MRV-EFM-MIB
Private MRV MIB for representing 802.3ah (Ethernet in the First Mile) information
Main OID:
mrvEfmMib.1.3.6.1.4.1.629.300
63
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
63 total| Object Name |
|---|
mrvEfmMibPrivate MRV MIB for representing 802.3ah (Ethernet in the
First Mile) information MODULE-IDENTITY .1.3.6.1.4.1.629.300 |
mrvEfmObjectsall MIB objects in mrvEfm MIB. OBJECT IDENTIFIER .1.3.6.1.4.1.629.300.1 |
mrvEfmOamGrpAll OAM objects. OBJECT IDENTIFIER .1.3.6.1.4.1.629.300.1.3 |
mrvEfmOamTableOperations, Administration, and Management information SEQUENCE OF MrvEfmOamEntry .1.3.6.1.4.1.629.300.1.3.1 |
mrvEfmOamEntryContains a desription of a particular Oam. There are two
entries for each OAM link, one entry for the local side,
one for the remote. MrvEfmOamEntry .1.3.6.1.4.1.629.300.1.3.1.1 |
mrvEfmPhysicalIfIndexifIndex from the MIB-II Interface Table for the physical
port on which this OAM traffic flows.ro InterfaceIndex .1.3.6.1.4.1.629.300.1.3.1.1.1 |
mrvEfmOamIfIndexifIndex from the MIB-II Interface Table for this OAM
interface.ro InterfaceIndex .1.3.6.1.4.1.629.300.1.3.1.1.2 |
mrvEfmOamPeerIfIndexifIndex from the MIB-II Interface Table for the physical
port on the other side of the OAM link. For
example, if this table entry corresponds to a local
OAM device, this object would hold the ifIndex of the
remote port.ro InterfaceIndex .1.3.6.1.4.1.629.300.1.3.1.1.3 |
mrvEfmOamModeA GET operation returns the current mode of the OAM
sublayer entity (see 57.2.6), either passive or
active. A SET operation changes the mode of operation
of the OAM entity to the indicated value. A SET
operation shall have no effect on a device whose mode
cannot be changed through management or that can only
operate in a single mode.ro Enumeration .1.3.6.1.4.1.629.300.1.3.1.1.4 |
mrvEfmOamCfgA string of three bits corresponding to the OAM
Configuration field (see Table 57-7) in the most recently
received Information OAMPDU. The first bit corresponds to
the OAM Mode bit in the OAM Configuration field. The
second bit corresponds to the Unidirectional Support bit
in the OAM Configuration field. The third bit corresponds
to the Loopback Support bit in the OAM Configuration
field.
This value is updated on reception of a valid frame, with
(1) destinationField equal to the reserved multicast
address for Slow_Protocols specified in CROSS REF Table
43B-1, (2) lengthOrType field value equal to the reserved
Type for Slow_Protocols as specified in CROSS REF Table
43B-2, (3) a Slow_Protocols subtype value equal to the
subtype reserved for OAM as specified in Table 43B-3, (4)
the OAM code equals the OAM Information code.ro OCTET STRING .1.3.6.1.4.1.629.300.1.3.1.1.5 |
mrvEfmOamPduCfgAn eleven bit value corresponding to the Maximum PDU Size
value within the OAMPDU Configuration field (see Table
57-8) in the most recently sent Information OAMPDU.
This value is updated on reception of a valid frame, with
(1) destinationField equal to the reserved multicast
address for Slow_Protocols specified in CROSS REF Table
43B-1, (2) lengthOrType field value equal to the reserved
Type for Slow_Protocols as specified in CROSS REF Table
43B-2, (3) a Slow_Protocols subtype value equal to the
subtype reserved for OAM as specified in Table 43B-3, (4)
the OAM code equals the OAM Information code.ro Unsigned16 .1.3.6.1.4.1.629.300.1.3.1.1.6 |
mrvEfmOamFlagsFieldA string of five bits corresponding to the Flags field
(see Table 57-3) in the most recently transmitted OAMPDU.
