MPBC-2RU-MIB
AI MIB Summary
The MPBC-2RU-MIB module facilitates SNMP-based monitoring and management of the MPBC 2RU product line, providing access to hardware status, interface statistics, and system performance metrics specific to this chassis-based network appliance.
MPBC 2RU product line.
Main OID:
mpbc2RU.1.3.6.1.4.1.4464.2.2
648
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
648 total| Object Name |
|---|
mpbc OBJECT IDENTIFIER .1.3.6.1.4.1.4464 |
mpbcRegs OBJECT IDENTIFIER .1.3.6.1.4.1.4464.1 |
mpbcProductRegs OBJECT IDENTIFIER .1.3.6.1.4.1.4464.1.1 |
mpbc2RUProductRegPlease replace this text with your description. OBJECT IDENTIFIER .1.3.6.1.4.1.4464.1.1.2 |
mpbcProducts OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2 |
mpbc2RUMPBC 2RU product line. MODULE-IDENTITY .1.3.6.1.4.1.4464.2.2 |
mpbc2RUTrap OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.0 |
mpbc2RUTrapCriticalCritical Trap alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.4464.2.2.0.1 |
mpbc2RUTrapMajorMajor Trap alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.4464.2.2.0.2 |
mpbc2RUTrapMinorMinor Trap alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.4464.2.2.0.3 |
mpbc2RUTrapInformationalInformational Trap alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.4464.2.2.0.4 |
mpbc2RUAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.1 |
mpbc2RUAlarmTablePlease replace this text with your description. SEQUENCE OF Mpbc2RUAlarmEntry .1.3.6.1.4.1.4464.2.2.1.1 |
mpbc2RUAlarmEntryPlease replace this text with your description. Mpbc2RUAlarmEntry .1.3.6.1.4.1.4464.2.2.1.1.1 |
mpbc2RUAlarmIndexNumber from 0 to x that represents the alarm row number of the table INTEGER .1.3.6.1.4.1.4464.2.2.1.1.1.1 |
mpbc2RUAlarmNEIDThis object is a descriptive text that described the devicero OCTET STRING .1.3.6.1.4.1.4464.2.2.1.1.1.2 |
mpbc2RUPositionThis object represents the sub-module. For 2RU products, it always returns 1ro INTEGER .1.3.6.1.4.1.4464.2.2.1.1.1.3 |
mpbc2RUAlarmModuleCard or sub-module (e.g. Laser Controller, NEM) that generated the alarmro OCTET STRING .1.3.6.1.4.1.4464.2.2.1.1.1.4 |
mpbc2RUAlarmIDAlarm Codero INTEGER .1.3.6.1.4.1.4464.2.2.1.1.1.5 |
mpbc2RUAlarmDescriptionTextual description of the alarmro OCTET STRING .1.3.6.1.4.1.4464.2.2.1.1.1.6 |
mpbc2RUAlarmSeverityAlarm severity (Minor, Major or Critical)ro OCTET STRING .1.3.6.1.4.1.4464.2.2.1.1.1.7 |
mpbc2RUAlarmDateAndTimeThe date and time when the alarm was triggered.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.1.1.1.8 |
mpbc2RUAlarmExtraDataHexadecimal data associated with the alarm. The extra data provided is current when the alarm was raised and may not represent the system's present status.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.1.1.1.9 |
mpbc2RUPxx OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.2 |
mpbc2RUPxxControl OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.2.1 |
mpbc2RUPxxLaserModeLaser OFF(0), Laser APR(1).rw Enumeration .1.3.6.1.4.1.4464.2.2.2.1.1 |
mpbc2RUPxxControlModeAPC(4), AGC(5).rw INTEGER .1.3.6.1.4.1.4464.2.2.2.1.2 |
mpbc2RUPxxPwrSetPtmWEDFA output power set point in mW. (For APC mode)rw INTEGER .1.3.6.1.4.1.4464.2.2.2.1.3 |
mpbc2RUPxxGainSetPtdBx10EDFA gain set point in dB x10. (For AGC mode)rw Integer32 .1.3.6.1.4.1.4464.2.2.2.1.4 |
mpbc2RUPxxVOASettingdBx10VOA setting in dB x 10. (If the VOA is not present this object shows zero)rw Integer32 .1.3.6.1.4.1.4464.2.2.2.1.5 |
mpbc2RUPxxResetNormal = False(2), Reset = True(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.2.1.6 |
mpbc2RUPxxMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.2.2 |
mpbc2RUPxxLD1CurmALD1 Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.2.2.1 |
mpbc2RUPxxLD1TempDegCx10LD1 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.2.2.2 |
mpbc2RUPxxLD1TECCurmALD1 TEC Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.2.2.3 |
mpbc2RUPxxLD2CurmALD2 Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.2.2.4 |
mpbc2RUPxxLD2TempDegCx10LD2 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.2.2.5 |
mpbc2RUPxxLD2TECCurmALD2 TEC Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.2.2.6 |
mpbc2RUPxxCaseTempDegCx10Case temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.2.2.7 |
mpbc2RUPxxOutputPwrmWOutput power in mWro Unsigned32 .1.3.6.1.4.1.4464.2.2.2.2.8 |
mpbc2RUPxxGaindBx10Gain in dB x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.2.2.9 |
mpbc2RUPxxInputPwrmWx100Input power in mW x 100.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.2.2.10 |
mpbc2RUPxxBackReflPwrmWx100Back-reflection power in mW x 100.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.2.2.11 |
mpbc2RUPxxMonLaserStateLaser OFF(0), Laser ON(10), ALS(2), ALS100(3), Normal(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.2.2.12 |
mpbc2RUPxxMonLaserModeLaser OFF(0), Laser ON(10), Laser APR(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.2.2.13 |
mpbc2RUPxxMonControlModeMonitor laser control mode ACC(3), APC(4), AGC(5).ro INTEGER .1.3.6.1.4.1.4464.2.2.2.2.14 |
mpbc2RUPxxDisableInputStateOff = 0, On = 1.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.2.2.15 |
mpbc2RUPxxUnitStateInit(0), Normal(1), Fault(2)ro Enumeration .1.3.6.1.4.1.4464.2.2.2.2.16 |
mpbc2RUPxxOSCRxToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3)ro Enumeration .1.3.6.1.4.1.4464.2.2.2.2.17 |
mpbc2RUPxxOSCTempdegCx10OSC temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.2.2.18 |
mpbc2RUPxxOSCTxToneTone Off(0), Tone 1(1), Tone 2(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.2.2.19 |
mpbc2RUPxxOSCTxPwrmWx100OSC Tx power in mW x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.2.2.20 |
mpbc2RUPxxOSCRx1610ToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3). (If Not in OSC Mode with ROPA, this object shows zero)ro Enumeration .1.3.6.1.4.1.4464.2.2.2.2.21 |
mpbc2RUPxxMonVOASettingdBx10VOA setting in dB x 10. (If the VOA is not present, this object shows zero)ro INTEGER .1.3.6.1.4.1.4464.2.2.2.2.22 |
mpbc2RUPxxConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.2.3 |
mpbc2RUPxxLD1CurMinThrmALD1 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.2.3.1 |
mpbc2RUPxxLD2CurMinThrmALD2 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.2.3.2 |
mpbc2RUPxxLD1CurMaxThrmALD1 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.2.3.3 |
mpbc2RUPxxLD2CurMaxThrmALD2 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.2.3.4 |
mpbc2RUPxxCaseTempMinSetThrDegCx10Case temperature minimum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.2.3.5 |
mpbc2RUPxxCaseTempMinClearThrDegCx10Case temperature minimum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.2.3.6 |
mpbc2RUPxxCaseTempMaxSetThrDegCx10Case temperature maximum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.2.3.7 |
mpbc2RUPxxCaseTempMaxClearThrDegCx10Case temperature maximum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.2.3.8 |
mpbc2RUPxxCaseTempMinAlrmThrDegCx10Case temperature minimum alarm threshold in deg. Celsius x 10rw INTEGER .1.3.6.1.4.1.4464.2.2.2.3.9 |
mpbc2RUPxxCaseTempMaxAlrmThrDegCx10Case temperature maximum alarm threshold in deg. Celsius x 10rw INTEGER .1.3.6.1.4.1.4464.2.2.2.3.10 |
mpbc2RUPxxLOSSetThrdBmx100LOS Set threshold in dBm x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.2.3.11 |
mpbc2RUPxxLOSClearThrdBmx100LOS Clear threshold in dBm x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.2.3.12 |
mpbc2RUPxxInputMinThrdBmx100Input power minimum threshold in dBm x 100.rw INTEGER .1.3.6.1.4.1.4464.2.2.2.3.13 |
mpbc2RUPxxInputMaxThrdBmx100Input power maximum threshold in dBm x 100.rw INTEGER .1.3.6.1.4.1.4464.2.2.2.3.14 |
mpbc2RUPxxOutputMinThrdBx10Output power minimum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.2.3.15 |
mpbc2RUPxxOutputMaxThrdBx10Output power maximum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.2.3.16 |
mpbc2RUPxxOSCModeOSC mode, 0: Stand-alone, 1: ROPA.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.2.3.17 |
mpbc2RUPxxOutputSetptminLimdBmx10Output set point minimum limits in dBm x 10ro INTEGER .1.3.6.1.4.1.4464.2.2.2.3.18 |
mpbc2RUPxxOutputSetptmaxLimdBmx10Output set point maximum limits in dBm x 10ro INTEGER .1.3.6.1.4.1.4464.2.2.2.3.19 |
mpbc2RUPxxGainSetptminLimdBx10Gain set point minimum limit in dB x 10ro INTEGER .1.3.6.1.4.1.4464.2.2.2.3.20 |
mpbc2RUPxxGainSetptmaxLimdBx10Gain set point maximum limit in dB x 10ro INTEGER .1.3.6.1.4.1.4464.2.2.2.3.21 |
mpbc2RURFL1 OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.3 |
mpbc2RURFL1Control OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.3.1 |
mpbc2RURFL1LaserModeLaser OFF(0), Laser APR(1)rw Enumeration .1.3.6.1.4.1.4464.2.2.3.1.1 |
mpbc2RURFL1ControlModeAPC(4)rw INTEGER .1.3.6.1.4.1.4464.2.2.3.1.2 |
mpbc2RURFL1PwrSetPtmWLaser output power setpoint in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.3.1.3 |
mpbc2RURFL1ResetNormal = False(2), Reset = True(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.3.1.4 |
