NBS-CONNECTIVITY-MIB
The NBS-CONNECTIVITY-MIB provides read-only access to the status and configuration of externally linked ports on NBS (Network Business Solutions) hardware, enabling the monitoring of physical interface connectivity states and link associations.
Imported Objects
Objects
16 total| Object Name |
|---|
nbsConnectivityMibRead-only MIB which lists externally linked ports MODULE-IDENTITY .1.3.6.1.4.1.629.238 |
nbsConnectivityGrpConnectivity information OBJECT IDENTIFIER .1.3.6.1.4.1.629.238.1 |
nbsConnectivityTableList of externally connected port pairs. The connectivity table entries come from discovery protocols. SEQUENCE OF NbsConnectivityEntry .1.3.6.1.4.1.629.238.1.1 |
nbsConnectivityEntryContains a description of a particular Port Connection. NbsConnectivityEntry .1.3.6.1.4.1.629.238.1.1.1 |
nbsConnectivitySourceIfIndexMIB II Interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.238.1.1.1.10 |
nbsConnectivityOrdinalIndexThe ordinal index for this entry. A given source port may have one or more destination ports. INTEGER .1.3.6.1.4.1.629.238.1.1.1.11 |
nbsConnectivityDestIfIndexMIB II Interface index.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.629.238.1.1.1.20 |
nbsConnectivityDestIPAddressDeprecated. IPv4 information is in nbsConnectivityDestAddr instead.rodeprecated IpAddress .1.3.6.1.4.1.629.238.1.1.1.30 |
nbsConnectivityDestAddrTypeThe address type of nbsConnectivityDestAddr. Currently ipv4 and ipv6 are supported.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.629.238.1.1.1.40 |
nbsConnectivityDestAddrIP Address (Usually IPv4) of the remote port's SNMP agentro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.629.238.1.1.1.50 |
nbsConnectivityStatusThis object is used to indicate the link status.ro Enumeration .1.3.6.1.4.1.629.238.1.1.1.60 |
nbsConnectivityDestV6AddrTypeThe address type of nbsConnectivityDestV6Addr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.629.238.1.1.1.70 |
nbsConnectivityDestV6AddrIP Address (Usually IPv6) of the remote port's SNMP agentro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.629.238.1.1.1.80 |
nbsConnectivityTrapsSNMP Traps or Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.629.238.100 |
nbsConnectivityEventEvent Notification Definitions OBJECT IDENTIFIER .1.3.6.1.4.1.629.238.100.0 |
nbsConnectivityChangedSent after the port goes up or down. This Notification is of severity ERROR, which means it should be emitted unless disabled or nbsCmmcSysTrapTblEntLevel is set to a severity worse than error(3). NOTIFICATION-TYPE .1.3.6.1.4.1.629.238.100.0.10 |
More MIBs from Nbase
Browse all NbaseMIBs →SNMP MIB module
The NBS-COHERENT-MIB module enables monitoring of Coherent CFP (Common Form Factor Pluggable) optical transceiver parameters, including optical power levels, temperature, bias current, and voltage, on network interface cards supporting the Coherent CFP form factor.
Standard SNMP MIB module defining data structures for RT-CFG-MIB.
Standard SNMP MIB module defining data structures for NBASE-G1-MIB.
SNMP MIB module
The NBS-SLA-MIB module enables the monitoring and management of Service Level Agreement (SLA) performance metrics, such as latency, jitter, packet loss, and availability, for network services within NBS (Nortel Broadband Services) infrastructure. It facilitates the collection of SLA violation data and compliance status to support automated quality-of-service assurance and reporting.