The first bit corresponds to the Link Fault bit in the
Flags field. The second bit corresponds to the Dying Gasp
bit in the Flags field. The third bit corresponds to the
Critical Event bit in the Flags field. The fourth bit
corresponds to the Remote Stable bit in the Flags field.
The fifth bit corresponds to the Local Stable bit in the
Flags field.ro OCTET STRING .1.3.6.1.4.1.629.300.1.3.1.1.7 |
mrvEfmOamStateA string of three bits corresponding to the State field
(see Table 57-6) of the most recently sent Information
OAMPDU. The first and second bits corresponds to the
Parser Action bits in the State field. The third bit
corresponds to the Multiplexer Action bit in the State
field.
This value is updated on reception of a valid frame, with
(1) destinationField equal to the reserved multicast
address for Slow_Protocols specified in CROSS REF Table
43B-1, (2) lengthOrType field value equal to the reserved
Type for Slow_Protocols as specified in CROSS REF Table
43B-2, (3) a Slow_Protocols subtype value equal to the
subtype reserved for OAM as specified in Table 43B-3, (4)
a OAMPDU code equal to the Information code as specified
in Table 57-4.ro OCTET STRING .1.3.6.1.4.1.629.300.1.3.1.1.8 |
mrvEfmOamVendorOUIThe value of the OUI variable in the Vendor Identifier
field (see Table 57-9) of the most recently sent
Information OAMPDU.
This value is updated on reception of a valid frame, with
(1) destinationField equal to the reserved multicast
address for Slow_Protocols specified in CROSS REF Table
43B-1, (2) lengthOrType field value equal to the reserved
Type for Slow_Protocols as specified in CROSS REF Table
43B-2, (3) a Slow_Protocols subtype value equal to the
subtype reserved for OAM as specified in Table 43B-3, (4)
a OAMPDU code equal to the Information code as specified
in Table 57-4.ro OCTET STRING .1.3.6.1.4.1.629.300.1.3.1.1.9 |
mrvEfmOamVendorDeviceIdThe value of the Device Identifier variable in the Vendor
Identifier field (see Table 57-9) of the most recently
sent Information OAMPDU.
This value is updated on reception of a valid frame, with
(1) destinationField equal to the reserved multicast
address for Slow_Protocols specified in CROSS REF Table
43B-1, (2) lengthOrType field value equal to the reserved
Type for Slow_Protocols as specified in CROSS REF Table
43B-2, (3) a Slow_Protocols subtype value equal to the
subtype reserved for OAM as specified in Table 43B-3, (4)
a OAMPDU code equal to the Information code as specified
in Table 57-4.ro Unsigned16 .1.3.6.1.4.1.629.300.1.3.1.1.10 |
mrvEfmOamVendorDeviceVersionThe value of the Version Identifier variable in the
Vendor Identifier field (see Table 57-9) of the most
recently sent Information OAMPDU.