mpbc2RURFL1Monitor OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.3.2 |
mpbc2RURFL1LD1CurrentLD1 Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.3.2.1 |
mpbc2RURFL1LD2CurrentLD2 Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.3.2.2 |
mpbc2RURFL1CaseTempDegCx10Case Temperature in deg. C x 10ro INTEGER .1.3.6.1.4.1.4464.2.2.3.2.3 |
mpbc2RURFL1OutputPwrmWOutput power in mWro Unsigned32 .1.3.6.1.4.1.4464.2.2.3.2.4 |
mpbc2RURFL1MonLaserStateLaser OFF(0), Laser ON(10), ALS(2), ALS100(3), Normal(1)ro Enumeration .1.3.6.1.4.1.4464.2.2.3.2.5 |
mpbc2RURFL1MonLaserModeLaser OFF(0), Laser ON(10), Laser APR(1)ro Enumeration .1.3.6.1.4.1.4464.2.2.3.2.6 |
mpbc2RURFL1MonControlModeACC(3), APC(4).ro INTEGER .1.3.6.1.4.1.4464.2.2.3.2.7 |
mpbc2RURFL1DisableInputStateOff = 0, On = 1ro INTEGER .1.3.6.1.4.1.4464.2.2.3.2.8 |
mpbc2RURFL1UnitStateInit(0), Normal(1), Fault(2)ro Enumeration .1.3.6.1.4.1.4464.2.2.3.2.9 |
mpbc2RURFL1OSCRxToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3)ro Enumeration .1.3.6.1.4.1.4464.2.2.3.2.10 |
mpbc2RURFL1OSCTempDegCx10OSC Temperature in deg. C x 10. (If OSC Tx not present, this object shows zero)ro INTEGER .1.3.6.1.4.1.4464.2.2.3.2.11 |
mpbc2RURFL1OSCTxToneTone Off(0), Tone 1(1), Tone 2(2). (If OSC Tx not present, this object shows zero)ro Enumeration .1.3.6.1.4.1.4464.2.2.3.2.12 |
mpbc2RURFL1OSCTxPwrmWx100OSC Tx power in mW x 100. (If OSC Tx not present, this object shows zero)ro INTEGER .1.3.6.1.4.1.4464.2.2.3.2.13 |
mpbc2RURFL1Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.3.3 |
mpbc2RURFL1PwrThrLowdBx10Laser output power low threshold in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.3.3.1 |
mpbc2RURFL1PwrThrHidBx10Laser output power high threshold in dB x 10.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.3.3.2 |
mpbc2RURFL1CaseTempMinAlrmThDegCx10Case temperature minimum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.3.3.3 |
mpbc2RURFL1CaseTempMaxAlrmThDegCx10Case temperature maximum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.3.3.4 |
mpbc2RURFL1LD1CurMinThrmALD1 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.3.3.5 |
mpbc2RURFL1LD1CurMaxThrmALD1 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.3.3.6 |
mpbc2RURFL1LD2CurMinThrmALD2 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.3.3.7 |
mpbc2RURFL1LD2CurMaxThrmALD2 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.3.3.8 |
mpbc2RURFL1CaseTempMinSetThrDegCx10Case temperature minimum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.3.3.9 |
mpbc2RURFL1CaseTempMinClearThrDegCx10Case temperature minimum clear threshold in deg. Celsius x 10ro INTEGER .1.3.6.1.4.1.4464.2.2.3.3.10 |
mpbc2RURFL1CaseTempMaxSetThrDegCx10Case temperature maximum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.3.3.11 |
mpbc2RURFL1CaseTempMaxClearThrDegCx10Case temperature maximum clear threshold in deg. Celsius x 10ro INTEGER .1.3.6.1.4.1.4464.2.2.3.3.12 |
mpbc2RURFL2 OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.4 |
mpbc2RURFL2Control OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.4.1 |
mpbc2RURFL2LaserModeLaser OFF(0), Laser APR(1)rw Enumeration .1.3.6.1.4.1.4464.2.2.4.1.1 |
mpbc2RURFL2ControlModeAPC(4)rw INTEGER .1.3.6.1.4.1.4464.2.2.4.1.2 |
mpbc2RURFL2WL145xPwrSetPtmWWL 145x nm power set point in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.4.1.3 |
mpbc2RURFL2WL142xPwrSetPtmWWL 142x nm power set point in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.4.1.4 |
mpbc2RURFL2ResetNormal = False(2), Reset = True(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.4.1.5 |
mpbc2RURFL2Monitor OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.4.2 |
mpbc2RURFL2LD1CurmALD1 Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.2.1 |
mpbc2RURFL2LD1TempDegCx10LD1 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.4.2.2 |
mpbc2RURFL2LD1TECCurmALD1 TEC Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.2.3 |
mpbc2RURFL2LD2CurmALD2 Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.2.4 |
mpbc2RURFL2CaseTempDegCx10Case temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.4.2.5 |
mpbc2RURFL2SeedPwrmWx100Seed power in mW x 100.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.2.6 |
mpbc2RURFL2WL142xOutPwrmWx10WL 142x nm Output power in mW x 10ro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.2.7 |
mpbc2RURFL2WL145xOutPwrmWx10WL 145x nm Output power in mW x 10ro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.2.8 |
mpbc2RURFL2TotalOutPwrmWx10Total Output power in mW x 10ro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.2.9 |
mpbc2RURFL2MonLaserStateLaser OFF(0), Laser ON(10), ALS(2), ALS100(3), Normal(1)ro Enumeration .1.3.6.1.4.1.4464.2.2.4.2.10 |
mpbc2RURFL2MonLaserModeLaser OFF(0), Laser ON(10), Laser APR(1)ro Enumeration .1.3.6.1.4.1.4464.2.2.4.2.11 |
mpbc2RURFL2MonControlModeACC(3), APC(4).ro INTEGER .1.3.6.1.4.1.4464.2.2.4.2.12 |
mpbc2RURFL2DisableInputStateOff = 0, On = 1ro INTEGER .1.3.6.1.4.1.4464.2.2.4.2.13 |
mpbc2RURFL2UnitStateInit(0), Normal(1), Fault(2)ro Enumeration .1.3.6.1.4.1.4464.2.2.4.2.14 |
mpbc2RURFL2OSCRxToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3)ro Enumeration .1.3.6.1.4.1.4464.2.2.4.2.15 |
mpbc2RURFL2OSCTempDegCx10OSC Temperature in deg. C x 10. (If OSC Tx not present, this object shows zero)ro INTEGER .1.3.6.1.4.1.4464.2.2.4.2.16 |
mpbc2RURFL2OSCTxToneTone Off(0), Tone 1(1), Tone 2(2). (If OSC Tx not present, this object shows zero)ro Enumeration .1.3.6.1.4.1.4464.2.2.4.2.17 |
mpbc2RURFL2OSCTxPwrmWx100OSC Tx power in mW x 100. (If OSC Tx not present, this object shows zero)ro INTEGER .1.3.6.1.4.1.4464.2.2.4.2.18 |
mpbc2RURFL2Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.4.3 |
mpbc2RURFL2LD1CurMinThrmALD1 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.3.1 |
mpbc2RURFL2LD1CurMaxThrmALD1 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.3.2 |
mpbc2RURFL2LD2CurMinThrmALD2 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.3.3 |
mpbc2RURFL2LD2CurMaxThrmALD2 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.3.4 |
mpbc2RURFL2CaseTempMinSetThrDegCx10Case temperature minimum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.4.3.5 |
mpbc2RURFL2CaseTempMinClearThrDegCx10Case temperature minimum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.4.3.6 |
mpbc2RURFL2CaseTempMaxSetThrDegCx10Case temperature maximum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.4.3.7 |
mpbc2RURFL2CaseTempMaxClearThrDegCx10Case temperature maximum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.4.3.8 |
mpbc2RURFL2WL1OutputMinThrdBx10WL1 output minimum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.4.3.9 |
mpbc2RURFL2WL1OutputMaxThrdBx10WL1 output maximum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.4.3.10 |
mpbc2RURFL2WL1FaultSetpointmAWL1 check current in mA. Typ: 1000 mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.3.11 |
mpbc2RURFL2WL1FaultThrWL1 check power minimum ratio. Typ:0.67ro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.3.12 |
mpbc2RURFL2WL1FaultDelaymsWL1 APC period in millisec. Typ: 10000 msro Unsigned32 .1.3.6.1.4.1.4464.2.2.4.3.13 |
mpbc2RURFL2WL2OutputMinThrdBx10WL2 output minimum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.4.3.14 |
mpbc2RURFL2WL2OutputMaxThrdBx10WL2 output maximum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.4.3.15 |
mpbc2RURFL2CaseTempMinAlrmThrDegCx10Case temperature minimum alarm threshold in deg. Celsius x 10rw INTEGER .1.3.6.1.4.1.4464.2.2.4.3.16 |
mpbc2RURFL2CaseTempMaxAlrmThrDegCx10Case temperature maximum alarm threshold in deg. Celsius x 10rw INTEGER .1.3.6.1.4.1.4464.2.2.4.3.17 |
mpbc2RURFL2WL2OutputPwrMinLimdBmx10WL2 output power minimum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.4.3.18 |
mpbc2RURFL2WL2OutputPwrMaxLimdBmx10WL2 output power maximum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.4.3.19 |
mpbc2RURFL2WL1OutputPwrMinLimdBmx10WL1 output power minimum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.4.3.20 |
mpbc2RURFL2WL1OutputPwrMaxLimdBmx10WL1 output power maximum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.4.3.21 |
mpbc2RUSRCP OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.5 |
mpbc2RUSRCPControl OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.5.1 |
mpbc2RUSRCPLaserModeLaser OFF(0), Laser APR(1)rw Enumeration .1.3.6.1.4.1.4464.2.2.5.1.1 |
mpbc2RUSRCPControlModeAPC(4)rw INTEGER .1.3.6.1.4.1.4464.2.2.5.1.2 |
mpbc2RUSRCPSeedOutputPwrmWSeed Output Power set point in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.5.1.3 |
mpbc2RUSRCPMainOutputPwrmWMain Output Power set point in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.5.1.4 |
mpbc2RUSRCPResetNormal = False(2), Reset = True(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.5.1.5 |
mpbc2RUSRCPMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.5.2 |
