NBS-ROADM-MIB
AI MIB Summary
The NBS-ROADM-MIB module enables the monitoring and configuration of NBS Reconfigurable Optical Add/Drop Multiplexing (ROADM) hardware, specifically tracking optical port states, wavelength routing tables, and signal power levels for dynamic spectral management.
Reconfigurable Optical Add/Drop Multiplexing
Main OID:
nbsRoadmMib.1.3.6.1.4.1.629.235
71
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
71 total| Object Name |
|---|
nbsRoadmMibReconfigurable Optical Add/Drop Multiplexing MODULE-IDENTITY .1.3.6.1.4.1.629.235 |
nbsRoadmCommonGrpChannels per Common port OBJECT IDENTIFIER .1.3.6.1.4.1.629.235.10 |
nbsRoadmCommonTableSizeThe number of entries in nbsRoadmCommonTablero Unsigned32 .1.3.6.1.4.1.629.235.10.1 |
nbsRoadmCommonTableWSS Switch Configuration SEQUENCE OF NbsRoadmCommonEntry .1.3.6.1.4.1.629.235.10.2 |
nbsRoadmCommonEntry NbsRoadmCommonEntry .1.3.6.1.4.1.629.235.10.2.1 |
nbsRoadmCommonIfIndexThe Mib2 ifIndex of this channel's trunk port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.10.2.1.1 |
nbsRoadmCommonStagingQuickCfgImpulse object used to replace this port's current nbsRoadmStagingTable entries with a known configuration. Users may create the nbsRoadmStagingTable manually, a row at a time. Often it would save the users much work if they could initially populate this table with a standard or known configuration and then customize it to their own requirements. When read, this object will indicate whether this feature is available by reporting either notSupported(1) or supported(2). The value std100Ghz(3) overwrites this port's nbsRoadmStagingTable with all the standard 100 GHz ITU grid channels which are supported by this port. The value std50Ghz(4) overwrites this port's nbsRoadmStagingTable with all the standard 50 GHz ITU grid channels which are supported by this port. Overwriting the nbsRoadmStagingTable entries has no effect on the live configuration until committed using nbsRoadmCommonStagingCommitrw Enumeration .1.3.6.1.4.1.629.235.10.2.1.10 |
nbsRoadmCommonStagingAddCapsThis object indicates if this port is capable of Addro Enumeration .1.3.6.1.4.1.629.235.10.2.1.13 |
nbsRoadmCommonStagingDropCapsThis object indicates if this port is capable of Dropro Enumeration .1.3.6.1.4.1.629.235.10.2.1.14 |
nbsRoadmCommonStagingCommitImpulse object used to rewrite the entire WSS configuration. In order to protect users against accidentally dropping traffic streams, a two-step process is used. In the first step, users 'stage' a WSS configuration. The nbsRoadmStagingTable is like a scratchpad where users can build and modify the entire WSS configuration without affecting the live network. Here users assign channels to WSS ports, and for flex-grids, define the channels. The second step is to replace the existing WSS configuration (which can be read from the nbsRoadmCommittedTable). To replace the existing setup with the configuration specified in the nbsRoadmStagingTable, users set this object to apply(4). To discard all changes done to nbsRoadmStagingTable, users set this object to revertToCommitted(3), which will synchronize the Staging table to the Staged configuation. When read, this object will report the action last requested until that action is completed, after which it will report supported(2).rw NbsTcStagingCommit (NBS-MIB) .1.3.6.1.4.1.629.235.10.2.1.20 |
