MOXA-EDSP510A8POE-MIB
AI MIB Summary
The MOXA-EDSP510A8POE-MIB provides vendor-specific SNMP management capabilities for the Moxa EDSP510A-8PoE managed Ethernet switch, enabling monitoring of port status, PoE power allocation, interface statistics, and device environmental parameters.
The MIB module for Moxa EDSP510A-8PoE series specific information.
Main OID:
edsp510a8poe.1.3.6.1.4.1.8691.7.86
522
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
522 total| Object Name |
|---|
moxa OBJECT IDENTIFIER .1.3.6.1.4.1.8691 |
industrialEthernet OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7 |
edsp510a8poeThe MIB module for Moxa EDSP510A-8PoE series specific information. MODULE-IDENTITY .1.3.6.1.4.1.8691.7.86 |
mibNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.0 |
configChangeTrapThe configuration has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.8691.7.86.0.1 |
power1TrapThe power on/off changed. NOTIFICATION-TYPE .1.3.6.1.4.1.8691.7.86.0.2 |
power2TrapThe power on/off changed. NOTIFICATION-TYPE .1.3.6.1.4.1.8691.7.86.0.3 |
trafficOverloadTrapThe ethernet port's traffic loading exceeds the pre-defined value. NOTIFICATION-TYPE .1.3.6.1.4.1.8691.7.86.0.4 |
redundancyTopologyChangedTrapThe redundancy topology has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.8691.7.86.0.5 |
turboRingCouplingPortChangedTrapThe coupling path of Turbo Ring has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.8691.7.86.0.6 |
turboRingMasterChangedTrapThe master of Turbo Ring has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.8691.7.86.0.7 |
swMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1 |
numberOfPortsTotal Ports.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.1 |
switchModelThe switch model.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.2 |
firmwareVersionThe firmware version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.4 |
enableWebConfigThis enable the Web. configuration function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.5 |
enableTelnetConsoleThis enable telnet console.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.6 |
lineSwapRecoveryThis enable line-swap-fast-recovery function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.7 |
networkSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.8 |
switchIpAddrThe IP Address of this switch.ro IpAddress .1.3.6.1.4.1.8691.7.86.1.8.1 |
switchIpMaskThe netmask of this switch.ro IpAddress .1.3.6.1.4.1.8691.7.86.1.8.2 |
defaultGatewayThe default gateway of this switch.ro IpAddress .1.3.6.1.4.1.8691.7.86.1.8.3 |
enableAutoIpConfigThis enable the automatic IP address configuration function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.8.4 |
dnsServer1IpAddrThe first DNS server's IP addressrw IpAddress .1.3.6.1.4.1.8691.7.86.1.8.5 |
snmpTrapCommunityThe SNMP trap community namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.8.6 |
trapServerAddrThe IP address/Domain name of SNMP trap serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.8.7 |
dnsServer2IpAddrThe second DNS server's IP addressrw IpAddress .1.3.6.1.4.1.8691.7.86.1.8.8 |
snmpReadCommunityThe SNMP read community namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.8.9 |
snmpTrap2CommunityThe Second SNMP trap community namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.8.11 |
trap2ServerAddrThe IP address/Domain name of Second SNMP trap serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.8.12 |
snmpInformEnableThis enable the snmpInform function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.8.13 |
snmpInformRetriesThe snmp inform retry times of SNMP trap serverrw INTEGER .1.3.6.1.4.1.8691.7.86.1.8.14 |
snmpInformTimeoutThe snmp inform interval of SNMP trap serverrw INTEGER .1.3.6.1.4.1.8691.7.86.1.8.15 |
dhcpRetryPeriodsThe DHCP retry periods.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.8.16 |
dhcpRetryTimesThe dhcp retry times.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.8.17 |
portSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.9 |
portTableThe port table. SEQUENCE OF PortEntry .1.3.6.1.4.1.8691.7.86.1.9.1 |
portEntryThe port entry. PortEntry .1.3.6.1.4.1.8691.7.86.1.9.1.1 |
portIndexThe port index.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.9.1.1.1 |
portDescThe port descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.9.1.1.2 |
portEnableThis enable the port.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.9.1.1.3 |
portSpeedThe port speed and duplex.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.9.1.1.4 |
portMDIThe port MDI/MDIX.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.9.1.1.5 |
portFDXFlowCtrlThe port FDX Flow Controlrw Enumeration .1.3.6.1.4.1.8691.7.86.1.9.1.1.6 |
portNameThe port Namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.9.1.1.7 |
monitor OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.10 |
power1InputStatusThe status of the first power input.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.10.1 |
power2InputStatusThe status of the second power input.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.10.2 |
monitorPortTableThe port table of monitor function. SEQUENCE OF MonitorPortEntry .1.3.6.1.4.1.8691.7.86.1.10.3 |
monitorPortEntryThe port table entry of monitor function. MonitorPortEntry .1.3.6.1.4.1.8691.7.86.1.10.3.1 |
monitorLinkStatusThe port link status.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.10.3.1.2 |
monitorSpeedThe port speed and duplex status.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.10.3.1.3 |
monitorAutoMDIThe port MDI/MDIX status.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.10.3.1.4 |
monitorTrafficThe traffic loading percentage of port.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.10.3.1.5 |
monitorFDXFlowCtrlThe Full-Duplex flow control statusro Enumeration .1.3.6.1.4.1.8691.7.86.1.10.3.1.6 |
monitorTxTrafficThe TX traffic loading percentage of port.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.10.3.1.7 |
monitorRxTrafficThe RTX traffic loading percentage of port.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.10.3.1.8 |
monitorDiTableThe DI table of monitor function. SEQUENCE OF MonitorDiEntry .1.3.6.1.4.1.8691.7.86.1.10.4 |
monitorDiEntryThe DI table entry of monitor function. MonitorDiEntry .1.3.6.1.4.1.8691.7.86.1.10.4.1 |
diIndexThe DI index of monitor functionro INTEGER .1.3.6.1.4.1.8691.7.86.1.10.4.1.1 |
diInputStatusThe DI input status.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.10.4.1.2 |
monitorSFPTableThe SFP table of monitor function. SEQUENCE OF MonitorSFPEntry .1.3.6.1.4.1.8691.7.86.1.10.7 |
monitorSFPEntryThe SFP table entry of monitor function. MonitorSFPEntry .1.3.6.1.4.1.8691.7.86.1.10.7.1 |
sfpPortThe SPF index of monitor functionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.10.7.1.1 |
sfpModelNameThe SPF ModelName of monitor functionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.10.7.1.2 |
sfpTemperatureThe SPF Temperature of monitor functionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.10.7.1.3 |