mpbc2RUSRCPLD1CurmALD1 Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.2.1 |
mpbc2RUSRCPLD1TempDegCx10LD1 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.5.2.2 |
mpbc2RUSRCPLD1TECCurmALD1 TEC Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.2.3 |
mpbc2RUSRCPLD2CurmALD2 Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.2.4 |
mpbc2RUSRCPCaseTempDegCx10Case temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.5.2.5 |
mpbc2RUSRCPMonSeedOutputPwrmWx10Seed output power in mW x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.2.6 |
mpbc2RUSRCPMainOutputPwrmWx10Main output power in mW x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.2.7 |
mpbc2RUSRCPInputPwrmWx100Input power in mW x 100.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.2.8 |
mpbc2RUSRCPMonLaserStateLaser OFF(0), Laser ON(10), ALS(2), ALS100(3), Normal(1)ro Enumeration .1.3.6.1.4.1.4464.2.2.5.2.9 |
mpbc2RUSRCPMonLaserModeLaser OFF(0), Laser ON(10), Laser APR(1)ro Enumeration .1.3.6.1.4.1.4464.2.2.5.2.10 |
mpbc2RUSRCPMonControlModeACC(3), APC(4)ro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.2.11 |
mpbc2RUSRCPDisableInputStateOff = 0, On = 1.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.2.12 |
mpbc2RUSRCPUnitStateInit(0), Normal(1), Fault(2)ro Enumeration .1.3.6.1.4.1.4464.2.2.5.2.13 |
mpbc2RUSRCPOSCRxToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3)ro Enumeration .1.3.6.1.4.1.4464.2.2.5.2.14 |
mpbc2RUSRCPOSCTempdegCx10OSC temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.5.2.15 |
mpbc2RUSRCPOSCTxToneTone Off(0), Tone 1(1), Tone 2(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.5.2.16 |
mpbc2RUSRCPOSCTxPwrmWx100OSC Tx power in mW x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.5.2.17 |
mpbc2RUSRCPOSCRx1610ToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3). (If Not in OSC Mode with ROPA, this object shows zero)ro Enumeration .1.3.6.1.4.1.4464.2.2.5.2.18 |
mpbc2RUSRCPConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.5.3 |
mpbc2RUSRCPLD1CurMinThrmALD1 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.3.1 |
mpbc2RUSRCPLD1CurMaxThrmALD1 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.3.2 |
mpbc2RUSRCPLD2CurMinThrmALD2 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.3.3 |
mpbc2RUSRCPLD2CurMaxThrmALD2 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.3.4 |
mpbc2RUSRCPCaseTempMinSetThrDegCx10Case temperature minimum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.5.3.5 |
mpbc2RUSRCPCaseTempMinClearThrDegCx10Case temperature minimum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.5.3.6 |
mpbc2RUSRCPCaseTempMaxSetThrDegCx10Case temperature maximum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.5.3.7 |
mpbc2RUSRCPCaseTempMaxClearThrDegCx10Case temperature maximum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.5.3.8 |
mpbc2RUSRCPSeedOutputMinThrdBx10Seed output minimum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.5.3.9 |
mpbc2RUSRCPSeedOutputMaxThrdBx10Seed output maximum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.5.3.10 |
mpbc2RUSRCPMainOutputPwrMinThrdBx10Main output power minimum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.5.3.11 |
mpbc2RUSRCPMainOutputPwrMaxThrdBx10Main output power maximum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.5.3.12 |
mpbc2RUSRCPSeedOutputMinFautThrmWSeed output minimum fault threshold in mW.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.3.13 |
mpbc2RUSRCPCaseTempMinAlrmThrDegCx10Case temperature minimum alarm threshold in deg. Celsius x 10rw INTEGER .1.3.6.1.4.1.4464.2.2.5.3.14 |
mpbc2RUSRCPCaseTempMaxAlrmThrDegCx10Case temperature maximum alarm threshold in deg. Celsius x 10rw INTEGER .1.3.6.1.4.1.4464.2.2.5.3.15 |
mpbc2RUSRCPMainOutputPwrMinLimdBmx10Main output power minimum limit in dBm x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.3.16 |
mpbc2RUSRCPMainOutputPwrMaxLimdBmx10Main output power maximum limit in dBm x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.3.17 |
mpbc2RUSRCPSeedOutputPwrMinLimdBmx10Seed output power minimum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.5.3.18 |
mpbc2RUSRCPSeedOutputPwrMaxLimdBmx10Seed output power maximum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.5.3.19 |
mpbc2RUSRCPAPLSetThrdBmx10APL set threshold in dBm x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.5.3.20 |
mpbc2RUSRCPAPLClearThrdBmx10APL clear threshold in dBm x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.5.3.21 |
mpbc2RUSRCPAPLMainOutputPwrdBmx10APL power set point in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.5.3.22 |
mpbc2RUSRCPOSCModeOSC mode, 0: Stand-alone, 1: ROPA.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.5.3.23 |
mpbc2RUSRCPSeedFaultDelaymsDelay to induce seed fault in ms.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.5.3.24 |
mpbc2RUMLD OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.6 |
mpbc2RUMLDControl OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.6.1 |
mpbc2RUMLDLaserModeLaser OFF(0), Laser APR(1).rw Enumeration .1.3.6.1.4.1.4464.2.2.6.1.1 |
mpbc2RUMLDControlModeAPC(4)rw Unsigned32 .1.3.6.1.4.1.4464.2.2.6.1.2 |
mpbc2RUMLD1stWLPwrSetPtmWWL1 output power set point in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.6.1.3 |
mpbc2RUMLD2ndWLPwrSetPtmWWL2 output power set point in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.6.1.4 |
mpbc2RUMLDResetNormal = False(2), Reset = True(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.6.1.5 |
mpbc2RUMLDMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.6.2 |
mpbc2RUMLDLD1CurmALD1 Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.6.2.1 |
mpbc2RUMLDLD1TempDegCx10LD1 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.6.2.2 |
mpbc2RUMLDLD1TECCurmALD1 TEC Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.6.2.3 |
mpbc2RUMLDLD2CurmALD2 Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.6.2.4 |
mpbc2RUMLDLD2TempDegCx10LD2 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.6.2.5 |
mpbc2RUMLDLD2TECCurmALD2 TEC Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.6.2.6 |
mpbc2RUMLDCaseTempDegCx10Case temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.6.2.7 |
mpbc2RUMLDMon1stWLOutputPwrmWx10WL1 output power in mW x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.6.2.8 |
mpbc2RUMLDMon2ndWLOutputPwrmWx10WL2 output power in mW x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.6.2.9 |
mpbc2RUMLDInputPwrmWx100Input power in mW x 100.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.6.2.10 |
mpbc2RUMLDMonLaserStateLaser OFF(0), Laser ON(10), ALS(2), ALS100(3), Normal(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.6.2.11 |
mpbc2RUMLDMonLaserModeLaser OFF(0), Laser ON(10), Laser APR(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.6.2.12 |
mpbc2RUMLDMonControlModeACC(3), APC(4).ro Unsigned32 .1.3.6.1.4.1.4464.2.2.6.2.13 |
mpbc2RUMLDDisableInputStateOff = 0, On = 1.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.6.2.14 |
mpbc2RUMLDUnitStateInit(0), Normal(1), Fault(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.6.2.15 |
mpbc2RUMLDOSCRx1574ToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3)ro Enumeration .1.3.6.1.4.1.4464.2.2.6.2.16 |
mpbc2RUMLDOSCTempdegCx10OSC temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.6.2.17 |
mpbc2RUMLDOSCTxToneTone Off(0), Tone 1(1), Tone 2(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.6.2.18 |
mpbc2RUMLDOSCTxPwrmWx100OSC Tx power in mW x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.6.2.19 |
mpbc2RUMLDOSCRx1610ToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3). (If Not in OSC Mode with ROPA, this object shows zero)ro Enumeration .1.3.6.1.4.1.4464.2.2.6.2.20 |
mpbc2RUMLDConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.6.3 |
mpbc2RUMLDLD1CurMinThrmALD1 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.6.3.1 |
mpbc2RUMLDLD1CurMaxThrmALD1 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.6.3.2 |
mpbc2RUMLDLD2CurMinThrmALD2 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.6.3.3 |
mpbc2RUMLDLD2CurMaxThrmALD2 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.6.3.4 |
mpbc2RUMLDCaseTempMinSetThrDegCx10Case temperature minimum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.6.3.5 |
mpbc2RUMLDCaseTempMinClearThrDegCx10Case temperature minimum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.6.3.6 |
mpbc2RUMLDCaseTempMaxSetThrDegCx10Case temperature maximum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.6.3.7 |
mpbc2RUMLDCaseTempMaxClearThrDegCx10Case temperature maximum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.6.3.8 |
mpbc2RUMLDCaseTempMinAlrmThrDegCx10Case temperature minimum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.6.3.9 |
mpbc2RUMLDCaseTempMaxAlrmThrDegCx10Case temperature maximum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.6.3.10 |
mpbc2RUMLD1stWLOutputPwrMinThrdBx10WL1 output minimum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.6.3.11 |
