Montclair-MIB
AI MIB Summary
The Montclair-MIB module facilitates SNMP-based monitoring of Montclair hardware fan status and operational metrics, specifically tracking fan presence and airflow quantities. This module enables systems administrators to detect fan failures or anomalies by polling corrected object names for fan counts and amounts.
'Number' changed to 'Amount', 'Fans' changed to 'Fan' in object names; DESCRIPTIONs correction
Main OID:
Montclair.1.3.6.1.4.1.1385
91
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
91 total| Object Name |
|---|
Montclair'Number' changed to 'Amount', 'Fans' changed to 'Fan' in object names; DESCRIPTIONs correction MODULE-IDENTITY .1.3.6.1.4.1.1385 |
mainInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1385.1 |
deviceVendordeviceVendorro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1385.1.1 |
devicePartNumberModel full info (P/N)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1385.1.2 |
deviceSerialNumberDevice Serial Numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1385.1.3 |
deviceFirmwareVersionFirmware versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1385.1.4 |
networkConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1385.3 |
netDHCPConfigDHCP Client Configuration:
1 - Off,
2 - Onrw Enumeration .1.3.6.1.4.1.1385.3.1 |
netConfigIPAddressDevice IP Addressrw IpAddress .1.3.6.1.4.1.1385.3.2 |
netConfigSubnetMaskDevice Subnet Maskrw IpAddress .1.3.6.1.4.1.1385.3.3 |
netDefaultGatewayDefault Gatewayrw IpAddress .1.3.6.1.4.1.1385.3.4 |
netMACAddressDevice MAC Addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1385.3.5 |
networkSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.1385.5 |
netSNMPServer1IPAddressIP Address of SNMP (Simple Network Management
Protocol) TRAP-server #1 (primary)rw IpAddress .1.3.6.1.4.1.1385.5.1 |
netSNMPServer2IPAddressIP Address of SNMP (Simple Network Management
Protocol) TRAP-server #2 (backup)rw IpAddress .1.3.6.1.4.1.1385.5.2 |
netSNMPServer3IPAddressIP Address of SNMP (Simple Network Management
Protocol) TRAP-server #3 (backup)rw IpAddress .1.3.6.1.4.1.1385.5.3 |
netSNMPServer4IPAddressIP Address of SNMP (Simple Network Management
Protocol) TRAP-server #4 (backup)rw IpAddress .1.3.6.1.4.1.1385.5.4 |
netSNMPTrustedIP1IP Address of SNMP Trusted IP #1 (primary)rw IpAddress .1.3.6.1.4.1.1385.5.5 |
netSNMPTrustedIP2IP Address of SNMP Trusted IP #2rw IpAddress .1.3.6.1.4.1.1385.5.6 |
netSNMPTrustedIP3IP Address of SNMP Trusted IP #3rw IpAddress .1.3.6.1.4.1.1385.5.7 |
netSNMPTrustedIP4IP Address of SNMP Trusted IP #4rw IpAddress .1.3.6.1.4.1.1385.5.8 |
netSNMPCommunityReadSNMP Read Communityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1385.5.9 |
netSNMPCommunityWriteSNMP Read/Write Communityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1385.5.10 |
networkLLDP OBJECT IDENTIFIER .1.3.6.1.4.1.1385.7 |
netLLDPEnabledLLDP Enabled/Disabledrw Integer32 .1.3.6.1.4.1.1385.7.1 |
netLLDPPeriodLLDP Message Transmission Periodrw Integer32 .1.3.6.1.4.1.1385.7.2 |
netLLDPRemoteMACDetected Remote Port MAC Addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1385.7.3 |
netLLDPRemotePortIDDetected Remote Port Identifier (ID)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1385.7.4 |
netLLDPRemotePortDescDetected Remote Port Descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1385.7.5 |
mainConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1385.9 |
devicesConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1385.9.77 |
deviceTime OBJECT IDENTIFIER .1.3.6.1.4.1.1385.11 |
netTimeServerIPAddressIP Address of SNTP:
Simple Network Time Protocol -
Time Serverrw IpAddress .1.3.6.1.4.1.1385.11.1 |
deviceUNIXTimeCurrent Time in UNIX(POSIX) Time Notation
(Seconds elapsed since 00:00:00,
1 Jan 1970 UTCro Integer32 .1.3.6.1.4.1.1385.11.2 |
deviceTimeZoneLocal Time Zone (The offset from
Coordinated Universal Time (UTC)), minutesrw Integer32 .1.3.6.1.4.1.1385.11.3 |
deviceDateTimeDateTime, stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1385.11.4 |
deviceOperationTimeSummary Operation time, secondsro Gauge32 .1.3.6.1.4.1.1385.11.5 |
deviceStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1385.12 |
statusDevice Common Statusro Enumeration .1.3.6.1.4.1.1385.12.1 |
deviceInternalTemperatuteCase Temperatute, degreero Integer32 .1.3.6.1.4.1.1385.12.2 |
devicePowerSupplyAmountPowerSupply Amountro Integer32 .1.3.6.1.4.1.1385.12.3 |
devicePowerSupply1StatusPowerSupply1 Statusro Enumeration .1.3.6.1.4.1.1385.12.4 |
devicePowerSupply2StatusPowerSupply2 Statusro Enumeration .1.3.6.1.4.1.1385.12.5 |
deviceFanAmountFans Amountro Integer32 .1.3.6.1.4.1.1385.12.6 |
deviceFanStatusFans statusro Enumeration .1.3.6.1.4.1.1385.12.7 |
deviceFanModeFan Operation Mode:
auto(1); manual(2) - forced set value;
low(3), linear(4) or high(5) - the current condition of automatic fan mode operationro Enumeration .1.3.6.1.4.1.1385.12.8 |
deviceFun1SpeedFan1 Speed, RPMro Integer32 .1.3.6.1.4.1.1385.12.9 |
deviceFun2SpeedFan2 Speed, RPMro Integer32 .1.3.6.1.4.1.1385.12.10 |
deviceFun3SpeedFan3 Speed, RPMro Integer32 .1.3.6.1.4.1.1385.12.11 |
deviceSetting OBJECT IDENTIFIER .1.3.6.1.4.1.1385.13 |
deviceFanModeSetdeviceFanMode, Auto Mode On/Offrw Enumeration .1.3.6.1.4.1.1385.13.1 |
deviceFanPowerSetdeviceFanPowerSet, Set Value of Fan Air Flow for Manual Mode, %rw Integer32 .1.3.6.1.4.1.1385.13.2 |
deviceFanMinimumSetdeviceFanMinimum, Min Value of Fan Air Flow for Auto Mode, %rw Integer32 .1.3.6.1.4.1.1385.13.3 |
deviceFanMaximumSetPFanMax, Max Value of Fan Air Flow for Auto Mode, %rw Integer32 .1.3.6.1.4.1.1385.13.4 |
deviceFanTemperatureLowThrSetTCaseMin, Min Value of Case Temperature for Auto Mode, centigrade degreerw Integer32 .1.3.6.1.4.1.1385.13.5 |
deviceFanTemperatureHighThrSetTCaseMax, Max Value of Case Temperature for Auto Mode, centigrade degreerw Integer32 .1.3.6.1.4.1.1385.13.6 |
mainDevices OBJECT IDENTIFIER .1.3.6.1.4.1.1385.77 |
amplifier OBJECT IDENTIFIER .1.3.6.1.4.1.1385.77.7 |
amplifierDynamic OBJECT IDENTIFIER .1.3.6.1.4.1.1385.77.7.2 |
opticalSwitchInput1PowerInputPower1*10, input 1 optical power, dBm*10.
For example, value -12 means the input 1 optical power is -1.2 dBm.ro Integer32 .1.3.6.1.4.1.1385.77.7.2.1 |
opticalSwitchInput2PowerInput2Power*10, input 2 optical power, dBm*10.
For example, value 35 means the input 1 optical power is 3.5 dBm.ro Integer32 .1.3.6.1.4.1.1385.77.7.2.2 |
opticalSwitchActiveInputActive Optical Input:
pin1(1) - input 1;
pin2(2) - input 2;
pass(3) - have one inputro Enumeration .1.3.6.1.4.1.1385.77.7.2.3 |
amplifierBackReflectionPowerBackReflectionPower*10, BackReflectionPower Optical Power, dBm*10.
Monitoring of backward optical power. Sensor measure full backward incoming power in dBm.
For example, value -378 means the backwar incomind amplifier is -37.8 dBm.ro Integer32 .1.3.6.1.4.1.1385.77.7.2.4 |
amplifierInputPowerInputPower*10, Amplifier Input Optical Power, dBm*10.
