NBS-OTNOH-MIB
OTN/SONET Overhead fields
Main OID:
nbsOtnohMib.1.3.6.1.4.1.629.224
13
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
13 total| Object Name |
|---|
nbsOtnohMibOTN/SONET Overhead fields MODULE-IDENTITY .1.3.6.1.4.1.629.224 |
nbsOtnohTtiGrpOTN overhead fields OBJECT IDENTIFIER .1.3.6.1.4.1.629.224.1 |
nbsOtnohTtiTableOTN Trail Trace Identifier values SEQUENCE OF NbsOtnohTtiEntry .1.3.6.1.4.1.629.224.1.1 |
nbsOtnohTtiEntryTrail Trace Identifier (TTI) values for a particular interface. Per ITU-T G.709, a TTI has 64 bytes; the first 16 contain the Source Access Point Identifer (SAPI), the next 16 contain the Destination Access Point Identifer (SAPI), and the final 32 contain an Operator Specific value. For the SAPI and DAPI, the first byte is all zero, and the other fifteen are seven-bit International Reference Alphabet (IRA) characters; ACSII is the USA variant. There is a three character international segment field followed by a twelve character national segment field, which consists of two subfields: the ITU carrier code (ICC) and a unique access point code (UAPC). NbsOtnohTtiEntry .1.3.6.1.4.1.629.224.1.1.1 |
nbsOtnohTtiIfIndexThe mib2 ifIndex InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.224.1.1.1.1 |
nbsOtnohTtiScopeThis object specifies the TTI field that the following row values apply. Enumeration .1.3.6.1.4.1.629.224.1.1.1.2 |
nbsOtnohTtiSendSapiThis object specifies the Source Access Point Identifier (SAPI) byte value(s) to send in the selected TTI field of outgoing OTN frames. There are sixteen bytes in the SAPI. Any bytes unspecified by this string will be set to zero.rw OCTET STRING .1.3.6.1.4.1.629.224.1.1.1.3 |
nbsOtnohTtiSendDapiThis object specifies the Destination Access Point Identifier (DAPI) byte value(s) to send in the selected TTI field of outgoing OTN frames. There are sixteen bytes in the DAPI. Any bytes unspecified by this string will be set to zero.rw OCTET STRING .1.3.6.1.4.1.629.224.1.1.1.4 |
nbsOtnohTtiSendOpSpecThis object specifies the Operator Specfic byte value(s) to send in the selected TTI field of outgoing OTN frames. There are thirty-two bytes in the SAPI. Any bytes unspecified by this string will be set to zero.rw OCTET STRING .1.3.6.1.4.1.629.224.1.1.1.5 |
nbsOtnohTtiExpectSapiThis object specifies the sixteen byte Source Access Point Identifier (SAPI) value to expect in the selected TTI field of incoming OTN frames. A zero length octet string indicates no SAPI matching is desired.rw OCTET STRING .1.3.6.1.4.1.629.224.1.1.1.6 |
nbsOtnohTtiExpectDapiThis object specifies the sixteen byte Destination Access Point Identifier (DAPI) value to expect in the selected TTI field of incoming OTN frames. A zero length octet string indicates no DAPI matching is desired.rw OCTET STRING .1.3.6.1.4.1.629.224.1.1.1.7 |
nbsOtnohTtiExpectOpSpecThis object specifies the thirty-two byte Operator Specfic value to expect in the selected TTI field of incoming OTN frames. A zero length octet string indicates no Operator Specfic matching is desired.rw OCTET STRING .1.3.6.1.4.1.629.224.1.1.1.8 |
nbsOtnohTtiRowStatusUsed to add/remove the configuration of a network segmentrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.629.224.1.1.1.10 |
More MIBs from Nbase
Browse all NbaseMIBs →NBS-CMMC-MIB
SNMP MIB module
530 objects→
NBS-COHERENT-MIB
The NBS-COHERENT-MIB module enables monitoring of Coherent CFP (Common Form Factor Pluggable) optical transceiver parameters, including optical power levels, temperature, bias current, and voltage, on network interface cards supporting the Coherent CFP form factor.
247 objects→
RT-CFG-MIB
Standard SNMP MIB module defining data structures for RT-CFG-MIB.
246 objects→
NBASE-G1-MIB
Standard SNMP MIB module defining data structures for NBASE-G1-MIB.
204 objects→
NBS-EUSM-MIB
SNMP MIB module
186 objects→
NBS-SLA-MIB
The NBS-SLA-MIB module enables the monitoring and management of Service Level Agreement (SLA) performance metrics, such as latency, jitter, packet loss, and availability, for network services within NBS (Nortel Broadband Services) infrastructure. It facilitates the collection of SLA violation data and compliance status to support automated quality-of-service assurance and reporting.
139 objects→