sfpVoltageThe SPF Voltage of monitor functionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.10.7.1.4 |
sfpTxPowerThe SPF TX power of monitor functionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.10.7.1.5 |
sfpRXPowerThe SPF RX power of monitor functionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.10.7.1.6 |
emailWarning OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.11 |
emailService OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.11.1 |
emailWarningMailServerThe email server's Ip Address/Domain name of email warning function.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.11.1.1 |
emailWarningFirstEmailAddrThe first email address of email warning function.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.11.1.2 |
emailWarningSecondEmailAddrThe second email address of email warning function.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.11.1.3 |
emailWarningThirdEmailAddrThe third email address of email warning function.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.11.1.4 |
emailWarningFourthEmailAddrThe fourth email address of email warning function.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.11.1.5 |
emailWarningSMTPPortThe email server's SMTP port of email warning function.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.11.1.6 |
emailWarningEventType OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.11.2 |
emailWarningEventServerColdStartThe switch cold start event of email warning function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.11.2.1 |
emailWarningEventServerWarmStartThe switch warm start event of email warning function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.11.2.2 |
emailWarningEventConfigChangeThe configuration changed event of email warning function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.11.2.3 |
emailWarningEventPowerOn2OffThe power on event of email warning function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.11.2.4 |
emailWarningEventPowerOff2OnThe power off event of email warning function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.11.2.5 |
emailWarningEventAuthFailThe authentication fail event of email warning function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.11.2.6 |
emailWarningEventTopologyChangedThe communication redundancy topology changed event of email warning function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.11.2.7 |
emailWarningEventPortTableThe port table of the email warning event. SEQUENCE OF EmailWarningEventPortEntry .1.3.6.1.4.1.8691.7.86.1.11.3 |
emailWarningEventPortEntryThe port table entry of the email warning event. EmailWarningEventPortEntry .1.3.6.1.4.1.8691.7.86.1.11.3.1 |
emailWarningEventPortLinkOnThe port link on event of email warning function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.11.3.1.2 |
emailWarningEventPortLinkOffThe port link off event of email warning function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.11.3.1.3 |
emailWarningEventPortTrafficOverloadThe port's traffic overloading event of email warning function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.11.3.1.4 |
emailWarningEventPortRxTrafficThresholdThe port's traffic threshold of the overloading event.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.11.3.1.5 |
emailWarningEventPortTrafficDurationThe port's traffic duration of the overloading event.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.11.3.1.6 |
emailWarningEventDiTableThe DI table of the email warning event. SEQUENCE OF EmailWarningEventDiEntry .1.3.6.1.4.1.8691.7.86.1.11.4 |
emailWarningEventDiEntryThe DI table entry of the email warning event. EmailWarningEventDiEntry .1.3.6.1.4.1.8691.7.86.1.11.4.1 |
emailWarningEventDiInputOn2OffThe DI input off event of email warning function .rw Enumeration .1.3.6.1.4.1.8691.7.86.1.11.4.1.1 |
emailWarningEventDiInputOff2OnThe DI input on event of email warning function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.11.4.1.2 |
setDeviceIp OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.12 |
setDevIpTableThe set device IP table. SEQUENCE OF SetDevIpEntry .1.3.6.1.4.1.8691.7.86.1.12.1 |
setDevIpEntryThe set device IP table entry. SetDevIpEntry .1.3.6.1.4.1.8691.7.86.1.12.1.1 |
setDevIpIndexThe set device IP index.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.12.1.1.1 |
setDevIpCurrentIpofDeviceThe current IP address of connected to this port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.12.1.1.2 |
setDevIpPresentByThe protocol used that assigning IP to the device.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.12.1.1.3 |
setDevIpDedicatedIpThe IP address when assign to the device connected to this port.rw IpAddress .1.3.6.1.4.1.8691.7.86.1.12.1.1.4 |
mirroring OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.13 |
targetPortThe mirrored port of mirroring function.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.13.1 |
mirroringPortThe mirroring port of mirroring function.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.13.2 |
monitorDirectionThe traffic direction of mirroring function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.13.3 |
portTrunking OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.14 |
trunkSettingTablePort Trunking Setting Table. SEQUENCE OF TrunkSettingEntry .1.3.6.1.4.1.8691.7.86.1.14.1 |
trunkSettingEntryPort Trunking Setting Entry. TrunkSettingEntry .1.3.6.1.4.1.8691.7.86.1.14.1.1 |
trunkSettingIndexTrunking Group Index.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.14.1.1.1 |
trunkTypeTrunking Group Type.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.14.1.1.2 |
trunkMemberPortsTrunking Group Member Ports.rw PortList .1.3.6.1.4.1.8691.7.86.1.14.1.1.3 |
trunkTablePort Trunking Table. SEQUENCE OF TrunkEntry .1.3.6.1.4.1.8691.7.86.1.14.2 |
trunkEntryPort Trunking Entry. TrunkEntry .1.3.6.1.4.1.8691.7.86.1.14.2.1 |
trunkIndexTrunking Group Index.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.14.2.1.1 |
trunkPortTrunking Group Member Port.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.14.2.1.2 |
trunkStatusTrunking Port Status.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.14.2.1.3 |
commRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.16 |
protocolOfRedundancySetupThis set the redundancy protocol of this switch.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.1 |
turboRing OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.16.2 |
turboRingMasterIs this a Master or Slave.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.2.1 |
turboRingMasterSetupSet this to be Master.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.2.2 |
turboRingPortTableTurbo Ring Port Table. SEQUENCE OF TurboRingPortEntry .1.3.6.1.4.1.8691.7.86.1.16.2.3 |
turboRingPortEntryTurbo Ring Port Entry. TurboRingPortEntry .1.3.6.1.4.1.8691.7.86.1.16.2.3.1 |
turboRingPortIndexTurbo Ring Port Index.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.16.2.3.1.1 |
turboRingPortStatusTurbo Ring Port Status.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.2.3.1.2 |