nbsRoadmCommonCommittedGridTypeThis object is automatically updated in association with writes to nbsRoadmCommonStagingApply. It indicates whether or not this port's updated nbsRoadmCommittedTable is equivalent to a standard ITU grid such as would come from nbsRoadmCommonStagingQuickCfg. If the nbsRoadmCommittedTable matches the results from a nbsRoadmCommonStagingQuickCfg of std100Ghz(4), then this object will report std100Ghz(4). If the nbsRoadmCommittedTable matches the results from a nbsRoadmCommonStagingQuickCfg of std50Ghz(5), then this object will report std50Ghz(5). If the nbsRoadmCommittedTable matches neither the results from a nbsRoadmCommonStagingQuickCfg of std100Ghz(4) or std50Ghz(5), then this object will report customized(3).ro Enumeration .1.3.6.1.4.1.629.235.10.2.1.30 |
nbsRoadmCommonCommittedChannelsThe number of channels for this wdm port in the nbsRoadmCommittedTable.ro INTEGER .1.3.6.1.4.1.629.235.10.2.1.40 |
nbsRoadmFlexgridGrpDescribes Flexgrid centerline and bandwidth capabilities OBJECT IDENTIFIER .1.3.6.1.4.1.629.235.20 |
nbsRoadmFlexgridTableSizeThe number of entries in nbsRoadmFlexgridTable.ro Unsigned32 .1.3.6.1.4.1.629.235.20.1 |
nbsRoadmFlexgridTableFlexgrid channel creation parameters SEQUENCE OF NbsRoadmFlexgridEntry .1.3.6.1.4.1.629.235.20.2 |
nbsRoadmFlexgridEntry NbsRoadmFlexgridEntry .1.3.6.1.4.1.629.235.20.2.1 |
nbsRoadmFlexgridIfIndexThe Mib2 ifIndex of the Common port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.20.2.1.1 |
nbsRoadmFlexgridCenterlineMinThe frequency of the lowest centerline possible.ro NbsTcMHz (NBS-MIB) .1.3.6.1.4.1.629.235.20.2.1.21 |
nbsRoadmFlexgridCenterlineMaxThe frequency of the highest centerline possible.ro NbsTcMHz (NBS-MIB) .1.3.6.1.4.1.629.235.20.2.1.22 |
nbsRoadmFlexgridCenterlineIncrCenterline increment - the minimum possible difference, in MHz, between adjacent channels' centerlines.ro NbsTcMHz (NBS-MIB) .1.3.6.1.4.1.629.235.20.2.1.23 |
nbsRoadmFlexgridBandwidthMinThe minimum bandwidth possible. Each channel must be at least this wide.ro NbsTcMHz (NBS-MIB) .1.3.6.1.4.1.629.235.20.2.1.31 |
nbsRoadmFlexgridBandwidthMaxThe maximum bandwidth possible. Each channel must be at most this wide.ro NbsTcMHz (NBS-MIB) .1.3.6.1.4.1.629.235.20.2.1.32 |
nbsRoadmFlexgridBandwidthIncrThe granularity of bandwidths possible. Each channel's bandwidth must be a multiple of this number.ro NbsTcMHz (NBS-MIB) .1.3.6.1.4.1.629.235.20.2.1.33 |
nbsRoadmStagingGrpScratchpad for users to configure channels and WSS setup OBJECT IDENTIFIER .1.3.6.1.4.1.629.235.30 |
nbsRoadmStagingTableSizeThe number of entries in nbsRoadmStagingTablero Unsigned32 .1.3.6.1.4.1.629.235.30.1 |
nbsRoadmStagingTableScratchpad where users can specify a new WSS configuration. Changes to this table have no effect on the system until they are committed using nbsRoadmCommonStagingApply. SEQUENCE OF NbsRoadmStagingEntry .1.3.6.1.4.1.629.235.30.2 |
nbsRoadmStagingEntry NbsRoadmStagingEntry .1.3.6.1.4.1.629.235.30.2.1 |
nbsRoadmStagingIfIndexThe Mib2 ifIndex of this channel's Common port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.30.2.1.1 |
nbsRoadmStagingCenterlineThe center frequency of this channel, in MHzro NbsTcMHz (NBS-MIB) .1.3.6.1.4.1.629.235.30.2.1.2 |
nbsRoadmStagingBandwidthThe amount of spectrum allocated for this channel, in MHzrw NbsTcMHz (NBS-MIB) .1.3.6.1.4.1.629.235.30.2.1.10 |
nbsRoadmStagingChannelNameUser-assigned name for this channel. The assigned name must be unique within this agent system.rw DisplayString .1.3.6.1.4.1.629.235.30.2.1.30 |
nbsRoadmStagingAddPortThe Mib2 ifIndex of this channel's Add port. This channel will be blocked from all Add ports except the port specified here. Setting this object to 0 blocks the channel on all Add ports. Not supported value : -1rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.30.2.1.41 |
nbsRoadmStagingDropPortThe Mib2 ifIndex of this channel's Drop port. This channel will be blocked on all Drop ports except the port specified here. Setting this object to 0 blocks the channel on all Drop ports. Not supported value : -1rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.30.2.1.42 |
