NBS-EFM-MIB
AI MIB Summary
The NBS-EFM-MIB enables monitoring of 802.3ah Ethernet in the First Mile (EFM) operational states, link performance counters, and physical layer diagnostics on MRV Network Communications (NBS) hardware. This private MIB facilitates the tracking of EFM session establishment, link status, and error statistics specific to MRV's Ethernet access equipment.
Private MRV MIB for representing 802.3ah (Ethernet in the First Mile) information
Main OID:
nbsEfmMib.1.3.6.1.4.1.629.300
64
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
64 total| Object Name |
|---|
nbsEfmMibPrivate MRV MIB for representing 802.3ah (Ethernet in the First Mile) information MODULE-IDENTITY .1.3.6.1.4.1.629.300 |
nbsEfmObjectsall MIB objects in nbsEfm MIB. OBJECT IDENTIFIER .1.3.6.1.4.1.629.300.1 |
nbsEfmOamGrpAll OAM objects. OBJECT IDENTIFIER .1.3.6.1.4.1.629.300.1.3 |
nbsEfmOamTableOperations, Administration, and Management information SEQUENCE OF NbsEfmOamEntry .1.3.6.1.4.1.629.300.1.3.1 |
nbsEfmOamEntryContains a desription of a particular Oam. There are two entries for each OAM link, one entry for the local side, one for the remote. NbsEfmOamEntry .1.3.6.1.4.1.629.300.1.3.1.1 |
nbsEfmPhysicalIfIndexifIndex from the MIB-II Interface Table for the physical port on which this OAM traffic flows.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.1 |
nbsEfmOamIfIndexifIndex from the MIB-II Interface Table for this OAM interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.2 |
nbsEfmOamPeerIfIndexifIndex from the MIB-II Interface Table for the physical port on the other side of the OAM link. For example, if this table entry corresponds to a local OAM device, this object would hold the ifIndex of the remote port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.3 |
nbsEfmOamModeA GET operation returns the current mode of the OAM sublayer entity (see 57.2.6), either passive or active. A SET operation changes the mode of operation of the OAM entity to the indicated value. A SET operation shall have no effect on a device whose mode cannot be changed through management or that can only operate in a single mode.ro Enumeration .1.3.6.1.4.1.629.300.1.3.1.1.4 |
nbsEfmOamCfgA string of three bits corresponding to the OAM Configuration field (see Table 57-7) in the most recently received Information OAMPDU. The first bit corresponds to the OAM Mode bit in the OAM Configuration field. The second bit corresponds to the Unidirectional Support bit in the OAM Configuration field. The third bit corresponds to the Loopback Support bit in the OAM Configuration field. This value is updated on reception of a valid frame, with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in Table 43B-3, (4) the OAM code equals the OAM Information code.ro OCTET STRING .1.3.6.1.4.1.629.300.1.3.1.1.5 |
nbsEfmOamPduCfgAn eleven bit value corresponding to the Maximum PDU Size value within the OAMPDU Configuration field (see Table 57-8) in the most recently sent Information OAMPDU. This value is updated on reception of a valid frame, with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in Table 43B-3, (4) the OAM code equals the OAM Information code.ro Unsigned16 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.6 |
nbsEfmOamFlagsFieldA string of five bits corresponding to the Flags field (see Table 57-3) in the most recently transmitted OAMPDU. The first bit corresponds to the Link Fault bit in the Flags field. The second bit corresponds to the Dying Gasp bit in the Flags field. The third bit corresponds to the Critical Event bit in the Flags field. The fourth bit corresponds to the Remote Stable bit in the Flags field. The fifth bit corresponds to the Local Stable bit in the Flags field.ro OCTET STRING .1.3.6.1.4.1.629.300.1.3.1.1.7 |
nbsEfmOamStateA string of three bits corresponding to the State field (see Table 57-6) of the most recently sent Information OAMPDU. The first and second bits corresponds to the Parser Action bits in the State field. The third bit corresponds to the Multiplexer Action bit in the State field. This value is updated on reception of a valid frame, with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in Table 43B-3, (4) a OAMPDU code equal to the Information code as specified in Table 57-4.ro OCTET STRING .1.3.6.1.4.1.629.300.1.3.1.1.8 |
nbsEfmOamVendorOUIThe value of the OUI variable in the Vendor Identifier field (see Table 57-9) of the most recently sent Information OAMPDU. This value is updated on reception of a valid frame, with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in Table 43B-3, (4) a OAMPDU code equal to the Information code as specified in Table 57-4.ro OCTET STRING .1.3.6.1.4.1.629.300.1.3.1.1.9 |
nbsEfmOamVendorDeviceIdThe value of the Device Identifier variable in the Vendor Identifier field (see Table 57-9) of the most recently sent Information OAMPDU. This value is updated on reception of a valid frame, with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in Table 43B-3, (4) a OAMPDU code equal to the Information code as specified in Table 57-4.ro Unsigned16 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.10 |