mpbc2RUMLD1stWLOutputPwrMaxThrdBx10WL1 output maximum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.6.3.12 |
mpbc2RUMLD2ndWLOutputPwrMinThrdBx10WL2 output minimum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.6.3.13 |
mpbc2RUMLD2ndWLOutputPwrMaxThrdBx10WL2 output maximum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.6.3.14 |
mpbc2RUMLD1stWLOutputPwrMinLimdBmx10WL1 output power minimum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.6.3.15 |
mpbc2RUMLD1stWLOutputPwrMaxLimdBmx10WL1 output power maximum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.6.3.16 |
mpbc2RUMLD2ndWLOutputPwrMinLimdBmx10WL2 output power minimum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.6.3.17 |
mpbc2RUMLD2ndWLOutputPwrMaxLimdBmx10WL2 output power maximum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.6.3.18 |
mpbc2RUMLDOSCModeOSC mode, 0: Stand-alone, 1: ROPA.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.6.3.19 |
mpbc2RUPY OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.7 |
mpbc2RUPYControl OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.7.1 |
mpbc2RUPYLaserModeLaser OFF(0), Laser APR(1).rw Enumeration .1.3.6.1.4.1.4464.2.2.7.1.1 |
mpbc2RUPYControlModeAPC(4), AGC(5).rw Unsigned32 .1.3.6.1.4.1.4464.2.2.7.1.2 |
mpbc2RUPYPreAmpSetPtmWPre-amplifier power setpoint in mW.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.1.3 |
mpbc2RUPYPwrSetPtmWOutput power setpoint in mW. (For APC mode)rw Unsigned32 .1.3.6.1.4.1.4464.2.2.7.1.4 |
mpbc2RUPYGainSetPtdBx10Gain setpoint in dB x10. (For AGC mode)rw Integer32 .1.3.6.1.4.1.4464.2.2.7.1.5 |
mpbc2RUPYVoaSetPtdBx10VOA setpoint in dB x10. (If the VOA is not present this object shows zero)rw Integer32 .1.3.6.1.4.1.4464.2.2.7.1.6 |
mpbc2RUPYResetNormal = False(2), Reset = True(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.7.1.7 |
mpbc2RUPYMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.7.2 |
mpbc2RUPYLD1CurmALD1 Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.2.1 |
mpbc2RUPYLD1TempDegCx10LD1 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.7.2.2 |
mpbc2RUPYLD1TECCurmALD1 TEC Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.2.3 |
mpbc2RUPYLD2CurmALD2 Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.2.4 |
mpbc2RUPYCaseTempDegCx10Case temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.7.2.5 |
mpbc2RUPYMonPreAmpPumpPwrmWx10Pre-amplifier pump output power in mW x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.2.6 |
mpbc2RUPYMainOutputPwrmWx10Main output power in mW x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.2.7 |
mpbc2RUPYGaindBx10Gain in dB x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.7.2.8 |
mpbc2RUPYInputPwrmWx100Input power in mW x 100.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.2.9 |
mpbc2RUPYBackReflPwrmWx100Back reflection power in mW x 100.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.2.10 |
mpbc2RUPYMonLaserStateLaser OFF(0), Laser ON(10), ALS(2), ALS100(3), Normal(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.7.2.11 |
mpbc2RUPYMonLaserModeLaser OFF(0), Laser ON(10), Laser APR(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.7.2.12 |
mpbc2RUPYMonControlModeACC(3), APC(4), AGC(5).ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.2.13 |
mpbc2RUPYDisableInputStateOff = 0, On = 1.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.2.14 |
mpbc2RUPYUnitStateInit(0), Normal(1), Fault(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.7.2.15 |
mpbc2RUPYOSCRxToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3).ro Enumeration .1.3.6.1.4.1.4464.2.2.7.2.16 |
mpbc2RUPYOSCTempDegCx10OSC temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.7.2.17 |
mpbc2RUPYOSCTxToneTone Off(0), Tone 1(1), Tone 2(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.7.2.18 |
mpbc2RUPYOSCTxPwrmWx100OSC Tx power in mW x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.7.2.19 |
mpbc2RUPYOSCRx1610ToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3). (If Not in OSC Mode with ROPA, this object shows zero)ro Enumeration .1.3.6.1.4.1.4464.2.2.7.2.20 |
mpbc2RUPYVOASettingdBx10VOA Setting in dB x 10. (If the VOA is not present, this object shows zero)ro INTEGER .1.3.6.1.4.1.4464.2.2.7.2.21 |
mpbc2RUPYConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.7.3 |
mpbc2RUPYLD1CurMinThrmAPreamp current minimum alarm threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.3.1 |
mpbc2RUPYLD1CurMaxThrmAPreamp current maximum alarm threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.3.2 |
mpbc2RUPYLD2CurMinThrmAMain pump current minimum alarm threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.3.3 |
mpbc2RUPYLD2CurMaxThrmAMain pump current maximum alarm threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.3.4 |
mpbc2RUPYCaseTempMinSetThrDegCx10Case temperature minimum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.7.3.5 |
mpbc2RUPYCaseTempMinClearThrDegCx10Case temperature minimum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.7.3.6 |
mpbc2RUPYCaseTempMaxSetThrDegCx10Case temperature maximum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.7.3.7 |
mpbc2RUPYCaseTempMaxClearThrDegCx10Case temperature maximum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.7.3.8 |
mpbc2RUPYCaseTempMinAlrmThrDegCx10Case temperature minimum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.7.3.9 |
mpbc2RUPYCaseTempMaxAlrmThrDegCx10Case temperature maximum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.7.3.10 |
mpbc2RUPYLOSSetThrdBmx100LOS Set threshold in dBm x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.7.3.11 |
mpbc2RUPYLOSClearThrdBmx100LOS Clear threshold in dBm x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.7.3.12 |
mpbc2RUPYInputMinThrdBmx100Input power minimum threshold in dBm x 100.rw INTEGER .1.3.6.1.4.1.4464.2.2.7.3.13 |
mpbc2RUPYInputMaxThrdBmx100Input power maximum threshold in dBm x 100.rw INTEGER .1.3.6.1.4.1.4464.2.2.7.3.14 |
mpbc2RUPYMainOutputMinThrdBx10Main output minimum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.7.3.15 |
mpbc2RUPYMainOutputMaxThrdBx10Main output maximum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.7.3.16 |
mpbc2RUPYPreampPwrMinThrdBx10Preamplifier output power minimum threshold in dB x 10, relative to set point.ro INTEGER .1.3.6.1.4.1.4464.2.2.7.3.17 |
mpbc2RUPYPreampPwrMaxThrdBx10Preamplifier output power maximum threshold in dB x 10, relative to set point.ro INTEGER .1.3.6.1.4.1.4464.2.2.7.3.18 |
mpbc2RUPYOSCModeOSC mode, 0: Stand-alone, 1: ROPA.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.7.3.19 |
mpbc2RUPYOutputPwrSetpointMindBmx10Output Power minimum set point limit Min in dBm x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.3.20 |
mpbc2RUPYOutputPwrSetpointMaxdBmx10Output Power maximum set point limit in dBm x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.3.21 |
mpbc2RUPYGainSetPointMindBx10Amplifier minimum gain set point in dB x 10.ro Integer32 .1.3.6.1.4.1.4464.2.2.7.3.22 |
mpbc2RUPYGainSetPointMaxdBx10Amplifier maximum gain set point in dB x 10.ro Integer32 .1.3.6.1.4.1.4464.2.2.7.3.23 |
mpbc2RUPYPreAmpFaultThrmWPre-amplifier Power Min Threshold in mW.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.3.24 |
mpbc2RUPYPreAmpFaultDelaymsPre-amplifier Fault Delay in ms.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.7.3.25 |
mpbc2RUSRP OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.8 |
mpbc2RUSRPControl OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.8.1 |
mpbc2RUSRPLaserModeLaser OFF(0), Laser APR(1).rw Enumeration .1.3.6.1.4.1.4464.2.2.8.1.1 |
mpbc2RUSRPControlModeAPC(4).rw Unsigned32 .1.3.6.1.4.1.4464.2.2.8.1.2 |
mpbc2RUSRPSeedOutputPwrSetPtmWSeed output power set point in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.8.1.3 |
mpbc2RUSRPMainOutputPwrSetPtmWMain output power set point in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.8.1.4 |
mpbc2RUSRPResetNormal = False(2), Reset = True(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.8.1.5 |
mpbc2RUSRPMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.8.2 |
mpbc2RUSRPLD1CurmALD1 Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.2.1 |
mpbc2RUSRPLD1TempDegCx10LD1 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.8.2.2 |
mpbc2RUSRPLD1TECCurmALD1 TEC Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.2.3 |
mpbc2RUSRPLD2CurmALD2 Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.2.4 |
mpbc2RUSRPCaseTempDegCx10Case temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.8.2.5 |
mpbc2RUSRPMonSeedOutputPwrmWx10Seed output power in mW x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.2.6 |
mpbc2RUSRPMainOutputPwrmWx10Main output power in mW x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.2.7 |
mpbc2RUSRPMonLaserStateLaser OFF(0), Laser ON(10), ALS(2), ALS100(3), Normal(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.8.2.8 |