turboRingPortDesignatedBridgeThe MAC address of the bridge which this port considers to be the Designated Bridge for this port's segment.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.16.2.3.1.3 |
turboRingPortDesignatedPortThe Port Number of the port on the Designated Bridge for this port's segment.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.16.2.3.1.4 |
turboRingDesignatedMasterThe MAC address of the bridge which is the Master of the TURBO RING.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.16.2.6 |
turboRingRdntPort1The port number of 1st Redundant Port on the TURBO RING.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.2.7 |
turboRingRdntPort2The port number of 2nd Redundant Port on the TURBO RING.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.2.8 |
turboRingEnableCouplingThis enable the ring coupling function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.2.9 |
turboRingCouplingPortThe coupling port of ring coupling function.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.2.10 |
turboRingCouplingPortStatusThe coupling port status of ring coupling function.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.2.11 |
turboRingControlPortThe control port of ring coupling function.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.2.12 |
turboRingControlPortStatusThe control port status of ring coupling function.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.2.13 |
turboRingBrokenStatusTurbo Ring broken display.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.2.14 |
spanningTree OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.16.3 |
spanningTreeRootThe root of spanning tree.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.3.1 |
spanningTreeBridgePriorityThe bridge priority of spanning tree protocol.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.3.2 |
spanningTreeHelloTimeThe hello time of spanning tree protocol.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.3.3 |
spanningTreeMaxAgeThe max. age of spanning tree protocol.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.3.4 |
spanningTreeForwardingDelayTje forwarding delay of spanning tree protocol.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.3.5 |
spanningTreeTableThe spanning tree table. SEQUENCE OF SpanningTreeEntry .1.3.6.1.4.1.8691.7.86.1.16.3.6 |
spanningTreeEntryThe spanning tree port entry. SpanningTreeEntry .1.3.6.1.4.1.8691.7.86.1.16.3.6.1 |
spanningTreeIndexThe index of spanning tree table.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.16.3.6.1.1 |
enableSpanningTreeThis enable of spanning tree protocol for this port.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.3.6.1.2 |
spanningTreePortPriorityThe port priority of spanning tree protocol.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.3.6.1.3 |
spanningTreePortCostThe port cost of spanning tree protocol.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.3.6.1.4 |
spanningTreePortStatusThe port status of spanning tree protocol.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.3.6.1.5 |
spanningTreePortEdgeThis configures the Edge Port property for this port.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.3.6.1.6 |
activeProtocolOfRedundancyThis shows the active redundancy protocol of this switch now. The none(0) status will be showed if only if the switch's redundancy protocol is set to spanning tree and none of ports enable spanning tree.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.4 |
turboRingV2 OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.16.5 |
turboRingV2Ring1 OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.16.5.1 |
ringIndexRing1The turboRingV2 Ring Index.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.16.5.1.1 |
ringEnableRing1The turboRingV2 Ring1 enable config.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.1.2 |
masterSetupRing1Is this a Master or Slave.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.1.3 |
masterStatusRing1Set this to be Master.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.1.4 |
designatedMasterRing1The MAC address of the bridge which is the Master of the turboRingV2.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.16.5.1.5 |
rdnt1stPortRing1The port number of 1st Redundant Port on the turboRingV2.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.5.1.6 |
rdnt1stPortStatusRing1The status of 1st Redundant Port on the turboRingV2.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.1.7 |
rdnt2ndPortRing1The port number of 2nd Redundant Port on the turboRingV2.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.5.1.8 |
rdnt2ndPortStatusRing1The status of 2nd Redundant Port on the turboRingV2.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.1.9 |
brokenStatusRing1turboRingV2 broken display.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.1.10 |
turboRingV2Ring2 OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.16.5.2 |
ringIndexRing2The turboRingV2 Ring Index.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.16.5.2.1 |
ringEnableRing2The turboRingV2 Ring2 enable config.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.2.2 |
masterSetupRing2Is this a Master or Slave.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.2.3 |
masterStatusRing2Set this to be Master.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.2.4 |
designatedMasterRing2The MAC address of the bridge which is the Master of the turboRingV2.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.16.5.2.5 |
rdnt1stPortRing2The port number of 1st Redundant Port on the turboRingV2.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.5.2.6 |
rdnt1stPortStatusRing2The status of 1st Redundant Port on the turboRingV2.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.2.7 |
rdnt2ndPortRing2The port number of 2nd Redundant Port on the turboRingV2.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.5.2.8 |
rdnt2ndPortStatusRing2The status of 2nd Redundant Port on the turboRingV2.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.2.9 |
brokenStatusRing2turboRingV2 broken display.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.2.10 |
turboRingV2Coupling OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.16.5.3 |
couplingEnableSetting the ring coupling enable.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.3.1 |
couplingModeSetting the ring coupling mode.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.3.2 |
coupling1stPortIf in 'DUAL HOMING' mode, port name is 'Primary port'; if in 'COUPLING' mode, port name is 'Coupling port'rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.5.3.3 |
coupling1stPortStatusThe 1st coupling port status of coupling function.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.3.4 |
coupling2ndPortIf in 'DUAL HOMING' mode, port name is 'Backup port'; if in 'COUPLING' mode, port name is no used.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.5.3.5 |
coupling2ndPortStatusThe 2nd coupling port status of coupling function.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.5.3.6 |
turboChain OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.16.6 |