This value is updated on reception of a valid frame, with
(1) destinationField equal to the reserved multicast
address for Slow_Protocols specified in CROSS REF Table
43B-1, (2) lengthOrType field value equal to the reserved
Type for Slow_Protocols as specified in CROSS REF Table
43B-2, (3) a Slow_Protocols subtype value equal to the
subtype reserved for OAM as specified in Table 43B-3, (4)
a OAMPDU code equal to the Information code as specified
in Table 57-4.ro Unsigned16 .1.3.6.1.4.1.629.300.1.3.1.1.11 |
mrvEfmOamPDUTxA count of OAMPDUs passed to the OAM subordinate sublayer
for transmission. This counter is incremented when a
OAM:MA_DATA.request service service primitive is generated
within the OAM sublayer.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.12 |
mrvEfmOamPDURxA count of OAMPDUs passed by the OAM subordinate sublayer
to the OAM sublayer. This counter is incremented on
reception of a valid frame with (1) a destinationField
equal to the reserved multicast address for Slow_Protocols
specified in CROSS REF Table 43B-1, (2) lengthOrType field
value equal to the reserved Type for Slow_Protocols as
specified in CROSS REF Table 43B-2, (3) a Slow_Protocols
subtype value equal to the subtype reserved for OAM as
specified in Table 43B-3.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.13 |
mrvEfmOamUnsupportedCodesRxA count of OAMPDUs received that contain an OAM code from
Table 57-4 that are not supported by the device. This
counter is incremented on reception of a valid frame with
(1) destinationField equal to the reserved multicast
address for Slow_Protocols specified in CROSS REF Table
43B-1, (2) lengthOrType field value equal to the reserved
Type for Slow_Protocols as specified in CROSS REF Table
43B-2, (3) a Slow_Protocols subtype value equal to the
subtype reserved for OAM as specified in Table 43B-3, (4)
an OAM code for a function that is not supported by the
device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.14 |
mrvEfmOamInformationTxA count of OAMPDUs passed to the OAM subordinate sublayer
for transmission that contain the OAM Information code
specified in Table CROSS REF 57-4. This counter is
incremented when a OAM:MA_DATA.request service primitive
is generated within the OAM sublayer with an OAM code
indicating an OAM Information operation.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.15 |
mrvEfmOamInformationRxA count of OAMPDUs received that contain the OAM
Information code specified in Table 57-4. This
counter is incremented on reception of a valid frame with
(1) destinationField equal to the reserved multicast
address for Slow_Protocols specified in CROSS REF Table
43B-1, (2) lengthOrType field value equal to the reserved
Type for Slow_Protocols as specified in CROSS REF Table
43B-2, (3) a Slow_Protocols subtype value equal to the
subtype reserved for OAM as specified in Table 43B-3, (4)
an OAM code for a function that is not supported by the
device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.16 |
mrvEfmOamEventNotificationTxA count of OAMPDUs passed to the OAM subordinate sublayer
for transmission that contain the Event Notification code
specified in Table 57-4. This counter is incremented when
a OAM:MA_DATA.request service primitive is generated
within the OAM sublayer with an OAM code indicating an
Event Notification operation.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.17 |
mrvEfmOamUniEventNotificationRxA count of the OAMPDUs received that contain the Event
Notification code specified in Table 57-4. This counter is
incremented on reception of a valid frame, with (1)
destinationField equal to the reserved multicast address
for Slow_Protocols specified in CROSS REF Table 43B-1, (2)
lengthOrType field value equal to the reserved Type for
Slow_Protocols as specified in CROSS REF Table 43B-2, (3)
a Slow_Protocols subtype value equal to the subtype
reserved for OAM as specified in CROSS REF Table 43B-3,
(4) the OAM code equals the Event Notification code, (5)
the Sequence Number field is not equal to the Sequence
Number field of the last received Event Notification
OAMPDU and is supported by the device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.18 |
mrvEfmOamDupEventNotificationRxA count of the OAMPDUs received that contain the Event
Notification code specified in Table 57-4. This counter is
incremented on reception of a valid frame, with (1)
destinationField equal to the reserved multicast address
for Slow_Protocols specified in CROSS REF Table 43B-1, (2)
lengthOrType field value equal to the reserved Type for
Slow_Protocols as specified in CROSS REF Table 43B-2, (3)
a Slow_Protocols subtype value equal to the subtype
reserved for OAM as specified in CROSS REF Table 43B-3,
(4) the OAM code equals the Event Notification code, (5)
the Sequence Number field is equal to the Sequence
Number field of the last received Event Notification