nbsRoadmStagingSecondaryPortThe Mib2 ifIndex of this channel's Secondary port. This channel will be blocked from all Add ports except the port specified here. Setting this object to 0 removes the secondary.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.30.2.1.43 |
nbsRoadmStagingSecondAttenuAttenuation actually being applied to the secondary port, in millidecibels (mdB).rw NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.235.30.2.1.44 |
nbsRoadmStagingAddAttenuAttenuation to be applied to Add channel, expressed in millidecibels (mdB). Default is the blocked value as defined in NbsTcMilliDbrw NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.235.30.2.1.51 |
nbsRoadmStagingDropAttenuAttenuation to be applied to Drop channel, expressed in millidecibels (mdB). Default is the blocked value as defined in NbsTcMilliDbrw NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.235.30.2.1.52 |
nbsRoadmStagingItuNameIf this channel's centerline and bandwidth match a channel specified in the ITU grid DWDM standard, the name of that ITU channel will be shown here. The naming convention for 100GHz channels will be the two digit ITU channel number. For 50GHz channels, the convention will be to specify either the C or H band, followed by the two digit ITU channel number. For user-defined channels that don't match an ITU channel, this object will report 'N/A'.ro DisplayString .1.3.6.1.4.1.629.235.30.2.1.53 |
nbsRoadmStagingRowStatusUsed to create and delete channels in staging arearw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.629.235.30.2.1.99 |
nbsRoadmCommittedGrpAdministratively active channel and WSS setup. OBJECT IDENTIFIER .1.3.6.1.4.1.629.235.31 |
nbsRoadmCommittedTableSizeThe number of entries in nbsRoadmCommittedTablero Unsigned32 .1.3.6.1.4.1.629.235.31.1 |
nbsRoadmCommittedTableCurrent wss configuration SEQUENCE OF NbsRoadmCommittedEntry .1.3.6.1.4.1.629.235.31.2 |
nbsRoadmCommittedEntry NbsRoadmCommittedEntry .1.3.6.1.4.1.629.235.31.2.1 |
nbsRoadmCommittedIfIndexThe Mib2 ifIndex of the channel's Common port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.31.2.1.1 |
nbsRoadmCommittedCenterlineThe center frequency of this channel, in MHzro NbsTcMHz (NBS-MIB) .1.3.6.1.4.1.629.235.31.2.1.2 |
nbsRoadmCommittedBandwidthThe amount of spectrum allocated for this channel, in MHzro NbsTcMHz (NBS-MIB) .1.3.6.1.4.1.629.235.31.2.1.10 |
nbsRoadmCommittedChannelNameUser-assigned name for this channel. The assigned name must be unique within this agent system. This object is equivalent to nbsWdmChannelCustomName.ro DisplayString .1.3.6.1.4.1.629.235.31.2.1.30 |
nbsRoadmCommittedAddPortThe Mib2 ifIndex of this channel's Add port. This channel will be blocked from all Add ports except the port specified here. Setting this object to 0 blocks the channel on all ports. Not supported value : -1ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.31.2.1.41 |
nbsRoadmCommittedDropPortThe Mib2 ifIndex of this channel's Drop port. This channel will be blocked on all Drop ports except the port specified here. Setting this object to 0 blocks the channel on all ports. Not supported value : -1ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.31.2.1.42 |
nbsRoadmCommittedSecondaryPortThe Mib2 ifIndex of this channel's Secondary Add port. This channel will be blocked from all Add ports except the port specified here. Setting this object to 0 removes the secondary.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.31.2.1.43 |
nbsRoadmCommittedSecondAttenuAttenuation actually being applied to the secondary port, in millidecibels (mdB).ro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.235.31.2.1.44 |