nbsEfmOamVendorDeviceVersionThe value of the Version Identifier variable in the Vendor Identifier field (see Table 57-9) of the most recently sent Information OAMPDU. This value is updated on reception of a valid frame, with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in Table 43B-3, (4) a OAMPDU code equal to the Information code as specified in Table 57-4.ro Unsigned16 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.11 |
nbsEfmOamPDUTxA count of OAMPDUs passed to the OAM subordinate sublayer for transmission. This counter is incremented when a OAM:MA_DATA.request service service primitive is generated within the OAM sublayer.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.12 |
nbsEfmOamPDURxA count of OAMPDUs passed by the OAM subordinate sublayer to the OAM sublayer. This counter is incremented on reception of a valid frame with (1) a destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in Table 43B-3.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.13 |
nbsEfmOamUnsupportedCodesRxA count of OAMPDUs received that contain an OAM code from Table 57-4 that are not supported by the device. This counter is incremented on reception of a valid frame with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in Table 43B-3, (4) an OAM code for a function that is not supported by the device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.14 |
nbsEfmOamInformationTxA count of OAMPDUs passed to the OAM subordinate sublayer for transmission that contain the OAM Information code specified in Table CROSS REF 57-4. This counter is incremented when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAM code indicating an OAM Information operation.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.15 |
nbsEfmOamInformationRxA count of OAMPDUs received that contain the OAM Information code specified in Table 57-4. This counter is incremented on reception of a valid frame with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in Table 43B-3, (4) an OAM code for a function that is not supported by the device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.16 |
nbsEfmOamEventNotificationTxA count of OAMPDUs passed to the OAM subordinate sublayer for transmission that contain the Event Notification code specified in Table 57-4. This counter is incremented when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAM code indicating an Event Notification operation.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.17 |
nbsEfmOamUniEventNotificationRxA count of the OAMPDUs received that contain the Event Notification code specified in Table 57-4. This counter is incremented on reception of a valid frame, with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in CROSS REF Table 43B-3, (4) the OAM code equals the Event Notification code, (5) the Sequence Number field is not equal to the Sequence Number field of the last received Event Notification OAMPDU and is supported by the device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.18 |
nbsEfmOamDupEventNotificationRxA count of the OAMPDUs received that contain the Event Notification code specified in Table 57-4. This counter is incremented on reception of a valid frame, with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in CROSS REF Table 43B-3, (4) the OAM code equals the Event Notification code, (5) the Sequence Number field is equal to the Sequence Number field of the last received Event Notification OAMPDU.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.19 |
nbsEfmOamLoopbackControlTxA count of OAMPDUs passed to the OAM subordinate sublayer for transmission that contain the Loopback Control code specified in Table 57-4. This counter is incremented when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAM code indicating a Loopback Control operation.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.20 |
nbsEfmOamLoopbackControlRxA count of OAMPDUs received that contain the Loopback Control code specified in Table 57-4. This counter is incremented on reception of a valid frame, with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in Table 43B-3, (4) the OAM code equals the Loopback Control code and is supported by the device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.21 |
nbsEfmOamVariableRequestTxA count of OAMPDUs passed to the OAM subordinate sublayer for transmission that contain the Variable Request code specified in Table 57-4. This counter is incremented when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAM code indicating a Variable Request operation.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.22 |
nbsEfmOamVariableRequestRxA count of OAMPDUs received that contain the Variable Request code specified in Table 57-4. This counter is incremented on reception of a valid frame, with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in Table 43B-3, (4) the OAM code equals the Variable Request code and is supported by the device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.23 |
nbsEfmOamVariableResponseTxA count of OAMPDUs passed to the OAM subordinate sublayer for transmission that contain the Variable Response code specified in Table 57-4. This counter is incremented when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAM code indicating a Variable Response operation.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.24 |