OAMPDU.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.19 |
mrvEfmOamLoopbackControlTxA count of OAMPDUs passed to the OAM subordinate
sublayer for transmission that contain the Loopback
Control code specified in Table 57-4. This counter is
incremented when a OAM:MA_DATA.request service primitive
is generated within the OAM sublayer with an OAM code
indicating a Loopback Control operation.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.20 |
mrvEfmOamLoopbackControlRxA count of OAMPDUs received that contain the Loopback
Control code specified in Table 57-4. This counter is
incremented on reception of a valid frame, with (1)
destinationField equal to the reserved multicast address
for Slow_Protocols specified in CROSS REF Table 43B-1, (2)
lengthOrType field value equal to the reserved Type for
Slow_Protocols as specified in CROSS REF Table 43B-2, (3)
a Slow_Protocols subtype value equal to the subtype
reserved for OAM as specified in Table 43B-3, (4) the OAM
code equals the Loopback Control code and is supported by
the device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.21 |
mrvEfmOamVariableRequestTxA count of OAMPDUs passed to the OAM subordinate sublayer
for transmission that contain the Variable Request code
specified in Table 57-4. This counter is incremented when
a OAM:MA_DATA.request service primitive is generated
within the OAM sublayer with an OAM code indicating a
Variable Request operation.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.22 |
mrvEfmOamVariableRequestRxA count of OAMPDUs received that contain the Variable
Request code specified in Table 57-4. This counter is
incremented on reception of a valid frame, with (1)
destinationField equal to the reserved multicast address
for Slow_Protocols specified in CROSS REF Table 43B-1, (2)
lengthOrType field value equal to the reserved Type for
Slow_Protocols as specified in CROSS REF Table 43B-2, (3)
a Slow_Protocols subtype value equal to the subtype
reserved for OAM as specified in Table 43B-3, (4) the OAM
code equals the Variable Request code and is supported by
the device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.23 |
mrvEfmOamVariableResponseTxA count of OAMPDUs passed to the OAM subordinate sublayer
for transmission that contain the Variable Response code
specified in Table 57-4. This counter is incremented when
a OAM:MA_DATA.request service primitive is generated
within the OAM sublayer with an OAM code indicating a
Variable Response operation.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.24 |
mrvEfmOamVariableResponseRxA count of OAMPDUs received that contain the Variable
Response code specified in Table 57-4. This counter is
incremented on reception of a valid frame, with (1)
destinationField equal to the reserved multicast address
for Slow_Protocols specified in CROSS REF Table 43B-1, (2)
lengthOrType field value equal to the reserved Type for
Slow_Protocols as specified in CROSS REF Table 43B-2, (3)
a Slow_Protocols subtype value equal to the subtype
reserved for OAM as specified in Table 43B-3, (4) the OAM
code equals the Variable Response code and is supported by
the device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.25 |
mrvEfmOamOrganizationSpecificTxA count of Organization Specific OAMPDUs passed to the
OAM subordinate sublayer for transmission that contain the
Organization Specific code specified in Table 57-4. This
counter is incremented when a OAM:MA_DATA.request service
primitive is generated within the OAM sublayer with an OAM
code indicating a Organization Specific operation.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.26 |
mrvEfmOamOrganizationSpecificRxA count of OAMPDUs received that contain the Organization
Specific code specified in Table 57-4. This counter is
incremented on reception of a valid frame, with (1)
destinationField equal to the reserved multicast address
for Slow_Protocols specified in CROSS REF Table 43B-1, (2)
lengthOrType field value equal to the reserved Type for
Slow_Protocols as specified in CROSS REF Table 43B-2, (3)
a Slow_Protocols subtype value equal to the subtype
reserved for OAM as specified in Table 43B-3, (4) the OAM
code equals the Organization Specific code and is
supported by the device.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.27 |
mrvEfmOamErrSymPerCfgDurationAn eight-octet value indicating the duration of the
Errored Symbol Period Event (see 57.5.3.1) window, in
terms of symbols.ro Unsigned64 .1.3.6.1.4.1.629.300.1.3.1.1.28 |
mrvEfmOamErrSymPerCfgThreshldA four-octet value indicating the number of errored
symbols in the period that must be exceeded in order for
the Errored Symbol Period Event to be generated.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.29 |
mrvEfmOamErrSymPerEvtTimeAn integer corresponding to the Event Time Stamp field in
the most recently transmitted Errored Symbol Period Event
TLV in an Event Notification OAMPDU (see 57.4.3.2).