turboChainRoleThe Role of TURBO CHAIN.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.16.6.1 |
turboChainPort1The port number of 1st Redundant Port on the TURBO CHAIN. If switch role is Turbo Chain Head, this is Head port, If Switch role is Turbo Chain Tail, this is Tail port.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.6.2 |
turboChainPort2The port number of 2nd Redundant Port on the TURBO CHAIN. It is the member port of TurboChainrw INTEGER .1.3.6.1.4.1.8691.7.86.1.16.6.3 |
turboChainPort1StatusTurbo Chain Port Status.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.6.4 |
turboChainPort2StatusTurbo Chain Port Status.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.16.6.5 |
turboChainPort1PartnerBridgeThe MAC address of the next bridgero MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.16.6.6 |
turboChainPort2PartnerBridgeThe MAC address of the neighbor Turbo Chain switchro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.16.6.7 |
relayWarning OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.17 |
relayWarningTableThe relay warning table. SEQUENCE OF RelayWarningEntry .1.3.6.1.4.1.8691.7.86.1.17.11 |
relayWarningEntryRelay Warning Entry. RelayWarningEntry .1.3.6.1.4.1.8691.7.86.1.17.11.1 |
relayAlarmIndexThe Relay alarm index.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.17.11.1.1 |
relayWarningRelayContactThe first Relay contact status.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.17.11.1.2 |
overrideRelayWarningSettingOverride the relay warning setting.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.17.11.1.3 |
relayWarningPower1OffThe relay contact will be opened while the first power input off.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.17.11.1.4 |
relayWarningPower1OffStatusThe relay contact is opened as the first power input off..ro Enumeration .1.3.6.1.4.1.8691.7.86.1.17.11.1.5 |
relayWarningPower2OffThe relay contact will be opened while the second power input off.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.17.11.1.6 |
relayWarningPower2OffStatusThe relay contact is opened as the second power input off.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.17.11.1.7 |
relayWarningTurboRingBreakThe relay contact will be opened while turbo ring break.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.17.11.1.8 |
relayWarningTurboRingBreakStatusThe relay contact is opened while turbo ring is broken.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.17.11.1.9 |
portRelayWarningTableThe relay warning port table. SEQUENCE OF PortRelayWarningEntry .1.3.6.1.4.1.8691.7.86.1.17.12 |
portRelayWarningEntryPort Relay Warning Entry. PortRelayWarningEntry .1.3.6.1.4.1.8691.7.86.1.17.12.1 |
relayWarningLinkChangedThe relay contact will be opened while this port's link status is changed.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.17.12.1.1 |
relayWarningLinkChangedStatusThe relay contact is opened as this port's link status is changed.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.17.12.1.2 |
relayWarningTrafficOverloadThe relay contact will be opened while this port's traffic is overload.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.17.12.1.3 |
relayWarningTrafficOverloadStatusThe relay contact is opened as this port's traffic is overload.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.17.12.1.4 |
relayWarningRxTrafficThresholdThe threshold of the port traffic will be over loading.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.17.12.1.5 |
relayWarningTrafficDurationThe duration of the port traffic will be over loading.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.17.12.1.6 |
diRelayWarningTableThe relay warning DI table. SEQUENCE OF DiRelayWarningEntry .1.3.6.1.4.1.8691.7.86.1.17.13 |
diRelayWarningEntryDI Relay Warning Entry. DiRelayWarningEntry .1.3.6.1.4.1.8691.7.86.1.17.13.1 |
relayWarningDiInputChangedThe relay contact will be opened while the DI input changed.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.17.13.1.1 |
relayWarningDiInputChangedStatusThe relay contact is opened as the first DI input changed..ro Enumeration .1.3.6.1.4.1.8691.7.86.1.17.13.1.2 |
trafficPrioritization OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.18 |
qosClassification OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.18.1 |
queuingMechanismThe queuing mechanism.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.18.1.1 |
qosPortTableThe QoS port table. SEQUENCE OF QosPortEntry .1.3.6.1.4.1.8691.7.86.1.18.1.2 |
qosPortEntryThe QoS Port Entry. QosPortEntry .1.3.6.1.4.1.8691.7.86.1.18.1.2.1 |
inspectTosThis enable the inspection of TOS field.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.18.1.2.1.1 |
inspectCosThis enable the inspection of CoS field.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.18.1.2.1.2 |
portPriorityThe default priority of the port.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.18.1.2.1.3 |
cosMapping OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.18.2 |
cosMappingTableThe COS mapping table. SEQUENCE OF CosMappingEntry .1.3.6.1.4.1.8691.7.86.1.18.2.1 |
cosMappingEntryThe COS mapping Entry. CosMappingEntry .1.3.6.1.4.1.8691.7.86.1.18.2.1.1 |
cosTagThe cos tag of TOS field.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.18.2.1.1.1 |
cosMappedPriorityThe frame's priority corresponding to it's COS tag value.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.18.2.1.1.2 |
tosMapping OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.18.3 |
tosMappingTableThe TOS mapping table. SEQUENCE OF TosMappingEntry .1.3.6.1.4.1.8691.7.86.1.18.3.1 |
tosMappingEntryTOS mapping Entry. TosMappingEntry .1.3.6.1.4.1.8691.7.86.1.18.3.1.1 |
tosClassThe TOS class of TOS field.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.18.3.1.1.1 |
tosMappedPriorityThe frame's priority corresponding to it's TOS class value.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.18.3.1.1.2 |
vlan OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.19 |
vlanPortSettingTableThe vlan setting table of ports. SEQUENCE OF VlanPortSettingEntry .1.3.6.1.4.1.8691.7.86.1.19.1 |
vlanPortSettingEntryPort Setting Entry of VLAN. VlanPortSettingEntry .1.3.6.1.4.1.8691.7.86.1.19.1.1 |
portVlanTypeThe vlan type of port.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.19.1.1.1 |
portDefaultVidThe PVID of port.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.19.1.1.2 |
portFixedVidThe fixed vids of (trunk) port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.19.1.1.3 |
portForbiddenVidThe forbidden vids of (trunk)port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.19.1.1.4 |
portFixedVidUntagThe fixed untag vids of (trunk) port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.19.1.1.5 |
vlanTableThe VLAN table. SEQUENCE OF VlanEntry .1.3.6.1.4.1.8691.7.86.1.19.2 |
vlanEntryVLAN Entry. VlanEntry .1.3.6.1.4.1.8691.7.86.1.19.2.1 |
vlanIdThe VLAN id.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.19.2.1.1 |
joinedAccessPortsThe access ports that joined this VID.ro PortList .1.3.6.1.4.1.8691.7.86.1.19.2.1.2 |
