimitMin to nbsSigCondEqualizeLimitMax, inclusive. Equalizer must attempt to maintain the channels' signal at or above this level. The event nbsSigCondEventEqualizeTooLow indicates that it was unable to meet the desired minimum signal strength for a given channel.rw NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.20.2.1.21 |
nbsSigCondEqualizeDesiredMaxThe user-settable maximum channel TxPower level. Allowed values are from nbsSigCondEqualizeLimitMin to nbsSigCondEqualizeLimitMax, inclusive. Equalizer must attempt to maintain the channels' signal at or below this level. The event nbsSigCondEventEqualizeTooHigh indicates that it was unable to meet the desired maximum signal strength for a given channel.rw NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.20.2.1.22 |
nbsSigCondEqualizeDesiredValEqualizer must attempt to maintain the channels' signal at this level. Allowed values are from nbsSigCondEqualizeLimitMin to nbsSigCondEqualizeLimitMax, inclusive.rw NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.20.2.1.23 |
nbsSigCondRedundGrpManagement info for power level based redundancy OBJECT IDENTIFIER .1.3.6.1.4.1.629.227.30 |
nbsSigCondRedundTableSizeThe number of entries in nbsSigCondRedund.ro Unsigned32 .1.3.6.1.4.1.629.227.30.1 |
nbsSigCondRedundTableList of ports supporting power level redundancy. SEQUENCE OF NbsSigCondRedundEntry .1.3.6.1.4.1.629.227.30.2 |
nbsSigCondRedundEntryRedundancy settings NbsSigCondRedundEntry .1.3.6.1.4.1.629.227.30.2.1 |
nbsSigCondRedundIfIndexThe Mib2 ifIndex of this channel's Redundancy portro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.227.30.2.1.1 |
nbsSigCondRedundLimitMinThe lowest channel Power settingro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.30.2.1.5 |
nbsSigCondRedundLimitMaxThe highest channel Power settingro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.30.2.1.8 |
nbsSigCondRedundDesiredMinThe lowest channel Power setting before the redundancy kicks inrw NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.30.2.1.10 |
nbsSigCondRedundDesiredMaxThe highest channel Power setting before the redundancy kicks inrw NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.30.2.1.15 |
nbsSigCondPortGrpPower readings from the port. OBJECT IDENTIFIER .1.3.6.1.4.1.629.227.40 |
nbsSigCondPortTableSizeThe number of entries in nbsSigCondPortTable.ro Unsigned32 .1.3.6.1.4.1.629.227.40.1 |
nbsSigCondPortTableTable of VOA and VGA ports. SEQUENCE OF NbsSigCondPortEntry .1.3.6.1.4.1.629.227.40.2 |
nbsSigCondPortEntry NbsSigCondPortEntry .1.3.6.1.4.1.629.227.40.2.1 |
nbsSigCondPortIfIndexThe Mib2 ifIndex of the port InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.227.40.2.1.1 |
nbsSigCondPortRxPowerMeasured receiver power, in millidecibels (mdBm). User interfaces should show this in decibels (dBm). Not supported value: -100000ro INTEGER .1.3.6.1.4.1.629.227.40.2.1.2 |
nbsSigCondPortTxPowerMeasured transmitter power, in millidecibels (mdBm). User interfaces should show this in decibels (dBm). Not supported value: -100000ro INTEGER .1.3.6.1.4.1.629.227.40.2.1.3 |
nbsSigCondPortReflectionMeasured back reflection power, in millidecibels (mdBm). User interfaces should show this in decibels (dBm). Not supported value: -100000ro INTEGER .1.3.6.1.4.1.629.227.40.2.1.4 |
nbsSigCondChannelGrpSignal info for WDM channels within a WDM port OBJECT IDENTIFIER .1.3.6.1.4.1.629.227.50 |
nbsSigCondChannelTableSizeThe number of entries in nbsSigCondChannelTable.ro Unsigned32 .1.3.6.1.4.1.629.227.50.1 |
nbsSigCondChannelTableWDM channels within a mux port SEQUENCE OF NbsSigCondChannelEntry .1.3.6.1.4.1.629.227.50.2 |
nbsSigCondChannelEntry NbsSigCondChannelEntry .1.3.6.1.4.1.629.227.50.2.1 |
nbsSigCondChannelIfIndexThe Mib2 ifIndex of this channel's mux port InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.227.50.2.1.1 |
nbsSigCondChannelCenterlineThe center frequency of this channel, in MHzro NbsTcMHz (NBS-MIB) .1.3.6.1.4.1.629.227.50.2.1.2 |
nbsSigCondChannelRxPowerThe dynamically measured or calculated receive signal strengthro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.50.2.1.11 |
nbsSigCondChannelTxPowerThe dynamically measured or calculated transmit signal strengthro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.50.2.1.12 |
nbsSigCondChannelTxAttenuThe actual attenuation applied to this channel, possibly representing changes made by the equalization process if nbsSigCondEqualizeState is enabled for this IfIndex.ro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.50.2.1.14 |
nbsSigCondChannelRxAttenuThe actual attenuation applied to this channel, possibly representing changes made by the equalization process if nbsSigCondEqualizeState is enabled for this IfIndex.ro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.227.50.2.1.15 |
nbsSigCondTrapsSNMP Traps or Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.629.227.200 |
nbsSigCondEventSNMP Traps or Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.629.227.200.0 |
nbsSigCondEventEqualizeOkSent when equalizer becomes able to maintain TxPower within the user-specified nbsSigCondEqualizeDesired range. This Notification is of severity ERROR, which means it should be emitted unless disabled or nbsCmmcSysTrapTblEntLevel is set to a severity worse than error(3). NOTIFICATION-TYPE .1.3.6.1.4.1.629.227.200.0.20 |
nbsSigCondEventEqualizeTooLowSent when equalizer becomes unable to maintain TxPower at or above nbsSigCondEqualizeDesiredMin. This Notification is of severity ERROR, which means it should be emitted unless disabled or nbsCmmcSysTrapTblEntLevel is set to a severity worse than error(3). NOTIFICATION-TYPE .1.3.6.1.4.1.629.227.200.0.21 |
nbsSigCondEventEqualizeTooHighSent when equalizer becomes unable to maintain TxPower at or below nbsSigCondEqualizeDesiredMax. This Notification is of severity ERROR, which means it should be emitted unless disabled or nbsCmmcSysTrapTblEntLevel is set to a severity worse than error(3). NOTIFICATION-TYPE .1.3.6.1.4.1.629.227.200.0.22 |