This integer is updated when a OAM:MA_DATA.request
service primitive is generated within the OAM sublayer
with an OAMPDU Code field value equal to the Event
Notification code as specified in Table 57-4 and Event TLV
Type field equal to the Errored Symbol Period Event value
as specified in Table 57-10.ro Unsigned16 .1.3.6.1.4.1.629.300.1.3.1.1.30 |
mrvEfmOamErrSymPerEvtWindowAn integer corresponding to the Errored Symbol Window
field in the most recently transmitted Errored Symbol
Period Event TLV in an Event Notification OAMPDU (see
57.4.3.2).
This integer is updated when a OAM:MA_DATA.request
service primitive is generated within the OAM sublayer
with an OAMPDU Code field value equal to the Event
Notification code as specified in Table 57-4 and Event TLV
Type field equal to the Errored Symbol Period Event value
as specified in Table 57-10.ro Unsigned64 .1.3.6.1.4.1.629.300.1.3.1.1.31 |
mrvEfmOamErrSymPerEvtThreshldAn integer corresponding to the Errored Symbol Threshold
field in the most recently transmitted Errored Symbol
Period Event TLV in an Event Notification OAMPDU (see
57.4.3.2).
This integer is updated when a OAM:MA_DATA.request
service primitive is generated within the OAM sublayer
with an OAMPDU Code field value equal to the Event
Notification code as specified in Table 57-4 and Event TLV
Type field equal to the Errored Symbol Period Event value
as specified in Table 57-10.ro Unsigned64 .1.3.6.1.4.1.629.300.1.3.1.1.32 |
mrvEfmOamErrSymPerEvtCountAn integer corresponding to the Error Running Total field
in the most recently transmitted Errored Symbol Period
Event TLV in an Event Notification OAMPDU (see 57.4.3.2).
This integer is updated when a OAM:MA_DATA.request
service primitive is generated within the OAM sublayer
with an OAMPDU Code field value equal to the Event
Notification code as specified in Table 57-4 and Event TLV
Type field equal to the Errored Symbol Period Event value
as specified in Table 57-10.ro Counter64 .1.3.6.1.4.1.629.300.1.3.1.1.33 |
mrvEfmOamErrFrmCfgDurationA four-octet value indicating the duration of the Errored
Frame Event (see 57.5.3.2) window, in terms of number of
100ms intervals.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.34 |
mrvEfmOamErrFrmCfgThreshldA four-octet field indicating the number of errored
frames in the period that must be exceeded in order for
the Errored Frame Event to be generated.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.35 |
mrvEfmOamErrFrmEvtTimeAn integer corresponding to the Event Time Stamp field in
the most recently transmitted Errored Frame Event TLV in
an Event Notification OAMPDU (see 57.4.3.2). This integer
is updated when a OAM:MA_DATA.request service primitive is
generated within the OAM sublayer with an OAMPDU Code
field value equal to the Event Notification code as
specified in Table 57-4 and Event TLV Type field equal to
the Errored Frame Event value as specified in Table 57-10.ro Unsigned16 .1.3.6.1.4.1.629.300.1.3.1.1.36 |
mrvEfmOamErrFrmEvtWindowAn integer corresponding to the Errored Frame Window
field in the most recently transmitted Errored Frame
Event TLV in an Event Notification OAMPDU (see
57.4.3.2).
This integer is updated when a OAM:MA_DATA.request
service primitive is generated within the OAM sublayer
with an OAMPDU Code field value equal to the Event
Notification code as specified in Table 57-4 and Event TLV
Type field equal to the Errored Frame Event value as
specified in Table 57-10.ro Unsigned16 .1.3.6.1.4.1.629.300.1.3.1.1.37 |
mrvEfmOamErrFrmEvtThreshldAn integer corresponding to the Errored Frame Threshold
field in the most recently transmitted Errored Frame Event
TLV in an Event Notification OAMPDU (see 57.4.3.2).
This integer is updated when a OAM:MA_DATA.request
service primitive is generated within the OAM sublayer
with an OAMPDU Code field value equal to the Event
Notification code as specified in Table 57-4 and Event TLV
Type field equal to the Errored Frame Event value as
specified in Table 57-10.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.38 |
mrvEfmOamErrFrmEvtCountAn integer corresponding to the Error Running Total field
in the most recently transmitted Errored Frame Event TLV
in an Event Notification OAMPDU (see 57.4.3.2).