For example, value 23 means the input optical power is 2.3 dBm.ro Integer32 .1.3.6.1.4.1.1385.77.7.2.5 |
amplifierEnabledAmpEnable, Amplifier pump current On/Offro Enumeration .1.3.6.1.4.1.1385.77.7.2.6 |
amplifierModeAmplifier stabilization mode:
acc(1) - amplifier pump current stabilization mode;
apc(2) - amplifier output power stabilization mode;
agc(3) - amplifier gain stabilization modero Enumeration .1.3.6.1.4.1.1385.77.7.2.7 |
amplifierPrePumpCurrentPrePumpCurrent, Preliminary Pump Current, %ro Integer32 .1.3.6.1.4.1.1385.77.7.2.8 |
amplifierPumpCurrent1PumpCurrent1, Amplifier Pump Current 1, %ro Integer32 .1.3.6.1.4.1.1385.77.7.2.9 |
amplifierPumpCurrent2PumpCurrent2, Amplifier Pump Current 2, %ro Integer32 .1.3.6.1.4.1.1385.77.7.2.10 |
amplifierOutputPowerPout*10, Output optical power, dBm*10ro Integer32 .1.3.6.1.4.1.1385.77.7.2.11 |
amplifierGainGain, Amlifier gain, dB*10ro Integer32 .1.3.6.1.4.1.1385.77.7.2.12 |
amplifierPortAmountPortAmount (PortsNumber), pcsro Integer32 .1.3.6.1.4.1.1385.77.7.2.13 |
amplifierPortOutputPowerPortOutputPower, Amlifier PortOutputPower, dBm*10ro Integer32 .1.3.6.1.4.1.1385.77.7.2.14 |
amplifierPortGainGain per Port, Calculated from InputPower and PortOutputPower, dB*10ro Integer32 .1.3.6.1.4.1.1385.77.7.2.15 |
amplifierRadiatorTemperatureRadiatorTemperature, Main Radiator Temperature, centigrade degreero Integer32 .1.3.6.1.4.1.1385.77.7.2.16 |
amplifierPrePumpTemperaturePrePumpTemperature*10, Pre Pump Diod TEC Temperature, centigrade degree*10ro Integer32 .1.3.6.1.4.1.1385.77.7.2.17 |
amplifierAPSbyInputPoweramplifierAPSbyInputPowerro Integer32 .1.3.6.1.4.1.1385.77.7.2.18 |
amplifierAPSbyBackReflectionamplifierAPSbyBackReflectionro Integer32 .1.3.6.1.4.1.1385.77.7.2.19 |
amplifierAPSbyTemperatureamplifierAPSbyTemperaturero Integer32 .1.3.6.1.4.1.1385.77.7.2.20 |
amplifierSetting OBJECT IDENTIFIER .1.3.6.1.4.1.1385.77.7.3 |
opticalSwitchModeSetSwitching Operation Moderw Enumeration .1.3.6.1.4.1.1385.77.7.3.1 |
opticalSwitchDeltaSetMaximum |Pin1-Pin2| Difference for Optical Switch Commutation, dBrw Integer32 .1.3.6.1.4.1.1385.77.7.3.2 |
amplifierAPSSetamplifier APS Set, Amplifier Automatic Power Shotdown Mode On/Offro Enumeration .1.3.6.1.4.1.1385.77.7.3.3 |
amplifierModeSetAmplifier Stabilization Mode,
acc(1) - Amplifier Current Stabilization Mode,
apc(2) - Amplifier Pout Stabilization Mode,
agc(3) - Amplifier Gain Stabilization Modero Enumeration .1.3.6.1.4.1.1385.77.7.3.4 |
amplifierPrePumpCurrentSetamplifierPrePumpCurrentSet, Set Value of Preliminary Pump Laser Diode Current, mAro Integer32 .1.3.6.1.4.1.1385.77.7.3.5 |
amplifierPumpCurrent1SetamplifierPumpCurrent1Set, Set Value of Amplifier Laser Diode Pump Current, mArw Integer32 .1.3.6.1.4.1.1385.77.7.3.6 |
amplifierPumpCurrent2SetamplifierPumpCurrent2Set, Set Value of Amplifier Laser Diode Pump Current, mArw Integer32 .1.3.6.1.4.1.1385.77.7.3.7 |
amplifierOutputPowerSetamplifierOutputPowerSet*10, Set Value of Output Optical Power, dBm*10rw Integer32 .1.3.6.1.4.1.1385.77.7.3.8 |
amplifierGainSetamplifierGainSet*10, Set Value of Output Optical Power, dBm*10rw Integer32 .1.3.6.1.4.1.1385.77.7.3.9 |
amplifierPortOutputPowerSetamplifierPortOutputPowerSet*10, Set Value of Output Optical Power, dBm*10rw Integer32 .1.3.6.1.4.1.1385.77.7.3.10 |
amplifierPortGainSetamplifierPortGainSet*10, Set Value of Output Optical Power, dBm*10rw Integer32 .1.3.6.1.4.1.1385.77.7.3.11 |