mpbc2RUSRPMonLaserModeLaser OFF(0), Laser ON(10), Laser APR(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.8.2.9 |
mpbc2RUSRPMonControlModeACC(3), APC(4).ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.2.10 |
mpbc2RUSRPDisableInputStateOff = 0, On = 1.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.2.11 |
mpbc2RUSRPUnitStateInit(0), Normal(1), Fault(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.8.2.12 |
mpbc2RUSRPOSCRxToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3).ro Enumeration .1.3.6.1.4.1.4464.2.2.8.2.13 |
mpbc2RUSRPOSCTempdegCx10OSC temperature in deg. Celsius x 10. (If OSC Tx not present, this object shows zero)ro INTEGER .1.3.6.1.4.1.4464.2.2.8.2.14 |
mpbc2RUSRPOSCTxToneTone Off(0), Tone 1(1), Tone 2(2). (If OSC Tx not present, this object shows zero)ro Enumeration .1.3.6.1.4.1.4464.2.2.8.2.15 |
mpbc2RUSRPOSCTxPwrmWx100OSC Tx power in mW x 100. (If OSC Tx not present, this object shows zero)ro INTEGER .1.3.6.1.4.1.4464.2.2.8.2.16 |
mpbc2RUSRPConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.8.3 |
mpbc2RUSRPLD1CurMinThrmASeed current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.3.1 |
mpbc2RUSRPLD1CurMaxThrmASeed current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.3.2 |
mpbc2RUSRPLD2CurMinThrmAMain pump current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.3.3 |
mpbc2RUSRPLD2CurMaxThrmAMain pump current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.3.4 |
mpbc2RUSRPCaseTempMinSetThrDegCx10Case temperature minimum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.8.3.5 |
mpbc2RUSRPCaseTempMinClearThrDegCx10Case temperature minimum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.8.3.6 |
mpbc2RUSRPCaseTempMaxSetThrDegCx10Case temperature maximum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.8.3.7 |
mpbc2RUSRPCaseTempMaxClearThrDegCx10Case temperature maximum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.8.3.8 |
mpbc2RUSRPMainOutputMinThrdBx10Main output minimum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.8.3.9 |
mpbc2RUSRPMainOutputMaxThrdBx10Main output maximum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.8.3.10 |
mpbc2RUSRPCaseTempMinAlrmThrDegCx10Case temperature minimum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.8.3.11 |
mpbc2RUSRPCaseTempMaxAlrmThrDegCx10Case temperature maximum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.8.3.12 |
mpbc2RUSRPSeedOutputPwrMinThrdBx10Seed output power minimum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.8.3.13 |
mpbc2RUSRPSeedOutputPwrMaxThrdBx10Seed output power maximum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.8.3.14 |
mpbc2RUSRPSeedOutputMinFaultThrmWSeed output minimum fault threshold in mW.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.3.15 |
mpbc2RUSRPMainOutputPwrMinLimdBmx10Main output power minimum limit in dBm x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.3.16 |
mpbc2RUSRPMainOutputPwrMaxLimdBmx10Main output power maximum limit in dBm x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.8.3.17 |
mpbc2RUSRPSeedOutputPwrMinLimdBmx10Seed output power minimum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.8.3.18 |
mpbc2RUSRPSeedOutputPwrMaxLimdBmx10Seed output power maximum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.8.3.19 |
mpbc2RUSRPSeedFaultDelaymsSeed Fault Delay in ms.ro INTEGER .1.3.6.1.4.1.4464.2.2.8.3.20 |
mpbc2RUCRP OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.9 |
mpbc2RUCRPControl OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.9.1 |
mpbc2RUCRPLaserModeLaser OFF(0), Laser APR(1).rw Enumeration .1.3.6.1.4.1.4464.2.2.9.1.1 |
mpbc2RUCRPControlModeAPC(4)rw Unsigned32 .1.3.6.1.4.1.4464.2.2.9.1.2 |
mpbc2RUCRPSeedOutputPwrSetPtmWSeed output power set point in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.9.1.3 |
mpbc2RUCRPMainOutputPwrSetPtmWMain output power set point in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.9.1.4 |
mpbc2RUCRPResetNormal = False(2), Reset = True(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.9.1.5 |
mpbc2RUCRPMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.9.2 |
mpbc2RUCRPLD1CurmALD1 Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.2.1 |
mpbc2RUCRPLD1TempDegCx10LD1 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.9.2.2 |
mpbc2RUCRPLD1TECCurmALD1 TEC Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.2.3 |
mpbc2RUCRPLD2CurmALD2 Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.2.4 |
mpbc2RUCRPCaseTempDegCx10Case temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.9.2.5 |
mpbc2RUCRPMonSeedOutputPwrmWx10Seed output power in mW x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.2.6 |
mpbc2RUCRPMainOutputPwrmWx10Main output power in mW x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.2.7 |
mpbc2RUCRPMonLaserStateLaser OFF(0), Laser ON(10), ALS(2), ALS100(3), Normal(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.9.2.8 |
mpbc2RUCRPMonLaserModeLaser OFF(0), Laser ON(10), Laser APR(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.9.2.9 |
mpbc2RUCRPMonControlModeACC(3), APC(4).ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.2.10 |
mpbc2RUCRPDisableInputStateOff = 0, On = 1.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.2.11 |
mpbc2RUCRPUnitStateInit(0), Normal(1), Fault(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.9.2.12 |
mpbc2RUCRPOSCRx1574ToneOSC Rx 1574 nm, No Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3) (If in OSC Mode Stand-Alone, this object shows zero).ro Enumeration .1.3.6.1.4.1.4464.2.2.9.2.13 |
mpbc2RUCRPOSCTempdegCx10OSC temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.9.2.14 |
mpbc2RUCRPOSCTx1610ToneOSC Tx 1610-nm state: Tone Off(0), Tone 1(1), Tone 2(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.9.2.15 |
mpbc2RUCRPOSCTxPwrmWx100OSC Tx power in mW x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.9.2.16 |
mpbc2RUCRPOSCRx1610ToneOSC Rx 1610-nm state: No Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3).ro Enumeration .1.3.6.1.4.1.4464.2.2.9.2.17 |
mpbc2RUCRPConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.9.3 |
mpbc2RUCRPLD1CurMinThrmALD1 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.3.1 |
mpbc2RUCRPLD1CurMaxThrmALD1 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.3.2 |
mpbc2RUCRPLD2CurMinThrmALD2 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.3.3 |
mpbc2RUCRPLD2CurMaxThrmALD2 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.3.4 |
mpbc2RUCRPCaseTempMinSetThrDegCx10Case temperature minimum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.9.3.5 |
mpbc2RUCRPCaseTempMinClearThrDegCx10Case temperature minimum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.9.3.6 |
mpbc2RUCRPCaseTempMaxSetThrDegCx10Case temperature maximum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.9.3.7 |
mpbc2RUCRPCaseTempMaxClearThrDegCx10Case temperature maximum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.9.3.8 |
mpbc2RUCRPMainOutputMinThrdBx10Main output minimum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.9.3.9 |
mpbc2RUCRPMainOutputMaxThrdBx10Main output maximum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.9.3.10 |
mpbc2RUCRPCaseTempMinAlrmThrDegCx10Case temperature minimum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.9.3.11 |
mpbc2RUCRPCaseTempMaxAlrmThrDegCx10Case temperature maximum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.9.3.12 |
mpbc2RUCRPSeedOutputPwrMinThrdBx10Seed output power minimum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.9.3.13 |
mpbc2RUCRPSeedOutputPwrMaxThrdBx10Seed output power maximum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.9.3.14 |
mpbc2RUCRPSeedOutputMinFaultThrmWSeed output minimum fault threshold in mW.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.3.15 |
mpbc2RUCRPMainOutputPwrMinLimdBmx10Main output power minimum limit in dBm x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.3.16 |
mpbc2RUCRPMainOutputPwrMaxLimdBmx10Main output power maximum limit in dBm x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.3.17 |
mpbc2RUCRPSeedOutputPwrMinLimdBmx10Seed output power minimum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.9.3.18 |
mpbc2RUCRPSeedOutputPwrMaxLimdBmx10Seed output power maximum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.9.3.19 |
mpbc2RUCRPSeedFaultDelaymsDelay to induce seed fault in ms.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.9.3.20 |
mpbc2RUCRPOSCModeOSC mode, 0: Dual-OSC, 3: Stand-Alone.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.9.3.21 |
mpbc2RURFL148x OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.10 |
mpbc2RURFL148xControl OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.10.1 |
mpbc2RURFL148xLaserModeLaser OFF(0), Laser APR(1).rw Enumeration .1.3.6.1.4.1.4464.2.2.10.1.1 |
mpbc2RURFL148xControlModeAPC(4).rw INTEGER .1.3.6.1.4.1.4464.2.2.10.1.2 |
mpbc2RURFL148xPwrSetPtmWLaser output power set point in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.10.1.3 |