This integer is updated when a OAM:MA_DATA.request
service primitive is generated within the OAM sublayer
with an OAMPDU Code field value equal to the Event
Notification code as specified in Table 57-4 and Event TLV
Type field equal to the Errored Frame Event value as
specified in Table 57-10.ro Counter64 .1.3.6.1.4.1.629.300.1.3.1.1.39 |
mrvEfmOamErrFrmPerCfgDurationA four-octet value indicating the duration of the Errored
Frame Period Event (see 57.5.3.3) window, in terms of the
number of minFrameSize frames that can be transmitted on
the underlying physical layer.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.40 |
mrvEfmOamErrFrmPerCfgThreshldA four-octet value indicating the number of errored
frames in the period that must be exceeded in order for
the Errored Frame Period Event to be generated.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.41 |
mrvEfmOamErrFrmPerEvtTimeAn integer corresponding to the Event Time Stamp field
in the most recently transmitted Errored Frame Period
Event TLV in an Event Notification OAMPDU (see 57.4.3.2).
This integer is updated when a OAM:MA_DATA.request
service primitive is generated within the OAM sublayer
with an OAMPDU Code field value equal to the Event
Notification code as specified in Table 57-4 and Event TLV
Type field equal to the Errored Frame Period Event value
as specified in Table 57-10.ro Unsigned16 .1.3.6.1.4.1.629.300.1.3.1.1.42 |
mrvEfmOamErrFrmPerEvtWindowAn integer corresponding to the Errored Frame Window field
in the most recently transmitted Errored Frame Period
Event TLV in an Event Notification OAMPDU (see 57.4.3.2).
This integer is updated when a OAM:MA_DATA.request
service primitive is generated within the OAM sublayer
with an OAMPDU Code field value equal to the Event
Notification code as specified in Table 57-4 and Event TLV
Type field equal to the Errored Frame Period Event value
as specified in Table 57-10.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.43 |
mrvEfmOamErrFrmPerEvtThreshldAn integer corresponding to the Errored Frame Threshold field
in the most recently transmitted Errored Frame Period
Event TLV in an Event Notification OAMPDU (see 57.4.3.2).
This integer is updated when a OAM:MA_DATA.request
service primitive is generated within the OAM sublayer
with an OAMPDU Code field value equal to the Event
Notification code as specified in Table 57-4 and Event TLV
Type field equal to the Errored Frame Period Event value
as specified in Table 57-10.ro Unsigned32 .1.3.6.1.4.1.629.300.1.3.1.1.44 |
mrvEfmOamErrFrmPerEvtCountAn integer corresponding to the Error Running Total field
in the most recently transmitted Errored Frame Period
Event TLV in an Event Notification OAMPDU (see 57.4.3.2).