joinedTrunkPortsThe trunk ports that joined this VID.ro PortList .1.3.6.1.4.1.8691.7.86.1.19.2.1.3 |
joinedHybridPortsThe hybrid ports that joined this VID.ro PortList .1.3.6.1.4.1.8691.7.86.1.19.2.1.4 |
managementVlanIdThe management VLAN id.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.19.3 |
vlanTypeVLAN Type.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.19.4 |
portbaseVlanSettingTablePort base Vlan Setting Table. SEQUENCE OF PortbaseVlanSettingEntry .1.3.6.1.4.1.8691.7.86.1.19.5 |
portbaseVlanSettingEntryPort base Vlan Setting Entry. PortbaseVlanSettingEntry .1.3.6.1.4.1.8691.7.86.1.19.5.1 |
portbaseVlanSettingIndexport base Vlan Group Index.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.19.5.1.1 |
portbaseVlanMemberPortsport base Vlan Group Member Ports.rw PortList .1.3.6.1.4.1.8691.7.86.1.19.5.1.2 |
enableGvrpEnable GVRP.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.19.6 |
multicastFiltering OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.20 |
igmpSnooping OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.20.1 |
querierQueryIntervalThis query interval of the querier function for this VLAN.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.20.1.1 |
igmpSnoopingSettingTableThe IGMP snooping setting table. SEQUENCE OF IgmpSnoopingSettingEntry .1.3.6.1.4.1.8691.7.86.1.20.1.2 |
igmpSnoopingSettingEntryThe IGMP snooping setting Entry. IgmpSnoopingSettingEntry .1.3.6.1.4.1.8691.7.86.1.20.1.2.1 |
enableIgmpSnoopingThis enable the IGMP snooping function in this VLAN.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.20.1.2.1.1 |
enableQuerierThis enable the querier function for this VLAN.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.20.1.2.1.2 |
fixedMulticastQuerierPortsThe ports that multicast-Querier exist.rw PortList .1.3.6.1.4.1.8691.7.86.1.20.1.2.1.3 |
learnedMulticastQuerierPortsThe ports that multicast-Querier exist.ro PortList .1.3.6.1.4.1.8691.7.86.1.20.1.2.1.4 |
enableGlobalIgmpSnoopingThis enable the IGMP snooping function .rw Enumeration .1.3.6.1.4.1.8691.7.86.1.20.1.4 |
multicastFastForwardingThis Enable Multicast Fast Forwarding Mode function .rw Enumeration .1.3.6.1.4.1.8691.7.86.1.20.1.7 |
staticMulticast OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.20.2 |
staticMulticastTableThe static multicast table. SEQUENCE OF StaticMulticastEntry .1.3.6.1.4.1.8691.7.86.1.20.2.1 |
staticMulticastEntryStatic multicast Entry. StaticMulticastEntry .1.3.6.1.4.1.8691.7.86.1.20.2.1.1 |
staticMulticastAddressThe static multicast address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.20.2.1.1.1 |
staticMulticastPortsThe port map of the static multicast address.rw PortList .1.3.6.1.4.1.8691.7.86.1.20.2.1.1.2 |
staticMulticastStatusThe status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then active. Use destroy to delete this row.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.20.2.1.1.3 |
gmrp OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.20.3 |
gmrpSettingTableThe GMRP setting table. SEQUENCE OF GmrpSettingEntry .1.3.6.1.4.1.8691.7.86.1.20.3.1 |
gmrpSettingEntryThe GMRP Setting Entry. GmrpSettingEntry .1.3.6.1.4.1.8691.7.86.1.20.3.1.1 |
enableGMRPEnable/Disable GMRP.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.20.3.1.1.1 |
gmrpTableThe GMRP status table. SEQUENCE OF GmrpEntry .1.3.6.1.4.1.8691.7.86.1.20.3.2 |
gmrpEntryThe GMRP Status Entry. GmrpEntry .1.3.6.1.4.1.8691.7.86.1.20.3.2.1 |
gmrpMulticastGroupGMRP multicast group.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.20.3.2.1.1 |
gmrpFixedPortsThe ports that joined GMRP multicast group manually.ro PortList .1.3.6.1.4.1.8691.7.86.1.20.3.2.1.2 |
gmrpLearnedPortsThe ports that joined GMRP multicast group by GMRP learning.ro PortList .1.3.6.1.4.1.8691.7.86.1.20.3.2.1.3 |
rateLimiting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.21 |
normalModeRateLimitingIngressTableThe rate limiting table. SEQUENCE OF NormalModeRateLimitingIngressEntry .1.3.6.1.4.1.8691.7.86.1.21.1 |
normalModeRateLimitingIngressEntryRate limiting Entry. NormalModeRateLimitingIngressEntry .1.3.6.1.4.1.8691.7.86.1.21.1.1 |
limitModeThe limit mode.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.21.1.1.1 |
lowPriLimitRateThe limiting rate of low priority queue.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.21.1.1.2 |
normalPriLimitRateThe limiting rate of normal priority queue. The values being equal to or double value of lowPriLimitRate are valid for set.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.21.1.1.3 |
mediumPriLimitRateThe limiting rate of medium priority queue. The values being equal to or double value of normalPriLimitRate are valid for set.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.21.1.1.4 |
highPriLimitRateThe limiting rate of high priority queue. The values being equal to or double value of mediumPriLimitRate are valid for set.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.21.1.1.5 |
egressLimitThe ingress limit mode.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.21.1.1.6 |
portDisableMode OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.21.3 |
portDisableModePeriodCheck time.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.21.3.1 |
portDisableModeTableThe rate limiting table. SEQUENCE OF PortDisableModeEntry .1.3.6.1.4.1.8691.7.86.1.21.3.2 |
portDisableModeEntryRate limiting Entry. PortDisableModeEntry .1.3.6.1.4.1.8691.7.86.1.21.3.2.1 |
ingressLimitThe ingress limit mode.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.21.3.2.1.1 |
rateLimitingModeThe rate limiting mode.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.21.4 |
security OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.22 |
userLoginSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.22.1 |
userLoginServerSet user login server option.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.22.1.1 |
tacacsServerSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.22.1.2 |
tacacsLoginAuthServerSet Tacacs+ Server IP Address/Domain name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.22.1.2.1 |
tacacsLoginAuthPortSet Tacacs+ Port.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.22.1.2.2 |
tacacsLoginAuthSharedKeySet Tacacs+ Shared Key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.22.1.2.3 |
tacacsLoginAuthAuthTypeSet Tacacs+ Shared Key.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.22.1.2.4 |
tacacsLoginAuthTimeoutSet Tacacs+ Shared Key.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.22.1.2.5 |
radiusServerSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.22.1.3 |
radiusLoginAuthServerSet Radius Server IP Address/Domain name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.22.1.3.1 |
radiusLoginAuthPortSet Radius Port.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.22.1.3.2 |
radiusLoginAuthSharedKeySet Radius Shared Key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.22.1.3.3 |
radiusLoginAuthAuthTypeSet Radius Shared Key.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.22.1.3.4 |
radiusLoginAuthTimeoutSet Radius Shared Key.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.22.1.3.5 |