mpbc2RURFL148xResetNormal = False(2), Reset = True(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.10.1.4 |
mpbc2RURFL148xMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.10.2 |
mpbc2RURFL148xLD1CurrentLD1 Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.10.2.1 |
mpbc2RURFL148xLD2CurrentLD2 Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.10.2.2 |
mpbc2RURFL148xCaseTempDegCx10Case Temperature in deg. C x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.10.2.3 |
mpbc2RURFL148xOutputPwrmWOutput power in mW.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.10.2.4 |
mpbc2RURFL148xMonLaserStateLaser OFF(0), Laser ON(10), ALS(2), ALS100(3), Normal(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.10.2.5 |
mpbc2RURFL148xMonLaserModeLaser OFF(0), Laser ON(10), Laser APR(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.10.2.6 |
mpbc2RURFL148xMonControlModeACC(3), APC(4).ro Unsigned32 .1.3.6.1.4.1.4464.2.2.10.2.7 |
mpbc2RURFL148xDisableInputStateOff = 0, On = 1.ro INTEGER .1.3.6.1.4.1.4464.2.2.10.2.8 |
mpbc2RURFL148xUnitStateInit(0), Normal(1), Fault(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.10.2.9 |
mpbc2RURFL148xOSCRx1574ToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3) (If in OSC Mode Stand-Alone, this object shows zero).ro Enumeration .1.3.6.1.4.1.4464.2.2.10.2.10 |
mpbc2RURFL148xOSCTempDegCx10OSC Temperature in deg. C x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.10.2.11 |
mpbc2RURFL148xOSCTxToneTone Off(0), Tone 1(1), Tone 2(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.10.2.12 |
mpbc2RURFL148xOSCTxPwrmWx100OSC Tx power in mW x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.10.2.13 |
mpbc2RURFL148xOSCRx1610ToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3).ro Enumeration .1.3.6.1.4.1.4464.2.2.10.2.14 |
mpbc2RURFL148xConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.10.3 |
mpbc2RURFL148xAlarmPwrThrLowdBx10Laser output low power threshold to declare an alarm in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.10.3.1 |
mpbc2RURFL148xAlarmPwrThrHidBx10Laser output high power threshold to declare an alarm in dB x 10.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.10.3.2 |
mpbc2RURFL148xAlarmCaseTempMinThDegCx10Case temperature minimum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.10.3.3 |
mpbc2RURFL148xAlarmCaseTempMaxThDegCx10Case temperature maximum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.10.3.4 |
mpbc2RURFL148xLD1CurMinThrmALD1 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.10.3.5 |
mpbc2RURFL148xLD1CurMaxThrmALD1 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.10.3.6 |
mpbc2RURFL148xLD2CurMinThrmALD2 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.10.3.7 |
mpbc2RURFL148xLD2CurMaxThrmALD2 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.10.3.8 |
mpbc2RURFL148xCaseTempMinSetThrDegCx10Case temperature minimum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.10.3.9 |
mpbc2RURFL148xCaseTempMinClearThrDegCx10Case temperature minimum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.10.3.10 |
mpbc2RURFL148xCaseTempMaxSetThrDegCx10Case temperature maximum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.10.3.11 |
mpbc2RURFL148xCaseTempMaxClearThrDegCx10Case temperature maximum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.10.3.12 |
mpbc2RURFL148xOutputPwrSetptMindBmx10Main output power minimum set point in dBm x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.10.3.13 |
mpbc2RURFL148xOutputPwrSetptMaxdBmx10Main output power maximum set point in dBm x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.10.3.14 |
mpbc2RURFL148xOSCModeOSC mode, 0: Dual-OSC, 3: Stand-Alone.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.10.3.15 |
mpbc2RULDP OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.11 |
mpbc2RULDPControl OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.11.1 |
mpbc2RULDPLaserModeLaser OFF(0), Laser APR(1).rw Enumeration .1.3.6.1.4.1.4464.2.2.11.1.1 |
mpbc2RULDPControlModeAPC(4)rw Unsigned32 .1.3.6.1.4.1.4464.2.2.11.1.2 |
mpbc2RULDP1stWLPwrSetPtmWWL1 Output power set point in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.11.1.3 |
mpbc2RULDP2ndWLPwrSetPtmWWL2 output power set point in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.11.1.4 |
mpbc2RULDPResetNormal = False(2), Reset = True(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.11.1.5 |
mpbc2RULDPMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.11.2 |
mpbc2RULDPLD1CurmALD1 Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.11.2.1 |
mpbc2RULDPLD1TempDegCx10LD1 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.11.2.2 |
mpbc2RULDPLD1TECCurmALD1 TEC Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.11.2.3 |
mpbc2RULDPLD2CurmALD2 Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.11.2.4 |
mpbc2RULDPLD2TempDegCx10LD2 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.11.2.5 |
mpbc2RULDPLD2TECCurmALD2 TEC Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.11.2.6 |
mpbc2RULDPCaseTempDegCx10Case Temperature in deg. C x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.11.2.7 |
mpbc2RULDPMon1stWLOutputPwrmWx10WL1 output power in mW x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.11.2.8 |
mpbc2RULDPMon2ndWLOutputPwrmWx10WL2 output power in mW x 10.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.11.2.9 |
mpbc2RULDPMonLaserStateLaser OFF(0), Laser ON(10), ALS(2), ALS100(3), Normal(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.11.2.10 |
mpbc2RULDPMonLaserModeLaser OFF(0), Laser ON(10), Laser APR(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.11.2.11 |
mpbc2RULDPMonControlModeACC(3), APC(4).ro Unsigned32 .1.3.6.1.4.1.4464.2.2.11.2.12 |
mpbc2RULDPDisableInputStateOff = 0, On = 1.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.11.2.13 |
mpbc2RULDPUnitStateInit(0), Normal(1), Fault(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.11.2.14 |
mpbc2RULDPOSCRxToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3).ro Enumeration .1.3.6.1.4.1.4464.2.2.11.2.15 |
mpbc2RULDPOSCTempDegCx10OSC temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.11.2.16 |
mpbc2RULDPOSCTxToneTone Off(0), Tone 1(1), Tone 2(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.11.2.17 |
mpbc2RULDPOSCTxPwrmWx100OSC Tx power in mW x 100, optional for model providing these featuresro INTEGER .1.3.6.1.4.1.4464.2.2.11.2.18 |
mpbc2RULDPConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.11.3 |
mpbc2RULDPLD1CurMinThrmALD1 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.11.3.1 |
mpbc2RULDPLD1CurMaxThrmALD1 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.11.3.2 |
mpbc2RULDPLD2CurMinThrmALD2 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.11.3.3 |
mpbc2RULDPLD2CurMaxThrmALD2 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.11.3.4 |
mpbc2RULDPCaseTempMinSetThrDegCx10Case temperature minimum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.11.3.5 |
mpbc2RULDPCaseTempMinClearThrDegCx10Case temperature minimum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.11.3.6 |
mpbc2RULDPCaseTempMaxSetThrDegCx10Case temperature maximum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.11.3.7 |
mpbc2RULDPCaseTempMaxClearThrDegCx10Case temperature maximum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.11.3.8 |
mpbc2RULDPCaseTempMinAlrmThDegCx10Case temperature minimum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.11.3.9 |
mpbc2RULDPCaseTempMaxAlrmThDegCx10Case temperature maximum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.11.3.10 |
mpbc2RULDP1stWLOutputPwrMinThrdBx10WL1 output maximum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.11.3.11 |
mpbc2RULDP1stWLOutputPwrMaxThrdBx10WL2 output minimum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.11.3.12 |
mpbc2RULDP2ndWLOutputPwrMinThrdBx10WL2 output minimum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.11.3.13 |
mpbc2RULDP2ndWLOutputPwrMaxThrdBx10WL2 output maximum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.11.3.14 |
mpbc2RULDP1stWLOutputPwrMinLimdBmx10WL1 output power minimum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.11.3.15 |
mpbc2RULDP1stWLOutputPwrMaxLimdBmx10WL1 output power maximum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.11.3.16 |
mpbc2RULDP2ndWLOutputPwrMinLimdBmx10WL2 output power minimum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.11.3.17 |
mpbc2RULDP2ndWLOutputPwrMaxLimdBmx10WL2 output power maximum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.11.3.18 |
mpbc2RUConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.12 |
mpbc2RUNetMgt OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.12.1 |
mpbc2RUNotifiedNMSipAddressTablePlease replace this text with your description. SEQUENCE OF Mpbc2RUNotifiedNMSipAddressEntry .1.3.6.1.4.1.4464.2.2.12.1.1 |