nbsRoadmCommittedAddAttenuAttenuation actually being applied to Add channel, in millidecibels (mdB).ro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.235.31.2.1.51 |
nbsRoadmCommittedDropAttenuAttenuation actually being applied to Drop channel, in millidecibels (mdB).ro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.235.31.2.1.52 |
nbsRoadmCommittedItuNameIf this channel's centerline and bandwidth match a channel specified in the ITU grid DWDM standard, the name of that ITU channel will be shown here. The naming convention for 100GHz channels will be the two digit ITU channel number. For 50GHz channels, the convention will be to specify either the C or H band, followed by the two digit ITU channel number. For user-defined channels that don't match an ITU channel, this object will report 'N/A'.ro DisplayString .1.3.6.1.4.1.629.235.31.2.1.60 |
nbsRoadmRedundantGrpCurrent active port. OBJECT IDENTIFIER .1.3.6.1.4.1.629.235.32 |
nbsRoadmRedundantTableSizeThe number of entries in nbsRoadmRedundantTablero Unsigned32 .1.3.6.1.4.1.629.235.32.1 |
nbsRoadmRedundantTableCurrent wss redundancy configuration SEQUENCE OF NbsRoadmRedundantEntry .1.3.6.1.4.1.629.235.32.2 |
nbsRoadmRedundantEntry NbsRoadmRedundantEntry .1.3.6.1.4.1.629.235.32.2.1 |
nbsRoadmRedundantIfIndexThe Mib2 ifIndex of the channel's Common port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.32.2.1.1 |
nbsRoadmRedundantCenterlineThe center frequency of this channel, in MHzro NbsTcMHz (NBS-MIB) .1.3.6.1.4.1.629.235.32.2.1.2 |
nbsRoadmRedundantItuNameIf this channel's centerline and bandwidth match a channel specified in the ITU grid DWDM standard, the name of that ITU channel will be shown here. The naming convention for 100GHz channels will be the two digit ITU channel number. For 50GHz channels, the convention will be to specify either the C or H band, followed by the two digit ITU channel number. For user-defined channels that don't match an ITU channel, this object will report 'N/A'.ro DisplayString .1.3.6.1.4.1.629.235.32.2.1.10 |
nbsRoadmRedundantChannelNameUser-assigned name for this channel. The assigned name must be unique within this agent system. This object is equivalent to nbsWdmChannelCustomName.ro DisplayString .1.3.6.1.4.1.629.235.32.2.1.20 |
nbsRoadmRedundantMapPortThe Mib2 ifIndex of the current channel's map port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.32.2.1.29 |
nbsRoadmRedundantSecondaryPortThe Mib2 ifIndex of the current channel's Secondary port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.32.2.1.30 |
nbsRoadmRedundantCurPortThe Mib2 ifIndex of the current channel's Secondary port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.235.32.2.1.40 |
nbsRoadmRedundantCurAttenuAttenuation actually being applied to the redundant channel, in millidecibels (mdB).ro NbsTcMilliDb (NBS-MIB) .1.3.6.1.4.1.629.235.32.2.1.41 |
nbsRoadmRedundantCurStateThe state of the current redundant port.ro Enumeration .1.3.6.1.4.1.629.235.32.2.1.50 |
nbsRoadmTrapsSNMP Traps or Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.629.235.100 |
nbsRoadmEventEvent Notification Definitions OBJECT IDENTIFIER .1.3.6.1.4.1.629.235.100.0 |
nbsRoadmEventStageAreaCommittedSent after an nbsRoadmCommonStagingCommit request is fulfilled. This Notification is of severity ERROR, which means it should be emitted unless disabled or nbsCmmcSysTrapTblEntLevel is set to a severity worse than error(3). NOTIFICATION-TYPE .1.3.6.1.4.1.629.235.100.0.10 |
nbsRoadmEventRedundancyTriggeredSent after an channel redundancy takes effect. This Notification is of severity ERROR, which means it should be emitted unless disabled or nbsCmmcSysTrapTblEntLevel is set to a severity worse than error(3). NOTIFICATION-TYPE .1.3.6.1.4.1.629.235.100.0.20 |