nbsEfmOamVariableResponseRxA count of OAMPDUs received that contain the Variable Response code specified in Table 57-4. This counter is incremented on reception of a valid frame, with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in Table 43B-3, (4) the OAM code equals the Variable Response code and is supported by the device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.25 |
nbsEfmOamOrganizationSpecificTxA count of Organization Specific OAMPDUs passed to the OAM subordinate sublayer for transmission that contain the Organization Specific code specified in Table 57-4. This counter is incremented when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAM code indicating a Organization Specific operation.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.26 |
nbsEfmOamOrganizationSpecificRxA count of OAMPDUs received that contain the Organization Specific code specified in Table 57-4. This counter is incremented on reception of a valid frame, with (1) destinationField equal to the reserved multicast address for Slow_Protocols specified in CROSS REF Table 43B-1, (2) lengthOrType field value equal to the reserved Type for Slow_Protocols as specified in CROSS REF Table 43B-2, (3) a Slow_Protocols subtype value equal to the subtype reserved for OAM as specified in Table 43B-3, (4) the OAM code equals the Organization Specific code and is supported by the device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.27 |
nbsEfmOamErrSymPerCfgDurationAn eight-octet value indicating the duration of the Errored Symbol Period Event (see 57.5.3.1) window, in terms of symbols.ro Unsigned64 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.28 |
nbsEfmOamErrSymPerCfgThreshldA four-octet value indicating the number of errored symbols in the period that must be exceeded in order for the Errored Symbol Period Event to be generated.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.29 |
nbsEfmOamErrSymPerEvtTimeAn integer corresponding to the Event Time Stamp field in the most recently transmitted Errored Symbol Period Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Symbol Period Event value as specified in Table 57-10.ro Unsigned16 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.30 |
nbsEfmOamErrSymPerEvtWindowAn integer corresponding to the Errored Symbol Window field in the most recently transmitted Errored Symbol Period Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Symbol Period Event value as specified in Table 57-10.ro Unsigned64 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.31 |
nbsEfmOamErrSymPerEvtThreshldAn integer corresponding to the Errored Symbol Threshold field in the most recently transmitted Errored Symbol Period Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Symbol Period Event value as specified in Table 57-10.ro Unsigned64 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.32 |
nbsEfmOamErrSymPerEvtCountAn integer corresponding to the Error Running Total field in the most recently transmitted Errored Symbol Period Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Symbol Period Event value as specified in Table 57-10.ro Counter64 .1.3.6.1.4.1.629.300.1.3.1.1.33 |
nbsEfmOamErrFrmCfgDurationA four-octet value indicating the duration of the Errored Frame Event (see 57.5.3.2) window, in terms of number of 100ms intervals.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.34 |
nbsEfmOamErrFrmCfgThreshldA four-octet field indicating the number of errored frames in the period that must be exceeded in order for the Errored Frame Event to be generated.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.35 |
nbsEfmOamErrFrmEvtTimeAn integer corresponding to the Event Time Stamp field in the most recently transmitted Errored Frame Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Frame Event value as specified in Table 57-10.ro Unsigned16 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.36 |
nbsEfmOamErrFrmEvtWindowAn integer corresponding to the Errored Frame Window field in the most recently transmitted Errored Frame Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Frame Event value as specified in Table 57-10.ro Unsigned16 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.37 |
nbsEfmOamErrFrmEvtThreshldAn integer corresponding to the Errored Frame Threshold field in the most recently transmitted Errored Frame Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Frame Event value as specified in Table 57-10.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.38 |
nbsEfmOamErrFrmEvtCountAn integer corresponding to the Error Running Total field in the most recently transmitted Errored Frame Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Frame Event value as specified in Table 57-10.ro Counter64 .1.3.6.1.4.1.629.300.1.3.1.1.39 |
nbsEfmOamErrFrmPerCfgDurationA four-octet value indicating the duration of the Errored Frame Period Event (see 57.5.3.3) window, in terms of the number of minFrameSize frames that can be transmitted on the underlying physical layer.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.40 |