mpbc2RUNotifiedNMSipAddressEntryPlease replace this text with your description. Mpbc2RUNotifiedNMSipAddressEntry .1.3.6.1.4.1.4464.2.2.12.1.1.1 |
mpbc2RUNotifiedNMSipAddressIndexIndex INTEGER .1.3.6.1.4.1.4464.2.2.12.1.1.1.1 |
mpbc2RUNotifiedNMSipAddress_IPAddress to which agent shall send traps/Informs when mpbcRMH-NotifiedNMSipAddress-Enabled is true(1) except for the IP address set to a subnet loopback address 192.3.1.253rw IpAddress .1.3.6.1.4.1.4464.2.2.12.1.1.1.2 |
mpbc2RUNotifiedNMSipAddress_DescriptionA textual description of the notified manager station.rw OCTET STRING .1.3.6.1.4.1.4464.2.2.12.1.1.1.3 |
mpbc2RUNotifiedNMSipAddress_Enabledtrue(1) = send traps/Informs to corresponding notified manager station, false(2) = don't send trap/Informs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.12.1.1.1.4 |
mpbc2RUAckTrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.12.1.2 |
mpbc2RUAckTrapCriticalEnableTo Enable (1) or Disable (2) Critical Alarm Inform.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.12.1.2.1 |
mpbc2RUAckTrapCriticalRetriesNumber of retries (1..5).rw Unsigned32 .1.3.6.1.4.1.4464.2.2.12.1.2.2 |
mpbc2RUAckTrapCriticalTimeOutsecTimeOut (1..5) sec.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.12.1.2.3 |
mpbc2RUAckTrapMajorEnableTo Enable (1) or Disable (2) Major Alarm Inform.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.12.1.2.4 |
mpbc2RUAckTrapMajorRetriesNumber of retries (1..5).rw Unsigned32 .1.3.6.1.4.1.4464.2.2.12.1.2.5 |
mpbc2RUAckTrapMajorTimeOutsecTimeOut (1..5) sec.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.12.1.2.6 |
mpbc2RUAckTrapMinorEnableTo Enable (1) or Disable (2) Minor Alarm Inform.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.12.1.2.7 |
mpbc2RUAckTrapMinorRetriesNumber of retries (1..5).rw Unsigned32 .1.3.6.1.4.1.4464.2.2.12.1.2.8 |
mpbc2RUAckTrapMinorTimeOutsecTimeOut (1..5) sec.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.12.1.2.9 |
mpbc2RUAckTrapInformationalEnableTo Enable (1) or Disable (2) Informational Alarm Inform.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.12.1.2.10 |
mpbc2RUAckTrapInformationalRetriesNumber of retries (1..5).rw Unsigned32 .1.3.6.1.4.1.4464.2.2.12.1.2.11 |
mpbc2RUAckTrapInformationalTimeOutsecTimeOut (1..5) sec.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.12.1.2.12 |
mpbc2RUTrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.12.1.3 |
mpbc2RUTrapCriticalEnableTo Enable (1) or Disable (2) Critical Alarm Trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.12.1.3.1 |
mpbc2RUTrapMajorEnableTo Enable (1) or Disable (2) Major Alarm Trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.12.1.3.2 |
mpbc2RUTrapMinorEnableTo Enable (1) or Disable (2) Minor Alarm Trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.12.1.3.3 |
mpbc2RUTrapInformationalEnableTo Enable (1) or Disable (2) Informational Alarm Trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.12.1.3.4 |
mpbc2RUMacAddressMAC address of the card.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.1.4 |
mpbc2RUEthernetIPaddressNEM IP address.rw IpAddress .1.3.6.1.4.1.4464.2.2.12.1.5 |
mpbc2RUEthernetIPsubNetMaskNEM subnet mask.rw IpAddress .1.3.6.1.4.1.4464.2.2.12.1.6 |
mpbc2RUDefaultGatewayNEM default gateway address.rw IpAddress .1.3.6.1.4.1.4464.2.2.12.1.7 |
mpbc2RUSnmpTrapPortPlease replace this text with your description.ro INTEGER .1.3.6.1.4.1.4464.2.2.12.1.8 |
mpbc2RUNE OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.12.2 |
mpbc2RUNEIDPlease replace this text with your description.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.1 |
mpbc2RUInfoTablePlease replace this text with your description. SEQUENCE OF Mpbc2RUInfoEntry .1.3.6.1.4.1.4464.2.2.12.2.2 |
mpbc2RUInfoEntryPlease replace this text with your description. Mpbc2RUInfoEntry .1.3.6.1.4.1.4464.2.2.12.2.2.1 |
mpbc2RUInfoIndexIndex INTEGER .1.3.6.1.4.1.4464.2.2.12.2.2.1.1 |
mpbc2RUInfoLocPhysical location.. For 2RU products, it always returns 1ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.2 |
mpbc2RUInfoModelNumModel Number. Example: 2RU-SDP-R-3000.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.3 |
mpbc2RUInfoModelSNModel Serial Number. Example: 2RU-999-664.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.4 |
mpbc2RUInfoOEMPartNumOriginal Equipment Manufacturer Part Number. Example: A-09999-1_R0/0.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.5 |
mpbc2RUInfoAssyNumAssembly Part Number. Example: 5408ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.6 |
mpbc2RUInfoRevHardware Revision Number. Example: 0ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.7 |
mpbc2RUInfoECNECN level. Example: Zro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.8 |
mpbc2RUInfoSeqNumHardware Sequence Number. Example: 00792ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.9 |
mpbc2RUInfoMfgDateManufacturing Date in format Year/Week (YYWW) Ex: 0848ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.10 |
mpbc2RUInfoSwVerMCF52259 Firmware Version.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.11 |
mpbc2RUInfoBootLoaderRevMCF52259 Bootloader Software Revision.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.12 |
mpbc2RUInfoLibRevMCF52259 Library Software Revision.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.13 |
mpbc2RUInfoLddFw1Laser diode driver board 1 Software Revision.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.14 |
mpbc2RUInfoLddFw2Laser diode driver board 2 Software Revision.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.15 |
mpbc2RUInfoCLEITelcordia Common Language Equipment Identification.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.16 |
mpbc2RUInfoLastRmaDateLast RMA Date in format Year/Week (YYWW) Ex: 0848ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.2.1.17 |
mpbc2RUDateTimeFormat: YYYY-MM-DD hh:mm:ss. For example 2012-03-30 12:04:33 ---> Mar 30 12:04:33 2012 2012-03-30 16:04:33 ---> Mar 30 16:04:33 2012 Any mistake in the format shall be rejected by the NEM.rw OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.3 |
mpbc2RUSNMPAgentVersionSNMP Agent Version number and Date.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.4 |
mpbc2RUSNMPMIBVersionSNMP MIB Version Number.ro OCTET STRING .1.3.6.1.4.1.4464.2.2.12.2.5 |
mpbc2RUSNMPMemoryConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.12.3 |
mpbc2RUSNMPMemorySaveNot used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.12.3.1 |
mpbc2RUSNMPMemoryRestoreNot used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.12.3.2 |
mpbc2RUConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.13 |
mpbc2RUGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.13.1 |
mpbc2RUMibAllObjectsThis automatically created object group contains all those objects that do not belong to any other OBJECT-GROUP Unknown .1.3.6.1.4.1.4464.2.2.13.1.1 |
mpbc2RUMibAllNotificationsThis automatically created notification group contains all notifications that do not belong to any other NOTIFICATION-GROUP Unknown .1.3.6.1.4.1.4464.2.2.13.1.2 |
mpbc2ruMibAllObjectsThis automatically created object group contains all those objects that do not belong to any other OBJECT-GROUP Unknown .1.3.6.1.4.1.4464.2.2.13.1.3 |
mpbc2RUMLDS OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.14 |
mpbc2RUMLDSControl OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.14.1 |
mpbc2RUMLDSLaserModeLaser OFF(0), Laser APR(1).rw Enumeration .1.3.6.1.4.1.4464.2.2.14.1.1 |
mpbc2RUMLDSControlModeAPC(4)rw Unsigned32 .1.3.6.1.4.1.4464.2.2.14.1.2 |
mpbc2RUMLDS3rdWLPwrSetPtmWWL3 output power setpoint in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.14.1.3 |
mpbc2RUMLDS4thWLPwrSetPtmWWL4 output power setpoint in mW.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.14.1.4 |
mpbc2RUMLDSResetNormal = False(2), Reset = True(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.14.1.5 |
mpbc2RUMLDSMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.14.2 |
mpbc2RUMLDSLD1CurmALD1 Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.2.1 |
mpbc2RUMLDSLD1TempDegCx10LD1 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.14.2.2 |
mpbc2RUMLDSLD1TECCurmALD1 TEC Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.2.3 |
mpbc2RUMLDSLD2CurmALD2 Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.2.4 |
mpbc2RUMLDSLD2TempDegCx10LD2 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.14.2.5 |
mpbc2RUMLDSLD2TECCurmALD2 TEC Current in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.2.6 |
mpbc2RUMLDSCaseTempDegCx10Case temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.14.2.7 |
mpbc2RUMLDSMon3rdWLOutputPwrmWWL3 output power in mW.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.2.8 |
mpbc2RUMLDSMon4thWLOutputPwrmWWL4 output power in mW.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.2.9 |
mpbc2RUMLDSMonTotalOutputPwrmWOutput power monitor in mW.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.2.10 |