portAccessControl OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.22.2 |
staticPortLock OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.22.2.1 |
staticPortLockAddressThe static port lock address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.22.2.1.1 |
staticPortLockPortThe port of the static port lock address.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.22.2.1.2 |
staticPortLockStatusThe status is active to indicate normal. Use createAndGo to create new on multiple SET.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.22.2.1.3 |
dot1x OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.22.2.2 |
dataBaseOptionSet IEEE 802.1X database option.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.22.2.2.1 |
dot1xReauthEnableEnable/Disable IEEE 802.1X Re-authentication.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.22.2.2.5 |
dot1xReauthPeriodSet IEEE 802.1X Re-authentication Period.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.22.2.2.6 |
dot1xSettingTableIEEE 802.1X Port Setting Table. SEQUENCE OF Dot1xSettingEntry .1.3.6.1.4.1.8691.7.86.1.22.2.2.7 |
dot1xSettingEntryIEEE 802.1X Port Setting Entry. Dot1xSettingEntry .1.3.6.1.4.1.8691.7.86.1.22.2.2.7.1 |
enableDot1XEnable/Disable IEEE 802.1X.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.22.2.2.7.1.1 |
dot1xReauthTableIEEE 802.1X Re-authentication Table. SEQUENCE OF Dot1xReauthEntry .1.3.6.1.4.1.8691.7.86.1.22.2.2.8 |
dot1xReauthEntryIEEE 802.1X Re-authentication Entry. Dot1xReauthEntry .1.3.6.1.4.1.8691.7.86.1.22.2.2.8.1 |
dot1xReauthPortIndexIEEE 802.1X Enabled Port Index.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.22.2.2.8.1.1 |
dot1xReauthReauth IEEE 802.1X.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.22.2.2.8.1.2 |
dot1xRadius OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.22.2.2.9 |
dot1xSameAsAuthServerSet Radius Server IP Address/Domain name.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.22.2.2.9.1 |
dot1x1stRadiusServerSet Radius Server IP Address/Domain name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.22.2.2.9.2 |
dot1x1stRadiusPortSet Radius Port.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.22.2.2.9.3 |
dot1x1stRadiusSharedKeySet Radius Shared Key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.22.2.2.9.4 |
dot1x2ndRadiusServerSet Radius Server IP Address/Domain name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.22.2.2.9.5 |
dot1x2ndRadiusPortSet Radius Port.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.22.2.2.9.6 |
dot1x2ndRadiusSharedKeySet Radius Shared Key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.22.2.2.9.7 |
portAccessControlTableThe Port Access Control table. SEQUENCE OF PortAccessControlEntry .1.3.6.1.4.1.8691.7.86.1.22.2.3 |
portAccessControlEntryThe Port Access Control table entry. PortAccessControlEntry .1.3.6.1.4.1.8691.7.86.1.22.2.3.1 |
portAccessControlAddressThe MAC address which is static locked or IEEE 802.1X authorized.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.22.2.3.1.1 |
portAccessControlPortNoThe port number that the Port Access Control address resides.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.22.2.3.1.2 |
portAccessControlAccessStatusThe access status of the Port Access Control address.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.22.2.3.1.3 |
portAccessControlStatusThe status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then active. Use destroy to delete this row.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.22.2.3.1.4 |
accessibleIP OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.30 |
enableAccessibleIPEnable the accessible IP address list.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.30.1 |
accessibleIpTableaccessibleIP. SEQUENCE OF AccessibleIpEntry .1.3.6.1.4.1.8691.7.86.1.30.2 |
accessibleIpEntryAccessible IP address entry. AccessibleIpEntry .1.3.6.1.4.1.8691.7.86.1.30.2.1 |
accessibleIpAddressAccessible IP addressrw IpAddress .1.3.6.1.4.1.8691.7.86.1.30.2.1.1 |
accessibleIpNetMaskAccessible IP netmask.rw IpAddress .1.3.6.1.4.1.8691.7.86.1.30.2.1.2 |
accessibleIpStatusThe status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then active. Use destroy to delete this row.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.30.2.1.3 |
sysFileUpdate OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.31 |
tftpServerThe TFTP Server name(IP Address)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.31.1 |
firmwarePathNameThe path name of firmware file in the TFTP Serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.31.2 |
logPathNameThe path name of log file in the TFTP Serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.31.3 |
confPathNameThe path name of configuration file in the TFTP Serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.31.4 |
tftpUpdaterw Enumeration .1.3.6.1.4.1.8691.7.86.1.31.5 |
timeSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.32 |
sysDateTimeThe date time of systemrw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.32.1 |
calibratePeriodThe period (seconds) that calibrate with time serverrw INTEGER .1.3.6.1.4.1.8691.7.86.1.32.2 |
timeServer1The first time serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.32.3 |
timeServer2The second time serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.32.4 |
daylightSaving OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.32.5 |
startMonthSetting Start Month of Daylight Saving timerw Enumeration .1.3.6.1.4.1.8691.7.86.1.32.5.1 |
startWeekSetting Start Week of Daylight Saving timerw Enumeration .1.3.6.1.4.1.8691.7.86.1.32.5.2 |
startDaySetting Start Day of Daylight Saving timerw Enumeration .1.3.6.1.4.1.8691.7.86.1.32.5.3 |
startHourSetting Start Hour of Daylight Saving timerw INTEGER .1.3.6.1.4.1.8691.7.86.1.32.5.4 |
endMonthSetting End Month of Daylight Saving timerw Enumeration .1.3.6.1.4.1.8691.7.86.1.32.5.5 |
endWeekSetting End Week of Daylight Saving timerw Enumeration .1.3.6.1.4.1.8691.7.86.1.32.5.6 |
endDaySetting End Day of Daylight Saving timerw Enumeration .1.3.6.1.4.1.8691.7.86.1.32.5.7 |
endHourSetting End Hour of Daylight Saving timerw INTEGER .1.3.6.1.4.1.8691.7.86.1.32.5.8 |
offsetHoursSetting Offset Hours of Daylight Saving timerw INTEGER .1.3.6.1.4.1.8691.7.86.1.32.5.9 |
enableNTPServerThis enable NTP Server.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.32.6 |
timeProtocolOptionTime Protocol.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.32.7 |
dipSwitchSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.34 |
dipSwitchEnableTurboRingEnable TurboRing Dip Switch functionsrw Enumeration .1.3.6.1.4.1.8691.7.86.1.34.1 |
dipSwitchTurboRingPoleThe TurboRing Pole status of Dip switch.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.34.2 |
dipSwitchRingCouplingPoleThe Ring Coupling Pole status of Dip switch.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.34.3 |
dipSwitchRingMasterPoleThe Ring Master Pole status of Dip switch.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.34.4 |
backupMediaSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.35 |