nbsEfmOamErrFrmPerCfgThreshldA four-octet value indicating the number of errored frames in the period that must be exceeded in order for the Errored Frame Period Event to be generated.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.41 |
nbsEfmOamErrFrmPerEvtTimeAn integer corresponding to the Event Time Stamp field in the most recently transmitted Errored Frame Period Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Frame Period Event value as specified in Table 57-10.ro Unsigned16 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.42 |
nbsEfmOamErrFrmPerEvtWindowAn integer corresponding to the Errored Frame Window field in the most recently transmitted Errored Frame Period Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Frame Period Event value as specified in Table 57-10.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.43 |
nbsEfmOamErrFrmPerEvtThreshldAn integer corresponding to the Errored Frame Threshold field in the most recently transmitted Errored Frame Period Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Frame Period Event value as specified in Table 57-10.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.44 |
nbsEfmOamErrFrmPerEvtCountAn integer corresponding to the Error Running Total field in the most recently transmitted Errored Frame Period Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Frame Period Event value as specified in Table 57-10.ro Counter64 .1.3.6.1.4.1.629.300.1.3.1.1.45 |
nbsEfmOamErrFrmSecSumCfgDurationA two-octet value indicating the duration of the Errored Frame Seconds Summary Event (see 57.5.3.4) window, in terms of number of 100ms intervals.ro Unsigned16 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.46 |
nbsEfmOamErrFrmSecSumCfgThreshldA two-octet value indicating the number of errored frame seconds in the period that must be exceeded in order for the Errored Frame Seconds Summary Event to be generated.ro Unsigned16 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.47 |
nbsEfmOamErrFrmSecSumEvtTimeAn integer corresponding to the Event Time Stamp field in the most recently transmitted Errored Frame Seconds Summary Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Frame Seconds Summary Event value as specified in Table 57-10.ro Unsigned16 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.48 |
nbsEfmOamErrFrmSecSumEvtWindowAn integer corresponding to the Errored Frame Seconds Window field in the most recently transmitted Errored Frame Seconds Summary Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Frame Seconds Summary Event value as specified in Table 57-10.ro Unsigned16 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.49 |
nbsEfmOamErrFrmSecSumEvtThreshldAn integer corresponding to the Errored Frame Seconds Threshold field in the most recently transmitted Errored Frame Seconds Summary Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Frame Seconds Summary Event value as specified in Table 57-10.ro Unsigned16 (NBS-MIB) .1.3.6.1.4.1.629.300.1.3.1.1.50 |
nbsEfmOamErrFrmSecSumEvtCountAn integer corresponding to the Error Running Total field in the most recently transmitted Errored Frame Seconds Summary Event TLV in an Event Notification OAMPDU (see 57.4.3.2). This integer is updated when a OAM:MA_DATA.request service primitive is generated within the OAM sublayer with an OAMPDU Code field value equal to the Event Notification code as specified in Table 57-4 and Event TLV Type field equal to the Errored Frame Seconds Summary Event value as specified in Table 57-10.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.51 |
nbsEfmOamFramesLostDueToOamErrorA count of frames that would otherwise be transmitted by the OAM sublayer, but could not be due to an internal OAM sublayer transmit error. If this counter is incremented, then none of the other counters in this section are incremented. The exact meaning and mechanism for incrementing this counter is implementation dependent.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.52 |
nbsEfmOamAdminStateA value that identifies the operational state of the OAM sublayer. An interface which can provide the OAM sublayer functions specified in Clause 57 will be enabled to do so when this attribute has the enumeration enable(3). When this attribute has the enumeration disable(2) the interface will act as it would if it had no OAM sublayer.rw Enumeration .1.3.6.1.4.1.629.300.1.3.1.1.53 |
nbsEfmOamOperStateThis object declares configurable (*) and operational reasons for disabling OAM service. The reason applies only if the bit is set. Multiple bits may be set concurrently. OAM service is enabled when no bits are set. Bit Reason to disable --- ---------------------------------------------- 0 reserved 1 reserved 2 reserved 3 reserved 4 reserved 5 Temporarily disabled for download processing 6 Administratively disabled (*) 7 OAM service is not available OCTET STRING bitmasks count the leftmost bit (MSB) as 0.ro OCTET STRING .1.3.6.1.4.1.629.300.1.3.1.1.54 |
nbsEfmProduct OBJECT IDENTIFIER .1.3.6.1.4.1.629.300.2 |
nbsEfmNc316Nm OBJECT IDENTIFIER .1.3.6.1.4.1.629.300.2.1 |
nbsEfmConformance OBJECT IDENTIFIER .1.3.6.1.4.1.629.300.3 |
nbsEfmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.629.300.3.1 |
nbsEfmOamGroupOAM attributes. Unknown .1.3.6.1.4.1.629.300.3.1.3 |