This integer is updated when a OAM:MA_DATA.request
service primitive is generated within the OAM sublayer
with an OAMPDU Code field value equal to the Event
Notification code as specified in Table 57-4 and Event TLV
Type field equal to the Errored Frame Period Event value
as specified in Table 57-10.ro Counter64 .1.3.6.1.4.1.629.300.1.3.1.1.45 |
mrvEfmOamErrFrmSecSumCfgDurationA two-octet value indicating the duration of the Errored
Frame Seconds Summary Event (see 57.5.3.4) window, in
terms of number of 100ms intervals.ro Unsigned16 .1.3.6.1.4.1.629.300.1.3.1.1.46 |
mrvEfmOamErrFrmSecSumCfgThreshldA two-octet value indicating the number of errored frame
seconds in the period that must be exceeded in order for
the Errored Frame Seconds Summary Event to be generated.ro Unsigned16 .1.3.6.1.4.1.629.300.1.3.1.1.47 |
mrvEfmOamErrFrmSecSumEvtTimeAn integer corresponding to the Event Time Stamp field
in the most recently transmitted Errored Frame Seconds
Summary Event TLV in an Event Notification OAMPDU (see
57.4.3.2). This integer is updated when a
OAM:MA_DATA.request service primitive is generated within
the OAM sublayer with an OAMPDU Code field value equal to
the Event Notification code as specified in Table 57-4 and
Event TLV Type field equal to the Errored Frame Seconds
Summary Event value as specified in Table 57-10.ro Unsigned16 .1.3.6.1.4.1.629.300.1.3.1.1.48 |
mrvEfmOamErrFrmSecSumEvtWindowAn integer corresponding to the Errored Frame Seconds
Window field in the most recently transmitted Errored
Frame Seconds Summary Event TLV in an Event Notification
OAMPDU (see 57.4.3.2). This integer is updated when a
OAM:MA_DATA.request service primitive is generated within
the OAM sublayer with an OAMPDU Code field value equal to
the Event Notification code as specified in Table 57-4 and
Event TLV Type field equal to the Errored Frame Seconds
Summary Event value as specified in Table 57-10.ro Unsigned16 .1.3.6.1.4.1.629.300.1.3.1.1.49 |
mrvEfmOamErrFrmSecSumEvtThreshldAn integer corresponding to the Errored Frame Seconds
Threshold field in the most recently transmitted Errored
Frame Seconds Summary Event TLV in an Event Notification
OAMPDU (see 57.4.3.2). This integer is updated when a
OAM:MA_DATA.request service primitive is generated within
the OAM sublayer with an OAMPDU Code field value equal to
the Event Notification code as specified in Table 57-4 and
Event TLV Type field equal to the Errored Frame Seconds
Summary Event value as specified in Table 57-10.ro Unsigned16 .1.3.6.1.4.1.629.300.1.3.1.1.50 |
mrvEfmOamErrFrmSecSumEvtCountAn integer corresponding to the Error Running Total field
in the most recently transmitted Errored Frame Seconds
Summary Event TLV in an Event Notification OAMPDU (see
57.4.3.2). This integer is updated when a
OAM:MA_DATA.request service primitive is generated within
the OAM sublayer with an OAMPDU Code field value equal to
the Event Notification code as specified in Table 57-4 and
Event TLV Type field equal to the Errored Frame Seconds
Summary Event value as specified in Table 57-10.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.51 |
mrvEfmOamFramesLostDueToOamErrorA count of frames that would otherwise be transmitted by
the OAM sublayer, but could not be due to an internal OAM
sublayer transmit error. If this counter is incremented,
then none of the other counters in this section are
incremented. The exact meaning and mechanism for
incrementing this counter is implementation dependent.ro Counter32 .1.3.6.1.4.1.629.300.1.3.1.1.52 |
mrvEfmOamAdminStateA value that identifies the operational state of the OAM
sublayer. An interface which can provide the OAM sublayer
functions specified in Clause 57 will be enabled to do so
when this attribute has the enumeration enable(3). When
this attribute has the enumeration disable(2) the interface
will act as it would if it had no OAM sublayer.rw Enumeration .1.3.6.1.4.1.629.300.1.3.1.1.53 |
mrvEfmOamOperStateThis object declares configurable (*) and operational reasons for
disabling OAM service. The reason applies only if the bit is set.
Multiple bits may be set concurrently. OAM service is enabled
when no bits are set.
Bit Reason to disable
0 reserved
1 reserved
2 reserved
3 reserved
4 reserved
5 Temporarily disabled for download processing
6 Administratively disabled (*)
7 OAM service is not available
OCTET STRING bitmasks count the leftmost bit (MSB) as 0.ro OCTET STRING .1.3.6.1.4.1.629.300.1.3.1.1.54 |
mrvEfmProduct OBJECT IDENTIFIER .1.3.6.1.4.1.629.300.2 |
mrvEfmNc316Nm OBJECT IDENTIFIER .1.3.6.1.4.1.629.300.2.1 |
mrvEfmConformance OBJECT IDENTIFIER .1.3.6.1.4.1.629.300.3 |
mrvEfmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.629.300.3.1 |