backupMediaAutoLoadEnable Abc-01 backupMedia configuration PowerOn Auto Load functionsrw Enumeration .1.3.6.1.4.1.8691.7.86.1.35.1 |
enableWarmStartEnable to restart MOXA ethernet switch.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.36 |
syslogSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.37 |
syslogServer1The syslog server 1rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.37.1 |
syslogServer1portThe syslog server 1 portrw INTEGER .1.3.6.1.4.1.8691.7.86.1.37.2 |
syslogServer2The syslog server 2rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.37.3 |
syslogServer2portThe syslog server 2 portrw INTEGER .1.3.6.1.4.1.8691.7.86.1.37.4 |
syslogServer3The syslog server 3rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.37.5 |
syslogServer3portThe syslog server 3 portrw INTEGER .1.3.6.1.4.1.8691.7.86.1.37.6 |
dhcpRelayAgentSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.39 |
dhcpServer1The dhcp Relay Agent Server 1.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.39.1 |
dhcpServer2The dhcp Relay Agent Server 2.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.39.2 |
dhcpServer3The dhcp Relay Agent Server 3.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.39.3 |
dhcpServer4The dhcp Relay Agent Server 4.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.39.4 |
option82Setting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.39.5 |
enableOption82Enable DHCP Option 82rw Enumeration .1.3.6.1.4.1.8691.7.86.1.39.5.1 |
option82TypeOption 82 Type selectorrw Enumeration .1.3.6.1.4.1.8691.7.86.1.39.5.2 |
option82ValueOption 82 Type Valuerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.39.5.3 |
option82ValueDisplayOption 82 Type Value Displayro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.39.5.4 |
dhcpFunctionTableDHCP Function Table. SEQUENCE OF DhcpFunctionEntry .1.3.6.1.4.1.8691.7.86.1.39.6 |
dhcpFunctionEntryDHCP Function Table Entry. DhcpFunctionEntry .1.3.6.1.4.1.8691.7.86.1.39.6.1 |
dhcpPortIndexThe DHCP Port Index.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.39.6.1.1 |
circuitIDThe Circuit ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.39.6.1.2 |
option82EnableThis enable option 82 of the port.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.39.6.1.3 |
poeSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.40 |
poePortTablePoe Port Function Table. SEQUENCE OF PoePortEntry .1.3.6.1.4.1.8691.7.86.1.40.3 |
poePortEntryPoe Port Function Table Entry. PoePortEntry .1.3.6.1.4.1.8691.7.86.1.40.3.1 |
poePortIndexPoE port index.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.40.3.1.1 |
poePortEnablePoE port Enable.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.40.3.1.2 |
poePowerOutputModePoE port Power Output Mode.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.40.3.1.3 |
powerLimitPoE Port Power Budgetrw INTEGER .1.3.6.1.4.1.8691.7.86.1.40.3.1.4 |
pdfailurePD check Enable per port.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.40.3.1.5 |
pdipaddrPD ip address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.40.3.1.6 |
pdPollingIntervalPD check intervalrw INTEGER .1.3.6.1.4.1.8691.7.86.1.40.3.1.7 |
poeporttimetablingPoE port timetablingrw Enumeration .1.3.6.1.4.1.8691.7.86.1.40.3.1.8 |
poeTimeTablePoE Time Table. SEQUENCE OF PoeTimeEntry .1.3.6.1.4.1.8691.7.86.1.40.5 |
poeTimeEntryPoE Time Table Entry. PoeTimeEntry .1.3.6.1.4.1.8691.7.86.1.40.5.1 |
poeTPortIndexport Index for time table.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.40.5.1.1 |
poeWeekDayday index for a week.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.40.5.1.2 |
poeDayEnableEnable or not for one day.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.40.5.1.3 |
poeDayStartPoE Port Start Timerw INTEGER .1.3.6.1.4.1.8691.7.86.1.40.5.1.4 |
poeDayStopPoE Port Stop Timerw INTEGER .1.3.6.1.4.1.8691.7.86.1.40.5.1.5 |
poeStatusTablePoE Status Table. SEQUENCE OF PoeStatusEntry .1.3.6.1.4.1.8691.7.86.1.40.6 |
poeStatusEntryPoE Status Table Entry. PoeStatusEntry .1.3.6.1.4.1.8691.7.86.1.40.6.1 |
poePortStatusPoE port Status.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.40.6.1.1 |
poePortConsumptionPoE port Consumptionro INTEGER .1.3.6.1.4.1.8691.7.86.1.40.6.1.2 |
poePortVoltagePoE port Voltagero INTEGER .1.3.6.1.4.1.8691.7.86.1.40.6.1.3 |
poePortCurrentPoE port Currentro INTEGER .1.3.6.1.4.1.8691.7.86.1.40.6.1.4 |
ieee1588Setting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.41 |
ptpv1Setting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.41.1 |
enablePtpv1This enable the PTP function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.1.1 |
clockModev1the clock mode of the PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.1.2 |
syncIntervalv1the logSyncInterval of the PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.1.3 |
subDomainNamev1The subdomain name of the PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.1.4 |
preferMasterv1This enable the PTP prefer master function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.1.5 |
ptpv2Setting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.41.2 |
enablePtpThis enable the PTP function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.2.1 |
clockModethe clock mode of the PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.2.2 |
transportthe transport mode of the PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.2.3 |
syncIntervalthe logSyncInterval of the PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.2.4 |
logMinDelayReqIntervalthe logMinDelayReqInterval of the PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.2.5 |
logMinPdelayReqIntervalthe logMinPdelayReqInterval of the PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.2.6 |
logAnnounceIntervalthe logAnnounceInterval of the PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.2.7 |
announceReceiptTimeoutthe announceReceiptTimeout of the PTP clock.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.41.2.8 |
priority1the priority1 of the PTP clock.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.41.2.9 |
priority2the priority2 of the PTP clock.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.41.2.10 |
clockClassthe clockClass of the PTP clock.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.41.2.11 |
domainNumberThe domain number of the PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.2.12 |
localUtcOffsetthe UTC offset of the local PTP clock.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.41.2.13 |
localUtcOffsetValidthe UTC offset valid of the local PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.2.14 |
localLeap59the leap59 of the local PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.2.15 |
localLeap61the leap61 of the local PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.2.16 |
localPtpTimescalethe timescale of the local PTP clock.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.2.17 |
localArbTimethe ARB time of the local PTP clock.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.41.2.18 |
ptpv1Status OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.41.3 |