mpbc2RUMLDSInputPwrmWInput power monitor in mW.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.2.11 |
mpbc2RUMLDSMonLaserStateLaser OFF(0), Laser ON(10), ALS(2), ALS100(3), Normal(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.14.2.12 |
mpbc2RUMLDSMonLaserModeLaser OFF(0), Laser ON(10), Laser APR(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.14.2.13 |
mpbc2RUMLDSMonControlModeACC(3), APC(4).ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.2.14 |
mpbc2RUMLDSDisableInputStateOff = 0, On = 1.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.2.15 |
mpbc2RUMLDSUnitStateInit(0), Normal(1), Fault(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.14.2.16 |
mpbc2RUMLDSConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.14.3 |
mpbc2RUMLDSLD1CurMinThrmALD1 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.3.1 |
mpbc2RUMLDSLD1CurMaxThrmALD1 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.3.2 |
mpbc2RUMLDSLD2CurMinThrmALD2 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.3.3 |
mpbc2RUMLDSLD2CurMaxThrmALD2 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.14.3.4 |
mpbc2RUMLDSCaseTempMinSetThrDegCx10Case temperature minimum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.14.3.5 |
mpbc2RUMLDSCaseTempMinClearThrDegCx10Case temperature minimum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.14.3.6 |
mpbc2RUMLDSCaseTempMaxSetThrDegCx10Case temperature maximum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.14.3.7 |
mpbc2RUMLDSCaseTempMaxClearThrDegCx10Case temperature maximum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.14.3.8 |
mpbc2RUMLDSCaseTempMinAlrmThrDegCx10Case temperature minimum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.14.3.9 |
mpbc2RUMLDSCaseTempMaxAlrmThrDegCx10Case temperature maximum alarm threshold in deg. Celsius x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.14.3.10 |
mpbc2RUMLDS3rdWLOutputPwrMinThrdBx10WL3 output minimum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.14.3.11 |
mpbc2RUMLDS3rdWLOutputPwrMaxThrdBx10WL3 output maximum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.14.3.12 |
mpbc2RUMLDS4thWLOutputPwrMinThrdBx10WL4 output minimum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.14.3.13 |
mpbc2RUMLDS4thWLOutputPwrMaxThrdBx10WL4 output maximum threshold in dB x 10, relative to set point.rw INTEGER .1.3.6.1.4.1.4464.2.2.14.3.14 |
mpbc2RUMLDS3rdWLOutputPwrMinLimdBmx10WL3 output power minimum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.14.3.15 |
mpbc2RUMLDS3rdWLOutputPwrMaxLimdBmx10WL3 output power maximum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.14.3.16 |
mpbc2RUMLDS4thWLOutputPwrMinLimdBmx10WL4 output power minimum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.14.3.17 |
mpbc2RUMLDS4thWLOutputPwrMaxLimdBmx10WL4 output power maximum limit in dBm x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.14.3.18 |
mpbc2RUMLDSLOSSetThrdBmx100LOS Set threshold in dBm x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.14.3.19 |
mpbc2RUMLDSLOSClearThrdBmx100LOS Clear threshold in dBm x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.14.3.20 |
mpbc2RUPxxH OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.15 |
mpbc2RUPxxHControl OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.15.1 |
mpbc2RUPxxHLaserModeLaser OFF(0), Laser APR(1).rw Enumeration .1.3.6.1.4.1.4464.2.2.15.1.1 |
mpbc2RUPxxHControlModeAPC(4), AGC(5).rw INTEGER .1.3.6.1.4.1.4464.2.2.15.1.2 |
mpbc2RUPxxHPwrSetPtmWEDFA output power setpoint in mW. (For APC mode)rw INTEGER .1.3.6.1.4.1.4464.2.2.15.1.3 |
mpbc2RUPxxHGainSetPtdBx10EDFA gain setpoint in dB x10. (For AGC mode)rw Integer32 .1.3.6.1.4.1.4464.2.2.15.1.4 |
mpbc2RUPxxHVOASettingdBx10VOA setting in dB x 10. (If the VOA is not present this object shows zero)rw Integer32 .1.3.6.1.4.1.4464.2.2.15.1.5 |
mpbc2RUPxxHResetNormal = False(2), Reset = True(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4464.2.2.15.1.6 |
mpbc2RUPxxHMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.15.2 |
mpbc2RUPxxHLD1CurmALD1 Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.15.2.1 |
mpbc2RUPxxHLD1TempDegCx10LD1 temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.15.2.2 |
mpbc2RUPxxHLD1TECCurmALD1 TEC Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.15.2.3 |
mpbc2RUPxxHLD1BackFacetPwrmWx100LD1 back facet power in mW x 100ro Unsigned32 .1.3.6.1.4.1.4464.2.2.15.2.4 |
mpbc2RUPxxHLD2CurmALD2 Current in mAro Unsigned32 .1.3.6.1.4.1.4464.2.2.15.2.5 |
mpbc2RUPxxHCaseTempDegCx10Case temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.15.2.6 |
mpbc2RUPxxH148xPumpPwrmW148x Pump power in mWro Unsigned32 .1.3.6.1.4.1.4464.2.2.15.2.7 |
mpbc2RUPxxHOutputPwrmWOutput power in mWro Unsigned32 .1.3.6.1.4.1.4464.2.2.15.2.8 |
mpbc2RUPxxHGaindBx10Gain in dB x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.15.2.9 |
mpbc2RUPxxHInputPwrmWx100Input power in mW x 100.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.15.2.10 |
mpbc2RUPxxHBackReflPwrmWx100Back-reflection power in mW x 100.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.15.2.11 |
mpbc2RUPxxHMonLaserStateLaser OFF(0), Laser ON(10), ALS(2), ALS100(3), Normal(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.15.2.12 |
mpbc2RUPxxHMonLaserModeLaser OFF(0), Laser ON(10), Laser APR(1).ro Enumeration .1.3.6.1.4.1.4464.2.2.15.2.13 |
mpbc2RUPxxHMonControlModeMonitor laser control mode ACC(3), APC(4), AGC(5).ro INTEGER .1.3.6.1.4.1.4464.2.2.15.2.14 |
mpbc2RUPxxHDisableInputStateOff = 0, On = 1.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.15.2.15 |
mpbc2RUPxxHUnitStateInit(0), Normal(1), Fault(2)ro Enumeration .1.3.6.1.4.1.4464.2.2.15.2.16 |
mpbc2RUPxxHOSCRxToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3)ro Enumeration .1.3.6.1.4.1.4464.2.2.15.2.17 |
mpbc2RUPxxHOSCTempdegCx10OSC temperature in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.15.2.18 |
mpbc2RUPxxHOSCTxToneTone Off(0), Tone 1(1), Tone 2(2).ro Enumeration .1.3.6.1.4.1.4464.2.2.15.2.19 |
mpbc2RUPxxHOSCTxPwrmWx100OSC Tx power in mW x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.15.2.20 |
mpbc2RUPxxHOSCRx1610ToneNo Tone(0), Tone 1(1), Tone 2(2), Tone1+2(3). (If Not in OSC Mode with ROPA, this object shows zero)ro Enumeration .1.3.6.1.4.1.4464.2.2.15.2.21 |
mpbc2RUPxxHMonVOASettingdBx10VOA setting in dB x 10. (If the VOA is not present this object shows zero)ro INTEGER .1.3.6.1.4.1.4464.2.2.15.2.22 |
mpbc2RUPxxHConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.4464.2.2.15.3 |
mpbc2RUPxxHLD1CurMinThrmALD1 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.15.3.1 |
mpbc2RUPxxHLD2CurMinThrmALD2 current minimum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.15.3.2 |
mpbc2RUPxxHLD1CurMaxThrmALD1 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.15.3.3 |
mpbc2RUPxxHLD2CurMaxThrmALD2 current maximum threshold in mA.ro Unsigned32 .1.3.6.1.4.1.4464.2.2.15.3.4 |
mpbc2RUPxxHCaseTempMinSetThrDegCx10Case temperature minimum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.15.3.5 |
mpbc2RUPxxHCaseTempMinClearThrDegCx10Case temperature minimum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.15.3.6 |
mpbc2RUPxxHCaseTempMaxSetThrDegCx10Case temperature maximum set threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.15.3.7 |
mpbc2RUPxxHCaseTempMaxClearThrDegCx10Case temperature maximum clear threshold in deg. Celsius x 10.ro INTEGER .1.3.6.1.4.1.4464.2.2.15.3.8 |
mpbc2RUPxxHCaseTempMinAlrmThrDegCx10Case temperature minimum alarm threshold in deg. Celsius x 10rw INTEGER .1.3.6.1.4.1.4464.2.2.15.3.9 |
mpbc2RUPxxHCaseTempMaxAlrmThrDegCx10Case temperature maximum alarm threshold in deg. Celsius x 10rw INTEGER .1.3.6.1.4.1.4464.2.2.15.3.10 |
mpbc2RUPxxHLOSSetThrdBmx100LOS Set threshold in dBm x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.15.3.11 |
mpbc2RUPxxHLOSClearThrdBmx100LOS Clear threshold in dBm x 100.ro INTEGER .1.3.6.1.4.1.4464.2.2.15.3.12 |
mpbc2RUPxxHInputMinThrdBmx100Input power minimum threshold in dBm x 100.rw INTEGER .1.3.6.1.4.1.4464.2.2.15.3.13 |
mpbc2RUPxxHInputMaxThrdBmx100Input power maximum threshold in dBm x 100.rw INTEGER .1.3.6.1.4.1.4464.2.2.15.3.14 |
mpbc2RUPxxHOutputMinThrdBx10Output power minimum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.15.3.15 |
mpbc2RUPxxHOutputMaxThrdBx10Output power maximum threshold relative to set point in dB x 10.rw INTEGER .1.3.6.1.4.1.4464.2.2.15.3.16 |
mpbc2RUPxxHOSCModeOSC mode, 0: Stand-alone, 1: ROPA.rw Unsigned32 .1.3.6.1.4.1.4464.2.2.15.3.17 |
mpbc2RUPxxHOutputSetptminLimdBmx10Output set point minimum limit in dBm x 10ro INTEGER .1.3.6.1.4.1.4464.2.2.15.3.18 |
mpbc2RUPxxHOutputSetptmaxLimdBmx10Output set point maximum limit in dBm x 10ro INTEGER .1.3.6.1.4.1.4464.2.2.15.3.19 |
mpbc2RUPxxHGainSetptminLimdBx10Gain set point minimum limit in dB x 10ro INTEGER .1.3.6.1.4.1.4464.2.2.15.3.20 |
mpbc2RUPxxHGainSetptmaxLimdBx10Gain set point maximum limit in dB x 10ro INTEGER .1.3.6.1.4.1.4464.2.2.15.3.21 |