offsetToMasterv1The offset to master for nsec.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.41.3.1 |
meanPathDelayv1The mean path delay of the PTP clock.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.41.3.2 |
grandMasterUuidv1The grand master UUID address of the PTP clock.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.41.3.3 |
parentUuidv1The parent master UUID address of the PTP clock.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.41.3.4 |
clockStratumv1The clock stratum of the PTP clock.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.41.3.5 |
clockIdentifierv1The clock identifier of the PTP clock.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.41.3.6 |
ptpv2Status OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.41.4 |
offsetToMasterThe offset to master for nsec.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.41.4.1 |
meanPathDelayThe mean path delay of the PTP clock.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.41.4.2 |
parentIdentityThe parent identity of the PTP clock.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.41.4.3 |
grandmasterIdentityThe grandmaster identity of the PTP clock.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.41.4.4 |
grandmasterClockClassThe grandmaster clockClass of the PTP clock.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.41.4.5 |
grandmasterClockAccuracyThe grandmaster clockAccuracy of the PTP clock.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.41.4.6 |
grandmasterPriority1The grandmaster priority1 of the PTP clock.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.41.4.7 |
grandmasterPriority2The grandmaster priority2 of the PTP clock.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.41.4.8 |
stepsRemovedThe steps removed of the PTP clock.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.41.4.9 |
currentUtcOffsetThe current utc offset of the PTP clock.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.41.4.10 |
currentUtcOffsetValidThe current utc offset valid flag of the PTP clock.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.41.4.11 |
leap59The leap59 of the PTP clock.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.41.4.12 |
leap61The leap61 of the PTP clock.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.41.4.13 |
ptpTimescaleThe ptp timescale of the PTP clock.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.41.4.14 |
timesourceThe timesource of the PTP clock.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.41.4.15 |
ptpPortTableThe ptp port table. SEQUENCE OF PtpPortEntry .1.3.6.1.4.1.8691.7.86.1.41.5 |
ptpPortEntryThe ptp port entry. PtpPortEntry .1.3.6.1.4.1.8691.7.86.1.41.5.1 |
ptpPortIndexThe ptp port index.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.41.5.1.1 |
ptpPortEnableThis enable the ptp port.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.41.5.1.2 |
ptpPortStatusThis port status of the PTP clock.ro Enumeration .1.3.6.1.4.1.8691.7.86.1.41.5.1.3 |
diagnosis OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.42 |
lldpSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.42.1 |
enableLLDPThis enable the LLDP function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.42.1.1 |
lldpMSGIntervalThe LLDP message transmit interval.rw INTEGER .1.3.6.1.4.1.8691.7.86.1.42.1.2 |
webTimeoutWeb Timeoutrw INTEGER .1.3.6.1.4.1.8691.7.86.1.43 |
ageTimeWeb Timeoutrw INTEGER .1.3.6.1.4.1.8691.7.86.1.44 |
garpSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.45 |
joinTimeJoin Time (ms).rw INTEGER .1.3.6.1.4.1.8691.7.86.1.45.1 |
leaveTimeLeave Time (ms).rw INTEGER .1.3.6.1.4.1.8691.7.86.1.45.2 |
leaveAllTimeLeaveall Time (ms).rw INTEGER .1.3.6.1.4.1.8691.7.86.1.45.3 |
eventlog OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.46 |
eventlogTableThe table of eventlog. SEQUENCE OF EventlogEntry .1.3.6.1.4.1.8691.7.86.1.46.1 |
eventlogEntryThe table entry of eventlog. EventlogEntry .1.3.6.1.4.1.8691.7.86.1.46.1.1 |
eventlogIndexThe index of eventlog entry.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.46.1.1.1 |
eventlogBootupThe reboot count of the system.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.46.1.1.2 |
eventlogDateThe date of the event occurred.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.46.1.1.3 |
eventlogTimeThe time of the event occurred.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.46.1.1.4 |
eventlogUptimeThe time of the event occurred after booting up.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.46.1.1.5 |
eventlogEventThe event which occurred in the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.7.86.1.46.1.1.6 |
eventlogClearTo clear the eventlog, set value 1 to this field.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.46.2 |
industrialProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.47 |
eipSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.47.1 |
enableEtherNetIPThis enable the EtherNet/IP function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.47.1.1 |
modbusTCPSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.1.47.2 |
enableModbusTCPThis enable the Modbus TCP function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.47.2.1 |
enableFactoryDefaultReset all EtherDevice switch settings to factory default valuesrw Enumeration .1.3.6.1.4.1.8691.7.86.1.48 |
consoleLoginModeThis option can change console login mode.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.51 |
cpuLoading5sCPU Loading for the past 5 seconds in %.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.53 |
cpuLoading30sCPU Loading for the past 30 seconds in %.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.54 |
cpuLoading300sCPU Loading for the past 5 minutes in %.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.55 |
totalMemoryTotal size of System RAM.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.56 |
freeMemoryTotal size of free dynamic memoryro INTEGER .1.3.6.1.4.1.8691.7.86.1.57 |
usedMemoryTotal size of used dynamic memoryro INTEGER .1.3.6.1.4.1.8691.7.86.1.58 |
memoryUsageThe usage of memory size in %.ro INTEGER .1.3.6.1.4.1.8691.7.86.1.59 |
loopProtectionThis enable the Loop Protection function.rw Enumeration .1.3.6.1.4.1.8691.7.86.1.61 |
swTraps OBJECT IDENTIFIER .1.3.6.1.4.1.8691.7.86.2 |
varconfigChangeTrapThe configuration has been changed.ro Enumeration .1.3.6.1.4.1.8691.7.86.2.1 |
varpower1TrapThe power on/off changed.ro Enumeration .1.3.6.1.4.1.8691.7.86.2.2 |
varpower2TrapThe power on/off changed.ro Enumeration .1.3.6.1.4.1.8691.7.86.2.3 |
vartrafficOverloadTrapThe ethernet port's traffic loading exceeds the pre-defined value.ro INTEGER .1.3.6.1.4.1.8691.7.86.2.4 |
varredundancyTopologyChangedTrapThe redundancy topology has been changed.ro Enumeration .1.3.6.1.4.1.8691.7.86.2.5 |
varturboRingCouplingPortChangedTrapThe coupling path of Turbo Ring has been changed.ro Enumeration .1.3.6.1.4.1.8691.7.86.2.6 |
varturboRingMasterChangedTrapThe master of Turbo Ring has been changed.ro Enumeration .1.3.6.1.4.1.8691.7.86.2.7 |
varPoEWarningTrapThe POE warning message.ro Enumeration .1.3.6.1.4.1.8691.7.86.2.16 |